Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Key Deliverables Responsible for achieving the Business Objectives of the Retail Liabilities Sales Team for the branch and meet the Value, Volume and channel Productivity metrics Responsible for generation of revenues through sale of CASA, X-Sell and Third Party Products like Insurance Responsible for Sourcing High Value CASA customer’s along with entire Family Banking relationships Sources new to bank customers through external individual efforts and acquisition channel Responsible for successfully contacting 20 customers per day. Responsible for meeting 4 customers/ prospects per day. Responsible for upgrading customers from a lower product category to high Desired Candidate Profile Good communication skills Comfortable working in a full- fledged sales profile / NTB Acquisition Customer orientation High energy levels with a motive to succeed Qualification, Experience & Age Criteria: Graduation qualification in any stream Candidates with 1-2 years of experience in NTB Sales Acquisition roles can apply Age Criteria : Maximum 30 Years of age.

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Key Deliverables Responsible for achieving the Business Objectives of the Retail Liabilities Sales Team for the branch and meet the Value, Volume and channel Productivity metrics Responsible for generation of revenues through sale of CASA, X-Sell and Third Party Products like Insurance Responsible for Sourcing High Value CASA customer’s along with entire Family Banking relationships Sources new to bank customers through external individual efforts and acquisition channel Responsible for successfully contacting 20 customers per day. Responsible for meeting 4 customers/ prospects per day. Responsible for upgrading customers from a lower product category to high Desired Candidate Profile Good communication skills Comfortable working in a full- fledged sales profile / NTB Acquisition Customer orientation High energy levels with a motive to succeed Qualification, Experience & Age Criteria: Graduation qualification in any stream Candidates with 1-2 years of experience in NTB Sales Acquisition roles can apply Age Criteria : Maximum 30 Years of age.

Expertise in AWS services like EC2, CloudFormation, S3, IAM, SNS, SQS, EMR, Athena, Glue, lake formation etc. Expertise in Hadoop/EMR/DataBricks with good debugging skills to resolve hive and spark related issues. Sound fundamentals of database concepts and experience with relational or non-relational database types such as SQL, Key-Value, Graphs etc. Experience in infrastructure provisioning using CloudFormation, Terraform, Ansible, etc. Experience in programming languages such as Python/PySpark. Excellent written and verbal communication skills. Key Responsibilities Working closely with the Data lake engineers to provide technical guidance, consultation and resolution of their queries. Assist in development of simple and advanced analytics best practices, processes, technology & solution patterns and automation (including CI/CD) Working closely with various stakeholders in US team with a collaborative approach. Develop data pipeline in python/pyspark to be executed in AWS cloud. Set up analytics infrastructure in AWS using cloud formation templates. Develop mini/micro batch, streaming ingestion patterns using Kinesis/Kafka. Seamlessly upgrading the application to higher version like Spark/EMR upgrade. Participates in the code reviews of the developed modules and applications. Provides inputs for formulation of best practices for ETL processes / jobs written in programming languages such as PySpak and BI processes. Working with column-oriented data storage formats such as Parquet , interactive query service such as Athena and event-driven computing cloud service - Lambda Performing R&D with respect to the latest and greatest Big data in the market, perform comparative analysis and provides recommendations to choose the best tool as per the current and future needs of the enterprise. Required Qualifications Bachelors or Masters degree in Computer Science or similar field 2-4 years of strong experience in big data development Expertise in AWS services like EC2, CloudFormation, S3, IAM, SNS, SQS, EMR, Athena, Glue, lake formation etc. Expertise in Hadoop/EMR/DataBricks with good debugging skills to resolve hive and spark related issues. Sound fundamentals of database concepts and experience with relational or non-relational database types such as SQL, Key-Value, Graphs etc. Experience in infrastructure provisioning using CloudFormation, Terraform, Ansible, etc. Experience in programming languages such as Python/PySpark. Excellent written and verbal communication skills. Preferred Qualifications Cloud certification (AWS, Azure or GCP) About Our Company Ameriprise India LLP has been providing client based financial solutions to help clients plan and achieve their financial objectives for 125 years. We