137 Thermal Engineering Jobs - Page 2

Role: Electric Vehicle Thermal Management System Engineer Essential: B.E / B. Tech in Mechanical Engineering/ Electrical Engineering/ Electrical Electronics/ Electronics Communication Minimum 60 % marks Desirable: M.E / M. Tech in Control Systems / Thermal Engineering and project work related to Electric Vehicle / Hybrid Electric Vehicle. Responsibilities: Define the system diagram of the EV for thermal system Define the controller architecture, interfaces (electrical and physical), and functions for thermal management system of EV Define the detailed requirements for EV thermal system controls Perform system simulation sizing for EV thermal system Develop the thermal management controller functions and software, including logic development, MIL evaluation, HIL evaluation and vehicle level validation using MBD approach Develop diagnostics for thermal controllers Implement ISO 26262 functional safety requirements Functional Testing, System/part benchmarking, and database creation Working with stakeholders within the organization and outside (suppliers, consultants) for above development Technical/ Functional: Working experience of system and controls for automotive (ICE/xEV) thermal management system and/or HVAC System Experience of Thermal Simulation in Matlab/Simulink or any other tool Experience of Model Based Design with Matlab Simulink/State flow Experience in testing at controller level (HIL) and vehicle level Exposure to appropriate Regulations and Standards of HEV/EV such as AIS 038, AIS 102, AIS 048 and AIS 084 etc. ECU testing, excellent electrical/electronic troubleshooting skills Knowledge of ISO 26262 Behavioral Proactive, takes initiatives and should have good problem-solving skills Open to constantly learn, un-learn re-learn Motivate team with proper delegation through effective mentorship Envisage change adapt swiftly to advancements Vision for future through foresight of the industry/consumer trends Should be open to posting anywhere as per the job requirement

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager Assist in the compilation and delivery of monthly engineering status reports Participate in and contribute to design reviews Represent the discipline in the project engineering coordination meetings Prepare and/or review project procedures, standard specifications and design criteria Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects Perform conceptual and detailed engineering design Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required Provide and/or coordinate training for resources assigned to the project Work to ensure the implementation of safety in design Ensures measurement of progress on all contracts for reporting and progress claim purposes. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership Support technology team/ Project team for development and automation works as required. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. Manage performance data of reportees and provide periodic feedback. Provides resource loading forecast to TL. Keeps records of learning s during the project and provides inputs to PM during job closure report. Prepare technical specifications/ bid evaluation/ technical recommendation where required Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Technical Knowledge Quality of Work Plans and Aligns

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager Assist in the compilation and delivery of monthly engineering status reports Participate in and contribute to design reviews Represent the discipline in the project engineering coordination meetings Prepare and/or review project procedures, standard specifications and design criteria Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects Perform conceptual and detailed engineering design Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required Provide and/or coordinate training for resources assigned to the project Work to ensure the implementation of safety in design Ensures measurement of progress on all contracts for reporting and progress claim purposes. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership Support technology team/ Project team for development and automation works as required. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. Manage performance data of reportees and provide periodic feedback. Provides resource loading forecast to TL. Keeps records of learning s during the project and provides inputs to PM during job closure report. Prepare technical specifications/ bid evaluation/ technical recommendation where required Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Action Oriented Manages Complexity Technical Knowledge Quantity of Work Knowledge

