279 Utility Jobs - Page 4

Greetings from Kashiv Biosciences!!! We are looking for Utility(MEP) Engineer for our Biosimilar Manufacturing Plant Based out of Ahmedabad. Below are the further details. Experience 15 - 20 Years of Process Equipment Maintenance Education: B.E/ B. Tech( Mechanical/ Electrical/ Electronics/ Instrumentation) Roles and Responsibilities Drive and execute capex project from the inception to electro-mechanical completion and C&Q. Drive the project 100% independently and adhere project policy. Review the project plan and prepare list of deliverables require to complete the design. Float the enquiry to design consultancy firm for new projects. Review and participate in review of concept design layout. Review basic engineering and detailed design drawings of different package (i.e. HVAC, CU, HSE, Civil, Electrical, LVS and BU etc.). Review and prepared BOQ/BOM-related HVAC equipment and system. Prepare the MOM and share post-meeting as applicable. Support and provide support for routine operation and in HVAC, utility, and DS process maintenance. Prepare and propose budget with assumptions/basis for budget Raise CER against approved budget and ensure approvals as applicable. Track the approved capex budget to know the spent status. Prepare and propose budget amendment and seek approvals for additional budget. Prepare, review and get approved change control and other QMS element related to project. HVAC, clean utility, and black utility packages execute and qualify and get area released for routine operations. Well-versed in HVAC design, BMS, EMS, Water system. Well-versed in water systems like Pretreatment, purified water generation, and distribution, WFI generation, and distribution, and Pure steam generators. Compressed air, gas distribution system, IBR boiler, chiller, Chiller Plant Manager, cooling tower, kill tank system, and wet scrubber, etc. Candidate Details The candidate should be from Pharma industry only. The candidate should be aware of GDP/ GMP Process. The candidate should have exposure to equipment qualification, Validation and QMS . The candidate should have good communication skills. Interested candidate please share the resume on my mail id manan.hathi@kashivindia.com Regards HR Team Kashiv Biosciences

Responsible for preventive maintenance of Injection Moulding machines ranging from 150 to 2000T. Maintain all utilities, Maintain critical spare part inventory. Daily break down analysis and MTTR / MTBF analysis. Required Candidate profile BE Electrical / Mechanical with 10 to 15 years experience in Moulding machine maintenance.

Job Title: Project Manager CRM / CIS Location: Ranchi, Jharkhand Experience Required: 6+ Years (Minimum 3+ years in CRM/CIS domain) Employment Type: Full-Time Job Summary: We are looking for an experienced Project Manager with a strong background in Customer Relationship Management (CRM) and Customer Information Systems (CIS) , preferably within the utilities or power sector . The ideal candidate will be responsible for planning, executing, and closing projects while managing cross-functional teams and ensuring timely delivery within scope and budget. Key Responsibilities: Lead end-to-end project management for CRM/CIS implementations or upgrades. Define project scope, goals, timelines, and deliverables in alignment with business objectives. Manage cross-functional project teams, including vendors and stakeholders. Monitor and control project performance using appropriate tools and techniques. Identify and mitigate project risks and issues effectively. Ensure high-quality documentation, reporting, and communication across all project phases. Act as the primary liaison between business users, technical teams, and leadership. Adhere to project governance and compliance requirements. Preferred Candidate Profile: Bachelor's or Masters Degree in Engineering, IT, or a related field. 6+ years of overall experience , with minimum 3+ years in CRM/CIS projects. Proven experience in project management tools (e.g., MS Project, JIRA, Asana). Familiarity with CRM platforms (Oracle CRM, Salesforce, SAP CRM, etc.) or CIS systems in the power and utility domain . Excellent communication, leadership, and stakeholder management skills. PMP/Prince2/Agile certification is a plus. Interested can share your Resume to jayavardhan.n@fluentgrid.com

