118 Stm Jobs - Page 2

Job Description Job ID#: 15206 Discipline: Telecommunications Language: English Our client is bidding for work on the Mumbai-Ahmedabad High Speed Rail (MAHSR) and they are seeking suitably qualified and experienced candidates for the role of Chief Expert-SCADA. This bid will close in October 2025 and the work is expected to start around March 2026. Location: Mumbai / Ahmedabad / Surat Background: The Mumbai-Ahmedabad High Speed Rail (MAHSR) corridor spans approximately 508 km with 12 planned stations between Mumbai and Sabarmati, along with three major depots. The system will be operated using ETCS Level 2, with the main Operational Control Centre (OCC) at Sabarmati and a functional OCC at Surat Depot, later serving as a Backup Control Centre (BCC) for redundancy and training. The Consultant is responsible for full compliance with ETCS Level 2 specifications, including subsystem verification (balises, RBCs, LEUs, and onboard units) in line with ERA TSI standards, validation of configuration data for trackside and onboard components, and ensuring traceability across version-controlled records. Additional responsibilities include participation in closed-loop testing of ETCS components, covering radio communication, balise integrity, and fallback scenarios (including STM interfacing if relevant). In case the OCC is inoperable, centralized control will be shifted to the BCC. Indigenous rolling stock, with a maximum operational speed of 249 kmph and design speed of 280 kmph, is being developed by ICF Chennai and will be tested on the corridor, which has been designed for a maximum speed of 350 kmph and intended to operate progressively up to 320 kmph as designated rolling stock becomes available. Job Requirements - Expert Type: International - Total Experience Requirement: Overall 25 years in Infrastructure Projects - Relevant Experience Requirement: Minimum 15years in SCADA (Rail-based Transit) $$ - Specific Experience Requirement: Minimum 5years as in-charge SCADA (High-Speed Rail) $ $$ :- Rail-based Transit System project(s) shall mean High-Speed Railways / Semi High-Speed Railways / Metro Railways projects as defined below: $ = High-Speed Railways projects (ETCS based): Operational speed equal or greater than 250 Kmph shall only be considered for evaluation. *Semi High-Speed Railways (Urban / Suburban / Intercity / Regional Passenger Transit Systems): Projects with operational speed equal to or greater than 160 Kmph shall only be considered for evaluation. Copies of relevant degree certificates must be enclosed with the CV to verify compliance with the minimum qualification criteria. Work experience as "in-charge shall mean experience as the Leader/Head/Chief/Senior Principal Engineer or as the Dy. Lead/Dy. Head/Dy. Chief/Principal Engineer for the specific discipline/domain as required against the position.

Please enter a valid recipient email address.. Help us prevent spam by entering the words below Share this with your friends Select your email service Write your comment here... You successfully shared to What didnt work: Your message could not be shared to How to fix it: Log back in to complete your share: Your message was successfully shared to Your Facebook authorization has expired - log in . Log back in to complete your share: Pick one or more destinations: Rail PersonnelCareer Portal Home Page Search All Jobs Job Details Chief Expert-Telecommunication System Job Description Our client is bidding for work on the Mumbai-Ahmedabad High Speed Rail (MAHSR) and they are seeking suitably qualified and experienced candidates for the role of Chief Expert-Telecommunication System. This bid will close in October 2025 and the work is expected to start around March 2026. Location: Mumbai / Ahmedabad / Surat Background: The Mumbai-Ahmedabad High Speed Rail (MAHSR) corridor spans approximately 508 km with 12 planned stations between Mumbai and Sabarmati, along with three major depots. The system will be operated using ETCS Level 2, with the main Operational Control Centre (OCC) at Sabarmati and a functional OCC at Surat Depot, later serving as a Backup Control Centre (BCC) for redundancy and training. The Consultant is responsible for full compliance with ETCS Level 2 specifications, including subsystem verification (balises, RBCs, LEUs, and onboard units) in line with ERA TSI standards, validation of configuration data for trackside and onboard components, and ensuring traceability across version-controlled records. Additional responsibilities include participation in closed-loop testing of ETCS components, covering radio communication, balise integrity, and fallback scenarios (including STM interfacing if relevant). In case the OCC is inoperable, centralized control will be shifted to the BCC. Indigenous rolling stock, with a maximum operational speed of 249 kmph and design speed of 280 kmph, is being developed by ICF Chennai and will be tested on the corridor, which has been designed for a maximum speed of 350 kmph and intended to operate progressively up to 320 kmph as designated rolling stock becomes available. Job Requirements - Expert Type: International - Total Experience Requirement: Overall 25 years in Infrastructure Projects - Relevant Experience Requirement: Minimum 15 years in Telecommunication (Rail-based Transit) $$ - Specific Experience Requirement: Minimum 5years as in-charge Telecommunication (High-Speed Rail) 250 kmph $$ :- Rail-based Transit System project(s) shall mean High-Speed Railways / Semi High-Speed Railways / Metro Railways projects as defined below: $ = High-Speed Railways projects (ETCS based): Operational speed equal or greater than 250 Kmph shall only be considered for evaluation. *Semi High-Speed Railways (Urban / Suburban / Intercity / Regional Passenger Transit Systems): Projects with operational speed equal to or greater than 160 Kmph shall only be considered for evaluation. Copies of relevant degree certificates must be enclosed with the CV to verify compliance with the minimum qualification criteria. Work experience as "in-charge shall mean experience as the Leader/Head/Chief/Senior Principal Engineer or as the Dy. Lead/Dy. Head/Dy. Chief/Principal Engineer for the specific discipline/domain as required against the position.

