83 Test Lead Jobs - Page 2

The opportunity Responsible for Configuration of IED s used in EHV Substations, Development of HMI s using vendor specific tools and testing of CRP and SAS of EHV substations (above 132kV Voltage level). Ensure that the Substation Automation Projects delivered by HEIL are configured as per the project requirements and tested, put into service on time, meeting highest HEIL quality and OHS standards. Meet or exceed the customer expectations in testing & configuration of IED in line with project requirements. How you ll make an impact As a testing and configuration engineer, carrying out the configuration of IED s, development of HMI s in line with project requirements and testing of Control and relay panels, Substation automation system delivered and actively contribute in the testing team of Grid Automation Systems. Execute the project IED s configurations and testing safely following all safety standards of HEIL as well as customer. Reports Hazards, Near Misses at working location back to office for records and further improvement. Ensure that customer relations are managed in an optimal way. Carryout the Configurations of IED s and testing the Control, Protection and SAS panels as per the documented process description and checklists. Continuous interactions with testing Lead and expert help to carry out the testing works effectively. Report the Configuration and testing project status testing progress & testing plan to testing Lead. Ensure efficient use of the testing assets like Test kits, Tools etc. Ensures project information of any project is fully taken from testing lead and get all IED s fully configured and tested in line with customer approved drawings and ready for the project specific testing activities before offering the projects to customer during FAT. Handing over the marked-up drawings to engineering for preparing the As-build drawing and onward submission to customer to close the project. Handover the final testing backup CDs, Micro SCADA system backup, IET workplace backup and other backup as per the checklist to lead. Actively and regularly (Compulsory for every project) provides feedback to Engineering Project Management, manufacturing and quality in way that ensures re-usage of experience. Follow the key process like Test procedures, Time sheets and STAART Meetings. Ensure the installed base numerical relays are maintained with minimum revisions by continuously updating the older revisions. Ensure the usage of the latest tools and latest software versions during project IED configurations and testing. Continuous learning & acquiring expertise in various protection schemes and Automation system to achieve the higher growth in learning curve . Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business Your background Candidate Should be a graduate in Electrical and Electronics engineering with relevant of a minimum of 3 years of experience in testing and commissioning of control and relay panels in projects above 132kV Voltage levels. Should have good knowledge on Power system. Should have hands on experience with 3 Phase injection test kits like Omicron, Doble, Megger, Ponova etc Should have good knowledge on understanding the schematics of control and relay Panels, primary equipment interlocks. Should be ready for frequent travels all over India and overseas wherever assigned for at least next 5 years. Should have e good knowledge on configuration of HEIL IED s and competitors IED s in line with project requirements Should have a minimum of 3 years of experience in commissioning of SAS with IEC61850 standards, IEC101, IEC104, OPC and Modbus protocols. Should have good knowledge on communication protocols listed above. Should have good knowledge on IEC61850 standards, Ethernet, Serial communications. Should have good knowledge on communication protocols such as Modbus, DNP 3. 0, IEC 101, IEC 104, OPC, Should have competency on networking, configuration of managed Ethernet switches. Should have hands on experience on Protocol analyzers like IEC browser and network analyzer tools like wire sharks. Proficiency in both spoken & written English language is required .

Analyze requirements or User Stories across products and applications to identify acceptance criteria, testing cases, and test scenarios. Provide feedback to the lead tester and manager regarding development and process optimizations. Work closely with multiple development teams to ensure quality testing practices are incorporated across the development cycle. Write test documentation such as test cases, and scenarios, create test data, and identify defects within the software products. Proactively initiate, develop, and maintain effective working relationships with team members Execute automated and manual test cases and provide a pass or fail documentation using the standard tools utilized by the team. Provide individual status reports to the test lead and manager at the required frequency.

UAT Coordination: Collaborate closely with the existing testing team, providing guidance and motivation to execute UAT cases efficiently Take ownership of UAT processes, ensuring alignment with project objectives, and offer support as needed Insurance Domain Knowledge: Deep understanding of core insurance workflows, including familiarity with applications like core application Sales, DMS, SFDC, Quote management, letter generation, batch processing, and day-end activities Daily Tracking and Reporting: Track and report daily testing metrics, including test case counts and productivity Proactively resolve challenges to maintain testing momentum and keep stakeholders informed of UAT progress and outcomes Risk and Issue Management: Identify potential risks and dependencies, taking pre-emptive actions to address issues that could impact project timelines Advocate for testing team readiness in risk assessments, ensuring project expectations are met Test Strategy and Execution: Design and implement comprehensive end-to-end (E2E) test scenarios, ensuring thorough coverage of business flow requirements for both new and migrated customer journeys Identify and coordinate test data needs across multiple integrated applications to support seamless testing execution Stakeholder Communication and Sign-Off: Act as a point of contact with business users, sharing test evidence and managing the sign-off process for completed testing Communicate UAT results clearly, ensuring transparency and reliability with stakeholders at all levels Continuous Improvement: Continuously monitor UAT processes and introduce improvements to enhance efficiency and accuracy Maintain a solution-focused approach, promoting a growth mindset within the testing team

