1015 Valves Jobs - Page 35

Detail engineering of Post-order activities of Industrial Refrigeration Systems (Ammonia, propylene and/or freon refrigerants like R22/R404A/R449A/R507 for sub zero temperature / cooling applications, Ammonia BOG applications etc. , ) Review, coordinate with customer, and get approval for PID, 3D modeling, GA drawing, Layout during post order Submission of engineering documents to customer, check manufacturing drawings before release, equipment design verification, valve selection etc. for hazardous (Zone 1 / Zone 2 area, Gas Group IIA/IIB T3) safe area applications Design Pressure vessel, Heat Exchanger, piping design as per Code standards, customer RFQ/MR documents, get approval from customer on applicable drawings, release fabrication drawings and BOM for manufacturing Knowledge of HTRI for heat exchanger design is essential Base frame, support structure design etc and coordinate with vendors for outsourced detail engineering activities like Stress analysis, Structural analysis etc. , Datasheet preparation of mechanical bought-out items like valves, static equipments, insulation etc. , and release for procurement Support to estimation team during pre-sales like review of tender documents, equipment sizing etc. ,

The candidate Should have min 3 years of experience in Sales, will be promoting Valves and will have to Visit Retail Shops. For more details Interested candidates may contact 9152031092

The candidates should have experience in sales of industrial Valves/ Industrial Products and should have client base loke MEP Consultants, Building Consultants etc. Interested candidates may contact 9152031092

The candidate should have experience in Sales of industrial Valves/ industrial Products and should have client base of MEP Consultants, Building Consultants etc. Interested Candidates may contact 9152031092

The candidates should have experience sales of industrial Valve, Industrial products and should have clients like MEP clients, Building Consultant etc. Interested candidates may contact 9152031092

The candidates should have experience in sales and should have clients like MEP Consultants, Building consultants etc. interested candidates may contact 9152031092

Role & responsibilities Able to create and work in diverse team. Builds appropriate, constructive, and effective business relationships throughout the organization. Communicates (in English) clearly, accurately, and consistently both verbally and in written matters. Employs the principles of active listening and encourages feedback from others. Responsible for developing piping material classes, perform pipe wall thickness calculations. Prepare technical specifications for pipes and fittings. Conduct technical bid evaluation of pipes, fittings, and valves. Fully familiar and prepare Valve datasheet, specs for Gate, Globe, Check, Ball, Butterfly and Double Block and Bleed Preparation of manual valve data sheets and valve data base. Prepare material requisition and purchase requisition for valve packages. Conduct technical bid evaluation. Review vendor documents. Review general assembly drawings of valves in various services. Participate in fugitive emission testing of valves. Review vendor quotations and prepare technical bid evaluations for valves and fittings. Review valve general assembly drawings (GAD). Prepare piping material specifications and perform piping wall thickness calculations. Review pipes, fittings and valves vendor documents. Resolve site engineering requests. Perform quality inspection of valves and specialty items. Technical review of Material Record Book document for piping components and issue engineering clearance. Project Execution: Knows the discipline scope/cost/time requirements, assists the team to meet expectations, and coordinates with other disciplines to ensure project success. Supports management of project change and progressing for the discipline and works with the Project Management Team to take corrective actions regarding any issues, staffing requirements, scope changes, progressing, or other events that could affect project completion and/or profitability. Plans discipline quality, monitors quality activities, squad checking, drives and participates in squad checking, recommends improvements, and takes action where required. Provide technical support within the discipline team, liaise with the project team, and consult with relevant resources as required. Coordinate review and approval of design and interfaces on client requirements and specifications. Project Deliverable: Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc. Creates final documentation incorporating all relevant information and pursues customer approval. Perform discipline specific engineering services such as: Identify and report changes to project scope; Contribute to appropriate studies, analyses and recommend actions; Assist with the preparation of detailed designs and drawings, specifications, data, calculations and reports; Provide assistance during procurement, construction and commissioning activities. Gathers data from multiple sources and prepares engineering studies, analyses, calculations, etc. Tender Support: Support to the BD/Proposal department in preparing proposals. Developing and maintaining discipline estimating norms. Preferred candidate profile Bachelors in Chemical/Mechanical engineering, minimum 10 years experience, out of which 5 years should be with O&G engineering Consultants Responsible for piping material deliverables Should be readily available to travel to other Avenir offices for duration of 5 days to 6 months Have a good attitude