Please enter a valid recipient email address.. Help us prevent spam by entering the words below Share this with your friends Select your email service Write your comment here... You successfully shared to What didnt work: Your message could not be shared to How to fix it: Log back in to complete your share: Your message was successfully shared to Log back in to complete your share: Pick one or more destinations: Rail PersonnelCareer Portal Home Page Job Details Chief Expert-Signalling System Job Description Our client is bidding for work on the Mumbai-Ahmedabad High Speed Rail (MAHSR) and they are seeking suitably qualified and experienced candidates for the role of Chief Expert-Signalling System. This bid will close in October 2025 and the work is expected to start around March 2026. Location: Mumbai / Ahmedabad / Surat Background: The Mumbai-Ahmedabad High Speed Rail (MAHSR) corridor spans approximately 508 km with 12 planned stations between Mumbai and Sabarmati, along with three major depots. The system will be operated using ETCS Level 2, with the main Operational Control Centre (OCC) at Sabarmati and a functional OCC at Surat Depot, later serving as a Backup Control Centre (BCC) for redundancy and training. The Consultant is responsible for full compliance with ETCS Level 2 specifications, including subsystem verification (balises, RBCs, LEUs, and onboard units) in line with ERA TSI standards, validation of configuration data for trackside and onboard components, and ensuring traceability across version-controlled records. Additional responsibilities include participation in closed-loop testing of ETCS components, covering radio communication, balise integrity, and fallback scenarios (including STM interfacing if relevant). In case the OCC is inoperable, centralized control will be shifted to the BCC. Indigenous rolling stock, with a maximum operational speed of 249 kmph and design speed of 280 kmph, is being developed by ICF Chennai and will be tested on the corridor, which has been designed for a maximum speed of 350 kmph and intended to operate progressively up to 320 kmph as designated rolling stock becomes available. Job Requirements - Expert Type: International - Total Experience Requirement: Overall 25 years in Infrastructure Projects - Relevant Experience Requirement: Minimum 15 years in Signalling (High-Speed ETCS with 250kmph/Semi High-Speed Rail i.e. Urban/Suburban/ Intercity/ Regional Passenger Transit Systems, projects with operational speed equal or greater than 160 Kmph. - Specific Experience Requirement: Minimum 5years as in-charge ETCS Signalling (High-Speed Rail) $ 250 kmph $$ :- Rail-based Transit System project(s) shall mean High-Speed Railways / Semi High-Speed Railways / Metro Railways projects as defined below: $ = High-Speed Railways projects (ETCS based): Operational speed equal or greater than 250 Kmph shall only be considered for evaluation. *Semi High-Speed Railways (Urban / Suburban / Intercity / Regional Passenger Transit Systems): Projects with operational speed equal to or greater than 160 Kmph shall only be considered for evaluation. Copies of relevant degree certificates must be enclosed with the CV to verify compliance with the minimum qualification criteria. Work experience as "in-charge shall mean experience as the Leader/Head/Chief/Senior Principal Engineer or as the Dy. Lead/Dy. Head/Dy. Chief/Principal Engineer for the specific discipline/domain as required against the position.

