502 Substation Jobs - Page 13

Designing of 132 KV AIS/GIS substation |ETAP| Earthing Calculation | Transformer Sizing | Single Line Diagram | Cable Schedule | Cable Sizing | Electricals | Aramco | Lighting | Erection & Commissioning Engineer | EHV| AutoCAD| Single Line Diagrams

Design, Engineering of Substation and Transmission Line up to 765KV EHV AC and 800KV HVDC. CV should be with passport size photo. You can come for written test and interview directly.

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain and we re looking for talented people who want to help. You ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. The Data Center Engineering Operations Engineer is responsible for ensuring all electrical, mechanical, and fire/life safety equipment within the data center operates within contracted parameters. This role includes risk management, infrastructure maintenance, vendor management, and performance reporting. Key responsibilities include: Managing on-site contractors, sub-contractors, and vendors to ensure all work complies with established practices, procedures, and local legislation. Establishing performance benchmarks, conducting analyses, and preparing reports on all aspects of data center facility infrastructure operations and maintenance. Collaborating with DCO managers (IT), business leaders, and operating partners to coordinate projects, manage capacity, and optimize plant safety, performance, reliability, sustainability, and efficiency. Supporting rack installation and ensuring proper power and cooling provisioning. Implementing and overseeing preventative and corrective maintenance of critical infrastructure. Developing and maintaining metrics for reporting on facility performance and efficiency. Ensuring compliance with safety standards and environmental regulations. Participating in continuous improvement initiatives to enhance data center operations A day in the life Assist in troubleshooting of facility and rack-level events within internal Service Level Agreements (SLA). Perform rack installs, rack decommissioning, and facility management. Provide operational readings and key performance indicators to make sure uptime is maintained. Responsible for the on-site management of contractors, sub-contractors and vendors, ensuring that all work performed is in accordance with established practices, procedures local legislation. Perform and oversee maintenance and operations on all electrical, mechanical, and fire/life safety equipment within the data center. Work schedule changes depending on specific site needs. Shifts can be up to 12-hours and may rotate on a predefined schedule. Some locations have on-call rotations About the team About AWS Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn t followed a traditional path, or includes alternative experiences, don t let it stop you from applying.

GSH is Hiring Electrical Engineer - C License and B License Location: Sriperumbudur & Sunguvarchatram (Tamilnadu) Education: Diploma / B.E - EEE Skills: 110 KV substation Maintenance, 110 KV Switch yard, Electrical Maintenance. Years of experience: 4 to 8 years Salary: For C License 30K to 33K Take home For B License 25K to 28K Take home Ph: 8925322251 Mail: dinesh.prabu@gshgroup.com

We are seeking a skilled and detail-oriented Electrical Maintenance Technician to perform regular maintenance.(Utilities maintenance, sub-station, Transformer)

Select with space bar to view the full contents of the job information. Senior Manager- Design- Civil Substation Job Details | tatacons02 Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: Senior Manager- Design- Civil Substation Purpose Scope of Position The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

Job Title: Store Incharge/ Store Executive- EPC ( Transmission, Substation , Railways) Location: PAN India (Project-Based) Experience: 3 to 16 Years Notice Period : Max 30 days (Preferred 15 Days) Industry: EPC / Power Transmission & Distribution / Substation / Railways / Infrastructure Job Summary: We are seeking a proactive and detail-oriented Store Incharge to manage and oversee material handling, inventory control, and store operations at project sites across India. The ideal candidate will have hands-on experience in EPC projects related to Transmission Lines, Substations, or Railway Electrification , ensuring smooth material flow to meet project timelines and compliance standards. Key Responsibilities: Manage the receipt, inspection, storage, and issuance of project materials, tools, and equipment. Maintain accurate inventory records using ERP systems (SAP, Oracle, etc.). Coordinate with procurement, planning, and site execution teams for timely material availability. Ensure proper documentation of GRN, MRN, Issue Slips, and stock registers. Periodically conduct physical verification of stock and reconcile discrepancies. Monitor material handling, storage conditions, and safety procedures at the store. Maintain minimum stock levels for critical items and raise timely requisitions. Coordinate with logistics for timely dispatch and receipt of materials across project sites. Ensure compliance with company policies and statutory norms related to stores and inventory. Implement best practices in warehouse management and 5S. Qualifications & Skills: Diploma / B.Tech / Graduate in any discipline (Engineering background preferred). 3-16 years of relevant experience in EPC (Transmission, Substation, Railways) projects. Strong knowledge of material handling, inventory control, and documentation. Proficiency in ERP systems and MS Excel. Perks and benefits: Accommodation

Carry out all Engineering jobs as assigned by the Engineering Manager. Minimum experience of 10 years. Knowledge in transformer, Substation, DG, pump house, High mast and Solar system, UPS. Should be an electrical License Holder. Should knowledge on LT/HT/Lines. Should be able to trouble shoot all electrical equipment s and Reach Stackers. Knowledge on handling electrical projects Should be able to maintain weighbridges, boom barriers. Ensure to maintain the facility lux levels at all times. Designing, Implementing, and supporting of new projects. Should follow and prepare the PM compliance, MMBF, Reliability as per company KPI Report on all jobs after completion. Co-ordination with Shift activities and monitoring the electrical activities 24x7. Timely closing of maintenance work orders in oracle. Comply Safety at workplace as per HSE standards. Follow all RA, SOP, PTW, PPE, LOTO procedure in maintenance activities. Immediate response and report during any incident/ b/d.

