Bachelor's degree in Electronics Engineering, Computer Science. Proficiency in C or C++ and Python is essential. Experience with developing applications for FreeRTOS, Linux etc is highly desirable. Experience in Embedded domain, data structures, algorithms, and software design. Experience working with hardware designers/reading schematics. Experience with ARM or other low-power SoC architectures, memory system, fabric etc. Experience with interface protocols (e.g., USB, SPI, I2C, UART, UFS), power management, system integration, Software stacks, and drivers. Proficiency in using debugging tools (e.g., JTAG debuggers, logic analyzers, oscilloscopes) to identify and resolve firmware issues.

Lead Control Systems Engineer (Combined Cycle Power / Renewable Energy Projects) Job Summary: Candidate is responsible for assigned activities within the control systems engineering discipline in a global business unit Combined Cycle Power Projects or Renewable Energy Projects. Applies broad knowledge of engineering principles and practices to project engineering in the preparation of engineering analyses. Makes decisions concerning problems within the discipline on the project. Represents the discipline on the project and with the client as directed to resolve technical questions. Work involves the preparation, interpretation or review of calculations, specifications, plans, requisitions, guides, databases, and/or systems. Reviews design documents of equipment manufacturers or subcontractors of a moderate degree of complexity and prepares comments and recommendations. Assists in the preparation of forecasts, quantity take-offs and change orders. Participates in and fosters a work environment that is based upon openness, trust, communication, teamwork, empowerment, innovation, and satisfaction. Performs assignments that will develop professional work knowledge and abilities through the application of standard engineering techniques, procedures and criteria. Exercises limited but increasing judgment in performing assigned tasks. Using prescribed methods, performs specific and limited portions of a broader assignment of an experienced engineer. Major Responsibilities: Plans, develops, coordinates and reviews engineering work within a discipline on projects of large size and complexity or assignments in support of a global business unit- Combined Cycle Power Projects or Renewable Energy Projects. Coordinates and interfaces as directed with the day-to-day technical work of licensors, contractors, subcontractors, discipline engineers, scientists, specialists, designers and drafters. Communicates complex technical issues and recommends solutions to the client and upper management. Facilitates technical discussions with third parties (client, license, contractors, subcontractors, suppliers, regulators). Prepares or oversees the preparation of discipline estimates and work plan in accordance with project scope, schedule and budget, and manages implementation and performance accordingly. Develops Engineering Procedures, design guides, specifications, instructions, philosophies and design criteria . Coordinates with client representatives as delegated to obtain approval on phases of work. Reviews and approves key engineering drawings and calculations and bid summaries. Coordinates assigned engineering work with other project groups. Mentors engineers, scientists, designers and drafters by providing appropriate on-the-job training for their professional development. Education and Experience Requirements: B Tech in Instrumentation & Control from a recognized university Minimum 20 years of industry experience. Engineering and Design experience in EPC and FEED Projects of Combined Cycle Power Projects or Renewable Energy Projects Lead at least 4-5 nos. of EPC Projects with minimum direct reports of 8-15 nos. Required Knowledge, Skills, and Abilities: Candidate has the technical knowledge of engineering systems, engineering calculations, applications of engineering methods and construction methods and materials, and application of computer tools to engineering problems. Has knowledge of and works with project controls within discipline. Good knowledge of major industry or regulatory standards and design criteria pertinent to the Control Systems discipline. Professional Engineer (PE) or Chartered Engineer (Ceng) Certification is preferred. Basic technical knowledge of Control System engineering in Combined Cycle Power Projects or Renewable Energy Projects. Thorough knowledge of discipline engineering techniques, the design of engineered systems, and engineering and design calculations. Understanding of industry regulatory codes and standards and design criteria pertinent to the particular engineering discipline. Broad knowledge of the application of engineering to plant constructability as applied to construction methods and materials. Understands the standard engineering work planning, scheduling and cost estimating. Job knowledge of various types of field Instrumentation, DCS, PLC, Hazardous areas is essential. Design experience or Basic knowledge of DCS / PLC and SCADA Networks, Fiber optic and CAT 6 is essential. Basic awareness industry standards Application Programs such as SPI, S3D, Flowell, Instroke, Conval . Basic awareness of industry or regulatory standards and design criteria pertinent to the particular engineering discipline in Power Industry Basic skills in oral and written communication.