Please enter a valid recipient email address.. Help us prevent spam by entering the words below Share this with your friends Select your email service Write your comment here... You successfully shared to What didnt work: Your message could not be shared to How to fix it: Log back in to complete your share: Your message was successfully shared to Your Facebook authorization has expired - log in . Log back in to complete your share: Pick one or more destinations: Rail PersonnelCareer Portal Home Page Search All Jobs Job Details Chief Expert-Overall ITC Job Description Our client is bidding for work on the Mumbai-Ahmedabad High Speed Rail (MAHSR) and they are seeking suitably qualified and experienced candidates for the role of Chief Expert-Overall ITC. This bid will close in October 2025 and the work is expected to start around March 2026. Location: Mumbai / Ahmedabad / Surat Background: The Mumbai-Ahmedabad High Speed Rail (MAHSR) corridor spans approximately 508 km with 12 planned stations between Mumbai and Sabarmati, along with three major depots. The system will be operated using ETCS Level 2, with the main Operational Control Centre (OCC) at Sabarmati and a functional OCC at Surat Depot, later serving as a Backup Control Centre (BCC) for redundancy and training. The Consultant is responsible for full compliance with ETCS Level 2 specifications, including subsystem verification (balises, RBCs, LEUs, and onboard units) in line with ERA TSI standards, validation of configuration data for trackside and onboard components, and ensuring traceability across version-controlled records. Additional responsibilities include participation in closed-loop testing of ETCS components, covering radio communication, balise integrity, and fallback scenarios (including STM interfacing if relevant). In case the OCC is inoperable, centralized control will be shifted to the BCC. Indigenous rolling stock, with a maximum operational speed of 249 kmph and design speed of 280 kmph, is being developed by ICF Chennai and will be tested on the corridor, which has been designed for a maximum speed of 350 kmph and intended to operate progressively up to 320 kmph as designated rolling stock becomes available. Job Requirements - Expert Type: International - Total Experience Requirement: Overall 25 years in Infrastructure Projects - Relevant Experience Requirement: Minimum 15 years in Integration, Testing & Commissioning (ITC) including O&M (Rail-based Transit) $$ - Specific Experience Requirement: Minimum 5 years as in-charge ITC (High-Speed Rail) $ 250 kmph $$ :- Rail-based Transit System project(s) shall mean High-Speed Railways / Semi High-Speed Railways / Metro Railways projects as defined below: $ = High-Speed Railways projects (ETCS based): Operational speed equal or greater than 250 Kmph shall only be considered for evaluation. *Semi High-Speed Railways (Urban / Suburban / Intercity / Regional Passenger Transit Systems): Projects with operational speed equal to or greater than 160 Kmph shall only be considered for evaluation. Copies of relevant degree certificates must be enclosed with the CV to verify compliance with the minimum qualification criteria. Work experience as "in-charge shall mean experience as the Leader/Head/Chief/Senior Principal Engineer or as the Dy. Lead/Dy. Head/Dy. Chief/Principal Engineer for the specific discipline/domain as required against the position.

Design analog and mixed-signal circuits using op-amps, transistors, MOSFETs, transformers, relays, and diodes. Develop sensor interface circuits using signal conditioning and ADCs. Interface sensors for temperature, pressure, physical parameters.

POSITION SUMMARY: The STM Senior Specialist position is critical to ensuring the timely boarding of new and seasoned mortgage loans. The Senior Specialist works on data received from Sellers/Servicers to check data accuracy and perform logical checks through Databases. Also, the Senior Specialist needs to coordinate with internal business units as well as clients/servicers to obtain clarification on missing or inaccurate data. JOB FUNCTIONS AND RESPONSIBILITIES Review inbound loan boarding files and get the loan boarded within TAT Perform Logical check to confirm the data availability and accuracy Analyzes boarding error messages to determine root cause and remediates Perform testing to support trials and production. Review error reports and document/communicate issues found. Determine solutions for issues. Define requirements for and implement tools and processes to improve data quality and visibility Produce and review required control reporting Escalate any possible deadline misses Coordinate with other Business Units/Clients/Servicers to obtain clarification on data Follow all established procedures regarding boarding/deboarding Ensure all quality steps are completed and documented Willing to work extra hours as per the process requirements/Flexibility to work in accordance with Business requirements Ensure to handle all the assigned day to day boarding loans from the different clients Monitors STM related Mailboxes to ensure all email communications are being handled timely and appropriately Ensure all documentation provided to prior/new servicers are updated and communicated Assist with data mapping questions and ensure all data elements are available Ensure all artifacts, correspondence delivery related to loan boarding/deboarding activities are obtained/completed Communicate regularly with internal and external partners regarding loan boarding/deboarding process Ensure all quality steps are completed Ensure all images and post boarding activities are completed within required timeframes Self-driven, should be able to handle high pressure Timely responses to servicers and internal parties Identifying areas of process improvements Designing process enhancements for STM Handling of Ad-hoc queries from various team and providing appropriate details as required Re-engineering existing process to be able to produce optimized and efficient data output EDUCATION / EXPERIENCE Experience in MSP & Mortgage servicing is mandatory. This position requires a significant amount of mortgage servicing knowledge, including but not limited to, the ability to identify and understand various data points utilized within loan servicing systems to successfully service loans and interpret mortgage loan collateral and loan servicing documentation used in conjunction with the data to service loans. Ability to work effectively with global cross-functional teams in a fast-paced environment. Ability to work independently, meet established deadlines and be very detailed orientated and have excellent organizational skills. Strong analytical and problem-solving skills and attention to detail and accuracy Excellent communications (verbal and written) as well as presentation skills Ability to solve complex problems. Aggressive follow up skills and superior organizational skills are a must. A graduate degree from an accredited university is required. Should have completed 12 months in the organization and 9 months in the current role. Experience with different loan programs such as ARM s, HELOC s, buydowns etc. Bachelor s Degree preferred, or minimum of five (5) + years mortgage servicing experience. Advanced PC skills: Microsoft applications, including Excel and Access Database, Monarch, Adobe, SharePoint and LoanSphere Loan Boarding (LLB). Strong analytical and problem-solving skills and attention to detail and accuracy . Organization skills to be able to handle multiple transactions at the same time Ability to identify inconsistencies or issues in data and help come up with solutions Proven strength in interpreting business requirements and implementing them in application or operational tools. No documented disciplinary action in the past 12 months. Should have an Appraisal rating of Fully Meets Expectations or above in the last completed performance cycle. WORK SCHEDULE OR TRAVEL REQUIREMENTS Night Shift