are a U.S. based financial planning company headquartered in Minneapolis with a global presence. The firm’s focus areas include Asset Management and Advice, Retirement Planning and Insurance Protection. Be part of an inclusive, collaborative culture that rewards you for your contributions and work with other talented individuals who share your passion for doing great work. You’ll also have plenty of opportunities to make your mark at the office and a difference in your community. So if you're talented, driven and want to work for a strong ethical company that cares, take the next step and create a career at Ameriprise India LLP. Ameriprise India LLP is an equal opportunity employer. We consider all qualified applicants without regard to race, color, religion, sex, genetic information, age, sexual orientation, gender identity, disability, veteran status, marital status, family status or any other basis prohibited by law. Full-Time/Part-Time Full time Timings (2:00p-10:30p) India Business Unit AWMPO AWMP&S President's Office Job Family Group Technology

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Join our Team About this opportunity: Join Ericsson as an Oracle Database Administrator and play a key role in managing and optimizing our critical database infrastructure. As an Oracle DBA, you will be responsible for installing, configuring, Upgrading and maintaining Oracle databases, ensuring high availability, performance, and security. You’ll work closely with cross-functional teams to support business-critical applications, troubleshoot issues, and implement database upgrades and patches. This role offers a dynamic and collaborative environment where you can leverage your expertise to drive automation, improve efficiency, and contribute to innovative database solutions. What you will do: Oracle, PostgreSQL, MySQL, and/or MariaDB database administration in production environments. Experience with Container Databases (CDBs) and Pluggable Databases (PDBs) for better resource utilization and simplified management. High availability configuration using Oracle Dataguard, PostgreSQL, MySQL replication, and/or MariaDB Galera clusters. Oracle Enterprise Manager administration which includes alarm integration. Familiarity with Linux tooling such as iotop, vmstat, nmap, OpenSSL, grep, ping, find, df, ssh, and dnf. Familiarity with Oracle SQL Developer, Oracle Data Modeler, pgadmin, toad, PHP, MyAdmin, and MySQL Workbench is a plus. Familiarity with NoSQL, such as MongoDB is a plus. Knowledge of Middle ware like Golden-gate both oracle to oracle and oracle to BigData. Oracle, PostgreSQL, MySQL, and/or MariaDB database administration in production environments. Conduct detailed performance analysis and fine-tuning of SQL queries and stored procedures. Analyze AWR, ADDMreports to identify and resolve performance bottlenecks. Implement and manage backup strategies using RMAN and other industry-standard tools. Performing pre-patch validation using opatch and datapatch. Testing patches in a non-production environment to identify potential issues before applying to production. Apply Oracle quarterly patches and security updates. Implement and manage backup strategies using RMAN and other industry-standard tools. The skills you bring: Bachelor of Engineering or equivalent experience with at least 2 to 3 years in the field of IT. Must have experience in handling operations in any customer service delivery organization. Thorough understanding of basic framework of Telecom / IT processes. Willingness to work in a 24x7 operational environment with rotating shifts, including weekends and holidays, to support critical infra and ensure minimal downtime. Strong understanding of Linux systems and networking fundamentals. Knowledge of cloud platforms (AWS, Azure, GCP) and containerization (Docker, Kubernetes) is a plus. Oracle Certified Professional (OCP) is preferred Why join Ericsson? At Ericsson, you´ll have an outstanding opportunity. The chance to use your skills and imagination to push the boundaries of what´s possible. To build solutions never seen before to some of the world’s toughest problems. You´ll be challenged, but you won’t be alone. You´ll be joining a team of diverse innovators, all driven to go beyond the status quo to craft what comes next. What happens once you apply? Click Here to find all you need to know about what our typical hiring process looks like. Encouraging a diverse and inclusive organization is core to our values at Ericsson, that's why we champion it in everything we do. We truly believe that by collaborating with people with different experiences we drive innovation, which is essential for our future growth. We encourage people from all backgrounds to apply and realize their full potential as part of our Ericsson team. Ericsson is proud to be an Equal Opportunity Employer. learn more. Primary country and city: India (IN) || Noida Req ID: 764288 Show more Show less

