279 Utility Jobs - Page 7

Role & responsibilities Lead and manage the Engineering department with a focus on Process Engineering and Utilities. Plan, design, and implement engineering systems to support sterile and non-sterile pharmaceutical manufacturing. Ensure uninterrupted operation and compliance of all utility systems including HVAC, WFI, clean steam, compressed air, chilled water, and effluent treatment. Develop and implement SOPs for engineering operations, preventive maintenance, and calibration. Ensure compliance with cGMP, GEP, and regulatory requirements for all engineering activities. Lead capital projects including facility upgrades, equipment installation, and utility expansions. Coordinate with QA, Production, and Validation teams for timely execution of qualification and validation activities. Monitor and control energy consumption and implement energy-saving initiatives. Ensure timely execution of preventive and breakdown maintenance for all equipment and utilities. Lead root cause analysis and implement CAPA for engineering-related deviations and failures. Ensure readiness for regulatory inspections and audits by maintaining documentation and compliance. Develop and manage engineering budgets, procurement plans, and vendor management. Lead the recruitment, training, and development of engineering personnel. Ensure safety practices are followed across all engineering operations. Drive continuous improvement initiatives in process efficiency, equipment reliability, and utility performance. Ensure timely review and approval of engineering documents including URS, DQ, IQ, OQ, PQ, and validation protocols. Should have Knowledge on TPM Principless Drive Asset Robustness Program with Energy Efficiency. Coordinate with external agencies for statutory compliance related to utilities and infrastructure. Ensure proper documentation and control of engineering records and drawings. Support technology transfer and scale-up activities from R&D to commercial production. Any other assignment given by higher management. Preferred candidate profile Educational qualification : B.E./Btech or M.E./M.Tech in Mechanical, Electrical, Chemical, or related engineering discipline. Minimum work experience: 15 to 20 years in pharmaceutical manufacturing with strong exposure to sterile operations and utility systems. Skills & attributes: Technical Skills Expertise in utility systems (HVAC, WFI, clean steam, etc.) and process equipment. Experience in project management, equipment qualification, and validation. Knowledge of regulatory requirements (USFDA, EU GMP, WHO, etc.). Familiarity with engineering documentation and QMS systems. Hands-on experience in energy management and automation systems. Behavioural skills Strong leadership and team management capabilities. Excellent problem-solving and decision-making skills. Effective communication and cross-functional collaboration. High attention to detail and commitment to compliance and safety.

Role & responsibilities BER Replacement/High Failure count Oversee the upgrade of outdated designs, ensuring alignment with current industry trends. Develop and execute strategies for the timely BER replacement to maintain standards. Checks on high failure count- Cold-room, Oven, Makeline, DG, ACs etc Store Upgradation Develop and execute plans for the periodic upgrade and modernization of restaurant facilities to enhance the overall customer experience and operational efficiency. Identify and assess the need for replacing outdated/old designs or equipments within the region. Old design replacement for Signage, DMB, Fly catcher Coordinate with Operations, Quality and Project teams to execute store upgrade(IHR), store reimagine projects efficiently Develop a comprehensive plan for the periodic upgrade of store furniture as per requirement, installation of PMS machine in stores. Charging Infrastructure: Evaluate and implement charging infrastructure for electric delivery vehicles and other electric-powered equipment Collaborate with external partners to ensure compliance with local regulations and standards for electric vehicle charging Compliance Monitor and ensure that all restaurants within the region comply with Company Food Safety Norms (NSF Audit) Meeting the customer satisfaction through proper ambience (Mystery Audit- Infra) Scrap Management & Warehouse compliance Proper disposal of equipment and materials from warehouse. Bike Discard. Proper warehouse management. Asset innovation The Regional asset manager should work with external vendors and innovators to bring new assets that are lower on capex or opex or both and helps with better reliability Preferred candidate profile Qualification BE / B. Tech Experience – 6-10 years’ experience in the specialised Engineering FMCG / Retail / Services and Real/Hospitality Industry/ Estate industry.

