22 System Study Jobs

AECOM is seeking for a candidate to be based in Bengaluru or Gurgaon. Candidate will be responsible for the following activities: Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Minimum Overall 8+ years of work experience is preferred. Previous experience in HV Cable OEM design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Underground HV Cables design is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with CYMCAP or other similar software tools for EHV/HV AC and DC Cable Ampacity calculations, EMTP Calculations and modelling expertise is highly desirable Chartership with IET-UK or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

AECOM is seeking for a candidate to be based in Bengaluru or Gurgaon. Candidate will be responsible for the following activities: Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Minimum Overall 8+ years of work experience is preferred. Previous experience in HV Cable OEM design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Underground HV Cables design is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with CYMCAP or other similar software tools for EHV/HV AC and DC Cable Ampacity calculations, EMTP Calculations and modelling expertise is highly desirable Chartership with IET-UK or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree in Power Systems / Energy Systems or equivalent educationfrom an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., IET UK) Minimum Overall 6+ years of work experience in consulting or design organization is preferrable. Prior experience in performing Grid Connection related (PSSE / PSCAD / ETAP / DigSilent Power Factory / CDEGS / Equivalent) dynamic or advanced power system studies is preferred. Experience on System Studies for large EHV Grid Substations is mandatory. As a minimum System Study experience needed in Load Flow, Short Circuit Studies, Motor Starting Studies, Relay Coordination, Arch Flash Studies, Harmonic Studies, Unbalance load study, Relay Settings, Earthing Design, Cable Ampacity, Insulation Coordination, etc. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Substations and Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Very good communication skills (Oral and Written) in English language is mandatory

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree in Power Systems / Energy Systems or equivalent educationfrom an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., IET UK) Minimum Overall 6+ years of work experience in consulting or design organization is preferrable. Prior experience in performing Grid Connection related (PSSE / PSCAD / ETAP / DigSilent Power Factory / CDEGS / Equivalent) dynamic or advanced power system studies is preferred. Experience on System Studies for large EHV Grid Substations is mandatory. As a minimum System Study experience needed in Load Flow, Short Circuit Studies, Motor Starting Studies, Relay Coordination, Arch Flash Studies, Harmonic Studies, Unbalance load study, Relay Settings, Earthing Design, Cable Ampacity, Insulation Coordination, etc. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Substations and Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Very good communication skills (Oral and Written) in English language is mandatory

Project Role : Application Developer Project Role Description : Design, build and configure applications to meet business process and application requirements. Must have skills : SAP for Utilities Billing Good to have skills : NAMinimum 5 year(s) of experience is required Educational Qualification : 15 years full time educationKey Responsibilitiesa. Design, configure and build applications to meet business process and application requirements b. Knowledge in Analyzing requirements and enhancing and building highly optimized standard / custom applications as well as creating Business Process and related technical documentationc. Billing Execution Individual and batch for Daily reporting to Managers, Risk identification in your moduled. Knowledge on Analyzing Issues and working on bug fixes Technical Experienceb. Should have knowledge on Standard Modules used in RICEFW development for Billing Objects c. Should have good knowledge on all Billing and Invoicing processes like Meter to Cash Cycle, Billing exceptions and reversals, Joint Invoicing, Bill Printing, Collective invoicing and Advance Billing functions like Real Time Pricing and Budget Billingd. Should have sound knowledge on Billing Mater Data and Integration points with Device Management and FICAe. Should have strong De-bugging skills , PWBAdditional infoa. Good Communication Skillb. Good interpersonal skill.c. A minimum of 15 years of full-time education is required. Qualification 15 years full time education

Project Role : Application Developer Project Role Description : Design, build and configure applications to meet business process and application requirements. Must have skills : SAP for Utilities Billing Good to have skills : NAMinimum 5 year(s) of experience is required Educational Qualification : 15 years full time educationKey Responsibilitiesa. Design, configure and build applications to meet business process and application requirementsb. Knowledge in Analyzing requirements and enhancing and building highly optimized standard / custom applications as well as creating Business Process and related technical documentationc. Billing Execution Individual and batch for Daily reporting to Managers.d. Risk identification in your modulee. Knowledge on Analyzing Issues and working on bug fixes Technical Experiencea. Should have hands on knowledge of implementing Billing related enhancements , FQ eventsb. Should have knowledge on Standard Modules used in RICEFW development for Billing Objectsc. Should have good knowledge on all Billing and Invoicing processes like Meter to Cash Cycle, Billing exceptions and reversals, Joint Invoicing, Bill Printing, Collective invoicing and Advance Billing functions like Real Time Pricing and Budget Billingd. Should have understanding of Billing Mater Data and Integration points with Device Management and FICAe. Should have strong De-bugging skills , PWB Professional Attributes1 Good Communication Skill 2 Flexible to work 3 Ability to work under pressure 4 Good Analytical skill and presentation skill 5 Decision making ability Qualification 15 years full time education