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Profile Title: Western Music Vocals Trainer Profile Type: Full Time Locations: Jaipur Special Note: Candidates with a background in Indian Classical music who are open to learning Western techniques are strongly encouraged to apply. We believe in nurturing talent and will provide comprehensive training and support to help you transition and grow in Western vocal pedagogy. Profile Summary: We are seeking a passionate and skilled Western Music Vocal Trainer to join our dynamic music education team at Salim Merchant’s School of Musical Composition . The ideal candidate will have expertise in education and strong vocal training abilities. The trainer will be responsible for guiding students of all ages and skill levels through the journey of mastering musical techniques, fostering creativity, and enhancing their overall musical experience. Organization Overview: Gyansthan is a one-stop solution for all the skill development opportunities a school student needs to be prepared for the jobs of tomorrow. By launching academies in collaboration with some of the most renowned figures from various fields for the likes of Salim Merchant, Subhash Ghai, Cyrus Broacha, Shiamak Dawar, and many more, Gyansthan has developed programs that equip students with the practical knowledge and exposure necessary to succeed in their chosen careers. In addition to training, Gyansthan also focuses on Futuristic Learning Initiatives aimed at reimagining and upgrading traditional educational practices. Key Responsibilities: Provide group instructions and training for a variety of Western Vocal techniques. Customize lessons based on students' skill levels, interests, and learning pace. Design and implement a comprehensive music curriculum that covers theory, performance, and technique for both instruments and vocals. Prepare students for recitals, performances, and competitions, ensuring they are performance-ready and confident. Provide constructive feedback and personalized coaching to students. Maintain a positive, engaging, and structured learning environment to encourage creativity and discipline. Apply If: Bachelor's or Master’s (preferred) degree in Music, Performing Arts, Education, or a related field. Minimum 6 months of experience in teaching music, vocal techniques, or related subjects in schools/colleges. Strong understanding of Western music theory, ear training, and sight reading. Experience in curriculum design and educational pedagogy. Excellent communication and storytelling abilities. Feel free to reach out to hr.gyansthan@gmail.com for any further queries. Job Type: Full-time Pay: ₹35,000.00 - ₹50,000.00 per month Schedule: Day shift Work Location: In person Expected Start Date: 10/06/2025

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Job Description What's this role about? MS SQL DBA with AWS migration experience Here's How You'll Contribute You'll do this by: Core Skills: MS SQL DBA with AWS migration skills Desired Skills Current hands on working knowledge of AWS Databases such as RDS. Powershell Scripting Writing SQL DBA tasks and business logics as required. Ensure that database systems are safeguarded and implement necessary security measures to ensure data integrity Responsible for the organization, security and protection of the databases and data Responsible for controlling privileges and permissions to databases and for standards and design of physical data storage, maintenance, and access and security administration Assist with upgrading database for new version release when needed Willingness to work in 24x7 and US shifts Creation of MS SQL Database Backup/Restore and able to manage the MS SQL RDS system and environment. Able to create SQL Parameter configuration and tuning. Allocating system storage and planning future storage requirements MS SQL database system in AWS. How We’d Like You To Lead Advantage Zensar We are a technology consulting and services company with 11, 800+ associates in 33 global locations. More than 130 leading enterprises depend on our expertise to be more disruptive, agile and competitive. We focus on conceptualizing, designing, engineering, marketing, and managing digital products and experiences for high-growth companies looking to disrupt through innovation and velocity. Zensar Technologies is an Equal Employment Opportunity (EEO) and Affirmative Action Employer, encouraging diversity in the workplace. Please be assured that we will consider all qualified applicants fairly, regardless of race, creed, color, ancestry, religion, sex, national origin, citizen status, age, sexual orientation, gender identity, disability, marital status, family medical leave status, or protected veterans’ status. Zensar Is a Place Where You Are Free To Express Yourself In An Environment That Values Individuality, Nurtures Development And Is Mindful Of Wellbeing. We Put Our People And Customers At The Center Of Everything That We Do. Our Core Values Include Putting people first Client-centricity Collaboration Grow. Own. Achieve. Learn. with Zensar Show more Show less