"Jobs and careers with Buro Happold - Got a flair for the complex? We re hunting for a Graduate Mechanical Engineer with an understanding of detailed engineering design to join our outstanding Bengaluru-based team Here at Buro Happold, expect the exceptional From the projects you will work on to the clients we work with From career-defining opportunities to an inclusive and diverse practice where we all contribute to a more equitable world From our reputation to our relationships Wherever your Buro Happold career takes you, it ll be anything but ordinary Your next roleUndertake detailed engineering design Plan and help manage CAD & REVIT documentation of design work Work closely with and monitor the performance of the Technician (as appropriate) Under the guidance of senior staff, represent Buro Happold at meetings with the client, other professionals, and suppliers Ensure service and project work are carried out within agreed deadlines and within budget Ensure that appropriate service/design decisions are met Ensure senior staff are kept informed of important and relevant service/design decisions, and the objectives of the company and the client are achieved Coordinating his/her work with other members of the project team Ensuring all relevant Buro Happold staff are informed of client matters Continually ensuring that practices, policies, strategy, and services represent the client s and Buro Happold s best interests and that Buro Happold policy is in keeping with current legislation, Indian Standards, and Codes of Practice, etc Ensure maintaining awareness of project budgets and raising any concerns regarding budgetary or financial issues Senior staff are kept informed of important and relevant service/design decisions Ensuring all necessary Buro Happold staff are informed of relevant client matters Responsible for planning, organising, and managing personal workload in order to meet deadlines in line with the managers requirements Proactively raising concerns regarding workload and the ability to meet deadlines Your skills and experienceBE with 2 years experience or MTech (Thermal Engineering) in Mechanical Engineering Ability to accept a degree of responsibility in a team-based organisation, combined with the ability to work independently Microsoft Office, specifically Excel (a detailed understanding, including the use of macros) Experience using common analysis software (including or similar to CSC Fastrak, TEDDS, ROBOT, ETABS, and SAFE) and willingness to quickly learn to use these analysis packages if required The applicant will need to have strong interpersonal and organisational skills Ability to propose multiple solutions to Clients and objectively summarise the benefits and shortfalls of each

About Us: Soul AI is a pioneering company founded by IIT Bombay and IIM Ahmedabad alumni, with a strong founding team from IITs, NITs, and BITS We specialize in delivering high-quality human-curated data, AI-first scaled operations services, and more Based in SF and Hyderabad, we are a young, fast-moving team on a mission to build AI for Good, driving innovation and positive societal impact We are seeking experienced AI TrainerMechanical Engineering with a minimum of 1 year of experience to join us in Hyderabad and contribute to impactful AI training projects Key Responsibilities: Create, review, and refine mechanical engineering problems, solutions, and technical explanations Evaluate AI-generated content across subjects like Thermodynamics, Fluid Mechanics, Strength of Materials, and Machine Design Debug and improve errors in AI reasoning, calculations, and technical logic Collaborate on training and fine-tuning large language models using RLHF techniques Required Qualifications: 1+ year of experience in Mechanical Engineering (Academia, Industry, Teaching, or Content Creation) Strong conceptual knowledge in core subjects such as Mechanics, Dynamics, Heat Transfer, and Manufacturing Ability to assess and enhance AI-generated technical content Familiarity with academic, GATE, or industry-level engineering content is a plus Why Join Us Work in a competitive environment Hands-on experience working on real-world AI training tasks Competitive stipend (Rs 25,000- 35,000) Shape the future of AI with Soul AI!

Skills: SiC and GaN technologies, LTspice, PSpice, MATLAB/Simulink, PCB design, Electromagnetic Compatibility (EMC), Switching power supply design, ANALOG and DIGITAL circuit design, Job Summary We are seeking a Power Electronics Engineer to design and develop high-frequency, high-voltage power supplies and high-capacity power sources (a few kW to hundreds of kW) for thermal and non-thermal plasma applications The engineer will work on efficient, intelligent, and high-performance power conversion systems, ensuring stability and reliability. Key Responsibilities Design and develop **high-frequency switching power supplies** for plasma systems. Develop **high-voltage power converters, inverters, and rectifiers** (IGBT, MOSFET, and SiC-based). Work on **resonant power converters, soft-switching techniques, and pulse power sources**. Optimize **power factor correction (PFC), efficiency, and thermal management**. Design **high-current, high-voltage DC and RF power supplies (10kW 500kW, up to 10kV+).** Implement **intelligent control algorithms** (digital control, microcontrollers, DSP, FPGA). Develop **feedback and protection circuits** to ensure safe plasma operation. Collaborate with **plasma scientists, thermal engineers, and system integrators**. Conduct **EMI/EMC analysis and compliance testing** for industrial plasma power sources. Qualifications & Experience **B.E./B.Tech/M.E./M.Tech in Power Electronics, Electrical Engineering, or related field**. **3+ years of experience** in designing **high-frequency high-voltage power systems**. Proficiency in **power electronics circuit design, PCB layout, and simulation tools** (LTSpice, PLECS, MATLAB, ANSYS, etc.). Experience with **IGBT, MOSFET, SiC, and GaN-based power electronics**. Hands-on experience with **high-voltage insulation techniques and safety measures**. Strong knowledge of **resonant power supplies, pulse modulation, and inverter topologies**. Familiarity with **thermal management strategies (liquid cooling, heat sinks, etc.)**. Experience in **PLC, DSP, FPGA, and microcontroller-based power system control**. Preferred Skills Experience in **RF and microwave power systems for plasma**. Knowledge of **grid integration of high-power sources**. Hands-on experience in **industrial-scale plasma processing applications**.