Hello Candidate, Greetings from Hungry Bird IT Consulting Services Pvt. Ltd.! We're hiring an Architectural Designer for our client, Job Title: Architectural Designer Location: Hyderabad (Secunderabad) Experience: 4-7 Years Notice Period: Immediate to 10 days NOte: 4-7 years of hands-on experience with large-scale industrial projects. Key Responsibilities: Design Development Work closely with clients to develop architectural designs for industrial buildings like factories, warehouses, and production plants. Translate requirements into functional, aesthetic, and cost-effective designs, ensuring compliance with building codes and standards. Technical Drawing & CAD Modelling Use AutoCAD, Revit, SketchUp, and other BIM tools to create detailed design drawings, layouts, and 3D models. Provide detailed specifications for construction materials, HVAC, electrical, plumbing, and structural components. Collaboration & Coordination Collaborate with structural and mechanical engineers to ensure design feasibility. Coordinate between architectural teams and other departments to integrate the design with project schedules and budgets. Regulatory Compliance & Sustainability Ensure all designs comply with local building codes, environmental regulations, and safety standards. Integrate sustainable design practices, including energy efficiency and waste reduction. Construction Support Conduct regular site visits to monitor progress and ensure accurate implementation of the design. Troubleshoot and resolve design-related issues during the construction phase. Requirements: Qualification: B.Arch / M.Arch. 4-7 years of hands-on experience with large-scale industrial projects. Software Proficiency: Expertise in AutoCAD, Revit, SketchUp, and BIM-related tools (e.g., Navisworks). Knowledge: Strong understanding of industrial construction methods, materials, and regulatory standards. Skills: Proven problem-solving abilities and experience leading or mentoring junior staff. (Interested candidates can share their CV to aradhana@hungrybird.in or call on 9959417171) Please furnish the below-mentioned details that would help us expedite the process. PLEASE MENTION THE RELEVANT POSITION IN THE SUBJECT LINE OF THE EMAIL. Example: KRISHNA, ARCHITECTURAL DESIGNER, 5 YEARS, 30 DAYS NOTICE Name: Position applying for: Total experience: Notice period: Current Salary: Expected Salary: Thanks and Regards, Aradhana +91 9959417171

Hiring for Leading ITES Company In Gurgaon for Customer Support Key Highlights: 1: Graduate/UG with min 1 year experience in customer service 2: Candidate Must Not Have Any Exams in the Next 6 Months 3: 24x7 Shifts 4: 5 Days Working 5: Both Side Cabs 6: Excellent Communication Skills 7: Immediate Joiners Preferred A Customer Support Specialist, also known as a Customer Service Representative, is primarily responsible for handling customer inquiries, resolving issues, and ensuring a positive customer experience. They act as the first point of contact for customers, providing assistance and support via various channels like phone, email, or chat. Daily Walkin @ Outpace Consulting, C-29, Sec 2 Noida (Nearest Metro Noida Sec 15, Exit Gate 3) Landmark : Near Hotel Nirulas Walkin Time : 11 am to 3 Pm Ritika @ 8299619074, Qizra @ 90108 97647, Qasim @ 8056419536 Whatsapp Your CV @ 9721919721 Key Responsibilities: Responding to customer inquiries: Answering questions about products or services, providing information, and offering guidance. Resolving customer issues: Troubleshooting problems, addressing complaints, and finding solutions to customer concerns. Providing support: Helping customers navigate product features, troubleshoot technical difficulties, and make the most of their experience. Managing customer interactions: Maintaining a positive and professional attitude, actively listening to customer needs, and ensuring their satisfaction. Recording and reporting: Documenting customer interactions, tracking issues, and providing feedback to improve customer service processes.

