976 Utility Maintenance Jobs - Page 5

Role & responsibilities Perform routine maintenance and troubleshooting of electrical systems including lighting, power distribution, and control circuits. Operate and maintain Diesel Generators (DGs), ensuring availability during power outages. Conduct regular checks and servicing of HT (High Tension) and LT (Low Tension) electrical panels and switchgear. Monitor and maintain transformers for proper voltage output and temperature levels. Execute utility maintenance tasks including inspection and servicing of electrical meters, UPS systems, and distribution boards. Identify faults in electrical circuits and perform timely repairs to avoid operational disruptions. Record and maintain logbooks for electrical loads, DG operation, transformer status, and panel readings. Support energy conservation initiatives and efficient power usage within the facility. Follow all safety standards, lockout-tagout (LOTO) procedures, and company policies while performing tasks. Assist in preventive and breakdown maintenance schedules in coordination with the maintenance team. Maintain inventory of electrical spares, tools, and safety gear. Preferred candidate profile ITI / Diploma in Electrical Engineering or Wireman License holder (preferred). Minimum 2 years of experience in a commercial/industrial electrical maintenance environment. Hands-on experience with DG set operations and electrical panel maintenance. Good knowledge of HT/LT systems, transformers, and protection relays. Experience in working with utility service providers and electrical audits is an advantage.

HT & LT electrical line control process. DG set and DG control panel. UPS online with main panel sink process. AHVAC/ process chiller/ AHU chiller. Air compressors and line distribution process. cooling tower/ ETP/ STP/ RO/ Boiler/ water purifier.

Role & responsibilities Perform preventive and breakdown maintenance of mechanical and plant machinery. Maintain and repair gearboxes, bearings, shafts, chains, couplings, and pumps. Align and level motors, gearboxes, and rotating equipment. Install, dismantle, and overhaul machines and assemblies. Maintain hydraulic and pneumatic systems (cylinders, valves, hoses, compressors). Troubleshoot issues in paint machines, grinders, MIG/TIG welding machines (mechanical parts), EOT cranes, and conveyors. Support utility maintenance compressed air lines, cooling systems, and material handling equipment. Maintain lubrication schedules, oil levels, and greasing routines. Document maintenance activities, logbooks, and checklists. Preferred candidate profile Education: ITI Fitter / Diploma in Mechanical Engineering Experience: 5 years in industrial/mechanical maintenance Hands-on knowledge of preventive and corrective maintenance in manufacturing environments. Interested candidates can share thier profiles at Priya.singh@elematic.com

We invite Engineering graduates, ITI and Diploma holders to participate in our Walk-in Drive and become a valued part of the Althera family. Please carry a copy of the following documents with you: Updated Resume Recent Payslips/Increment letter and appointment letter Relieving Letter (if applicable) Educational Qualification Certificates We look forward to meeting talented professionals like you. Join us and take the next step in your career with Althera! Vacancy for: 1. Technician/ Specialist Engineering (ITI or Diploma with 2 to 3 Years Experience) : Being a Specialist in Engineering and Maintenance, Major responsibilities include daily work, all the engineering-related routine and non-routine Activities. Execute the maintenance activities when assigned by the immediate superior. Involved in Project execution. To bring to the notice of superiors any process changes to improve productivity and quality of the product. Monitoring and daily operation of Utility equipment as per SOP. Maintaining Logs of utilities as per the SOP. Planning and doing the Preventive maintenance of all utility and Production Equipment. Execution of Calibration of all measuring equipment in the facility. To bring to the notice of the superior any accidents and injuries. To implement cGMP in the Department. Working in compliance with SOPs and Policies of the company. 2. Asst.Manager / Sr.Executive, Engineering & Projects (BE Mechanical or Electrical with 5 to 8 Years Experience in OSD) : 1. Facility Maintenance: Oversee preventive and breakdown maintenance of HVAC, utilities, & cleanroom systems. Ensure proper functioning of water systems (WFI, RO, Purified Water) and other critical equipment. 2. Utility Operations: Manage steam, compressed air, chilled water, and electrical systems. Monitor energy usage and promote energy efficiency initiatives. 3. Documentation & Compliance: Ensure GMP-compliant documentation for equipment qualification (IQ, OQ, PQ), maintenance logs, and calibration records. Handle audits (regulatory, customer, internal) and ensure compliance with cGMP, USFDA, MHRA, WHO guidelines. 4. Vendor Management: Coordinate with equipment suppliers, contractors, and service providers. Review AMCs service contracts. 5. Project Execution: Plan, schedule, and implement new projects (greenfield, brownfield, expansion, modifications). Track progress against project timelines, cost, and quality. 6. Equipment & Utility Installation: Oversee installation and commissioning of manufacturing and packaging equipment. Ensure adherence to safety and GMP requirements during execution. 7. Cross-functional Coordination: Liaise with production, quality, safety, and validation teams for seamless project integration. Coordinate with architects, consultants, & contractors during design and construction phases. 8. CAPEX Planning: Prepare capital expenditure proposals and ROI justifications. Monitor project budgets and control costs. 9. Design; Create and Review facility layouts for production, warehouse, utility, and QC areas Ensure proper flow of personnel, materials, and waste as per GMP norms.