Job Title: QA Lead Location: Pune Experience : 8 - 10 years The Opportunity: We are seeking a highly skilled and motivated QA Lead who is also a hands-on individual contributor to join our dynamic engineering team. In this pivotal role, you will be instrumental in ensuring the quality and reliability of our software, integrations with Teamcenter and various CAD applications. You will drive the QA strategy, execute tests, and continuously seek innovative ways to optimize our testing processes. What You'll Do: Lead QA Strategy & Planning: Develop and implement comprehensive test plans and strategies for new features, integrations, and releases. Collaborate closely with product management, development, and other stakeholders to understand requirements, define test scope, and align on quality gates. Estimate QA efforts and resources, and effectively communicate project status and risks. Continuously seek and implement innovative approaches to reduce the overall QA cycle time without compromising quality. Automate most of the manual testing Individual Contributor - Hands-on Testing: Design, develop, and execute detailed test cases for both manual and automated testing, focusing on integration scenarios with Teamcenter, various CAD (e.g., SolidWorks, Creo, NX, AutoCAD) and other software. Perform functional, regression, performance, and usability testing. Identify, document, and track defects with clear, concise, and reproducible steps. Conduct thorough root cause analysis of defects and collaborate with development to resolve issues. Set up and maintain test environments. Team Collaboration & Mentorship: Act as a subject matter expert for QA best practices and testing methodologies. Share knowledge and provide guidance to other team members. Contribute to the continuous improvement of our QA processes, tools, and infrastructure. Quality Assurance & Reporting: Ensure adherence to quality standards and best practices throughout the software development lifecycle. Generate comprehensive test reports and provide clear metrics on product quality. Champion a culture of quality within the team. What You'll Bring: Bachelor's degree in Computer Science, Engineering, or a related field. 8 to 10 years of experience in Software Quality Assurance, with a significant portion in a lead or senior individual contributor role. Proven hands-on experience testing integrations with PLM systems, specifically Teamcenter. Strong understanding and hands-on experience testing with various CAD software (e.g., SolidWorks, Creo, NX, AutoCAD) and their integration points. Expertise in designing, developing, and executing automated tests. Excellent analytical, problem-solving, and debugging skills. Strong written and verbal communication skills, with the ability to articulate complex technical issues clearly. Proactive, self-motivated, and able to work independently as well as collaboratively within a team. A passion for quality and a relentless drive to deliver robust and reliable software.

Lead a team of automation engineers in the design, development,implementation of automated test scripts. Monitor test automation progress,communicate status to stakeholders in a timely manner. Identify opportunities for automation improvements. Required Candidate profile Define, implement,maintain automated testing strategies frameworks for different types of testing functional, regression,performance Collaborate to understand requirements ensure proper test coverage Perks and benefits To be disclosed post interview.

Experience Require in IT field Prepare test cases for module, integration and system testing Prepare and execute test data and test cases Defect / Bug / Error Tracking Giving mandatory information of a defect / Bug / Error to developers in order to fix it Communication with the Test Lead / Test Manager Prepare testing technique reports Knowledge of Automation Test Strong verbal and written communication skills Problem solving skills Technical Skill The ability to work under pressure. Attention to detail. Competent technical skills Ability to work in a team and individually Organizational skills with the capability of working towards tight deadlines Passion for technology Profile Summary.

