We are seeking a skilled and motivated HVAC Engineer to join our dynamic team. The ideal candidate will be responsible for designing, implementing, and maintaining heating, ventilation, and air conditioning systems in various residential and commercial projects. Key Responsibilities: - Design and layout HVAC systems in compliance with industry standards and regulations. - Conduct load calculations to determine HVAC system requirements for new projects. - Collaborate with architects and other engineers to develop efficient and cost-effective HVAC solutions. - Perform field inspections and assessments of existing HVAC systems to identify opportunities for improvement. - Prepare technical documentation, including specifications, reports, and cost estimates. - Oversee the installation and commissioning of HVAC systems to ensure all work is performed to specification. - Troubleshoot and resolve HVAC-related issues promptly to minimize downtime. - Stay current on industry trends, emerging technologies, and regulatory changes related to HVAC systems. - Provide technical support and training to junior engineers and other staff as needed. Qualifications: - Bachelor s degree in Mechanical Engineering or a related field. - Minimum of 3 years of experience in HVAC system design and implementation. - Proficiency in HVAC design software and tools, such as AutoCAD and Revit. - Strong knowledge of HVAC principles, codes, and standards. - Excellent analytical and problem-solving skills. - Strong communication and interpersonal abilities. - Professional Engineering (PE) license is a plus.

Responsible for over all management, coordination, ensuring compliance with the contract and liaison with senior management of Client. Lead the detailed design task team. Ensure all deliverables are prepared in accordance with quality and time constraints. As the representative of the Consultant, communicate with Employer and report to JV member firms. Review the previous and on-going related studies and data collected. Identify appropriate design codes and standards in collaboration with the Design Standards for Mumbai. Review of detailed Design for Civil/Architectural works. Recommend the Underground Safety system including ventilation system, firefighting system, and evacuation method. Review of Basic Design for underground facility including air conditioning system and tunnel ventilation system. Draft the Contract Agreements for signing. Study and propose optimized solutions for O&M. Develop planning and strategy for O&M. Estimate O&M cost. Review and approve the documents submitted by the Contractors related to O&M. Coordination between various Contractors and statutory agencies for O&M related activities. Ensure implementation of strategy for O&M during DLP Coordinate all elements of the construction activities. Make suitable arrangement for monitoring the performance of the Contractors and their sub-contractors. Monitor the Contractor s compliance with regard to the insurance, bond obligation as well as the labor and tax law Coordinate with all the parties in assisting client in the preparation of public relations information. Review of Design and plan the traffic management plan during construction. Assist client to organize Traffic Management. Supervise the identification of under ground utility facilities and buried materials (e.g. existing foundations). Assist client for supervision of utility relocation until the completion of consulting service. Review the relevant social requirements applied to similar Tunnel Projects. Analyze the risks and vulnerabilities for social issue in construction. Develop the tender documents in preparing social requirements

Position Overview: The Safety Officer for the tobacco industry is responsible for ensuring a safe working environment for all employees in tobacco production, processing, storage, and distribution. The role includes developing, implementing, and monitoring safety programs and practices to reduce hazards, comply with legal regulations, and ensure the overall health and safety of the workforce. Key Responsibilities: Safety Program Development & Implementation: Develop, implement, and update safety protocols, policies, and procedures for various operational areas. Conduct risk assessments and identify areas for improvement in safety measures. Design and enforce safety guidelines that comply with national and international safety standards and regulations. Training & Education: Conduct regular safety training sessions for employees across all levels (e.g., handling hazardous materials, using personal protective equipment, emergency evacuation). Ensure workers are well-informed about potential hazards associated with tobacco production and handling. Compliance & Regulatory Adherence: Ensure that the company complies with local, state, and federal workplace safety laws, such as OSHA standards and tobacco-specific safety regulations. Maintain records of safety inspections, incidents, and training sessions. Incident Investigation & Reporting: Investigate workplace accidents, injuries, and near-miss incidents to determine root causes. Prepare detailed incident reports and recommend corrective actions. Collaborate with management to implement improvements to prevent future accidents Safety Audits & Inspections: Conduct regular safety audits and inspections of machinery, work environments, and processes to identify hazards. Ensure fire prevention measures, machine guarding, ventilation, and other safety equipment are properly maintained and functioning. Emergency Response Planning: Develop and maintain emergency response plans for fire, chemical spills, medical emergencies, and other hazardous situations. Lead emergency drills and evaluate the effectiveness of emergency procedures. Health and Wellness Programs: Promote the health and wellness of employees by establishing safe work practices related to tobacco handling and manufacturing. Coordinate the provision of first aid and CPR training for designated employees. Safety Reporting & Documentation: Maintain up-to-date safety records, incident logs, training documentation, and safety meeting minutes. Prepare safety reports and communicate findings to upper management for continuous improvement. Collaboration with Departments: Work closely with production, maintenance, and other departments to ensure safety procedures are integrated into daily operations. Provide guidance and support to supervisors and workers to ensure proper safety practices are followed. Qualifications: Bachelors degree in Electric Engineering. Minimum 4-6 years of experience.

Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Designs and optimizes plumbing, heating, and ventilation systems for various types of buildings and structures. Conducts energy efficiency analyses and proposes improvements to existing PHE systems. Collaborates with architects, structural engineers, and other professionals to ensure integrated design solutions. Develops and maintains project schedules, ensuring timely completion of PHE design deliverables. Mentors junior engineers and provides technical guidance on complex PHE design issues. Participates in client meetings to present design concepts and address technical queries. Ensures compliance with relevant building codes, standards, and regulations in PHE system designs. Performs quality control checks on PHE designs and documentation before final submission. Contributes to the development of in-house design standards and best practices for PHE systems. Qualifications Minimum Requirements Bachelor's degree in Mechanical Engineering, Civil Engineering, or related field 7+ years of experience in PHE design for commercial and industrial projects LEED AP certification Experience with Building Information Modeling (BIM) and Revit Knowledge of fire protection systems, including hydrant systems, sprinkler systems, fire zoning, fire extinguishers, and clean agent systems Familiarity with energy modeling and analysis software Experience with Navisworks for clash detection and coordination Strong project management skills and experience leading design teams Excellent communication skills, both written and verbal Experience in client-facing roles and ability to present technical information to non-technical audiences

Greetings from Sarvodaya Hospital, Greater Noida West Looking for Associate Consultant - Critical Care Qualification: MD (Anaesthesia) & IDCCM, DM/ DrNB ( Critical Care ) Experience : Post PG -5 to 6 Years & Post DM/ DrNB - 0 to 1 years Interested candidates can share their CV on WhatsApp 7200175988 ( Deepika Bhainsora)

Greetings from Sarvodaya Hospital, Greater Noida West Looking for Consultant - Critical Care Qualification: MD (Anesthesia) & IDCCM, DM/ DrNB ( Critical Care ) Experience : Post PG - 10 to 20 Years & Post DM/ DrNB - Min. 3 years Interested candidates can share their CV on WhatsApp 7200175988 ( Deepika Bhainsora)

Role & responsibilities Consultant's main responsibility is taking care of Critical care patients. Take daily IPD rounds Handling and prepare roster of Critical Care RMO's Taking training of Critical Care Staffs Preferred candidate profile MD in Anesthesia/ Pulmo DM/DrNB in critical Care or IDCCM Experienced candidate will be given added preference Perks and benefits Salary as per market standard Yearly paid leaves Full furnished accommodation

We deliver the world s most complex projects. Work as part of a collaborative and inclusive team. Enjoy a varied challenging role. Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia. Right now, we re bridging two worlds as we accelerate to more sustainable energy sources, while helping our customers provide the energy, chemicals and resources that society needs now. We partner with our customers to deliver projects and create value over the life of their portfolio of assets. We solve complex problems by finding integrated data-centric solutions from the first stages of consulting and engineering to installation and commissioning, to the last stages of decommissioning and remediation. Join us and help drive innovation and sustainability in our projects. The Role As a Mechanical Engineer with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience, etc. Expertise in Heat load estimation using Carrier Excel and Carrier HAP. Carry out work according to relevant codes and standards. Expertise in selection of required HVAC systems and various applications Chiller based system, DX Condensing unit System, Package/Split AC, pressurization, ventilation fans, etc. Preparation of single line design markup and drawings like P IDs, DID s, general layout, duct layout, and piping layout. Preparation of HVAC Design Basis and Job Specification. Preparation/review of HVAC Material Requisition, Bill of Quantity (BOQ) and Scope Matrix Vendors offer evaluation and technical bid evaluation (TBE) and VDR. Participation in review meetings and 3D model review, monitoring of Progress/schedule, and Man-hours. Inter discipline coordination with civil, architectural, electrical, instrumentation, process, piping safety teams for HVAC room sizing, ducting layouts, utility requirements, etc. About You To be considered for this role it is envisaged you will possess the following attributes: Degree in Mechanical engineering (B.E. or B. Tech). 10 years + plus design experience in detail engineering consultancy is preferred. However, similar working experience in design side of OEM or mechanical / technical services department of a Refinery / Petrochemical / Fertiliser / Chemical plant may also be considered. However, last 5 to 8 years experience must be in detail engineering consultancy. Moving forward together We re building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And were not just talking about it; were doing it. Were reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in todays low carbon energy infrastructure and technology. Whatever your ambition, there s a path for you here. And there s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Worley takes personal data protection seriously and respects EU and local data protection laws. You can read our full Recruitment Privacy Notice Here. Please note: If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Worley. Requisition ID: NAV02JT Organization: Asia China