Engineer-power system studies Think bigger scale. Think higher profile. Think ground-breaking. Join WSP, and you’ll be at the heart of a team of international experts all dedicated to growing and sharing their expertise, and working on projects that transform society for all of us. WSP are looking for Principal Engineer – Power System Studies with over ten years’ experience of overall responsibility of strong engineering design, installation, configuration testing and commissioning, co-ordination including site supervision of works with emphasis on meeting the contract requirements with respect to quality, time and budget. The key objectives of the roles are to: Power system analysis of transmission and distribution projects. Feasibility studies, masterplans, despatch studies, renewable integration, grid code reviews Preparation of Renewable generation connection schemes from distribution to utility scale generation including determining techno-economical optimum amount of renewable generation. Load flow study, fault level calculations, harmonic analysis, voltage stability and transient stability analysis on transmission, distribution, and industrial power systems, using DIgSILENT, PSS/E, PLEXOS, ETAP, CYME PSAF, ASPEN OneLiner, ASPEN database and IPSA+. Review all the Power System Studies technical submittals by EPC contractor / Developers in reference to Client’s Electricity Transmission Code and International standards as applicable. Review the Power system models developed by EPC contractor specific to each study. Attend all the required meetings & address all the technical clarifications raised by EPC contractor / Developer. Attend the FAT & SAT visits to ensure all the performance criteria are met related to grid compliance requirements. The test shall be conducted with RTDS or other similar tools. Review the updated model received from EPC based on FAT/SAT reports and ensure all the grid compliance requirements are met as agreed during the detail design stage. Assist Client to incorporate HVDC model provided by EPC contractor into the TRANSCO network PSSE & PSCAD models suitable for various planning studies (steady state and dynamics). The power system studies review work shall briefly include, but not limited to the following: Reactive power capability study Grid impact study Transient and dynamic stability studies Insulation co-ordination study Switching transient study Faulted transient switching study Transformer Energization study AC/DC harmonics and flicker study AC/DC harmonic filter sizing report Harmonic impedance locus identification and analysis study AC protection relay setting coordination study Sub-synchronous resonance studies All required ETC compliance studies We'd love to hear from you if you have: Master’s Degree in Electrical / Power systems Engineering. Minimum 10 years of working experience with similar capacity. Proficient with Power system study softwares like PSS Sincal, PSSE, PLS CAD, Dig silent etc. Must have experience in Power System Studies and design related to High Voltage Direct Current (HVDC) offshore projects, Specifically Voltage Source Converter technologies, Grid Impact studies, etc. Must have experience in Power system studies on Transmission and Distribution projects. Essentially having detailed knowledge related to review of contractor’s drawings. People managing skill, with excellent written and verbal skills. Able to build excellent client relations through communication and multidisciplinary coordination skills Plexos Energy modelling What if we can? What if we can have work-life balance? What if we can be rewarded in ways that support our individual needs? What if we can be accepted for who we are? Here at WSP – we can! WSP recognizes that work is only one part of our lives and making time for the other things in our life is important – be that our families, our friends or ourselves. So, if working from home, working part-time or having flexible start and finish time will help with this let us know as part of your application. As well as rewarding you with competitive pay, WSP offers standard benefits including first class medical cover, paid professional subscriptions. Be you, be happy - we strive to have a friendly and inclusive culture which respects and maximizes the contribution individuals can bring to WSP. We recognise the benefits that people with varying backgrounds and experiences can bring. Here at WSP we positively encourage applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, religion or belief, marital status, pregnancy or maternity/paternity. We will interview all disabled applicants who meet the essential criteria.