Support USB controllers for Infineon customers. Support controller firmware and hardware for various USB device classes. Develop and debug USB SuperSpeed and device controller firmware for various USB device classes, as we'll as Embedded Firmware using Cortex family processors. Work with USB drivers and Host app and understand how image sensors and Video former work. Firmware development using C/C++ on ARM microcontrollers (Bare metal and RTOS-based). strong knowledge of USB communication and debug USB protocol. Debugging technical issues on embedded hardware, firmware, and software, reporting product defects, and providing workarounds. Your Profile 1 year of experience in embedded firmware development using C language 1 year of experience developing firmware for USB controllers. Bachelors or masters in electronics engineering or embedded systems Design experience working with hardware engineers. Strong understanding of hardware and circuit design, device internals, and end applications Ability to debug technical issues on embedded hardware, firmware, and software. Design & implement embedded libraries to access peripheral interfaces such as I2S, SPI, UART, I2C, etc Ability to conduct investigative research to identify and resolve technical issues Interest and ability to learn new technologies very quickly. Ability to collaborate collaboratively and contribute guidance with your expertise

We are seeking an accomplished and visionary Technology Lead - Embedded Systems to lead the design, development, and deployment of world-class embedded system solutions. The ideal candidate will combine technical expertise with strong leadership capabilities and a commitment to excellence in product innovation. Key Responsibilities: 1. Product Development Expertise: Design and deliver high-quality embedded systems that meet global standards. Proficient in analog and digital circuit hardware design. Architect, design, and review robust firmware solutions. Ensure adherence to stringent quality processes throughout the product lifecycle. 2. Leadership and Team Management: Lead and mentor engineering teams across Hardware (HW), Firmware (FW), and Quality Assurance (QA) domains. Develop and execute a technical roadmap aligned with organizational objectives. Foster a collaborative and innovative team environment. 3. Process-Driven Execution: Implement robust processes and maintain comprehensive documentation to ensure systematic project delivery. Develop and manage project timelines, resources, and budgets to meet business goals. 4. Cross-Functional Collaboration: Collaborate with cross-disciplinary teams to ensure successful project outcomes. Uphold industry standards and best practices across all development phases. 5. Certification and Compliance: Lead efforts to secure industry-specific certifications (eg, CE, ROHS, ATEX, IECEX). Ensure compliance with all relevant regulatory and quality standards. 6. Technical Problem-Solving: Diagnose and resolve complex technical challenges during design and development phases. Drive optimization of system performance and ensure reliability. Qualifications and Experience: bachelors degree in Electronics, Electrical Engineering, Computer Engineering, or a related field; a masters degree is preferred. A minimum of 10-15 years of hands-on experience in embedded systems development, with a proven record of leading successful projects. Demonstrated leadership experience, including managing and mentoring technical teams and fostering a culture of collaboration. Advanced proficiency in programming languages such as C, C++, and assembly, with a deep understanding of software-hardware integration. Expertise in digital and analog circuit design, microcontroller architectures, and embedded hardware platforms. Comprehensive knowledge of communication protocols (eg, SPI, I2C, UART), real-time operating systems (RTOS), and hardware/software integration. Strong analytical and problem-solving skills with experience in troubleshooting and optimizing complex systems. Familiarity with industry-specific certifications and compliance standards. Excellent interpersonal and communication skills, with the ability to engage effectively with stakeholders at all organizational levels. A passion for innovation, continuous learning, and staying ahead of industry trends. Why Join Us? At Infinite Uptime, you will have the opportunity to work on cutting-edge technologies, lead high-performing teams, and make a tangible impact in the industrial diagnostics space. If you are a driven and innovative professional looking to elevate your career, we encourage you to apply.

C programming skills for embedded systems. Experience with Linux device driver development (SPI, I2C, UART, DMA, etc.). Good understanding of BSP, SDKs, and cross-compilation for embedded platforms. Familiarity with Linux kernel internals and basic debugging tools. Experience working with Device Tree (.dti/.dtsi) files. Understanding of bootloaders (U-Boot, GRUB, etc.). Experience with shell scripting and command-line tools in Linux. Strong debugging skills using JTAG, GDB, dmesg, and other debugging tools. Experience with Petalinux or Yocto is a plus. Familiarity with SPI, I2C, eMMC, and other peripherals.

