794 Thermal Jobs - Page 12

Job Title Design Engineer Group – Solid Fuel group Location -Pune Years of exp – 4-8 years Roles and Responsibility Boiler and Heater Design Support Assist in preparing Heat and Mass Balance Diagrams (HMBDs), Process and Instrumentation Diagrams (P&IDs), and Process Flow Diagrams (PFDs). Support thermal sizing and preliminary engineering of boilers, heaters, and related components based on project requirements. Drawing and Documentation Preparation Create and release manufacturing drawings, General Arrangement and Technical Particulars (GATP), and Bills of Materials (BOMs). Contribute to drafting project-specific documents like foundation drawings, site layouts, and Operation & Maintenance (O&M) manuals. Material and Component Selection Assist in selecting materials as per Indian Boiler Regulations (IBR), IS, ASTM, BS, and EN standards. Perform basic mechanical strength and sizing calculations for pressure and non-pressure parts under supervision. Bought-Outs and Subsystems Coordination Help in sizing and selecting bought-out equipment such as fans, pumps, ash/fuel handling systems, and pollution control devices. Support review of vendor datasheets, technical specifications, and general arrangement drawings (GADs). Layout and System Design Assistance Support development of block layouts and hookup schemes for integration with customer facilities. Provide design inputs for piping and structural layouts in coordination with vendors and internal teams. Project Coordination Coordinate with internal teams (Projects, Proposals, Materials, Vendors) to gather inputs and finalize design aspects. Attend internal design reviews and support resolution of engineering queries. Customer and Consultant Interaction Support Assist in managing customer/consultant queries and technical reviews during various project stages. Incorporate client feedback and revisions into engineering deliverables. Use of Engineering Tools and Software Utilize tools like AutoCAD, Solid Edge, PDMS (Plant Design Management System), and TEKLA for 2D/3D modeling. Support structural and piping analysis through STAAD and CAESAR under guidance. Safety Norms Adherence: Adhere to all safety norms, guidelines, and standard operating procedures at the workplace. Contribute to building a safe and risk-free work environment. Report safety incidents or potential hazards promptly as per protocol. Technical Skills Knowledge of Thermal Design , Proficiency in AutoCAD and Solid Edge , Understanding of IBR/IS/ASTM/ASME Standards, Familiarity with 3D Modeling Tools like PDMS and TEKLA , Understanding of Bought-Out Equipment Sizing

Job Title: CFD Engineer Automotive Thermal Systems Experience: 2 to 4 years Location: Bangalore/Bengaluru Tools: Star-CCM+, ANSA/Hypermesh (optional), MATLAB/Python (optional) Job Summary: We are looking for a passionate and detail-oriented CFD Engineer with experience in thermal systems and heat transfer simulations within the automotive industry . The ideal candidate should have hands-on expertise in Star-CCM+ and be capable of independently executing 3D CFD simulations for engine cooling, HVAC systems, battery thermal management , and other heat-sensitive components. Key Responsibilities: Perform 3D CFD simulations using Star-CCM+ for various thermal systems in vehicles. Analyze cooling performance of powertrain components (engine, e-motor, battery, inverter, etc.). Develop thermal models for underhood airflow , radiator/heat exchanger performance , cabin HVAC , etc. Interpret and validate CFD results against experimental data or benchmarks. Work closely with design , testing , and systems teams to recommend improvements based on CFD insights. Ensure simulation practices follow industry best standards for mesh quality, solver settings, and boundary conditions. Optimize designs by performing parametric studies , DOE , and sensitivity analysis . Must-Have Skills: Minimum 1 year of hands-on experience in automotive CFD (thermal domain). Strong expertise in Star-CCM+ for thermal/heat transfer problems. Good understanding of fluid dynamics, heat exchangers, thermal conduction/convection . Experience with model setup, meshing, solver controls , and post-processing in Star-CCM+. Familiar with thermal systems in ICE and EV platforms . Working knowledge of CAD tools (CATIA, NX) and pre-processing software like ANSA or Hypermesh. Solid problem-solving and analytical skills. Good to Have: Exposure to Multiphysics simulations (e.g., Conjugate Heat Transfer, Multiphase Flow). Education: Masters degree in Mechanical / Automotive / Thermal Engineering or a related field.