Experience at following:- Installation of constitutors, Energy Meters, Relay, Limit Switches and other controlling instruments. AC-motors, Diesel Generators, Soft starters, DOL Starters, Star Delta starters, A.C. Drives ,PLC, HVAC System. Required Candidate profile Kindly send resume at capitalhrkolkata@gmail.com Call/Whatsapp at 9073207713

About Company Job Description Roles and Responsibilities: Operation & Maintenance of Electrical installation i.e. 132 KV & 33KV Switchyard(GIS& AIS), HT /L.T. Switchgear, Motors,UPS, VFD, cables, Lighting etc. as per equipment manual /OEM recommendation. Electrical Maintenance of utility equipment’s like Air Compressors, Air Handling Units, Clean Room, Effluent Treatment Plant, Fire alarm system, IBMS and ELV system etc. as per equipment manual /OEM recommendation Ability to speak well in public forums. Knowledge of computer programs; Microsoft Office (Word/Excel), Email, Internet.Develop the down the line team. Developments of indigenous vendor to reduce the cost of spares to reduce the operation and maintenance cost. Qualification and Experience: B.E/B.Tech/Diploma - Electrical with over 4 5 Years of experience.

Hiring for Leading ITES Company In Gurgaon for Customer Support Key Highlights: 1: Graduate/UG with min 1 year experience in customer service 2: Candidate Must Not Have Any Exams in the Next 6 Months 3: 24x7 Shifts 4: 5 Days Working 5: Both Side Cabs 6: Excellent Communication Skills 7: Immediate Joiners Preferred A Customer Support Specialist, also known as a Customer Service Representative, is primarily responsible for handling customer inquiries, resolving issues, and ensuring a positive customer experience. They act as the first point of contact for customers, providing assistance and support via various channels like phone, email, or chat. Daily Walkin @ Outpace Consulting, C-29, Sec 2 Noida (Nearest Metro Noida Sec 15, Exit Gate 3) Landmark : Near Hotel Nirulas Walkin Time : 11 am to 3 Pm Ritika @ 8299619074, Qizra @ 90108 97647, Qasim @ 8056419536 Whatsapp Your CV @ 9721919721 Key Responsibilities: Responding to customer inquiries: Answering questions about products or services, providing information, and offering guidance. Resolving customer issues: Troubleshooting problems, addressing complaints, and finding solutions to customer concerns. Providing support: Helping customers navigate product features, troubleshoot technical difficulties, and make the most of their experience. Managing customer interactions: Maintaining a positive and professional attitude, actively listening to customer needs, and ensuring their satisfaction. Recording and reporting: Documenting customer interactions, tracking issues, and providing feedback to improve customer service processes.

Qualification: BE Instrument Experience: 3 to 8 Years Troubleshooting and maintenance of different instruments, PLC and DCS Required Candidate profile Send CV on sdpbharuch@gmail.com with Subject: Instrument Dahej SDP HR Solution, Sixth Floor, 611, Golden Square, Beside Dmart, Near ABC Circle, Bholav, Bharuch SHARE WITH YOUR FRIENDS NO CHARGES Perks and benefits Transportation from Bharuch Medical Canteen

B.E. - Mechanical / Mechatronics Engineer with 08 to 12 years of work experience of maintenance of plant & machinery in a medium / large engineering company. Have maintenance experience in continuous production line. Able to handle maintenance team. Required Candidate profile Experience in monitoring & ensuring smooth operation of utilities & plant machineries. To plan & execute effective Preventive Maintenance schedule of machines that will increase machine availability. Perks and benefits Negotiable - Depending Upon Candidate & Experience

Experience in handling the RAC, Chiller, Air compressor, Cooling tower, Cold storage room, HVAC system , DG operation, PLC programing, SCADA, Fire system, LT panel & electrical room . Operation & maintenance of all plant utilities & maintenance.