Dear Candidate, We are seeking a Systems Analyst to bridge business needs with technology solutions. Best suited for analytical thinkers who enjoy working across technical and business domains. Key Responsibilities: Analyze current systems and identify areas for improvement Gather and document business and functional requirements Collaborate with developers, QA, and stakeholders Assist with systems testing and validation Required Skills & Qualifications: Strong problem-solving and communication skills Experience with requirement gathering and use case modeling Familiarity with software development lifecycle (SDLC) Bonus: Knowledge of BPMN, UML, or tools like JIRA and Confluence Note: If interested, please share your updated resume and preferred time for a discussion. If shortlisted, our HR team will contact you. Kandi Srinivasa Delivery Manager Integra Technologies

Project Role : Application Developer Project Role Description : Design, build and configure applications to meet business process and application requirements. Must have skills : SAP for Utilities Billing Good to have skills : NA Minimum 7.5 year(s) of experience is required Educational Qualification : Minimum 15 years full time education Key Responsibilitiesa. Design, configure and build applications to meet business process and application requirementsb. Knowledge in Analyzing requirements and enhancing and building highly optimized standard / custom applications as well as creating Business Process and related technical documentationc. Billing Execution Individual and batch for Daily reporting to Managers.d. Risk identification in your modulee. Knowledge on Analyzing Issues and working on bug fixes Technical Experiencea. Should have hands on knowledge of implementing Billing related enhancements , FQ eventsb. Should have knowledge on Standard Modules used in RICEFW development for Billing Objectsc. Should have good knowledge on all Billing and Invoicing processes like Meter to Cash Cycle, Billing exceptions and reversals, Joint Invoicing, Bill Printing, Collective invoicing and Advance Billing functions like Real Time Pricing and Budget Billingd. Should have understanding of Billing Mater Data and Integration points with Device Management and FICAe. Should have strong De-bugging skills , PWB Professional Attributes1 Good Communication Skill 2 Flexible to work 3 Ability to work under pressure 4 Good Analytical skill and presentation skill 5 Decision making ability Qualification Minimum 15 years full time education

* Overall 8+ years of work experience is preferred. * Previous experience in HV Cable OEM design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Underground HV Cables design is highly desirable * Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred * Previous design experience working with CYMCAP or other similar software tools for EHV/HV AC and DC Cable Ampacity calculations, EMTP Calculations and modelling expertise is highly desirable * Chartership with IET-UK or equivalent is desirable * Very good communication skills (Oral and Written) in English language is mandatory Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Overall 8+ years of work experience is preferred. Minimum Requirements Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Structural design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Chartership or Fellowship with ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory Additional Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our employees and their families. We also provide a robust global well-being program. Were the worlds trusted global infrastructure firm, and were in this together your growth and success are ours too. As an Equal Opportunity Employer, we believe in each persons potential, and well help you reach yours. #LI-FS1 About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, youll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career youve always envisioned. Here, youll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated toimproving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the worlds most complex challenges and deliver more impact together. Role Description Working within our Design & Engineering teams, you'll create some of the worlds most iconic and ground-breaking structures and spaces that transform the world around us, from making journeys easier to opening up public places that bring people together. The role sits within our Resilience Global Business Area. We work to protect our natural environment and water resources, while powering our world for future generations. Around the world, were feeling the effects climate change, rapid urbanization, loss of biodiversity. The rate at which were seeing large-scale, unforeseen events such as floods and wildfires, is becoming more frequent.We are here to protect our natural environment and water resources, while powering our world for future generations. Role Objectives Engineering Excellence:To deliver power systems study projects meeting high quality standards and drive technical excellence in the team. Advanced Analysis:" To bring engineering capabilities to static and dynamic power system studies. Technical Leadership:To develop industry knowledge of international standards through internal technical training, certifications and continuing education. Project Management:"Manage tasks to meet budget, quality, and timeframe targets, driving re-engineering strategies to enhance profitability. Mentorship and Development:" Develop the technical skills of junior engineers, fostering an environment of growth and expertise. Role Accountabilities The main responsibilities of this role include, but are not limited to: Preparing and reviewing engineering deliverables including complex reports, proposals, presentations with the GBA Power Delivery Team. Conducting power flow, short circuit, reactive power, and power quality studies, including grid compliance studies. Conducting protection coordination, relay settings and arc flash studies. Conducting power system dynamic studies including grid connection studies for renewable integration. Taking personal responsibility for the preparation of detailed engineering documentation and leading the engineering effort for project including providing technical and performance oversight for members of the power team. To manage selected projects, project task/responsibilities as assigned, and/or design processes (or parts of projects) to meet agreed budget, quality and timeframe targets. To deliver fully documented designs to meet Client objectives and Arcadis quality system requirements. To develop the technical competency of direct reports/ junior team members and ensure application of relevant international standards and engineering knowledge in various projects. TECHNICAL RESPONSIBILITIES: Apply engineering knowledge, techniques and tools complying with international design standards relevant to the assigned project. Prepare technical report for the appropriate project complying with codes and standards and delivering the design with high quality. Conduct internal review and quality checks of power system models and simulation results to ensure compliance with the project's requirements. Prepare and register all relevant documentation and ensure all documentation is accurate and in compliance with the Arcadis and customer requirements. Leading interdisciplinary coordination as required for the project. COMMERCIAL RESPONSIBILITIES: Record man-hour charges in weekly timesheets and ensure correctness of project/non-project man-hour charges. Proactively manage selected projects, take responsibility for resource allocation, manage subcontractors, deliverables, ensure integrity of overall design in collaboration with other disciplines, QA, and Client feedback. Identify opportunities and driving implementation of re-engineering strategies to maximize the profitability. Pursuing new opportunities, identifying, and documenting scope, schedule, budget, and exclusions. PEOPLE MANAGEMENT RESPONSIBILITIES: Develop skills and knowledge base of junior engineers assigned on projects. Liaise with Project Manager, client, vendors and other stakeholders assigned to projects. OTHERS: Liaise with Arcadis lead offices representatives and other consultants as appropriate to the project. Working to achieve project delivery on time to budget and to a high standard in accordance with Client expectations. Gain experience and proficiency in Arcadis systems and procedures. Become familiar and compliant with Health and Safety regulations and guidelines. Perform other duties and responsibilities as required relevant to the role from time to time. Qualifications & Experience At least 5 years experience in power system study projects, preferably in a consulting environment. Ability to conduct and review the following studies independently - power flow, short circuit, harmonics, protection coordination, unit protection, arc flash. Significant experience in RMSdynamic stability studies, particularly grid connection studies for renewables. Experience with ETAP, SKM PTW, PSSE, DigSilent PowerFactory, EMTP-RV, PSCAD, or similar software. Desirable to have skills inEMT studies - insulation coordination, transient recovery voltage. Consulting experience in power projects in Australia and UK is desirable. Excellent English written and verbal communication skills. Excellent mathematical skills applied in engineering calculations. Organizational skills and proactive approach in project management. Ability to lead, and provide technical solutions to problems with good influencing, motivating and delegating skills. Highly Regarded Skills Desirable to haveunderstanding of Australian electricity market and renewable energy. Computational design, automation skills, and proficiency in Python scripting for power system studies. Experience in renewable energy projects (Solar, Wind, BESS). Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. Its why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. Youll do meaningful work, and no matter what role, youll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging. We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. Join Arcadis. Create a legacy. Location - Bengaluru,Hyderabad,Mumbai,Noida