POSITION SUMMARY: The STM Senior Specialist position is critical to ensuring the timely boarding of new and seasoned mortgage loans. The Senior Specialist works on data received from Sellers/Servicers to check data accuracy and perform logical checks through Databases. Also, the Senior Specialist needs to coordinate with internal business units as well as clients/servicers to obtain clarification on missing or inaccurate data. JOB FUNCTIONS AND RESPONSIBILITIES Review inbound loan boarding files and get the loan boarded within TAT Perform Logical check to confirm the data availability and accuracy Analyzes boarding error messages to determine root cause and remediates Perform testing to support trials and production. Review error reports and document/communicate issues found. Determine solutions for issues. Define requirements for and implement tools and processes to improve data quality and visibility Produce and review required control reporting Escalate any possible deadline misses Coordinate with other Business Units/Clients/Servicers to obtain clarification on data Follow all established procedures regarding boarding/deboarding Ensure all quality steps are completed and documented Willing to work extra hours as per the process requirements/Flexibility to work in accordance with Business requirements Ensure to handle all the assigned day to day boarding loans from the different clients Monitors STM related Mailboxes to ensure all email communications are being handled timely and appropriately Ensure all documentation provided to prior/new servicers are updated and communicated Assist with data mapping questions and ensure all data elements are available Ensure all artifacts, correspondence delivery related to loan boarding/deboarding activities are obtained/completed Communicate regularly with internal and external partners regarding loan boarding/deboarding process Ensure all quality steps are completed Ensure all images and post boarding activities are completed within required timeframes Self-driven, should be able to handle high pressure Timely responses to servicers and internal parties Identifying areas of process improvements Designing process enhancements for STM Handling of Ad-hoc queries from various team and providing appropriate details as required Re-engineering existing process to be able to produce optimized and efficient data output EDUCATION / EXPERIENCE Experience in MSP & Mortgage servicing is mandatory. This position requires a significant amount of mortgage servicing knowledge, including but not limited to, the ability to identify and understand various data points utilized within loan servicing systems to successfully service loans and interpret mortgage loan collateral and loan servicing documentation used in conjunction with the data to service loans. Ability to work effectively with global cross-functional teams in a fast-paced environment. Ability to work independently, meet established deadlines and be very detailed orientated and have excellent organizational skills. Strong analytical and problem-solving skills and attention to detail and accuracy Excellent communications (verbal and written) as well as presentation skills Ability to solve complex problems. Aggressive follow up skills and superior organizational skills are a must. A graduate degree from an accredited university is required. Should have completed 12 months in the organization and 9 months in the current role. Experience with different loan programs such as ARM s, HELOC s, buydowns etc. Bachelor s Degree preferred, or minimum of five (5) + years mortgage servicing experience. Advanced PC skills: Microsoft applications, including Excel and Access Database, Monarch, Adobe, SharePoint and LoanSphere Loan Boarding (LLB). Strong analytical and problem-solving skills and attention to detail and accuracy . Organization skills to be able to handle multiple transactions at the same time Ability to identify inconsistencies or issues in data and help come up with solutions Proven strength in interpreting business requirements and implementing them in application or operational tools. No documented disciplinary action in the past 12 months. Should have an Appraisal rating of Fully Meets Expectations or above in the last completed performance cycle. WORK SCHEDULE OR TRAVEL REQUIREMENTS Night Shift

Embedded Firmware Engineer with 3–5 years exp. in C/C++, microcontrollers & RTOS. Skilled in NXP SE050 integration, I2C/UART, cryptography & embedded security. Proficient in debugging, secure firmware dev & Git-based version control.

Develop embedded software for 8 to 64-bit microcontrollers and microprocessors, Design, define, specify, implement, and test embedded systems products, schematics and PCB development, Perform board-level testing, documentation Required Candidate profile Experienced in embedded software development for 8–64 bit microcontrollers with strong expertise in system design, PCB development, and board-level testing.