The opportunity: You will be a part of the GIS LCC Secondary team and support the execution of LCC engineering. Your work involves mainly creating electrical circuit diagrams and supporting documents. We use the E3 tool for generating the schematics. You will be an individual contributor who would deliver the tasks as per the given inputs and when required need to work in coordination with other colleagues and should exhibit good collaborative skills to complete the task. In the absence of your Lead or in some cases, you will be required to interact with our counterparts to get/clarify queries. You may also interact with other departments like Primary, Project Management, and Production. How you ll make an impact: Preparation of LCC schematics for High Voltage Gas Insulated Switchgear (66 kV and above) Preparation of GIS CB / Disconnector / Earthing switch / Fast Acting Earthing switches / CT VT schematics Preparation of JB s for CT, VT, and Density monitors AC / DC Load calculation Preparation of Interlocking table and schematics for various Busbar configurations Addressing the technical queries raised by the customer during the execution of a project, if required. Interaction with various cross-function teams like Primary, Project Management, and Production, when required. Self-reviewing the documents before submitting them to the Lead Engineer Generating Preliminary BOM by understanding the importance and consequences of releasing it Preparation of Mimic boards in line with SLD and Layout drawings Understanding and preparation of Communication Architecture diagrams Preparation of protection schematics (Trafo, Line, Busbar) when we ve integrated protection in LCC Selection of Bay Control Unit and other protection IEDs (Basic level) Preparation of complete Digital LCC drawings as part of Digital Substation (with NCITs, MU s, SAM600 modules, etc. . . ) Preparation of Gas Density monitoring panels using MSM (Modular Switchgear Monitoring) Cable sizing calculation 17. Adhering to applicable codes, practices, QA/QC policies, performance standards, and specifications. Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. (Mandate line to be added). Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your background Years of experience: 2 - 4 years with B. E / Diploma in Electrical Electronics Engineering Excellent knowledge of CAD tools (Good to have experience in e3, not mandatory) Very Good knowledge of Protection Control Systems for T D / Gen Familiarity with codes and applicable standards like IEC, IEEE, ANSI, etc. . . Basic knowledge of GIS Ability to work with multiple discipline projects Ability to work in a team and maintain professionalism Good communication and interpersonal skills Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. .

Technical Project Engineering focuses on a range of engineering disciplines e. g. electrical, mechanical, chemical, civil, structural, automation and software engineering. The activities associated with project engineering include: discipline engineering and design; planning, risk assessments; coordination of resources (personnel and equipment). Key areas of responsibility: Engineering development: Ensuring that engineering is developed with complete information and/or that all multidisciplinary information has been included. Leading development of new solutions for complex projects and challenges. Driving completion of all engineering activities on the project. Coordinating engineering discipline across several projects. Providing technical support for testing, installation and commissioning activities. Designing and conducting experiments, analyzing and interpreting the data. Preparing complete project documents in area of responsibility. May act as a design authority for a particular engineering discipline and completes engineering assignments for that discipline. Providing cost effective quality solutions and delivering within budget and contract. Ensuring adherence to safety standards and mitigation of potential risks. Creating work plans and cost estimates. Reviewing and approving scope, budget and schedule for assignments. Interacts directly with customers, officials, contractors and supply chain. A Senior Professional (P3) applies advanced knowledge of job area typically obtained through advanced education and work experience. Responsibilities may include: Managing projects / processes, working independently with limited supervision. Coaching and reviewing the work of lower level professionals. Problems faced are difficult and sometimes complex. Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. .