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : SAP for Utilities Billing Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : Minimum 15 yrs of full time education Key Responsibilitiesa. Design, configure and build applications to meet business process and application requirements b. Knowledge in Analyzing requirements and enhancing and building highly optimized standard / custom applications as well as creating Business Process and related technical documentationc. Billing Execution Individual and batch for Daily reporting to Managers, Risk identification in your moduled. Knowledge on Analyzing Issues and working on bug fixes Technical Experiencea. Should have hands on knowledge of implementing Billing related enhancements , FQ events b. Should have knowledge on Standard Modules used in RICEFW development for Billing Objects c. Should have good knowledge on all Billing and Invoicing processes like Meter to Cash Cycle, Billing exceptions and reversals, Joint Invoicing, Bill Printing, Collective invoicing and Advance Billing functions like Real Time Pricing and Budget Billingd. Should have sound knowledge on Billing Mater Data and Integration points with Device Management and FICAe. Should have strong De-bugging skills , PWB. Professional Attributes1 Good Communication Skill2 Flexible to work3 Ability to work under pressure4 Good Analytical skill and presentation skill5 Decision making ability5 Decision making ability Qualifications Minimum 15 yrs of full time education

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : SAP for Utilities Billing Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : Minimum 15 yrs of full time education Key Responsibilitiesa. Design, configure and build applications to meet business process and application requirements b. Knowledge in Analyzing requirements and enhancing and building highly optimized standard / custom applications as well as creating Business Process and related technical documentationc. Billing Execution Individual and batch for Daily reporting to Managers, Risk identification in your moduled. Knowledge on Analyzing Issues and working on bug fixes Technical Experiencea. Should have hands on knowledge of implementing Billing related enhancements , FQ events b. Should have knowledge on Standard Modules used in RICEFW development for Billing Objects c. Should have good knowledge on all Billing and Invoicing processes like Meter to Cash Cycle, Billing exceptions and reversals, Joint Invoicing, Bill Printing, Collective invoicing and Advance Billing functions like Real Time Pricing and Budget Billingd. Should have sound knowledge on Billing Mater Data and Integration points with Device Management and FICAe. Should have strong De-bugging skills , PWB. Professional Attributes1 Good Communication Skill2 Flexible to work3 Ability to work under pressure4 Good Analytical skill and presentation skill5 Decision making ability5 Decision making ability Qualifications Minimum 15 yrs of full time education

