801 Tekla Jobs - Page 7

Role & responsibilities Interpretation and Analysis : Thoroughly review and interpret architectural and structural engineering drawings, specifications, and design intent for metal components such as facades, canopies, railings, stairs, decorative elements, furniture and structural steel. Identify potential design conflicts, discrepancies, or missing information and proactively raise Requests for Information (RFIs) to architects, engineers, and project managers. Detailed Drawing Creation (Shop & Erection Drawings) : Create accurate and comprehensive 2D and 3D models and drawings of individual metal components and assemblies using industry-standard detailing software. Generate shop drawings that include all necessary dimensions, material specifications, welding details, bolt holes, and fabrication instructions for each piece. Develop erection drawings that illustrate the precise location, orientation, and connection methods for assembling fabricated components on-site, including sequencing and field work instructions. Incorporate details for connections, joints, and interfaces with other building materials (e.g., glass, concrete, masonry) to ensure seamless integration. Material Take-Offs and Bill of Materials (BOM): Prepare accurate Bills of Materials (BOM) for all required raw materials, hardware, and fasteners. Generate material take-offs to facilitate procurement and cost estimation. Compliance and Standards : Ensure all detailing work adheres to relevant industry standards and project-specific requirements. Perform quality checks on drawings to ensure accuracy, completeness, and adherence to design specifications. Collaboration and Coordination : Collaborate closely with architects, structural engineers, project managers, fabricators, and erectors throughout the project lifecycle. Participate in design review meetings and provide technical input to optimize the design for fabrication and constructability. Communicate effectively to resolve technical issues, design conflicts, and schedule challenges. Software and Technology Utilization : Proficiently use advanced Rhino/SolidWorks/Tekla/AutoCad/SketchUp software for modeling and detailing. Documentation and Record Keeping : Maintain proper documentation of all drawings, revisions, RFIs, and approvals.

Structural Engineering Scope of work Identify and review structural engineering deliverables to ensure completeness and compliance with the schedule, and report progress on engineering deliverables. Proactively plan and mobilize resources, and Coordinate with all stakeholders, such as clients, the detailed design team, yards, the construction team, etc. Participate/support detailed engineering and perform checks of structural engineering drawings and calculations/SACS/SESAM/Tekla/E3D models of the structural discipline of Topsides and Jackets for offshore wind platforms. Key Result Areas Review of MTOs for Structural bulk and specialty items; preparation of RFQ for Structural fabrication at the fabrication yard and RFQ for Offshore hook-up work. Ensure compatibility of the design with other engineering disciplines and ensure that the structural system design meets the requirements of the client/operability and regulatory organizations, etc. Raise service RFQs as per tender conditions. Responsible for Lifting, Rigging, Loadout, Transport & Installation conceptualization, RFQ preparation, Discussions with respective agencies Plan and Lead infrastructure development-related activities like workshops, including cranes, different types of Housings, Material Movements, etc. Technical Competencies Conversant with structural steel design and analysis, welding design, stiffened plate, Shell finite element analysis, and hydrodynamics loading using European codes, API, AISC, AWS, DNV, ABS, and other applicable codes and standards. Responsible for working within the provisions and guidelines of the quality assurance system relevant to the project, Responsible for personal safety and safe working practices for the project. Experience with Stressed skin construction of panels, units, and blocks of Ships & offshore topsides.

The Structural Engineer is responsible for the design, analysis, and evaluation of building and infrastructure structures to ensure their safety, strength, and durability. The role involves working closely with architects, civil engineers, and construction teams to create efficient structural systems that meet project requirements, comply with regulations, and align with budget and time constraints. Key ResponsibilitiesStructural Design & Analysis: Perform structural analysis and design for buildings, foundations, and infrastructure using concrete, steel, timber, and other materials. Develop structural plans, drawings, and specifications using CAD/BIM software. Evaluate load requirements, stress analysis, and safety factors to ensure code compliance and performance standards. Review and interpret architectural and engineering drawings and incorporate structural requirements. Collaborate with design teams to propose structural systems aligned with architectural intent and site conditions. Project Execution & Coordination: Provide technical guidance and solutions throughout the project lifecycle, from concept to construction. Coordinate with architects, MEP engineers, contractors, and clients to ensure proper integration of structural components. Conduct site inspections and structural assessments to verify construction adherence to designs and codes. Resolve design and construction issues by providing timely engineering solutions. Prepare and review structural reports, calculations, and compliance documentation. Regulatory Compliance & Quality Assurance: Ensure designs comply with local building codes, international standards, and relevant safety regulations (e.g., IS codes, Eurocodes, ACI, etc.). Conduct quality checks of drawings, calculations, and construction activities. Support the submission of designs to relevant authorities for approvals and permits. Maintain documentation for audit, review, and certification purposes. Skills and Qualifications Education : Bachelor’s or Master’s degree in Civil or Structural Engineering. Experience : 3–7 years of experience in structural design and engineering, preferably in residential, commercial, or industrial projects. Technical Proficiency : Design and analysis software: ETABS, STAAD.Pro, SAFE, SAP2000, Robot, or similar. Drafting tools: AutoCAD, Revit, Tekla Structures (preferred). Microsoft Office for reporting and documentation. In-depth knowledge of structural codes and standards. Strong understanding of construction processes, materials, and site requirements. Excellent analytical, mathematical, and problem-solving skills. Good communication and teamwork abilities. Desirable Attributes Professional licensure or certification (e.g., PE, SE, or equivalent) is a plus. Experience with high-rise or large-scale infrastructure projects. Familiarity with earthquake-resistant and wind-load design principles. Ability to handle multiple projects and meet tight deadlines. Detail-oriented with a commitment to safety and quality. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹45,000.00 per month Work Location: In person

