311 Ut Jobs - Page 3

Performing, Interpretation and Evaluation of NDE methods like PT, MT, UT and RT as per ASME Section V, ASME Section I or VIII Preparation of NDE reports, technique sheets and other documentation Development of new NDE techniques Procedure preparation as per ASME Code/Customer specification and getting approval of the same from Customer Day to day NDE planning, Job allocation to NDE personnel and long term resource planning of NDE department Cost estimation of NDE for project enquiries Maintaining Calibration of NDE instruments Co-ordination with other departments, contractors and TPIs/Customers. Maintaining documentation of Personnel Qualification as per SNT-TC-1A. Note: Preference will be g...

Austin Alloy Cast is looking for NDT Inspector to join our dynamic team and embark on a rewarding career journey Collaborate with cross-functional teams to achieve strategic outcomes Apply subject expertise to support operations, planning, and decision-making Utilize tools, analytics, or platforms relevant to the job domain Ensure compliance with policies while improving efficiency and outcomes Disclaimer: This job description has been sourced from a public domain and may have been modified by Naukri.com to improve clarity for our users. We encourage job seekers to verify all details directly with the employer via their official channels before

Austin Alloy Cast is looking for QC Inspector to join our dynamic team and embark on a rewarding career journey Collaborate with cross-functional teams to achieve strategic outcomes Apply subject expertise to support operations, planning, and decision-making Utilize tools, analytics, or platforms relevant to the job domain Ensure compliance with policies while improving efficiency and outcomes Disclaimer: This job description has been sourced from a public domain and may have been modified by Naukri.com to improve clarity for our users. We encourage job seekers to verify all details directly with the employer via their official channels before

Is responsible for execution of jobs as per the specifications and QE requirements on the shop floor.Must have knowledge of fabrication techniques, welding techniques and exposure to a fabrication shop Is responsible for implementation of QC process.

Purpose - A Level 3 NDT Technician in the open forging industry is responsible for developing, implementing, and overseeing non-destructive testing (NDT) procedures, techniques, and standards within a forging facility. This role involves a high level of technical expertise, including the ability to interpret codes and standards, train Level I and II technicians, and collaborate with engineers and quality assurance teams Responsibilities - 1) Procedure Development: Develop and implement NDT procedures, techniques, and methodologies to meet forging industry standards and its customer requirements. 2) Training and Supervision: Train and mentor Level, I and II NDT technicians, ensuring they meet...

Role: NDT Inspector Job Location: Chennai Mode of work: WFO Experience: 3-8 Years Required skills: Bachelor's in Engineering in any of the following disciplines - Mechanical / Manufacturing / Production / Industrial/Electrical Or any other Equivalent engineering degree. Minimum 1 year of hands-on experience in NDT (UT and VT) for Level 2 certified - ASNT / PCN / Equivalent Required good experience on Wind Blades manufacturing process Ability to setup & use NDT (UT) equipment's and relevant analysis software Perform Hand & Machine UT Scan Proficient in Microsoft Office for reporting day to day developments Ability to work under pressure & get things done with quality Ability in being a good t...

Quality assurance

Welding Engineer | ASME-U-Stamp HLE Glascoat Limited is a leading manufacturer of process equipment for the chemical and pharmaceutical industries. We are market leaders in Filtration and Drying Equipment and are a leading manufacturer of Glass Lined Equipment globally. We manufacture a wide range of chemical processing equipment in an equally wide range of materials for some of the most demanding applications. We are introducing new products in the market to cater same set of customers. Department : Quality Assurance Team Size : 4 to 8 Individuals Location : Maroli, Surat Responsibility : - Preparation of new PQR and WPS in line to job requirements with respect to ASME and U-stamp codes Sec...

Job Description Role Overview: You will be responsible for performing LPT, MPT, and UT testing as a Technician. Key Responsibilities: - Conduct Liquid Penetrant Testing (LPT) on various components - Perform Magnetic Particle Testing (MPT) as per specifications - Carry out Ultrasonic Testing (UT) procedures accurately - Document and report test results in a detailed manner - Ensure compliance with safety regulations and procedures Qualifications Required: - Certification in LPT, MPT, and UT testing techniques - Previous experience in NDT (Non-Destructive Testing) methods - Ability to interpret test results accurately - Strong attention to detail and quality standards (Note: No additional deta...

Is responsible for ensuring all forged components, raw materials, outsourced processes supplied to the organization meet defined metallurgical, dimensional, and performance standards for heavy-duty applications.

Location - Saudi Arabia QM Qualified inspector - 01,02 ,07,30,31,35,36 NDE - MT,PT,RT & UT L 2 Valves (QM07) & Line Pipes (QM05).

Job Description Position Expectation: Experience in unit and Integration coverage testing. Should have very good hands of experience in using language C/C++/Model Experience in using SW testing tools, Vector CAST, LDRA, CANTATA++ MIL & SIL testing experience is a must have skill. Good in testing concepts and test techniques Exposure to ISO26262 & A-SPICE compliance for SWE4 & SWE5 Experience in Automotive ADAS domain knowledge will be an advantage, Roles and Responsibilities Job Description Position Expectation: Experience in unit and Integration coverage testing. Should have very good hands of experience in using language C/C++/Model Experience in using SW testing tools, Vector CAST, LDRA, ...