Engineering degree (BE ECE/ CS) or equivalent. Hands on Experience in device drivers development in Linux, RT Linux Hands on Experience in VxWorks Hands on Experience in Embedded C Programming Hands on Experience in Communication protocols like SPI, RS232, I2C etc., Experience in Testing and debugging the sub-system and Board level.

Job Purpose "This position is open with Bajaj Finance ltd." Duties and Responsibilities Duties and Responsibilities: Must have strong SQL skills. Provide insights on customer conversion journeys- Create waterfall to track drop-offs at every stage of credit card journey. Responsible to create campaign segments using SQL to support digital marketing campaigns Collaborate with channel owners to understand requirement and come up with solutions to their requirements using data. Track & evaluate performance of digital campaigns with insights and recommendations. Will be responsible to develop all new MIS and automated the same using store procedures. Create and develop automated MIS using SSIS and SSRS package. Good understanding of Credit Card life cycle and digital channels. Work closely with marketing and other stake holders to drive Credit Card campaigns Analyze data and create insightful Reports to help team track and optimize digital campaigns. Knowledge of Credit Card Pre-Acquisition Journey Have great presentation skills to articulate analytic findings to Senior Management Required Qualifications and Experience Required Qualifications and Experience: Graduate from a reputed institute with a minimum of 1-3 years of experience in data analysis using SQL and SAS Understanding of large and complex data sets. Must have knowledge of Credit cards/EMI Card Should have good communication and presentation skills

Embedded BSP About The Role : : We are seeking highly motivated and creative visionaries who have a passion for connecting people to their cars. If you are looking to be in the driver's seat of innovation, this is the place to be. To design and develop, Embedded Software for IOT devices with latest features like Fleet Tracking, Insurance applications, Safety Camera etc. Responsibilities : Develop/Integrate embeddedLinuxdevice drivers, and proprietary modules. CustomizeBSP, boot code and device drivers for embeddedLinuxplatform and QNX on ARM processors like NXP, Qualcomm and Quectel Lead board bring up activities for new platforms and provide feedback on board layouts during design phase. Setup yocto based build environment for delivery of kernel, rfs and boot images. Identify the technical dependencies & risks early in the stage to aid proper planning. Requirements : Bachelor's degree in Electronics or Computer Engineering (advanced degree preferred). Minimum 3+ years of Industry experience with automotive domain (preferred). Experience in one or more of the following areas:Board Support Package, Operating Systems, RTOS, Bootloader, Power Management,Linux, MCU (Microcontroller). Experience in hardware bring up using interfaces like ADC, PWM, GPIO, SPI, I2C, etc. Working Experience on ARM processor Architecture. Hands-on experience inBSP, bring-up and troubleshooting of embeddedLinuxplatforms. Strong knowledge ofLinuxdriver programming, kernel architecture and u-boot architecture.

