11 Sqc Jobs

1. Testing certification 2. Process control of stainless steel wire rods rebars (Long products) 3. Able to understand, collect analyze the process control parameters by analytical tools. 4. Understand customer's technical requirements work accordingly for process requirements. 5. Working knowledge of SPC, SQC

To perform and document stage-wise inspections offabrication jobs as per approved drawings, weld maps, and project-specificquality standards, ensuring parts are accepted or escalated at the right time,supporting smooth project flow and first-time-right execution. Key Responsibilities 1. Carry out dimensional and visual inspections forassigned fabrication jobs including fit-up, welding, grinding, and painting in line with approved ITPs and drawings. 2. Verify that jobs are fully ready before inspection confirm proper welding consumables, part marking, and drawing version beforeproceeding. 3. Tag accepted, hold, and rejected items appropriately,and update shift-wise inspection logs with traceability. 4. Escalate any deviation, unclear condition, or suspectednon-conformance to the QC Lead without delay. 5. Coordinate with Section Coordinators and In-Charges toensure that jobs are only offered when ready avoid idle QC time or partialchecks. 6. Track and re-inspect reworked items, ensuring properclosure of NCRs with documentation. 7. Maintain calibration and readiness of basic inspectiontools (e.g., measuring tape, weld gauge, fillet gauge, DFT meter). 8. Assist during client or third-party inspections by presentingrelevant records and highlighting inspected jobs. 9. Report recurring rework trends or frequent jobreadiness gaps to the QC Lead for process correction. 10. Adhereto traceability and tagging discipline for all inspected parts support flow,not delay it. Qualifications Experience Diploma or B.Tech in Mechanical / Welding /Fabrication Engineering 14 years of experience in quality inspection instructural steel fabrication, infrastructure, or EPC projects Familiarity with fabrication drawings, weldsymbols, visual inspection, and DFT measurement Hands-on experience using basic inspection tools(vernier, weld gauges, DFT meter) Clear sense of documentation, traceability, andescalation logic Preferred: New plant start-up environment, Pareto, Fish Bone Diagram, Design andManufacturing FMEA, SPC, SQC, Gage RR, 8D Problem Solving, Six SigmaCertification Good communication skills for shift coordinationand audit support.

Manufacturing Process Control: Ensure manufacturing processes follow correct design drawings, tools, materials, and manpower usage as per standards. Quality Systems & Calibration: Maintain and improve company quality systems; ensure availability and calibration of testing and inspection gauges in consultation with superiors. Lean, 5S & Process Improvement: Actively participate in LEAN and 5S activities; work on reducing process cycle time, rework, scrap, rejections, and material handling damages. Design Support & ECR: Recommend engineering changes (ECR) to improve drawing specifications, process capabilities, and reduce production costs. Problem Solving & Corrective Actions: Investigate deviations, customer complaints, and failures using root cause analysis and implement effective corrective & preventive actions. New Product Development & PPAP: Prepare and submit PPAP documentation; coordinate production trials, pre-launch activities, and APQP initiatives. Process & Product Audits: Conduct process audits, maintain inspection control plans and FMEAs; determine process stability using statistical methods (SPC, Cp, Cpk, etc.). Cross-functional Coordination: Collaborate with Sales, Purchase, Engineering, Production & Maintenance to resolve quality concerns and ensure smooth operations. Documentation & Compliance: Manage controlled documents, quality procedures, work instructions, and ensure compliance with ISO 9001:2015 standards. Training, Safety & Team Management: Identify training needs, support team development, assist with 3rd party audits, and enforce safety norms including use of PPE.

Strong interpersonal and people management skills Knowledge of ISO 9001:2008 and ISO 13485:2003 standards (preferred) Proficiency in interpreting engineering drawings For further information, please call 8050011328

To head and manage Quality function across Suppliers, Processes and Customers. Will handle Quality Assurance Strategy for Supplier / Manufacturing value chain for continuous improvement of Overall Quality Metrics etc.