Role & responsibilities Customer relationship, BDE, identifying and networking with prospective clients, Generating business Deliver business plan with days sales outstanding, Could calling. Sales industrial product. Preferred candidate profile

Role & responsibilities Immediate hiring going on for HVAC Engineer in Ranchi. Looking out for a dynamic person with genuine personality, hard working, team player, with good amount of experience in HVAC technology and well versed in this field. Preferred candidate profile

* * * * Job Location - BANGALORE * * ** * RFQ Preparation : Issuance of inquiries to the suppliers and various parties including manufacturers. Coordinate with the suppliers for Technical Submittals, Non & Materials Requirements (NMR), Spare Parts Data Packages (SPDP). Review and extract information provided in the technical documents such as datasheets, drawings, manuals. Ensure that all potential suppliers are provided with identical information upon which the quotations are given equal opportunity to meet the desired requirements. Follow Up: Call manufacturers and get a price quote for the items in the RFQ. As the process involves communication in USA/Europe/Other countries using phone/fax/email, we need excellent English communication skill. Do NOT apply if your English skills are not excellent. Bid Preparation: Complete both technical & commercial evaluation all the offers from suppliers and prepare our bid to the end user. Negotiations : Capable of competitive price & delivery negotiation with vendors. Every RFQ/Order will have a deadline. So 100% of the work will be driven by deadlines and the employee must be prepared to work under pressure of daily deadlines. Office Time: 3pm - 12midnight Personal Time Off : PTO includes all vacation/leave/sick days . PTO must be approved atleast 2 weeks in advance. PTO is limited to 15 business days/year. Preferred candidate profile Mechanical/ Instrumentation Engineer with minimum 5 yrs experience in oil & gas industry (Refinery / Petro-chemicals only). Onsite Experience in erection & commissioning (Mechanical, Civil, Electrical and Instrumentation) for Process Plant and Pipeline projects * * ** * * Candidate must be willing to relocate to Bangalore. * * * * * * * * Skills required: Knowledge on pump, motors, valves, actuators, field instruments, HVAC systems. Relevant design codes such as API /ASME/BIS// HAZOP/Hazardous area classification/zone classification. Candidate having muti-discipline exposure will have added advantage. Good proficiency in English is necessary- both Oral & Written. MS-Word, Excel, Adobe Acrobat, Email, Internet basics. Experience working with clients in USA is a plus. Perks and benefits Performance based BONUS Work-From-Home - 12 days / yr with management approval Provident Fund Contribution by the company Company Events

Role & responsibilities Responsible for identifying new sales opportunities, setting appointments, and generating revenue, focusing on Automotive OEMs and Tier1 Automotive industries Execute divisional sales strategies for own territory and support increasing its profitability Expand and maintain constant customer interactions through Customer seminar, trainings, conferences, product demonstration etc. Maintain proactive relationship with customers with the help of Walk the Line to result in transformations Ability to demonstrate the product / features through demonstrations Responsible for timely order execution and customer satisfaction Customer relationship management and complaint handling in coordination with service team Develop and manage a robust distribution channel