Role Purpose The purpose of the role is to resolve, maintain and manage clients software/ hardware/ network based on the service requests raised from the end-user as per the defined SLAs ensuring client satisfaction Do Ensure timely response of all the tickets raised by the client end user Service requests solutioning by maintaining quality parameters Act as a custodian of clients network/ server/ system/ storage/ platform/ infrastructure and other equipments to keep track of each of their proper functioning and upkeep Keep a check on the number of tickets raised (dial home/ email/ chat/ IMS), ensuring right solutioning as per the defined resolution timeframe Perform root cause analysis of the tickets raised and create an action plan to resolve the problem to ensure right client satisfaction Provide an acceptance and immediate resolution to the high priority tickets/ service Installing and configuring software/ hardware requirements based on service requests 100% adherence to timeliness as per the priority of each issue, to manage client expectations and ensure zero escalations Provide application/ user access as per client requirements and requests to ensure timely solutioning Track all the tickets from acceptance to resolution stage as per the resolution time defined by the customer Maintain timely backup of important data/ logs and management resources to ensure the solution is of acceptable quality to maintain client satisfaction Coordinate with on-site team for complex problem resolution and ensure timely client servicing Review the log which Chat BOTS gather and ensure all the service requests/ issues are resolved in a timely manner Mandatory Skills: TIS Service Desk. Experience: 1-3 Years.

Role Purpose The purpose of the role is to resolve, maintain and manage clients software/ hardware/ network based on the service requests raised from the end-user as per the defined SLAs ensuring client satisfaction Do Ensure timely response of all the tickets raised by the client end user Service requests solutioning by maintaining quality parameters Act as a custodian of clients network/ server/ system/ storage/ platform/ infrastructure and other equipments to keep track of each of their proper functioning and upkeep Keep a check on the number of tickets raised (dial home/ email/ chat/ IMS), ensuring right solutioning as per the defined resolution timeframe Perform root cause analysis of the tickets raised and create an action plan to resolve the problem to ensure right client satisfaction Provide an acceptance and immediate resolution to the high priority tickets/ service Installing and configuring software/ hardware requirements based on service requests 100% adherence to timeliness as per the priority of each issue, to manage client expectations and ensure zero escalations Provide application/ user access as per client requirements and requests to ensure timely solutioning Track all the tickets from acceptance to resolution stage as per the resolution time defined by the customer Maintain timely backup of important data/ logs and management resources to ensure the solution is of acceptable quality to maintain client satisfaction Coordinate with on-site team for complex problem resolution and ensure timely client servicing Review the log which Chat BOTS gather and ensure all the service requests/ issues are resolved in a timely manner Mandatory Skills: TIS Service Desk. Experience: 3-5 Years.

Role Purpose The purpose of the role is to resolve, maintain and manage clients software/ hardware/ network based on the service requests raised from the end-user as per the defined SLAs ensuring client satisfaction Do Ensure timely response of all the tickets raised by the client end user Service requests solutioning by maintaining quality parameters Act as a custodian of clients network/ server/ system/ storage/ platform/ infrastructure and other equipments to keep track of each of their proper functioning and upkeep Keep a check on the number of tickets raised (dial home/ email/ chat/ IMS), ensuring right solutioning as per the defined resolution timeframe Perform root cause analysis of the tickets raised and create an action plan to resolve the problem to ensure right client satisfaction Provide an acceptance and immediate resolution to the high priority tickets/ service Installing and configuring software/ hardware requirements based on service requests 100% adherence to timeliness as per the priority of each issue, to manage client expectations and ensure zero escalations Provide application/ user access as per client requirements and requests to ensure timely solutioning Track all the tickets from acceptance to resolution stage as per the resolution time defined by the customer Maintain timely backup of important data/ logs and management resources to ensure the solution is of acceptable quality to maintain client satisfaction Coordinate with on-site team for complex problem resolution and ensure timely client servicing Review the log which Chat BOTS gather and ensure all the service requests/ issues are resolved in a timely manner Mandatory Skills: TIS Service Desk.

