551 Vfd Jobs - Page 22

Knowledge of PLC system Knowledge of PLC, SCADA, HMI Programming Software's. Hands-on experience in PLC Programming, On-site Testing, Commissioning Knowledge of installation testing VFD Programming including different types of VFDs their application

Role & responsibilities We are seeking a highly skilled Purchase engineer specializing in purchasing of electrical items like Electrical Panel, cables, motors, bought out components, Switch gears, PLC, VFD, Instruments like sensors, gauges, switches etc. The electrical buyer typically requires a minimum of 5 years of experience in the field of electrical buying in an engineering company. Responsible for Electrical Panel buying must know calculation panel manufacturing cost. Responsible for buying of Electrical items like Motor, Switch gears, PLC, Understanding P&Id, cable schedule, hook-up drawing, cause & effect, operation philosophy will be an added advantage. Responsible for buying CE, ATEX marked Certified items Must have experience in rate contracts of regular purchasing items. Must have good negotiation skills. Working on SAP will also be an added advantage Knowledge of Automation components Cable scheduling, Field Instrumentation. Cooperate and communicate effectively with project manager and other project participants to aid and technical support. Selection of right electrical good while creating PO. Preferred candidate profile

Control Panel Design Engineer Experience: 3-4 Years of relevant experience in the Understanding scope of supply, making BOM, Designing of Electrical control drawing like SLD, GA, of panels /Automation Systems.

1. *Design and Development*: Design, develop, and implement industrial automation systems, including control systems, robotics, and machine vision. 2. *System Integration*: Integrate automation systems with existing manufacturing processes and equipment. 3. *Troubleshooting*: Troubleshoot and resolve issues with automation systems, identifying root causes and implementing corrective actions. 4. *Maintenance and Upgrades*: Perform routine maintenance and upgrades on automation systems to ensure optimal performance and reliability. 5. *Collaboration*: Collaborate with cross-functional teams, including production, maintenance, and engineering, to identify automation opportunities and implement solutions. *Requirements* 1. *Education*: Bachelor's degree in Electrical Engineering, Electronics Engineering, or related field. 2. *Experience*: Proven experience in industrial automation, control systems, and robotics. 3. *Technical Skills*: Proficiency in programming languages such as PLC, SCADA, and robotics. 4. *Analytical Skills*: Strong analytical and problem-solving skills, with the ability to troubleshoot complex issues. 5. *Communication*: Excellent communication and collaboration skills, with the ability to work effectively with cross-functional teams. *Preferred Qualifications* 1. *Certifications*: Certifications in industrial automation, control systems, or robotics are desirable. 2. *Experience with Specific Technologies*: Experience with specific automation technologies, such as Allen-Bradley or Siemens, is a plus. 3. *Project Management*: Experience with project management and leadership is desirable. Role & responsibilities Preferred candidate profile

We are searching for a detail-orientated, deadline-driven service engineer to join our growing company. The service engineers responsibilities involve developing, coding, modelling, and evaluating automated machinery or systems intended to perform specific tasks. From conception to the prototype, they will work with automated equipment. You should provide friendly, efficient service at all times. Qualifications BE/Diploma in EE/EC/EEE/IC Positive Attitude Responsibilities Should have deep knowledge in PLC Automation mostly (Siemens, Beckhoff, Lenze). Experience in SCADA Report, Data log etc. function. Should have an ability to identify and troubleshoot the malfunctions, replacing parts and components. Experience in troubleshooting in PLC, HMI, Server System (S7-300, S7-400, S7-1200, S7-1500 and other automation products like Drives (G120C, G120, S120 and VFD, HMI) structure. Should be familiar with safety procedures while carrying out electrical work. Should have knowledge of Electrical control system. Keep good Coordination and Communication, good relationship with Team members and Client