Job Summary: Bechtel India Office is currently seeking Control Systems Designer for Large Energy, Oil, Gas & Chemicals, Renewable Energy, Semiconductor manufacturing and Mining & Metal projects. The ideal candidate, in addition to meeting all the Essential Job Duties and Job Knowledge need to be a self-starter and possess strong oral and written communication skills. Job Dimensions: A. Supervision Received Receives supervision from the Engineering Group Supervisor or Senior Engineer. Performs works independently with instructions as to the general results expected B. Supervision Exercised To provide technical guidance and support to team of designers, performs checking of their deliverables on the project. Major Responsibilities: Development of 3D Model in S3D and extraction of Instrument, RIO Cabinets and Junction Box Location Plan drawings in Smart Sketch Preparation of Instrument Wiring Drawing and Loop Drawings using SPI Wiring and Loop Generation Modules Development of Cable Block Diagrams, Cable Schedule, Cable Routing & Tray Route Layout, JB Termination Drawing, Control & network patch panels drawings. Preparation of Fire & Gas Layout Drawings. Develop Instrument Hook Up Drawings using MicroStation and AutoCAD and generation of Hook Up Sketches using SPI. Preparation of Tray / Trench Layouts & Cable Routing Index and MCT Layouts. Liable for 30%, 50% and 90% Model Reviews and resolution of tags with Client, Sub-Contractors and Vendors. Perform Clash Checks in 3D Model and synchronize with other disciplines and other stake holder(s) to develop a clash free system design. Support I&C commodities in Modularized Design Preparation of Control Room and Electrical Substation Layout Drawings Preparation of MTO and development of Material Requisition of Instrumentation for Cables, Conduits, Instrumentation Bulks. Locate and optimization of Fan Out Cable Lengths of Remote I/O Cabinets, Loading of JB and RIO Cabinets, estimation of Fan out cable and Home Run Cable Length for FEED estimates. Education and Experience Requirements: 3-year diploma in Electronics & Telecommunications, Electronics & Instrumentation or Instrumentation & Control Systems from an accredited college or university. Minimum 15 years of experience in the similar industry. EED and EPC Execution experience of Large Energy, Oil, Gas & Chemicals, Renewable Energy, Semiconductor manufacturing and Mining & Metal projects. Required Knowledge and Skills : Highly proficient in S3D, SPI, SPR, Revit modeling, Navisworks, PDS, AutoCAD, MicroStation and Bluebeam Thorough knowledge in P&IDs, Cable Schedule, IO List and Network Architecture. Fire & Gas Layout and interpretation of NFPA 72 Remote I/O Design of major DCS Vendors. Skillfulness in reading, interpreting, and using related documents and drawings prepared by other project groups. Knowledge of the application of engineering and construction materials related to designs.

Successfully developing, & implementing Modbus, STM32, SPI, I2C, RS232/485, CAN, UART in products. Design and implement software of embedded devices and systems from requirements to production and commercial deployment. Required Candidate profile Thorough knowledge of active and passive components, Microcontroller, Power electronics parts. Deep knowledge and product development experience on Embedded.

Terminus circuits is looking for Member Technical Staff SerDes Design and Verification to join our dynamic team and embark on a rewarding career journey. you will play a crucial role in providing technical support, troubleshooting issues, and ensuring the smooth operation of our systems, equipment, or software. Your problem-solving abilities, technical expertise, and strong communication skills will contribute to maintaining the efficiency and functionality of our technical infrastructure. Responsibilities : Technical Support : Provide prompt and effective technical assistance to internal teams, clients, or end-users. Diagnose and resolve technical issues related to systems, equipment, software, or applications. Troubleshooting : Investigate and identify the root causes of technical problems and disruptions. Implement appropriate solutions or workarounds to resolve issues quickly. Maintenance and Upgrades : Perform routine maintenance tasks, updates, and upgrades on systems, equipment, or software. Ensure that all components are up to date and functioning optimally. Documentation : Maintain accurate records of technical issues, solutions, and procedures in knowledge databases or documentation systems. System Monitoring : Monitor the performance, availability, and security of systems and networks. Proactively identify potential issues and implement preventive measures. User Training : Provide training and guidance to users on technical tools, software, or applications. Create user manuals or guides to facilitate understanding and efficient usage. Collaboration : Collaborate with cross-functional teams to resolve complex technical challenges. Communicate effectively with technical and non-technical stakeholders. Vendor Coordination : Coordinate with external vendors or service providers for technical support, repairs, or installations. Data Backup and Recovery : Implement and manage data backup and recovery solutions to ensure data integrity and availability.

Terminus circuits is looking for Senior Member Technical Staff SerDes Design and Verification to join our dynamic team and embark on a rewarding career journey. The successful candidate will be responsible for designing and executing verification plans for complex digital designs, ensuring that the designs meet the required functional and performance specifications. The ideal candidate should have experience in designing and verifying digital circuits, and strong expertise in verification methodologies, simulation tools, and hardware description languages. Develop verification plans and test benches for complex digital designs. Execute verification plans, including test case development, simulation, debug, and coverage analysis. Strong expertise in verification methodologies, simulation tools, and hardware description languages such as Verilog and SystemVerilog. Experience with industry-standard simulation and verification tools, such as Cadence Incisive, Synopsys VCS, or Mentor Graphics Questa. Familiarity with scripting languages such as Perl, Python, or Tcl.