iQuasar Software Solutions is a purpose-driven company with a strong emphasis on “People.” We operate to empower people in the community we operate in. Listen in to our HR Manager explaining the hiring process that helps us to make a change in society by bringing the best talent and helping them grow professionally. Structural Engineer – Mid-Level (Concrete Focus) Job Title: Structural Engineer – Mid-Level (Concrete Focus) Location : Remote/Srinagar J&K. Experience Level : 3–6 Years Industry: Structural Engineering (U.S. Projects) Role Overview We are seeking a skilled and motivated Mid-Level Structural Engineer with a strong focus on concrete structures to join our growing team. This role involves hands-on design and analysis for U.S.-based projects across sectors such as hospitality, residential, commercial, industrial, and infrastructure. You will collaborate closely with project leads and drafting teams to deliver high quality structural solutions. Key Responsibilities Structural Design & Analysis: Design and analyze concrete elements including retaining walls, podium slabs, mat foundations, shear/core walls, footings, columns, and beams. Software Modeling: Utilize tools such as TEKLA, ETABS, SAFE, STAAD, RISA, ADAPT, and Enercalc for structural modeling and analysis. Documentation & Coordination: Support the preparation of structural drawings, markups, and calculation packages. Collaborate with internal leads and respond to technical and client feedback. Code Compliance: Ensure all designs adhere to relevant U.S. codes including ACI 318, TMS, ASCE 7, and IBC. Qualifications Education : B.E./M.E. in Civil or Structural Engineering. Experience : 3–6 years of experience in concrete design for U.S. projects. Technical Proficiency: Structural software : TEKLA, ETABS, SAFE, STAAD, RISA, ADAPT, Enercalc Drafting tools: AutoCAD, Bluebeam Project Exposure: Experience with structural systems in hospitality, commercial, industrial, and residential sectors. Design Knowledge: Familiarity with seismic, wind, and foundation design principles WORK HARD AND BE YOURSELF Why Choose Us Leader’s Support Great Team Knowledge Sharing Health Insurance

iQuasar Software Solutions is a purpose-driven company with a strong emphasis on “People.” We operate to empower people in the community we operate in. Listen in to our HR Manager explaining the hiring process that helps us to make a change in society by bringing the best talent and helping them grow professionally. Structural Engineer – Mid-Level (Steel) Job Title: Structural Engineer – Mid-Level (Steel) Location: Remote/Srinagar J&K. Experience Level: 3–6 Years Industry: Structural Engineering (U.S. Projects) Role Overview: We are looking for a detail-oriented and technically skilled Mid-Level Structural Engineer with a strong focus on steel structures. This role supports the design and detailing of structural steel systems for U.S.-based projects across industrial, warehousing, commercial, and institutional sectors. You will work closely with design leads and CAD/BIM teams to ensure accurate, code compliant, and constructible solutions. Key Responsibilities Steel Design & Analysis: Design and analyze structural steel systems including pre-engineered buildings (PEB), hot-rolled steel, and cold-formed steel (CFS). Connection & Member Design: Perform member sizing, base plate design, and connection detailing using tools such as TEKLA, MAKPEB, RISA-3D, STAAD, and SAP2000. Modeling & Coordination: Collaborate with CAD/BIM teams to ensure constructability and accuracy of structural details. Prepare design markups, calculation packages, and respond to review comments. Code Compliance: Ensure all designs meet relevant U.S. standards including AISC, AISI, ASCE 7, and IBC. Qualifications Education: B.E./M.E. in Civil or Structural Engineering. Experience: 3–6 years of experience in steel structure design for U.S. projects. Technical Proficiency: Structural software: TEKLA, MAKPEB, RISA-3D, STAAD, SAP2000. Drafting tools: AutoCAD, Bluebeam. Project Exposure: Familiarity with steel systems used in industrial, warehouse, and commercial buildings. Preferred Skills: Understanding cold-formed steel (CFS) and connection design principles WORK HARD AND BE YOURSELF Why Choose Us Leader’s Support Great Team Knowledge Sharing Health Insurance

iQuasar Software Solutions is a purpose-driven company with a strong emphasis on “People.” We operate to empower people in the community we operate in. Listen in to our HR Manager explaining the hiring process that helps us to make a change in society by bringing the best talent and helping them grow professionally. Team Lead – Structures Job Title: Team Lead – Structures Location: Remote/Srinagar J&K Experience Level: 8+ Years (Steel & Concrete) Industry: Structural Engineering (U.S. Projects) Role Overview We are looking for a proactive and technically proficient Team Lead – Structures to co-lead a multidisciplinary team of Structural, CAD, and BIM engineers. This role combines hands-on technical leadership with project oversight, quality assurance, and client coordination. You’ll work closely with other leads to ensure the successful delivery of high-quality structural engineering solutions, primarily for U.S.-based projects. Key Responsibilities Team Leadership: Co-manage a team of 8–10 engineers and designers, fostering collaboration and continuous improvement. Project Oversight: Lead structural design efforts for steel (PEB/CFS) and concrete structures in compliance with U.S. codes. Technical Review: Guide and review work using tools such as TEKLA, RISA-3D, STAAD, ETABS, SAP2000, Enercalc, and Simpson CFS Designer. Quality Assurance: Oversee QA/QC processes, Quality reviews. Client Coordination: Serve as a key point of contact for clients, supporting project planning, resource allocation, and timely delivery. Prospect Queries: Attended all scheduled or unscheduled prospect meetings, Create Level of Efforts (LOE), Provide technical assistance to prospects. Training and Learning: Train team members on key skills, Draft the learning plan for the team members. Collaboration: Coordinate with different teams for project execution, Collaborate with sales, CSM teams. Qualifications Education: B.E./M.E. in Civil or Structural Engineering. Experience: Minimum 8 years in structural design (steel and concrete), on based U.S. projects WORK HARD AND BE YOURSELF Why Choose Us Leader’s Support Great Team Knowledge Sharing Health Insurance

