8 Staad.Pro Jobs

About the job: Key responsibilities: 1. Understand and read drawings and layouts 2. Work on AutoCAD 3. Coordinate with clients for the technical specifications required 4. Create a BOQ of materials and contact vendors for the same 5. Coordinate with site engineers for the status of the work in progress 6. Report the site performance daily 7. Coordinate with the team of carpenter, plumber, electrician, etc. as per drawings provided 8. Monitor the development of the site as per drawing and report diversions if any Requirements: 1. Assure proficiency in AutoCAD, Civil 3D, STAAD or similar tools 2. Demonstrate collaborative skills to work effectively with architects, contractors, and other engineers 3. Ensure precision in design and execution 4. Apply strong analytical skills to identify issues and develop effective solutions 5. Exhibit good communication and interpersonal skills Who can apply: Only those candidates can apply who: are Civil Engineering students Salary: ₹ 2,00,000 - 3,20,000 /year Experience: 0 year(s) Deadline: 2025-06-18 23:59:59 Other perks: Informal dress code, Free snacks & beverages Skills required: AutoCAD, Autodesk Revit, 3D Modeling and STAAD.Pro About Company: The Knowledge Center is a dedicated physical space designed exclusively for the architectural and design industry. Our mission is to address the everyday challenges faced by professionals and future professionals in architecture and design. We provide streamlined solutions by offering convenient access to all material samples and catalogs in one place, enhancing efficiency and collaboration in the creative process. The Knowledge Center aims to bridge the gap between educational and professional journeys for future professionals.

About the job: Key responsibilities: 1. Working on site measurements 2. Site formalities 3. Daily work reporting and planning for clients 4. Labor management and grievance handling 5. Reporting site requisition and issues 6. Stock security and issue 7. Please note these are macro tasks, and there will be multiple micro-related tasks that will be part of the job profile, which would be understood. If the performance remains unsatisfactory, a final extension of 3 months will be granted. However, if there is no improvement during this period, we may be compelled to proceed with termination. Who can apply: Only those candidates can apply who: have minimum 1 years of experience are Civil Engineering students Salary: ₹ 2,40,000 - 3,60,000 /year Experience: 1 year(s) Deadline: 2025-06-04 23:59:59 Other perks: Informal dress code Skills required: AutoCAD, Accounting, Data Structures, Data Analytics, Statistical Modeling, MS-Excel, Statistics, Advanced Excel, STAAD.Pro, English Proficiency (Spoken), English Proficiency (Written), Engineering Drawing, Quality Assurance/Quality Control (QA/QC), Engineering Surveying, Quantity Survey (QS) and Data Analysis Other Requirements: 1. Civil engineer graduates or diplomas will be preferred. 2. Polytechnic would also be preferred. 3. People with acumen in the construction industry can apply. 4. Our company primarily works in the glass glazing and facade works (windows/doors and glass facade/partitions). Please note this is work from a respective site in MMR region. About Company: We provide end-to-end solutions in glass and aluminum product lines catering to high-volume residential or commercial projects.

The responsibilities of this position include, but are not limited to: Undertaking design and planning activities on maritime projects - container terminals, mining/bulk, oil/gas, marinas, ports and harbors, offshore wind, coastal resiliency and development schemes Independently prepare calculations, drawings, and specifications and documents, and oversee the development of technical deliverables prepared by junior structural engineers. Oversee the work of junior structural engineers. Perform quality control review of design calculations or drawings. Participate in the development of technical scope and design fee estimates in response to RFPs. Lead and coordinate marine team with other in-house and subconsultant engineering disciplines as needed. Participate in interdisciplinary review of project deliverables. Work alongside a project manager to ensure technical and business-related successes of projects. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Civil Engineers, UK) 15+ year's experienceas a Structural Engineer with a focus in ports, marine and waterfront projects Experience with computer analysis and design software such as SAP 2000, RISA 3D, STAAD.Pro, SAFE Experience with AutoCAD and Revit Excellent oral and written communication skills

Roles & Responsibilities: 1. In-charge of all activities related to Architectural, Civil & Structural and Plumbing works, to finalize design & drawings from A & E Consultant and Advise Senior to review and approve. 2. Review and comment Architectural, Civil & Structural and Plumbing drawings, Technical Specifications and data sheet, Calculation and any other documents that may required for the designing stage of project received from A & E Consultant and Advise Senior to review and approve. 3. Review and comment on to Architectural, Civil & Structural and Plumbing GFC Drawings and any other documents that may required for the project execution at site received from A & E Consultant and Advise Senior to review and approve. 4. Review of Technical offer received from Civil Contractor / Vendor along with A & E Consultant along with Technical Comparison and Advise Senior to review and approve 5. Highlight deviations, if any to Civil Manager 6. Participating Technical Meeting with Civil Contractors / Vendors along with Seniors, A & E Consultant, Procurement Assistance 7. Review of Minutes of Meeting for Civil contractor / vendor , Minutes of Meeting for Internal meeting and issue to concern. 8. Review of Final Ordering Technical Specification / Tender and BOQ for Civil Contract Prepared by A & E Consultant and Advise Senior to review and approve. 9. Participating kick of Meeting with Civil Contractors / Vendors along with Seniors, A & E Consultant, Procurement Assistance & PMC. 10. Review of DPR, Measurement Sheet and RA Bill of Civil Contractor, Vendors Invoice etc. 11. To coordinate for site requirement related to GFC drawing and client scope of Material with PMC 12. Review and Comments on Shop floor Drawing, Fabrication Drawings, Data Sheet and other documents submitted by Civil Contractor / Vendor and Advise Senior to review and approve. 13. Collection of As-Built Drawings for Architectural, Civil & Structural and Plumbing, O & M Manual and other detail from A & E consultant and PMC. 14. Get it Prepare from A & E Consultant on Compilation of daily all checklists, pre-commissioning, Testing and commissioning Procedure, Format, reports. 15. Get it Prepare from A & E Consultant on to analyse and approve the concrete mix design, shuttering / centring scheme and infrastructure works of the Civil Contractor. 16. Preparing of Standard operating procedure (SOP) for the operation and maintenance of the new facility and its equipment. 17. Compilation of various statutory authority approvals.