Sr. Product Consultant Senior Technician - Repair & Testing Bangalore Apply Now Details Senior Technician - Repair & Testing Category: Repair Operations Qualification: Diploma / BE in Electronics, Electrical, or Computer Hardware Engineering. Experience: 3-6 years Location: Bangalore Duties and Responsibilities Key Responsibilities: Perform motherboard-level fault diagnosis and repair of laptops across various OEM brands. Conduct chip-level soldering and desoldering of BGA, SMD, and QFN components using hot air rework stations and soldering tools. Reprogram BIOS and perform firmware upgrades using specialized tools and programmers. Identify and replace faulty ICs, capacitors, resistors, transistors, and MOSFETs. Diagnose and resolve power-related issues, including VRM (Voltage Regulator Module), power rail faults, and short circuits. Utilize schematics and board-view software (e.g., OpenBoardView, FlexBV) for tracing signals and debugging. Perform stress testing and full validation of repaired motherboards to ensure long-term stability. Maintain accurate documentation of repair findings, parts used, and resolution methods. Ensure adherence to ESD safety, quality standards, and repair TAT (Turnaround Time) targets. Required Skills & Qualifications: 3 6 years of hands-on experience in motherboard-level laptop repair. Proficiency in chip-level rework techniques and advanced soldering practices. Strong understanding of circuit diagrams, signal flow, and power sequences in laptops. Familiarity with diagnostic tools such as multimeter, DC power supply, oscilloscope, and thermal cameras. Experience with BIOS programming tools (e.g., RT809H, EZP, CH341A). Ability to handle precision repairs under a microscope. Preferred Skills: Ability to mentor L2 technicians and guide on escalated repair cases. Basic knowledge of thermal management and heatsink reapplication. Good communication skills for technical reporting and coordination. Apply

Sr. Product Consultant Technician - Repair & Testing Bangalore Apply Now Details Technician - Repair & Testing Category: Repair Operations Qualification: Diploma / B.E. / B.Tech in Electronics, Electrical, or Computer Hardware Engg Experience: 3 - 6 Years Location: Bangalore Duties and Responsibilities Key Responsibilities: Read and interpret electronic schematics and board view files to trace signals and identify faults. Perform in-depth circuit-level troubleshooting using logical diagnostic techniques and precision tools. Carry out advanced rework procedures, including BGA reballing, SMD replacement, and micro-soldering. Use tools such as multimeters, oscilloscopes, thermal cameras, and LCR meters for diagnostics and verification. Replace and repair defective components, including ICs, MOSFETs, capacitors, transistors, and VRMs. Resolve power rail issues, short circuits, no-boot conditions, and other critical PCB-level problems. Flash and recover BIOS or embedded firmware using EEPROM programmers. Document repair steps, parts used, and resolutions in the internal tracking system. Maintain a clean and ESD-safe workstation, following all safety and quality protocols. Support escalations from L1/L2 engineers and mentor junior team members when needed. Required Skills & Qualifications: 3 6 years of hands-on experience in PCB or motherboard-level repair. Excellent schematic reading and signal tracing ability. Proficiency with board view tools (e.g., OpenBoardView, FlexBV). Strong rework skills with experience in BGA, SMD, and fine-pitch component handling. Working knowledge of BIOS flashing tools and DC power analysis. Preferred Skills: Experience with major laptop and desktop brands Familiarity with thermal profiling and proper use of hot air rework stations. Knowledge of fault analysis documentation and root cause analysis (RCA) techniques. Basic software knowledge for system validation post-repair. Apply

Sr. Product Consultant Repair Engineer Bangalore Apply Now Details Repair Engineer Category: Repair Operations Qualification: Diploma / ITI / BE / BTech in Electronics, Electrical, or Hardware Engg. Experience: 3 - 6 Years Location: Bangalore Duties and Responsibilities Key Responsibilities: Analyze motherboard schematics to trace signal paths, identify power sequences, and locate fault points. Troubleshoot and repair faults at the chip and circuit level on laptop and desktop motherboards. Use board view software (e.g., OpenBoardView, FlexBV) to assist in pinpointing issues. Replace faulty components, including ICs, MOSFETs, capacitors, resistors, and voltage regulators. Perform BGA rework, SMD soldering/desoldering, and micro-soldering using precision tools. Resolve critical issues such as short circuits, no power, no display, and power rail breakdowns. Flash BIOS/firmware and validate system boot and stability post-repair. Utilize diagnostic tools like multimeters, DC power supplies, oscilloscopes, and thermal cameras. Document all repairs, replaced components, fault types, and resolution methods in the service management system. Collaborate with QA and L1/L2 repair teams to share learnings and reduce repeated failures. Follow all ESD safety guidelines, repair SOPs, and quality compliance procedures. Required Skills & Qualifications: Minimum 3 6 years of experience in L3-level motherboard repair. Strong ability to read and interpret circuit schematics and understand signal flow and power architecture. Expertise in using board view tools for fault tracing and circuit referencing. Skilled in component-level repair, including handling of BGA and SMD components. Proficient in BIOS reprogramming and embedded firmware flashing. Familiar with various OEM hardware platforms, including Dell, HP, Lenovo, and ASUS. Preferred Skills: Experience with high-density multilayer PCBs and lead-free soldering practices. Familiarity with RMA processes, quality audits, and root cause analysis (RCA) methods. Ability to guide and mentor junior engineers or L2 repair personnel. Apply