Skill required: IX Intelligent Capital Project Operations - Low Carbon Grid Capital Projects Designation: Capital Projects Manager Qualifications: BE Years of Experience: 13 to 18 years What would you do? "Industry X operations enables end-to-end operations integration through data & digital twin to operate client core processes and client product centric operations. Moving to an intelligent operating model powered by data, digital technologies and talent unlocked value at the seams Investment project management and control capabilities related to grid assets to enable the energy transition (e.g. transmission interconnections)." What are we looking for? " Problem-solving skills Electricity Transmission-Power System Engineer- Electrical Generation, Transmission and Distribution Technology. Energy Business:Work on Dig silent Power Factory/ETAP/MATLAB or Similar Power System Modelling Software:Work on Circuit Design, Modelling of Generation, Transmission, Distribution network from Electrical drawings / Data sheets:Familiar with standards like ANSI (American National Standards Institute), IEEE, NEC, ISA, NEMA:Review of electrical drawings SLD (Single Line Diagram) and Datasheets:Electrical network power flow analysis, complex circuits, Network development and Network optimization. Preparation of Substation layouts and section data updating in Dig silent Power Factory projects based on customer specification. Preparation of Asset transmission and reinforcement design in grid network. Support the senior engineer with the inputs for all design calculations related to Primary & Power factory simulation software. Understanding of Technical data sheets of primary equipment. Basic Knowledge of primary equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc. Power System Engineer should have the following basic understanding. " Roles and Responsibilities: "Electricity Transmission-Power System Engineer- Electrical Generation, Transmission and Distribution Technology. Energy Business:Work on Dig silent Power Factory/ETAP/MATLAB or Similar Power System Modelling Software:Work on Circuit Design, Modelling of Generation, Transmission, Distribution network from Electrical drawings / Data sheets:Familiar with standards like ANSI (American National Standards Institute), IEEE, NEC, ISA, NEMA:Review of electrical drawings SLD (Single Line Diagram) and Datasheets:Electrical network power flow analysis, complex circuits, Network development and Network optimization. Preparation of Substation layouts and section data updating in Dig silent Power Factory projects based on customer specification. Preparation of Asset transmission and reinforcement design in grid network. Support the senior engineer with the inputs for all design calculations related to Primary & Power factory simulation software. Understanding of Technical data sheets of primary equipment. Basic Knowledge of primary equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc. Power System Engineer should have the following basic understanding. Fundamentals of power System. Understanding AC and DC Load Power Flow analysis. Understanding of Short circuit faults. Knowledge of Power Factory Tool, PSSE, PSCAD, ETAP, SKM NG Deliverables Point of View 1)Customer Connectivity (Offer studies) 2)Studies for transformer Project progression DNO (Distribution Network Operators) connection (132 KV and below) 3)Network option assessment studies- Planning Studies (NOA (Network Option Assessment)) - (April to September) 4)Demand Compliance Studies BO7 - (September to February) Power System study point of view for NG requirement - Short circuit studies (3phase and single phase) Boundary creation and assessment for wider network planning for HV (High Voltage) side 400/275kV Voltage studies -400/275/132Kv (Voltage step change) Thermal studies 400/275/132kV (Contingency analysis), Transformer contingency (N-1, N-2 fault Condition) 1)Substation design modelling 2)Feasibility studies- customer connections offer to utility network 3)Network option assessment 4)Reinforcement work 5)Demand compliance studies on LV side 6)Short circuit studies 7)Contingency analysis N-1 N-2 N-1-D 8)Load flow analysis 9)Voltage studies 10)Per unit analysis 11)How facts device works with detailed engineering Qualifications BE