As a Mechanical Maintenance Engineer at our [Plant/Factory Location] in Pune, you will be responsible for a wide range of maintenance tasks to ensure the smooth operation of various utilities and machinery. Your key skills will include utility maintenance for equipment such as boilers, compressors, chillers, cooling towers, stackers, and EOT cranes. Additionally, you will be proficient in hydraulics maintenance, breakdown maintenance, preventive maintenance, and overall plant maintenance. Experience with machine maintenance, especially in the rubber industry SPM's, will be a valuable asset to excel in this role. This is a full-time and permanent position suitable for freshers looking to establish their career in mechanical maintenance. The role will involve working in rotational shifts at the plant location. In return, we offer a range of benefits including food provision, health insurance, leave encashment, paid time off, and provident fund contributions. You will also have the opportunity to earn performance bonuses, shift allowances, and yearly bonuses based on your dedication and contributions to the team. If you are someone who enjoys hands-on maintenance work and thrives in a dynamic environment, we encourage you to apply for this position and be a vital part of our maintenance team in person.,

Titlle : Manager 1 Engineering Educational Qualification : B Tech/BE Electrical/ Electronics & Instrumentation Engineering Experience: 14 years & above Requirement : 1. To ensure prompt attention and resolve issues of all operational and breakdown maintenance activities related to Utilities, HVAC System, and Water System. 2. To ensure timely execution of Preventive Maintenance of Utilities, HVAC System, Water System & Process Machineries performed as per the SAP schedule and maintain accurate record of the same. 3. To provide Technical assistance & Support for efficient operation of ETP. 4. Review and approve QMS related activities in EDMS & Trackwise systems to ensure compliance and documentation Integrity. 5. Responsible for Compliance of Internal & External Audits. 6. Tracking WBS code for all, CAPEX, Projects & Aspire Projects 7. Conduct Monthly review of MTTR, MTBF & KPIs 8. Following up with OEM, third Party service s & AMC to ensure timely service delivery and issue resolution. 9. Maintaining and ensuring Safety and discipline for all engineering related work and personnel of Engineering. 10. To provide Training to Subordinates to enhance their operational efficiency. 11. To performed any other duties assigned by HOD.