Roles and Responsibilities Communicating with vendors on all supplies and order delivery. Maintaining and repairing buildings and equipment Overseeing custodial and security staff Ensuring that the lighting, heating, air conditioning and ventilation systems are operating Supervising the design and upkeep of the facilities grounds and landscaping Monitoring space allocations and providing efficient space use. Adhering to and improving health and safety standards, and providing a workplace setting that is conducive to productive work. Planning for and overseeing major renovations and new construction. Monitoring construction and renovation projects. Ensure office supplier and vendor co-ordination. Support on asset management and new employee joiner formalities. Transportation Management. Monitoring CCTV Requirements Qualficiation: Any degree Good communication Vendor Negotiation Benefits Perks and Benefits: Performance based variable pay Employee friendly environment Monthly employee engagement Annual vacation

Replica BIM solutions is looking for MEP BIM Modeler to join our dynamic team and embark on a rewarding career journey Modeling MEP Systems: Create accurate 3D models of mechanical, electrical, and plumbing systems based on engineering drawings, specifications, and design requirements. This includes HVAC (Heating, Ventilation, and Air Conditioning) systems, electrical wiring, plumbing layouts, fire protection systems, and other MEP components. Coordination and Clash Detection: Collaborate with architects, structural engineers, and other stakeholders to ensure that MEP systems are properly integrated and coordinated within the building design. Use clash detection tools to identify and resolve conflicts or collisions between different building systems to prevent construction errors and rework. System Design and Layout: Assist in the design and layout of MEP systems, including sizing ductwork, piping, conduits, and equipment to meet building codes, standards, and project requirements. Ensure that MEP designs adhere to industry best practices for efficiency, safety, and sustainability. Detailing and Documentation: Develop detailed drawings, schematics, and documentation for MEP systems, including plans, elevations, sections, and schedules. Provide accurate dimensions, annotations, and specifications to communicate design intent and facilitate construction and installation processes. Quantification and Estimation: Generate material takeoffs and quantity surveys from MEP models to estimate project costs, quantities of materials, and labor requirements. Assist in budgeting, bidding, and procurement processes by providing accurate data and quantities for MEP components. Code Compliance and Standards: Ensure that MEP designs comply with local building codes, regulations, and industry standards governing MEP systems, including NFPA (National Fire Protection Association), ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers), and NEC (National Electrical Code) standards. Software Proficiency: Proficient in BIM software such as Revit, AutoCAD MEP, Navisworks, and MEP-specific plugins and tools. Stay updated on the latest software features, enhancements, and workflows to improve productivity and efficiency in MEP modeling and coordination tasks.

The role primarily involves managing the operation and automation of centralized HVAC systems, ensuring seamless design, installation, commissioning, and maintenance. The incumbent will act as a liaison between technical teams and clients, while also contributing to system optimization and programming Role & responsibilities 1. Domain Expertise: • Specialize in the operation and automation of centralized HVAC systems, ensuring efficient and reliable performance. 2. Planning and Design Review: • Review design documents for compliance with relevant standards and specifications. • Develop commissioning plans based on the I/O summary and technical requirements. 3. Installation and Verification: • Oversee and verify that system installations align with approved designs. • Conduct system testing and facilitate acceptance procedures. 4. DDC Programming: • Develop and troubleshoot Direct Digital Control (DDC) programs for optimal system performance. 5. Client Management: • Serve as the primary point of contact for clients, addressing concerns and ensuring satisfaction throughout the project lifecycle. 6. Ongoing Maintenance: • Develop and implement maintenance schedules to ensure long-term system reliability and efficiency. • Monitor and resolve technical issues in real-time to minimize downtime. Preferred candidate profile Qualifications • Bachelors degree in mechanical engineering, Electrical Engineering, or a related field • Additional certifications in HVAC Design, Building Automation Systems (BAS), or DDC Programming are preferred • 6 to 8 years of experience in HVAC systems, building automation, or related fields Skills - • DDC Programming & BMS Expertise • HVAC Installation, Testing, & Commissioning • Design Document Review & Compliance • Client & Project Management • Troubleshooting & Maintenance Perks and benefits Upto 8 LPA(Incl Variable)