Our solutions are a key part of most industries - electronics, medical research, renewable energy, food production, infrastructure and many more. Working with us means working with the latest technologies and groundbreaking, sustainable innovations. Join us on our journey for a better tomorrow. Your Role Job description/Mission As the business is continuously increasing for GAP equipment, products, and projects all over the globe. The need arises to look for reduction in standard project delivery time to increase the profitability. Most of the time machines are exported all over globe. To achieve this, we are looking for person with strong Technical Knowledge preferably of GAP product/ Centrifugal Compressor, experience of handling the Package engineering independently or sometimes with support of team for multipleprojects as assigned. The selected candidate will need to work closely with product companies in US and Germany and with the project teams there. This position will report to Head -Projects in one of the projects teams. He / She will be responsible for the package engineering within the agreed scope of supply, timely deliveries, within the agreed price from the point of view of customer. From the company point of view, He / She will be responsible for executing the project aiming for First Time Right Concept, Controlling the costs, maintaining, or improving the margins and maintaining the databank for the executed jobs for the future reference. Following Mission, Vision and Business Code of Practice in letter and spirit Job description His/her main responsibilities will be: Preparing / Reviewing General Arrangement Drawings, Foundation Plan, Various P&IDs, 3D-modelling of engineered turbo compressors independently Preparing / Reviewing base frame design, integral / standalone oil systems, oil piping, air piping, CW piping, seal piping etc Releasing the RFQ for the bought-out items in project such as Main Motor, Steam Turbine, Intermediate Gear Box, Lube Oil system, Seal Gas System, Anti surge Valves, Loose accessories, individual components of oil system / seal system incase of integrated to compressor package etc. Technically evaluating Vendor offers for acceptance as per project / Atlas Copco standard. Standardized BOM for various models of compressors as stated above. Standardized accessories and ship loose items Package engineering standardization in terms of skid layout for various models of compressor packages. This includes Mechanical, Electrical and C&I items, sub-assemblies, panels, Lube oil piping, CW piping, seal gas piping, cable routing etc Database creation and maintenance. Interaction with ACC (USA) and ACE (Germany) product companies to achieve the objective related to standardization and database. Project piping layout, support structures Knowledge of Stress analysis for the base frames, process piping Interpret API, ASME, IS standards etc related to project engineering. Responsible for the project engineering; by understanding the various specifications and thus completion within the stipulated period. Interpreting technical aspects of the quality assurance plan and inspection & test plan To meet organizational goals towards delivery efficiency, quality, and cost Follow SAP and PLM system. Spontaneous support to packaging and aftermarket functions Good rapport & liasoning with quality, sourcing, and packaging functions Support to Application, Sales & marketing in terms of giving feedback. To succeed, you will need Experience requirements 2 to 6 Yrs of experience in engineered products engineering/ /manufacturing/packaging. Higher Experience Candidates will be offered suitable designation. Experience in SAP + PLM system preferred Product and packaging knowledge, skills in GAP products/ Centrifugal compressor would be preferred. Experience of having worked on GAP machines will be a definite advantage. Willingness to travel to customer & other stake holders as and when required on regular basis Knowledge/Educational requirements Familiar with SAP, PLM, MS Office software, including Excel, Word, PowerPoint. You should have a bachelor s degree from a recognized University in relevant discipline Preferably in Mechanical Engineering. Proficiency in CAD software s like Solid works, Auto-CAD, PDMS, PDS Proficiency in PLM software, SAP. Personality requirements Self-motivated, highly organized, capable of working independently. Excellent result-oriented, strong but flexible personality, ability to create and maintain a good communication in all levels. You will have a key role in the Product Company management team, and you will therefore characterize yourself as a real team-player. Result oriented; People oriented. Able to prioritize and adapt quickly to an ever-changing environment. In return, we offer you Interesting and challenging work enviroment Enthusiastic and friendly team members Dynamic and multinational environment Teambuilding activites Opportunities to use other foreign languages. Motivating remuneration Great opportunities for professional growth City Pune Diverse by nature and inclusive by choice Bright ideas come from all of us. The more unique perspectives we embrace, the more innovative we are. Together we build a culture where difference is valued and we share a deep sense of purpose and belonging.

Co-ordinate and inspect contract work on the fabrication, civil, plumbing, mechanical and other related systems. Documentation such as filling in of preventive maintenance program checklist, equipment history card etc. Adherence to Safety - Ensure all the safety rules as per OHSAS & EMS are followed for Man, Machine and Material. To ensure that preventive maintenance is performed as per schedule. To monitor and control the critical spares stock to reduce machine breakdown. Implementation of requirement as per QMS and RC standard. Monitor operation and maintenance of centrifugal & reciprocating pumps, agitators, reciprocating and centrifugal air compressors, glass lined equipment s, pumps and agitator mechanical seals, seal less pumps, agitated Nutsche filters, rotary vacuum paddle dryers etc. Monitor and perform maintenance of process equipment s such as valves, flame arresters, valves, emergency vents, dust collectors, star valves, packaging machine etc. Attend training as per identified training needs. Supervise and act as mentor for technical trainees, apprentice, helpers for their learning in your area. Supervise the work activities of all subordinates. Provide training to workers, trainees, apprentice, helpers, and housekeeping staff.