This is a full-time on-site role for a Design Engineer at Themis Automation Pvt. Ltd. located at Ahmedabad. The Design Engineer will be responsible for day-to-day tasks related to design engineering, computer-aided design (CAD), electrical engineering, and product design. Qualifications BE/Diploma in EE/EC/EEE/IC Knowledge of Autocad-2D % 3D drawing & Fabrication/Structure drawing Knowledge of PLC, VFD, LT MCC Panel & Switchgear Can co-ordinate with Sales / Service / Purchase / Production / Store Problem Solving/Trouble shooting Positive Attitude Responsibilities Prepare & Design various type of electrical panel in E-Plan/Auto cad. Preparing necessary design reports and documentation. Candidate should have a self-leaning mindset. An ability to learn new things, apply new things, and evolve to be the best design engineer. Prepare Schematic diagram, wiring diagram, BOM correlate with Drawing, ERP BOM Entry. Testing new systems and making design changes. Responsible for Design, PLC Automation Control Panel, VFD Panel, Power Panel

We are seeking a highly motivated and skilled Product Sales Manager to join our dynamic team at THEMIS AUTOMATION PVT. LTD., AHMEDABAD, a leading industrial automation company. The successful candidate will play a crucial role in driving sales and providing technical expertise to our clients in the industrial automation sector. This position requires a combination of strong technical knowledge, excellent communication skills, and a passion for delivering innovative solutions to our customers. Qualifications BE/Diploma in EE/EC/EEE/IC Knowledge of PLC, VFD, LT MCC Panel & Switchgear Can co-ordinate with Sales / Service / Purchase / Production / Store Problem Solving/Trouble shooting Positive Attitude Responsibilities Preparing and delivering customer presentations and demonstrations of the product, articulately and confidently. Marketing and promoting a portfolio of products. Understanding customers diverse, specific business needs and applying product knowledge to meet those needs. Meeting sales targets set by managers and contributing to team targets. Identify emerging markets and market shifts while being fully aware of new products and competition status. Ensuring quality of service by developing a thorough and detailed knowledge of technical specifications and other features Identifying and developing new business. Networking with existing customers in order to maintain links and promote additional products and upgrades. Design and implement a strategic business plan that expands companys customer base and ensure its strong presence.

Apply now » .buttontext67bbcd0b84b126cf a{ border1px solid transparent; } .buttontext67bbcd0b84b126cf a:focus{ border1px dashed #00a3e0 !important; outlinenone !important; } Currently at TechnipFMC? Apply here. Senior Engineer- Flow Control Location: Hyderabad, IN #job-location.job-location-inline {displayinline;} Employment type: Employee Place of work: Office Offshore/Onshore: Onshore .buttontext3b34abe12d83182e a{ border1px solid transparent; } .buttontext3b34abe12d83182e a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } .buttontexta77353c8ab1a0824 a{ border1px solid transparent; } .buttontexta77353c8ab1a0824 a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } TechnipFMC is committed to driving real change in the energy industry. Our ambition is to build a sustainable future through relentless innovation and global collaboration – and we want you to be part of it. You’ll be joining a culture that values curiosity, expertise, and ideas as well as diversity, inclusion, and authenticity. Bring your unique energy to our team of more than 20,000 people worldwide, and discover a rewarding, fulfilling, and varied career that you can take in anywhere you want to go. Job Purpose Provides technically complex engineering solutions in particularly challenging project environments in accordance with TechnipFMC standards, procedures and processes, schedules and budget, with a continuous concern for quality, targets, and customer satisfaction. About The Role Performs and approves engineering solutions within projects and/or operations within projects, and manufacturing, fabrication & installation sites, in accordance with department, project, manufacturing, fabrication & installation instructions, schedules & processes and HSE requirements: - Technically correct engineering analysis - Optimized engineering solutions - Technical assistance within projects, and manufacturing, fabrication, and installation sites. Approves design basis. Coordinates engineering activities on tenders and project execution. May supervise sub-contractors. Guarantees the compliance of engineering solutions with client requirements, industry standards, and Group HSE, engineering processes, and best practices for the discipline. Provides guidance and training to Engineers under supervision-coordination. Interfaces with other engineering disciplines and engineering team(s). You are meant for this job if: BS degree in Engineering preferred or equivalent with 5 to 10 years of experience in the field Strong technical skills in engineering Strong project management skills Good presentation and coaching skills Advanced organizational and problem-solving skills Understanding customer requirements and ability to translate them into product specifications Excellent command of English Skills Additional Skills .buttontextb2a1d6d26c880f7c a{ border1px solid transparent; } .buttontextb2a1d6d26c880f7c a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } Being a global leader in the energy industry requires an inclusive and diverse environment. TechnipFMC promotes diversity, equity, and inclusion by ensuring equal opportunities to all ages, races, ethnicities, religions, sexual orientations, gender expressions, disabilities, or all other pluralities. We celebrate who you are and what you bring. Every voice matters and we encourage you to add to our culture. TechnipFMC respects the rights and dignity of those it works with and promotes adherence to internationally recognized human rights principles for those in its value chain. Learnmore about TechnipFMCand find other open positions by visiting ourCareer Page. Follow us onLinkedInfor company updates. Date posted: Apr 30, 2025 Requisition number: 13023 Apply now »