You ll be our Software Testing Lead - HMI/Platform You ll be based at IBC Knowledge Park, Bengaluru You ll be aligned with Lead - Software Testing You ll be joining our Product Validation Group As a Software Testing Lead (HMI/Platform) you will be an integral part of the Product Validation Team where you will play a key role in leading the HMI/Platform software testing team and be responsible for ensuring a high quality of software delivery through the introduction of robust testing methodologies. At Ather, we take pride in ushering the Indian EV movement forward, and we continue to do this by building from scratch. The best part is that we re just getting started. So, if you believe in taking moonshots, join us. Be the story. What you ll do at Ather Demonstrate technical leadership by applying robust testing methodologies through a disciplined approach of quality first mindset Ensure testing is performed individually and by the team at all levels (regression, end to end, system etc) for each release cycle Define, implement and maintain detailed test plans, test cases and procedures through close collaboration with product and development teams Develop an in-depth technical understanding of the entire software platform ( AOSP, API, UI interaction ) to be able to root cause issues at the first level Identify and drive automation related activities through proactive automation planning and prioritization. Introduce and drive engineering best practices to initiate, plan, and execute large-scale, cross-functional, and company-wide critical programs. Provide technical mentoring to team members Ensure detailed and timely bug reporting and ensuring Jira sanity Here s what we re looking for Be obsessed about quality and customer satisfaction Experience with platform and kernel level testing such as AOSP, Linux In-depth understanding of application APIs and experience in testing them using manual and automation methods UI testing and automation either in desktop or mobile applications Experience in leading or mentoring a team Clarity in thought and communication when providing feedback Detail oriented who can find needle in a haystack Writing crystal clear test plans, test case and test procedures What you bring to Ather Any engineering degree with 7+ years of hands on application development and testing experience Experience in mentoring or leading a team Evidence of exceptional ability ",

Domain Skillset required : Finacle -We are looking for a highly skilled Test Manager Manual Testing to lead our QA team. The candidate will be responsible for designing test strategies, managing test execution, ensuring quality standards, and collaborating with development teams to deliver high-quality software solutions. Develop and implement test strategies, plans, and test cases for manual testing. Lead and manage a team of manual testers, ensuring effective test execution. Coordinate with developers, product managers, and stakeholders to understand requirements. Define and track test metrics to ensure high-quality product delivery. Identify, document, and track defects using test management tools. Conduct test case reviews and ensure test coverage aligns with business needs. Participate in requirement analysis and provide inputs for testability. Ensure compliance with industry best practices, quality standards, and regulatory requirements. Manage test environments and data for manual testing efforts. Drive continuous process improvements in manual testing methodologies. Team Lead, Finacle 10.2, Core Banking, Manual Testing

Description: Job Title: Test Lead Experience Level: 6+ Years (Preferred) Job Summary: We are seeking an experienced and strategic Test Lead to join our Agile team. The ideal candidate will have a strong background in test automation, a deep understanding of the software testing lifecycle, and a passion for ensuring high-quality software delivery. As a Test Lead, you will play a key role in leading the QA team, identifying issues, improving processes, and contributing to product innovation. Key Responsibilities: • Mandatory:- ISTQB certified profiles only Lead, mentor, and manage a team of QA engineers to ensure high-quality software delivery. • Design, develop, and execute automated test scripts using tools such as Python, Selenium, Robot Framework, or Playwright. • Participate in all phases of the testing lifecycle, including planning, execution, defect tracking, and reporting. • Utilize test management tools such as JIRA and Confluence to document test cases, track defects, and collaborate with team members. • Perform manual and automated testing to ensure the quality of software applications. • Conduct API testing (preferred) and integrate it into the automation suite. • Collaborate closely with developers, QA engineers, documentation teams, and product owners to understand requirements and ensure comprehensive test coverage. • Think from the users perspective to identify potential usability issues and ensure a seamless user experience. • Apply strong analytical skills to identify risk areas, estimate testing scope, and ask critical questions to improve product quality. • Continuously assess and improve testing processes and contribute to process improvement initiatives. • Stay updated with the latest testing tools, trends, and best practices. Required Skills & Qualifications: • Proven experience (6+ years preferred) as a Quality Assurance Tester or similar role. • Strong understanding of testing methodologies, defect management, and types of testing. • Hands-on experience with test automation frameworks and scripting in Python. • Familiarity with Agile methodologies and working in Agile teams. • Excellent problem-solving, communication, and collaboration skills. • Ability to work independently and as part of a cross-functional team. Nice to Have: • Experience with API testing tools (e.g., Postman, REST Assured). • Exposure to CI/CD pipelines and integration of automated tests. • Knowledge of performance or security testing is a plus.

Req ID: 327074 NTT DATA strives to hire exceptional, innovative and passionate individuals who want to grow with us. If you want to be part of an inclusive, adaptable, and forward-thinking organization, apply now. We are currently seeking a Test Lead- SDET to join our team in Noida, Uttar Pradesh (IN-UP), India (IN). Expertise in Core Java, Cucumber JVM, POSTMAN, Git, Selenium Hands on SQL Query, Jenkins & Bitbucket, Knowledge of - Data Modelling (Classification & Regression) Preferrable: Data Modelling experience Minimum 10 Year of experience - 5 yrs of Automation hands on experience is mandatory Software Developer in Test, who is an exceptional coder crack technical challenge/bottlenecks. Have experience in writing test cases ( Technical & Functional) Interact with functional & Automation test team, analyse test/acceptance criteria and derive test feasibility report. Hands-on expertise in Rest-assured, Selenium, Cucumber JVM & Jenkins. Automation script development of assigned modules. Understanding/Usability document of complex/important technical component around test automation. Involved in 50% testing (Functional & Automation), 50%(Documentation & Reporting) Lead the Automation script development, tools setup/configuration, execution, analysis and report the Plan Perform/co-ordinate Automation POCs Generate Test Automation Execution report using inhouse Cucumber Framework. Execute test suite in CI/CD Pipeline Hands on experience in Confluence & Jira