Maintenance Manager Job description Key Responsibilities: Develop and implement preventive and predictive maintenance programs. Lead, train, and supervise the maintenance team to ensure optimal performance and safety. Schedule and coordinate day-to-day maintenance tasks to minimize downtime. Manage maintenance budgets and control costs related to spare parts, labor, and equipment. Ensure compliance with safety regulations and company policies. Troubleshoot mechanical, electrical, and systems issues and provide timely solutions. Maintain records of equipment and maintenance history. Coordinate with production and engineering teams for maintenance planning and upgrades. Identify areas for continuous improvement and implement efficiency-enhancing measures. Prepare Maintenance Chart for every machinery and Plant. Interested send their updated resume to Email Id hrd.recruitmentconsultants@gmaildotcom & WhatsApp or Call - 9.2.1.1.6.1.8.4.4.8 / 9.7.1.7.2.2.1.3.8.9

We are looking for a skilled Engineering Manager with 10-20 years of experience to lead our electronics team at Miko.ai. The ideal candidate will have a strong background in electronics and engineering management. Roles and Responsibility Manage and oversee the development of electronic systems and components. Collaborate with cross-functional teams to design and implement new products. Develop and implement testing procedures to ensure quality and reliability. Troubleshoot and resolve technical issues related to electronics. Mentor and guide junior engineers and technicians. Ensure compliance with industry standards and regulations. Job Requirements Bachelor's degree in Electronics or Electrical Engineering. Proven experience in engineering management, preferably in the IT Services & Consulting industry. Strong knowledge of electronics, electrical systems, and software development. Excellent leadership and communication skills. Ability to work in a fast-paced environment and meet deadlines. Strong problem-solving and analytical skills.

Job Title: Maintenance Engineer Injection Moulding & Hydraulic Systems Experience Required: 3 to 9 Years Location: Bhiwandi Kalyan. Department: Maintenance / Engineering Reports To: Plant Head Key Responsibilities: Preventive & Breakdown Maintenance: Plan, execute, and monitor preventive maintenance schedules for injection moulding machines Perform quick diagnosis and corrective actions during machine breakdowns to minimize downtime. Maintain hydraulic systems, valves, pumps, and circuits across all moulding machinery. Injection Moulding Machine Handling: Experience in setting up, troubleshooting, and servicing injection moulding machines. Understand mold changing procedures and assist in timely mold changes. Monitor machine parameters and optimize cycle time and energy usage. Hydraulic & Pneumatic Systems: Inspect, maintain, and repair hydraulic and pneumatic components. Troubleshoot hydraulic failures, conduct oil analysis, and manage leakage controls. Maintain hydraulic drawings and update service history records. Utility & Auxiliary Equipment: Ensure operational readiness of chillers, compressors, mold temperature controllers, Manage maintenance for DG sets, air dryers, and cooling towers. Spare Parts & Documentation: Maintain inventory of critical spares and coordinate procurement needs. Document maintenance activities, machine history, and breakdown records. Safety & Compliance: Adhere to safety protocols and statutory maintenance requirements. Support audits (ISO/TS 16949, IATF, etc.) and ensure compliance of all maintenance operations. Key Skills & Competencies: Strong knowledge of hydraulic circuits , pneumatic systems , and PLC-controlled machinery . Experience in injection moulding machine maintenance and mould troubleshooting . Ability to read and interpret mechanical and hydraulic diagrams. Basic understanding of electrical circuits and automation systems . Good analytical and problem-solving skills. Qualifications: Diploma / B.E. / B.Tech in Mechanical / Electrical / Industrial / Mechatronics Engineering. Certifications in hydraulic/pneumatic systems preferred.

Key Responsibilities: Oversee the operation, maintenance, and reliability of all mechanical systems and equipment within the manufacturing plant (e.g., pumps, compressors, conveyors, fans, valves, piping, utility systems). Perform routine and preventive maintenance activities to ensure minimal downtime and optimal equipment performance. Diagnose mechanical issues, conduct root cause analysis, and implement corrective actions to prevent recurrence. Coordinate and supervise contractors or technicians during repairs, overhauls, and project work. Ensure that all mechanical systems comply with safety, quality, and environmental standards. Monitor spare parts inventory and raise requisitions for timely procurement. Support continuous improvement initiatives to enhance plant efficiency and reduce operational costs. Prepare maintenance reports, work logs, and equipment history records. Assist in planning and executing shutdowns, overhauls, and new equipment installations. Collaborate with other engineering teams (electrical, instrumentation) and production teams for smooth plant operations. Desired Skills & Competencies: Strong knowledge of mechanical equipment, rotating machinery, and utility systems. Ability to read and interpret mechanical drawings and equipment manuals. Good understanding of preventive and predictive maintenance practices. Problem-solving skills with a practical, hands-on approach. Familiarity with health, safety, and environmental (HSE) standards. Good communication and team coordination skills. Education & Experience: Bachelors degree / Diploma in Mechanical Engineering. 4–7 years (or as required) of experience in a manufacturing or industrial plant environment. Experience with Maximo or any CMMS (Computerized Maintenance Management System) is an advantage.