B Tech Electrical / EEE 3-5 years experience Hands-on experience with VFD (Variable Frequency Drive) Maintenance expertise in an industrial setup Required Candidate profile PLC (Programmable Logic Controller) Power Systems – Knowledge in generation, transmission, and distribution of electrical power Control Systems – Design and analysis of automatic control systems

Apply to this job using the below Workday Link of Barry Wehmiller https://barrywehmiller.wd1.myworkdayjobs.com/BWCareers/job/Chennai-India/Sr-Electrical-Engineer_R016513 Job Description: Experienced Electrical Engineer adept at Electrical Design, BOM release, Production and Testing Support for Industrial Machineries and Equipment such as Printing, Packaging, Converting, Textile and Paper machineries and discrete product machineries. Education and experience: Bachelors degree in electrical engineering Minimum of 6+ years of experience in Industrial Machineries/Equipment and discrete product machineries Experience in Printing, Packaging and Converting Machines OEM is preferrable. Mandatory Tool Skills: EPLAN P8 and above (Latest version preferred) AutoCAD Electrical MS Office applications (Outlook, Teams, Excel, Word, PowerPoint, etc.) Technical Skills: Experience in calculation and selection of Motors, Drives, AC Load calculations, low and medium voltage switchgear systems, including related protective devices and relays, cables, electrical components, field devices and associated accessories based upon application & design standards. Experience in handling of low and medium voltage motor control systems (MCC), including solid state systems Experience in industrial control and protection schemes as they apply to electrical distribution systems, motor controls and electrical systems Hands on experience in preparation of single and three-line diagrams, panel IGA & OGA drawings, electrical schematics, wiring diagrams, design of cable trays & wireways and P&IDs based upon technical specifications and requirements of customer, preferably in Printing, Packaging and Converting Machines Knowledge in the principles of operation and standard electrical maintenance practices as related to electrical switchgear, generators, transformers, and power distribution equipment Knowledge of major OEM motors & emergency standby generators, uninterruptable power supplies, motor controls, generator controls, transformers, and related protective relays Knowledge of materials, components and equipment used in all aspects of electrical installations Familiar with electrical safety practices and procedures including NFPA70E and OSHA regulations Knowledge of UL508A, IEC, NEMA, British (BS), European, IS, NEC IEEE and other standards Experience in designing and testing of Safety Interlocks in compliance with safety standards based on customer requirements Experience in creating symbols, assigning metadata to fields, creating macros, 3D macros and Drilling Patterns using EPLAN Experience in creating and updating functional specifications of machines Experience in replacement of obsolete electrical parts by maintaining Form, Fit and Functions of the existing design of the machines Experience in performing risk assessment and preparing drawings and SRS documents Knowledge in GUI programming support for SmartTouch using Ignition (not mandatory but an added advantage if available) Travel: Occasional global travel may be required for this position up to 15%.