Company Description Qpro Design Consultants Pvt Ltd is a boutique consulting firm specializing in Integrated Building Management Systems (IBMS), Mechanical, Electrical, and Plumbing (MEP), Sustainability consultancy, and Building Information Modeling (BIM). Our expertise lies in providing cutting-edge solutions to enhance the efficiency and sustainability of building projects. Job Description: Structural Draftsman cum BIM Modeller **Location:** Chennai or Navi Mumbai **Experience:** Minimum 5 Years **Employment Type:** Full-time About the Role We are seeking a highly skilled and experienced Structural Draftsman cum BIM Modeller to join our growing team in Chennai or Navi Mumbai. The ideal candidate will have at least 5 years of hands-on experience in structural drafting and 3D BIM modelling, particularly in infrastructure projects such as bridges, metros, and other transport-related structures. You will be responsible for preparing detailed drawings, reinforcement detailing, and bar bending schedules (BBS), working across both steel and RCC structures. Key Responsibilities · Prepare detailed structural drawings for bridges, viaducts, metro stations, and similar infrastructure. · Develop accurate 3D BIM models using industry-standard software such as Revit or Tekla. · Generate reinforcement detailing and bar bending schedules in accordance with project specifications and standards. · Coordinate with design engineers to understand and implement design intent. · Ensure compliance with relevant codes (IS, IRC, Eurocodes, etc.). · Maintain and update drawing records, logs, and revision history. · Assist in clash detection, quantity take-off, and documentation in BIM workflows. · Collaborate with multidisciplinary teams (structural, architectural, MEP) to deliver integrated models. Required Skills and Qualifications · Diploma or Degree in Civil / Structural Engineering or related field. · 5+ years of experience in structural drafting and BIM modelling for infrastructure projects. · Proficiency in AutoCAD, Revit, and preferably Tekla Structures or similar BIM tools. · Strong knowledge of reinforcement detailing and bar bending schedule (BBS) preparation. · Experience working with both RCC and steel structures. · Familiarity with BIM execution plans and workflows. · Ability to read and interpret structural and construction drawings independently. · Good communication and coordination skills. Preferred Background · Prior experience in metro rail, highway bridges, rail overbridges, or infrastructure EPC/consulting firms. · Understanding of BIM Level 2 standards and collaborative platforms like BIM 360. Work Location Chennai or Navi Mumbai (Candidates must be open to working in either location depending on project requirement.) Compensation Competitive salary based on experience and industry standards. If you are passionate about infrastructure and have the skills to bring detailed designs to life, we would love to hear from you.

You should have a good working experience to deliver the following outputs: Planning and assigning projects to the team. Micro planning of the daily activities considering the timelines of the project for the Designers. Input checks inline with the requirements of the project. Preparation of Technical queries if any. Structure detail modeling (including bevels & edge preparations) Assembly drawing/Fabrication drawing/Shop drawings. Part list, Profile sketches, Nesting, plate development. Weld traceability (Mapping drawing & Joint list). Expert in working on CADMATIC & Auto CAD software (Madate). Working experience on Software like Ship Constructor, Aveva Marine, Foran, & TEKLA preferable. Effective Coordination with internal & external team members. Improvement & Developments to be done in the projects assigned. Planning and responsibility of the assigned work. Qualification: B.E/B.Tech or Diploma Mechanical/Marine structures. Candidates with 8+ years of experience in detail design for offshore & shipbuilding industry. Desired profile of the candidate: Good Knowledge of detail design & modelling in various software is advantageous. Good analytical, planning, and reporting skills. Fluent in English (spoken and written).,

Company Description Steel Dimensions Inc. is a market leader in structural steel consulting services, operating from three locations and serving steel fabricators for over twenty years. We offer a comprehensive range of services, including design engineering, welding engineering, structural steel connection design, and structural steel detailing. Our commitment to providing innovative solutions has resulted in substantial repeat business and continuous growth. At Steel Dimensions Inc., we turn goals into reality. Role Description This is a full-time role for a Tekla Modeler, located on-site in Haripad. The Tekla Modeler will be responsible for creating detailed 3D models of structural steel components using Tekla software. Daily tasks include interpreting design drawings, developing accurate models, collaborating with engineers and project teams, and ensuring that all models meet the specified standards and project requirements. Qualifications Proficiency in Tekla Structures and 3D modeling software Experience in interpreting design drawings and specifications Strong understanding of structural steel detailing and connection design Effective communication skills for collaboration with engineers and project teams Attention to detail and commitment to quality Bachelor's degree in civil, structural engineering, or a related field is preferred Ability to work on-site in Haripad Experience in the steel fabrication industry is a plus

3d Modeling, Rebar Modeling, Drawing Generation, Bim Compliance, Clash detechtion, collaboration, Quality Control

3d Modeling, Rebar Modeling, Drawing Generation, Bim Compliance, Clash detechtion, collaboration, Quality Control