1.Experience in maintenance of CNC and SPM machines. 2.Strong knowledge of mechanical and hydraulic circuits and drawings. 3.Sound knowledge of pneumatic and hydraulic circuits and logic. 4.Hands-on experience with drives, servo motors, etc Required Candidate profile 5.Hands-on experience in preventive, productive, and condition-based maintenance implementation. 6.Monitoring MTBF, MTTR, and conducting downtime analysis using tools like Why-Why Analysis.

Business: Property and Asset Management, Hyderabad What this job involves You will be ensuring that all technical services are maintained operational during your shift duty. Taking charge of entire technical assets in building, managing engineering team and supporting the Property Manager / Assistant Property Manager your team leader for coordinating for technical issues with client and occupants. Your key deliverables will be to: Manage and maintain electromechanical / utilities services at the site with the help of technician team. Prepare and implement planned preventive maintenance (PPM). Conduct inspections at site regularly to check for risk / defects areas. Review work of subordinate staff and provide guidance when needed. Ensuring the documentation, checking and follow up of the assets under defect liability period and AMC/CAMC in a tracker. Be responsible for hiring, training and development of shift engineers and maintenance staff. Formulating suitable budgeting controls and Monitoring SLAs & KPIs for JLL and outsourced agencies towards effective service deliverance. Maintaining service level agreements and keeping performance indicator scores above excellence. Ensuring timely renewal of the agreement, submission of invoices and follow-ups for the payments. Overseeing all vendor quotations and invoices. Ensure proper signoffs for attendance and all the required details for cost sheet submission. Ensuring timely submission of client approved cost sheet to JLL office and following up for the invoice. Schedule monthly vendor meeting to discuss on daily matters & ensure corrective actions are taken for the same. Planning and implementing for energy conservation. Prepare monthly readings sheet with occupants and ensure all check-sheets and logbooks are being filled properly as per the schedule Maintain history cards for all equipments. Attend major complaints & escalate to senior & co-ordinate with technical staff if necessary. Ensure work permits are in place and safe working practices /procedures are followed. Assist the Property Manager/ Assistant Property Manager/ Technical Manager in conducting risk assessment of the building operations and work towards mitigation of highlighted inherent risks and in conducting root cause analysis in case of system failure and breakdowns. Create corrective, preventive and emergency response action plans. Take part in evacuation Drills and be a part of ERT/QRT team. Maintain engineering and other reports like DMR and MMR. Work closely with the regional RO / HO / SME/ Training teams and ensure closures of all required reports. Facilitate the services under the Slogan No Safety No Work. Reporting: You will be working with our operations team and reporting to the Property Manager / Technical Manager. Sound like you Here is what were looking for: Being Analytical and Meticulous Your role will involve coordination with various teams. You will be paying attention to detail and have excellent problem-solving skills. You will be using logic to trouble shoot problems; and assign and monitor maintenance projects. You should have a good knowledge of the working procedures. Qualifications You will have a Degree / Diploma in Electrical/Mechanical OR any equivalent, with min 3-5 years of work experience in Real Estate/ Hotel or Construction Industry. For residential sites candidates with residential experience will be preferred.