The opportunity Responsible for Configuration of IED s used in EHV Substations, Development of HMI s using vendor specific tools and testing of CRP and SAS of EHV substations (above 132kV Voltage level). Ensure that the Substation Automation Projects delivered by HEIL are configured as per the project requirements and tested, put into service on time, meeting highest HEIL quality and OHS standards. Meet or exceed the customer expectations in testing & configuration of IED in line with project requirements. How you ll make an impact As a testing and configuration engineer, carrying out the configuration of IED s, development of HMI s in line with project requirements and testing of Control and relay panels, Substation automation system delivered and actively contribute in the testing team of Grid Automation Systems. Execute the project IED s configurations and testing safely following all safety standards of HEIL as well as customer. Reports Hazards, Near Misses at working location back to office for records and further improvement. Ensure that customer relations are managed in an optimal way. Carryout the Configurations of IED s and testing the Control, Protection and SAS panels as per the documented process description and checklists. Continuous interactions with testing Lead and expert help to carry out the testing works effectively. Report the Configuration and testing project status testing progress & testing plan to testing Lead. Ensure efficient use of the testing assets like Test kits, Tools etc. Ensures project information of any project is fully taken from testing lead and get all IED s fully configured and tested in line with customer approved drawings and ready for the project specific testing activities before offering the projects to customer during FAT. Handing over the marked-up drawings to engineering for preparing the As-build drawing and onward submission to customer to close the project. Handover the final testing backup CDs, Micro SCADA system backup, IET workplace backup and other backup as per the checklist to lead. Actively and regularly (Compulsory for every project) provides feedback to Engineering Project Management, manufacturing and quality in way that ensures re-usage of experience. Follow the key process like Test procedures, Time sheets and STAART Meetings. Ensure the installed base numerical relays are maintained with minimum revisions by continuously updating the older revisions. Ensure the usage of the latest tools and latest software versions during project IED configurations and testing. Continuous learning & acquiring expertise in various protection schemes and Automation system to achieve the higher growth in learning curve . Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business Your background Candidate Should be a graduate in Electrical and Electronics engineering with relevant of a minimum of 3 years of experience in testing and commissioning of control and relay panels in projects above 132kV Voltage levels. Should have good knowledge on Power system. Should have hands on experience with 3 Phase injection test kits like Omicron, Doble, Megger, Ponova etc Should have good knowledge on understanding the schematics of control and relay Panels, primary equipment interlocks. Should be ready for frequent travels all over India and overseas wherever assigned for at least next 5 years. Should have e good knowledge on configuration of HEIL IED s and competitors IED s in line with project requirements Should have a minimum of 3 years of experience in commissioning of SAS with IEC61850 standards, IEC101, IEC104, OPC and Modbus protocols. Should have good knowledge on communication protocols listed above. Should have good knowledge on IEC61850 standards, Ethernet, Serial communications. Should have good knowledge on communication protocols such as Modbus, DNP 3. 0, IEC 101, IEC 104, OPC, Should have competency on networking, configuration of managed Ethernet switches. Should have hands on experience on Protocol analyzers like IEC browser and network analyzer tools like wire sharks. Proficiency in both spoken & written English language is required Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. .

5-7 Years of SF Service Cloud/Health Cloud Testing Experience US Healthcare Experience is required Agile Scrum experience is required Strong communication and ability to interact with US customers without assistanceEssential experience with building Test Automation frameworks (Cucumber, Selenium, Jenkins, BDD) and Automated Testing Strong delivery ownership Collaborate with stakeholders to understand application needs and objectives Participate in Agile ceremonies required for the project (daily stand-ups, sprint planning, backlog grooming, retrospectives, etc ) Demo the feature/story on sprint/release demos