Role & responsibilities Role & Responsibilities : Preventive & Breakdown Maintenance : Ensure timely preventive maintenance of shape molding machines, pre-expanders, compressors, boilers, and utility systems. Minimize equipment downtime through efficient breakdown analysis and corrective action. Machine Operation & Efficiency : Monitor and maintain smooth functioning of thermocol shape molding machines Optimize machine performance to reduce cycle time, energy consumption, and raw material wastage. Utility Maintenance : Maintain compressors, chillers, ETP/STP, cooling towers, and electrical panels. Monitor power load and energy consumption; implement energy-saving initiatives. Spare Management : Maintain minimum stock levels of critical spares. Plan and coordinate with the purchase team for timely procurement. Documentation & Compliance : Maintain maintenance logs, equipment history, and calibration records. Ensure compliance with statutory safety and environmental norms (e.g., boiler inspection, pollution control board). Team Handling : Lead a team of technicians and contractors for day-to-day activities. Conduct skill enhancement training for maintenance personnel. New Projects & Installations : Support new machinery installation, trial runs, and commissioning. Coordinate with OEMs for technical support and upgrades. Coordination : Liaise with production, quality, and safety departments for smooth plant operations. Preferred candidate profile Qualification : Diploma / B.E. / B.Tech Mechanical / Electrical Engineering Experience : 10 to 16 years in Maintenance Industry : Any Manufacturing / Plastic/ EPS / EPP / Plastic Injection Molding / Packaging Skills Required : Strong technical knowledge in shape molding machinery, utilities, and hydraulics/pneumatics Hands-on experience in preventive maintenance systems Troubleshooting and root cause analysis (RCA) Leadership skills and team management Knowledge of ISO & statutory compliance

Cilicant Private Limited, a leading player in pharma packaging solutions, is committed to building a future-ready smart factory through advanced automation and digital transformation. With a strong focus on efficiency, compliance, and sustainability, we are seeking a dynamic professional to lead our automation profile. If you are interested for this opportunity, please write us at hr@cilicant.com We are looking for an experienced Automation & Maintenance leader to spearhead automation initiatives and drive plant-wide reliability and digital integration. The ideal candidate will have deep expertise in industrial automation technologies such as palletization systems, conveyor belts, vision inspection, Automated Storage & Retrieval Systems (ASRS), and robotics. This is a strategic and hands-on role responsible for ensuring uptime, driving productivity improvements, and enabling the transition to Industry 4.0. Role & responsibilities Automation Project Implementation: Lead end-to-end automation projects (palletization, conveyor belts, vision inspection, ASRS, etc.) to enhance manufacturing efficiency. Drive the adoption of Industry 4.0 and IoT technologies for real-time monitoring and process optimization. Evaluate automation requirements, develop technical specifications, and execute implementation strategies. Collaborate with cross-functional teams (Production, Maintenance, IT, and Engineering) to integrate automation solutions seamlessly. Work with external vendors and solution providers to implement state-of-the-art automation technologies. Ensure adherence to safety, compliance, and operational excellence in all automation initiatives. Shopfloor & Utility Maintenance: Oversee the instrumentation, electronics, and electrical maintenance of all shopfloor and utility equipment. Ensure smooth operation and preventive maintenance of PLCs, VFDs, SCADA systems, embedded systems, and robotic automation. Troubleshoot and resolve technical issues related to control systems, sensors, and automated equipment. Optimize energy efficiency through advanced automation solutions and predictive maintenance techniques. Process Optimization & Continuous Improvement: Identify opportunities for improving efficiency, reliability, and cost-effectiveness in automation and maintenance processes to enhance OEE, reduce energy consumption, and lower maintenance costs. Standardize automation processes and develop SOPs for seamless operation and troubleshooting. Conduct feasibility studies, ROI analysis, and proof-of-concept trials for new automation projects. Provide technical training and skill development programs for the maintenance and operations teams. Stay updated on the latest advancements in automation, robotics, and smart manufacturing technologies. Preferred candidate profile Experience: Around10 years in a manufacturing setup, with 5+ years in a leadership role handling automation + electrical/instrumentation maintenance. Proven track record of executing complex automation projects in pharma/FMCG/auto/engineering sectors. Hands-on experience with: PLCs (Siemens, Allen-Bradley), SCADA, HMI, VFDs Vision inspection systems, robotics, conveyors, ASRS IoT sensors, control panels, and building automation systems Working knowledge of AutoCAD electrical drawings, and project documentation. Strong understanding of electrical safety, compliance, and plant utility systems. Exposure to digitalization platforms, smart energy meters, and WMS/SAP integration is a plus. Strong team leadership, vendor management, and project planning skills.