About the Company: The Hitachi Energy India Operations Center (INOPC) houses over 3, 000 energy transition technologists in three locations from grid automation, transformers, high voltage products, grid integration and service businesses. Spread over 3, 00, 000 sq feet, with nearly 50, 000 sq feet of dedicated lab space, the center brings under one roof diverse engineering capability that has been built over the years, fostering collaboration to advance the world s energy system to be more sustainable, flexible and secure. INOPC supports Hitachi Energy units across 40+ countries to deliver projects in 80+ countries. We are technology leaders at the forefront of evolving the world s future energy system. The rising energy consumption with changing lifestyles and rapid urbanization, is driving the need for affordable, reliable and sustainable energy. Our innovative technologies help to make the energy system more resilient, secure and safe. Electricity will be the backbone of the carbon-neutral future and together, with customers and partners, we are co-creating solutions that are helping to accelerate the energy transition. Customers count on our technologies to help them to integrate huge volumes of renewable energy into the world s grids and manage increasing levels of complexity; and our technologies are also instrumental to the electrification of transportation, industry and smart life sectors. The center equally focuses on catering to grow complexity in domestic and international grids and is a key lever for Hitachi Energy s growth globally. The opportunity: Project Engineering focuses on designing, communicating, and implementing an operational plan for completing an engineering-based project including: Preparing designs, project controls and specifications, schedules, cost estimates, production, transportation, installation, testing and/or commissioning of new infrastructure, facilities, equipment, etc. Monitoring progress and performance against the project plan; taking action to resolve operational problems and minimize delays. Identifying, developing, and gathering the resources necessary to complete the project. May include preparing engineering standards, designs, and work specifications; developing project schedules, budgets and forecasts; and selecting materials, equipment, project staff, and external contractors An Entry Professional (P1) applies broad theoretical job knowledge typically obtained through advanced education. May require the following proficiency: Work is closely supervised. Problems faced are not typically difficult or complex. Explains facts, policies and practices related to job area . How you ll make an impact: GIS Substation Single Line Diagram, 3D Model, layouts, sections and detailed erection drawings preparation for tenders or projects based on customer specification. Prepare Bill of material for tenders or projects based on requirement. Finalization of Civil Input Requirement, Earthing Cable Tray Layout. Technical data sheets verification of primary equipment. Provide optimized designs on time with standard quality for AIS, GIS, Hybrid and special purpose substations. Adherence to quality system and contribution to its improvement. Vendor evaluation by visiting to their facilities. Responsible for obtaining customer approvals for the designs and drawings. As-built drawings preparation etc. Selection of Components from Product database based on project requirement. Co - ordination with different stakeholders during project execution. Safety and Integrity: Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your Background: Years of experience: 2 - 7 years with Bachelors Engineering /Diploma in Electrical. Proficiency in required CAD design tools (Creo / AutoCAD, 3D competence required). Knowledge of relevant international standards ex. IEEE, IEC etc. Knowledge on High Voltage products. Having knowledge on SAP will be preferred . Proficiency in both spoken written English language is required. Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. .

Job Description Summary As a Lead LV Secondary Engineer you will report to the LV Engineering Manager and will be part of a highly motivated and dynamic team of engineers working on the requirement design integration installation and commissioning of HVDC and AC Control and Protection System. Job Description Roles and Responsibilities Overseeing the overall technical solution that meets customer Requirement. This includes the following actives: Requirement Capture Gap Analysis Define Schematic diagrams requirements of the Control protection system and produce detailed design documentation drawings test specificationand test report. Prepare substation Single line diagrams Protection Single line diagrams and Protection list specification. Prepare Principal diagrams (Interlockings Protection actions Polarities HVDC specific functions) Define Control Panel requirements and produce detailed design documentation for the control system using standard design blocks. This includes the following: Panel Electrical Schematics (using Engineering Base tool) Wire/Cable Schedules Routine Test specification General Assembly drawings Bill of Materials Prepare Technical specification for cabling fibre optic cable list Cable routing Oversee the testing and FAT witnessing of the Control System. Assist site activities relevant to the installation and commissioning of the control system. Interface with equipment supplier and reviewing in-house designs and those produced by external contractors and analyse a variety of engineering data documents and reports. Prepare design models for the new project using available design tools Ensure that design projects are undertaken by competent personnel and sub-contractors reviewing designs created by others Participate in the investigation of technical problems and the establishment of procedures and corrective actions to avoid recurrences. Prepare Bill of Material for LV equipment using available tools. Prepare replies to customer comments on technical submittals in coordination with project management. Attend meeting with customers/contractors/ consultants for technical discussions. Prepare design calculations including DC Load power consumption heat dissipation data calculations. Managing small team on project provide technical guidance and mentoring as necessary Required Qualifications Engineering degree in electrical or electronic engineering. 10 years minimum experience in an EPC project environment in the TD Power Gen or Oil Gas industries with at least 2 projects as an engineer responsible for the business. Motivated to evolve in an international environment recognizes himself in our key values. Good leadership listening and communication skills. Experience in functional team management. Good experience in managing technical interfaces and systems integration. Solid knowledge of conventional substation control system design. Solid experience in the design of control and protection cabinets preferably in high voltage substation or power plant environments. Good knowledge of the control and protection functions of high voltage AC substations Good knowledge of ancillary services engineering in a substation environment and understanding of design/commissioning of secondary systems. Knowledge of networking and telecommunications. Experience with engineering tools such as AutoCAD Engineering Base or Microsoft Visio. About GE Vernova Grid Solutions: At GE Vernova Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Vernova Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Vernova Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. Our engineers are always up for the challenge - and were always driven to find the best solution. Our projects are unique and interesting and youll need to bring a solution-focused positive approach to each one to do your best. Surrounded by committed loyal colleagues if you can dare to bring your ingenuity and desire to make an impact youll be exposed to game-changing diverse projects that truly allow you to play your part in the energy transition. What we offer: - Working in an international team which is part of global Engineering HVDC Centre of Excellence within Grid Integration based in Stafford. - A key role in a dynamic international working environment with a large degree of flexibility of work agreements - Competitive benefits and great development opportunities Additional Information Relocation Assistance Provided: Yes