Skills: Minimum of 8-10 years of exp in embedded and Controls Engineering or similar role Familiarity with computer languages, C/C++, Experience working on embedded software development and embedded software architectures Design and implement firmware for embedded devices and systems from requirements to production and commercial deployment - Design, develop, code, test and debug system software - Protocol hands-on knowledge - UART/I2C/SPI/CAN - Hands-on experience in setting up and using JTAG/SWD for Debugging/troubleshooting - Working with Linux (preferred) - Hand-on knowledge of working with Arm and non-Arm microcontrollers - Hand-on knowledge of working with Sensors and actuators - Knowledge of Motor control algorithm (Brushed/Brushless DC, Stepper etc.) Knowledge of wireless technology Working on VS Studio Programmable Logic Controller (PLC) Programming and Electrical Design of: o Allen-Bradley, Siemens, Beckhoff Programmable Logic Controllers. o Codesys and ladder logic programming. o Servos and motion control experience. o Variable Frequency Drive (VFD) programming and setup. o Network Protocols - Serial, Ethernet IP, Profinet, MODBUS TCP/IP, EtherCAT. o Warehouse control system software interface and protocols. o Human-machine Interface system design - TIA PORTAL, Rockwell FTV studio, Ignition. Scanner and Machine vision system interface Troubleshooting process controls, electrical equipment, sensors, valves, motors, & drives. Working Knowledge of equipment wiring practices and relevant codes (NEC, NFPA 79, UL 508A, etc.) Experience using Git for revision control of industrial control schematics and software. Basic mechanical understanding/aptitude, comfortable using simple hand tools. Experience working on multiple projects at one time E-Commerce Material Handling Systems Experience. Responsibilities: Develop firmware for a variety of embedded products. Create project and technical reports as required and help define product architecture. Participate in the schematic/layout review process and test and evaluate prototypes from initial engineering samples to mass production Aid in the design and development of equipment and systems related to warehouse automation, and redesign of existing systems to fulfill customer requirements. Provides reporting, and technical document management for the PLC Controls Engineering portion. Works closely with other engineering functional teams and manages the scope and schedule. Collaborate with engineering teams like Software and Mechanical and Firmware Engineering. Executes all test plans on-site, both internal and external customer acceptance/SAT /FAT. Have fundamental understanding of HW product development, manufacturing, simulation methods and techniques, FMEA and other DFSS/engineering principles. Excellent interpersonal skills and an ability to interact successfully with all levels of management as well as a global team. Ability to multi-task and stay organized, Excellent analytical and problem-solving skills. Possess sound knowledge on PLCs, Oscilloscopes, Power source, Loads etc.. HTSIND2025 YOU MUST HAVE Minimum of 8-10 years of exp in embedded and Controls Engineering or similar role

Job Title Distribution Service Manager Location (Surat, India) About Us Job Summary We are seeking an experienced Service Engineer to install, commission, and maintain rotary air compressors. The ideal candidate will have a strong technical background, excellent problem-solving skills, and a customer-centric approach. The role involves frequent travel, overtime, and ensuring customer satisfaction while managing stakeholder requirements. Responsibilities Timely addressing of service issues of Critical customers of all distributors DSM effectiveness to maintain DSI for this region Attending issue resolution and escalation calls of CPs like WIP, RMS, Tech Direct,TAVANT and DSM coordination meetings Train develops and coach channel partners, skill mapping of all CPs Drive, track support warranty management process Monitoring and supporting QR code monitoring process and support generating revenue Iconn trigger management and issues management via same Supporting regional sales team with air-end opportunities through SPM & other more opportunities like VFD through Tech leads Basic Qualifications Qualification: 3years Diploma in Mechanical/Electrical Travel & Work Arrangements/Requirements As per the business requirement Key Competencies Compressor knowledge: In-depth understanding of rotary air compressors, including installation, commissioning, and maintenance. Strong mechanical skills, including troubleshooting and repair of compressors and related equipment. Familiarity with electrical systems, including control circuits and motor control. Understanding of pneumatic systems, including piping, valves, and controls. What we Offer We are all owners of the company! Stock options(Employee Ownership Program) that align your interests with the companys success. Yearly performance-based bonus, rewarding your hard work and dedication. Leave Encashment Maternity/Paternity Leaves Employee Health covered under Medical, Group Term Life & Accident Insurance Employee Assistance Program Employee development with LinkedIn Learning Employee recognition via Awardco Collaborative, multicultural work environment with a team of dedicated professionals, fostering innovation and teamwork. Special Accommodation If you are a person with a disability and need assistance applying for a job, please submit a request . Lean on us to help you make life better We think and act like owners. We are committed to making our customers successful. We are bold in our aspirations while moving forward with humility and integrity. We foster inspired teams. Colorado Resident? Bicycle rights prism poutine austin. Drinking vinegar gluten-free iceland, typewriter farm-to-table selfies XOXO food truck four loko. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please send a request and a member of our team will contact you.