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Organizations everywhere struggle under the crushing costs and complexities of “solutions” that promise to simplify their lives. To create a better experience for their customers and employees. To help them grow. Software is a choice that can make or break a business. Create better or worse experiences. Propel or throttle growth. Business software has become a blocker instead of ways to get work done. There’s another option. Freshworks. With a fresh vision for how the world works. At Freshworks, we build uncomplicated service software that delivers exceptional customer and employee experiences. Our enterprise-grade solutions are powerful, yet easy to use, and quick to deliver results. Our people-first approach to AI eliminates friction, making employees more effective and organizations more productive. Over 72,000 companies, including Bridgestone, New Balance, Nucor, S&P Global, and Sony Music, trust Freshworks’ customer experience (CX) and employee experience (EX) software to fuel customer loyalty and service efficiency. And, over 4,500 Freshworks employees make this possible, all around the world. Fresh vision. Real impact. Come build it with us. Job Description The Lead – IT Operations is accountable for designing, implementing, and maintaining the organization’s infrastructure, including routers, switches, Wi-Fi controllers, access points, load balancers, and firewalls. This role involves close collaboration with internal teams to ensure optimal performance, security, and timely resolution of infrastructure-related issues. Role & Responsibilities: ● Provide top notch support for any network issues ranging from implementation of new networks, troubleshooting outages for On-prem and remote networks business users. ● Handle level-2 support for Incidents, Changes and Service requests related to all Network & Security services ● Technical support for networking such as: WAN and LAN connectivity, Link load balancer, firewalls, wireless and security. ● Develop and maintain network documentation, including network topology and configuration information. ● Stay up to date with emerging trends and technologies in network & Security engineering. ● Performing network maintenance and system upgrades including service packs, patches, hot fixes, and security configurations ● Monitor system resource utilization, trending, and capacity planning for network devices. Deployment of new Offices based on the requirement of the number of users for the specific location. ● Manage WiFi Controllers, Switches, Access Points (Ruckus) & Firewalls, such as Palo Alto ● Remote access solution implementation and support such as IPSEC VPN & Remote VPN. ● Hands-On executing the backup and restore of software and configuration ● Must identify, resolve and replace malfunctioning hardware/software related incidents ● Hands-on experience in defining, deploying/managing and troubleshooting the AAA mechanism for user authentication for device management ● Understanding of DNS/DHCP. ● Ability to work with vendor support to resolve Operational and Project challenges. ● Respond to and resolve alerts and tickets generated from the monitoring system in a timely fashion. ● Create and Maintain record and maintain user support documentation (Knowledge Base) for Network & Security systems ● Maintain accurate time and records in all service tickets as performed and ensure the tickets get resolved with the given SLA timelines. ● Communicate with customers/inter teams as needed regarding ticket progress, changes or agreed outages. ● Escalate service/incident requests that require L3 Engineer level support in a timely fashion to prevent breach of SLA & Outage to business. ● Work within a network team or with multiple stakeholders to implement and improve best practices to enhance the user's experience and optimize the operation task. ● Work with the Helpdesk Team to prioritize critical or high-impact network issue ● Provide advanced troubleshooting support and guidance to ensure timely resolution ● Act as the primary escalation point for complex network issues that are beyond the scope of the Helpdesk Team. ● Maintain clear and consistent communication with Helpdesk personnel during ticket investigations and updates. Qualifications ● 8 -10 Years of relevant experience, Strong knowledge of Wireless/Wired LAN, WAN & Network Security infrastructure ● Candidate will be responsible for, but not limited to, the following: (Must Have) ○ Configuration, deployment, monitoring, troubleshooting, and analysis of Wired & Wireless network, WAN and Firewall infrastructure services ○ Actively monitoring and reacting to real-time network conditions and leading improvement efforts in support of monitoring, performance, and reporting. ○ Well exposed to handle operation, deployment, and monitoring in the Wired & Wireless, WAN and Firewall also good knowledge on standards such as wireless security mechanisms, network design principles, firewall technology, and wireless network control systems, with a primary focus on Ruckus/Aruba/Cisco/Palo Alto platforms. ○ Hands-on experience implementing, upgrading/administering, and troubleshooting wireless controllers with an emphasis on Ruckus/Cisco/Palo Alto/Link Load Balancer devices. ○ Should have good Debugging and Troubleshooting and log analysis skills ○ Hands-on experience in defining, deploying/managing and troubleshooting the Authentication, Authorization, Accounting mechanism for user authentication ○ Hands-On experience in integration of analytics tools with WiFi / LAN/ Firewall infrastructure for greater visibility and monitoring the traction happening with networks. ○ Excellent hands on knowledge of routing & switching technologies and troubleshooting ○ Hand-on experience & concept understanding in Firewalls like Palo Alto , PRISMA & Cisco. Skills & Certifications ● Must be well organized, responsible, and accountable ● Must be detail-oriented, quick to learn and self-motivated ● Strong understanding of TCP/IP networking and routing protocols. ● Engineers must have good written, verbal and presentation skills to collaborate successfully with team, vendors, and stakeholders. ● Certification Requirements : (if any) ○ CCNP Enterprise with network / security ○ Palo Alto Certification (PCNSE) ○ Wireless certification CWNA / CWNP ● Educational qualifications: B.E. Degree, with any discipline. Additional Information At Freshworks, we are creating a global workplace that enables everyone to find their true potential, purpose, and passion irrespective of their background, gender, race, sexual orientation, religion and ethnicity. We are committed to providing equal opportunity for all and believe that diversity in the workplace creates a more vibrant, richer work environment that advances the goals of our employees, communities and the business. Show more Show less

Company Description Wide Reach is a market leader providing comprehensive marketing solutions. Our expertise spans graphics and illustration, website development, and integrated marketing and promotion strategies. We pride ourselves on delivering high-quality, customer-centric services that drive business growth. We are seeking an experienced and visionary Marketing Director to lead our marketing initiatives and play a key role in the company’s overall growth. The ideal candidate will be responsible not only for driving successful marketing strategies but also for building and upgrading the marketing team, making strategic hiring decisions, and contributing to the overall business, especially during critical phases of profit or loss. Key Responsibilities: Strategic Marketing Leadership Develop and execute marketing strategies aligned with business goals to increase brand awareness, customer acquisition, and revenue growth. Team Building & Development Build, train, and upgrade the marketing team. Foster a high-performance culture and ensure the team remains motivated, skilled, and aligned with company goals. Hiring & Talent Management Identify talent needs, lead recruitment efforts for the marketing department, and ensure the team structure supports business scalability and innovation. Business Impact Management Contribute to broader business discussions, helping the company navigate both profitable periods and loss-making phases with strategic marketing support and insights. Digital & Performance Marketing Lead digital marketing efforts including SEO, PPC, social media, content marketing, and email campaigns to drive leads and measurable ROI. Brand Management Maintain and enhance the brand's positioning and communication across all touchpoints. Budget & ROI Management Allocate and manage marketing budgets effectively, focusing on cost-efficiency and high-impact initiatives. Campaign Planning & Execution Design, launch, and evaluate integrated marketing campaigns across online and offline channels. Market Research & Competitor Analysis Stay updated with industry trends and competitor strategies to keep the company ahead of the curve. Partnerships & Public Relations Build strategic alliances, explore influencer marketing opportunities, and lead media relations efforts to strengthen brand visibility. Reporting & Analytics Set KPIs, track performance metrics, and report results to senior leadership for continuous improvement. Qualifications Skills in Market Planning, Marketing Management, and Marketing Experience in conducting Market Research and analyzing data Proficiency in Sales strategies and operations Strong leadership and team management capabilities Excellent communication, interpersonal, and organizational skills Ability to work on-site in Ahmedabad Bachelor's degree in Marketing, Business Administration, or a related field MBA or relevant advanced degree is a plus Show more Show less