Role Description This is a full-time on-site role for a Tekla Detailer located in Tamil Nadu, India. The Tekla Detailer will be responsible for creating a 3d model & detailed steel fabrication drawings using Tekla software, ensuring adherence to AISC/CISC codes and standards. Daily tasks will include interpreting design documents, preparing detailed drawings, coordinating with engineers and project managers, and ensuring the accuracy and quality of the detailing work. The role will also require constant communication with the fabrication team to resolve detailing issues and ensure smooth project progression. Qualifications * Proficiency in Tekla software and experience with 3D Modelling & creating detailed steel fabrication drawings * Experience with drafting and connection design * Knowledge of estimation and quantity take-offs * Understanding of structural and miscellaneous steel detailing * Excellent attention to detail and problem-solving skills * Strong communication skills for effective coordination with team members * 2 to 4 years of relevant experience in steel detailing * Bachelor's degree/Diploma in Civil Engineering or related field is preferred * Familiarity with relevant codes and standards in steel detailing

Location: Pune Position: Rebar Modeler Experience: 2 - 5 Years Mode: On-site Qualifications: Diploma/BE/B.Tech (Civil) Background And Skills Good technical understanding of structures Experience in cast-in-place and precast reinforcement Hands-on experience in rebar modeling & detailing per Euro code (Germany & Sweden), ACI & British code Hands-on experience with AutoCAD, Tekla, and Revit is a must Please send your resume to careers@neilsoft.com with the job code in the subject line. Share the page email facebook twitter linkedin pinterest

Location: Pune Qualification: B.E. / B.Tech Experience: 8 - 10 Years Background & Skills Candidate should have 8 - 10 years of overall work experience Candidate should have extensive experience in Tekla Modeling, along with in-depth technical knowledge related to the Steel domain Candidate should have good communication skills Please send your resume to careers@neilsoft.com with the job code in the subject line. Share the page email facebook twitter linkedin pinterest

Location: Pune Qualification: B.E. / B.Tech Experience: 1 - 5 Years Background & Skills Candidate should have 1 - 5 years of overall work experience Candidate should have extensive experience in Tekla Modelling, along with in-depth technical knowledge related to the Steel domain Candidate should have good communication skills Please send your resume to careers@neilsoft.com with the job code in the subject line. Share the page email facebook twitter linkedin pinterest

Role Summary WSP India is currently seeking a Principal Engineer – Structures for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of structures in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power plant, Chemical process plant, Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Principal Engineer - Structures on mining projects. Prepare foundation, steel structure & concrete structure designs calculation in compliance with industry standards. Perform analysis and design using software like Space Gass, STAAD Pro, SACS, Tekla, E3D, or S3D. Solid understanding of Australian Standards (AS) and international codes. Coordinate with other engineering disciplines (piping, mechanical, electrical, instrumentation) for seamless project execution. Prepare civil and structural drawings, specifications, and design calculations. Calculate loads and select structural members based on forces and service demands. Design structural solutions for industrial, commercial, and institutional projects of various sizes with the main focus on industrial projects. Design of shallow and deep foundations, concrete piles, underground concrete vaults and tunnels, and slab reinforcement for a variety of loading conditions. Design of steel structures including building, additions, access platforms including ladder and stair details, trusses, two-legged bents and four-legged support towers. Develop a variety of structural connections including unique connections caused by field interferences. Verify field conditions, constructability of designs, and assist in resolving problems during field construction. Interpreting and designing from a variety of different domestic and foreign structural building design codes. Develop familiarity with WSP standard drawings, specifications, general practices, procedures, Client specific standards. Prepare reports, designs, and drawings. Redline drawings for CAD Designers and review updated submittals for accuracy. Establishing and maintaining effective working relationships with clients, contractors, suppliers and team members. Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Coordinating with Australian lead offices as per project requirement. Actively participate in the design and provide input to the design team throughout the design process. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in AU. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English (both written and verbal) communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 14-18 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing or site experience in steel, concrete structure. Ability to work in a fast-paced environment with strict deadlines. Effective leadership capability, coaching and mentoring skills Ability to work well as part of a team or on an individual basis. Qualifications 14-18 years of experience in structures engineering. Minimum of a bachelor’s degree in civil & preferred master’s degree in civil/structure engineering. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. C. Eng, P. Eng qualification would be an added advantage.

Location: Pune Position: Senior Cold Formed Steel Engineer - FrameCAD Designation/Role: Sr. Engineer Experience: 5 - 10 Years Role: Permanent Mode: On-site Qualifications: B.E / M.E (Civil) Background And Skills Background and Skills:Good technical understanding of structures Experience in CFS/LGS structure Familiar with American standards for CFS drafting Hands-on experience in software like FrameCAD Structure, FrameCAD Detailer, Autodesk Revit, FrameCAD Revlink Integration, Tekla Structures, etc. Ability to design cold-formed steel wall panels, floor panels, roof panels, ceiling panels, and roof truss using FrameCAD Coordinating to FrameCAD Detailers/Revit Modelers to arrange the presentation of shop drawings Familiar with F325iT, F450iT FrameCAD machine setups Good knowledge of steel detailing Ability to prepare structural and fabrication package as per the client requirements Ability to review engineering drawings and designs to ensure adherence to established specifications and standards Good communication and coordination skills to handle the clients Please send your resume to careers@neilsoft.com with the job code in the subject line. Share the page email facebook twitter linkedin pinterest