Purpose/Objective The incumbent is Adani Airports’ Mechanical engineer with hands-on expertise and deliver design from concept to GFC. Key Responsibilities of Role Key Accountabilities Systems & Processes Support Lead Engineer - To implement processes in alignment to Engineering organization's strategic goals - To implement process measurement systems that align with organizational goals - To educate and organize managers so that they will manage processes effectively Governance & Assurance - Support Lead Engineer to govern & ensure Adani Promoters' requirements, Regulator's requirements, Concession Agreement / OMDA Agreement requirements, Finishes Quality requirements etc. Design Standardization - To support Lead Engineering to benchmark best industry practices and standardize design elements across Adani Airports to strengthen brand identity Operations - Lead the asset Engineering managers across Adani Airports in generating design delivery strategies, and system improvements. Assess and mitigate strengths and weaknesses of teams within the design organization - Create systems and implement review mechanisms for progressive inputs on Engineering - Governing the implementation of SOPs (Standard Operating Procedures) including defining TATs (Turn Around Time) for all activities to ensure consistency, seamless integration, timely deliveries, and standardization of activities - Develop close interaction with internal stakeholders to enable interdepartmental goals, objectives, and timely deliverables - Develop Look-ahead scenarios to ensure timely course corrections critical for operation of Engineering organization - Responsible to ensure timely and accurate deliveries by the Engineering organization, taking cognizance of other internal customer and stakeholder requirements - Conduct regular mission-meetings to ensure work is in progress as scheduled, ascertain future slippages and initiate corrective actions in advance and monitor the same for implementation - Track project progress in Engineering Review meetings by Asset design managers periodically - Generate reports and give presentations across departments and to management as applicable - Report all activities to the reporting manager to ensure transparency in working Technical Competencies Experience of HVAC design review & coordination of Utilities buildings,Experience in Mechanical design, review and coordination for MEP Systems,Hands on Experience of working on design software’s like AutoCAD, Revit ,Hands on experience of designing HVAC Systems and Chiller Plants Qualifications and Experience Functional Competencies - Overall years of experience shall be minimum 15 years; minimum 4 recent years in Airports & rest in large scale infrastructure projects - Experience in Mechanical design, review and coordination including HVAC systems of large-scale projects including chiller plants - Should have experience in Airport terminal buildings and Ancillary buildings - Should have exposure to HVAC design review & coordination of Utilities buildings - Innovative thinking & practice featuring sustainability & technology advancements in modern aviation is preferred - Capable of managing the Project under the guidance of lead engineering - Experience in handling the external / Internal stakeholders - Adaptation to Adani’s growing Airport’s business portfolio & its dynamics - Strong leadership, communication, and stakeholder relationship management skills - Conversant with applicable local and international statutory norms, regulations, etc. Like IATA, ICAO & DGCA Regulations - Should be familiar with application of design software’s like AutoCAD, Revit etc.

As a Hospital Support Executive (HSE), you will play a pivotal role in ensuring the successful implementation and long-term adoption of Lifesigns intelligent monitoring solutions within partner hospitals. You will build strong relationships with hospital staff, drive seamless integration of our technology, and optimize usage to improve patient care outcomes. Your ability to train, monitor, and support medical teams will be critical in enabling hospitals to harness the full potential of our solutions. Key Responsibilities Build Positive Relationships: Foster a strong working relationship with doctors, nurses, and technicians within assigned hospitals. Understand hospital culture and adapt to ensure seamless integration of Lifesigns solutions. Training & Adoption of Lifesigns Solutions: Train hospital staff, including doctors and nurses, on the deployment and proper usage of Lifesigns devices and monitoring dashboards. Ensure staff understand the benefits of our solution in reducing manual work and improving patient care. Provide hand-holding support during the initial phase of deployment to ensure staff confidence and proper usage. Handle Objections: Address objections from hospital staff related to the use of new technology, including concerns around job security, lack of awareness, and past negative experiences. Present clear benefits and solutions to overcome resistance and foster a positive environment for adoption. Deployment & Monitoring: Oversee the deployment of Lifesigns devices, ensuring that the iMS-to-wired-beds ratio remains healthy and balanced. Regularly monitor daily patient admissions and follow up to ensure our solution is effectively utilized across all necessary beds. Escalation Management & Communication: Monitor patient vitals and promptly communicate critical alerts to the hospital medical team, ensuring timely intervention. Document these early warnings and communicate them to the relevant Account Manager for appropriate action. Ensure that escalations from hospitals are kept to a minimum by addressing issues promptly. Documentation & Reporting: Accurately maintain daily logs of deployment, patient alerts, and interactions with hospital staff. Document time savings for nurses after the implementation of the Lifesigns solution, highlighting improvements in workflow efficiency. Follow up on purchase orders and ensure timely payments from hospitals. Key Performance Indicators (KPIs) Training Completion Rate Percentage of hospital staff successfully trained. Adoption Rate The ratio of iMS vs. networked beds. Objection Resolution Reduction in staff objections over time. Escalation Response Timely handling and resolution of escalations and alerts. Documentation Accuracy Completeness and accuracy of all reports and logs. Payment Compliance Timely follow-up and receipt of payments from hospitals. Typical Daily Routine - Hospital Service Executive (HSE) Morning Checks: Review all alerts from the previous day to ensure appropriate follow-up actions were taken. Identify newly occupied beds and evaluate potential opportunities for deploying Lifesigns' solution. Deployment Opportunities: Assess areas where our solution can be implemented, considering newly occupied beds or previously unmonitored patients. Engage with hospital authorities to gain approval for deploying the solution in new areas or beds. Coordination with Sales Team: If encountering difficulties in obtaining approvals or facing challenges in deployment, collaborate with the designated salesperson for that hospital. Post-Deployment Monitoring: After deployment, monitor the dashboard of the patients actively and ensure nurses are consistently checking the dashboard for patient status updates. Encourage staff nurses to rely on the dashboard for real-time monitoring and reduce manual tracking efforts. Vital Monitoring & Escalation: Regularly check vital parameter readings, such as ECG patterns, to detect any abnormal variations. In case of a detected variation, promptly contact the Central Monitoring Team (CMT) to review the case before alerting hospital staff. Log the pre-diagnostic report and relevant case notes in the system to ensure proper documentation. Handling Critical Alerts: If an alert is deemed critical, immediately inform the nurse in charge and follow up to ensure prompt action is taken. Data Collection & Early Warning Reports: Gather comprehensive data on variations and patient vitals, entering this information into the early warnings report for reference. Provide a discharge report for patients being discharged, ensuring this information reaches the nursing staff and doctors to streamline their workflow. Engagement with Key Hospital Personnel: Meet regularly with key hospital stakeholders to present findings from early warnings and highlight any important patient data or trends. End-of-Day Reporting: Before 8 PM, complete and submit the daily report sheet, ensuring all activities, deployments, alerts, and communications are accurately documented. Qualifications Required: Bachelor's degree in healthcare, biomedical engineering, nursing, or a related field. Proven experience in healthcare support roles, preferably in a hospital or clinical setting. Strong understanding of healthcare technology solutions and patient monitoring systems. Excellent communication, interpersonal, and organizational skills. Ability to work independently and as part of a team. Proficiency in using healthcare software and technology platforms. What We Offer Competitive salary and performance-based incentives. Opportunities for professional growth and career advancement. Comprehensive training programs and continuous learning opportunities. A supportive and collaborative work environment. The chance to make a significant impact on healthcare delivery in India