Organization Overview Company Description QAD is building a world-class SaaS company, and we are growing. We are looking for talented individuals who want to join us on our mission to help solve relevant real-world problems in manufacturing and the supply chain. Only candidates based in Mumbai, Pune, or Chennai will be considered, as our operations are strictly limited to these three locations Job Description The ERP Support Engineer plays a key role in delivering technical support for QAD and Progress products. This role focuses on providing effective solutions for customer-reported issues, managing technical inquiries, and ensuring seamless system operation through troubleshooting and resolution efforts. As a Support Engineer, you will engage with customers and partners via communication platforms such as CRM, telephone, email, and internet-based tools. Your responsibilities include diagnosing technical problems, resolving issues related to installations, upgrades, and configurations, and performing basic Progress DBA tasks under guidance. This position also involves documenting solutions and contributing to the organization's knowledge base to support continuous learning and team growth. You will work closely with senior team members, leveraging their expertise to improve your skills while ensuring timely and high-quality support delivery. Given that our support organization operates 24/7, this position demands a flexible approach to scheduling. You will be expected to participate in shift rotations, along with weekend shifts and potential on-call coverage as required. These elements are vital to providing continuous support to our global customer base. Your willingness to adapt to these scheduling requirements is crucial for the role. In a structured team environment, you will be encouraged to engage in continuous learning and regular practice of existing product knowledge. This is necessary to stay prepared for any new challenges that might arise. As a Sr. Functional Analyst, you have a unique opportunity to grow professionally while significantly contributing to the success of our clients and the organization. Technical Support And Troubleshooting Provide frontline technical support for QAD and Progress products, assisting with installations, configurations, upgrades, and troubleshooting. Diagnose and resolve basic technical issues, escalating complex cases to senior team members when required. Perform Progress DBA tasks under guidance, such as database monitoring, backups, and basic optimization. Incident Handling Manage incoming support requests through ticketing systems and communication channels, ensuring accurate categorization and prioritization. Resolve issues within defined Service Level Agreements (SLAs), escalating unresolved incidents appropriately. Proactively identify patterns in incidents to suggest preventive measures and reduce repeat occurrences. Documentation And Knowledge Sharing Maintain detailed and accurate documentation of troubleshooting steps, resolutions, and best practices for handled cases. Contribute to the organization’s knowledge base by documenting verified solutions and reusable resources. Develop simple guides or FAQs to empower customers and internal teams with quick access to relevant information. Customer Engagement And Communication Communicate regularly with customers to provide updates on issue resolution progress and next steps. Explain technical concepts clearly and concisely to ensure understanding by both technical and non-technical stakeholders. Foster trust and transparency with customers by demonstrating a proactive approach to addressing their concerns. Collaboration And Teamwork Work closely with peers, team leads, and cross-functional teams, such as R&D and Product Management, to address escalated issues. Participate in team discussions to share knowledge, discuss challenges, and contribute to process improvements. Leverage expertise from senior team members and collaborate to ensure effective resolution of complex cases. Shift Coverage And Flexibility Participate in shift rotations, weekend shifts, and on-call schedules to provide uninterrupted global support. Adapt to varying scheduling requirements to ensure timely assistance for customers across different time zones. Any Other Duties As Assigned Fulfill additional responsibilities as needed to support organizational goals and priorities, ensuring alignment with the overall mission of delivering high-quality support. Qualifications Education: A Bachelor’s Degree in Information Technology, Computer Science, or a related field. Equivalent experience will be considered. Experience 2+ years of relevant experience in supporting enterprise products, focusing on troubleshooting and resolving customer-reported issues. Strong problem-solving skills and a proven ability to manage