Applicant should be Diploma / Graduate in Mechanical Engineering, with min 4years experience in Quality Control and inspection of Casting and Forging components. Should have knowledge of Casting process and Forging process. Should have hands on experience in inspection of Castings like UT & MPI inspection. Should have hands on experience in dimension inspection of Castings and checking of machining allowance. Should have knowledge of ASME Sec 9 , WPS and PQR. Should be Qualified in ASNT level II certification in NDT techniques - VT , UT , MT, RT and PT . Should have experience in Preparation of QAP, MPP and Inspection checklist. Should be an internal auditor in ISO 9001. preferable. Should b...

Review customer drawings, specifications, and Quality Assurance Plans (QAPs) to identify inspection requirements, tolerances, and acceptance criteria. Capture and document key requirements such as inspection checkpoints, hold points, and special characteristics. Verify that all required documents WPS, PQR, WPQ, and Material Test Certificates (MTCs)are approved and available prior to fabrication Ensure drawing revisions, standards (AWS / ASME / ISO), and customer-specific inspection plans and Inspection & Test Plans(ITPs) Support preparation, review, and updating of ITPs and Process Flow Diagrams (PFDs). Support the Quality Engineer in identifying Product and Process Characteristics (Critical...

QA/QC- T&D

You would be working towards the betterment and growth of the team as a Site Engineer for a gas distribution network project in Bathinda, Punjab. Your main responsibilities will include: - Supervising construction of steel pipelines with cathodic protection, pre-commissioning, and commissioning activities - Overseeing PE pipeline laying and PNG installations with pre-commissioning and commissioning activities - Managing LNG facility installation including mechanical, civil, electrical, and instrumentation work with pre-commissioning and commissioning activities - Supervising CNG facility installation involving mechanical, civil, electrical, and instrumentation work with pre-commissioning and...

Intertek is seeking an experienced NDT Inspector . This role involves conducting non-destructive testing on materials and structures to ensure compliance with specifications and quality standards. Key Responsibilities: Perform non destructive examinations (NDE) to evaluate materials and components for defects Interpret and evaluate test results, preparing detailed reports on findings Collaborate with engineering teams to provide input on quality assurance practices Ensure that all inspections are performed in accordance with project procedures and international standards Maintain accurate records and documentation of inspections and findings Requirements Minimum 5 years experience in NDT ins...

You will be part of an Agile-Scrum software development team for Platform-Amplifier DSP and will contribute to sprint backlog development aligned with the amplifier roadmap. Proven experience in the development and integration of embedded software and/or DSP algorithms in automotive or equivalent environments. As a Manager, you should possess comprehensive knowledge of software development principles and practices, with the ability to develop and present technical data, resolve internal and external conflicts, negotiate and address issues, motivate and communicate with employees, conduct performance reviews, and hire top talent. Demonstrated experience in leading software development teams w...

Responsible for leading the overall execution of the engineering for project assigned & shall lead the project till end as a package engineer. Responsible for the technical design of equipment (static and rotating) and package equipment.

Job Purpose This is an individual contributor position in Surface Technologies, Hyderabad. The role is responsible for executing activities assigned by the manager and execute it with the assigned team. Will work on assigned teams based on experience and business need: Project Engineering for Surface Americas or Surface international, Product Development and qualification testing, Product standardization. Job Description Leads project engineering, new product/technology development, product improvement and product standardization, and product qualification projects depending upon business need. Serves as a technical point of contact for assigned project or product scope and serve as a focal ...

Job Purpose Leads and supports project engineering, new product/technology development, product improvement and product standardization, and product qualification projects depending upon the assigned group. Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope. Develops product design, geometry standards documentation and product qualification requirements. Creates, reviews/approves part reports, drawings, engineering specifications and standards. Defines product quality, material, welding, and NDE requirements. Supports and manage project schedule and deliverables. Provides Management with technical ass...

Job Purpose This is an individual contributor position in Surface Technologies, Hyderabad. The role is responsible for executing activities assigned by the manager and execute it with the assigned team. Will work on assigned teams based on experience and business need: Project Engineering for Surface Americas or Surface international, Product Development and qualification testing, Product standardization. Leads project engineering, new product/technology development, product improvement and product standardization, and product qualification projects depending upon business need. Serves as a technical point of contact for assigned project or product scope and serve as a focal point for all co...

Responsibilities: * Conduct UT, RT, WPS, PQR inspections using NDT methods. * Perform welding, fabrication, ASME & ASTM code compliance checks. * Execute NDT level certifications and maintain equipment calibration.

Responsibilities: Conduct inspections and tests on raw materials, in-process production, and final products. Develop and implement quality control procedures and standards. Analyze data and prepare detailed reports on test results. Identify defects and recommend corrective actions. Collaborate with production teams to improve processes. Ensure compliance with industry regulations and quality standards. Maintain accurate documentation and records for audits. Required Skills: Attention for detail Team player Good in communication NDT level II (U.T.) & Quality Control awareness. Skilled to use all measuring instruments like Vernier caliper, micro meter, height gauge etc. Able to read mechanical...

Responsibilities: * Conduct NDT inspections using UT, RT, ASNT Level II techniques * Collaborate with cross-functional teams on project deliverables * Ensure compliance with industry standards and codes Travel allowance Provident fund Health insurance Annual bonus