Software Skills : C, Embedded C, Embedded software experience with the 16/32 bit micro controllers like STM32 and SOCs like ITE or any other. Familiar with IDEs : Visual Studio Code. Experience in RTOSs : FreeRTOS, Zephyr. Experience in Embedded Linux. A rchitectures : 8051, ARM, AVR, Panasonic, Renesas Communication : USB, Ethernet, BLE, CAN, I2C, SPI, UART Product preferences : Washing Machine, Microwave Oven, Air conditioners Working experience in CMSIS supported platforms is added advantage. Hardware Debugging Expertise using Emulator, CAN Analyzer, Ethernet, JTAG, Oscilloscope etc.

The Senior firmware Engineer will develop new embedded applications by designing, developing, testing, and releasing the firmware solutions. The candidate must be able to work across multiple stages of R&D projects and manage multiple competing priorities at the same time. Roles and Responsibility: Embedded Software design for the companys suite of process instruments Analyze requirements and provide creative software solutions and designs to meet these requirements Design and develop application on Linux and/or RTOS platforms Design and develop drivers for Linux and/or RTOS platforms Participate in software and hardware design reviews Generate design documentation and test plans Provide legacy product software support and software updates as necessary Contribute to process improvement initiatives as required. Preferred Skills: Expert knowledge of C/C++ and Object-oriented programming Strong knowledge of Linux and experience in Linux Application development Proficient in develping firmware on bare metal systems as well as with real-time operating systems from Free RTOS to Linux (using Yocto build system). Capable of provisioning an RTOS from scratch Familiarity with TCP/IP communications and basic network systems Familiarity with high-level communication protocols such as MODBUS, HART. CANOpen a plus. Experience with low-level communication protocols such as SPI, I2C, CAN, UART Familiarity and experience with hardware device drivers such as A/Ds, D/As and other IC peripherals are desirable. ARM micro controller experience, especially ST Microelectronics Experience with debugging/diagnostic techniques and tools Must have a working knowledge of electronics and work closely with the hardware engineers from concept to HW/SW AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit www.ametek.com for more information.

As a customer Application Engineer, you will Engage with customers to understand their technical requirements and provide expert guidance on the selection, implementation, resolve complex technical challenges and provide timely resolutions. In your new role you will: Lead, mentor, and develop a team of Customer Application Engineers to deliver high-quality technical support and guidance to customers. Engage with customers to understand their technical requirements and provide expert guidance on the selection, implementation, resolve complex technical challenges and provide timely resolutions. Define and implement strategic initiatives to optimize the teams performance and enhance customer satisfaction. Support customers with product integration, testing, and troubleshooting to ensure successful implementation. Collaborate with internal engineering teams to address customer-specific technical challenges and provide customized solutions. Act as a technical liaison between customers and internal engineering, marketing, and sales teams. Provide feedback to internal teams based on customer interactions to drive product improvement and innovation. Contribute to the creation of technical documentation for customers. Stay updated on industry trends, market requirements, and competitive landscape to provide valuable insights to internal teams. You are best equipped for this task if you have: 5+ years of experience in semiconductor industry/ application Engineering or Embedded domain with bachelor s or master s degree in ECE/EEE, or related field with a focus on embedded systems and firmware development. Strong fundamentals and hands on experience in programming using C/C++, embedded system concepts and software build process. Knowledge of working with RTOS is a plus. Good understanding of microcontroller/microprocessor architectures (ARM, 32-bit)**. Familiarity with microcontroller peripherals like ADC/PWM/Timers/Interrupt handlings etc. Experience in developing/troubleshooting low-level drivers and hardware integration for interfaces like SPI, I2C, UART, CAN, USB, etc. Basic knowledge and understanding of analog circuit design, sensing circuits, understanding of schematics, PCB Layout and circuit simulation. Working experience in contributing to all stages of product development lifecycle is added advantage. Experience in firmware development for interfaces like display, touch screen, SDIO, Ethernet/ EtherCAT, WIFI, BT/BLE, is added advantage. Should be able to work with standard lab equipment for testing & debugging. Self-driven and motivated to work and own complex technical tasks. Strong problem-solving skills and the ability to analyze complex system behavior to optimize firmware and hardware performance. Excellent communication, presentation, and interpersonal skills, with the ability to engage effectively with customers, internal teams, and senior management. Customer-focused mindset with a passion for solving technical challenges and driving customer success Contact: Jyoti.Vimal@infineon.com Driving decarbonization and digitalization. Together. Infineon designs, develops, manufactures, and markets a broad range of semiconductors and semiconductor-based solutions, focusing on key markets in the automotive, industrial, and consumer sectors. Its products range from standard components to special components for digital, analog, and mixed-signal applications to customer-specific solutions together with the appropriate software. We are on a journey to create the best Infineon for everyone. This means we embrace diversity and inclusion and welcome everyone for who they are. At Infineon, we offer a working environment characterized by trust, openness, respect and tolerance and are committed to give all applicants and employees equal opportunities. We base our recruiting decisions on the applicant s experience and skills. Please let your recruiter know if they need to pay special attention to something in order to enable your participation in the interview process. Click here for more information about Diversity & Inclusion at Infineon.