Role & responsibilities Electrical and Mechanical maintainence work. Preferred candidate profile iti electrical iti mechanical

This role involves the development and application of engineering practice and knowledge in designing, managing and improving the processes for Industrial operations, including procurement, supply chain and facilities engineering and maintenance of the facilities. Project and change management of industrial transformations are also included in this role. - Grade Specific Focus on Industrial Operations Engineering. Develops competency in own area of expertise. Shares expertise and provides guidance and support to others. Interprets clients needs. Completes own role independently or with minimum supervision. Identifies problems and relevant issues in straight forward situations and generates solutions. Contributes in teamwork and interacts with customers.

This role involves the development and application of engineering practice and knowledge in designing, managing and improving the processes for Industrial operations, including procurement, supply chain and facilities engineering and maintenance of the facilities. Project and change management of industrial transformations are also included in this role. - Grade Specific Focus on Industrial Operations Engineering. Develops competency in own area of expertise. Shares expertise and provides guidance and support to others. Interprets clients needs. Completes own role independently or with minimum supervision. Identifies problems and relevant issues in straight forward situations and generates solutions. Contributes in teamwork and interacts with customers. Skills (competencies)

This role involves the development and application of engineering practice and knowledge in designing, managing and improving the processes for Industrial operations, including procurement, supply chain and facilities engineering and maintenance of the facilities. Project and change management of industrial transformations are also included in this role. - Grade Specific Focus on Industrial Operations Engineering. Develops competency in own area of expertise. Shares expertise and provides guidance and support to others. Interprets clients needs. Completes own role independently or with minimum supervision. Identifies problems and relevant issues in straight forward situations and generates solutions. Contributes in teamwork and interacts with customers.

Responsibilities: * To attend the service and compliance *To assemble the machinaries * Maintain machinery and equipment * Conduct regular inspections and preventative maintenance REQUIREMENTS:- Basic knowledge in engineering & Electrical fields Food allowance Health insurance Annual bonus Provident fund Office cab/shuttle

HOLOSTIK is one of the trusted and leading names in the Authentication Solution Provider of Holograms, Labels and Holographic products in India. Established in the year 1991, we have gained a strategic position in the market and have become an industry leader for security holograms & Labels in India. For more details, kindly visit the company website. Security Printing & Packaging || Products Hologram, Label, Packaging Product To lead and manage the maintenance function for a label / Hologram printing facility with advanced flexographic and digital presses. Must have an In-depth understanding of Flexo printing machinery. Ensure optimal uptime, preventive maintenance, and technical efficiency of all machines, automation systems, and plant utilities while driving continuous improvement. Hands-on experience with PLC/SCADA systems, servo systems, and automation platforms. 1015 years in maintenance within the label/packaging industry (preferably Flexo) B.E./B.Tech in Mechanical / Electrical / Industrial Engineering [Diploma holders with rich relevant experience may also be considered] At Plant – Gr. Noida [Village Kasna, Eco Tech – I, U.P] Plant Heads & Directors 1. Equipment Maintenance & Uptime: Oversee maintenance of flexographic presses (Bobst), digital presses, slitter-rewinders, inspection systems, and die-cutting units. Manage real-time breakdown support with a focus on minimizing downtime. Lead preventive, predictive, and condition-based maintenance schedules. 2. Automation & Digital Systems: Ensure upkeep and troubleshooting of PLC, HMI, servo drives, and automation systems. Coordinate with OEMs for updates, calibration, and system diagnostics on digital printing platforms. Support IoT-based equipment monitoring and automation upgrades for efficiency tracking. 3. Maintenance Strategy & Planning Develop CMMS-based maintenance planning, reporting, and spare parts control. Plan and execute scheduled shutdown maintenance with minimal impact on production. Analyse machine performance data and plan technical improvements. 4. Utilities & Infrastructure Manage uninterrupted operation of compressors, chillers, AHUs, UPS, DG sets, and power distribution. Monitor temperature/humidity control systems critical for printing press environments. Ensure EHS compliance for electrical panels, fire systems, and pressroom safety. 5. Team Leadership Problem-solving approach with strong team leadership and communication skills. Supervise a team of technicians and shift engineers. Train staff in troubleshooting Flexo/digital equipment, electrical diagnostics, and press automation. Promote safety, 5S, and GMP standards across the maintenance area. 6. Vendor, AMC & Cost Control Oversee all AMC and service contracts. Optimize maintenance costs through spare parts standardization, vendor audits, and efficient resource planning. Liaise with OEMs and third-party vendors for remote diagnostics and service visits. 7. Projects & Continuous Improvement Lead installation & commissioning of new equipment’s. Drive TPM, Lean Maintenance, and Root Cause Analysis (RCA) programs. Recommend machine upgrades, retrofits, and automation improvements for quality and output.