Looking for PCB layout design Engineer with the following requirements: Hands-on experience in complex, high-density, high-speed PCBs, Analog, Digital, RF, mixed-signal PCB layout design. Exposure with complex 2U, 3U server form factor-based PCB designs. Hands-on experience with High-speed interfaces like DDR3,DDR4/5, LPDDR, , PROCESSORS, FPGA, PCIE, USB, SATA, MIL-1553, ADC, DAC, ETHERNET, NAND & NOR FLASH, SD, RS-422, BLUETOOTH 4.0, WIFI, GPS, GSM etc. Hands on Complex layout HDI designs with multiple BGAs and Multiple Fine pitch BGA (0.8mm and 0.5mm) of high pin count (2084 pins). Library creation as per IPC 7351 standard. Electrical Constraints setup for high-speed modules to match its requirement (Length match, impedance, delay tuning requirements) Experience in Power supply layout design types: AC to DC, DC to DC converters and SMPS. Creation of file type conversions from PCB to DXF, IDF, Step file collaboration with Mechanical Engineer. Power supply layout designs & its critical requirements to meet stringent isolations. Gerber validation and generations of final deliverables for DFM. Working experience on Gerber viewers using Cam350, ODB++ viewer. Collaborating with multiple functional teams like design, SI/PI, mechanical, DFM, DFA etc. in a product development environment knowledge on Power dc, Thermal design, simulation and analysis knowledge of OrCAD schematic Design Tool Collaboration with cross functional teams: Software, Electrical, Mechanical and PCB CAD teams Hands-on experience with Cadence Allegro/Altium EDA/PADS tools is essential. Education Requirements: B. Tech/B.E./M. Tech./M.E. Shift: 9:30 AM to 6:30 PM Work Mode: Office (Monday to Friday)

for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines How you ll make an impact The success candidate will be the part of an International Design and Engineering Team specialized in Oil Type Distribution Transformer design covering different countries. Responsible for Preparation of Customer documents, Manufacturing drawings, Bill of materials etc. Responsible to generate active part and windings meeting factory limitation, guideline, and checklist as per IEEE standards. Responsible for development of various application transformers designs in coordination with global Hitachi Energy factory based on the purchase order requirements, ordering specification in different areas of transformer Mechanical design. Coordinating design activities within a worldwide factories network. Participation in internal design concept reviews. Demonstrated team building skills and networking skills, would be a preference. Ability to speak with and work together with the technical teams in different parts of the world. Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Your background: Graduate in Mechanical Engineering. 2-7 years experience working in Mechanical design for Distribution or Power Transformers manufacturing industry. Candidates with higher experience also to be considered. Should have good understanding of IS/ IEC /IEEE Standards. Should understand clearance/creepage, basic layout and cleats lead arrangement. Experience in winding design is advantage. Knowledge on CAD software, any 3D Modeling software like Creo is must. A team player, open with information and willingly contributes to team discussions with an ability to work without supervision when required. Proficiency in both spoken & written English language is required. .

Wanting to find solutions to issues in Learning and Education, working passionately, creating new routes, strong conceptual skills, execution skills and writing skills, ability to interact with subject matter experts, and high determination are the key ingredients required for this role. Above all, thought-clarity in problem-solving is critical. The position is open on part-time, contractual, turn-key, and full-time bases. Having worked in a role that involved all of these skills is a must.