As a Digital Patient Monitoring Specialist, you will play a critical role in overseeing real-time patient vital signs and ECG data through the Lifesigns platform. Operating 24/7, you will focus on early detection of threshold breaches, ensuring timely alerts to hospital teams, and facilitating rapid interventions. This role requires close collaboration with hospital support teams, accurate documentation of critical events, and continuous process optimization to enhance patient safety and clinical efficiency. Key Responsibilities Continuous Monitoring Oversee the real-time monitoring dashboard 24/7, ensuring constant vigilance on patient vital signs and ECG data. Regularly review and analyze patient data to detect trends or abnormalities. Implement best practices for improving monitoring accuracy and response efficiency. Alert Management Investigate and validate alerts to minimize false positives and ensure precision. Prioritize and escalate alerts based on severity, following established protocols. Immediately notify hospital teams of critical events, providing precise details for timely intervention. Record Maintenance Maintain secure and organized records of patient alerts, actions taken, and intervention outcomes. Document critical alerts with timestamps and details of medical response. Generate periodic reports highlighting key incidents, trends, and recommendations for quality improvement. Follow-Up and Patient Condition Assessment Actively follow up on triggered alerts, collaborating with medical teams to assess patient conditions. Establish clear communication channels for discussing findings and coordinating interventions. Implement post-alert evaluation strategies to enhance monitoring effectiveness. Collaboration with Hospital Support Teams Work closely with hospital support executives to streamline patient data collection. Facilitate regular meetings to ensure seamless coordination between monitoring teams and hospital staff. Contribute to process improvements that enhance workflow efficiency. Direct Communication in Emergencies Maintain direct communication channels with hospital teams for immediate emergency response. Develop and practice emergency response protocols to reduce reaction time. Ensure seamless information exchange to optimize patient care during critical situations. Training and Support Provide training to hospital staff on effectively utilizing Lifesigns monitoring platform. Offer continuous support to healthcare teams on interpreting monitoring data. Develop training programs for hospital support executives, enhancing their ability to escalate issues efficiently. Qualifications BSc in Paramedical Sciences, specializing in ECG Technician, Cardiac Technician, or OT Technician. CCT Certification. Strong understanding of real-time patient monitoring systems and alert management. Excellent analytical skills and attention to detail in data interpretation. Strong communication and coordination abilities for working with hospital teams. Ability to work in a high-pressure, fast-paced clinical environment. Key Skills Real-time patient monitoring expertise Alert validation and escalation management Strong analytical and problem-solving abilities Effective communication and coordination Training and process optimization skills What We Offer Competitive salary and performance-based incentives. Opportunities for professional growth and career advancement. Comprehensive training programs and continuous learning opportunities. A supportive and collaborative work environment. The chance to make a significant impact on healthcare delivery in India.