Skill required: IX Intelligent Capital Project Operations - Low Carbon Grid Capital Projects Designation: Capital Projects Manager Qualifications: BE Years of Experience: 13 to 18 years What would you do? "Industry X operations enables end-to-end operations integration through data & digital twin to operate client core processes and client product centric operations. Moving to an intelligent operating model powered by data, digital technologies and talent unlocked value at the seams Investment project management and control capabilities related to grid assets to enable the energy transition (e.g. transmission interconnections)." What are we looking for? " Problem-solving skills Electricity Transmission-Power System Engineer- Electrical Generation, Transmission and Distribution Technology. Energy Business:Work on Dig silent Power Factory/ETAP/MATLAB or Similar Power System Modelling Software:Work on Circuit Design, Modelling of Generation, Transmission, Distribution network from Electrical drawings / Data sheets:Familiar with standards like ANSI (American National Standards Institute), IEEE, NEC, ISA, NEMA:Review of electrical drawings SLD (Single Line Diagram) and Datasheets:Electrical network power flow analysis, complex circuits, Network development and Network optimization. Preparation of Substation layouts and section data updating in Dig silent Power Factory projects based on customer specification. Preparation of Asset transmission and reinforcement design in grid network. Support the senior engineer with the inputs for all design calculations related to Primary & Power factory simulation software. Understanding of Technical data sheets of primary equipment. Basic Knowledge of primary equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc. Power System Engineer should have the following basic understanding. " Roles and Responsibilities: "Electricity Transmission-Power System Engineer- Electrical Generation, Transmission and Distribution Technology. Energy Business:Work on Dig silent Power Factory/ETAP/MATLAB or Similar Power System Modelling Software:Work on Circuit Design, Modelling of Generation, Transmission, Distribution network from Electrical drawings / Data sheets:Familiar with standards like ANSI (American National Standards Institute), IEEE, NEC, ISA, NEMA:Review of electrical drawings SLD (Single Line Diagram) and Datasheets:Electrical network power flow analysis, complex circuits, Network development and Network optimization. Preparation of Substation layouts and section data updating in Dig silent Power Factory projects based on customer specification. Preparation of Asset transmission and reinforcement design in grid network. Support the senior engineer with the inputs for all design calculations related to Primary & Power factory simulation software. Understanding of Technical data sheets of primary equipment. Basic Knowledge of primary equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc. Power System Engineer should have the following basic understanding. Fundamentals of power System. Understanding AC and DC Load Power Flow analysis. Understanding of Short circuit faults. Knowledge of Power Factory Tool, PSSE, PSCAD, ETAP, SKM NG Deliverables Point of View 1)Customer Connectivity (Offer studies) 2)Studies for transformer Project progression DNO (Distribution Network Operators) connection (132 KV and below) 3)Network option assessment studies- Planning Studies (NOA (Network Option Assessment)) - (April to September) 4)Demand Compliance Studies BO7 - (September to February) Power System study point of view for NG requirement - Short circuit studies (3phase and single phase) Boundary creation and assessment for wider network planning for HV (High Voltage) side 400/275kV Voltage studies -400/275/132Kv (Voltage step change) Thermal studies 400/275/132kV (Contingency analysis), Transformer contingency (N-1, N-2 fault Condition) 1)Substation design modelling 2)Feasibility studies- customer connections offer to utility network 3)Network option assessment 4)Reinforcement work 5)Demand compliance studies on LV side 6)Short circuit studies 7)Contingency analysis N-1 N-2 N-1-D 8)Load flow analysis 9)Voltage studies 10)Per unit analysis 11)How facts device works with detailed engineering Qualifications BE

Instrumental in understanding the requirements and design of the product/ software Develop software solutions by studying information needs, studying systems flow, data usage and work processes Investigating problem areas followed by the software development life cycle Facilitate root cause analysis of the system issues and problem statement Identify ideas to improve system performance and impact availability Analyze client requirements and convert requirements to feasible design Collaborate with functional teams or systems analysts who carry out the detailed investigation into software requirements Conferring with project managers to obtain information on software capabilities

Role & responsibilities Power System Analysis Load Flow, Short Circuit, Transient Stability, optimal power flow, optical capacitor placement, P-V and Q-V analysis, Voltage stability , Tap changer optimization study, system security analysis, Insulation coordination and EMT studies (TOV, SFO, FFO, VFTO etc) , Relay Coordination, Harmonic analysis, Flicker, voltage fluctuation and Arc Flash studies. Solar/Onshore Wind/ Off-shore wind/ Battery storage grid code compliance study with steady state P-Q analysis, LVRT, HVRT, FRT and Set point controls. Power Transmission System Master planning studies involving assessment of SVC, STACOM, HVDC interconnection, Frequency stability, UFLS implementation, AGC and small signal stability analysis. Power Distribution System Master planning studies involving PV, Electric vehicle, Battery Storage, reliability analysis and distribution system automation. Preferred candidate profile PSS/E, PSCAD, ETAP, Advanced Excel and Power point is a must. Working experience with DigSilent power factory, Power world simulator, MATLAB, Simulink, PV Syst, Homer, CYMDIST, Arc GIS or PLEXOS will be an added advantage. Python scripting and coding experience of PSS/E, PSCAD , DigSilent power factory and ETAP with demonstrated history of working is an added advantag