high-priority cases in a fast-paced, customer-centric environment. Hands-on experience in ERP support is highly preferred, including: Installing, upgrading, and configuring ERP products like QAD, SAP, Oracle ERP, or Dynamics 365. Basic troubleshooting and resolving system-level issues related to performance and configuration. Progress DBA knowledge (e.g., backups, monitoring) is advantageous but not mandatory. Technical Skills Familiarity with debugging and troubleshooting in Unix/Linux and Windows environments. Basic knowledge of scripting (e.g., Shell) and SQL for issue diagnosis and resolution. Understanding of database management principles and system configurations. Soft Skills Strong analytical and problem-solving abilities. Exceptional communication skills, with the ability to explain technical concepts to non-technical stakeholders. Customer-focused mindset with a commitment to delivering high-quality service. Additional Information About QAD: QAD Inc. is a leading provider of adaptive, cloud-based enterprise software and services for global manufacturing companies. Global manufacturers face ever-increasing disruption caused by technology-driven innovation and changing consumer preferences. In order to survive and thrive, manufacturers must be able to innovate and change business models at unprecedented rates of speed. QAD calls these companies Adaptive Manufacturing Enterprises. QAD solutions help customers in the automotive, life sciences, packaging, consumer products, food and beverage, high tech and industrial manufacturing industries rapidly adapt to change and innovate for competitive advantage. QAD is committed to ensuring that every employee feels they work in an environment that values their contributions, respects their unique perspectives and provides opportunities for growth regardless of background. QAD’s DEI program is driving higher levels of diversity, equity and inclusion so that employees can bring their whole self to work. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Show more Show less

Responsibilities Create and manage multiple databases and capacity planning. Monitor and tune database performance using tools like Query Store, DMVs, and SQL Profiler. Maintain data integrity and security (manage roles, permission of database users). Use tools like SQL profiler for database tuning, should be able to generate traces, execution plans, identify performance bottleneck, deadlocks/contention and resolve them Develop strategies and implement solutions for managing back-ups, restoration and replication. Create and manage constraints and indexes. Support software developers with database operations including the development of complex SQL, tuning of DML and the creation of stored procedures. Proactive housekeeping/archiving and shrinking of databases. Manage production, QA, Stage and development database environments. Create detailed documentation including diagrams of database infrastructure. Learn relevant business processes and understand the data flow, criticality and dependencies. Effectively coordinate and communicate with all the stakeholders (internal teams and clients). Requirements Bachelors or Master’s degree in computer science or equivalent and a total of 3-5+ years’ experience in MSSQL Database administration using SQL Server 2014/2016/2017/2019/2022 versions. Experience in SQL Server Clustering and HA technologies including mirroring, log shipping, failover cluster, AlwaysOn and various replication technologies would be an advantage. Experienced in SQL Server Integration Services (SSIS), SQL Server Reporting Services (SSRS). Expertise on cloud platform like AWS, Azure etc. Sound knowledge of RDBMS concepts, database architecture and SQL/T-SQL. Proficient with SQL server profiler for monitoring and troubleshooting database activity and performance. Ability to develop procedure documents and maintain detailed database related documents. Innovative approach to work, constantly looking for upgrading the system to more efficient and effective new technologies. Able to organize work efficiently and work well under stress, changing priorities, and time constraints Nice to Have Expertise on MySQL/PostgreSQL/MongoDB with Linux environment including Backup, replication Configuration for DR purpose. Familiarity with compliance guidelines like SOC II, FINRA and best practices like ITIL, Change/Incident Management Morningstar is an Equal Opportunity employer Morningstar’s hybrid work environment gives you the opportunity to work remotely and collaborate in-person each week. We’ve found that we’re at our best when we’re purposely together on a regular basis, at least three days each week. A range of other benefits are also available to enhance flexibility as needs change. No matter where you are, you’ll have tools and resources to engage meaningfully with your global colleagues. I10_MstarIndiaPvtLtd Morningstar India Private Ltd. (Delhi) Legal Entity Show more Show less