Your Role Mission: To process Turnkey -EPC Customer Centre orders in respect of contractual specifications, delivery time and expected costs for entire Pre order Stage ( enquiry generation till receipt of order stage ) and Post order stage ( Order receipt to site handover stage ) Roles & Responsibilities:- You will be part of Project Management team and responsible for Proposal and Project execution activities Proposal:- You are the first point of contact for customer centres / Product Companies and customers for RFQ/ new project requests Be able to evaluate customer/end user RFQ requirements and specifications independently and translate the customer needs to our product portfolio You estimate together with the team the feasibility of a project in all its facets and internally agree whether a project should be handled within which required department To provide technically correct & commercially valid quotations by utilizing the company processes Understand Compressed Air system applications and be able to provide Pre-Calculation, Selection, and sizing of equipment s correctly To work along with Sales /Customer Centre / Product Company Proposal team for selection of AC make equipment s and propose complex system design for Compressed Air system applications Prepare costing sheet for entire package which consists of Air Compressor ,Air dryer and Auxiliaries (Presure vessels ,Valves ,Interconnecting Piping ,Cables ,Instruments ,LT&HT MCC ,PLCetc) Prepare System P&ID ,2D &3D Layout in Auto CAD software Project Management:- To act as main coordination link between End Customer, Consultant, Licensor, Factory, Supplier & Customer Centres He/she will be single point contact to End Customer He/she shall be single point responsible person to drive the project smoothly and ensure deliverables are provided on time and lead to successful completion of project To manage orders, achieving client satisfaction in terms of delivery and technical requirements To monitor the overall progress of projects against schedule and milestones reporting to management, as well as providing early warning of potential slippage, in case of the latter To keep management well informed on the high-level aspects of project execution Maintain detailed project files and applicable records in common server & Project Management System software To prepare project documents for customer centres as per the VDRL and follow up for product company documentation and ensure timely completion of documentation cycle Prepare GA,System P&ID ,2D &3D Layout drawings in Auto CAD software Follow-up with supplier & factory for manufacturing status Provide the monthly progress status in the customer/ AC format to the customer To be responsible for proper review and processing of variations and claims received from customer and factory To evaluate sub-vendor offers and select the appropriate vendor for Auxiliaries (Pressure vessels ,Valves ,Interconnecting Piping ,Cables ,Instruments ,LT&HT MCC ,PLC, etc) Travel to customer premises or sub-vendor locations as required to ensure smooth execution of project Lead, organize and coordinate the assigned project work during all project phases To manage budget, procurement and schedules for various projects Provide approved documents along with manufacturing schedule based on the commercial situation, inventory & time frame to the factory & supplier To propose remedial actions when needed so that the contract completion data for the work is not jeopardized Coordination of the inspection activity with factory, supplier, customer & TPI (Third party inspection agency) Participate in Site Acceptance Test (SAT) & Factory Acceptance Test (FAT) along with client at factory and vendors premises Provide compliance to customer/ inspection agency on non-conformance & obtain Inspection release note required to dispatch the material Site visit to ensure the actual installation in line with the technical documents/drawings To succeed, you will need Experience & Educational requirements BE / B Tech in Mechanical / Electrical Engineering / Instrumentation engineering with 4 - 10 years of experience in Proposal and Project execution in a EPC- Project Based engineering or product organisation preferably in Compressor ,Pump , Rotating Machinery or Project based Industry Exposure in handling international customer ,vendors will be an added advantage Software skill requirement: Must be proficient in - - AutoCAD Mechanical, - MS Excel ,MS Project Knowledge Sound knowledge and experience on, Screw & centrifugal compressors Air dryers ,Pump ,Heat exchanger ,Industrial Chillers ,Skid ,Containerised Packages Knowledge of Auxiliaries (Pressure vessels ,Valves ,Interconnecting Piping ,Cables ,Instruments ,LT&HT MCC ,PLC, etc) Good Command (Verbal & Written) of English is must Able to read & understand P&ID, GA, Layouts, Installation, System architect etc Strong Technical & commercial knowledge of Engineered rotatory equipment Able to work under pressure & plan & organize effectively with the right sense of urgency Able to work on multiple projects by giving due importance to each project Working knowledge of ASME/API/TEMA/IEC/IS/DIN/ ATEX/CCOE and other international Codes Working knowledge of PED Dossier ,documentation Strong interpersonal communication Knowledge of pressure vessels and heat exchanger is an added advantage Knowledge of Energy recovery products , Vacuum pump is an added advantage Knowledge of MS Projects is desired Foreign Language (French ,German ,Mandarin ) and PMP Certification is an added advantage Personality requirements Be able to adapt in a new environment Strong interpersonal communication Willingness to travel within the region and internationally This position is a key interface between customer and company, we are looking for a person with strong personality who can be an active driver In return, we offer you A work culture known for respectful interaction, ethical behaviour and integrity Access to Global Job Opportunities as a part of Atlas Copco Group Opportunities to grow and develop Potential to see your ideas realized and to make an impact City - Pune Last Day to Apply 05/06/2025