Job Description In your new role you will: AUTOSAR and ISO26262 based microcontroller device driver development andvalidation for various peripherals [SPI, I2C, CAN, ADC, Flash, EEPROM,Timers, PWM] of Infineon s automotive microcontrollers. 1. Participateand contribute to requirements elicitation and definition phase of theproject Perform Static checks (Cyclomatic complexity, MISRA evaluation, Polyspace warnings analysis) and Unit Tests. Application/UI development in Eclipse environment Author architecture, design, test specifications and customerdocuments Participate in software requirements analysis and ambiguityresolution Provide technical solutions to customer change requests Conceive and develop validation infrastructure for topics in ownresponsibility Liaise with Application engineers on a need basis Your Profile You are best equipped for this task if you have: Embedded system software development/validation in C, assemblylanguages & SDLC Good knowledge of computer architecture (16/32bit), real-time systems Acquaintance with development tool-chains such as GCC, IAR, KEIL,Tasking etc Good working knowledge of debuggers such as Lauterbach, PLS etc Proven ability to work with standard lab equipment - oscilloscopes,logic analyzers, power benches, bus analyzers etc Good team player in a multi-site work environment Eclipse based tools and Python/Perl scripting is an added advantage Proven ability to work with standard lab equipments - oscilloscopes,logic analyzers, power benches etc Experience in standards such as AUTOSAR, IEC61508, ISO26262 isdesirable Contact: Gowri Shenoy Gowri.Shenoy@infineon.com, LinkedIn #WeAreIn for driving decarbonization and digitalization. As a global leader in semiconductor solutions in power systems and IoT, Infineon enables game-changing solutions for green and efficient energy, clean and safe mobility, as well as smart and secure IoT. Together, we drive innovation and customer success, while caring for our people and empowering them to reach ambitious goals. Be a part of making life easier, safer and greener. Are you in? We are on a journey to create the best Infineon for everyone. This means we embrace diversity and inclusion and welcome everyone for who they are. At Infineon, we offer a working environment characterized by trust, openness, respect and tolerance and are committed to give all applicants and employees equal opportunities. We base our recruiting decisions on the applicant s experience and skills. Please let your recruiter know if they need to pay special attention to something in ord

Job Description In your new role you will: Do software Validation of device drivers (Eg : FLS, FEE, FLSLDR, MCU,SPI, I2C, CAN, LIN, Ethernet, MEM, Timers, ADC, and PWM etc.) and safetysoftware in an independent/RTOS environment on Infineon s automotivemicrocontrollers Implement, institutionalize and maintain the verification andvalidation methods and infrastructure (e.g. automation to improvequality and efficiency in terms of cost and time ) Drive innovation in the form of new advancements (test methods/tools,test automation, test infrastructure) in the team Your Profile You are best equipped for this task if you have: Experience in AUTOSAR MCAL and exposure to ISO26262 [Expertise in otherdomains with embedded background more than welcome] Embedded system software development or Validation using C, assemblylanguages. Experience in the usage of LabView, NI FPGA, oscilloscopes, logicanalysers, power benches etc. Experience in embedded system development tools such as compilers,debuggers, static analysers etc. Working experience in scripting languages such as Perl, python, C#etc. Experience in the development/maintenance of the test automation andcontinuous integration frameworks Good knowledge of computer architecture (16/32bit), real-time systemS Ability and willingness to work with multi-disciplinary teams. Contact: Gowri Shenoy Gowri.Shenoy@infineon,com, LinkedIn #WeAreIn for driving decarbonization and digitalization. As a global leader in semiconductor solutions in power systems and IoT, Infineon enables game-changing solutions for green and efficient energy, clean and safe mobility, as well as smart and secure IoT. Together, we drive innovation and customer success, while caring for our people and empowering them to reach ambitious goals. Be a part of making life easier, safer and greener. Are you in? We are on a journey to create the best Infineon for everyone. This means we embrace diversity and inclusion and welcome everyone for who they are. At Infineon, we offer a working environment characterized by trust, openness, respect and tolerance and are committed to give all applicants and employees equal opportunities. We base our recruiting decisions on the applicant s experience and skills. Please let your recruiter know if they need to pay special attention to something in ord