You will be responsible for I will be responsible for the Business Acceptance testing (BAT) and Service Rehearsal testing ( SRT) activities for any Oracle & Zellis Work and Pay release including scope definition, testing and execution of the plan. Support the implementation of the Testing operating model for BAT & SRT in the Transformation programme Developing and leading a high performing team, giving them the opportunities to be their best Design & implement best in class testing practices Responsible for designing the Test approach for major & minor releases Identify & engage the appropriate business users (colleagues incl. Leadership teams) for testing Act as a voice of reason to reflect colleagues feedback on the product (in line with readiness for launch) Responsible for providing direction to critical quality gates prior to declaring the end solution (product) as ready to roll out Design & implement testing tools Engage other transformation teams, specifically Product & Technology areas to maximise results & reduce deviation Drive BAT & SRT activities from planning to execution Develop a sustainability plan for Payroll comparison activities post Work & Pay releases You will need Refer you will be responsible section About us Apply

5-7 Years of SF Service Cloud/Health Cloud Testing Experience. US Healthcare Experience is required. Agile Scrum experience is required. Strong communication and ability to interact with US customers without assistanceEssential experience with building Test Automation frameworks (Cucumber, Selenium, Jenkins, BDD) and Automated Testing. Strong delivery ownership. Collaborate with stakeholders to understand application needs and objectives. Participate in Agile ceremonies required for the project (daily stand-ups, sprint planning, backlog grooming, retrospectives, etc.) Demo the feature/story on sprint/release demos.

Join our dynamic team to navigate complex risk landscapes and fortify technology governance, making a pivotal impact in our firm s robust risk strategy. As a Compliance and Operations Risk Test Lead in the Testing Center of Excellence, you will play a pivotal role in enhancing our compliance and operational risk management. Your expertise in test execution will be crucial in managing and conducting precise and accountable tests, ensuring alignment with the firms highest risks. Your analytical thinking and problem-solving skills will be key in identifying control coverage gaps and driving remediation of control issues. You will also be responsible for planning and organizing your own work, and potentially that of a team, while liaising and coordinating activities across various departments. Your role will be integral in ensuring a cohesive and efficient testing framework, contributing to the seamless delivery of quality outcomes. Job responsibilities Conduct comprehensive testing processes, ensuring all activities are completed accurately and on time, while adhering to the firms highest risk priorities. Utilize advanced analytical thinking to identify control coverage gaps and verify that controls are properly designed and implemented. Apply problem-solving skills to address complex situations, develop alternate solutions, and interpret policies to ensure compliance with technical standards. Collaborate with cross-functional teams to align testing efforts and maintain open communication with stakeholders, ensuring effective execution of tasks. Continuously improve control evaluation methods and interpret control ratings and metrics to enhance the firms compliance and operational risk management. Required qualifications, capabilities, and skills 3+ years of experience in executing and managing testing processes within a professional or specialized field. Demonstrated proficiency in analytical thinking, with a track record of systematically organizing, comparing, and evaluating various aspects of a situation to identify key information. Proven ability to perform assessments of the control environment, identifying control coverage gaps and verifying the proper design and implementation of controls. Experience in coordinating activities across multiple departments, with the ability to adapt to changing priorities and manage a team if required. Proficiency in utilizing Project Management methodologies, tools, and techniques to lead and manage aspects of the project management lifecycle.

Automation Engineer with Python and Networking skillset Primary Responsibilities Responsible for understanding your areas wrt automation and work in its end-to-end customer context. Collaborate closely with your agile team, under the guidance of the Test lead and manager to solve problems and drive solutions. Implement automated and manual test cases to ensure maximum test coverage for platforms Define the Automation strategy along with the test lead and plan best suited for a given platform feature Work effectively both within a team and cross-functional team to drive identification and resolution of issues efficiently. Utilize your software design, analysis and programming skills to develop innovative automated test cases and tools to ensure maximum test coverage. Understand the quality life cycle to include: Automation planning, defect analysis and reporting. Effective bug reporting and documenting with ownership driven approach Demonstrate a deep understanding of software development process, demonstrated proficiency in designing Automated test cases and contributing to effective planning. Execute automated and manual tests on platform software and strong analytical skills that can determine root cause when a failure occurs. Knowledge, Skills and Abilities Strong Hands on experience wrt Automation Skills(Python) along with good knowledge of Networking concepts, with a minimum of 3 years test experience. Proficiency in Python Scripting and Object-Oriented Programming Concepts. Minimum of 3 years test automation experience with python is required. Experience in developing, setting up and working with complex test automation framework for parallel test execution on multiple platforms. Knowledge on Hardware clustering, High Availability and Failover systems. Strong understanding on Linux Operating system concepts and file systems. Working experience in Agile based software delivery models. Exposure to CI/CD tools is a plus. Preferably GIT CI/CD pipelines. Knowledge of IP networking: routing, switching, and network standards from layer 1 on up through the transport and application layers. Experience working with platform hardware at a low-level is a plus Creative and innovative problem-solving skills