Apply now » .buttontext88d8dcea45dcd44d a{ border1px solid transparent; } .buttontext88d8dcea45dcd44d a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } SALES & MARKETING ANALYST At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview Monitor weekly claim process, perform claim review, manual override, and after posting reviews in ADR97 report, pool reservation, credit memo details etc. Manage S&D mailboxes to answer questions from distributors, help them submit and correct claims, coordinate in special approval and manual credit memo issuance, and prepare for weekly manual override etc. Raise ticket for any system issues found during daily operation. Tracking on ticket resolution status. Follow up with TEIS on issue discussion, analysis, testing and production validation Timely adjustments to S&D Policy to ensure accuracy and up-to-date esp. when there are changes Provide regular training to key stakeholders to ensure awareness, understanding of program Documentation of all special approvals and manual processed claim details and manual credit memos Can work at AMER EST time zone What your background should look like: 4+ years of experience in Customer Care or other roles with strong background in customer communication / relationship maintenance Proficient in SAP (OTC), Excel (formulas, links, dealing with large data volume), Datawarehouse (TED) Strong analytical skills to identify/evaluate problem situations for improvement opportunities and make recommendations as applicable Competencies ValuesIntegrity, Accountability, Inclusion, Innovation, Teamwork ABOUT TE CONNECTIVITY TE Connectivity plc (NYSETEL) is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, energy networks, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 9,000 engineers, working alongside customers in approximately 130 countries, TE ensures that EVERY CONNECTION COUNTS. Learn more atwww.te.com and onLinkedIn , Facebook , WeChat, Instagram and X (formerly Twitter). .videocomponent8ae3a91ad732ccb9 a{ border1px solid transparent; } .videocomponent8ae3a91ad732ccb9 a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } .buttontext13c01d781def3077 a{ border1px solid transparent; } .buttontext13c01d781def3077 a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } Location: Bangalore, KA, IN, 560076 #job-location.job-location-inline {displayinline;} City: Bangalore State: KA Country/Region: IN Travel: Less than 10% Requisition ID: 134315 Alternative Locations: Function: Sales & Marketing Job Segment Developer, Web Design, ERP, SAP, Technology, Creative, Sales Apply now »

Exciting Job Opportunities at Changepond Technologies for Electrical & Mechanical freshers to join our Chennai team !!!! Walk-in Detail:- Date - 22nd May 2025 (Thursday) Time - 09.30 am Exp - Freshers (0-2yrs) Qualification - B.E / B. Tech / Diploma (EEE, Mech, Auto, E&I) Work Location - Chennai (Siruseri IT Park) Company profile - https://www.changepond.com/ Mechanical: Applicants should have Basic tool knowledge on AutoCAD, Solid works and CREO only. Get fully prepared to work with the AutoCAD/Solidworks/CREO software tool Electrical: Applicants should have knowledge on Electrical concepts & theories, Transformers, Circuit Theory, Switchgear. Get fully prepared to work with the Basic AutoCAD software tool / PLC Programming. Eligibility: Applicants must have completed a B.E/B.Tech or Diploma in Mechanical, Electrical, or Automobile Engineering with an aggregate of more than 60% across 10th, 12th, and Diploma/B.E/B.Tech exams. (Candidates with less than 60% in any academic stage are not eligible) This opportunity is open only to graduates passed-out from 2023, 2024, and 2025. Note: We encourage interested candidates to submit their updated CVs to samuel.thomas@changepond.com or WhatsApp @ 8610406997. Your assistance in sharing this opportunity with friends and colleagues would be greatly appreciated !!!

To handle the operations and maintenance of all electrical switchgear, including PCC/MCC/HT panels, motor maintenance VFD programming, troubleshooting, etc. Implementation of various IMS policies.