Roles and Responsibilities Perform electrical maintenance on equipment such as MIG, TIG, SPM, CNC BENDER, Press Machines, Robots, Utility Equipment, and Utility. Conduct breakdown analysis to identify root causes of issues and implement corrective actions. Manage spare parts inventory and procurement process for efficient utilization. Provide on-the-job training to junior engineers to enhance their skills. Ensure effective communication with all stakeholders regarding maintenance activities. Desired Candidate Profile Strong knowledge of PLC programming languages like Mitsubishi Q Series & FX Series. Proficiency in handling various types of machinery including MIG welding machines.

Hiring for Leading ITES Company In Gurgaon for Customer Support Key Highlights: 1: Graduate/UG with min 1 year experience in customer service 2: Candidate Must Not Have Any Exams in the Next 6 Months 3: 24x7 Shifts 4: 5 Days Working 5: Both Side Cabs 6: Excellent Communication Skills 7: Immediate Joiners Preferred A Customer Support Specialist, also known as a Customer Service Representative, is primarily responsible for handling customer inquiries, resolving issues, and ensuring a positive customer experience. They act as the first point of contact for customers, providing assistance and support via various channels like phone, email, or chat. Daily Walkin @ Outpace Consulting, C-29, Sec 2 Noida (Nearest Metro Noida Sec 15, Exit Gate 3) Landmark : Near Hotel Nirulas Walkin Time : 11 am to 3 Pm Ritika @ 8299619074, Qizra @ 90108 97647, Qasim @ 8056419536 Whatsapp Your CV @ 9721919721 Key Responsibilities: Responding to customer inquiries: Answering questions about products or services, providing information, and offering guidance. Resolving customer issues: Troubleshooting problems, addressing complaints, and finding solutions to customer concerns. Providing support: Helping customers navigate product features, troubleshoot technical difficulties, and make the most of their experience. Managing customer interactions: Maintaining a positive and professional attitude, actively listening to customer needs, and ensuring their satisfaction. Recording and reporting: Documenting customer interactions, tracking issues, and providing feedback to improve customer service processes.

Hand on maintenance experience on Press shop, Robotic welding, Utility, Pneumatics & Hydraulics maintenance experience. Knowledge of MTTR & MTBF. Shift handling. Required Candidate profile DEE / DME / BE Mechanical / BE Electrical with 1 to 4 years experience in Auto component Industry.

Role & responsibilities To lead and manage utility systems in a sterile injectable manufacturing facility. The candidate should have strong experience in pharmaceutical utility operations, maintenance, and regulatory compliance Oversee the operation and maintenance of all utility systems HVAC, compressed air, purified water, WFI, clean steam, chillers, boilers, etc. Ensure 24x7 availability of utilities for uninterrupted manufacturing. Plan and implement preventive and breakdown maintenance schedules . Ensure all utility operations comply with cGMP, USFDA, and other regulatory standards . Lead utility qualifications (IQ/OQ/PQ) and support audits and inspections. Coordinate with engineering, production, and QA/QC for smooth plant operations. Manage energy efficiency, safety, and sustainability initiatives. Guide and train the utility team for skill development and compliance Preferred candidate profile Bachelors / Masters degree in Mechanical/Electrical Engineering, or related field. 12–20 years of experience in utility operations within pharmaceutical (injectable/sterile) manufacturing. In-depth knowledge of pharma utility systems and regulatory requirements Experience with GMP documentation , equipment qualification, and audit handling Familiar with regulatory standards (USFDA, EU GMP, etc.) Good communication and documentation skills Perks and benefits

Knowledge of Electrical Circuit. Knowledge of Hydraulic Circuit Utility Maintenance (Air Compressor, DG Sets, Transformer) Knowledge of PLC Programming Alll type audit documents (VSA, ISO, IATF) BLOW Moulding & Injection Moulding Required Candidate profile Know about BLOW Moulding & Injection Moulding Maintenance