Major Role and Responsibility: Candidate shall have worked on Detail Engineering of AIS and GIS Substation/Switchyard (66 kV, 132 kV, 220 kV). 400 kV and higher voltage shall be added advantage. Candidate should be aware on CEA, CBIP, IS, IEC, NEC and NFPA guidelines. Candidate should have CTU (PGCIL), STU (GETCO, MSETCL, RJVNPL, KPTCL, UPPTCL etc.) requirement. Candidate should have worked on key SLD, metering & protection SLD, substation plan and elevation, erection key diagram, clearance diagram etc. layout. Candidate should have worked on earthing system design in accordance with IEEE 80 standard. Candidate have experience on working ETAP, CDEGS or equivalent software would be preferred. Candidate should have worked on DSLP (direct storke lightning protection) and lightning risk assessment in line with IEEE 998, Dr. Rezvig Method, IEC 62305 method. Candidate should have worked on auxiliary transformer sizing, DG sizing, battery and battery charger sizing, UPS sizing. Candidate should have knowledge of Protection coordination studies for Switchyard. Candidate should have worked on cable schedule, cable sizing calculation, interconnection schedule. Candidate should have experience of technical procurement support management including technical specifications, offer review, technical bid analysis, vendor document review. Candidate have worked on Owners Engineering on Substation projects shall be added advantage. Candidate have working experience on Solar PV Plant, wind farm, BESS, green hydrogen facility design shall be added advantage. Candidate should have worked on auxiliary power system SLD, load list preparations on Substation. Candidate should have worked on main control room building equipment plan, cable trench layout, earthing layout, lightning protection etc. aspect. Additional Skills Candidate should have BE- Electrical or ME- Electrical degree. Good communication skills. Project Management Skills.

About Company Founded in 2011, ReNew, is one of the largest renewable energy companies globally, with a leadership position in India. Listed on Nasdaq under the ticker RNW, ReNew develops, builds, owns, and operates utility-scale wind energy projects, utility-scale solar energy projects, utility-scale firm power projects, and distributed solar energy projects. In addition to being a major independent power producer in India, ReNew is evolving to become an end-to-end decarbonization partner providing solutions in a just and inclusive manner in the areas of clean energy, green hydrogen, value-added energy offerings through digitalisation, storage, and carbon markets that increasingly are integral to addressing climate change. With a total capacity of more than 13.4 GW (including projects in pipeline), ReNew’s solar and wind energy projects are spread across 150+ sites, with a presence spanning 18 states in India, contributing to 1.9 % of India’s power capacity. Consequently, this has helped to avoid 0.5% of India’s total carbon emissions and 1.1% India’s total power sector emissions. In the over 10 years of its operation, ReNew has generated almost 1.3 lakh jobs, directly and indirectly. ReNew has achieved market leadership in the Indian renewable energy industry against the backdrop of the Government of India’s policies to promote growth of this sector. ReNew’s current group of stockholders contains several marquee investors including CPP Investments, Abu Dhabi Investment Authority, Goldman Sachs, GEF SACEF and JERA. Its mission is to play a pivotal role in meeting India’s growing energy needs in an efficient, sustainable, and socially responsible manner. ReNew stands committed to providing clean, safe, affordable, and sustainable energy for all and has been at the forefront of leading climate action in India. Job Description Key Roles & Responsibilities: Supervising and verifying preventive maintenance as per schedule for solar power plant equipments e.g. Modules, Inverters. Maintained all required documents at site Maintaing daily log books and records Preparing the DGR,weekly,monthly reports Checking inverters and Strings for faults and related. Rectifications, checking and rectification of defective strings and modules. Supervising any breakdown maintenance. Coordinating with OEMs for spares, AMC, warranty and service requests. Upkeep of SCADA and WMS. Monitoring of SCADA and WMS parameters and point out faults to maintenance technicians. Verification of module cleaning as per schedule. Support in JMR activitity Maintaining list of plant related issues and taking up with engineering, contracts, accounts, environment etc. Management of spares/ Man power/Budget Supporting in Energy auditing & reduction of Power Loss through audit and review. Analytics of various plant performance parameters with respect to Plant design (PV syst). Carrying out analysis on case to case basis as required to examine performance efficiency/shortfall if any. Overall data management and MIS reporting for all operational plants Supervision Cleaning of modules and vegitation. Supervision of First Aid box as well Fire Extinguisher periodically. Scrap management Maintaining house keeping/5S and greenery Must Have: B.E / B.Tech in Electrical Engineering 3 to 6 years of experience in solar O&M