Internship Profile: CAE Engineer (Online, Work from home) Research Project: 1. Subsonic Aircraft Internship 2. Electric Vehicles Internship Duration: 2 months (Online) (30 June 2025 to 22 August 2025) Last Date to Apply: 30 June 2025

Internship Profile: CAE Engineer (Online, Work from home) Research Project: 1. Subsonic Aircraft Internship 2. Electric Vehicles Internship Duration: 2 months (Online) (30 June 2025 to 22 August 2025) Last Date to Apply: 30 June 2025

Internship Profile: CAE Engineer (Online, Work from home) Research Project: 1. Subsonic Aircraft Internship 2. Electric Vehicles Internship Duration: 2 months (Online) (30 June 2025 to 22 August 2025) Last Date to Apply: 30 June 2025

Internship Profile: CAE Engineer (Online, Work from home) Research Project: 1. Subsonic Aircraft Internship 2. Electric Vehicles Internship Duration: 2 months (Online) (30 June 2025 to 22 August 2025) Last Date to Apply: 30 June 2025

Internship Profile: CAE Engineer (Online, Work from home) Research Project: 1. Subsonic Aircraft Internship 2. Electric Vehicles Internship Duration: 2 months (Online) (30 June 2025 to 22 August 2025) Last Date to Apply: 30 June 2025

Internship Profile: CAE Engineer (Online, Work from home) Research Project: 1. Subsonic Aircraft Internship 2. Electric Vehicles Internship Duration: 2 months (Online) (30 June 2025 to 22 August 2025) Last Date to Apply: 30 June 2025

Internship Profile: CAE Engineer (Online, Work from home) Research Project: 1. Subsonic Aircraft Internship 2. Electric Vehicles Internship Duration: 2 months (Online) (30 June 2025 to 22 August 2025) Last Date to Apply: 30 June 2025

Internship Profile: CAE Engineer (Online, Work from home) Research Project: 1. Subsonic Aircraft Internship 2. Electric Vehicles Internship Duration: 2 months (Online) (30 June 2025 to 22 August 2025) Last Date to Apply: 30 June 2025

Internship Profile: CAE Engineer (Online, Work from home) Research Project: 1. Subsonic Aircraft Internship 2. Electric Vehicles Internship Duration: 2 months (Online) (30 June 2025 to 22 August 2025) Last Date to Apply: 30 June 2025