It takes the brightest minds to be a technology leader. It takes imagination to create green energy for the generations to come. At Siemens Gamesa we make real what matters, join our global team. Siemens Gamesa is part of Siemens Energy, a global leader in energy technology with a rich legacy of innovation spanning over 150 years. Together, we are committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. As a leading player in the wind industry and manufacturer of wind turbines, we are passionate about driving the energy transition and providing innovative solutions that meet the growing energy demand of the global community. At Siemens Gamesa, we are constantly seeking talented individuals to join our team and support our focus on energy transformation. Find out how you can make a difference at Siemens Gamesa: Working with us . How to contribute to our vision For our Plant and Facility Design (PFD) team, we are looking for a committed and motivated Solution Designer to ensure we can execute our growing project pipeline. The factory layout is changing due to different blade types, new equipment, plant extension or a new plant. The project will present the preliminary layout, and the layout will be verified by a Tecnomatix simulation (your task) including blade movement, equipment, lifting clearance, material flow and people movement. Optimize the layout for better blade output, time saving, material flow, people travel, forklift travel or for when the plants or project need to save time, cost, or space. The rest of the PFD team delivers the specification of building requirements and building specific equipment from feasibility study, following the process with Siemens Gamesa s Real Estate, the design institute, and the general contractor, until the new building or extension of the building is finished. The building specification includes building specific equipment, layout, cranes, floor and ceiling loads, paint booth, curing oven, electrical power calculation, high vacuum, ventilation, degasser/ infusion system, compressed air, humidification, etc. Collaboration with our key stakeholders and understanding the processes, technical requirements, and deadlines are essential. Integrate Tecnomatix knowledge and experience in the plants and projects. Revise and follow up on layouts 2D and/or 3D. What You Need To Make a Difference A passion for renewable energy and a sense for the importance to lead the change. We are also looking for Besides a passion for renewable energy and a sense for the importance to lead the change, we are looking for a motivating team player, who is resilient, responsible, and structured with excellent communication skills. You interact with stakeholders high and low in the organization as well as external stakeholders. You are motivated by providing quality results within the deadlines and are happy to work in a dynamic organization and environment. Preferably you should have: Experience in Tecnomatix. Experience in NX, Autodesk 2D, or other drawing programs. Experience with Microsoft Office applications like Excel, Power Point and MS Project. As a person, we are looking for someone who is: Comfortable working in an international, multi-cultural team, and capable of working effectively across department boundaries in a large organization. Open-minded and proactive with a quality-oriented and structured approach. In possession of excellent stakeholder and communication skills in English, both written and verbally. Willing to travel approx. 10-30 days per year. Educational qualification required - BE, B.Tech, MCA Total work experience required - 2 to 5 Years In return of your commitment we offer you Become a part of our mission for sustainability: Clean energy for generations to come A global team of diverse colleagues who share passion for renewable energy Trust and empowerment to make your own ideas reality Personal and professional development to grow internally within our organisation Competitive Pension Scheme Become a part of our mission for sustainability: Clean energy for generations to come. We are a global team of diverse colleagues who share a passion for renewable energy and have a culture of trust and empowerment to make our own ideas a reality. We focus on personal and professional development to grow internally within our organisation. Siemens Gamesa offers a wide variety of benefits such as flexible working hours as well as home-office possibility for many colleagues, employer-funded pension, attractive remuneration package (fixed/variable) and local benefits such as subsided lunch, employee discounts and much more Empowering our people https: / / www.siemensgamesa.com / sustainability / employees How do you imagine the future https://youtu.be/12Sm678tjuY Our global team is on the front line of tackling the climate crisis, reducing carbon emissions - the greatest challenge we face. We believe diversity creates more opportunity for success. That s why we recruit great minds from all walks of life: it doesn t matter the gender, age, ethnic background, sexual orientation or disability. Our main aim is to find people from around the globe who can contribute to world-changing technology. .

Provide comprehensive nursing care to critically ill patients, including assessment, medication administration, monitoring, and documentation. Collaborate with physicians and other healthcare professionals to develop and implement individualized care plans. Perform complex clinical procedures, such as mechanical ventilation, hemodynamic monitoring, and continuous renal replacement therapy. Respond quickly and effectively to changes in patient condition, communicating with the healthcare team as needed. Ensure patient and family members are informed about their care, treatment options, and progress. Educate patients and families about disease prevention and management, including lifestyle modifications and medication management. Adhere to all relevant standards, regulations, and policies, including infection control protocols and patient confidentiality. Participate in ongoing professional development and training, maintaining current knowledge and skills.

Responsibilities: HVAC system design, heat load calculations, piping & instrumentation diagrams & tender preparation, Pipe Sizing. Exp into Industrial & Cleanroom Projects is must Share resumes to rashmi.matkar@peoplesense.in or call on 8928935769