Job Summary: We are looking for an experienced and motivated Site Supervisor to oversee and coordinate on-site activities related to utility and infrastructure projects, including HT/LT Line work, cable laying, substation installation, and commissioning. The ideal candidate must have practical knowledge of 11kV and 33kV systems, erection procedures, and utility project standards. Key Responsibilities: Supervise and monitor day-to-day project activities at the site. Coordinate and ensure timely execution of: HT & LT Line erection 11kV / 33kV line works Cable laying and termination Substation and DTC (Distribution Transformer Centre) installation Commissioning activities Ensure all work is done according to safety standards and quality norms. Communicate with engineers, contractors, and vendors to resolve issues. Maintain daily reports, work schedules, and site records. Handle manpower deployment and resource allocation on site. Report site progress and delays to the project manager regularly. Support in the testing and commissioning of transformers, switchyard components, and transmission lines. Key Skills Required: HT Line LT Line Erection Commissioning 11kV & 33kV Systems Cable Laying Substation Installation Utility Projects DTC Installation Switchyard Knowledge Transformers Handling Transmission Line Work Qualifications: ITI / Diploma in Electrical Engineering or related field. 25 years of experience in a similar role preferred. Strong understanding of power distribution systems and utility project execution. Ability to manage labor and subcontractors efficiently. Good communication and reporting skills. Job Type: Full-Time Salary: As per industry standards Location: Pune (field/site based) Role & responsibilities

Role & responsibilities : Maintenance and Testing of Electrical Equipments, Preparation of Test Reports, Site Management etc. Preferred candidate profile : Fresher /Testing engineer (B.Tech/Diploma/ITI) will be preferred.

Job title: Electrical Technician Location: Chennai Salary: 20000 Gross to 29000 Gross Qualification: Diploma in Electrical & Electronics Engineering (EEE) ITI Electrical B.E. in EEE XA

Job Description : Design (Concept, FEED and Detail Design) of Electrical Distribution Systems for - Low Voltage, High Voltage Electrical system based on International standards - for Middle East, Europe, South East Asia regions. Good understanding & Working knowledge of various water and wastewater treatment process and related engineering works-Pumping Stations, Desalination STPs etc. Supporting global multi-disciplinary teams on Water/Waste Water projects. Prepare Design Basis, Load list, Cable schedule, Interconnection Schedule, Single Line Diagrams, schematics, Bulk MTO. Having good understanding on P & ID, Control philosophy and control system architecture. Working knowledge of I/O list ,loop Diagram, Instrument list ,Instrument datasheets is preferred. Perform Equipment sizing calculations e.g. Transformer, Generator, HV/LV Cables, AC UPS, Capacitor Banks. Perform indoor Lighting, outdoor area Illumination and Street Illumination in Dialux or vendor software, calculations for Earthing and Lightning Protection. Hands on experience of System Studies software - ETAP /SKM/Amtech - ability to independently model electrical system and carry out load flow, short circuit, motor starting, protection relay setting studies Prepare technical specifications, technical data sheets for Electrical Equipment - Transformers, DG Sets, Switchgear, UPS, Battery Charger, Distribution Boards, VFDs, Soft Starters etc. Direct experience with (or direct management of teams using) one or more of the following applications will be considered a plus: Bentley AutoPlant, AutoDesk AutoCAD, AutoDesk AutoCAD 3D or AutoDesk Revit MEP. Preparing Request For Quotation(RFQ), review of technical offers and relevant documents from Vendors. Prepare and evaluations of Bid tabulation/documentation Review of vendor drawings for various Electrical Equipment. Familiarity with review of schematics for HV/LV systems. Applies broad practical knowledge to design of Layouts - Equipment Layouts for outdoor/indoor substation, trench/tray layouts, lighting layouts (Should be able to guide/provide inputs to technicians and review from a technical/quality perspective). Coordinate with Designers, Architects, Structural Engineers, Mechanical Engineers and Process Engineers and any other external design consultant, if required Contribute to conceptual report writing and preparation of construction plans and technical specifications. Experience in the application of classified/hazardous areas will be required. All other duties as assigned Candidate Specification : Degree in Electrical Engineering from accredited university. with relevent work experience Relevant experience in Electrical design in a consultancy organisation for Water Sector. Conversant in Electrical design software - Dialux, ETAP. Computer literacy in MS office-an understanding of AUTOCAD is essential. Ability to work in on ones own with lead office as part of integrated team Very good written and oral communication skills Self-motivated with keen interest to learn new skills and add value to the team/organization Location : Mumbai, Bangalore, Noida We can offer (subject to Company s policy): - Agile and safe working environment - Competitive annual leave and sick leaves - Group incentive scheme - Group term life insurance, Workmen s compensation and Group medical insurance coverage - Short and Long-term Global employment opportunities - Global collaboration and knowledge sharing - Digital Innovation and Transformation