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position The Construction Engineer is responsible for overseeing and coordinating the project works contractors and maintaining the project performance goals. He coordinates work efforts and ensures activities are sequenced in accordance with the project schedule. A construction engineer must be a competent person in the construction business so that he accurately evaluates the methods and performance in all respects of the particular scope elements of the project for which he is accountable. Experience • Minimum 5 – 10 years of onsite experience on major projects under any sector – Infrastructure, Real Estate, Power, Steel or Chemical • Involvement in at least 2 significant major project similar in size and scope as delivered by TCE Qualification • Postgraduate or graduate in an engineering discipline • Post graduate degree/diploma in construction management (preferable) Key Responsibilities 1. Monitors overall job site health, safety and environment performance and verifies that contractors are protecting their workers at the job site. 2. Responsible for construction supervision and contract administration including supervision of contractors and their subcontractors for assigned portions of the project. 3. Assists in the coordination of the design deliverables to support continuous and efficient construction. 4. Job site point of contact for all contractors in his assigned area of the project. 5. Plans and chairs project safety meetings, assists with incident investigations and reporting, and participates in TCE safety programs and initiatives. 6. Communicates the identification, management and resolution of deficiencies and non-conformance to the Construction Manager. 7. Assists with construction estimating, scheduling, reporting, cost control, measurement verification and invoice certification for all work being performed by the contractor in his assigned area of the project. 8. To lead complete Bill Certification process, Measurement of Quantities, resolution of extra scope for assigned construction area or structure or domain or discipline. Enforce Change Management and Request for Information (RFI) management process 9. During absence of the Construction Manager, act as administrative spokesperson. 10. Assist with the development and review of construction related information for the purpose of proposals and other related business improvement activities. 11. Participate in and provide construction input for project constructability plans. 12. To provide inputs for daily, weekly and monthly progress reports, track contractor’s asking rates for major construction activities, to workout catch up plans suit to site conditions 13. Assist the Construction Manager to address site issues and developorimplement a remedy. 14. Assist in coordinating between constructions and commissioning and establishing an effective handover policy. 15. Ensures that Project safety plan and project quality plan is strictly implemented 16. Provides inputs for planning and billing activities Competencies

We need someone with 1-3 years of experience along with below skill set,Knowledge and hands on FEA Analysis, Structural Analysis, Thermal AnalysisSolid Mechanics, Vibration, and thermal basic knowledge Required Candidate profile Ansys Workbench hands on experience Good communication and team player

Purpose Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Ensures Accountability Decision Quality Manages Complexity

The Construction Engineer is responsible for overseeing and coordinating the project works contractors and maintaining the project performance goals. He coordinates work efforts and ensures activities are sequenced in accordance with the project schedule. A construction engineer must be a competent person in the construction business so that he accurately evaluates the methods and performance in all respects of the particular scope elements of the project for which he is accountable. Experience Minimum 5-10 years of onsite experience on major projects under any sector Infrastructure, Real Estate, Power, Steel or Chemical Involvement in at least 2 significant major project similar in size and scope as delivered by TCE Qualification Postgraduate or graduate in an engineering discipline Post graduate degree/diploma in construction management (preferable) Key Responsibilities 1. Monitors overall job site health, safety and environment performance and verifies that contractors are protecting their workers at the job site. 2. Responsible for construction supervision and contract administration including supervision of contractors and their subcontractors for assigned portions of the project. 3. Assists in the coordination of the design deliverables to support continuous and efficient construction. 4. Job site point of contact for all contractors in his assigned area of the project. 5. Plans and chairs project safety meetings, assists with incident investigations and reporting, and participates in TCE safety programs and initiatives. 6. Communicates the identification, management and resolution of deficiencies and non-conformance to the Construction Manager. 7. Assists with construction estimating, scheduling, reporting, cost control, measurement verification and invoice certification for all work being performed by the contractor in his assigned area of the project. 8. To lead complete Bill Certification process, Measurement of Quantities, resolution of extra scope for assigned construction area or structure or domain or discipline. Enforce Change Management and Request for Information (RFI) management process 9. During absence of the Construction Manager, act as administrative spokesperson. 10. Assist with the development and review of construction related information for the purpose of proposals and other related business improvement activities. 11. Participate in and provide construction input for project constructability plans. 12. To provide inputs for daily, weekly and monthly progress reports, track contractor s asking rates for major construction activities, to workout catch up plans suit to site conditions 13. Assist the Construction Manager to address site issues and developorimplement a remedy. 14. Assist in coordinating between constructions and commissioning and establishing an effective handover policy. 15. Ensures that Project safety plan and project quality plan is strictly implemented 16. Provides inputs for planning and billing activities