Your Role To process Turnkey -EPC Customer Centre orders for Pre order Stage ( enquiry generation till receipt of order stage ) and Post order stage ( Order receipt to site handover) with respect of contractual specifications, delivery time & expected costs ,He/She shall be responsible to handle Drawing and Design activities independantly which includes prepartion of P&ID ,SystemP&ID ,2D,3D Plant Layouts ,Bill of Material ,Site support for installation ,erection and commissioning phase To act as main coordination link between End Customer, Consultant, Licensor, Factory, Supplier & Atlas Copco Customer Centres He/she will be single point contact to End Customer He/she shall be single point responsible person to drive the project smoothly and ensure deliverables are provided on time and lead to successful completion of project To manage orders, achieving client satisfaction in terms of delivery and technical requirements To monitor the overall progress of projects against schedule and milestones reporting to management, as well as providing early warning of potential slippage, in case of the latter To keep management well informed on the high-level aspects of project execution Maintain detailed project files and applicable records in common server ,ic3 platform ,Project on line platform and Project Management System software To prepare project documents for customer centres as per the VDRL and follow up for product company documentation and ensure timely completion of documentation cycle Travel to customer premises or sub-vendor locations as required to ensure smooth execution of project Lead, organize and coordinate the assigned project work during all project phases To propose remedial actions when needed so that the contract completion data for the work is not jeopardized Participate in Site Acceptance Test (SAT) & Factory Acceptance Test (FAT) along with client at factory and vendors premises Provide compliance to customer/ inspection agency on non-conformance & obtain Inspection release note required to dispatch the material Site visit to ensure the actual installation in line with the technical documents/drawings Ensure proper detailed information exchanged with aftermarket team and coordinate when required to ensure safe and smooth start-up and commissioning To succeed, you will need Experience & Educational requirements BE / B Tech in Mechanical engineering with 6 to 9 years of experience in project execution in a EPC- Project Based engineering or product organisation preferably in Compressor ,Pump or in Rotating Machinery Industry Software skill requirement: Must be proficient in - AutoCAD Mechanical, Auto CAD Plant 3D ,Revit ,Inventor professional Micro soft office Tools - MS Excel,word ,Powerpoint, MS VISIO Knowledge:- Sound knowledge and experience on Pumps , Screw & centrifugal compressors Sound Knowledge on Auxiliaries items like Valves ,Pipe & pipe fitting ,Field instruments ,Cooling water pumps ,Cooling tower ,PLC,Electrical panels ,Cables etc Sizing ,selection ,Calculations for Auxiliaries systems like colling water system, Compresed Air syetems ,Ducting , Piping ,Pressure drop calculations , Vetilation ,louvers ,exhaust Fan selection and sizing Knowledge about CFD analysis, Wind Analysis ,Stucture analysis ,Sismic analysis will be an addded advantage Good Command (Verbal & Written) of English is must Able to read , understand,Prepare P&ID, GA, Layouts, Installation, System architect etc Strong Technical & commercial knowledge of Engineered rotatory equipment Able to work under pressure & plan & organize effectively with the right sense of urgency Able to work on multiple projects by giving due importance to each project Working knowledge of ASME/API/TEMA/IEC/IS/DIN/ ATEX/CCOE and other international Codes Strong interpersonal communication Knowledge of pressure vessels and heat exchanger is an added advantage Knowledge of MS Projects is required PMP Certification & Proficiency in Foreign Language will be an added advantage Personality requirements Be able to adapt in a new environment Strong interpersonal communication Willingness to travel within the region and internationally This position is a key interface between customer and company, we are looking for a person with strong personality who can be an active driver In return, we offer you A work culture known for respectful interaction, ethical behaviour and integrity Access to Global Job Opportunities as a part of Atlas Copco Group Opportunities to grow and develop Potential to see your ideas realized and to make an impact City - Pune Last Day to Apply 05/06/2025