Role Purpose The purpose of the role is to resolve, maintain and manage clients software/ hardware/ network based on the service requests raised from the end-user as per the defined SLAs ensuring client satisfaction Do Ensure timely response of all the tickets raised by the client end user Service requests solutioning by maintaining quality parameters Act as a custodian of clients network/ server/ system/ storage/ platform/ infrastructure and other equipments to keep track of each of their proper functioning and upkeep Keep a check on the number of tickets raised (dial home/ email/ chat/ IMS), ensuring right solutioning as per the defined resolution timeframe Perform root cause analysis of the tickets raised and create an action plan to resolve the problem to ensure right client satisfaction Provide an acceptance and immediate resolution to the high priority tickets/ service Installing and configuring software/ hardware requirements based on service requests 100% adherence to timeliness as per the priority of each issue, to manage client expectations and ensure zero escalations Provide application/ user access as per client requirements and requests to ensure timely solutioning Track all the tickets from acceptance to resolution stage as per the resolution time defined by the customer Maintain timely backup of important data/ logs and management resources to ensure the solution is of acceptable quality to maintain client satisfaction Coordinate with on-site team for complex problem resolution and ensure timely client servicing Review the log which Chat BOTS gather and ensure all the service requests/ issues are resolved in a timely manner Mandatory Skills: TIS Service Desk.Experience: 3-5 Years.

Role Purpose The purpose of the role is to resolve, maintain and manage clients software/ hardware/ network based on the service requests raised from the end-user as per the defined SLAs ensuring client satisfaction Do Ensure timely response of all the tickets raised by the client end user Service requests solutioning by maintaining quality parameters Act as a custodian of clients network/ server/ system/ storage/ platform/ infrastructure and other equipments to keep track of each of their proper functioning and upkeep Keep a check on the number of tickets raised (dial home/ email/ chat/ IMS), ensuring right solutioning as per the defined resolution timeframe Perform root cause analysis of the tickets raised and create an action plan to resolve the problem to ensure right client satisfaction Provide an acceptance and immediate resolution to the high priority tickets/ service Installing and configuring software/ hardware requirements based on service requests 100% adherence to timeliness as per the priority of each issue, to manage client expectations and ensure zero escalations Provide application/ user access as per client requirements and requests to ensure timely solutioning Track all the tickets from acceptance to resolution stage as per the resolution time defined by the customer Maintain timely backup of important data/ logs and management resources to ensure the solution is of acceptable quality to maintain client satisfaction Coordinate with on-site team for complex problem resolution and ensure timely client servicing Review the log which Chat BOTS gather and ensure all the service requests/ issues are resolved in a timely manner Mandatory Skills: TIS Service Desk. Experience: 1-3 Years.

Required Technical Skills: Strong knowledge in C++/C • Good experience in Linux/RTOS based embedded software development. • Hands on experience in developing drivers for CAN, RS232, SPI, I2C, USB Timers, Graphics LCD, EEPROM or Flash interfaces. • Experience with Microcontrollers STM32, ESP32, Renesas controllers. • Experience in Debugging, Troubleshooting Embedded systems using Emulators, JTAG \BDM Debuggers etc. please share your resume at poojathatikonda@mirafra.com

Responsibilities : * Design software architecture and develop embedded programs & system protocols. * Conduct testing, debugging, and troubleshooting of embedded systems. * Experience with firmware development for industrial automation, hardware testing Required Candidate profile * Min 3 yrs of exp, C,C++ * Hardware (ARM/MIPS/x86) * Protocols(USB, UART, I2C, SPI, RS-485, Modbus) * Tools (STM32 Cube Programmer, Keil, Docklight, IO Ninja) * OS Platforms: Linux, Unix, RTOS

Experience: 0-2 years or pursuing undergraduate Location: Bengaluru, Karnataka, India(onsite only) Employment Type: Internship(convertible to fulltime) Preferred Background: Robotics, Medical Devices, Product Design Responsibilities Develop, test, debug, and modify embedded system software for microcontrollers and development boards. Prototype circuit boards and apply basic analog engineering for embedded development support. Design and debug analog circuits, including schematic and PCB design. Document designs thoroughlyschematics, component choices, and test procedures. Collaborate across teams (hardware, software, testing) to integrate systems and ensure project success. Qualifications BTech (completed/pursuing) in Electronics, Electrical, Mechatronics, or related fields. Hands-on experience with embedded systems (Arduino, Raspberry Pi, STM), sensors, motors, and DIY/personal/academic projects. Proficient in embedded communication protocols (SPI, I2C, CAN, UART) and control algorithms (PID, LCQ). Strong C++ programming skills, algorithm understanding, bit manipulation, RTOS/ROS experience. Skilled in circuit design, schematic reading, PCB design, and thrives in fast-paced, team-driven environments. Show more Show less