Job Overview Were looking for highly experienced and skilled Electrical BIM Coordinator to support project execution and coordination activities. The ideal candidates will have 6 to 12 years of experience in BIM processes, MEP coordination, and client interfacing, with advanced proficiency in Autodesk Revit, Navisworks, and related BIM tools. Key Responsibilities Lead and manage BIM coordination activities for Electrical systems across multiple projects. Collaborate closely with architectural, structural, and MEP teams to resolve clashes and ensure coordinated design models. Develop, review, and manage detailed Revit models for power, lighting, low voltage, and fire alarm systems (Electrical) . Conduct and participate in coordination meetings and walkthroughs with internal teams and clients. Perform clash detection using Navisworks and generate clash reports. Ensure all models adhere to project BIM standards, company protocols, and client requirements. Support documentation, extraction of BOQs, and shop drawings from BIM models. Provide technical guidance to junior modelers and engineers. Track model progress, update logs, and ensure timely deliverables. Required Skills and Qualifications Bachelors degree or diploma in Electrical Engineering or a related field. 6-12 years of experience in BIM coordination, preferably in large-scale MEP projects. Proficient in Autodesk Revit MEP, Navisworks Manage, AutoCAD, BIM 360. Strong knowledge of electrical systems, international codes (NEC, IEC, NFPA, etc.) . Hands-on experience with clash detection, model coordination, and project documentation. Excellent communication and client coordination skills. Ability to work independently and lead coordination meetings. Preferred Qualifications Certification in Autodesk Revit or BIM Management. Familiarity with COBie, ISO 19650, and LOD requirements. Experience in Data Center, Hospital, Commercial, or Infrastructure BIM projects. ABOUT CONSERVE: Group Established in 2016 in Qatar, to serve the Construction Sector with Engineering Design Support Services to companies in Asia, Middle East, Europe, Australia, Canada, US and other parts of the world, we are an exponentially growing engineering company with 600+ People across the globe. Conserve provides wide range of services for green building and MEP solutions. Engineering design and support such as Architectural drawings, Structural drawings, MEP, BIM modeling, CAD services and 3D scanning. Sustainability such as LEED services, GSAS services, Energy services, CXA commissioning, Environmental services, Acoustical services, CEEQUAL consultancy services and BREEAM. Simulation and analysis such as Simulation engineering, Structural analysis, Stress analysis, Surge analysis, Computational fluid dynamics, detailed engineering services and Building envelope design and simulation. Thermal Imaging - Infrared Thermography.

Entec Advanced Technologies Ltd is looking for Installation Technician to join our dynamic team and embark on a rewarding career journey Install, configure, and maintain equipment and systems in various environments Perform onsite installations of hardware, software, and networking components Troubleshoot and resolve technical issues related to installations and configurations Conduct testing and quality assurance checks on installed systems to ensure functionality Provide training and support to end-users on system operation and maintenance Document installation procedures, configurations, and troubleshooting steps Adhere to safety protocols and regulations during installation activities Collaborate with project teams and stakeholders to ensure project goals are achieved

Hungry for challengesJoin a group with innovation at its heart and contribute to the automotive revolution! OPmobility is a world-leading provider of innovative solutions for a unique, safer and more sustainable mobility experience Innovation-driven since its creation, the Group develops and produces intelligent exterior systems, customized complex modules, lighting systems, clean energy systems and electrification solutions for all mobility companies With a ?11 4 billion economic revenue in 2023, a global network of 152 plants and 40 R&D centers, OPmobility relies on its 40,300 employees to meet the challenges of transforming mobility OPmobility Lighting covers the entire lighting value chain, from components to complete headlamps, from traditional lighting to intelligent and high-performance products The business group develops interior and exterior solutions that enable greater design freedom, enhanced safety and driver assistance Our ambitionProvide automakers with cutting-edge equipment and solutions to develop tomorrows clean and connected car Responsibilities Lighting Product Design (Head Lamp, Tail Lamp, Fog Lamp etc) in Automotive applications using Thermal CAE s/w ANSA, Sim Center 3D in close coordination with PD Global CAE & PD Team Working thru Proprietary or specific Tools & Technologies on Lighting CAE for Automotive requirements as applicable on Forward & Current Programs Sound Knowledge with working level expertise on ANSA, Sim Center 3D s/w for Lighting Applications in Automotive Once the thermal task is assigned, He/ She needs to get required inputs (Specifications, CAD data, TM card, electronics, etc ) from task requestors, based on that confirm expected delivery data of report To get required inputs need to coordinate with different departments Need to prepare lamp mesh models as per internal guidelines, Apply boundary conditions as per specification & prepare number of cases based on customer specifications Evaluate results & prepare report Deliver report through enterproj & close the task in CAE portal Maintaining the Time records, data Management & project Details Participating in Design Reviews with Cross Functional PD & Manufacturing Team Understand the Customers work requirement and project deliverables Meeting the quality Procedure/Standards for Thermal CAE of Components (assembly & part Level) Knowledge of design documents DFMEA, DVP, Reliability Matrix etc will be a added advantage EDUCATION REQUIREMENT(S): BE/ME Mechanical or Automotive Engineering EXPERIENCE REQUIREMENT(S): 2 to 3 Years Experience in Thermal CAE Product Design Experience of CAE s/w like ANSA & Sim Center 3D for Thermal Simulations Good Knowledge of Materials 95 % CAE results should co-related with physical test results Maintaining CAE KPI Document Excellent Thermal CAE/Analytical Skills Excellent Knowledge of Materials worked as a Lighting product CAE Engineer Good Knowledge of Manufacturing Processes ADDITIONAL INFORMATION: Good Communication Skills Good Attitude for Learning Should be an excellent Team Player Adherence to timeline & Quality Good Behavior with an attitude of learning As a responsible company, OPmobility pays particular attention to diversity and equality within its teams and the Group commits to treat all job applications equally