RED.HEALTH is a leading emergency response company that operates across India. We provide a range of healthcare solutions to make emergency care accessible for everyone. Our journey started in 2016 as Stanplus, a comprehensive emergency response company based out of Hyderabad and now servicing 15+ Cities in India. The company's commitment to quality care and accessibility is reflected in its core values: Empathy, Speed, and Reliability. Our vision is to be the go-to resource for emergency care in India, and we are already making a significant impact in the industry. We are committed to using innovative approaches and cutting-edge technology to provide the best possible care to our patients. The dedication, hard work, and passion for saving lives are what make us the company it is today. Job Description: Emergency Medical Technician Designation: Trainee EMT Shift: 12hours Rotational shift Location: PAN Indi. Position Overview: We are seeking a highly skilled and compassionate Advanced Emergency Medical Technician (AEMT) to join our team. As an AEMT, you will provide advanced pre-hospital care in emergency situations, bridging the gap between basic EMTs and paramedics. Assessing patient conditions, administering advanced treatments, and ensuring safe transport to medical facilities. Your expertise and quick decision-making will play a vital role in saving lives and delivering high-quality patient care. Key Responsibilities: Respond swiftly to emergency calls and assess patients' medical conditions. Provide advanced life support (ALS), including IV therapy, advanced airway management, and medication administration within the scope of practice. Monitor and manage patients with complex medical or trauma conditions. Communicate effectively with patients, families, and other emergency responders to ensure coordinated care. Safely transport patients to healthcare facilities while monitoring and maintaining their stability. Document all patient care, treatments, and observations accurately in compliance with protocols and legal requirements. Maintain, inspect, and restock medical equipment and supplies, ensuring readiness for emergencies. Operate emergency vehicles safely and in accordance with state and local regulations (if required). Collaborate with paramedics, EMTs, firefighters, police, and hospital personnel to deliver seamless care. Qualifications: High school diploma or equivalent; additional medical or technical training is a plus. Current Advanced EMT certification (state and/or national). Current certifications in Basic Life Support (BLS) and Advanced Cardiovascular Life Support (ACLS). Knowledge of advanced pre-hospital care protocols, medical terminology, and emergency procedures. Strong interpersonal and communication skills, with the ability to provide compassionate care in stressful situations. Physical stamina to perform tasks such as lifting/carrying patients or equipment. Ability to operate emergency vehicles safely (if required). Strong critical-thinking and decision-making skills in high-pressure environments. Preferred Skills and Attributes: Experience in pre-hospital emergency care or a related medical field. Familiarity with local geography and efficient navigation skills. Commitment to ongoing education and professional development. Opportunities for professional growth and leadership roles. How to Apply: Interested candidates are encouraged to submit their resume, certifications, and a cover letter to [Keerthi.priya@red.health]. We are an equal-opportunity employer and welcome applicants from diverse backgrounds. Join our team and take your career in emergency medical services to the next level while making a meaningful difference in your community.

Cogito having a strong presence in USA and its delivery center in Delhi NCR, India, specializes in Human Empowered Automation. Our mission is to help our customers innovate and scale by solving their day-to-day data needs. Using our skilled on-demand workforce, we partner with Machine Learning, Artificial Intelligence, Technology and eCommerce clients to develop high-quality data sets used to build and enhance various cutting-edge business applications. Total Openings: 2 Mandatory Requirement: Repair and Installation/Uninstallation of Window AC's Designation: AC Technician Shift: Rotational Gender: Male CTC: 25 k Location: Sector 2, Noida Date of Joining: ASAP Direct Walk in Interview dates: 24th to 26th March'25 Interview Time: 9:00 am to 5:00 pm Interview Venue - Cogito A-83, Sector 2 Noida Contact HR Department Regards Team HR

As a HVAC engineer, you will ensure temperature and ventilation systems are working efficiently and safely. Designing & implementing HVAC systems that meet the needs of the building or homeowner Maintaining and repairing HVAC equipment and systems

Design Engineer is responsible for designing, developing, and overseeing heating, ventilation, and air conditioning (HVAC) systems to ensure energy efficiency, sustainability, and compliance with industry standards. Their primary roles and responsibilities include: Design of HVAC systems for Commercial, Industrial, Infrastructure buildings. Select appropriate HVAC equipment, including chillers, air handling units, pumps, and ductwork etc. . Develop ductwork and piping layouts using software like AutoCAD, Revit, or BIM. Knowledge on VRF system, Chillied water system, Variable pumping system, Car park ventilation system etc. Ensure compliance with ASHRAE, ISHRAE, NBC, SMACNA, NFPA, and other industry standards. Conduct heat load, cooling load, and ventilation and pressurisation calculations. Perform psychometric analysis to optimize air conditioning processes. Select and size HVAC equipment based on the calculations and project requirements. Design and sizing of ducting and piping Coordinate with vendors and manufacturers for technical support. Develop HVAC design drawings, specifications, Design basis report and B. o. Q. Collaborate with Architects, Structural engineers, and other MEP service teams Utilize software like AutoCAD, Revit MEP, HAP, Trace 700 for design and simulation.

! Hiring for an exciting opportunity !! Role - Territory Sales Executive Location - Hyderabad Responsibilities :- Visit establishments to evaluate needs or to promote product or service sales. Negotiate prices or terms of sales or service agreements. Prepare and submit sales contracts for orders. Maintain customer records, using automated systems. Answer customers' questions about products, prices, availability, or credit terms. Quote prices, credit terms, or other bid specifications. Contact new or existing customers to discuss how specific products or services can meet their needs. Emphasize product features based on analyses of customers' needs and on technical knowledge of product capabilities and limitations. Compute customer's installation or production costs and estimate savings from new services, products, or equipment. Select or assist customers in selecting products based on customer needs, product specifications, and applicable regulations Interested can Connect - Geeta.r@head2hire.com Thanks & Regards Geeta - 7290007915