1) Senior/Junior Checker Roles and Responsibilities • Perform structural steel detail checking to ensure the drawings conform to the specifications, engineering requirements, AISC standards, and operational specific specifications • Must comply with the requirements of the design drawings and all industry standards and protocols, such as those established by AISC, AWS, and comply with current OSHA and NISD guidelines • Provide technical assistance to the Modelers and Detailers • Thorough and proficient with creating RFIs while capable of providing solutions to fabricators • Provide sketches, plans, designs, and layouts as necessary • Provide detailing solutions to address various field fixes as they may arise throughout the fabrication and installation of the steel • Assist the team with any drawing support required to complete the drawing approval, fabrication, or erection process to ensure excellence • Communicate complex and technical application issues to non-technical parties verbally and/or written • Communicate effectively with team, project managers, fabricators, and erectors • Ability to read and comprehend construction plans and specifications Qualifications and Technical Competencies • Bachelors degree of civil or mechanical engineering is required - work experience in TEKLA may substitute as an equivalent to a Bachelors degree • 5-8 years of experience in steel detailing on TEKLA is a must • Working knowledge of AISC codes, OSHA, and other standards are a must • Strong experience in reading and interpreting structural/architectural design drawings • Strong knowledge of steel manufacturing, steel erection, and shop fabrication process • Ability to read and interpret blueprints, plans, and specifications • Basic mathematics including geometry and trigonometry • Knowledge of welding specifications 2) Senior/Junior modeler Roles and Responsibilities • Works closely with Detailers/Checkers and Project Managers to prepare/submit 3D models for the structural and architectural projects for commercial and industrial buildings • Serve as a support analyst and operate detailing platforms such as TEKLA, AutoCAD, etc. • Must comply with the requirements of the design drawings and all industry standards and protocols, such as those established by AISC, AWS and comply with current OSHA, and NISD guidelines • Prepares Bill of Material, Title Block, Template, and Reports as per Clients requirement • Strong knowledge of member placement • The Senior Modeler will suggest connections wherever drawings have insufficient information, subject to the approval of the architect and structural engineer • Ensure accurate and timely delivery of drawings according to companys and/or customers standards • Generates the GA drawings, Shop drawings with related reports • Accurately complete and check all necessary system input for finalization of model and Bill of Materials • Prepares the RFIs and updates in the model as per RFIs response from the customer • Regular upkeep of the Engineering filing system and support Documentation Control • Flexible with performing other related duties as assigned Should be strong in custom component and auto connections. Qualifications and Technical Competencies • Bachelors/Diploma degree of civil or mechanical engineering is required - work experience in TEKLA may substitute as an equivalent to a Bachelors/Diploma degree • 5-10 years of experience in steel detailing with TEKLA is a must • Working knowledge of AISC codes, OSHA, AWS, and other standards are a must • Strong experience in reading and interpreting structural/architectural design drawings • Strong knowledge of steel manufacturing, steel erection and shop fabrication process • Ability to read and interpret blueprints, plans, and specifications • Basic mathematics including geometry and trigonometry • Knowledge of welding specifications • Microsoft Office (Word, Outlook, and Excel) and Google Workspace 3) Senior/Junior Detailer Roles And Responsibilities • Work closely with Modelers/Checkers and Project Managers to prepare/submit fabrication and erection drawings for structural and architectural projects for commercial/industrial buildings • Serve as a support analyst and operate detailing platforms such as TEKLA, AutoCAD, etc. • Must comply with the requirements of the design drawings and all industry standards and protocols, such as those established by the AISC and AWS while complying with current OSHA and NISD guidelines • Provide support in editing standards and/or company procedures which relate to steel detailing • Must have experience and knowledge of existing engineering codes, mathematics, building materials, and other physical sciences • Detailer will suggest solutions anywhere drawings have insufficient information, which are subject to the approval of the architect and structural engineer • Conduct Document Control through revision by keeping track of changes during the drawing creation workflow • Prepare approval, erection and fabrication drawings for projects using TEKLA, AutoCAD, etc. • Accurately complete and check all necessary system input for finalization of fabrication and erection drawings, shop details, and Bill of Materials • Communicate complex and technical application issues to non-technical parties verbally and/or written • Ability to meet scheduled deadlines on a regular basis while maintaining a high level of accuracy, quality, and being able to manage multiple projects at once Qualifications And Technical Competencies • Bachelors/Diploma degree of civil or mechanical engineering is required - work experience in TEKLA may substitute as an equivalent to a Bachelors/Diploma degree • 3-6 years of experience in steel detailing on TEKLA is a must • Working knowledge of AISC codes, OSHA, AWS, and other industry standards is a must • Strong experience in reading and interpreting structural/architectural design drawings • Strong knowledge of steel fabrication and erection • Ability to read and interpret blueprints, plans, and specifications • Basic mathematics including geometry and trigonometry • Knowledge of welding specifications • Microsoft Office (Word, Outlook, and Excel) and Google Workspace.

Position: BIM Engineer/ Sr. BIM Engineer – Structure Experience: 3-6 years Overview : The ideal candidate will have a strong background in Revit Software , particularly in Reinforcement modeling & detailing. Proficiency in Tekla Structures is an added advantage. As a BIM Modeler, you will play a pivotal role in our projects, contributing to the detailed BIM requirements. If you thrive in a collaborative environment and are eager to contribute to impactful projects, we want to hear from you. Key Responsibilities : Develop detailed BIM models using Revit Software, focusing on reinforcement modeling & detailing. Collaborate with project teams to ensure accurate representation of structural elements in the model. Review project specifications and requirements to ensure compliance with industry standards and project goals. Assist in the coordination of BIM models with other disciplines and stakeholders. Provide technical support and guidance to team members as needed. Stay updated on industry trends, software updates, and best practices related to BIM modeling. Requirements : Bachelor's degree in Civil Engineering is preferred. Proven experience as a BIM Modeler specializing in reinforcement detailing, with a minimum of 3-6 years of relevant experience. Proficiency in Revit Software is essential; experience with Tekla Structure is a plus. Experience in working on multi-story projects (Residential, Commercial, Parking Structures, etc.) for international clients from regions such as the USA, UK, etc. Strong understanding of structural modeling & detailing principles and construction techniques. Excellent communication and teamwork skills, with the ability to collaborate effectively with multidisciplinary teams. Detail-oriented with a focus on accuracy and quality. Ability to work under tight deadlines and manage multiple projects simultaneously. Job Type: Full-time Pay: ₹500,000.00 - ₹1,200,000.00 per year Benefits: Health insurance Education: Bachelor's (Preferred) Experience: total work: 4 years (Required) Work Location: In person

