30 Vibration Testing Jobs

Review product designs for compliance with international safety standards (IEC 60950-1, 60335-1, 60065, 62368-1). Conduct safety analysis, risk assessments, and technical evaluations. Prepare, execute, and document safety test procedures and test reports. Interface with certification bodies and testing laboratories for safety approvals. Support the design team in implementing safety-related design modifications. Interpret schematics, layouts, and bills of materials for safety evaluation. Conduct failure analysis and assist with root cause determination for non-compliance issues. Maintain up-to-date knowledge of safety standard revisions and their applicability. Preferred candidate profile Ba...

Role Overview: As a Power Systems Engineer at Catalyx Space, you will be responsible for overseeing the spacecraft Electrical Power System (EPS) from power budgets and architecture to build, test, integration, and on-orbit support. Key Responsibilities: - Define satellite power budgets based on mission profile, subsystems, and orbit. - Architect EPS including solar array conditioning, Battery Management System (BMS), and regulated/unregulated buses. - Create schematics and PCBs, select converters, regulators, and Power Distribution Unit (PDU) components. - Analyze efficiency, thermal performance, redundancy, and fault-tolerance of the system. - Develop and validate Maximum Power Point Tracki...

Design and execute mechanical tests, prototype evaluations, and material characterization activities. Handle and troubleshoot vacuum systems, pumps, and thermal control systems used in experimental setups. PLC-based machine setup Required Candidate profile Mechanical Engineer with 5 years of experience in mechanical testing, lab operations, or product development. Vacuum systems, temperature control setups, and thermal/mechanical instrumentation.

We are looking for a Hardware Design Engineer to design, develop, and qualify spacecraft avionics hardware. This includes schematics for the Onboard Computer (OBC), subsystem controllers, payload interfaces, and mission-specific electronics. You will be responsible for taking designs from concept through schematics, PCB layout, testing, and qualification, while ensuring compliance with space standards. The role also requires performing FMECA, component procurement, and supporting cross-functional teams in building reliable hardware for space missions. Key Responsibilities: Design schematics for OBC, EPS, communication units, ADCS, and payload interfaces. Develop, simulate, and validate circu...

Has working experience on Metallurgical, Mechanical, Climatic Chambers, Vibration Shakers and Chemical testing. Should have knowledge of different materials used in Automobiles. Required Candidate profile Candidates with BE Mech. or B. Tech in Plastic Technology (from CIEPT or equivalent) having 2 to 5 years of experience in Testing. Laboratory management, Material Testing, DVP Testing.

Operate and monitor test & production machines as per defined procedures. Generate test reports and maintain accurate records of machine performance/results. Perform routine checks and assist in preventive maintenance activities. Office cab/shuttle Health insurance Annual bonus Provident fund

We are seeking an experienced Quality Control Inspector with expertise in DIMENSIONAL INSPECTION AND VISUAL INSPECTION. Candidate must be from mechanical background. Required Candidate profile Mechanically inclined individual with minimum 6 months experience in quality control. Must possess knowledge of stamping, molding or machined components. Gauges and other instrument knowledge.

Environment Monitoring Implement environmental activities Noise , Vibration control Waste water management Air quality management Ensure compliance with Central, State Pollution , Ministry of Environment Equipment Compliance Required Candidate profile Experience in Environmental Science Operation Monitoring Notice Period 30 days

Environment Monitoring Implement environmental activities Noise , Vibration control Waste water management Air quality management Ensure compliance with Central, State Pollution , Ministry of Environment Equipment Compliance Required Candidate profile Experience in Environmental Science Operation Monitoring Notice Period 30 days

Interested candidates shall apply through : https://elgi.darwinbox.in/ms/candidate/a61e65404e890b/careers/a68bbcd3503013 Job Description: Provide implementable solutions from proven concepts and analytical models within the boundaries of product development on source and transmission control for target acoustic design requirements of compressors. Develop design tools & methodology using principles of acoustics and fluid dynamics through mathematical formulations and modelling of subsystems and solutioning in MATLAB towards the prediction of acoustic behaviour of systems. Responsible for development and validation of design proposals and solutions influencing acoustic targets by working toget...

Role & responsibilities: • Create product verification and validation plan based on new content on each NPD program Identify the risks at design stage and prepare risk mitigation plan for risk reduction. Should be able to identify active and passive risks Responsible for proto builds, test and validation of compactor and paver machines Able to perform functional tests on machines, capture data and prepare test report for compliance Ability to plan the development builds, capture improvement points and drive implementation of improvements Daily, weekly resource planning which includes people, materials and instruments Act as a agent between design and validation team, signing off prodct compl...

Digantara is a leading Space Surveillance and Intelligence company focused on ensuring orbital safety and sustainability. With expertise in space-based detection, tracking, identification, and monitoring, Digantara provides comprehensive domain awareness across regimes, allowing end users to have actionable intelligence on a single platform. At the core of its infrastructure lies a sophisticated integration of hardware and software capabilities aligned with the key principles of situational awareness: perception (data collection), comprehension (data processing), and prediction (analytics). This holistic approach empowers Digantara to monitor all Resident Space Objects (RSOs) in orbit, foste...