Job Function: Perform Firmware / Mobile validation activities like Test Setup, Test Development, Execution & Test artifacts generation and contribute to smooth execution of all test Projects of Kitchen and Bath Automation Products. Work with Firmware Development team / Mobile app team during development and testing. Participate in support product development and organization initiatives. Organize and execute test activities by using formal test methodology. Representative Duties:. Responsible for test activities for firmware testing/ Mobile app testing for Kitchen and Bath Ensure the right tools, technologies and platforms are chosen for the testing. Improve test execution by using the right tools and technologies. Good understanding of automation test framework Help accosiates to establish guidelines and best practices in the group to ensure an effective test development process and well tested products proactively ensure the requirements are complete and testable. Help accosiates to prepare testbed setup, test management practices and implement methods for repeatability with minimum maintenance. Provide support to test lead in test activities like defining test strategy, creating test plan, planning test schedule for test development and regression test, developing test designs. Responsible in robust quality delivery. Responsible for supporting Automation lead in Scripting and know-how of Python programming language. Experience in schematic understanding. fair knowledge of wired / wireless protocols. Technical skills Required: Minimum 3-5 years of experience with Embedded Software Testing mainly product-based end to end testing experience required. Minimum 2 years of Python programming experience with testing background Good understanding of Performance testing. Experience in testing different communication protocols such as Wireless / Wired (MQTT, BLE, Ethernet, RS 232, SPI, I2C) Basic understanding of Azure/ AWS cloud. Experience in any home automation / smart energy / IOT/ or any electronics-based industry. Hands on experience in test case design and various functional and non-functional testing types Well versed in using hardware and software tools for test development Proficient with test configuration management, test artefact version control processes and testing tools. Thorough understanding of software development lifecycle and familiarity with CMMi model Experience with creating Requirements Traceability Matrix, Process Documents, Test Plans Other required skills: Proficient with MS Office Tools (i.e., Word, Excel, PowerPoint, Access, Outlook) Excellent verbal and written communication skills Experience in working with internal and external partners Bachelors degree in Electronics or Electronics & Instrumentation or Computer Engineering (similar or higher) ISTQB Foundation level (or equivalent) certification Desirable.

The Senior firmware Engineer will develop new embedded applications by designing, developing, testing, and releasing the firmware solutions. The candidate must be able to work across multiple stages of R&D projects and manage multiple competing priorities at the same time. Roles and Responsibility: Embedded Software design for the companys suite of process instruments Analyze requirements and provide creative software solutions and designs to meet these requirements Design and develop application on Linux and/or RTOS platforms Design and develop drivers for Linux and/or RTOS platforms Participate in software and hardware design reviews Generate design documentation and test plans Provide legacy product software support and software updates as necessary Contribute to process improvement initiatives as required. Preferred Skills: Expert knowledge of C/C++ and Object-oriented programming Strong knowledge of Linux and experience in Linux Application development Proficient in develping firmware on bare metal systems as well as with real-time operating systems from Free RTOS to Linux (using Yocto build system). Capable of provisioning an RTOS from scratch Familiarity with TCP/IP communications and basic network systems Familiarity with high-level communication protocols such as MODBUS, HART. CANOpen a plus. Experience with low-level communication protocols such as SPI, I2C, CAN, UART Familiarity and experience with hardware device drivers such as A/Ds, D/As and other IC peripherals are desirable. ARM micro controller experience, especially ST Microelectronics Experience with debugging/diagnostic techniques and tools Must have a working knowledge of electronics and work closely with the hardware engineers from concept to HW/SW

Seeking a Senior Test & Automation Engineer for IoT telematics QA. Must have expertise in automation, scripting, and embedded testing for telematics solutions.