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. About ExcelHer program: Are you looking for an opportunity to restart your career? Do you want to work with an organization that would value your experience no matter when you gained them? How about working with the best minds in the transportation industry where we need more women power? We are pleased to launch the ExcelHer program - the career returnship program at Volvo Group in India. The program is for women who have been on a career break for a year or more . This is our step towards empowering women to relaunch their professional journey after their absence from the workplace due to personal commitments. Exciting work assignments have been identified which you can refer in the list below. The assignment is for a tenure of 9 months . The participant of this program would have access to professional development programs, mentoring assistance by a business leader, apart from the experience of working with people from different functions/technologies/culture. If youre ready to seize this opportunity and align your experience with our career-defining assignments, we invite you to apply today. What s it like to work with Volvo Group? The Volvo Group culture is defined by a set of five carefully chosen values- Customer success, Trust, Passion, Change, and Performance. These values guide our day-to-day behavior and drive our decision-making at all levels of the organization. They express our shared beliefs across countries and entities to form the basis for a high-performing culture that can help maximize the full potential of the organization. Our company values help guide us on that journey. Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. About Us: Group Trucks Technology is the largest R&D wing of Volvo group. We are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you ll help enable talent to engineer exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Who are you? Are we a perfect match? To be successful in this position you need to be a collaborator and have an analytic mindset of a true analytical person. Take charge of engine development issues and offer suggestions to cross-functional teams. You will be part of a cross-functional and international environment, with English as a natural language for written and spoken communication. In order to excel in this position, it is essential to possess a collaborative spirit and an analytical mindset. You will be responsible for addressing engine development issues and providing recommendations to cross-functional teams. This role involves working within a cross-functional and international environment, where proficiency in written and spoken English is imperative. Requirement and Qualifications: Ph.D. in Combustion is preferred, with experience in numerical modeling and testing, particularly in the automotive, aerospace, or marine industries. OR ME/M.Tech/ in Mechanical/Automobile Engineering / Thermal engineering with 5-8 years of relevant experience in 3D/1D CFD simulation domain Strong proficiency in computational fluid dynamics (CFD) and various numerical simulation techniques Flow modelling experience in in-cylinder combustion will be plus but not mandatory Knowledge on python programming will be a plus Good understanding of Powertrain technology Excellent problem-solving skills and ability to work on tight deadlines in a dynamic environment. Be independent, pro-active, and continuously strive to improve. Good in presentation and communication skills Who we are and what we believe in We are committed to shaping the future landscape of efficient, safe, and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents across the group s leading brands and entities. Applying to this job offers you the opportunity to join Volvo Group . Every day, you will be working with some of the sharpest and most creative brains in our field to be able to leave our society in better shape for the next generation. We are passionate about what we do, and we thrive on teamwork. We are almost 100,000 people united around the world by a culture of care, inclusiveness, and empowerment. Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation.

Seeking an experienced Analog IC design engineer for developing complex analog mixed signal/ high precision analog ICs for Power, Isolation and Infrastructure applications. This person will work in a design group at the forefront of Powering the A.I., EV and Energy revolution, working to develop technologies that will revolutionize various end markets by enabling new levels of power efficiency. Responsibilities Architects, designs, and verifies circuits, systems, algorithms, etc. to meet product requirements. Develops innovative new designs for patenting or protecting as trade secrets. Reports on design results through design reviews and weekly status meetings. Attends design reviews to provide input and learn from other designer s work. Research design techniques through technical publications and seminars. Develops scripts needed for automating design verification and thoroughly verifies their work before closing the task out. Responsible for custom layout including overseeing the work of layout designers. Works on bench characterization of silicon as needed to prove block/chip performance and to find issues with silicon. Communicates with cross functional team as needed to make sure all the assumptions made during design process are vetted properly. Helps recruit and grow the team, contribute to team building activities. Job Requirements Educational Background B.Tech + 5 years experience M.Tech + 3 years experience PhD + 0 years experience Minimum Requirements Knowledge of MOS transistors and analog circuit design Knowledge of complex AC/DC analysis (poles, zeros, compensation), loop dynamics and feedback systems Knowledge of device physics and CMOS/BiCMOS fabrication processes. Previous design experience with complex analog and mixed signal design blocks. Knowledge in signals, systems and transforms. Understanding of the end to end design flow from product definition to high volume manufacturing Understanding of layout tradeoffs for performance and size Knowledge of circuit simulation tools, layout verification tools, modeling tools, and UNIX Additional Skills (one or more of these are highly desirable) Previous design experience with high precision current/voltage references, bandgaps, regulators, ring oscillators, level shifters etc Knowledge of high voltage processes and design in BCD and/or SOI type processes MOS Device modeling skills (noise, excess thermal noise, DIBL) Laboratory measurement skills System knowledge (e.g., isolators) and design skills in system modeling Understanding of mixed signal solutions including discrete time digital signal processing Good written and verbal presentation skills Job Segment: Design Engineer, Electrical Engineering, Thermal Engineering, Manufacturing Engineer, Fabrication, Engineering, Manufacturing