Senior Project Owner (SPO) Utility/Energy Division Job Title: Senior Project Owner (SPO) - Utility & Energy Division Company: ARDEM Data Services Location: Remote Shift: 6:00 PM to 3:00 AM About Us: ARDEM Data Services is part of a US-based global professional services company providing Business Process Automation and Business Process Outsourcing Services. We are seeking experienced Senior Project Owners (SPOs) specializing in Utility & Energy Sector projects. This role requires expertise in utility bill processing, energy data analysis, and workflow development to optimize operational efficiency. Responsibilities and Duties: Project Management: • Manage and oversee multiple utility and energy sector projects concurrently, ensuring timely and budget-friendly execution. • Serve as the main client liaison, ensuring clear communication and alignment on project expectations. • Develop project plans, milestones, and performance metrics to track progress effectively. Team Leadership: • Lead and manage a team of process analysts handling utility data processing. • Assign responsibilities based on expertise, ensuring efficient resource utilization. • Conduct team huddles and performance reviews, providing feedback for improvement. Quality Assurance: • Act as a quality checker, ensuring utility bill data processing meets high accuracy standards. • Implement quality control measures, including Root Cause Analysis (RCA) and Corrective Actions. • Maintain HQC, DQC, and FQC checklists for project tracking and final quality control. Process Improvement: • Analyze utility data processing workflows and recommend efficiency improvements. • Implement automation and best practices for utility billing and energy consumption data. • Keep processing logs, work instructions, and process maps up to date. Workflow Development: • Design and develop workflow processes for utility bill audits and energy data reconciliation. • Create training plans and ensure all team members are proficient in handling utility sector projects. Client Communication: • Communicate effectively in English with utility and energy clients to clarify project requirements. • Provide regular updates on progress, challenges, and resolution strategies. Required Experience, Skills, and Qualifications: • Bachelor's degree (Preferred: BTech- Engineering background only)) • 12 years of utility project management experience, with at least 7+ years in a leadershiprole • Experience handling utility bill processing, energy data analysis, or sustainability reporting • Ability to manage 15-20 projects with teams of 1-5 analysts or a single large project with30-50 analysts • Expertise in utility bill formats, energy consumption analysis, and ESGreporting • Strong understanding of data processing workflows, automation, and regulatory compliance • Proficiency in developing Training Plans, Quality Plans, and Standard Operating Procedures (SOPs) • Experience with Root Cause Analysis (RCA) and Corrective Action Plans (CAPs) • Strong English communication skills, with the ability to present confidently in video calls and client meetings Technical Requirements: • Laptop or Desktop: Windows (i3/i5 or higher, 8GB RAM minimum) • Screen: 14 inches, Full HD (19201080) • Internet Speed: 100 Mbps or higher

JD : GIS Architect Minimum of 15 years on experience in IT industry with minimum 5 years' experience as GIS Architect preferably with Water Utility industry. Relevant Experience and Skills Worked at client site/offshore in at least in 2 GIS implementation projects as GIS Architect Hands on experience on Solution Design and Architecture document for large Enterprise GIS system Capacity Planning for GIS projects Thorough knowledge of end to end business process for asset lifecycle management Must be able to understand business requirement and develop functional and technical design document based on the requirements Knowledge and experience in developing utility specific GIS use cases into GIS application Knowledge and experience in integrating GIS product with EAM product Experience in implementing industry standard data model (UNM) in Utility GIS implementation and modifying the data model for client specific needs Complete knowledge and experience in implementing ESRI ArcGIS product suite (with additional add-ons such as Utility Network Management, 3D Extension, Schematics Extension etc.) J ery good client interacting skills, communication and presentation skillsJ

Hiring for a manufacturing MNC company located in Gujarat. Role: Sr. Engg/AM - Electrical Maintenance Location: Ahmedabad Qualification: Diploma/BE Electrical/Electronics/Mechatronics Experience: 4 to 8 yrs Skill Required: 1. Hands on Experience & good knowledge Equipment maint. Activities & systems in Fabrication & assembly plant. 2. Hands on experience in Maintenance of Laser cutting, Bending, Welding Machines, EOT, compressor & utilities etc. 3. Experience in Maintenance of Painting, Shot blasting/sandblasting & similar process. 4. Knowledge of AMC/Tools /consumables/SAP system etc. 5. Exposure/experience of TPM & CNC programming will be an added advantage. Key Responsibilities: 1.Lead/Support all maintenance related activities of the plant. 2.Plan & execute PM activities of all equipment in the plant either directly or through AMC. 3.Co-ordination with Fabrication/assembly/stores to ensure critical equipment uptime. 4. Ensure adherence of Safety, Industrial relations & statutory requirements through coordination with the Admin team Interested candidates share resume on zalak.rohit@cielhr.com