Full Stack Engineer(React)– Job Description Skills needed: • Well-versed in agile ways of working and familiar with common tools including JIRA and Confluence; • 5+ years of experience working with various language stacks, focusing on ReactJS & NodeJS • Familiarity with cloud-based technologies and architectures (AWS, Azure or GCP). AWS knowhow is preferred; • Broad-based knowledge on custom (primarily web) application development • Demonstrable expertise with web and mobile application and related architectures and concepts (e.g. security, microservices, etc.); Responsibilities To maintain and support Agile products, which includes: • Supporting application changes that might impact existing functionalities and processes or involve new features altogether • Maintenance and upgrading of product tech stack • Provide solutions or workarounds with regards to existing functionalities • Answer functional queries: - E.g. how to use functionalities • Testing and release management • Participate in users training • Provide Audit and security review support Good to have: • Experience with CI/CD practices and systems (e.g. git, git flow, trunk-based development). • Understanding of containers and associated tools in the orchestration and monitoring space including but not limited to Kubernetes, Terraform, Prometheus, Kibana and Grafana Show more Show less

Role: PostgreSQL DBA Location: Pune(Remote) Job Description: • Drive end-to-end availability, performance monitoring, and capacity planning for PostgreSQL, using different tools. • Support in Installation, configuration and upgrading PostgreSQL software and products as per guidelines given. • Implement automated methods and industry best practices for consistent installation and configuration of PostgreSQL for production and non-production environments • Planning for and actual backup and recovery of database information. • Ensure performance, security, and availability of databases. • Prepare documentations and specifications. • Experience in backup and recovery procedures including familiarity with PBBACKUP, pgdump and BARMAN. • Experience in Master and slave replication setup. • Experience in setup hot standby. • Experience in PostgreSQL db upgrade. • Experience in managing PostgreSQL on cloud (PAAS/IAAS). • Experience in Managing PostgreSQL via DOCKER. • Health checkup of PostgreSQL database. • Experience in Performance Tuning. • Experienced in integrating with AD for user management • Experience in managing PostgreSQL via PGBAGER and DATADOG. • Writing Cron Jobs/Shell scripting for DBA Administrator tasks • Manage Disaster Recovery environment. • Identify and resolve incidents and address user problems/concerns. • Ability to generate reports of all processes and jobs currently running on PostgreSQL • Should have worked on Linux platform. • Should have worked on cloud AWS and Azure (IAAS and PAAS ) • Should have worked on managing PostgreSQL on Docker Container. • Good to have Familiarity with other SQL/NoSQL databases such as MySQL, MongoDB, etc will be added advantage Show more Show less

We have an opportunity for the post of “BUSINESS DEVELOPMENT MANAGER-” profile details for the same are as mentioned below :- Location - Banglore SALES PROFILE Job Description (Roles & Responsibilities): 1. Responsible for acquiring and developing new business from IT –ITes . 2. Business plan for increasing the profitability of the division i.e., cost control and cost-based Decision-making. 3. Profit planning in relation to overall corporate objectives. 4. To close deals for the leads generated either by self initiated calls or internal leads given. 5. Responsible for Payment Collection from the customers. 6. Ensuring all support staff play a key role in servicing the client accounts. 7. Conducting weekly reviews with his immediate Boss and fellow colleagues. 8. Commercial judgments and customer orientation to develop along with the principles. 9. Seeing the sale through, providing good customer service and continuing business development 10. Looking for opportunity identifying wider sales across the whole account. 11. Attending Product Training organized by Principles for Upgrading Product Knowledge. 12. Researching customer's profile for accurate positioning giving effective and Skillful Presentations. 13. Working as per the company's predefined Rules & Regulations. 14. Coaching and mentoring of the team. Product Line : Experience in selling Enterprise Solution which includes (IT-Solution sales, Datacenter solution, IT -Storage, Server Sales, Networking Solutions - Switches, Routers, Firewall, Voice, Wireless Solutions, Passive components, Business Consulting & Infrastructure Management Services). Should be a Engineering graduate (B.E/B.Tech,Bsc.IT) . I Kindly mention the below things in your updated CV. 1) Current CTC 2) Expected CTC 3) Joining Period required For further query / concern feel free to ask. Show more Show less