Basic Requirement : 1. Experience of Worsted Spinning will be preferred. 2. Education : Bachelor in Textile/Diploma in Textiles Job Purpose 1. To achieve Target Production & efficiency as per Production Plan by optimizing all available resources 2. To follow all Quality Parameters of each M/c 3. To Identify & remove abnormalities through effective check system 4. To implement & monitor Delivery Schedule as per plan 5. To maintain discipline and all Management activity in Dept. Job Context & Major Challenges 1. Resources available are suitable for small lots, achieve & maintain Zero Mix-up at every stage through faster Run out and monitoring 2. Inspite of different cuts (Clearer) for different blends & count 3. To maintain & achieve Autoconer efficiency 75% 4. Achieve zero re-working by improving skill of workmen and create awareness to all workmen regarding check points 5. To create more multi skill in Shift which helps to achieve hand shortage, production & efficiency at every stage Key Result Areas KRA (Accountabilities) Supporting Actions KRA1 Accountability - Production & Utilization of M/cs 1. Minimize spindle to spindle variation 2. Proper utilization of Man & M/c 3. Implementation & Planning KRA2 Accountability - Deilvery 1. Database Analysis 2. Follow up of Process Parameters at all stage 3. Non-confirmative production Should be Zero KRA3 Accountability - Waste Control 1. To improve working of material by better practice & system follow up 2. M/c & Shift-wise Monitoring 3. System Follow up KRA4 Accountability - M/c Wise check points 1. Effective charge system 2. Cross checking of Worker Check Points 3. Involvement in Management Activities for Team building 4. Feedback from SQC 5. Follow up of WCM Activities

Tolerance simulations of heavy commercial vehicle components using 3DCS software. The candidate would need to interact and align with the global group companies and external partners fo r development areas. Strong knowledge of Tolerance management, advanced GD T methods in the automotive industry. Good to Have: Knowledge of VW methods and documents in tolerance management Knowledge of working experience in Wind-chill, Enovia , VIS VSA German language (Read, Write, Speak) Sound knowledge of Automotive systems and Aggregates Good Hands-on experience in 3DCS, CATIA V5 Can able to Define reference points system (RPS), Create and execute 3D simulation models and Kinematic analysis Can able to do acquisition of tolerance chains, evaluation of the simulation results, suggestions for improvement, and corrective measures according to Contributors. Can able to do Iterative testing by integrating measurement data from Master data, Generate data for measurement plans Good experience in Checking the stability of planned assembly processes (Cp, Cpk, ...) Understanding of build sequence at the assembly level Good understanding of 1D and 2D stack-up Know-how of types of fixtures Can able to prepare final analysis reports Can work in CFT to support to Project team Strong knowledge of automotive Chassis, cabin, and components design. Basic knowledge of Machine Design and Material theory. Good interpersonal skills, Communication skills, presentation skills and Team player Should be able to handle assigned tasks independently Should work offline at MTB-I Pune office location Flexibility for international travel (if needed)

If you are interested please share your resume on whatsapp: 9985737772 Role & responsibilities Ensure that all incoming, in process & outgoing RMs / PM / FGs are inspected & QC approved and that identification and traceability is maintained at all stages from Material inward to FG dispatch incl PM. Ensure calibration & maintenance of lab equipments Ensure that outsourced inspection services / service providers are evaluated and approved. Perform / participate in Supplier evaluation process (On-site supplier audit) Coordinate with Production, Purchase to inform quality problems with RM/PM, processes & FGs. To preserve the test sample for defined period and dispose them later with proper documentation & records. Ensure Calibration of instruments as per defined plans. Inform the Non conformities to respective Plants & Update the NCR Module Testing of R&D & customer complaint samples. Maintain Good Housekeeping inside the laboratory Follow lab safety guideline during working. Co-ordinate with the Dispatch team for Dispatches & ensure that the Approvals are given in system To ensure that all the documents are maintained as per QMS /EMS/OSHA systems. Ensure the QMS/EHS /OSHA Management system related requirements applicable to their work are clearly understood and complied. Sampling & Testing of Raw materials, packing Material, In-process samples & the finished Goods as per the laid down specifications Preparation & standardization of solutions. Test the received samples in shifts and report the results to respective department in time frame. Carry out analysis of water sample (Utility & ETP samples). Follow lab safety guideline during working. To report requirement of consumable items, glass wares, chemicals used for testing. Responsible and accountable for the QHSSE performance of the sections / sub-sections under his / her control. Report QHSSE incidents & non-conformances & conduct Investigations & instituting corrective & preventive actions in the QC Lab Ensure Inspection / tests are conducted as per the defined norms and QHSSE guidelines & work Instructions. Conducting QHSSE inspection of QC premises & arrange corrective actions for the identified shortcomings Participate in QHSSE awareness promotional activities & emergency preparedness drills Qualification of new Vendor samples and participate in offsite / onsite vendor evaluation & report to QA. Participate & ensure staff participation in Mock Drills for ensuring emergency preparedness Ensure and conduct Inspection & Testing as per sampling procedures and quality plans & complying with all standard QHHSE norms Ensuring use of Calibrated Equipment in QC Ensure and perform Sample analysis & maintain inspection & test records (FG, Intermediates, in-process & raw material) complying with the laid down QHSSE norms Maintaining of lab apparatus with respect to cleaning, handling, preservation, storage & calibration. Ensure Maintenance of control samples as per Quality Plan