Role & responsibilities Responsible for operating and monitoring water treatment plant shift operation including water quality generation, system Regeneration and water distribution to plant. Ensure the availability and usage of PPEs Create safety awareness among the employees and shift officers by safety awareness sessions. Improvement activities to be driven in terms of safety aspect. Maintain the Raw water tank level above 80% always by operating the Raw water pumps. Maintain all the water quality within the specified quality parameters. Execute the plant scheduled maintenance and plant check sheets. Responsible for plant operation in the assigned shift as per given SOP. Responsible for specific chemical consumption in the shift. Follow the WI and SOP for proper & timely regeneration activation and mix bed unit. Prepare the shift water analysis report and operation log sheets. Maintain the good work environment by implementing 5S, and maintaining of housekeeping and near miss reporting MS Office / SAP Water treatment plant operation & maintenance experience. Operating & trouble shooting knowledge Pressure Filtration system, UF system, reverse osmosis, Clarifier, Effluent treatment plant and Sewage treatment plant. Knowledge in De mineralized plant regeneration process Preferred candidate profile Experience : 3-5 Years minimum experience & at least 3-4 Years experience in similar role Education: - Bachelor’s Degree/ Diploma Engineer -Mechanical / Chemical

SUMMARY Biotechnology Research Scientist/Research Associate We are in search of a highly motivated and skilled Biotechnology Research Scientist/Research Associate to join our [e.g., R&D, Discovery, Process Development] team. The ideal candidate will be responsible for designing, executing, and analyzing experiments to advance our research projects and contribute to the development of innovative biotechnological solutions. This role demands a strong theoretical background in biotechnology, complemented by robust practical laboratory skills and a passion for scientific inquiry. Key Responsibilities: Experimental Design & Execution: Develop and optimize laboratory protocols and methodologies to ensure accuracy, reproducibility, and efficiency. Troubleshoot experimental issues and develop solutions to overcome technical challenges. Data Analysis & Interpretation: Collect, organize, and analyze complex experimental data using statistical and computational tools. Interpret results, draw meaningful conclusions, and identify patterns or trends. Maintain accurate, detailed, and up-to-date laboratory records and electronic lab notebooks (ELNs). Collaboration & Communication: Collaborate effectively with cross-functional teams to achieve project goals and milestones. Prepare comprehensive technical reports, presentations, and scientific publications to communicate research findings internally and externally. Present research findings at internal meetings, conferences, and seminars. Laboratory Management & Safety: Ensure strict adherence to laboratory safety standards, regulatory guidelines, and quality control protocols. Assist with the maintenance and calibration of laboratory equipment and instrumentation. Manage laboratory supplies and inventory effectively. Continuous Learning & Innovation: Stay abreast of the latest scientific literature, technological advancements, and industry trends in biotechnology. Contribute to the intellectual property of the company by identifying potential applications for novel discoveries and assisting with patent applications. Proactively seek opportunities for skill development and process improvement. Additional responsibilities may include): Lead specific research projects or sub-projects. Mentor and guide junior research staff and technicians. Contribute to the preparation of grant applications and funding proposals. Take a more significant role in strategic planning for research directions. Qualifications: Higher specialized education in Biotechnology, Biochemistry, or related field. For PHD holders, No Work Experience Requirement Experience: Minimum 5 years of experience in scientific publications, or authorship of an invention, utility model, or industrial Requirements Qualifications: Higher Specialized education in Biotechnology, Biochemistry or related field. For PHD holders , No Work Experience Requirement Experience: Minimum 5 years of experience in scientific publications, or authorship of an invention, utility model, or industrial design. Skills: Excellent communication, presentation, and interpersonal skills. Proven track record of develop plans, guidelines, and protocols for conducting research. Conduct Objective evaluations of scientific / technical programs, projects and experimental developments. Organize the collection and analysis of scientific/technical information related to experimental and research work Benefits Competitive salary of US $ 1,000 - $ 1400 per month. ( Based on Skills and Experience / Fresher can also apply ) Visa Support - Cost and renewal covered Health & Wellness: Medical insurance provided Travel and Relocation: Transportation cost and return air fare covered Accommodation: Provided Living Expenses: Employees responsibility