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : SAP for Utilities Billing Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : Minimum 15 yrs of full time education Key Responsibilitiesa. Design, configure and build applications to meet business process and application requirements b. Knowledge in Analyzing requirements and enhancing and building highly optimized standard / custom applications as well as creating Business Process and related technical documentationc. Billing Execution Individual and batch for Daily reporting to Managers, Risk identification in your moduled. Knowledge on Analyzing Issues and working on bug fixes Technical Experiencea. Should have hands on knowledge of implementing Billing related enhancements , FQ events b. Should have knowledge on Standard Modules used in RICEFW development for Billing Objects c. Should have good knowledge on all Billing and Invoicing processes like Meter to Cash Cycle, Billing exceptions and reversals, Joint Invoicing, Bill Printing, Collective invoicing and Advance Billing functions like Real Time Pricing and Budget Billingd. Should have sound knowledge on Billing Mater Data and Integration points with Device Management and FICAe. Should have strong De-bugging skills , PWB. Professional Attributes1 Good Communication Skill2 Flexible to work3 Ability to work under pressure4 Good Analytical skill and presentation skill5 Decision making ability5 Decision making ability Qualifications Minimum 15 yrs of full time education

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : SAP for Utilities Billing Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : Minimum 15 yrs of full time education Key Responsibilitiesa. Design, configure and build applications to meet business process and application requirements b. Knowledge in Analyzing requirements and enhancing and building highly optimized standard / custom applications as well as creating Business Process and related technical documentationc. Billing Execution Individual and batch for Daily reporting to Managers, Risk identification in your moduled. Knowledge on Analyzing Issues and working on bug fixes Technical Experiencea. Should have hands on knowledge of implementing Billing related enhancements , FQ events b. Should have knowledge on Standard Modules used in RICEFW development for Billing Objects c. Should have good knowledge on all Billing and Invoicing processes like Meter to Cash Cycle, Billing exceptions and reversals, Joint Invoicing, Bill Printing, Collective invoicing and Advance Billing functions like Real Time Pricing and Budget Billingd. Should have sound knowledge on Billing Mater Data and Integration points with Device Management and FICAe. Should have strong De-bugging skills , PWB. Professional Attributes1 Good Communication Skill2 Flexible to work3 Ability to work under pressure4 Good Analytical skill and presentation skill5 Decision making ability5 Decision making ability Qualifications Minimum 15 yrs of full time education

Project Role : Application Developer Project Role Description : Design, build and configure applications to meet business process and application requirements. Must have skills : SAP Master Data Migration Good to have skills : NA Minimum 7.5 year(s) of experience is required Educational Qualification : 15 year full time education Project Role :Application Developer Project Role Description :Design, build and configure applications to meet business process and application requirements. Must have Skills :SAP Master Data MigrationGood to Have Skills :No Technology SpecializationJob Requirements :Key Responsibilities :1 Design, configure and build applications to meet business process and application requirements 2 Knowledge in Analyzing requirements and enhancing and building highly optimized standard / custom applications as well as creating Business Process and related technical documentation 3 Utilities Billing Execution Individual and batch for Daily reporting to Managers, Risk identification in your module Technical Experience :1 Should have knowledge on Standard Modules used in RICEFW development for Billing Objects 2Should have good knowledge on all Billing and Invoicing processes like Meter to Cash Cycle, Billing exceptions and reversals, Joint Invoicing, Bill Printing, Collective invoicing and Advance Billing functions like Real Time Pricing and Budget Billing 3 Should have strong De-bugging skills Professional Attributes :1 Good Communication Skill 2 Good Analytical skills Educational Qualification:15 year full time educationAdditional Info :Regular shift Qualifications 15 year full time education