Career Area: Engineering Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, youre joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We dont just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. About ECS: Caterpillar s Engine Components and Systems group, within LPSD, is focused on creating integrated engine systems to enable Caterpillar product to provide industry leading performance, value, and durability with a differentiated product that will make our customers successful. The ECS team is responsible for design and development of engine air and exhaust systems, turbocharger systems, small fluid lines, cooling systems, lubrication systems, crankcase ventilation systems, covers and guards. Job Summary: We are seeking a Design Engineer to join our team located at World Trade Center, Chennai. In this role, you will be responsible for the project leadership and delivery of the small lines design on the Medium Vee (C27, C32, 3400) and C7 to C18 Marine engine platforms. This will include selection, design, development and validation of the small lines including all tube hose assemblies, couplings, clamping, castings and light fabrication parts. You will have the opportunity to work with and learn from a highly experienced team of engineers having significant experience across Caterpillar engine systems. Job Duties/Responsibilities: Work with the engine platform teams to establish system requirements. Develop and implement small line design to support NPI NTI programs. Collaborate with other component engineering teams to provide a fully integrated lines group level design to meet program requirements. Resolve design and quality problems by applying sound engineering judgement, advanced analysis techniques, and testing. Develop capable suppliers that can meet stringent drawing and specification requirements, while providing a cost-effective product. Ensure a robust sourcing strategy to meet growing production demand. Travel upto 10% may be required. Work seamlessly with operations to ensure the product is produced as intended to meet customer expectations and the voice of the business. Lead other engineers within the Cat global ECS team for design and the release of prints for production. Reduce product cost through design refinement, supplier collaboration, and sourcing strategy. Identify and work with other Caterpillar SMEs to ensure a comprehensive design which meets mechanical, thermal, life and performance requirements. Stay up to date with the latest advances in tubing, hoses, couplings, casting, metal fabrication and related engine systems. Prepare and support execution of test plans to verify designs with simulation and to validate system designs in the lab and on prime product. Required Qualification: Degree Requirement: Bachelor s, Master s or Doctorate Degree in Mechanical, Aeronautical, Production Engineering, Automotive Engineering or equivalent with 6 to 12 years of experience in the field. Experience in design of engine components with special emphasis on hoses, tubes, castings, fluid systems, and structural integrity of mechanical systems. Validation testing definition experience using FMEA and DVPR methods Ability to work or lead multiple projects simultaneously and to make sound priority decisions Have prior experience working with suppliers and procurement team along with project planning experience Strong analytical skills with excellent communication, interpersonal and collaboration skills Desired Qualifications: Proficiency in CREO CAD Tool / Piping Design CAE CFD Basic Knowledge Experience with quality tools including APQP PPAP Relocation is available for this position. This Job Description is intended as a general guide to the job duties for this position and is intended for the purpose of establishing the specific salary grade. It is not designed to contain or be interpreted as an exhaustive summary of all responsibilities, duties and effort required of employees assigned to this job. At the discretion of management, this description may be changed at any time to address the evolving needs of the organization. It is expressly not intended to be a comprehensive list of essential job functions as that term is defined by the Americans with Disabilities Act. Relocation is available for this position. Posting Dates: March 20, 2025 - April 2, 2025 Caterpillar is an Equal Opportunity Employer (EEO). Not ready to applyJoin our Talent Community .

Managed execution of Electrical, Mechanical, Plumbing, HVAC, and Ventilation systems, coordinating with vendors. Prepared BOQ's, verified contractor bills, and handled testing, commissioning, and AS BUILT drawings for commercial/industrial projects.

Job Description - Senior HVAC Design Engineer Education:- B.Tech / B.E. in Mechanical Experience:- 7-15 years Approx. Software skills:- Revit MEP & AutoCAD is must, HAP/TRACE Role:-Permanent Job Description:- Industrial projects experience is must in buildings like Warehouses, admin building, medical center, electrical buildings, and any other support facilities buildings. Knowledge of International & local codes, ASHRAE, NFPA, AMCA, and NBC to incorporate in design work. Prepare and plan all deliverables needed in project for HVAC scope of work in the project. Ability to guide MEP draughtsman to generate required output and 3D models within project schedule To prepare Design basis report for HVAC scope of work in projects To read and follow in detail Client Technical specifications. Ability to Design any HVAC system and Finalization of design schemes HVAC system. Design all the HVAC thermal loads calculations. Calculation of ventilation requirements Read and Analyze AutoCAD / Revit architectural layouts. Design the Ducts systems and their required calculations. To prepare P&ID layouts To prepare concept drawings and detailed design drawings or get it prepared from designers To prepare BOQ and Technical Specifications. To prepare equipment data sheets. To check all drawings and other deliverables before sending it to client and to maintain high standards in quality output. Working knowledge of sustainable engineering practices shall be an added advantage Practical understanding of structures, specifications and details drawings for the buildings. Logical analysis of problems Fluent in English and good communication skills within cross culture teams is must. Team player, Practical and self motivated Able to accept responsibility and work independently without any supervision