Job Description 1. JOB DETAILS:Position Title:Asst. /Deputy Manager/Manager - Maintenance (Region Utility Manager) Reports to : Regional Head Maintenance Department: Maintenance Division: Support Job Code: -Prepared / Revised on:- 2. JOB PURPOSE: This position is responsible to enhance the overall Utility Efficiency, control the utility cost, drive energy efficiency capex project and Engineering innovation to built cost effective solutions to be deployed under CAPEX for further efficiency improvements. The role will report to the Region Head Maintenance and ensure that reliability engineers of critical clusters of the region are supported to ensure Energy Efficiency & Utility cost control across region. 3. JOB DIMENSIONS: Financial Data & Number of Staff Supervised: Operating Budget /Revenues 4. KEY ACCOUNTABILITIES:DescriptionPerformance IndicatorsUtility cost control Monitor Utility Cost and set control based on Business operations. Review High consumption stores and resolve structurally to control excess consumption. Cross Functional coordination to maintain cost initiatives and consumption control Utility consumption per hour Overall Utility Cost. System operation Ensure timely arrear approvals in Bill pro Get bills onboarded on bill pro for autopayments Set petrol limit as per delivery orders and as per actual bike fleet Ensure discard bikes are not update in petro card Zero Arrear and no power cut Petrol CPD No. of stores > 26 cylinders Set monthly target for LPG in procurebox and give approval on exceeding target judiciously as per business requirement. Ensure all store procure LPG through Procurebox Ensure EMS Schedule as per OLO, optimize schedule of assets as per Business operation. Ensure Zero bypass and no energy wastage in no operation hours. Ensure all store should have EMS Zero Bypass hours Electricity consumption kWh/hour LPG Consumption kg/hour High consumption stores. CAPEX deployment Build capex plan to drive efficiency across stores deploy on high consumption store Ensure deployment of efficiency initiatives UPS, Auto-changeover, VFD panels etc. as per plan. Ensure effectiveness of CAPEX deploy. CAPEX deployed at store level + ROI& Efficiency achieved at store level Innovation Build Ideas to improve efficiency Coordination with New vendors, new assets & IOT vendors to build efficient systems and solution. POC done Scale up identified Stake Holder Management Align CBH on consumption metrics and cost control measures. Coordinate with Partner management for Bill correction and recovery . Coordinate with internal team for implementing controls & capex deployment initiatives. . 5. COMMUNICATIONS & WORKING RELATIONSHIPS:Internal: Operations Project Training Partner management Business finance Sr. Management /Middle Management/Jr. Management External: Vendors Landlords

Hiring for Leading ITES Company In Gurgaon for Customer Support Key Highlights: 1: Graduate/UG with min 1 year experience in customer service 2: Candidate Must Not Have Any Exams in the Next 6 Months 3: Day Shifts 4: 5 Days Working 5: Both Side Cabs 6: Excellent Communication Skills 7: Immediate Joiners Preferred A Customer Support Specialist, also known as a Customer Service Representative, is primarily responsible for handling customer inquiries, resolving issues, and ensuring a positive customer experience. They act as the first point of contact for customers, providing assistance and support via various channels like phone, email, or chat. Daily Walkin @ Outpace Consulting, C-29, Sec 2 Noida (Nearest Metro Noida Sec 15, Exit Gate 3) Landmark : Near Hotel Nirulas Walkin Time : 11 am to 3 Pm Ritika @ 8299619074, Qizra @ 90108 97647, Qasim @ 8056419536, Neha @ 8789203027 Whatsapp Your CV @ 9721919721 Key Responsibilities: Responding to customer inquiries: Answering questions about products or services, providing information, and offering guidance. Resolving customer issues: Troubleshooting problems, addressing complaints, and finding solutions to customer concerns. Providing support: Helping customers navigate product features, troubleshoot technical difficulties, and make the most of their experience. Managing customer interactions: Maintaining a positive and professional attitude, actively listening to customer needs, and ensuring their satisfaction. Recording and reporting: Documenting customer interactions, tracking issues, and providing feedback to improve customer service processes.