Role Objective: To lead and oversee quality assurance and control functions for substation and transmission line projects from the corporate office, ensuring compliance with client specifications, statutory norms, international standards, and internal quality systems. Key Responsibilities: Quality Management System: Ensure adherence to ISO 9001 standards and any other relevant certifications. Conduct periodic internal audits and ensure timely closure of NCRs (Non-Conformance Reports). Project Quality Planning: Prepare Project Quality Plans, Inspection & Test Plans (ITPs), Method Statements, and quality procedures submitted by project teams. Support site teams in establishing project-specific quality control mechanisms. Coordinate with Engineering, Procurement, and Construction teams to integrate quality into all phases of project execution. Support the site quality team for civil works and ensure 100% compliance as per approved FQP for power transmission projects (Sub Station & Transmission Line)- For Civil Stage & Final Inspection (FAT) Witness or Co-ordination with TPIA. - For Electrical. Vendor Quality Assurance: Conduct vendor evaluations and audits to ensure quality compliance in procurement. Monitor third-party inspections and test certifications for critical materials and equipment. Resolve quality issues with vendors and take corrective/preventive actions. Visit to site periodically and ensure 100% compliance for FQP at site. Quality Monitoring & Compliance: Track quality performance indicators across projects. Conduct quality surveillance visits and audits at project sites. Ensure compliance with contractual and regulatory requirements. Documentation & Reporting: Maintain centralized records of quality documentation, test reports, and audit findings. Prepare and submit periodic quality performance reports to top management. Lead root cause analysis and implementation of CAPA (Corrective and Preventive Action). Training & Development: Develop and deliver quality training modules for site QA/QC engineers. Promote quality culture across all levels of the organization. Qualifications & Experience: Education: B.E./B.Tech in Electrical / Civil / Mechanical Engineering. Experience: 7 to 15 years of experience in QA/QC for Transmission/Substation projects; minimum 3 to 5 years in a managerial role at the corporate level.

About Company Founded in 2011, ReNew, is one of the largest renewable energy companies globally, with a leadership position in India. Listed on Nasdaq under the ticker RNW, ReNew develops, builds, owns, and operates utility-scale wind energy projects, utility-scale solar energy projects, utility-scale firm power projects, and distributed solar energy projects. In addition to being a major independent power producer in India, ReNew is evolving to become an end-to-end decarbonization partner providing solutions in a just and inclusive manner in the areas of clean energy, green hydrogen, value-added energy offerings through digitalisation, storage, and carbon markets that increasingly are integral to addressing climate change. With a total capacity of more than 13.4 GW (including projects in pipeline), ReNew’s solar and wind energy projects are spread across 150+ sites, with a presence spanning 18 states in India, contributing to 1.9 % of India’s power capacity. Consequently, this has helped to avoid 0.5% of India’s total carbon emissions and 1.1% India’s total power sector emissions. In the over 10 years of its operation, ReNew has generated almost 1.3 lakh jobs, directly and indirectly. ReNew has achieved market leadership in the Indian renewable energy industry against the backdrop of the Government of India’s policies to promote growth of this sector. ReNew’s current group of stockholders contains several marquee investors including CPP Investments, Abu Dhabi Investment Authority, Goldman Sachs, GEF SACEF and JERA. Its mission is to play a pivotal role in meeting India’s growing energy needs in an efficient, sustainable, and socially responsible manner. ReNew stands committed to providing clean, safe, affordable, and sustainable energy for all and has been at the forefront of leading climate action in India. Job Description 1.To lead all coordination & efforts for preparation, implementation and monitoring of organisation wide safety culture improvement plans 2.To lead the EHS digitization efforts by working closely with Gensuite, Power BI teams 3.Design and lead various organisation wide EHS campaigns, engagement programs, initiatives with objective to improve the safety culture 4.Member/convenor of various corporate, implementation safety committees as per organisation requirement 5.Coordinate with BU HSE/Project/Asset teams for identifying and leading improvements of EHS systems, policies and procedures 6.Support sustainability program on EHS perspective. 7.Carry out Internal Audits at sites 8.Impart Trainings on ReNew specific HSE standards and procedures 9.Analyse HSE related performance for planning future actions 10.Centrally co-ordinate Implementation of Integrated Management System (ISOO 9001, ISO 14001 & ISO 45001) HSE Management and Safety culture Improvement B.Tech / M.Tec in HSE and Fire