Candidate shall have basic knowledge of Purchase process. Experience in fabrication industry. Should have knowledge about welding. Experience in purchase of Tubes, Tube sheets, Forgings, valves, pumps, filters etc. Capable to develop new vendors for new items. Preparing proposals. Academic Qualifications Bachelor of Engineering / B. Tech Mechanical. Preferred Skills SAP knowledge MS office Ability to manage a team Ability to coordinate between cross-functional teams Attention to details Domain Knowledge Payment Terms Incoterms Negotiation skills Fluency in English IT Proficiency MS Office (PowerPoint and Excel) SAP Instruction for Application Please read the JD carefully before submitting your application. All applications must be supported with updated resume. Please visit our company website www.gasprocessing.in for details about the company. In case of any queries please contact our HR department.

Application Engineer Job Application Engineer Location Remote (currently)/Thane Basic Details Organization Name: R.K. Control Instruments Pvt. Ltd. Industry: Control Valve Manufacturing Work Location: Remote (currently)/Thane Reports to: Application Manager Department: Application Working days: Saturday to Thursday Timing: 8:30 am to 5:30 pm Website: http://rkcipl.co.in Description Performing detailed reviews of customer specifications, providing comments, clarifications and alternatives to customer requirements. Sizing and selection of valves, actuators and preparing techno-commercial quotations as per customer s technical requirements. Coordinating with client and internal departments as required, in order to minimize technical and cost risk. Sending quotations accurately and on-time, including all technical and commercial, terms and conditions, customer documentation requests. Participating in the customer negotiation process, including commercial and technical negotiations. Performing PO reviews to ensure that all critical elements are correct and take up with Sales engineer and/or customer in case of any discrepancies, and get PO amendment if required. Creating the order transfer file for submission to the factory in accordance with PO. Supporting factory for any post order activities. Specifications Minimum Requirements Education: BE (Instrumentation/Mech.) Mandatory Experience: 1 to 4 years of experience in the application profile in control valve or related industry. Skills/Competencies: Knowledge of GA drawings Communication skill Presentation skill Negotiation skill Team player Humility Learning oriented Proactive Should have Customer focus Understand Customer needs

Basic Details Organization Name: R.K. Control Instruments Pvt. Ltd. Industry: Control Valve Manufacturing Work Location: Thane West (Factory) Reports to: QA Manager Department: Quality Control Working days: Saturday to Thursday Timing: 8:30 am to 5:30 pm Website: http://rkcipl.co.in Description a. Receipt & In-process QC 1. To carry out inspection and record the results of material inward. 2. To verify and compare product with the specification given in the Work Order. 3. To prepare and maintain inspection and test records. 4. To verify and correlate vendor s test certificates with the product during receiving inspection. 5. To maintain vendor s Test Certificates. 6. To coordinate and carry out inspection at vendor s premises wherever specified in the purchase documents. 7. To ensure that conforming materials are used for the production and that inspection results are available. 8. To maintain Positive identification and recall register for receiving inspection. 9. To perform in-process inspection of machined components and maintain records as applicable. 10. To identify the non-conformity during receiving inspection, maintain non-conformity log and ensure that all NCRs are closed. 11. To present the non-conformity log during management review meeting. 12. To ensure that only calibrated measuring and test instruments are used during inspection. 13. To understand and follow the quality plan. 14. To follow the applicable documented procedures. 15. Being an auditee to give necessary information to auditors, acknowledge CARs, and carry out corrective actions as specified in the CAR. 16. To report any problem faced in implementing or maintaining the quality system to the superiors. 17. To understand the Quality Policy and follow the same. 18. Prepare the MIS reports and demonstrate compliance to the Quality Objective, as specified in the Key Process Sheet. 19. Implement corrective actions to ensure the Quality Objectives are met. b. Final QC To perform and accept the final check of finished valves. To authorise dispatches and test certificate of finished products. To maintain product identification and traceability of finished valves till dispatch. To raise Non-Conformance Report (NCR) when the products released under positive identification and recall procedure are found non-conforming. To update the Checklist Specifications Minimum Requirements Education: BE (Mech.) / D.M.E Mandatory Experience: 3 years and above of experience from manufacturing industry of engineered products. Skills/Competencies: 7 QC tools Ability to read and understand engineering drawings Knowledge of measuring and testing instruments Attention to detail Time management Conversational ability Agility and hard-working Problem-solving approach Ability to operate under pressure