Join us in the world of hardware engineering! We're seeking passionate Power Electronics and Firmware Engineers to contribute to cutting-edge projects on inverters and converters. Bachelor's or Master's degree in ECE/EEE/CSE or relevant academics 5+ years of experience in building Digital Power Controls, working with DSPs with advanced peripherals like HRPWM, SDADCs. Experience in building filters like Notch, IIR, PIR, modules like Space Vector Control, SOG', PLLs, Digital compensators Rapid learners with a knack for taking on increased responsibility Hands-on experience with hardware systems, controllers, HILs, PILS and testing debugging Solid understanding of power topologies and closed-loop systems, circuit and control theory, Softswitching mechanism, Voltage and Current Mode control. Must have experience in at least one of the following areas: Digital PFC, power Interleaving, H4/H6 Inverters, Phase shifted full bridge, Resonant converters like LLC/CLLC or DAB, high power synchronous bucWboost, bidirectional converters/inverters, Multilevel inverters, FOC Motor drives, VFDs or any advanced topology for power conversions. Experience with Tl's C2000 and FPGAs or similar controllers from ST or dsPIC for Digital Power applications Interest or experience in startup culture Proficiency in simulation tools like Simulink, PLECS, SPICE, PSIM, etc. Incorporating model-based designs and leveraging high-level block sets for firmware design. Experience with building power converters, tuning control loops, and devising strategies for finer modulation and control Handling WBG devices like GaN and SiC; building magnetics; Power Loss estimation. Using VNAs, Network and Spectrum analyzers, and high-end scopes for testing converters and inverters Knowledge on Standards and Compliance: CIL, IEC, IEEE, UL, VDE Job Description Building VS', CSIs, DC-DC, MPPT, Bidirectional systems solutions Implementing Digital Power control with advanced modulation on C2000 DSPs and FPGA. Realizing Bidirectional inverters and converters for Solar and three-phase systems. Work closely with Model-based design and Rapid Control Prototyping Conduct standard testing and benchmarking of DUT Modeling and implementing Control system and PWM techniques for modern converters and inverters for various applications Optimizing Power Density, Efficiency, Reliability of the systems. Building product ranges for GTl, Hybrid and Off-Grid inverters. Working closely with Power Electonics and Simulation Engineers in realizing optimized Power systems.

Role & responsibilities - Develop PLC and HMI programs; test and validate PLC and HMI software to ensure commissioning readiness. - Create visualization screens (e.g., Weintek, AutomationDirect). - Prepare both technical and non-technical documentation according to project deliverables. - Provide technical support to the commissioning team in North America. - Contribute to standardization and continuous improvement initiatives. - Travel to North America for short periods. - A non-traveling profile is also available. Preferred candidate profile Controls Engineer / Automation Engineer with below Must-Have Skills. In-depth knowledge of Rockwell PLC and HMI programming. Experience in commissioning automotive assembly processes like BIW weld cells or conveyor assembly lines. Good knowledge of the PLCrobot interface for various applications, such as spot welding, arc welding, dispensing, projection welding, and material handling. Additional skills required: Knowledge of VFD and Servo drives. Knowledge of Industrial networks preferably Ethernet I/P. Knowledge of Industrial safety standards and programming of safety PLCs and Safety relays. Knowledge of machine vision systems of Cognex, Keyence, Matrox, etc. Should be able to read electrical/mechanical drawings and layouts. Good knowledge of pneumatic valves and circuits. Knowledge of offline robot programming (Fanuc/KUKA) is an advantage. Basic Knowledge of programming skills such as XML, C#, J Script, VBA, Python, etc. is an advantage.