Senior Engineer – Electrical Aviation Gurgaon, India We invite you to bring your knowledge of airports Design into play as you Providing electrical engineering solutions for airports as per project requirements. To succeed in this role you must have Bachelor’s/ Master’s Degree in Electrical Engineering with 8 to 15 years of professional experience The ideal candidate should be familiar with ICAO, FAA and DGCA codes and standards with an exposure of working on aviation design assignments Are you our new Senior Engineer - Electrical? Click the apply-button to send your application. Inviting bright minds Do you want to push the boundaries of your profession and develop your excellence in an open, collaborative and empowering culture? We work to create a sustainable future and our inspiring projects and innovative solutions aim to set the standard among our peers. You will join a global company that has been growing successfully since its founding in 1945. Together, we lead and leave a positive impact on societies, companies and people around the world. You will join our Aviation department As our new Senior Engineer – Electrical Aviation you will be part of a committed, performance driven team within Ramboll India. Ramboll is owned by an independent trust and its employees. Your key tasks and responsibilities will be: Planning and Designing of the aviation-based projects contain apron, taxiway, runway, ALCMS, ICT and Security System. Planning and Designing of AGL layouts up to CAT III-B (Including Illuminated Signages, Master Duct layouts, Circuiting, Pits and Chamber) PAPI Siting Calculation, High Mast Calculation & Master Duct Selection Decision support on VDGS, GPU and APU Electrical Design and Planning of CCR Substation. Coordinate Closely with Client and other Stakeholder to ensure seamless project continuity. Responsible for Design activities of electrical systems (HV/MV/LV) including power, lighting, emergency lighting, central battery systems, lighting control, earthing, lightning protection, telecom, security, ELV, BMS and energy management system as assigned. Supervision and Guidance to a team of Senior engineers, Designers, and support personnel. Conduct meetings with client to solve the issue during the project phase. Assures quality control of all the deliverables. Electrical Bids and Tenders. Direct the development of electrical systems specification, technical drawings and topographical maps, ensure that all the designs and specification comply with international standards of safety and security. Your starting point for constant growth From the moment you join Ramboll, we will support your personal and professional development so that you grow with the company. For this role, we believe your starting point is: To have the drive for self-initiative to both win and deliver work Sound engineering skills with exposure to airports designs in India and internationally Experience of working towards contractors and attended to site related queries Good analytical skills and problem-solving techniques Should be a team player Good communication skills Enthusiastic and willing to engage Welcome to our Transport division Ramboll Transport works on some of the biggest and most innovative infrastructure projects in the world. We are close to 4,000 bright minds working within Transport worldwide, creating practical, sustainable and economic solutions for national transport authorities, private contractors and municipalities alike. Ramboll in India Ramboll has more than 1,000 experts working across six locations in India applying their passion to deliver innovative solutions in markets as diverse as Buildings, Transport, Planning, Urban Design, Water, Environment & Health and Energy. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative and empowering culture. How to apply Apply online. Attach your CV, cover letter and relevant documents showcasing why you are the right fit for the role, and when you are available to start. We look forward to receiving your application. Qualification Bachelor’s/ Master’s Degree in Electrical Engineering with 8 to 15 years of professional experience Additional Information How to apply Apply online. Attach your CV, cover letter and relevant documents showcasing why you are the right fit for the role, and when you are available to start. We look forward to receiving your application.