Job Title: Instrumentation Specialist Summary: The Instrument Engineer is responsible for maintenance of the instrumentation for all plant operations, including field installations and associated control devices in local and remote would be responsible for developing maintenance and reliability related to the instrumentation. Responsibilities Include: Provides technical support for the maintenance, operation, and troubleshooting of the plants instrumentation systems and equipment, including low voltage electrical systems, Distributed Control System and machinery controls Investigates instrumentation equipment failures and recommends actions to enhance the system and equipment reliability Develops instrumentation equipment specifications and associated reliability improvements/upgrade plans for that equipment Maintenance plan and operating procedures for instrumentation equipment Serves as a technical resource to maintenance team Has knowledge of electrical area classifications and is familiar with acceptable methods of satisfying the requirements of equipment installations in hazardous areas. Qualifications: The following are required for the role Bachelors degree (EIE / ICE) with 2-3 years of experience in the industry. Manufacturing plant experience in instrument engineering. Ability to work with cross-functional team and wide variety of personnel at different levels of engineering, maintenance, management and internal customers as well as suppliers. Good interpersonal skills. Knowledge of DCS. Knowledge of Transmitters, Flowmeters, Control/On-Off valves and all field related instruments. Knowledge in SAP. Work experience in chemical production units and awareness of surroundings from a safety and environmental point of view. Good communication skills. What We Offer: At Momentive, we value your well-being and offer competitive total rewards and development programs. Our inclusive culture fosters a strong sense of belonging and provides diverse career opportunities to help you unleash your full potential. Together, through innovative problem-solving and collaboration, we strive to create sustainable solutions that make a meaningful impact. Join our Momentive team to open a bright future. #BePartoftheSolution About Us: Momentive is a premier global advanced materials company with a cutting-edge focus on silicones and specialty products. We deliver solutions designed to help propel our customer s products forward products that have a profound impact on all aspects of life, around the clock and from living rooms to outer space. With every innovation, Momentive creates a more sustainable future. Our vast product portfolio is made up of advanced silicones and specialty solutions that play an essential role in driving performance across a multitude of industries, including agriculture, automotive, aerospace, electronics, energy, healthcare, personal care, consumer products, building and construction, and more. Momentive believes a diverse workforce empowers our people, strengthens our business, and contributes to a sustainable world. We are proud to be an equal opportunity employer . Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any characteristic protected by law. To be considered for this position candidates are required to submit an application for employment and be of legal working age as defined by local law . An offer may be conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations . Note to third parties: Momentive is not seeking or accepting any unsolicited assistance from search and selection firms or employment agencies at this time.

Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D equivalent. Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting. Experience in hotel engineering or maintenance a plus. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Driver s License .

Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D equivalent. Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting. Experience in hotel engineering or maintenance a plus. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Driver s License .

Key competencies include strong product knowledge, excellent networking, communication & interpersonal skills, strategic planning, result orientation, analytical thinking, and willingness to travel for business development.

Responsible for handling of day-to-day Instrumentation activities in unit-III blocks. Responsible for timely closure of work orders attend shift works with priority. Responsible for maintenance, calibration troubleshooting of FCV, Flow meters, PRV, BPRV, on off Valves, DCS, Instruments trouble shooting, data loggers, Hygrometers, weighing balance, weighing scales and legal metrology compliances etc. Responsible for calibration schedule monitoring calibrations of Instruments as per schedule. Responsible for document preparation, records maintenance, logbook recording as per Good Documentation Practices (GDP). Responsible for reviewing the external agency calibration certificates. Responsible for provide biometric access to authorized persons into restricted areas. Responsible for verification of Time synchronization in biometric access system Digital clocks. Responsible for interlocks verification in DCS. Responsible for Testing of Hooter as per schedule. Responsible for Battery replacement of wireless data loggers as per schedule. Responsible to prepare qualification documents for new systems along with users. Responsible for activities to be carried out in compliance with GMP Data integrity. Responsible to keep instrumentation department/documents ready for audits. Responsible to comply all statutory and EHS requirements. Responsible to follow work procedures work permit systems during work execution. Responsible to support investigations for deviations, incidents, accident, near miss etc. Responsible for the work of senior in the absence of senior. Responsible for spares management, Intimation of Instrumentation items stock level to superiors for procurement. Responsible to support during Projects activities or modification activities in plants. Responsible for PM activities of equipments and DCS systems. Diploma In Electrical / Eectronics / B. Tech in EEE