Role & responsibilities Job Title: Instrumentation Engineer Department: Engineering / Maintenance / Projects Location: Daund Reporting To: Manager Engineering / Plant Head Experience Required: 36 years in instrumentation maintenance and projects in chemical/process industries Job Purpose: To ensure effective installation, calibration, maintenance, and troubleshooting of all field instruments and control systems to support safe, efficient, and compliant plant operations. Key Responsibilities: Installation & Commissioning: Install and commission instruments like pressure/temperature/level/flow transmitters, control valves, analyzers, etc. Work with project teams during equipment upgrades and expansions. Calibration & Maintenance: Conduct periodic calibration of field instruments to ensure accuracy and reliability. Perform preventive and corrective maintenance as per schedule or breakdown needs. Troubleshooting: Diagnose faults in instruments, signal loops, and PLC/DCS interfaces. Respond quickly to breakdowns and ensure minimum production disruption. Documentation: Maintain instrument loop diagrams, calibration records, maintenance logs, and compliance documentation. Ensure up-to-date instrumentation drawings and asset register. Compliance & Safety: Ensure all instruments comply with safety, quality, and environmental standards (e.g., ATEX, IEC, ISO). Implement interlocks and safety systems for hazardous processes. Coordination: Coordinate with automation, production, and E&I teams for smooth plant operations. Work with vendors and OEMs for technical support and spare procurement. Key Requirements: Education: Diploma / B.E. / B.Tech in Instrumentation / Electronics / Electrical Engineering Experience: 3–6 years in chemical, aroma, pharmaceutical, or similar process industries Skills: Knowledge of smart field instruments (HART/FOUNDATION Fieldbus) Hands-on experience with calibration tools, signal loop testing, and control systems Basic understanding of PLC/DCS/SCADA interfacing Familiarity with hazardous area equipment and zoning Strong analytical and troubleshooting skills Preferred Industry Background: Specialty chemicals, aroma chemicals, petrochemicals, API/pharma plants, or manufacturing industries with continuous/batch processing

Deputy General Manager/ General Manager-Design & Engineering Location: Anand Reporting to: Director Design & Engineering About the role: The DGM/GM Design & Engineering will be responsible for overseeing product development, design optimization, engineering support, and cross-functional collaboration to drive innovation and operational excellence in product design and manufacturing. Responsibilities: 1. Managing the entire product development process including requirement analysis, finalizing specifications, design calculations, drawings and data, prototype building and validation. 2. Designing and implementing processes and procedures to facilitate the smooth functioning of overall production operations. 3. Analyzing existing products & processes and re-designing the same for enhancing operational efficacy, reducing wastages and achieving maximum cost savings 4. Maintaining a close relationship with Purchase Team, Quality, and Manufacturing department to facilitate new product development. 5. Developing and negotiating with vendors for development of new components or products. 6. Working with marketing and sales to build business cases and work on new products and for several Service Issues. 7. Monitoring development projects and engaging with customers for customized solution and achieving required product cost goals. 8. Preparing & executing the product development plan for all new models from different customers. 9. Creating and maintaining technical documentation including catalogues and specifications of products and components. Qualifications & Requirements: Experience: 20+ years (10 to 17 years relevant) BE/BTech/MTech Electrical (In rare cases, a Mechanical Engineer may be required. Knowledge of electrical machine design, use of VFDs, robotics and Conversant with use of ANSYS or similar simulation / motor design software, SolidWorks CAD software, though this is not a must

Dear Candidate, We are hiring the Position of PLC Engineer for Drillmec International Pvt. Ltd. Roles and Responsibilities Experience in handling maintenance, commissioning and programming of Rig PLC, HMI, VFD and Field Instruments in Oil & Gas. Development of PLC Programming on HMI screen using software. Development of ladder logic programming on PLC as per site requirement. Configuration of Radio link for wireless data communication between master PLC and remote PLC. Shall be able to access Rig software programs. Shall coordinate with Equipments OEM for Rigs Software upgrade. Shall coordinate and assist in maintaining server for data storage and assist in online portal activity. Shall have had experience in Installation and commissioning of field instruments but not limited to PID Temperature controller, RPM, RTD thermocouples, pressure switches, pressure transducers and controllers. Interested and suitable candidates can share below details and your updated CVs by Mentioning subject of " PLC Engineer " to careers@drillmecinternational.com / snaveenkumar@drillmecinternational.com For more job related updates, please follow our recruitment WhatsApp channel. https://whatsapp.com/channel/0029Vb52rZSD8SDpr06qQl1M Candidate Name : Qualification : Stream : Experience: Current Location : Native :