To act in a senior technical capacity in producing WSP engineering related project drawings relating to Primary Engineering for Transmission & Distribution, Renewable (Onshore & Offshore wind/ Solar), BESS projects. This includes (but not limited to): Create detailed engineering drawings for Extra High Voltage (EHV) projects, covering both Air Insulated Substations (AIS) and Gas Insulated Substations (GIS), ranging from 11kV up to 400kV (with a particular emphasis on 132kV voltages and above) Preparation and development of EC&I deliverables such as Single Line Diagrams, loop drawings, cable block diagrams, plant layouts, cable routing, cable containment design and switchgear configurations using both 2D and 3D software packages; Develop darwings to support detailed engineering, such as Land Utilisation Plan, Elevations, Above and Below Grade Conduit layouts, Grounding layout & it s connection details, Lighting and Lightning protection with respective details, Bill of Materials, CDM, MEWP layouts. Facilitate coordination of design activities across various departments, including Civil/Structural, Networks, and Transmission Line. Conduct design reviews, participate in virtual meetings, and collaborate closely with clients. Assist with preparing drawings and revising existing engineering drawings of basic components from specific sketches or layouts. Responsible for adhering to company and client drafting standards and procedures. Responsible for adhering to the drafting practices of selected discipline. Assist in drafting design and documentation for various projects. Coordinate with team members and monitor project schedules, ensuring submissions meet high-quality standards. Maintain compliance to CDM Regulations and all other legal and regulatory requirements associated with the nature of substation and electrical system design. Collaborate with WSP UK office on design activities. Provide guidance and mentorship to less experienced team members. Develop and enhance processes, tools, and potentially implement new technologies into the design process. Periodic Quality check to be conducted for other engineers & designers. Exhibit ingenuity, foresight, and wise decision-making skills in proactively identifying and resolving challenges. Contribute to the progress and growth of departmental tools and workflows aimed at improving the effectiveness of design processes, specification development, and project implementation. Engage in training sessions and meetings dedicated to addressing targeted organizational initiatives. Qualifications Possess a Diploma or Degree in electrical engineering from an accredited institution. Have a minimum of five years and a maximum of ten years of experience in the field of Substation Transmission & Distribution, Renewable (Onshore & Offshore wind/ Solar), BESS projects. Experience on working in Raster image files. Preferably familiar with UK projects. Experience of working in a lead substation design role on National Grid Electricity Transmission projects (or other UK utilities like SSEN, SPEN etc.) in the UK will be an added advantage. Experience in Onshore wind, Offshore wind, Renewable (solar) and BESS projects is preferred. Familiarity with 3D tools (Revit) for Engineering design is desirable. Excellent verbal and written communication skills. Strong problem solving and analytical skills. Basic knowledge and experience in Microsoft Office programs, including, Word, Excel, PowerPoint, and Outlook. Demonstrated leadership skills. Self-motivated and eager learner, aptitude to grow and develop within the field.

Position: Tender Quotation Specialist Location : Chennai (Candidates must be willing to relocate) Experience Range : 6- 12 years Qualification: Bachelors Engineering Main Accountabilities: Tendering authority for all tenders with medium to high complexity. Create and complete bids/estimations/quotations based on end customer specification or customer requirements/budget in liaising with the Operating Units Tendering team, having close collaboration with all the tendering stakeholders and take full tender responsibility. Coordinate with all the tendering stakeholders, OU Tendering team, Engineering Leads, Project managers, SCM, end customers, consultants, Contracts & legal team, HSE & Quality, etc and provide required support in each Tender Able to perform the following activities : Taking complete responsibility for the tenders prepared from IN Operation Center with appropriate inputs from the different stakeholders of the team in-line with LOM Tendering process seeking necessary inputs from the Operating Units tendering team. Understanding of Sales process, Sales tools & techniques, Market & Business Intelligence, Sales drive Supporting sales strategy & facilitating capture team selling Knowledge in assessing the pre-qualification requirements and supporting the Sales team for Bid/No Bid decision Create and review Tender Solution Strategy. Target Pricing in discussion with Operating units Complete Understanding of Single line diagrams & Equipment arrangement layouts. Reviewing the proposals towards optimized and customized solutions for various substation tenders (AIS, GIS, Hybrid). Innovative ideas to prepare a cost effective solution Technical data sheets verification of primary equipment. Knowledge of primary equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc with minimal support from Engineering team Collaborate with SCM having good understanding about strategic sourcing and do Vendor Offer evaluations. Finalize the tender sourcing plan appropriately. Analyze the risk probability & severity of the tenders from technical, commercial, contractual perspectives & drive the mitigation strategy liasing with the different disciplines. Should be handling the risk review process and getting the approval from different management levels based on the tender volume & the risks involved Review Cash flow documents and the inputs from Contracts & legal teams and take conclusive decisions during submissions Directly responsible for the complete documentation for respective tenders as per the client requirement Handing over the awarded projects to the respective project managers.

Meinhardt Singapore India Office is urgently looking forward to having you join our team of world-class professionals. We have an opening for an experienced Electrical Design Engineer with minimum 10 years of relevant experience.

Role & responsibilities Perform technical and commercial evaluation of vendor bids for various electrical packages Prepare key Single Line Diagrams (SLDs), schematic and layout drawings Select control and protection schemes based on project requirements Electrical sizing and specification of equipment such as transformers, switchgears, GCBs, bus ducts, DG sets, UPS, and DC systems Lead and mentor the electrical design team throughout the project lifecycle Preferred candidate profile B.E. / B.Tech in Electrical Engineering 515 years of hands-on experience in electrical design engineering Strong background in high voltage system design, including switchyards and power distribution Proficient in equipment specification preparation, tender evaluation, and drawing review Skilled in power system studies, earthing and lighting calculations, cable routing, and substation layouts Must have experience in Power Plant or Oil & Gas sector Familiarity with international electrical codes and standards Strong leadership and team management skills Immediate joiners will be given preference. Interested Candidates May Contact: Ankit Shetty Sr. HR Recruiter- +91 7718888269 Email: ankit.shetty@wisecor.in