Job Title: Project Manager Plant Setup Location: Maharashtra / Punjab / Uttar Pradesh / Gujarat / Karnataka / Andhra Pradesh (Multiple Openings) Industry: Beverage Manufacturing Experience Required: 10+ years (with proven experience in Greenfield/Brownfield plant setup projects) Employment Type: Full-Time (Contractual) Feel free to reach at 8447700751 or email your resume at sidkumar@flexymanagers.com Role Overview: We are seeking a highly experienced Project Manager to lead end-to-end plant and infrastructure projects across multiple manufacturing sites. The ideal candidate will have a strong background in factory/plant design, project execution, and commissioning, particularly in the beverage or FMCG industry. This role involves overseeing Greenfield and Brownfield projects , collaborating with cross-functional teams, ensuring timely execution, and upholding the highest standards of quality, safety, and efficiency. Key Responsibilities: End-to-End Project Management: Plan, develop, and execute comprehensive project plans for new plant setups or expansions, from conceptualization through commissioning. Factory & Site Master Planning: Collaborate with regional and corporate teams to design factory layouts and site master plans that align with business goals and production requirements. Greenfield & Brownfield Execution: Lead the construction, expansion, and modernization of manufacturing facilities, including infrastructure, utilities, production lines , and support services. Technology & Efficiency: Identify and recommend technologies, automation opportunities, and energy-efficient solutions to drive productivity and sustainability. Budgeting & Cost Management: Prepare project budgets, monitor capital expenditures, and ensure cost-effective execution without compromising quality or timelines. Vendor & Stakeholder Coordination: Manage contractors, suppliers, consultants, and internal stakeholders to ensure project milestones are achieved as per agreed schedules. Quality, Safety & Compliance: Ensure all projects comply with regulatory requirements, internal standards, and food safety norms specific to beverage manufacturing. Team Leadership & Capability Building: Build and develop a high-performing engineering and technical team; provide training on new technologies and systems. Continuous Improvement: Monitor performance metrics and suggest improvements in project execution and engineering services. Qualifications: Bachelor's or Master's Degree in Engineering (Mechanical, Electrical, Civil, or related field) Minimum 10 years of project management experience, preferably in the beverage, FMCG, or food processing industry Proven experience in leading Greenfield/Brownfield factory setups Strong knowledge of plant engineering, utilities, automation, and project lifecycle management Experience working with cross-functional teams, contractors, and regulatory bodies Excellent leadership, communication, and problem-solving skills Ability to travel and manage projects across multiple locations

Knowledge Hydraulic System, hydraulic items, Casting line maintenance, centrifugal pump, DG, Compressor, Pump House Maint. about limit, tolerance as per standard.Troubleshooting of CNC Lathe, Fanuc based, casting m/c, Induction furnaces, Auto CAD.

We are looking for a skilled Maintenance Executive with an ITI in Electrical and 3–5 years of experience in industrial or kitchen equipment maintenance. The position is based out of our Bhiwandi base kitchen.

Hiring for Leading ITES Company In Gurgaon for Customer Support Key Highlights: 1: Graduate/UG with min 1 year experience in customer service 2: Candidate Must Not Have Any Exams in the Next 6 Months 3: 24x7 Shifts 4: 5 Days Working 5: Both Side Cabs 6: Excellent Communication Skills 7: Immediate Joiners Preferred A Customer Support Specialist, also known as a Customer Service Representative, is primarily responsible for handling customer inquiries, resolving issues, and ensuring a positive customer experience. They act as the first point of contact for customers, providing assistance and support via various channels like phone, email, or chat. Daily Walkin @ Outpace Consulting, C-29, Sec 2 Noida (Nearest Metro Noida Sec 15, Exit Gate 3) Landmark : Near Hotel Nirulas Walkin Time : 11 am to 3 Pm Ritika @ 8299619074, Qizra @ 90108 97647, Qasim @ 8056419536 Whatsapp Your CV @ 9721919721 Key Responsibilities: Responding to customer inquiries: Answering questions about products or services, providing information, and offering guidance. Resolving customer issues: Troubleshooting problems, addressing complaints, and finding solutions to customer concerns. Providing support: Helping customers navigate product features, troubleshoot technical difficulties, and make the most of their experience. Managing customer interactions: Maintaining a positive and professional attitude, actively listening to customer needs, and ensuring their satisfaction. Recording and reporting: Documenting customer interactions, tracking issues, and providing feedback to improve customer service processes.