You will be part of Boon (formerly known as Swajal), an organization with a mission to ensure equitable access to drinking water for all. Collaborating with various sectors like villages, hotels, train stations, airports, hospitals, and schools, we are dedicated to creating a better future for everyone. As an Embedded Developer, your responsibilities will include working closely with designers and engineering teams to outline technical requirements, creating program architecture based on project needs and hardware specifications, coding software, embedded programs, and system protocols. You will also be responsible for testing embedded software systems for proper integration, troubleshooting any errors or inefficiencies, and implementing necessary repairs, modifications, and upgrades. Additionally, you will manage project timelines, report any delays to the supervisor, generate diagnostic reports, technical manuals, and software development documentation, as well as maintain embedded software systems and perform maintenance tasks when required. To qualify for this role, you should possess a bachelor's degree in Electronics and Communication or a related field, along with a minimum of three years of experience as an embedded developer. Proficiency in programming languages like C and C++, as well as a deep understanding of hardware architecture (e.g., ARM, Atmel, STM, ESP32) and hardware protocols (e.g., USB, UART, I2C, SPI) are essential. Strong diagnostic, analytical, and problem-solving skills, along with excellent organizational and project management abilities, will be crucial in this role. Furthermore, staying updated with the latest technological advancements and techniques is expected.,

As an Embedded Firmware Engineer, you will be responsible for developing firmware for Water/Gas/Energy utilities using IoT & AI technologies. Specifically, you will work on LV IoT products and be involved in MCU firmware development using C. Your tasks will include integrating analog inputs, coding for serial protocols like UART, I2C, SPI, and creating logic to drive actions and decisions in MCUs. Additionally, you will develop embedded computational algorithms and conduct code and system testing to ensure bug closures till the burn-in stages. To be successful in this role, you should have 1-3 years of relevant experience in the following technical skills: - MCU firmware development using C - Integration of analog inputs - Coding for serial protocols like UART, I2C, SPI - Building logic for driving actions and decisions in MCUs - Developing embedded computational algorithms - Working with MCU architecture, workspace architecture, and toolchain including debugger and coding suite for RL78, STM, PIC, Arduino, NXP MCUs Experience with Utilities and/or a background in Electrical Engineering (ECE/EEE/EIE) is essential for this position. Exposure and experience in developing Ship Ready Firmware for Commercial Embedded Products is highly desirable. This position is based in Ameerpet, Hyderabad. If you are interested in this opportunity, please share your resume with us at hr@ripplemetering.com. References are most welcome.,

Thieme is an award-winning international medical and scientific publisher with a rich history of 130+ years. Thieme has demonstrated its commitment to the highest standard of quality in the state-of-art content and presentation of all of its products. Thieme is a multinational company with offices in 4 countries, Stuttgart Germany, New York the U.S.A., Noida India, and Rio Brazil. Job Summary: The Content Strategist will lead the development of textbook-based content with supporting digital ancillaries. This role blends traditional publishing with digital enhancements, guided by market trends and data insights. Collaboration with authors and alignment with business goals will be key to shaping effective content strategies. Roles & Responsibilities Conduct research to identify potential content contributors, partners, and market opportunities. Develop a new author base (academic and clinical) focused on textbook-based content (print plus digital product range), while managing the existing author list to explore publishing opportunities. Manage the content proposal submission process, understand market needs, and actively commission proposals aligned with the content strategy. Collaborate cross-functionally with content, editorial, sales, marketing, and pharma teams to execute books plus digital content strategy effectively. Participate in developing a content strategy, including ancillary product components. Keep abreast of market conditions, trends, and needs through interaction with students, faculties, clinicians, industry professionals, and the sales team. Commission authors and brief them on opportunities for publishing print plus digital content. Develop a network of Key Opinion Leaders (KOLs) from various specialties. Represent Thieme Publishing at trade shows and conferences, scouting potential authors for print plus digital content. Create advisory boards to provide insights and champion product development aligned with content strategy. Supports in negotiating contracts and securing content rights, focusing on fostering collaborative partnerships. Required Background & skills: Master s degree or other scientific or clinical degrees. Candidates with UG/PG degrees in Medicine will be given preference. Minimum 7-10 years of prior experience working within the edtech or publishing industry, ideally within the STM field Strong interest in understanding user problems and market needs Proven ability to build a network Interest in digital as well as traditional education methods Experience in international collaboration is not essential but is a plus Desirable knowledge of existing digital products, available in the market(being used by students and clinicians). We offer the following benefits to our employees: Mediclaim for the self, spouse, and up to three children Accidental insurance with a sum insured of 15 lakhs

SAP Basis Consultant Application operation team is responsible for managing applications throughout their lifecycle. It is also overseeing the execution and monitoring of the operational activities and events in the IT Infrastructure. Tasks Planning of required activities to ensure the systems are in working parameters Keeping stakeholders up to date and in contact Preworks and reworks for activities like component upgrades, system refresh, release roll outs Transport management Change management & Incident management System monitoring Ensure compliance to process workflow and regulations Planning on all systems in the landscapes starting with the development system Inform Release Management and users about the downtime/activity Raise change request for SAP Basis to install the requested service packs Inform Dev team to be available for SAP modified objects Inform Test team to be available for tests SAP Basis performs the upgrade Dev team adjusts SAP standard modified objects AO checks: requested SP to be available, modified objects have been cleared, dumps, system logs, web services, clear caches, check jobs, applications to be running (TGA) etc Inform Test team to test the new functionality Tools SAP + ChaRM Change Request Management Tool (Solution Manager) ServiceNow , Microsoft Azure DevOps Hana Studio $Universe