We are looking for a skilled and detail-oriented Mechanical Design Engineer to join our engineering team. You will be responsible for designing mechanical components and assemblies using CAD tools like SolidWorks , and validating designs through Finite Element Analysis (FEA) . The ideal candidate should have a strong mechanical engineering foundation, experience in creating manufacturing-ready drawings, and a hands-on approach to problem-solving. Key Responsibilities: Design mechanical components, assemblies, and systems using CAD tools such as SolidWorks . Perform FEA simulations (stress, thermal, vibration, etc) to ensure structural integrity and performance. Collaborate with cross-functional teams including electrical, manufacturing, and product teams to refine designs. Prepare 2D detailed drawings, BOMs, and documentation for manufacturing and assembly. Participate in design reviews and contribute to continuous improvement efforts. Ensure designs comply with industry standards, safety guidelines, and product specifications. Support prototyping, testing, and troubleshooting of mechanical components. Maintain version control and documentation of all design files and revisions. Requirements: Bachelors or Masters degree in Mechanical Engineering or related field. 1+ years of experience in mechanical design and CAD modeling. Proficient in SolidWorks (or similar 3D CAD tools). Strong understanding and hands-on experience with Finite Element Analysis (FEA) tools (eg, ANSYS, SolidWorks Simulation). Knowledge of manufacturing processes such as CNC machining, sheet metal fabrication, injection molding, etc Familiarity with GD&T, tolerance stack-up analysis, and DFM/DFA principles. Strong analytical skills, attention to detail, and problem-solving ability. Excellent communication and documentation skills. Nice to Have: Experience in designing for drones, robotics, or aerospace applications . Exposure to PLM systems and revision control. Hands-on experience in prototyping or lab testing .

Early engagement with Key accounts / End Users / OEMs and Effective coverage of OEMs and End Users in assigned territory/region. Responsible for Booking Targets, tracking all end user projects in advance and positioning & upselling our product portfolio. Manages and collaborates with project pursuit and industry segment leaders while, having overall responsibility to Meet/Exceed Budget/Targets. Extensive travelling within defined region, Planning of travel to the various end user industrial customers clusters and presentation to customers, preparing the customer matrix, Identifying the decision makers of upcoming projects and collaborating with them for business. Creating primary demand for Rosemount Measurement Products along with focus on Highly Differentiated Solutions (Electronic remote seal, Thermal Expander, SMV etc) Develop and build relationships with key customer decision-making teams to influence and gain market share of Rosemount measurement products. Protecting and expanding install base at customers. Regular meeting with key customers top level engagement team and presenting them about product superiority / create differentiation and develop new customers / markets. Team Collaboration: Internal / external customers communication, open-mindedness, and conflict resolution when working with other team members on a joint objective. Ensure following all Emerson Values and Ethics standards

We are looking for an Electrical Hardware Engineer 2 to join our Aerospace Platforms COE team in Bangalore, India. As an active member of the electronics design team, you will be responsible for assisting the project leader in various tasks such as requirements management, electronics circuit design, analysis, implementation, and testing of aerospace electronics products and printed circuit cards. - BE/B. Tech or ME/M. Tech in Electronics Communication Engineering or Electrical Engineering - 2-3 years of experience in electronics hardware engineering - Good understanding of analog, digital, and microprocessor circuits fundamentals - Knowledge of Mentor Schematic and Layout tools - Dx Designer, Hyper lynx DRC, Hyper lynx SI - Practical experience in analysis and troubleshooting - Strong written and verbal communication skills - BE/B. Tech or ME/M. Tech in Electronics Communication Engineering or Electrical Engineering - 2-3 years of experience in electronics hardware engineering - Good understanding of analog, digital, and microprocessor circuits fundamentals - Knowledge of Mentor Schematic and Layout tools - Dx Designer, Hyper lynx DRC, Hyper lynx SI - Practical experience in analysis and troubleshooting - Strong written and verbal communication skills - Electronics component selection - Analog and digital circuit design and schematic entry - Circuit analysis for tolerance, power, thermal, and worst-case scenarios - Discuss layout guidelines and interface with layout engineer for implementation - Board bring up and testing - Support technical decision-making on design and implementation during product hardware development - Electronics component selection - Analog and digital circuit design and schematic entry - Circuit analysis for tolerance, power, thermal, and worst-case scenarios - Discuss layout guidelines and interface with layout engineer for implementation - Board bring up and testing - Support technical decision-making on design and implementation during product hardware development