Skill required: IX Intelligent Capital Project Operations - Low Carbon Grid Capital Projects Designation: Capital Projects Manager Qualifications: BE Years of Experience: 13 to 18 years What would you do? "Industry X operations enables end-to-end operations integration through data & digital twin to operate client core processes and client product centric operations. Moving to an intelligent operating model powered by data, digital technologies and talent unlocked value at the seams Investment project management and control capabilities related to grid assets to enable the energy transition (e.g. transmission interconnections)." What are we looking for? " Problem-solving skills Electricity Transmission-Power System Engineer- Electrical Generation, Transmission and Distribution Technology. Energy Business:Work on Dig silent Power Factory/ETAP/MATLAB or Similar Power System Modelling Software:Work on Circuit Design, Modelling of Generation, Transmission, Distribution network from Electrical drawings / Data sheets:Familiar with standards like ANSI (American National Standards Institute), IEEE, NEC, ISA, NEMA:Review of electrical drawings SLD (Single Line Diagram) and Datasheets:Electrical network power flow analysis, complex circuits, Network development and Network optimization. Preparation of Substation layouts and section data updating in Dig silent Power Factory projects based on customer specification. Preparation of Asset transmission and reinforcement design in grid network. Support the senior engineer with the inputs for all design calculations related to Primary & Power factory simulation software. Understanding of Technical data sheets of primary equipment. Basic Knowledge of primary equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc. Power System Engineer should have the following basic understanding. " Roles and Responsibilities: "Electricity Transmission-Power System Engineer- Electrical Generation, Transmission and Distribution Technology. Energy Business:Work on Dig silent Power Factory/ETAP/MATLAB or Similar Power System Modelling Software:Work on Circuit Design, Modelling of Generation, Transmission, Distribution network from Electrical drawings / Data sheets:Familiar with standards like ANSI (American National Standards Institute), IEEE, NEC, ISA, NEMA:Review of electrical drawings SLD (Single Line Diagram) and Datasheets:Electrical network power flow analysis, complex circuits, Network development and Network optimization. Preparation of Substation layouts and section data updating in Dig silent Power Factory projects based on customer specification. Preparation of Asset transmission and reinforcement design in grid network. Support the senior engineer with the inputs for all design calculations related to Primary & Power factory simulation software. Understanding of Technical data sheets of primary equipment. Basic Knowledge of primary equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc. Power System Engineer should have the following basic understanding. Fundamentals of power System. Understanding AC and DC Load Power Flow analysis. Understanding of Short circuit faults. Knowledge of Power Factory Tool, PSSE, PSCAD, ETAP, SKM NG Deliverables Point of View 1)Customer Connectivity (Offer studies) 2)Studies for transformer Project progression DNO (Distribution Network Operators) connection (132 KV and below) 3)Network option assessment studies- Planning Studies (NOA (Network Option Assessment)) - (April to September) 4)Demand Compliance Studies BO7 - (September to February) Power System study point of view for NG requirement - Short circuit studies (3phase and single phase) Boundary creation and assessment for wider network planning for HV (High Voltage) side 400/275kV Voltage studies -400/275/132Kv (Voltage step change) Thermal studies 400/275/132kV (Contingency analysis), Transformer contingency (N-1, N-2 fault Condition) 1)Substation design modelling 2)Feasibility studies- customer connections offer to utility network 3)Network option assessment 4)Reinforcement work 5)Demand compliance studies on LV side 6)Short circuit studies 7)Contingency analysis N-1 N-2 N-1-D 8)Load flow analysis 9)Voltage studies 10)Per unit analysis 11)How facts device works with detailed engineering Qualifications BE

Project Role : Application Developer Project Role Description : Design, build and configure applications to meet business process and application requirements. Must have skills : SAP for Utilities Billing Good to have skills : NA Minimum 7.5 year(s) of experience is required Educational Qualification : Minimum 15 years full time education Key Responsibilitiesa. Design, configure and build applications to meet business process and application requirementsb. Knowledge in Analyzing requirements and enhancing and building highly optimized standard / custom applications as well as creating Business Process and related technical documentationc. Billing Execution Individual and batch for Daily reporting to Managers.d. Risk identification in your modulee. Knowledge on Analyzing Issues and working on bug fixes Technical Experiencea. Should have hands on knowledge of implementing Billing related enhancements , FQ eventsb. Should have knowledge on Standard Modules used in RICEFW development for Billing Objectsc. Should have good knowledge on all Billing and Invoicing processes like Meter to Cash Cycle, Billing exceptions and reversals, Joint Invoicing, Bill Printing, Collective invoicing and Advance Billing functions like Real Time Pricing and Budget Billingd. Should have understanding of Billing Mater Data and Integration points with Device Management and FICAe. Should have strong De-bugging skills , PWB Professional Attributes1 Good Communication Skill 2 Flexible to work 3 Ability to work under pressure 4 Good Analytical skill and presentation skill 5 Decision making ability Qualification Minimum 15 years full time education