Bring relevant experience in Design /BOQ/Project budgeting/Proposal creation for MEP Projects [Electrical/HVAC/Security & Safety systems], Solar Projects, Infra Projects [Light fabrication/Conveyors/Plant infra projects/Ecommerce projects] Required Candidate profile Source and engage Designer/Consultant that align with the client's needs and project specifications.Foster strong relationships with Designer/Consultant to ensure seamless collaboration and delivery.

Hiring for Leading ITES Company In Gurgaon for Customer Support Key Highlights: 1: Graduate/UG with min 1 year experience in customer service 2: Candidate Must Not Have Any Exams in the Next 6 Months 3: Day Shifts 4: 5 Days Working 5: Both Side Cabs 6: Excellent Communication Skills 7: Immediate Joiners Preferred A Customer Support Specialist, also known as a Customer Service Representative, is primarily responsible for handling customer inquiries, resolving issues, and ensuring a positive customer experience. They act as the first point of contact for customers, providing assistance and support via various channels like phone, email, or chat. Daily Walkin @ Outpace Consulting, C-29, Sec 2 Noida (Nearest Metro Noida Sec 15, Exit Gate 3) Landmark : Near Hotel Nirulas Walkin Time : 11 am to 3 Pm Ritika @ 8299619074, Qizra @ 90108 97647, Qasim @ 8056419536, Neha @ 8789203027 Whatsapp Your CV @ 9721919721 Key Responsibilities: Responding to customer inquiries: Answering questions about products or services, providing information, and offering guidance. Resolving customer issues: Troubleshooting problems, addressing complaints, and finding solutions to customer concerns. Providing support: Helping customers navigate product features, troubleshoot technical difficulties, and make the most of their experience. Managing customer interactions: Maintaining a positive and professional attitude, actively listening to customer needs, and ensuring their satisfaction. Recording and reporting: Documenting customer interactions, tracking issues, and providing feedback to improve customer service processes.

Cilicant Private Limited, a leading player in pharma packaging solutions, is committed to building a future-ready smart factory through advanced automation and digital transformation. With a strong focus on efficiency, compliance, and sustainability, we are seeking a dynamic professional to lead our automation profile. If you are interested for this opportunity, please write us at hr@cilicant.com We are looking for an experienced Automation & Maintenance leader to spearhead automation initiatives and drive plant-wide reliability and digital integration. The ideal candidate will have deep expertise in industrial automation technologies such as palletization systems, conveyor belts, vision inspection, Automated Storage & Retrieval Systems (ASRS), and robotics. This is a strategic and hands-on role responsible for ensuring uptime, driving productivity improvements, and enabling the transition to Industry 4.0. Role & responsibilities Automation Project Implementation: Lead end-to-end automation projects (palletization, conveyor belts, vision inspection, ASRS, etc.) to enhance manufacturing efficiency. Drive the adoption of Industry 4.0 and IoT technologies for real-time monitoring and process optimization. Evaluate automation requirements, develop technical specifications, and execute implementation strategies. Collaborate with cross-functional teams (Production, Maintenance, IT, and Engineering) to integrate automation solutions seamlessly. Work with external vendors and solution providers to implement state-of-the-art automation technologies. Ensure adherence to safety, compliance, and operational excellence in all automation initiatives. Shopfloor & Utility Maintenance: Oversee the instrumentation, electronics, and electrical maintenance of all shopfloor and utility equipment. Ensure smooth operation and preventive maintenance of PLCs, VFDs, SCADA systems, embedded systems, and robotic automation. Troubleshoot and resolve technical issues related to control systems, sensors, and automated equipment. Optimize energy efficiency through advanced automation solutions and predictive maintenance techniques. Process Optimization & Continuous Improvement: Identify opportunities for improving efficiency, reliability, and cost-effectiveness in automation and maintenance processes to enhance OEE, reduce energy consumption, and lower maintenance costs. Standardize automation processes and develop SOPs for seamless operation and troubleshooting. Conduct feasibility studies, ROI analysis, and proof-of-concept trials for new automation projects. Provide technical training and skill development programs for the maintenance and operations teams. Stay updated on the latest advancements in automation, robotics, and smart manufacturing technologies. Preferred candidate profile Experience: Around10 years in a manufacturing setup, with 5+ years in a leadership role handling automation + electrical/instrumentation maintenance . Proven track record of executing complex automation projects in pharma/FMCG/auto/engineering sectors. Hands-on experience with: PLCs (Siemens, Allen-Bradley), SCADA, HMI, VFDs Vision inspection systems, robotics, conveyors, ASRS IoT sensors, control panels, and building automation systems Working knowledge of AutoCAD electrical drawings, and project documentation. Strong understanding of electrical safety, compliance , and plant utility systems. Exposure to digitalization platforms , smart energy meters, and WMS/SAP integration is a plus. Strong team leadership, vendor management, and project planning skills.