Job Title: SMT Production Engineer Designation : Engineer Company: Hitachi Astemo Gurugram Powertrain Systems Pvt. Ltd. Noida, India Salary: As per Industry Company Overview: Hitachi Astemo Gurugram Powertrain Systems Pvt. Ltd. provides clean engine management systems with improved thermal efficiency that help reduce the environmental impact, as we'll as electric powertrain systems that combine high environmental friendliness with driving performance. Supports the creation of environmentally friendly automobiles with small, lightweight, and highly efficient motors for electric vehicles, inverters that boast world-class output density, and electronic control systems that detect the remaining battery charge in electric and hybrid vehicle drives with high precision and optimize control. Job Roles Responsibilities: 1. Production Progress Control- At the time of production delay, think of recovery plan/instruct accordingly. 2. Manpower Management(Engineer Management)- Examination/ Work Distribution to all reportees staff and Manage workload distribution, Instruction to line staff management. 3. Quality Management- When a quality defect occurs, investigate the cause, and implement countermeasures. 4. Management Work(OEE Control , CT Management, PPM Control Management) - Reporting to top management, Gemba Progress information to top management, Weekly report , HOD Report summarization. 5. SAP Management Work - Inventory management of Child part, Finish part and yearly inventory control management. 6. Kaizen Activity Management Staff motivation for providing Kaizen to achieve target, Safety Management at Gemba area. Skills: Communication Skill Process Optimization Skill Problem Solving Skill Presentation Skill. Experience: 3-5 Years Education: B. Tech (Electronics / Electrical / Mechanical) with same experience.

The opportunity: Hitachi Energy is a world leader that is advancing a sustainable energy future for all. We are advancing the world s energy system to be more sustainable, flexible, and secure, and we collaborate with customers and partners to enable a sustainable energy future - for today s generations and those to come. The Hitachi Energy Indian Operations Center (INOPC) is a competence center with around 3000+ skilled engineers who focus on tendering, engineering, planning, procurement, project Management, functional system testing, installation supervision, documentation and commissioning. Howe'ver, over the last decade, it has evolved to become the largest Operations hub. The India Operations Centre team at Chennai, Bangalore and Gurugram supports Hitachi Energy s units in more than 40 countries across a wide portfolio of all the four business units in Hitachi Energy to date, the team has executed engineering and commissioning for projects in more than 80 countries How you'll make an impact: You will be a part of the GIS Primary Offer Engineering team. You will be supporting the Sales Tendering engineers to develop Tender specific engineering documents and drawings for calculating right cost and drawings submission to customer as part of offer documentation. This role complete involved in Primary Engineering of Gas Insulated Switchgears (GIS) of transmission and sub-transmission systems. You will be an individual contributor who would deliver the tasks as per the given inputs and when required need to work in coordination with other colleagues and should exhibit good collaborative skills to complete the task. You may also interact with other departments like Secondary engineering, Steel structure engineering, Project Management and Production units. Preparation of drawings and documents for customer submission for Gas Insulated Switchgear above 66kV. The major deliverables are listed below, but not limited to Gas SLD, GIS Lay out, cable tray layout, earthing layout, Cabling overview and assembly overview. System resistance, Thermal loss, Gas volume, Earthing mat and Cable calculations Bill of material calculation Preparation of cost estimation based on the BOM generated. Self-review review of peer s documents Coordinating with the other team members, Sales Support engineers Area sales Managers Strong in Design to value (DtV) and preparation on optimized solutions considering customer requirements. Directly responsible for maintaining and updating the documentation for respective projects / Tenders as per quality process. Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your Background: B. E in Electrical Electronics Engineering/Equivalent. Years of experience: 3 - 8 years tendering or design of LV, MV, HV or EHV products Good knowledge in CAD tools (AutoCAD, Creo/Equivalent). Good knowledge about substations. Familiarity with standards like IEC, IEEE, ANSI etc will be an added advantage Team player, able to handle requests with short timelines and prepare solutions on time. Proficiency in both spoken written English language is required. .