Knowledge circuit of Electrical, Pnuematic, Hydraulic & Electronics / Electromechanical, Depth of Presses, Weld Shop, MDB, SDB, Utility ,Paint Shop, PT Line, ETP, STP ,PLC Controlled , Exposure in Presses, Weld, Utility, Conveyors & Paint Shop Required Candidate profile Candidated should have Managerial Capability to Handle Maintenance Deptt as Maintenance Head.Have experience in Sheet Metal Automotive Sector or Fabricated Agriculture Implements Manufacturing,

Role & responsibilities - Ideal Candidate has thorough knowledge in Operations and Maintenance of Thermic Fluid Heater Boilers, RO plant. This is an absolute requirement for this position. - Maintaining & improving Project Profitability - Maintaining Safe environment at site - To extend business to existing contract with potential assessment - Maintain contractual performance KPI's, Maintaining safety & legal compliance as per company policy - Train reporting personnel in Safe Operations and Maintenance of Customer Plant Preferred candidate profile knowledge in Operations and Maintenance of Thermic Fluid Heater Boilers to be must Perks and benefits

Role & responsibilities We have 3 position 1) Mechanical Maintenance 2) electrical / Utility maintenance 3) Electronics Maintenance BE with 5-8 yrs experience Diploma - with 8- 12 yrs. experience Keep machine good running and solve/ fix the machine problem to daily support production. To attend CNC machines all types of breakdowns, inhouse repairs of FANUC System cards, Control General problem analysis with electrical / mechanical knowledge, and report the machine problem to engineer/ team leader. Related tasks implemented on time and with high efficiency and effectiveness. Maintain preventive maintenance system and supervision on implementation. Define preventive maintenance plan/tasks for team, and report the TPM result. Create TPM maintenance working instruction for each equipment. Approve the tools/ fixtures Provide support and guidance to technician during maintenance. Typical equipment fault analysis and solution, problem shooting with hydraulic, Program Logic Controller (PLC), Numeric Control (NC) know-how. Cooperate with maintenance technicians in diagnosing root causes of breakdowns and stoppages. Analyze breakdowns to eliminate reoccurrence. Key Personal Competencies- Innovation & Initiative Implementation & Result Orientation Learning Agility & Adaptation. Collaboration & Teamwork. Analytical Thinking & Problem Solving Preferred candidate profile Bachelors degree with major in Electrical or Mechanical Engineering. Having 4-9 yrs. experience in Electrical maintenance, individually can handle the activity. Good English written & verbal communication. Good knowledge of electrics, pneumatic, mechanics in maintenance. Safety awareness and knowledge on identify/eliminate machines safety risk Risk based thinking ability. Maintenance skill training to technician Manage and optimize spare part management. Technical documents understanding. Project Management and Team Management Perks and benefits Best in the industry.

Role & responsibilities Interview Location - Hubbli Karnataka (12&13 July) No Virtual interview will happen Commissioning and testing experience of Transformers and HT/LT motors Knowledge on UPS/DC charger system Equipment and Plant structure/Buildings earth pit system. 33KV, 6.6KV Board, VCB and ACB maintenance HVAC systems maintenance Electrical schematic drawings review Switch board ACO logic checking Plant lighting system maintenance Substation equipment Condition monitoring Knowledge on Batteries of UPS and DC charges Knowledge on protection relays Well versed with safety procedures related to work permit system and LOTO procedure to ensure all jobs get executed safely. Ensure adherence to Preventive, predictive and condition based monitoring schedules of all equipment Shall have background of implementation/documentation of ISO 9001, ISO14001, OHSAS and has an experience of facing IMS audits Shall have objective to achieve Industry Good maintenance practices, WCM standards Awareness of statutory compliances related electrical equipment Should work inline, to achieve targeted maintenance KPIs Equipment healthiness monitoring and reporting

Responsibilities: Monitor equipment performance and troubleshoot issues. Maintain utility systems and HVAC equipment. Follow safety procedures at all times. Collaborate with maintenance team on projects.