Role & responsibilities: Outline the day-to-day responsibilities for this role. Preferred candidate profile: Specify required role expertise, previous job experience, or relevant certifications.

Position Purpose : To support manufacturing function to maintain continuity in production by maintaining and improving machine maintenance activity. To undertake scheduled and breakdown maintenance of equipment. Ensure that industrial machinery and equipment runs smoothly and reliably. Main tasks and responsibilities : Proficient with troubleshooting & maintenance of CNC machines, Grinding machines, general purpose machines, MIG/TIG Welding machines. Exposure to maintenance of utilities like air compressors., DG sets, water pumps, air conditioners etc. Awareness & exposure to ERP/ISO/5S/Quality management system Technical supervision & labour handling. Ensuring compliance with statutory, health & safety regulations. Independently handling shift with given technical manpower. Ready to work in 3 shifts with staggered weekly off. Coordination with all user departments & also with external service provider. Working experience in Excel. Word, PP for reporting. Competency Awareness & exposure to ERP/ISO/5S/Quality management system Working experience in Excel. Word, PP for reporting. Required Experience and Qualification: Diploma in Engineering (Mech) with 6-7 years of experience Degree in Engineering (Mech) minimum 4-6 years of experience READY TO WORK IN SHIFTS Experience in Machine maintenance and Utility maintenance is MUST ISO related experience is preferred

All Mechanical Related Maintenance work In Chemical Plant Lead Team Of Supervisors And Staff Work Distribution Among Staff Members And Section Support To The Unit Head Engineering And GMW Agro Chem/ Pesticide Machinery Maintenance Is essential Required Candidate profile BE - Mechanical - DME 12 + Years Experience in Maintenance Department Of Chemicals Plant Last 3 Years As Department Head - Managerial Position Must Be Able To Run Department Independently As Head

Position Summary : Maintenance Engineer ensures the reliable operation of equipment and systems in an API manufacturing facility, focusing on both preventive and breakdown maintenance. They are responsible for maintaining, repairing, and optimizing machinery, utilities, and infrastructure to ensure continuous and compliant production of APIs. About Us : Royal Pharma is a trusted pharmaceutical company with global recognition. With our USFDA Approved facility and WHO GMP Certification, we ensure the highest standards of quality, safety, and efficacy. We are also ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 Certified. With over 15 years of experience, we specialize in advanced intermediate and API manufacturing. Collaborating with top multinational companies, we have expanded our reach worldwide. Role & responsibilities : 1. Shall responsible for maintenance of all utilities like Boiler, CT, CW,Water System, Vacuum System, AHU, scrubber system 2. Shall responsible for handling documentation for all utilities like Boiler, CT, CW,Water System, Vacuum System, AHU, scrubber system 3. Shall be responsible for carrying out preventive maintenance of all the plant machinery as per schedule planned 4. Shall be responsible for carrying out preventive maintenance of all the pumps, pipe lines as per schedule planned 5. Shall responsible for handling documentation for all plant machineries like GLR, SSR Reactor,CF, TD,MM, VS etc 6. Shall be responsible for carrying our all the Routine Engineering and Maintenance Activities 7. Shall be responsible for prepation of engineering documents like DQ, IQ, OQ, PQ 8. Shall be responsible for identifying new vendors, qualifying them for any maintenance related activities 9. Shall be responsible for vendor finalization, taking enquires, rate negotiation and PO preparation for maintenance related work Preferred candidate profile Educational Qualification should be Diploma / Degree - Mechanical Having 5 Years Experience in Mechanical Must Have Experience in Mechnical Work. Proactive & Goal-oriented with a track record of meeting or exceeding targets and deadlines. Ability to multitask and prioritize tasks in a fast-paced environment No compromise on Persistence, Perseverance, hardworking