Senior Engineer Maintenance - Instrumentation SECTION II: ROLE To manage workshop services and job planning related to instrumentation system maintenance activities at site in order to ensure seamless and smooth operations while adhering to statutory compliance and organisational policies List of responsibilities attached to the role are documented below. These responsibilities are representative and the role holder is also responsible for any other job assigned by the superior authorities from time to time. This section is not intended to be an exhaustive listing of all activities done by the role holder. It should capture only the key responsibilities of the role. SECTION III: Responsibilities Policies, Processes and Procedures Conduct day to day activities & follow all relevant policies, processes, standard operating and maintenance procedures and instructions so that work is carried out in a controlled and consistent manner Keep self abreast with leading practices & trends and contribute to the identification of continuous improvement of systems, processes and procedures Review test procedures and formats; Standardize and implement best practices and group guidelines for instrumentation system improvement Workshop Maintenance Planning Prepare workshop instrumentation maintenance cost and budgeting and oversee adherence to the same to ensure efficient utilization Create maintenance schedules at a daily, weekly and monthly basis for instrumentation maintenance activities in coordination with planning and plant maintenance teams Create the resourcing plan as per the maintenance schedule in order to handle day-to-day workshop instrumentation maintenance activities Ensure maintenance KPIs of workshop instrumentation are met on a regular basis Workshop Maintenance Operations Review, prioritize and execute critical instrumentation maintenance activities while ensuring adherence to highest quality standards Coordinate with other functions and follow up for external repairs; Oversee maintenance of instrumentation equipment at site common areas Manage the planned turnaround and shutdown services performed on instrumentation equipment and systems to ensure they are maintained, tested and calibrated timely Manage the inventory of spare parts related to instrumentation systems, including identification of spare parts, tracking inventory levels, inspection of received materials, and ensure availability and standardization of critical spares Support in identification of root cause for failures and perform risk assessment, as well as provide inputs in trouble shooting measures that prevent repetitive failures Conduct training and skill development of team members as per requirements Compliance & Documentation Manage documentation related to compliance audit and support in ensuring adherence to statutory, HSE compliance, including RESOP, CASHe, HSEF mandatory trainings, etc. Manage repair and test records, MIS, and reporting documents related to instrumentation system maintenance and update the same in a timely manner SECTION IV: SUCCESS METRICS Safety Score of the respective Plant Production / throughput Maintenance Score of respective Plant Technical Availability of the Plant Total no. of failures No. of Repetitive failures Equipment Inspection Overdue / Extended CL Productivity CL Cost SECTION V: OPERATING NETWORK Key Interactions: Key interactions which are essential to execute the role. This will include both internal and external stakeholders Internal: Human Resource, Administration, Workshop, Planning, Security, Plant Maint, GMS etc. External: Vendor, Equipment Manufacturers, service engineers, contractors, Statutory agencies via CAD etc. SECTION VI: KNOWLEDGE AND COMPETENCIES Education Qualifications: A Bachelor's degree in Engineering/ Technology (Instrumentation/ Electronics stream) or a Master's degree in Engineering/ Technology (Instrumentation/ Electronics stream) (Preferred) Experience (Must Have & Good to Have): 4+ to 10 years of experience in industrial / instrumentation workshop maintenance (field/industry/domain) FUNCTIONAL COMPETENCIES Knowledge of instrumentation systems and its maintenance practices, and predictive diagnostic testing tools Knowledge of instrument systems codes, standards and procedures Knowledge of reliability tools such as reliability centred maintenance, FMEA Knowledge of various codes and standards Domain Knowledge of Instrumentation Engineering Conversant with Instrumentation workshop practices.

Exp: 3 years +Process Industry. Technical Skills: Strong understanding of P&ID, Process logic, Proficiency in PLC, HMI, SCADA Des. Experie in Control panel, AC VFD, Project development and commissioning, Third-party communication (VFD, MFM, DCS, PLC)

-Resolve equipment and product breakdown at the customer site. -Prepare logs of all the breakdown activities. -Ensure proper HOTO happens daily with all information being properly logged on. -Prepare Root cause analysis of all critical breakdowns. Required Candidate profile Should have worked on material handling/automation solutions- Conveyors, ASRS, AGV, AMRs Should have basic troubleshooting experience on PLC/HMI systems