Role & responsibilities Bachelors / Master’s degree in Electrical / Electronic / Electromechanical or in “STEM” Majors (Science, Technology, Engineering and Math) or equivalent 8+ years of experience in testing and validating electromechanical components, with a focus on relays, contactors, MCBs, and other low-voltage switchgear Responsibilities: Experience in verification and Validation of Low voltage switchgear products like Relays or similar products Strong knowledge on Lab instruments like Power source, Oscilloscope, Data loggers etc Develop comprehensive testing and validation plans for new and existing electromechanical components Identify and document boundary conditions and worst-cas...

The ideal candidate for this position should hold a BE/B. Tech or ME/M. Tech degree in Mechanical Engineering or a related field. Additionally, a minimum of 2-3 years of industrial experience in the role of a Project Engineer in Advanced Manufacturing is required. The candidate should possess the following skillset: - Proficiency in CAE and CFD software such as Simcenter 3D software, STAR CCM, HEEDS, Amesim, and Testlab Ansys. - In-depth understanding of mechanical engineering fundamentals including Strength of Materials, failure theories, and mechanical vibrations. - Experience in structural simulation of electrical components and electromagnetic analysis. - Proficiency in Finite Element An...

The ideal candidate for this position should hold a BE/ B. Tech or ME/ M. Tech degree in Mechanical Engineering or a related field. Additionally, they should have a minimum of 2-3 years of industrial experience as a Project Engineer in Advanced manufacturing or related fields. Key skills required for this role include proficiency in CAE and CFD Software such as Simcenter 3D software, STAR CCM, HEEDS, Amesim, and Testlab Ansys. The candidate should have a strong understanding of mechanical engineering fundamentals, including knowledge of Strength of Materials, failure theories, and mechanical vibrations. Experience in structural simulation of electrical components and electromagnetic analysis...

You will be responsible for providing support in Mechanical & Hydraulics Reliability testing for various projects such as HPCL 3.3K, VAVE, GEP, Evolve Pulsar phase 1, AdBlue, Electronics Reliability testing, and more. Your role will involve handling Electronic & Electrical components, creating Vendor permissions, and maintaining a safe work environment by adhering to 5S standards. Your duties will include assembling & dismantling Electronics components, using test equipment, test chambers, gauges, Motors, conducting Environment chamber testing, EMI/EMC Testing, and Shipment testing which involves vibration testing, drop test, etc. You should have exposure to Electronics products and possess ...

Responsibilities: * Conduct reliability testing on products * Perform environmental, lab, vibration & mechanical tests * Analyze failures through failure analysis * Execute functional & thermal tests for electronic products

Job Summary We are looking for a versatile and detail-oriented Testing Engineer to support a wide range of validation activities in our Automotive Test Laboratory. The role includes executing mechanical, electrical, vibration, and environmental tests to ensure product compliance with quality and durability standards across various automotive domains. Key Responsibilities Plan and conduct component and system-level tests for automotive applications. Set up test benches and configure sensors for mechanical, electrical, and environmental validation. Operate and maintain test equipment such as vibration shakers, climate chambers, endurance rigs etc. Analyze data and ensure adherence to OEM and i...

Testing and validation engineer required at kundli sonipat Qualification- Diploma/ b.tech electronics Exp- min 2 yrs Salary- upto 25k- 30k Skills- Power bank, charger, earphone timing- 9 to 6

Vibration testing and data analysis Natural frequency testing, damping test, sine wave test, random vibration test ED shakers & MTS actuators. RLDA data capturing & data analysis (acceleration, strain gauge, displacement & force values) Required Candidate profile Test fixture design and making different test setup MTS software – MBT & RPC software Vibration, damping, ASD, FFT, Spectral analysis & filters, etc.. Note: MTS Software experience is majorly needed.

X-Ray machine operation. Radiagraph and CT scan interpretation. ELORA operations and Management. MS word/Excel/Power point for lab report preparation and documentation. Vibration and Material testing monitoring. Required Candidate profile RSO certified fulfil legal compliance on AERB portal Lab test report preparation of routine validation products as well as group companies testing.

Material Development & Prototyping Project Leadership Acoustic Testing & Analysis Data Management & Reporting OEM Compliance & Validation Food allowance Provident fund Annual bonus

Oversee all testing operations including Pressure Testing, Tensile Testing, Torsion Testing, Bending Testing, Continuous Bending Testing, Compression Testing, Vibration Testing, & High Voltage Testing, Eccentricity, Parallelism, Mis alignment Required Candidate profile Strong expertise in electrical & mechanical testing methodologies In-depth knowledge of IEC standards (60168, 60383, 60255, 17025) Proven experience in managing large teams (50+ workers)

We are seeking a dedicated and detail-oriented Testing Engineer to join our team. The ideal candidate will be responsible for performing various types of product testing, maintaining test records, and assisting the Senior Testing Engineer in day-to-day operations. This is an excellent opportunity for both freshers and experienced professionals looking to build a career in product testing and quality assurance. Key Responsibilities: Conduct testing of HT & LT cables, ACSR conductors, and covered conductors. Perform transformer testing and electronic product testing (including ADPM, power banks, adapters, etc.). Execute vibration testing procedures and ensure safety compliance. Review and main...

Role & responsibilities Quality control Inspections, electronics and mechanical components Inspection, Inward material inspection, Electronics testing, Field visits, BOM making. Preferred candidate profile