PFB JD Number of Openings* 1 Total Yrs. of Experience* 10+ years Approx. vendor billing rate excluding service tax* 11000 Rupees / day ( not sure , whether it is excluding service tax or not) Precise Work Location* (E.g. Bangalore Infosys SEZ or STP) Hyderbad SEZ, Chennai Mcity SEZ ( other locations are also accepted) BG Check ( Before OR After onboarding) After onboarding Any client prerequisite BGV Agency* NA Is there any working in shifts from standard Daylight (to avoid confusions post onboarding)* Resource has to co ordinate with client / team @ onshore, So expectation is to work till 9.30 pm IST, resource can login around 10.30 in the morning. Role: Performance Testing Lead Years of experience: 10+ years Skill set: PT, Performance Engineering ,Jmeter, Load Runner, Kafka, DevOps CI/CD pipeline, Grafana, APM tool (Splunk, Dynatrace, Jprofiler), Exposure to Azure and GCP Cloud platforms Job description: 10-13 Yrs of experience in performance engineering, 3+ years leading end to end performance engineering delivery, driving innovation in PT space & managing stakeholder expectations Lead the end-to-end performance testing lifecycle including planning, scripting, execution, analysis, and reporting. Collaborate with architects, developers, and QA teams to define performance benchmarks and SLAs. Design and implement performance test strategies for web and backend systems. Identify performance bottlenecks and work with development teams to resolve them. Monitor and analyze system metrics (CPU, memory, I/O, etc.) during test execution. Provide detailed performance test reports and recommendations for improvements. Mentor and guide junior performance testers and ensure best practices are followed. Stay updated with the latest trends and tools in performance engineering. Analyze root causes of performance issues and identify areas for improvement

Lead QA delivery for large programs, manage test strategy, automation, and team development across projects. Required Candidate profile Senior QA leader with 12+ years’ experience in automation frameworks, test governance, and stakeholder collaboration.

Senior Cloud Test Engineer This role has been designed as Hybrid with an expectation that you will work on average 2 days per week from an HPE office. Who We Are: Hewlett Packard Enterprise is the global edge-to-cloud company advancing the way people live and work. We help companies connect, protect, analyze, and act on their data and applications wherever they live, from edge to cloud, so they can turn insights into outcomes at the speed required to thrive in today s complex world. Our culture thrives on finding new and better ways to accelerate what s next. We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good. If you are looking to stretch and grow your career our culture will embrace you. Open up opportunities with HPE. : Aruba is an HPE Company, and a leading provider of next-generation network access solutions for the mobile enterprise. Helping some of the largest companies in the world modernize their networks to meet the demands of a digital future, Aruba is redefining the Intelligent Edge - and creating new customer experiences across intelligent spaces and digital workspaces. Join us redefine what s next for you. What you ll do: Looking for a self motivated, solution finder, creative thinker and a seasoned IC - Test Lead / Senior Engineer with about 10+ years of hands-on experience in Networking and Security products with cloud and on-prem exposure. Hands-on experience and thorough understanding of core networking fundamentals, L2/L3 authentication methodologies like 802.1x, AAA and Radius, security domain like IPS/IDS, firewalls, crypto, VPNs and Deep packet inspection. Some core test responsibilities of writing solution based test plans, involve in design level reviews, building test topologies close to field, handling customer escalations and actively involved in delivering demos along with cross functional teams. What you need to bring: 10+ years of hands-on experience in Networking and Security products with cloud and on-prem exposure. Must have a good blend of technical leadership skills as well as a team player who can keep the team bonded and create an environment of healthy competition. Must be strong in scripting preferably - Python Certifications in security or related to cloud would be a plus. Well versed with Cloud fundamentals and hands-on exposure. Additional Skills: Cloud Architectures, Cross Domain Knowledge, Design Thinking, Development Fundamentals, DevOps, Distributed Computing, Microservices Fluency, Full Stack Development, Release Management, Security-First Mindset, User Experience (UX) What We Can Offer You: Health & Wellbeing We strive to provide our team members and their loved ones with a comprehensive suite of benefits that supports their physical, financial and emotional wellbeing. Personal & Professional Development We also invest in your career because the better you are, the better we all are. We have specific programs catered to helping you reach any career goals you have whether you want to become a knowledge expert in your field or apply your skills to another division. Unconditional Inclusion We are unconditionally inclusive in the way we work and celebrate individual uniqueness. We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good. Lets Stay Connected: Follow @HPECareers on Instagram to see the latest on people, culture and tech at HPE. #india #aruba Job: Engineering Job Level: TCP_03 HPE is an Equal Employment Opportunity/ Veterans/Disabled/LGBT employer. We do not discriminate on the basis of race, gender, or any other protected category, and all decisions we make are made on the basis of qualifications, merit, and business need. Our goal is to be one global team that is representative of our customers, in an inclusive environment where we can continue to innovate and grow together. Please click here: Equal Employment Opportunity . Hewlett Packard Enterprise is EEO Protected Veteran/ Individual with Disabilities. HPE will comply with all applicable laws related to employer use of arrest and conviction records, including laws requiring employers to consider for employment qualified applicants with criminal histories.