Perform detailed static analysis using classical Hand calcualtion, on aerostructures, including wings, fuselage, landing gear, Floor beam, Doors and other aircraft components. Utilize Finite Element Analysis (FEA) software, such as HYPERMESH, NASTRAN, PATRAN to model and analyze structural performance under various loading conditions. Ensure compliance with aerospace industry standards, including FAA, EASA, and military regulations, and participate in design reviews. Experience on Airbus and Boeing Aircraft structures is an added advantage. Develop and validate analytical methods using excel and Macros techniques to predict the behavior of structural components. Work closely with design engineers to provide input on material selection, design changes, and manufacturing processes to optimize structural performance and minimize weight while maintaining safety. Lead technical reports and documentation to communicate analysis results, design recommendations, and compliance to regulatory bodies and customers. Preparing the certification standard report with detailed explanations of procedures followed for analyzing a structure to support PDR and CDR. Include all the mitigations and summarize Reserve factor in the report Mentor and provide guidance to junior engineers and analysts. Collaborate with cross-functional teams (materials, design, systems, etc.) to ensure integrated, efficient, and safe structural designs. Identify and address structural performance risks, and provide solutions to improve the overall reliability and performance of aerostructures. Participate in customer-facing discussions and presentations related to structural design and analysis. Conduct optimization studies to enhance structural efficiency, reduce weight, and improve manufacturability of fuselage components. Explore design alternatives to achieve optimal performance Bachelor's, Master's, in Aerospace Engineering, Mechanical Engineering, or a related field. 10+ years of experience in stress analysis and design of aerostructures, preferably in the aerospace industry. In-depth knowledge of structural analysis methods, including finite element modeling (FEM), classical hand calculations, and failure theories. Proficient in FEA tools such as NASTRAN/PATRAN/HM similar software. Strong understanding of aerospace materials, including composites, metals, and advanced alloys. Familiarity with aircraft systems and the integration of structures with other aircraft systems. Solid understanding of aerospace loads and regulatory standards and certifications (e.g., FAA, EASA). Strong problem-solving skills, attention to detail, and ability to manage multiple projects simultaneously. Excellent written and verbal communication skills, including technical report writing and presentations. Ability to work in a fast-paced, multidisciplinary team environment.

Must Have exp of Textile Industry Exp of Steam , Boiler , ETP, STP , ZLD Share resume at hr3.jobjoin@gmail.com, hr.jobjoin@gmail.com What's app at 9779600937, 8872900937

Hiring for Leading ITES Company In Gurgaon for Customer Support Key Highlights: 1: Graduate/UG with min 1 year experience in customer service 2: Candidate Must Not Have Any Exams in the Next 6 Months 3: Day Shifts 4: 5 Days Working 5: Both Side Cabs 6: Excellent Communication Skills 7: Immediate Joiners Preferred A Customer Support Specialist, also known as a Customer Service Representative, is primarily responsible for handling customer inquiries, resolving issues, and ensuring a positive customer experience. They act as the first point of contact for customers, providing assistance and support via various channels like phone, email, or chat. Daily Walkin @ Outpace Consulting, C-29, Sec 2 Noida (Nearest Metro Noida Sec 15, Exit Gate 3) Landmark : Near Hotel Nirulas Walkin Time : 11 am to 3 Pm Ritika @ 8299619074, Qizra @ 90108 97647, Qasim @ 8056419536, Neha @ 8789203027 Whatsapp Your CV @ 9721919721 Key Responsibilities: Responding to customer inquiries: Answering questions about products or services, providing information, and offering guidance. Resolving customer issues: Troubleshooting problems, addressing complaints, and finding solutions to customer concerns. Providing support: Helping customers navigate product features, troubleshoot technical difficulties, and make the most of their experience. Managing customer interactions: Maintaining a positive and professional attitude, actively listening to customer needs, and ensuring their satisfaction. Recording and reporting: Documenting customer interactions, tracking issues, and providing feedback to improve customer service processes.

Roles and Responsibilities Experience in Electrical or Mechanical or Instrumentation or Fitter or Boiler Operator or Engineering Documentation or Civil Perform breakdown maintenance, preventative maintenance, and predictive maintenance tasks to ensure optimal equipment performance. Conduct routine checks on chillers, HVAC systems, boilers, electrical systems, instrumentation, and civil infrastructure to identify potential issues before they become major problems. Troubleshoot and resolve technical issues related to utility operations and plant maintenance. Collaborate with other teams to implement effective solutions for improving overall efficiency and reducing downtime. Ensure compliance with safety protocols and regulations during all aspects of work. Desired Candidate Profile 5-10 years of experience in a similar role within the pharmaceutical industry or manufacturing sector. Diploma in Any Specialization (Mechanical/Electrical/Instrumentation). Strong understanding of breakdown maintenance principles; ability to perform repairs independently. Proficiency in performing predictive maintenance activities using techniques such as condition monitoring.

Walk-in Drive @ Bangalore on 22nd June 2025 (Sunday) Strides Pharma is hosting a Walk-In Drive for multiple roles. Venue: Strides Pharma Science Ltd. (R&D office): 165/2, 3rd Main Road, Oppo. Kalyani Magnum Tech Park, JP Nagar 4th Phase, Bengaluru-560076 Open Positions Department: Production Experience: 2-7 years Qualification: B.Pharm/M.Pharm Job Location: Chennai Key Skills: Granulation, Compression, Coating, Capsule Filling, OSD Production Department: Packing Experience: 2-7 years Qualification: B.Pharm/M.Pharm Job Location: Bangalore Key Skills: OSD Packing, Bottle Packing, Blister Packing, BQS, CVC, BPR Department: Quality Control Experience: 2-7 years Qualification: B.Pharm/M.Pharm/M.Sc. Job Location: Bangalore Key Skills: Analysis of Raw Material, Finished products, In Process, Stability Samples, for Capsules & Tablets with expertise in HPLC. Department: Formulation Development Experience: 4-7 years Qualification: M.Pharm Job Location: Bangalore Key Skills: Planning & Execution of Lab scale experiments. DOE, Quality by Design, Product Development, Stability Protocol, Regulatory Market. Department: Engineering Process Maintenance Experience: 2-7 years Qualification: Diploma/B.Tech. (Electrical, Mechanical, Instrumentation) Job Location: Bangalore Key Skills: Maintenance of RMG, FBD, Compression, Coating, Capsule filling, Blister Packing, Sachet Filling line, Bottle Packing Machines. Department: Engineering Projects & Utility Experience: 2-7 years Qualification: Diploma/B.Tech. (Electrical, Mechanical, Instrumentation) Job Location: Bangalore Key Skills: Installation, Commissioning, Equipment Qualification, DQ, IQ, OQ, PQ, Utility, Water System, HVAC, AHU, Chiller, Air Compressor, Cooling Tower, PLC, SCADA, HMI Best Regards, Talent Acquisition Team, STRIDES PHARMA SCIENCE LTD

Looking for Mechanical Engineering for Valia - API Manufacturing Facility. Must have experience of plant maintenance, Utility operations, AHU, HVAC Aware with GMP guidelines and function related documentation activity.

Role & responsibilities Operation and maintenance of Pre- Treatment, Watersystems, Boilers, Chillers, Cooling Towers and Air Compressors. Handling and Implementation of Electrical Safety Standards. Should be able to handle the QMS activities like Preparation, Review & Revision of SOP. Handling of Change controls Incident investigations and CAPA management. Maintaining all cGMP Standards as per the regulatory requirements. Preparation of URS, Risk assessments, SOPs and PMP task lists. Responsible for Power Fuel budgets maintaining Responsible for handling of Diesel, FO and Briquette stocks maintenance. Should have knowledge on OE Saving projects. Responsible for OPEX reduction and Repair & maintenance Budget control Preferred candidate profile API, OSD, Injectables