Role & responsibilities 1. Building the SEW brand and value proposition in the market 2. Achieving sales targets to OEM/EU customers assigned 3. Ensuring service and application support to customers assigned 4. Collection of receivables and statutory forms 5. Identification and encashment of project business 6. Managing and developing relationships with customers 7. Forecasting and reporting of sales, trends and competitor activities 8. Submission of all travel and other claims in a timely manner 9. Responsible to maintain documents and records as per QMS procedure of the department Preferred candidate profile Should have Good communication, technical Skills & selling skills i.e. value selling, solution selling etc Should have handled 30+ customers both OE & end users with business volume of 50 lakh to 2 crs Candidate should have direct sales experience i.e. direct interaction with customers right from generating leads till payment collections. Handling sales thorough dealer/Sub dealer, Channel partners will not be suitable. Candidate experience in selling industrial automation product (motors, geared motors, gear boxes, VFD) is preferred, else other industrial/engineering product is also ok, but he/She should not be from DG/Transformers/Switch gears industry.

Senior Engineer - Automation Experience: 6 to 10 yrs Qualification: B.E (Electrical / Mechanical) Job Description: Should have knowledge in PLC programing, Servo drive, motor, VFD (variable frequency drive), Stepper motor, selection of sensors, load cells, measuring instruments, servo drive. Develop and maintenance of PC based machines and test equipment Machine cycle time reduction, production line automation, machine uptime improvements IF YOU ARE INTERESTED TO APPLY FOR THIS JOB SHARE YOUR RESUME TO careers@leadhr.net Contact No: 99406 32343

Job Title : Solution Sales Specialist/Application engineer/Product Marketing Specialist - Automation Experience : 7 to 10 Years Location : Chennai Qualification : B.Tech in Electrical, Electronics, or Instrumentation Engineering Job Summary: We are seeking an experienced Solution Sales Specialist to join our dynamic team. This role is pivotal in supporting regional sales teams by providing expert technical knowledge, designing tailored solutions, and engaging with clients to convey the value of our advanced automation and digital solutions. The ideal candidate will have in-depth experience with PLC , SCADA , Industry 4.0 , IIOT , and wireless technologies . Key Responsibilities: Collaborate with regional sales engineers during pre-sales activities to understand client requirements and design customized technical solutions. Develop and present solution architectures using PLC, SCADA, IIoT platforms, and wireless technologies tailored to customer needs. Assist in preparing technical proposals, BoMs, and system designs in alignment with customer RFQs and specifications. Conduct technical presentations, demonstrations, and workshops for customers. Work closely with product and engineering teams to ensure proposed solutions are feasible and deliverable. Stay updated on emerging trends in Industry 4.0 , smart manufacturing, and digital transformation to drive innovation in solution offerings. Support the sales cycle from lead qualification through solution delivery, ensuring alignment between customer requirements and company capabilities. Provide technical training and support to the sales team. Skills & Experience: 710 years of experience in Industrial automation solution building or sales. Strong knowledge and hands-on experience with PLC , SCADA systems , and IIOT frameworks . Familiarity with wireless communication technologies in industrial environments is an added advantage Understanding of Industry 4.0 concepts including cloud integration, edge computing, and data analytics. Basic to intermediate knowledge of programming (IEC 61131, Python, C/C++, or scripting languages) is a plus. Excellent communication and presentation skills with the ability to simplify complex technical topics for non-technical stakeholders. Educational Qualification : Bacheller degree in Electrical Engineering, Electronics, or Instrumentation or equivalent Preferred Attributes: Certification in industrial automation or IIOT technologies is a plus. Experience in customer-facing roles such as technical sales, application engineering, or consulting. Ability to travel within the assigned region for customer meetings and solution rollouts.

Hiring Electrical Maintenance @ Bahalgarh, Snp in Food Ind. Exp. - 2-5yrs sal- 20-25tk exp. in electrical maintenance with DG sets, air compress, electrical panels, AC systems, conveyors,FFS, and VFD drives (like Danfoss, ABB, etc.) cont.- 8222822052 Required Candidate profile ITI in Electrical Trade (from any institute). 2 to 5 years of experience in a similar role in an FMCG, food, or manufacturing environment Strong troubleshooting skills and ability to work independent