Key Responsibilities: Develop and implement preventive and predictive maintenance programs. Lead, train, and supervise the maintenance team to ensure optimal performance and safety. Schedule and coordinate day-to-day maintenance tasks to minimize downtime. Manage maintenance budgets and control costs related to spare parts, labor, and equipment. Ensure compliance with safety regulations and company policies. Troubleshoot mechanical, electrical, and systems issues and provide timely solutions. Maintain records of equipment and maintenance history. Coordinate with production and engineering teams for maintenance planning and upgrades. Identify areas for continuous improvement and implement efficiency-enhancing measures. Prepare Maintenance Chart for every machinery and Plant.

Utility & Plant Maintenance Breakdown Maintenance Preventive Maintenance Mechanical Maintenance

Job Description :- Maintenance Officer / Sr. Officer Scicore Nutra Private Limited is a state-of-the-art facility, located in Sanand Gujarat, is dedicated to producing high-quality nutrition products that are safe, effective, and meet the highest standards of quality. Our team of experts is committed to ensuring that every product we manufacture is produced with the utmost care and attention to detail. At our manufacturing unit, we use only the best raw materials and employ advanced manufacturing processes to ensure that our products are of the highest quality. We also adhere to strict quality control measures to ensure that every product meets our rigorous standards. This starts with doing a rigorous vendor qualification as well as testing of all raw materials supplied by these vendors for every batch. We do in-house stability studies to make sure our products last the full shelf life and give the best results to our customers. Our goal is to provide our customers with nutraceutical products that promote health and wellness, and we are committed to using science-backed ingredients and formulations to achieve this goal. We are also committed to continuous innovation and improvement and are always looking for new ways to enhance our products and processes. Benefits Provided: 1 free Air-Conditioned Transportation to the Factory 2 Paid Leave 3 Tea/Coffee & Canteen Facility 4 Accident Insurance 5 Provision for Bonus & Gratuity 6 Training programs for professional advancement 7 Progressive work environment conducive to personal and professional growth Job Title - Maintenance Officer / Sr. Officer Role & Responsibility Follow the cGMP and GDP Procedure. Develop maintenance procedures and ensure implementation. Carry out inspections of the facilities to identify and resolve issues. Plan and oversee all repair and installation activities. Keep generator, lighting and electrical system in working order. Diagnose problems and then repair/replace defective parts. Preparing all the documents (like SOPs, related log sheets, etc.) related to the maintenance department. Inspecting the validation and calibration activity of the clean room and other equipment as needed. Perform mechanical and electrical maintenance repair work; install/ replace fixtures, switches, motor, receptacles, and wiring. Execute PPM (Planned Preventive Maintenance) of equipment, maintains records and logs as needed. Provides guidance and directions to less experienced personnel and others assigned to his/ her position. Performs all work in accordance with all established regulatory and compliance as per safety requirements. Responsible to source, negotiate and purchase materials from local vendors. Evaluate vendor s quotation to ensure that they are in line with the technical specification required for the project. Any additional job responsibilities as assigned by HOD. Perform other various task as instructed by management. Department : Maintenance Number Of Positions : 01 Experience : 1 to 6yrs Employment Type : Full Time, Permanent Education : UG: B.Tech, BEE (Mechnical / Electrical) Compensation : As per Industry norms & experience Key Skills : PPM, Maintenance Management, SOPs, cGMP and GDP Procedures, Utility Maintenance.