Join our dynamic team to navigate complex risk landscapes and fortify technology governance, making a pivotal impact in our firm s robust risk strategy. Job Summary As an Associate Compliance and Operations Risk Test Lead within the Testing Center of Excellence, you will play a pivotal role in enhancing our compliance and operational risk management. Your expertise in test execution will be crucial in managing and conducting precise and accountable tests, ensuring alignment with the firms highest risks. Your analytical thinking and problem-solving skills will be key in identifying control coverage gaps and driving remediation of control issues. You will also be responsible for planning and organizing your own work, and potentially that of a team, while liaising and coordinating activities across various departments. Your role will be integral in ensuring a cohesive and efficient testing framework, contributing to the seamless delivery of quality outcomes. Job responsibilities Conduct comprehensive testing processes, ensuring all activities are completed accurately and on time, while adhering to the firms highest risk priorities. Utilize advanced analytical thinking to identify control coverage gaps and verify that controls are properly designed and implemented. Apply problem-solving skills to address complex situations, develop alternate solutions, and interpret policies to ensure compliance with technical standards. Collaborate with cross-functional teams to align testing efforts and maintain open communication with stakeholders, ensuring effective execution of tasks. Continuously improve control evaluation methods and interpret control ratings and metrics to enhance the firms compliance and operational risk management. Required qualifications, capabilities, and skills 3+ years of experience in executing and managing testing processes within a professional or specialized field. Demonstrated proficiency in analytical thinking, with a track record of systematically organizing, comparing, and evaluating various aspects of a situation to identify key information. Proven ability to perform assessments of the control environment, identifying control coverage gaps and verifying the proper design and implementation of controls. Experience in coordinating activities across multiple departments, with the ability to adapt to changing priorities and manage a team if required. Proficiency in utilizing Project Management methodologies, tools, and techniques to lead and manage aspects of the project management lifecycle.

Join our dynamic team to navigate complex risk landscapes and fortify technology governance, making a pivotal impact in our firm s robust risk strategy. Job Summary As an Associate Compliance and Operations Risk Test Lead within the Testing Center of Excellence, you will play a pivotal role in enhancing our compliance and operational risk management. Your expertise in test execution will be crucial in managing and conducting precise and accountable tests, ensuring alignment with the firms highest risks. Your analytical thinking and problem-solving skills will be key in identifying control coverage gaps and driving remediation of control issues. You will also be responsible for planning and organizing your own work, and potentially that of a team, while liaising and coordinating activities across various departments. Your role will be integral in ensuring a cohesive and efficient testing framework, contributing to the seamless delivery of quality outcomes. Job responsibilities Conduct comprehensive testing processes, ensuring all activities are completed accurately and on time, while adhering to the firms highest risk priorities. Utilize advanced analytical thinking to identify control coverage gaps and verify that controls are properly designed and implemented. Apply problem-solving skills to address complex situations, develop alternate solutions, and interpret policies to ensure compliance with technical standards. Collaborate with cross-functional teams to align testing efforts and maintain open communication with stakeholders, ensuring effective execution of tasks. Continuously improve control evaluation methods and interpret control ratings and metrics to enhance the firms compliance and operational risk management. Required qualifications, capabilities, and skills 3+ years of experience in executing and managing testing processes within a professional or specialized field. Demonstrated proficiency in analytical thinking, with a track record of systematically organizing, comparing, and evaluating various aspects of a situation to identify key information. Proven ability to perform assessments of the control environment, identifying control coverage gaps and verifying the proper design and implementation of controls. Experience in coordinating activities across multiple departments, with the ability to adapt to changing priorities and manage a team if required. Proficiency in utilizing Project Management methodologies, tools, and techniques to lead and manage aspects of the project management lifecycle.