Job Summary We are looking for a Fresher Diploma Mechanical Engineer , who can deliver detailed analytical concepts and then back up those concepts with written justification. The Diploma Engineer Trainee will act as a mentor to the Fresher Diploma Mechanical Engineer on staff and create a work environment that is conducive to teamwork and strong professional development. Responsibilities and Duties:- Operate Control Panel,Pump House Maintenance and repairing of Control panel and Pump House Maintenance and repairing of heavy machinery. Preparation of Erection drawings, Fabrication drawings and create Tekla models as per drawings Operate CNC/VMC/HMC Machine. Duty Time-8 Hour Qualifications and Skills:- Diploma Mechanical Only Fresher Candidate Can apply for this Job Job Type-Permanent Benefits:- Job Type-Payrole Salary-15,000 to 25,000 r.s per month+pf+esic Work 26 Day in a month lodging Free & Subsidized canteen facilities available Contact-8653637905 Job Types: Full-time, Permanent, Fresher Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Food provided Health insurance Provident Fund Schedule: Day shift Rotational shift Weekend availability Supplemental Pay: Overtime pay Performance bonus Shift allowance Yearly bonus Work Location: In person

Job Description We are looking for a highly skilled and customer-focused Presales Specialist for our Tekla Products. The Tekla Presales Specialist bridges the gap between technical capabilities and customer needs. They work closely with the sales team, clients, and internal stakeholders to provide technical expertise, deliver compelling product demonstrations, and ensure customer success in adopting Tekla solutions. Key Responsibilities Conduct in-depth product demonstrations of Tekla Structures, Tekla Structural Designer, Tekla Powerfab Trimble connect and related solutions. Articulate the technical and business benefits of Tekla solutions to various stakeholders, including engineers, project managers, and executives. Customize presentations and demos to address specific client requirements. Collaborate with customers to understand their workflows, pain points, and objectives. Recommend appropriate Tekla solutions and workflows tailored to their needs. Act as a trusted advisor to clients during the decision-making process. Work alongside sales teams to create compelling proposals and proof-of-concept solutions. Contribute to marketing efforts by presenting at webinars, events, and conferences. Provide feedback from the field to influence product development and marketing strategies Stay updated on industry trends, competitor products, and emerging technologies. Identify opportunities to differentiate Tekla solutions in the market. Qualifications And Skills Bachelor’s degree in Civil Engineering, Structural Engineering, Mechanical Engineering or a related field. 3 to 7 years of experience in structural engineering, detailing, or a similar role. Prior experience in a presales or technical consulting role is advantageous. Proficiency in Tekla Structures, Tekla Structural Designer, or similar BIM/structural analysis software. Understanding of structural design, detailing, and construction workflows. Familiarity with related tools like Revit, Etabs, STAAD, and BIM platforms is a plus. Strong communication and presentation skills, with the ability to simplify complex concepts. Excellent problem-solving and analytical abilities. Ability to work collaboratively with cross-functional teams. Willingness to travel to customer locations for meetings, workshops, and demonstrations. Passion for technology and innovation in the construction and engineering industries. Key Performance Indicators (KPIs) Number of successful product demonstrations and customer engagements. Conversion rate from leads to customers based on presales efforts. Customer satisfaction and feedback on technical expertise. Contributions to pilot projects and solution implementations. About Trimble Dedicated to the world’s tomorrow, Trimble is a technology company delivering solutions that enable our customers to work in new ways to measure, build, grow and move goods for a better quality of life. Core technologies in positioning, modeling, connectivity and data analytics connect the digital and physical worlds to improve productivity, quality, safety, transparency and sustainability. From purpose-built products and enterprise lifecycle solutions to industry cloud services, Trimble is transforming critical industries such as construction, geospatial, agriculture and transportation to power an interconnected world of work. For more information about Trimble (NASDAQ: TRMB), visit: www.trimble.com Trimble’s Privacy Policy

Project execution with scope of 3D model in collaboration with project team, internal and external partners and end customer Responsible for defining, coordinating and performing the set-up of plant engineering tools (PDMS/E3D etc.) Development on CAD tools, to define the standard procedures guidelines and catalogue maintenance to improve CAE plant engineering environment Is responsible for the realization of the solution (day to day user support on various engineering tools) with the required functionality by analyzing and solving the problem Coordination with the project team, IT, expert users, developers, to provide business solution timely Housekeeping activities / Morning check of running projects to make the project functional Collaboration Coordination with the local business team and the global teams. Provide training to users on certain tool chains Controlling and executing tool development including preparation of requirement specification, tool selection, development, support coordinate Tool migration / rollout Ability to coordinate with discipline tool experts and speakers for trouble shooting Coordinates to close LOPs (List of Open Points) or provide workarounds within a scheduled time period Focus on the software and IT aspects of the tools and coordinate with the disciplines for business requests Dimensions / KPIs Ontime solution delivery Reduction of downtime Efficient working environment External / Internal Contacts External: Customer, Supplier, Consortium Partner (For 3rd party 3D model), Tool vendor Internal: Projects Teams, Expert Users, IT Team. Competence Catalog Intercultural SkillsBasic Empathizing and interacting effectively with people from diverse cultural backgrounds. CommunicationAdvanced Active listening, understanding, clarifying and interpreting while interacting with others, using appropriate communication methods and adapting to different situations, personalities and communication styles. Teamwork and CollaborationAdvanced Working effectively with others on a common task, taking action by respecting the needs and contributions of others, contributing to and accepting collaborative decision-making. Software DevelopmentBasic Apply methods, principles and tools for detailed design, implementation and unit (module) testing. This includes know-how about modern software design principles, like Model-Driven Development, or Object-Oriented Design Basics. It covers also the handling of development tool sets like editors, configuration management etc. It also includes the interface to module testing and integration environments. We don t need superheroes, just super minds: B.Tech/B.E.in Mechanical Engineering Power plant / Oil Gas Industry Experience BIM (Building Information Modeling) experience would be an advantage 6-15 years of experience in Aveva E3D/PDMS tool administration, Catalogue/specification handling, Development using PML programming. Additional programming skill like C#, .Net, Python would be an advantage