The opportunity: Hitachi Energy is a world leader that is advancing a sustainable energy future for all. We are advancing the world s energy system to be more sustainable, flexible, and secure, and we collaborate with customers and partners to enable a sustainable energy future - for today s generations and those to come. The Hitachi Energy Indian Operations Center (INOPC) is a competence center with around 3000+ skilled engineers who focus on tendering, engineering, planning, procurement, project Management, functional system testing, installation supervision, documentation and commissioning. Howe'ver, over the last decade, it has evolved to become the largest Operations hub. The India Operations Centre team at Chennai, Bangalore and Gurugram supports Hitachi Energy s units in more than 40 countries across a wide portfolio of all the four business units in Hitachi Energy to date, the team has executed engineering and commissioning for projects in more than 80 countries How you'll make an impact: You will be a part of the GIS Primary Offer Engineering team. You will be supporting the Sales Tendering engineers to develop Tender specific engineering documents and drawings for calculating right cost and drawings submission to customer as part of offer documentation. This role complete involved in Primary Engineering of Gas Insulated Switchgears (GIS) of transmission and sub-transmission systems. You will be an individual contributor who would deliver the tasks as per the given inputs and when required need to work in coordination with other colleagues and should exhibit good collaborative skills to complete the task. You may also interact with other departments like Secondary engineering, Steel structure engineering, Project Management and Production units. Preparation of drawings and documents for customer submission for Gas Insulated Switchgear above 66kV. The major deliverables are listed below, but not limited to Gas SLD, GIS Lay out, cable tray layout, earthing layout, Cabling overview and assembly overview. System resistance, Thermal loss, Gas volume, Earthing mat and Cable calculations Bill of material calculation Preparation of cost estimation based on the BOM generated. Self-review review of peer s documents Coordinating with the other team members, Sales Support engineers Area sales Managers Strong in Design to value (DtV) and preparation on optimized solutions considering customer requirements. Directly responsible for maintaining and updating the documentation for respective projects / Tenders as per quality process. Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your Background: B. E in Electrical Electronics Engineering/Equivalent. Years of experience: 3 - 8 years tendering or design of LV, MV, HV or EHV products Good knowledge in CAD tools (AutoCAD, Creo/Equivalent). Good knowledge about substations. Familiarity with standards like IEC, IEEE, ANSI etc will be an added advantage Team player, able to handle requests with short timelines and prepare solutions on time. Proficiency in both spoken written English language is required. .

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager Assist in the compilation and delivery of monthly engineering status reports Participate in and contribute to design reviews Represent the discipline in the project engineering coordination meetings Prepare and/or review project procedures, standard specifications and design criteria Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects Perform conceptual and detailed engineering design Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc) where required Provide and/or coordinate training for resources assigned to the project Work to ensure the implementation of safety in design Ensures measurement of progress on all contracts for reporting and progress claim purposes. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership Support technology team/ Project team for development and automation works as required. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. Manage performance data of reportees and provide periodic feedback. Provides resource loading forecast to TL. Keeps records of learning s during the project and provides inputs to PM during job closure report. Prepare technical specifications/ bid evaluation/ technical recommendation where required Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE) WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required Facilitate the sharing of technical expertise across projects including archival of project documents. Provide and/or participate in training for resources assigned to the project Perform conceptual layout work Develop design details, prepare / extract drawings and check the deliverables prior to release Ensure coordination with engineers within the discipline and with other disciplines Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any Participate in formal engineering review processes Review vendor drawings and documents including archival and inputs to other disciplines Represents the discipline during site visit / client meetings as felt necessary by PE/PM. Support technology team/ Project team for development and automation works as required.

Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required Facilitate the sharing of technical expertise across projects including archival of project documents. Provide and/or participate in training for resources assigned to the project Perform conceptual layout work Develop design details, prepare / extract drawings and check the deliverables prior to release Ensure coordination with engineers within the discipline and with other disciplines Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any Participate in formal engineering review processes Review vendor drawings and documents including archival and inputs to other disciplines Represents the discipline during site visit / client meetings as felt necessary by PE/PM. Support technology team/ Project team for development and automation works as required.

Role & responsibilities Retired Technocrat having rich experience in R& M Consultancy of Power Plant (PP) / Preparation of Bankable DPR, Cost Benefit analysis ,. to lead the R& M/ Consultancy Team Preferred candidate profile Key Responsibilities Responsible for successful handling of all R&M Consultancy as well as other consultancy (ESP, BOP, CHP) Project IN Power Plant. Responsible for R& Consultancy Business, P& L of his division. Liaison with customer/ Electricity regulating bodies like CEA for all technical and commercial matters. R& M Consultancy of Thermal Power Plant / Preparation of Bankable DPR, Cost Benefit analysis. He/she has Business Analyst in-charge of the division. Shareholder management. Market analyst R& Consultancy Business unit. Having knowledge of creating reports for a R&M Consultancy business is essential. 15+ Years of Experience in Thermal Power Plant Including At least minimum six Years with reputed consultant which involved in R& M Consultancy of Thermal Power Plant / Preparation of Bankable DPR, Cost Benefit analysis. Good knowledge of RLA, CA of TPP, Water Audit, Performance Testing, Steam Path Audit Energy Audit, of BTG and BOP Areas. Good knowledge of Consultancy of RLA /CA., PGT , BOP, ESP, CHP and R& M technique of Power plant