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. About ExcelHer program: Are you looking for an opportunity to restart your career? Do you want to work with an organization that would value your experience no matter when you gained them? How about working with the best minds in the transportation industry where we need more women power? We are pleased to launch the ExcelHer program - the career returnship program at Volvo Group in India. The program is for women who have been on a career break for a year or more . This is our step towards empowering women to relaunch their professional journey after their absence from the workplace due to personal commitments. Exciting work assignments have been identified which you can refer in the list below. The assignment is for a tenure of 9 months . The participant of this program would have access to professional development programs, mentoring assistance by a business leader, apart from the experience of working with people from different functions/technologies/culture. If youre ready to seize this opportunity and align your experience with our career-defining assignments, we invite you to apply today. What s it like to work with Volvo Group? The Volvo Group culture is defined by a set of five carefully chosen values- Customer success, Trust, Passion, Change, and Performance. These values guide our day-to-day behavior and drive our decision-making at all levels of the organization. They express our shared beliefs across countries and entities to form the basis for a high-performing culture that can help maximize the full potential of the organization. Our company values help guide us on that journey. . About Us: Group Trucks Technology is the largest R&D wing of Volvo group. We are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you ll help enable talent to engineer exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Who are you? Are we a perfect match? To be successful in this position you need to be a collaborator and have an analytic mindset of a true analytical person. Take charge of engine development issues and offer suggestions to cross-functional teams. You will be part of a cross-functional and international environment, with English as a natural language for written and spoken communication. In order to excel in this position, it is essential to possess a collaborative spirit and an analytical mindset. You will be responsible for addressing engine development issues and providing recommendations to cross-functional teams. This role involves working within a cross-functional and international environment, where proficiency in written and spoken English is imperative. Requirement and Qualifications: Ph.D. in Combustion is preferred, with experience in numerical modeling and testing, particularly in the automotive, aerospace, or marine industries. OR ME/M.Tech/ in Mechanical/Automobile Engineering / Thermal engineering with 5-8 years of relevant experience in 3D/1D CFD simulation domain Strong proficiency in computational fluid dynamics (CFD) and various numerical simulation techniques Flow modelling experience in in-cylinder combustion will be plus but not mandatory Knowledge on python programming will be a plus Good understanding of Powertrain technology Excellent problem-solving skills and ability to work on tight deadlines in a dynamic environment. Be independent, pro-active, and continuously strive to improve. Good in presentation and communication skills We value your data privacy and therefore do not accept applications via mail. Who we are and what we believe in We are committed to shaping the future landscape of efficient, safe, and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents across the group s leading brands and entities. Applying to this job offers you the opportunity to join Volvo Group . Every day, you will be working with some of the sharpest and most creative brains in our field to be able to leave our society in better shape for the next generation. We are passionate about what we do, and we thrive on teamwork. We are almost 100,000 people united around the world by a culture of care, inclusiveness, and empowerment. .

Markem-Imaje is a trusted world manufacturer of product identification and traceability solutions, offering a full line of reliable and innovative inkjet, thermal transfer, laser, print and apply label systems. Markem-Imaje delivers fully integrated solutions that enable product quality and safety, regulatory and retailer compliance, better product recalls and improved manufacturing processes. Markem-Imaje is a trusted global manufacturer of product identification and traceability solutions. Our connected solutions help manufacturers to reduce waste, increase efficiency, achieve compliance and protect their brand. We offer the most complete range of market-leading marking and coding systems along with software, services and consumable solutions so you can streamline all your printing needs from one supplier. The Role The Technical Service Engineer is responsible for performing on-site installation, maintenance, service repair and support for Markem-Imaje products and services. What you will do: The engineer has to provide on site service and customer support study different type of packaging machines and site readiness for printer installation. Conduct onsite (online) printer trial Perform on-site product installation on customer premises. He shall be responsible for on- site services such as Installation Maintenance of Markem products to ensure maximum up-time and customer satisfaction. He needs to meet service spares budget for assigned geographical territory. Job requires travelling to manufacturing facilities of Markem customers What you need to have: The engineer must have 3 - 5 years of hands on experience in on site service and customer support of capital goods relating to industrial automation. He must be Graduate with Degree in Electrical/Electronics/ BSc (maths/Physics) with at least 60% marks from reputed college. Good organizational skills and ability to set priorities and manage time effectively. Good level of customer relationship management skills. Candidates applying for this position must have own vehicle that can be used for business travel purpose. You ll only be the right candidate if you are aligned to our values and culture: Collaborative entrepreneurial spirit Winning through customers High ethical standards, openness and trust Expectations for results Respect and value people Work Arrangement : Hybrid Salary Range : - We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position s responsibilities, a candidate s work experience, a candidate s education/training, the position s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Job Function : Customer Service Job Segment: Thermal Engineering, CRM, Manufacturing Engineer, Electronics Engineer, Engineering, Technology, Customer Service