Hiring for Leading ITES Company In Gurgaon for Customer Support Key Highlights: 1: Graduate/UG with min 1 year experience in customer service 2: Candidate Must Not Have Any Exams in the Next 6 Months 3: 24x7 Shifts 4: 5 Days Working 5: Both Side Cabs 6: Excellent Communication Skills 7: Immediate Joiners Preferred A Customer Support Specialist, also known as a Customer Service Representative, is primarily responsible for handling customer inquiries, resolving issues, and ensuring a positive customer experience. They act as the first point of contact for customers, providing assistance and support via various channels like phone, email, or chat. Daily Walkin @ Outpace Consulting, C-29, Sec 2 Noida (Nearest Metro Noida Sec 15, Exit Gate 3) Landmark : Near Hotel Nirulas Walkin Time : 11 am to 3 Pm Ritika @ 8299619074, Qizra @ 90108 97647, Qasim @ 8056419536 Whatsapp Your CV @ 9721919721 Key Responsibilities: Responding to customer inquiries: Answering questions about products or services, providing information, and offering guidance. Resolving customer issues: Troubleshooting problems, addressing complaints, and finding solutions to customer concerns. Providing support: Helping customers navigate product features, troubleshoot technical difficulties, and make the most of their experience. Managing customer interactions: Maintaining a positive and professional attitude, actively listening to customer needs, and ensuring their satisfaction. Recording and reporting: Documenting customer interactions, tracking issues, and providing feedback to improve customer service processes.

Job Summary As a Civil SME within the Engineering division with efficiently you will be a leading expert in the Civil Engineering domain and responsible for the recruitment, training, implementation, and client engagement of Civil Engineers. Along with this you also need to perform the following tasks. Recruitment, Training, implementation, and client engagement Identifying and recruiting top-tier resources specializing in Civil Engineering with expertise in Civil 3D applications, ensuring a seamless fit with business requirements and project needs. Providing comprehensive training during the onboarding period and ongoing skill development for resources aligned with clients in the Civil Engineering domain. Collaborating with the sales/CSM team to recommend well-suited candidates for Civil Engineering projects, conducting mock interviews to prepare them for client interactions. Demonstrated proficiency in utilizing Civil 3D, and AutoCAD, and expertise in the application of civil engineering codes, standards practices, and a good understanding of BIM processes. Extensive knowledge of Civil 3D processes and workflows, with experience in utilizing supplementary tools such as Bluebeam, BIM 360, and Navisworks. Facilitating effective communication and coordination between the CSM team, placed Civil 3D specialists, clients, and other stakeholders at various stages of project development, showcasing strong communication skills and a commitment to a customer-focused approach. Review and correction During escalation periods, meticulously review client-provided data to ensure that placed candidates adhere to project requirements and deliver high-quality results. Engage proactively with newly placed candidates, conducting frequent interactions to assess their work, verify alignment with client expectations, and promptly address any issues that may arise. Thoroughly review and implement corrections, comments, and feedback received in markup or any other format during escalation periods, ensuring accurate and precise updates to models or drawings. On a case-by-case basis, conduct comprehensive reviews of models, drawings, specifications, and other engineering data to validate their alignment with the respective project phase, maintaining a commitment to project integrity and quality assurance. Coordination and Documentation Collaborate closely with placed candidates, the Customer Success Management (CSM) team, and the client or clients team to ensure timely project delivery and meet project deadlines effectively. Demonstrate adaptability by providing support to placed candidates on multidisciplinary projects, irrespective of project size or service complexity, contributing to a versatile and well-rounded skill set. Exhibit strong communication skills, both written and oral, fostering effective collaboration and information exchange among project stakeholders. Showcase proficiency in working with BIM360/ACC, leveraging this experience to enhance project coordination and management. Demonstrate capability in supporting placed candidates to organize and maintain all revisions of project drawings, plot files, and project-related information systematically, promoting a logical and well-structured approach to project documentation. Key Responsibilities The candidate should be able to perform the following tasks. Responsible for Training the candidates on AutoCAD, and Civil 3D, developing the workflow between all the departments, and supporting them with BIM/Engineering product-specific domain knowledge. Led the production of improvement plans and exhibit drawings using both AutoCAD and Civil 3D, working collaboratively under the direction of a Licensed Civil Engineer. Responsible for imparting knowledge of actual execution and training on Civil systems that are considered industry standards. Build a support model with the recruiting team through screening, interacting, and testing their product knowledge as per the clients needs by implementing BIM/Engineering expertise. Support the learning and development team with BIM/Engineering expertise and in-house hands-on models to suit the clients requirements. The ideal candidate should provide extensive training in AutoCAD, and Civil 3D. Conduct orientation sessions and arrange on-the-job training for new hires. Be tech-savvy, self-learning, and stay updated with the latest BIM trends/Codes and Standards (Codes and Standards are preferably from the USA region). Work closely with the candidates and training on Civil systems, understand the available products for BIM Engineering, and provide support and enablement to the sales team on client-specific requirements. Establish processes with Customer Success Operations to help drive and collaborate on the Feature Request process. Build and establish relationships with Peer and Product teams to ensure alignment and success. Provide internal support for advanced workflow conversations and work closely with Customer Success and sales team on meeting preparation to provide support/mentorship on customer-facing calls if necessary. Be able to work effectively from a home office. Should guide placed candidates to achieve the delivery deadlines with quality. Should address placed candidate queries on time. Qualifications Assoc. bachelors or masters degree in civil engineering. Minimum 8+ years of experience (not freelance) in Civil services design, drafting, modeling, and coordination. Previous experience in recruitment, training, and development initiatives. Proficient in AutoCAD, Civil 3D, and using BIM360/ACC. Working knowledge of Microsoft Office, Adobe, and Windows OS 10. Ability to work with a team and/or independently with multi-tasking skills. Ability to interpret advanced construction documents/construction drawings. Ability to produce 3D information models and construction drawings. Desirable skills and experience Experience working on USA projects and developing real, workable solutions with a foundation of innovation. Overall, a minimum of 6+ Years of Civil 3D experience with good modeling, coordination, and drafting skills. Knowledge of Land Development services Codes and standards. Solid expertise in detailing and drafting Land Development or Civil services following standards. Strong collaboration and communication skills. Ability to work in a team environment. Ability to manage multiple tasks simultaneously.