Responsibilities: * Embedded SW development using Embedded C, RTOS, & Linux for TI MPUs and STM MCUs. * Development of CANopen, Ethernet TCP/IP, UDP/IP, UART, RS485/RS232 communication protocols * Experience with PLC programming is an advantage

About the job We are looking for a skilled Embedded Systems Engineer/ Embedded Software Engineer with hands-on experience in Raspberry Pi, Linux systems, GUI development, and microcontroller interfacing. The ideal candidate will work on designing, developing, and integrating embedded solutions for innovative products. Note: Only candidates based in Surat or willing to relocate to Surat should apply. Responsibilities Develop and maintain embedded systems applications on Raspberry Pi (using languages such as Python, C, and C++). Design and implement Linux-based solutions, including configuration and setup of operating systems (Raspberry Pi OS, Ubuntu, etc.). Design and create graphical user interfaces (GUIs) for applications running on the Raspberry Pi using GUI tools and other appropriate frameworks. Write efficient, maintainable code for the Raspberry Pi, including code for display screens (LCD, OLED, etc.), touch interfaces, or external peripherals. Interface Raspberry Pi with microcontrollers like STM32 for embedded control applications. Work with various microcontroller platforms to create embedded systems that communicate with Raspberry Pi via protocols like I2C, SPI, and UART. Preferred candidate profile Qualifications B.E./B.Tech in Electronics and Communication Engineering or a related field. Strong foundation in embedded systems, electronics, and microcontroller-based development. Hands-on experience with Raspberry Pi, Linux OS, and microcontroller interfacing (STM32, Arduino, etc.). Proficiency in programming languages such as Python, C, or C++. Familiarity with communication protocols like I2C, SPI, and UART. Good understanding of both hardware and software integration in embedded systems. Candidates based in Surat or willing to relocate to Surat are preferred.

Key Skills : EMBEDDED SYSTEMS,Firmware,C,SPI,UART,I2C What you’ll do; • SW :Embedded software development • HW:STM32 & Rpi • Testing: Driver, Application and Unit testing. • Development: Drive development interfaces: SPI,UART,I2C..

Preferred who Staying in the Bangalore Location MsgQ Technologies Services Private, Limited. Job Title: R&D Lead - Firmware Key Responsibilities: • Design, develop, and debug embedded systems and firmware for electronic products. Lead the firmware development lifecycle from requirement gathering to deployment and post release support. • Handle and guide the firmware team members on coding standards, and debugging strategies. • Conduct regular code reviews and mentor junior engineers to build technical expertise within the team. • Collaborate closely with hardware, QA, and product teams for system integration and validation. • Ensure firmware meets performance, reliability, and scalability targets. • Create technical documentation, design specifications, and unit test plans. • Evaluate microcontroller platforms and tools to suit various product requirements. • Plan and manage project timelines, resource allocation, and task prioritization. • Continuously improve processes, tools, and standards used in firmware development. • Stay updated with the latest advancements in embedded technologies and propose innovative solutions. Technical Skills Required Must-Have Skills: 1. Microcontroller Experience: Proficiency in 8/16/32-bit microcontrollers (ST, Microchip, etc.). 2. Programming Knowledge: Strong expertise in Embedded C/C++. 3. RTOS Expertise: Experience with Free RTOS and other real-time systems. 4. Peripheral Interfaces: Strong knowledge of SPI, I2C, ADC, RS232, RS485, Ethernet, USB, CAN, External Bus. 5. Driver Expertise: Experience working with LWIP or similar drivers. 6. Memory Interface: Understanding of EEPROM, external flash memory, and file systems. 7. Schematics Understanding: Ability to interpret and debug hardware schematics. 8. Communication Protocols: Hands-on with Modbus RTU, Modbus TCP/IP, Modbus ASCII. 9. Network Protocols: Knowledge of IPv4, IPv6, DHCP/DHCPv6, TCP/IP, UDP, SNMPv2, SNMPv2Traps. Preferred Additional Skills: • Experience developing and integrating graphical LCD drivers. Expertise with Linux OS and kernel-level programming. Bluetooth and Wi-Fi module integration in embedded systems. • Experience with automotive-grade real-time systems and standards. • Proficient in using debugging tools like oscilloscopes, logic analyzers, and JTAG. Work Environment Address: MsgQ Technologies Services Private, Limited. No.15, 4th Floor, Bannerghatta Rd, Sarakki Industrial Layout 3rd Phase, J P Nagar. Bangalore Karnataka - 560076. Contact us: +91 - 8088322927