If you are interested please share your resume on whatsapp: 9985737772 Role & responsibilities Ensure that all incoming, in process & outgoing RMs / PM / FGs are inspected & QC approved and that identification and traceability is maintained at all stages from Material inward to FG dispatch incl PM. Ensure calibration & maintenance of lab equipments Ensure that outsourced inspection services / service providers are evaluated and approved. Perform / participate in Supplier evaluation process (On-site supplier audit) Coordinate with Production, Purchase to inform quality problems with RM/PM, processes & FGs. To preserve the test sample for defined period and dispose them later with proper documentation & records. Ensure Calibration of instruments as per defined plans. Inform the Non conformities to respective Plants & Update the NCR Module Testing of R&D & customer complaint samples. Maintain Good Housekeeping inside the laboratory Follow lab safety guideline during working. Co-ordinate with the Dispatch team for Dispatches & ensure that the Approvals are given in system To ensure that all the documents are maintained as per QMS /EMS/OSHA systems. Ensure the QMS/EHS /OSHA Management system related requirements applicable to their work are clearly understood and complied. Sampling & Testing of Raw materials, packing Material, In-process samples & the finished Goods as per the laid down specifications Preparation & standardization of solutions. Test the received samples in shifts and report the results to respective department in time frame. Carry out analysis of water sample (Utility & ETP samples). Follow lab safety guideline during working. To report requirement of consumable items, glass wares, chemicals used for testing. Responsible and accountable for the QHSSE performance of the sections / sub-sections under his / her control. Report QHSSE incidents & non-conformances & conduct Investigations & instituting corrective & preventive actions in the QC Lab Ensure Inspection / tests are conducted as per the defined norms and QHSSE guidelines & work Instructions. Conducting QHSSE inspection of QC premises & arrange corrective actions for the identified shortcomings Participate in QHSSE awareness promotional activities & emergency preparedness drills Qualification of new Vendor samples and participate in offsite / onsite vendor evaluation & report to QA. Participate & ensure staff participation in Mock Drills for ensuring emergency preparedness Ensure and conduct Inspection & Testing as per sampling procedures and quality plans & complying with all standard QHHSE norms Ensuring use of Calibrated Equipment in QC Ensure and perform Sample analysis & maintain inspection & test records (FG, Intermediates, in-process & raw material) complying with the laid down QHSSE norms Maintaining of lab apparatus with respect to cleaning, handling, preservation, storage & calibration. Ensure Maintenance of control samples as per Quality Plan

Role & responsibilities In Precision Engineering Close Tolerance Components & Products Manufacturing or related fields with Certification as an IATF16949 Auditor or firsthand implementation & successful accreditation of the 16949 standard is essential. Knowledge in SPC and quality tools like FMEA, PAAP is a must. Exceptional Leadership, problem solving, impart training first hand to Subordination to develop analytical skills to solve problems, a very thorough understanding of the IATF 16949 Standards to develop, implement and maintain QMS Compliances, oversee all aspects of products, process audits, inspection and testing, drive continuous improvement initiatives to enhance product quality, reduce process defects and costs significantly, lead, train and mentor the young quality teams, Set up processes to collaborate with suppliers/vendors to ensure they meet the quality requirements and standard, maintain documentation, records of Audits and Compliances with Corrective actions records and Present high quality Reports to Management and Departments as also external stake holders & Customers, highlighting key performance Indicators and time bound improvement programs that are correlated to cost & budget targets of the Division, linked to the Corporate Objective & Goals. Preferred candidate profile Inward, Line, Final Inspections & Sub-contact Inspections. Testing & Painting Total Product & Processes Quality Control. Vendor/Sub Contractors evaluation NPD Validation Design, Plan & Implementation of QMS for Certification of IATF TS16949. Conduct Management Review Meetings periodically Customer Inspections and coordination.

Quality Engineer Responsible for Auto Electrical parts & wiring harness Quality process controls & resolving quality issues, Final Product Inspection, 5S, Kaizens, PPAP documentation, In process Quality Controls, Preparation of PDI, customer visit.