Role & responsibilities Will be responsible for handling HVAC , water treatment plant, compressed air, handling of bolier /chiller/air compressor & ETP and pharmaceutical machinery, repairs and maintenance. Handling BMS systems, handling PLCs and DQ, IQ and PQ. Keeping equipment operational by coordinating maintenance and repair services, following manufacturer's instructions and established procedures, requesting special services. Will be involved in handling all pharmaceutical machinery. Responsible for confirming system and product capabilities by designing feasibility and testing methods, testing finished product and system capabilities; confirming fabrication ,assembly, and installation processes. Responsible for keeping equipment operational by coordinating maintenance and repair services; Maintain product and company reputation by complying with government regulations Develop processes by designing and modifying equipment as per the requirement and making sure the project is completed by training and guding technicians. Prepare reports by collecting, analizing and summarizing information and trends. Provide engineering information by answering questions and request. Maintain system and process data base by writing computer program and entering data Handle Autocad, Microsoft word , Power point & Excel Responsible for Attending educational workshop; reviewing professional publications; establishing personal network; participating in professional socities. Prepare road map would be heading the engineering department. Responsible for any other assignment allocated by the department head.

Role & responsibilities To attend the breakdown of all production and Utility machines and maintain the record. To ensure and provide technical trainings to the team. To carry out the Preventive Maintenance as per schedule and make necessary entries of Preventive maintenance in SAP (PM Module) To ensure calibration activities on timely. To initiate Opex budget and improvement projects at site. To allocate the workman/Technician as per requirement. To arrange necessary spares required before and after the preventive maintenance of machines. To maintain inventory of Plant machines. Ensure Data integrity/GDP/GMP visibility at work place. To work in hand for implementation of new projects / Modification of system in plant and supervise civil related works. To Prepare /Update & implement existing SOP, New SOPs and maintain compliance. To attend audits like internal inspection, CQ Regulatory audit and other regulatory audit and ensure compliance to the observations. Preferred candidate profile B.E/B.Tech in Electrical/Mech/Instrumentation having minimum 3-6 yrs experience in OSD Plant , knowledge of QMS and ready to relocate to Jammu will be preferred.