Company Description Steel Dimensions is a full-service engineering company with over twenty years of experience, currently operating at three locations. We provide services to steel fabricators, positioning ourselves on the leading edge of steel fabrication-related consulting services, offering our customers the broadest range of solutions for their particular steel fabrication and related engineering needs. Our services include design engineering, welding engineering, structural steel connection design, and structural steel detailing. Together, we focus on generating a substantial repeat business element and have become the market leader in structural steel-related consulting services. Role Description This is a full-time Tekla Modeler role located in Kerala, India and is an on-site job. As a Tekla Modeler, you will be responsible for creating fabrication and erection drawings, models, and other related documents using Tekla software to support structural steel projects. The Tekla Modeler will collaborate with other Engineers and Project Managers to ensure project design details are accurate and complete. Qualifications Expert in Tekla with a minimum of 2 years' experience as a Tekla modeler Experience with BIM environment and knowledge of Building and Construction Materials An Associate or Bachelor's degree in Structural or Civil Engineering or relevant fields Ability to work in a team environment and strong communication skills to effectively collaborate with other engineers and project managers Ability to work on multiple projects simultaneously with attention to detail Knowledge of AISC, CISC, and other International Codes related to steel detailing Ability to read blueprints and specifications Experience with Microsoft Office Suite, AutoCAD, and other relevant software Excellent problem-solving skills with a can-do attitude and ability to work independently

Job Duties: Comply with design drawing requirements by creating early RFI’s to ensure production progresses is unhindered. Review IQs, write/check RFIs and CDQ’s for accuracy and clarity prior to issuance. This task can be shared with Project Manager and/or Team Leader. Understand project finishes, sequencing, design, fabrication and install requirements and ensure required awareness by all team members. Responsible for ensuring modeling, connecting, and editing of complex structural members are accurate. You will guide the checker and Team Leaders toward complex areas requiring additional attention. Utilize your experience to ensure potential constructability issues are addressed i.e. fabrication, erection and shipping of complex and oversized members. Add and monitor project “risks” within ReqX, ensuring all team members are aware. As QC, be responsible for management and incorporation of RFI responses. You will close RFI’s once work has been incorporated, if delegated to another, you remain responsible for ensuring incorporation of associated work. Participation and leadership during project kick-off meetings (internal and external) and Post Mortems. You ensure unanswered items are tracked and resolved to minimize production issues. Ensure industry standards are understood and adhered to: OSHA, AISC, CISC etc. High level comprehension of engineering codes and standards. Responsible for maintaining knowledge of latest client drafting standards and lessons learned. Ensure product adheres to accepted Fabrication means & methods Lead and mentor checkers and other less experienced employees responsible for quality. Assisting with detailing and checking operations as, and when requested to do so, but not at the jeopardy of your primary role. Suitable level of knowledge using all production tools i.e. Tekla, Qnect, BlueBeam etc Ensure product is corrected with appropriate corrective/preventative action recorded as errors are reported by project team members and/or Quality Assurance Coordinators (Auditors). Review project specific audit reports as they are released and take appropriate action to resolve issues or non-compliance. Issues beyond your ability must be elevated to PM and managers for resolution. Solutions provider when structural drawings have insufficient information, taking a proactive mindset. Understand and report back-drafting hours to management. Awareness, recording and reporting of any back-charges upon occurrence. Regular review of back charge log for all projects. Providing constructive feedback to detailers to develop their confidence and experience. Review ECM for all your projects to ensure quality issues are trending down. Take immediate action if quality issues do not improve. Report ongoing concerns to management. Regularly update Project Managers and Team leader when project quality is not improving or when individual team members are not experienced to perform duties effectively. Provide companywide insight and training material as and when required. Experience & Qualifications: A thorough understanding of steel detailing and strong English and math skills. Spatial visualization awareness and a wide-ranging understanding of industry practices in detailing, engineering, fabrication, and erection. A willingness to develop knowledge across all locations and departments, continuous improvement. Organized with a high level of communication both written and verbal. Strong design knowledge and excellent attention to detail. Ability to meet strict deadlines. Possess excellent people skills, a good communicator, and a motivational leader. You are proactive and a logical thinker who takes initiative to solve problems early. You can perform your duties with a minimal amount of supervision. Why Work at DeSimone? At DeSimone, you’ll be part of a firm renowned for delivering high-quality structural engineering, façade consulting, structural detailing, and forensic services to clients around the globe. From iconic skyscrapers to innovative, cutting-edge designs, we provide exceptional engineering solutions for buildings of all types. Founded in 1969 in New York City, DeSimone has grown into a globally recognized firm with offices across the Americas, Europe, Asia, and the Middle East. With over 13,000 projects in 45 states and 60 countries, our impressive portfolio reflects our dedication to creating superlative structures that redefine skylines worldwide. Working at DeSimone means being involved in some of the most iconic and tallest buildings and projects in the world — we are known for pushing the boundaries of design and innovation. Whether it’s utilizing cutting-edge technology, employing creative problem-solving, or providing highly efficient, process-driven solutions, our team constantly seeks new ways to redefine what’s possible in the structural engineering industry. Our firm thrives on a collaborative, open-office environment where communication and responsiveness are key to delivering exceptional service. At DeSimone, we not only value your technical expertise but also the culture you contribute to. We maintain a commitment to fostering a diverse and inclusive environment, where every team member has the opportunity to grow and contribute to the success of the firm. DeSimone also takes pride in giving back to the community through volunteering opportunities and initiatives, which reflect our core values of service and responsibility. Our successful Summer Intern Program allows aspiring engineers to gain hands-on experience, while our strong university relationships, college events, guest speakers, and community engagement ensure that we continue to inspire and nurture the next generation of talent. Join us and help build the future while working in a culture that inspires innovation, recognizes achievement, and is committed to excellence every step of the way. Disclaimer: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. We appreciate your interest in DeSimone and look forward to reviewing your application. DeSimone is an equal employment opportunity (EEO) employer.