Job Title: Structural Design Engineer Location: Thane / Kalyan Experience: 5+ years Industry: Civil Engineering / Construction Employment Type: Full-time Job Summary: We are seeking an experienced Structural Design Engineer with expertise in designing high-rise RCC buildings. The ideal candidate will be responsible for structural analysis, design, and coordination with project teams to ensure safe, efficient, and cost-effective structural systems. Key Responsibilities: Perform structural analysis and design of high-rise RCC buildings in accordance with relevant codes (IS codes, ACI, Eurocodes, etc.). Prepare structural drawings, calculations, and reports for project approvals. Conduct load analysis, seismic analysis, and wind analysis to ensure structural stability. Work with ETABS, SAFE, STAAD.Pro, AutoCAD, and Revit for structural modeling and design. Coordinate with architects, MEP engineers, and contractors to ensure design feasibility and constructability. Ensure compliance with IS 456, IS 1893, IS 13920, IS 16700, and other relevant standards. Review and approve structural shop drawings and site queries. Conduct site visits and inspections to ensure design adherence and resolve construction challenges. Provide technical guidance and mentoring to junior engineers. Optimize structural systems for cost efficiency and sustainability. Qualifications & Skills: B.E./B.Tech or M.E./M.Tech in Civil/Structural Engineering from a reputed institute. 5+ years of experience in structural design of high-rise RCC buildings. Proficiency in ETABS, SAFE, STAAD.Pro, AutoCAD, and Revit. Strong knowledge of Indian Standards (IS codes), NBC, and other international design codes. Experience with foundation design, seismic analysis, and wind load design. Ability to handle multiple projects and work under tight deadlines. Strong communication and coordination skills.

Role & Responsibilities: Conduct training sessions on AutoCAD, Revit, Staad.Pro, ETABS, and other civil CAD software. Guide students on structural design, BIM modeling, and drafting . Develop course content, assignments, and real-world projects . Conduct workshops, industrial training, and career counseling . Stay updated with industry trends and software advancements . Maintain student records and ensure a structured learning process . Preferred Candidate Profile: Qualification: B.E./B.Tech/M.Tech in Civil Engineering . Experience: 1+ years in teaching/training or civil design. Skills: Proficiency in AutoCAD, Revit, Staad.Pro, ETABS , and other CAD tools. Communication: Strong verbal & presentation skills with a passion for teaching. Location: Pune (CADDESK Shivaji Nagar & Narhe). Perks & Benefits: Competitive salary with performance-based growth. Hands-on real-world project exposure . Opportunity to mentor future engineers . Professional development & upskilling support . Supportive work environment with career growth opportunities.

Preferred Candidate Profile: Education: Diploma/Degree in Civil Engineering, Quantity Surveying, or a related field . Experience: 0-4 years in structural design, site planning, or quantity surveying . Software Skills: Mandatory: AutoCAD, Civil 3D Preferred: STAAD.Pro, ETABS, SAP2000, Microsoft Project, Primavera Added Advantage: CAXA CAD (training provided), CostX, Buildsoft (for BOQ preparation) Strong Skills In: Structural analysis & design calculations BOQ preparation & cost estimation 2D drafting & 3D modeling Site planning & project coordination Excellent communication & problem-solving skills . Ability to work remotely but available for site visits if required . Must have a high-performance laptop with CAD & engineering software capabilities . Stable internet connection & ability to collaborate via online tools . Perks & Benefits: 100% Remote Work Work from the comfort of your home! Continuous Learning & Upskilling Training provided for CAXA CAD & Quantity Surveying tools . Diverse & Exciting Projects Work on real-world, large-scale construction projects . Competitive Salary & Performance-Based Incentives . Collaborative & Supportive Virtual Work Environment . How to Apply: Send your resume, portfolio (if available), and expected salary to raja@pcr.builders with the subject: Remote Civil Engineer Application – [Your Name] Join us and help build a stronger future!

Roles and Responsibilities Design of Industrial Structures, like RCC design & Structural Steel Design of Process Structures, Pipe Racks, Admin Buildings, Power Plant, Manufacturing facilities etc. Checking of Structural / Fabrication Drawings Desired Candidate Profile BE Civil ME / M Tech Structures Need 0 or 3 Years of Experience in Industrial Structures Design Knowledge of STAAD.Pro, AutoCAD is a must Call on : 9403191627 / 7588863670