Genesys Contact Centre test experience Genesys WFM knowledge Contact Centre Reports testing experience is beneficial Omni Channel testing experience preferred i e Webchat, Email, Social Media Writing test scripts from designs, including call flow test cases from Visio Working knowledge of Jira, Excel, Word Able to work independently and as part of a team Ability to lead testing projects Ability to communicate effectively, including on customer facing calls

Overview Lead - Testing & Validation Responsibilities Design & process validation for all type of EM EGR. Basic knowledge of engine and its subsystem testing. Understanding of testing setup requirement of mechatronic components and EM EGR and Pneumatic EGR. Knowledge of mechanical testing setup and testing equipment\u2019s. Analysis of customer return parts and analysis. Support to application engineers to resolve customer queries. Mechanical Testing set up as per testing requirements. Analysis of customer returned samples & report generation Qualifications B Tech./ Diploma in Mechanical Engineering Essential skills Leakage measurements Flow Measurements Vibration Measurements Vibration data analysis Data acquisition & analysis Result Orientation Analytical Thinking Diagnostic Information Gathering Fostering Innovation Conceptual Thinking Experience Min Experience 6-7 yrs.

Test Automation (C#, JavaScript, SQL, API) - Test Lead Minimum 5 years of hands-on experience developing automated test scripts for UI and API tests. Proficient with test automation tools and technologies and knowledge of code logic to support the tools and tests. Ability to create automation scripts using C#, JavaScript and/or VB.NET, specifically developing functions, adding control flow logic, loopsetc. Strong SQL knowledge and understanding of relational DBs. Understand the importance of application code testing at the appropriate level (unit, interface, API, UX). Thorough understanding of Quality Assurance processes for software application testing. Thorough knowledge of designated testing tool suite such as HP Quality Center or Azure DevOps. Knowledge of Microsoft Office suite. Experience with leading project-based teams of testers. Experience in Selenium creating UI API test scripts. Experience with automated testing of application solutions hosted in Microsoft Azure and/or AWS. Experience with integrating test automation into continuous integration/continuous development functions. Strong knowledge of SQL. Must be a self-starter and able to work under minimal supervision. Ability to prioritize and be flexible in rearranging priorities across multiple projects and deadlines. High level of attention to detail.

ABOUT EVERNORTH: Evernorth exists to elevate health for all, because we believe health is the starting point for human potential and progress. As champions for affordable, predictable and simple health care, we solve the problems others don t, won t or can t. Our innovation hub in India will allow us to work with the right talent, expand our global footprint, improve our competitive stance, and better deliver on our promises to stakeholders. We are passionate about making healthcare better by delivering world-class solutions that make a real difference. We are always looking upward. And that starts with finding the right talent to help us get there. QA Lead Testing Analyst Position Overview In this role, you will provide hands-on QA and Testing Analysis for our Finance Delivery team. You will be working on Enterprise Level projects for several of the largest Technology initiatives for Evernorth targeted at revolutionizing Health Services and Healthcare Delivery system in the United States. The focus of the work is to continue to enhance our market winning capabilities in the Behavioral Health and Care Solutions space. This is a hands-on position with visibility to higher levels of the Finance Management Team who are motivated to see the successful results of our efforts. The solution focuses on enabling this change using the latest testing technologies and techniques including the use of AI and automation where appropriate. Responsibilities Develops detailed, comprehensive, and well-structured test cases based on functional requirements. Contributes to test planning and builds test cases per user story acceptance criteria. Builds and uses test data required to accomplish execution of test cases. Executes test cases, including manual and automated tests, and records test results. Tests new and existing features and reports errors. Works collaboratively with developers and systems analysts on defect triaging. Executes all levels of testing (Functional, Integration, Regression) through the project life cycle. Ensures that all the standards and processes are being implemented within a project. Validates the changes in Production once the Project goes live. Applies quality principles throughout the Agile product lifecycle/Kanban and waterfall life cycle with the appropriate support and documentation. Qualifications Required Skills: Possesses strong written and verbal communication skills with the ability to communicate with all levels in a manner that is understandable to business units. Is an action-oriented individual who has strong decision-making skills, self-motivated owner of multiple tasks and accountable to deliverables. Has the ability to maintain professionalism and emotional intelligence across all settings. Is a quick learner and is adaptable to new situations and challenges. Has experience working with globally distributed teams. Has proven experience as a Quality Assurance Tester using SQL, Database, and ETL technologies. Possesses expert knowledge in Data warehouse concepts. Can write complex SQL queries using Joins. Has experience with testing mainframe environment using File-aid and IBM DB2 applications. Has experience with automation testing concepts including using Python IDE tools, Gitlab and Jenkins. Required Experience Education: Has five + years of work experience. Has at least a bachelor s degree in computer science, Information Technology or related fields. Has experience in the Healthcare Domain. Desired Experience: Has worked with AI. Has worked with JIRA. Has worked with Zephyr. Location Hours of Work The location is in Hyderabad. The work hours are set at 40 hours per week. The work schedule is hybrid and is split between 3 days working in the office and 2 days working at home as per arrangements made with onsite management. Equal Opportunity Statement About Evernorth Health Services