Job Duties: Managing allocated projects as a Team Leader Communicating and sharing resources with other Team Leaders as demands for resources ebb and flow Ensuring those under your supervision perform assigned tasks effectively Monitoring and reporting attendance, lateness, and extended break violation Reporting to SDE’s Operations Manager any and all issues and/or concerns that arise on the production floor via email and in person Approaching personnel with fairness and respect in all your dealings Comprehensive understanding of employees’ strengths and weaknesses, harnessing strengths and managing weaknesses Communicating effectively and with respect to all staff, with an aim to keep them motivated and performing at high levels of productivity. Reviewing, understanding, and ensuring Customer Standards are followed Responsible for ensuring that Grid/ABM/Connecting & Checking duties have been completed for each deliverable Assisting Shift Supervisor and Team as a detailer when and if required to help maintain schedul Creating Request for Information’s (RFI’s) Managing RFI Log with Project Manager/Shift Supervisor Raising Extra Work Order opportunities, allocating hours, tracking approved hours. Awareness and distribution of Project Data such as the Revised IFC, IFA, RFA etc. Responsible for Mentoring Junior Team Leaders Arrange internal kick off meeting/project team meeting (review recorded meeting), review kick off meeting notes, and ensuring all team members both current and future are aware and educated on all information surrounding kick off meetings. Ensuring Project Folder contains all relevant information Responsible for releasing shop and field drawing lists for editing when working in multi-office workflow Responsible for issuing shop and field packages/sequences Projects: Team Leader will work on medium to larger size project, both in size and complexity. Team sizes will be larger. Team Leader must have an assigned mentor, either Operations Manager, Shift Supervisor. Experience & Qualifications: Must have experience in detailing/checking and be adept at balancing tight schedules. A thorough understanding of steel detailing and production standards is necessary. You must have a sound understanding of Dowco’s business processes. You must be organized and have excellent communication skills both written and verbally. You possess excellent people skills and are a motivational leader. In this role you are proactive and a logical thinker who takes initiative to solve problems early. You are knowledgeable in industry technology and specifications. You are someone who performs all your daily duties with honesty and integrity. Minimum of 8 years’ experience in the steel detailing industry. Development: Level 1: Connection design course or NISD Detailing Class II (or approved equivalent by the Quality Assurance Manager) and Tekla Evaluation Level 2: Managing Successful Team Meetings Training, Dowco Processes Exam and Tekla Evaluation Level 3: NISD Detailing Class 1 (or approved equivalent by the Quality Assurance Manager) and Tekla Evaluation Why Work at DeSimone? At DeSimone, you’ll be part of a firm renowned for delivering high-quality structural engineering, façade consulting, structural detailing, and forensic services to clients around the globe. From iconic skyscrapers to innovative, cutting-edge designs, we provide exceptional engineering solutions for buildings of all types. Founded in 1969 in New York City, DeSimone has grown into a globally recognized firm with offices across the Americas, Europe, Asia, and the Middle East. With over 13,000 projects in 45 states and 60 countries, our impressive portfolio reflects our dedication to creating superlative structures that redefine skylines worldwide. Working at DeSimone means being involved in some of the most iconic and tallest buildings and projects in the world — we are known for pushing the boundaries of design and innovation. Whether it’s utilizing cutting-edge technology, employing creative problem-solving, or providing highly efficient, process-driven solutions, our team constantly seeks new ways to redefine what’s possible in the structural engineering industry. Our firm thrives on a collaborative, open-office environment where communication and responsiveness are key to delivering exceptional service. At DeSimone, we not only value your technical expertise but also the culture you contribute to. We maintain a commitment to fostering a diverse and inclusive environment, where every team member has the opportunity to grow and contribute to the success of the firm. DeSimone also takes pride in giving back to the community through volunteering opportunities and initiatives, which reflect our core values of service and responsibility. Our successful Summer Intern Program allows aspiring engineers to gain hands-on experience, while our strong university relationships, college events, guest speakers, and community engagement ensure that we continue to inspire and nurture the next generation of talent. Join us and help build the future while working in a culture that inspires innovation, recognizes achievement, and is committed to excellence every step of the way. Disclaimer: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. We appreciate your interest in DeSimone and look forward to reviewing your application. DeSimone is an equal employment opportunity (EEO) employer.