Design, development & testing of high-speed digital & mixed signal designs having FPGAs & microcontroller Component selection Schematic development Board Assembly Instructions Board Bring up & complete interface testing Debugging Required Candidate profile 2+ years of exp as Deign Engineer Hardware Should've used Altium, Cadence, USB, PCIe Gen 1.0, 1G Ethernet, I2C, SPI, UART. BE-Electrical and Electronics Preferably from Manufacturing companies

Required Experience: 5+ years of experience in Embedded Systems Education with Specialization : B.E./ B.TECH [ EEE ECE E&I Roles and Responsibilities we offer - Understanding the Requirement/Ideas/Issues and proposing design solutions - Implementing and executing the solution in compliance to the SDLC process, codes & standards - Maintain and Manage SW and related Development tools and Equipment's Required Technical Skill Set - Proficiency in C is must. C++ is value added - 32-bit Processor/Controller knowledge is essential (CortexM3/M4 is a plus) - Good knowledge in HW and communication protocols (I2C/SPI/UART/USB) - Good knowledge in TCP/IP and MODBUS - Good knowledge in Displays and Sensors is added advantage - Familarity in understanding Electrical & PCB circuits and schematic drawings - Excellent Trouble Shooting and Debugging skills Required Tools Software Knowledge - Proficiency in Embedded C programming - Working Knowledge in IDEs like GHS MULTI/IAR EW for ARM/KEIL MDK or similar - Working knowledge in Debug & Downloading Tools such as JTAG/ISP etc. - Familiarity in performing static analysis check and Unit test for SW modules using any SQM tools - Agile Tools & Practices - Version Control knowledge on any tools such as Clearcase/GIT/SVN Soft skills: - Good oral and written communication skills in English. - Self-driven, self motivated and hard working - Highly focused towards work and achieving goals Skills : - C, C++,Hardware , communication protocols(I2C/SPI/UART/USB),32-bit Processor/Controller knowledge is essential (CortexM3/M4

C++,ADAS,Automotive, ADAS Domain,Embedded development. C++ development, ADAS Feature development. Sensor or Tracking Experince. Advanced C++ concepts and best practices for ADAS feature development Coding techniques for ADAS features, such as sensor fusion, object detection, and machine learning Git version control system for collaboration and code management Bazel build tool for large-scale ADAS projects Gtest framework for writing unit tests and ensuring code quality

Engineer/Sr Engineer (Firmware/SW Driver development and Automation, System Validation) General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. Job Description: - Develop complex drivers/Firmware for the critical SOC Ips - Develop system level test content to validate the driver/firmware for the system overall testing. - Understand overall SoC and IP Architecture . - Work with IP Design/Verification teams to understand the functionality and programming sequences. - Develop/port/enhance the software content and bring up. - Automation of Test content Job Requirements : - ~ 4 years Software Engineering experience or related work experience. - Excellent understanding of Embedded systems, Soc Architecture, Processor Architecture and Memory interfacing. - Excellent C/C++ expertise and hands-on experience on Firmware development/debug - Hands on experience on Python - Experience in DDR and other High speed protocols is added advantage. - Exposure to working on emulation/pre-si environment. - Using JTAG based debuggers , compilers/linkers

General Summary: Design, develop, unit test and documentation of the device driver for ARM SoC. Bring up the driver and unit test the driver features in the new ARM SOC. Optimize the driver for maximum performance. Bug analysis/fixing of the issues during product verification stage and customer reported issues. Skills/Experience: 0-1yr experience Strong programming skills in C and Linux experience. Device driver or board support package (BSP) knowledge or development experience. Knowledge in developing the device drivers and bootloaders. Knowledge for ARM/DSP Processor Architecture, JTAG, Emulators. Knowledge in development of RDK-B ,Yocto build framework, QSDK framework and/or PRPL OS development and/or experience in Opensync is added advantage. Excellent communication skills. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field. BE/BTech/MTech in Computer Science or in Electronics preferred with proven success in a challenging academic program. You may e-mail or call Qualcomm's toll-free number found .