BASIC QUALIFICATION : Educational Qualification : B.E / B.Tech Minimum Years of Experience Required : 6 to 8 Years Position/Designation : Based on the Experience Field of Experience : Pressure Vessels, Boilers, Heat Exchangers, Columns, Tanks JOB DESCRIPTION : - Candidate shall be Self-motivated Mechanical Engineer with experience in the field of Boiler & Pressure Vessels Engineering and hand on experience in the supervising of engineering design outputs - Candidate should have proficiency in engineering and calculations as per standards viz. IBR, ASME, TEMA, EN, ISO, Indian Standard etc. - Candidate shall be capable in Co-ordination with Proposal & Estimation team during pre-order stage. - Exposure in Proposal & Estimation Knowledge will be added advantage. - Candidate shall be capable in Co-ordination with Inter-discipline team such as Civil, Structures, Electrical & C&I to ensure the optimized engineering based on Project/Tender specification. - Candidate shall be capable in Handling and Monitoring the Design team by making micro-level planning to meet the project deliverable schedule. - Candidate shall attend the meetings with project managers, clients & consultants to get the approval for the engineering documents/drawings. - Candidate shall co-ordinate with procurement team to finalize the vendor packages by conducting technical bid evaluation according to Project/Tender specification/Purchase order requirement. - Hands on experience in preparing of Material forecast in line with Project/Tender specification/Purchase order requirement is must - Hands on experience in Basic Engineering as follows. - Boiler Thermal Design Calculation - Tanks/Vessels Sizing Calculation - Mechanical Strength Calculation - Material Selection - PV Elite Tool Knowledge is must - Auto Cad Tool Knowledge is required. - Hands on experience in Detail Engineering as follows - Boiler Pressure Parts, Non-Pressure Parts, etc. - Pressure Vessels & Storage Vessels Heat Exchangers : - Hands on experience in Review and Release of Fabrication Drawings ensuring compliance to codes, standards and project specification is must - Hands on experience in co-ordination with Site/Fabrication team to ensure the compliance of project execution as per Tender requirement - Proactive approach in problem solving is must - Candidate must have capable to make development/customization/standardization to reduce the project engineering time.

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

Purpose & Scope of Position The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

Job description We, ISOTEX Corporation Pvt. Ltd., are an internationally renowned thermal technology company that produces highly efficient low emission thermal oil heaters, steam boilers plants and combustion systems. We harness our expertise through experience gained from 40 years of operations and 8000 installations throughout the world. As a testimonial to our capabilities, we are repeated awarded as India's leading heater and boiler exporter by EEPC India. ISOTEX also provides complete design, development and installation of complete heating plant from scratch, start to finish on turnkey basis serving as single source vendor for customers. ISOTEX also undertakes integrated cogeneration systems, involving simultaneous generation of multiple energy sources viz power, heating and cooling. ISOTEX has executed number of EPC boiler and heater plants across the globe. Our expertise in Boiler and Heater plants that use a variety of fuels along with proven track record and timely execution with world class safety standards and reliable plant operations post commissioning, makes us the preferred EPC partner. We are having state-of the art modern manufacturing facilities spread over total area of 60,000 Sqm at various locations with ASME, PED, GoST, DOSH certifications. For more details on company profile you can refer www.isotexglobal.com We are in hiring spree of Autocad Design Engineer for our HO at Naroda, Ahmedabad who will be working for New Product Development Team (NPD) for developing various new concepts and design in AutoCAD / ZWCAD software as required.

Purpose Scope of Position The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity