1569 Spi Jobs - Page 21

3 years of experience Pre/Post Silicon Validation: Develop and deploy embedded diagnostic software for custom SOCs. Hands-on experience with FPGA, chip bring-up, etc. Expertise in working with and programming different chip peripherals. Hardware bring-up on SoCs, prototyping and emulation systems, Bare Board Bring Up Experience with the development of real-time embedded systems, microcontrollers, FPGAs, and ARM processors Substantial and proven C programming knowledge, CMSIS/Assembly Programming Strong background in highly resource-constrained, real-time, embedded environments Experience some of the popular MCU, e.g., ARM Cortex (M0, M55, A53), RISC-V Experience with various peripherals such as PCIe, USB, SDIO, SPI, I2C, I2S, GPIO, etc. Excellent debugging skills, including proficiency with oscilloscopes, logic analyzers, spectrum analyzers Experience in the use of modern software development tools,

You should be strong in C/C++ programming and possess a solid understanding of object-oriented design principles along with knowledge of good programming practices. Additionally, you should have experience in designing Firmware for Micro-controller based Systems and be familiar with communication protocols such as SPI, I2C, MODBUS, Device Drivers, and ADC. Experience with Zigbee, GSM, GPRS, USB, Ethernet, and boot loader is preferred. Ideally, you should have 0-4 years of experience in the field and hold a degree in BE/B-Tech Electronics/Electronics and Telecommunication or MSc Electronics/Instrumentation. To apply for this position, please send your resume to careers@accel-systems.co.in. In your email application, make sure to mention the following: 1. The post you are applying for in the subject line and the email body. 2. Provide reasons why we should hire you, highlighting your relevant skills and experience.,

Position: Senior Embedded Engineer (CE712F RM 3057) Mode : Work From Office Must have : FreeRTOS, MCU, Embedded C Good to have : JIRA/Confluence, Git What you will do In this role, you will be part of product development team to manage & deliver new product functionalities, modify existing products functionalities or improve product functionalities as required. The Embedded Firmware Technical Lead will provide general supervision and technical guidance to the Embedded firmware development team in the design, development and test of programs in Fire detection systems. You will work within a multi-disciplined engineering team consisting of electronics engineers, mechanical engineers, firmware engineers, software engineers, programmers and scientists focusing on applied research and new technology innovations to provide new and improved products and solutions for our customers. How you will do it Architect and own the embedded firmware for fire detection system Design, Code & Test for embedded systems product and own the Plan, track and manage entire product development lifecycle working closely with Engineering manager Provide support to field engineers and internal stakeholders Guide and mentor junior members of the team for skill upgradation Maintain and support released NPIs in sustenance mode Identify & record metrics for product development and sustenance activities Liaise with other departments including Program management, Product Support, Technical Authors & SQA Prepare software design specifications, test plans, protocol specifications & feasibility study. Participate in project planning, effort estimation, Analysis, coding & unit testing. Lead team of firmware developers Create, update and support in form of review for different product documentation across different phases of development lifecycle like requirements, test plans etc. Participate in assisting Compliance, Approvals, factory testing with any necessary support Participate in product development meetings, design reviews and code reviews Prepare the documentation as per ISO QMS guidelines & Participate in Quality Management System reviews Makes recommendations for changes to firmware development guidelines & standards. Develop methods, metrics, techniques & evaluation criteria for algorithms, products, processes. Define guidelines for implementation of clean, well-structured code with proper abstraction and reusability Comply with and make recommendations for changes to established development guidelines and standards. Develop an in-depth understanding of the development realm through interaction with other groups, communication with external experts and suppliers and independent research. Work for estimation, design, analysis, coding and unit testing What we look for 9-12 years of hands-on experience on Embedded C, Microcontroller Driver development and RTOS. Good to have knowledge of C++ application development, Embedded Linux platform, middleware & application, IOT, Wireless protocols MQTT, ZigBee, LoRa Experience in team handling, scheduling and project planning Good exposure to Embedded bus protocols I2C, SPI, UART. Strong in analog and digital hardware and interfacing peripherals, microcontrollers. Good at Firmware design, architecture for complex product development Good experience working on NPIs and sustenance projects with good hold on the process front Experience on firmware development on Renesas, Microchip, ST microcontrollers and its tools is preferred. Should have good hands-on with Github, JIRA or any similar tools for version/source control Knowledge of Embedded firmware design and development practice; programming techniques and systems and language platforms. Good debugging skills with debuggers ICE, GDB, JTAG, chip programmer and should be a good mentor/guide to team Team leader experience on Estimation, Risks, planning and task allocation and tracking is must. Usage of tools like MPP, JIRA, confluence etc is preferred Good team leader experience working with at least 3-4 members team, data-driven approach to leadership. Self-motivated and a good team player, should be able to work independently with minimal supervision from Engineering Managers Specialized Skills: Strong communication, interpersonal, problem solving and presentation skills Thorough knowledge of the firmware development area Able to work independently or in a team environment Able to take ownership and work on project timelines Self-motivated, takes initiative to resolve issues Ability to problem solve through analysis of a situation where there are a variety of variables Strong business acumen, coaching and mentoring skills Strong proven leadership capabilities Knowledge of Six Sigma Methodologies or equivalent Knowledge of Fire Detection Systems or similar systems Demonstrated ability to engage and motivate a highly skilled technical team Preferred BE (ECE/EIE/ETC/EE) Degree in a technical field is required 9+ years of experience on embedded firmware development ****************************************************************************************************************************************** Job Category: Embedded HW_SW Job Type: Full Time Job Location: Pune Experience: 7-12 Years Notice period: 0-15 days,

SPI ADMIN 5 and above years of experience, hands-on exp on SPI. Preferred Eng graduates. Diploma will be ok Key Responsibilities Database Management : Create, configure, and maintain SPI project databases; manage data merging, backups, and archival. User & Access Control : Assign user roles, manage permissions, and support global SPI users. Loop & Wiring Diagrams : Oversee generation and QA of loop drawings, JB schedules, and wiring diagrams. Data Integrity & QA/QC : Perform quality checks on SPI data against P&IDs, datasheets, and engineering standards. Project Support : Collaborate with engineering, maintenance, and operations teams to support instrumentation deliverables. As-Built Updates : Incorporate plant changes and project modifications into SPI with accurate documentation. Template & Symbol Management : Customize SPI templates, symbols, and reports to meet project-specific needs. System Integration : Interface SPI with other tools like SmartPlant Foundation, SAP, and CAD platforms. Skills & Qualifications Proficiency in SPI/INtools (v2007 or later) Strong understanding of instrumentation systems (field instruments, control valves, DCS/PLC) Familiarity with ISA standards , P&IDs, and instrument datasheets Experience with CAD tools , GSAP , and Microsoft Office Degree/Diploma in Instrumentation, Electronics, or Electrical Engineering Additional Knowledge of SQL , SmartSketch , or Lean CI methodology Preferred candidate profile Immediate Joiners Prior work exp in the same field is must Interested candidates share your resume on the given mail id hr@prvaa.com to schedule your interviews right away!!

Develop verification testbench components for chip/module level using System Verilog, C/C++. Use Verification methodologies (Object oriented, UVM etc) to develop extendable test-bench/test-cases environment. Define and execute detailed verification plan from spec working with architects, designers, system engineers. Write tests, Debug tests, automate regression scripts and regression environment. Incorporate code-coverage, functional coverage, assertions, cover-groups etc to achieve 100% verification completeness prior to tapeout. Organized and creative thinker, motivated, and independent learner who can multitask in a dynamic environment, able to create and implement new solutions where required. Excellent debugging skills in both SW and ASIC hardware. Must be good in building verification environments preferably using Verilog, System Verilog, UVM, C/C++/PLI etc. Proficiency in scripting language like Perl, Tcl/Tk, Shell is a definite plus. Experience with simulators like ncVerilog (Incisive), VCS, Eldo and debug tools like Verdi/Debussy. Good understanding of latest formal verification techniques, assertions, properties is a plus. Understanding or prior experience with Industry standard protocols like USB/SPI/SATA/Ethernet/DisplayPort/SRIO/DDR/PCIE/DDR4/LPDDR4/DFI etc is a definite plus. Understanding or Prior Experience in ARM/Tensillica Processor platforms is a definite plus. Good written and oral communication skills. Ability to clearly document plans.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Design and develop instrumentation systems for water, wastewater, and desalination projects using Revit and/or Plant 3D software. Create and modify technical drawings and models based on verbal and visual instructions from project managers and engineers. Manage work-sets and control visibility in Revit and/or Plant 3D models to ensure efficient collaboration with team members. Utilize various parameters in Revit and/or Plant 3D families and schedules to optimize design processes. Integrate specifications into models using Revit and/or Plant 3D, ensuring compliance with project requirements. Collaborate with multidisciplinary teams to coordinate instrumentation designs with other engineering disciplines. Perform quality control checks on instrumentation designs and drawings to maintain high standards of accuracy. Assist in the development of instrumentation design standards and best practices for the organization. Provide technical support and mentorship to junior designers and drafters. Participate in client meetings to present instrumentation designs and address technical queries. Stay updated on the latest trends and technologies in water, wastewater, and desalination instrumentation systems. Contribute to the preparation of project proposals and cost estimates for instrumentation components. Troubleshoot and resolve design-related issues during project execution phases. Ensure all designs comply with relevant industry standards, codes, and regulations. Assist in the development of equipment specifications and procurement documents for instrumentation system. Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. 7 - 10 Years of experience in wastewater/water industry. Working Experience using Revit and/or Plant 3D and AutoCAD for water market-related designs. Drafting course from a recognised institute. Working experience using REVIT, AutoCAD and Microstation. Professional registration in their designated home office country or be in active pursuit of such registration. Demonstrated proficiency in instrumentation design for water, wastewater, and desalination projects. Strong knowledge of industry standards and regulations related to water and wastewater instrumentation. Experience with project management and coordination in multidisciplinary teams. Excellent communication and presentation skills for client interactions. Familiarity with equipment specifications and procurement processes for instrumentation systems. Ability to mentor junior designers and contribute to team development. Strong problem-solving skills and attention to detail. Additional Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our employees and their families. We also provide a robust global well-being program. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. #LI-FS1

3 to 5 years experience Strong knowledge in Embedded-C Strong know-how in Number system, embedded peripherals UART/I2C/SPI/CAN.

In this role, you will: Support Operations in completing larger and more complex business, operational, and customer support initiatives and overall effectiveness of team performance Use technical expertise in the designated area and resolve escalated issues Provide feedback and present ideas for improving or implementing processes and customer support Perform complex operational and customer support initiatives within Operations functional area Assist staff, managers, and colleagues and provide guidance and interpretation of policies and procedures Apply technical knowledge and expertise to perform work and action requests Provide subject matter expertise and interpretation of procedures to staff Collaborate and consult with peers, colleagues, and managers to resolve issues and achieve goals Interact with internal customers Receive direction from leaders and exercise independent judgment while developing the knowledge to understand function, policies, procedures, and compliance requirements Required Qualifications: 4+ years of operations support experience, or equivalent demonstrated through one or a combination of the following: work experience, training, military experience, education

Hands-on experience in Python scripting and automation using the PyTest framework. Strong understanding of communication protocols such as Ethernet/IP, Modbus, SPI, I2C, and MQTT. Familiarity with RTOS or Linux operating systems, including basic networking and console commands. Practical knowledge of object-oriented programming (OOP) concepts in Python. Experience with AUTOSAR architecture and Linux platform. Expertise in firmware unit testing and functional automation testing using Python. Working knowledge of REST APIs and Docker is desirable. Mandatory Skills (as required by the customer): Proficient hands-on Python experience with OOP AUTOSAR and Linux platform familiarity Firmware testing expertise Unit testing and functional automation using Python Knowledge of any communication protocol Understanding of REST APIs Docker experience (good to have)

Job Title: IoT Firmware Developer Location: Bangalore Job Type: Full-Time About Us: Epiroc is a leading innovator in the IoT space for Mining and Construction industry, dedicated to creating cutting-edge solutions that connect the world. We are looking for a talented IoT Firmware Developer to join our dynamic team and help drive the development of our IoT devices. Job Description: As an IoT Firmware Developer, you will be responsible for developing and implementing firmware solutions for our IoT devices. The job extends to work on end-to-end solutions including application ware using different technology stack that brings great learnings along. You will work closely with our hardware and software teams to ensure seamless integration and optimal performance of our products. Key Responsibilities: Develop, test, and maintain firmware and edge software for IoT devices. Develop, test, and maintain applications for IoT devices. Collaborate with hardware engineers to design and implement firmware solutions. Identify hardware for potential new solutions, including determining necessary connections, protocols, and other requirements. Write efficient and testable code to meet specific requirements and ensure operational functionality Provide production support and troubleshoot issues related to firmware Drive the technical design, ongoing configuration, testing, and maintenance of IoT applications (new deployments and enhancements) Ensure software is optimized for performance, reliability, and power consumption. Stay updated with the latest industry trends and technologies to incorporate best practices into firmware development. Qualifications: Bachelors degree in computer science, Electrical Engineering, or a related field. Proven experience in developing firmware for IoT devices. Proficiency in embedded C / C++ programming languages Experience with IoT platforms Strong understanding of embedded systems and real-time operating systems (RTOS). Familiarity with communication protocols such as MQTT, HTTP, and CoAP. Excellent problem-solving skills and attention to detail. Ability to work collaboratively in a team environment. Preferred Qualifications: Masters degree in a related field. Experience with wireless communication technologies (e.g., Bluetooth, Zigbee, LoRa). Knowledge and experience working with .NET technology stacks on applications in IoT domain Knowledge of security best practice for IoT devices. Knowledge and experience from Mining and Construction or similar industries. Experience with Agile development methodologies. What We Offer: Competitive salary and benefits package. Opportunity to work on innovative projects with a talented team. Professional development and growth opportunities. Flexible working hours and a supportive work environment.

The opening is for the position of SP3D / E3D Administrator. As a candidate, you are expected to be proactive, assertive, and take responsibility for your job. Good communication skills are a must for this role as you will be required to interact with all departments and resolve SP3D related issues effectively. Your main role as an SP3D / E3D Administrator will involve handling full control of setup, administration, and RDB customization of engineering software such as Intergraphs Smart Plant 3D, Smart Plant P&ID, AutoCAD Plant 3D, SPEL, and SPI. You should be proficient in SP3D/PDMS/PLANT 3D/Autoplant Catalog, spec creations customization in reports, Oracle DB setup/SQL instance creation, integrating SPI/SPPID, modifying Data Dictionary Manager, and customizing symbols and libraries. Additionally, you will be responsible for catalog preparation, bulk loading specs/catalogs based on user requirements, preparing model review files from applications, presenting to clients with animations, and reporting the tags. The ideal candidate should have a minimum of 8 years of relevant experience and be well-versed in SPR/PDS/E3D software with in-depth knowledge of the database. Familiarity with Navis/SPR review tool and Smart Plant Review is also required. The job location for this position is in Bangalore/Chennai. Tecnicas Reunidas group (TR) is a leading Oil & Gas International Engineering and Construction Company that specializes in the design, construction, and management of the execution of industrial plants worldwide. They are involved in projects related to hydrogen, biomass, biofuels, decarbonization, artificial intelligence, and digitization. The concepts of sustainable growth, decarbonization, and energy transition represent the culture of Tecnicas Reunidas group.,

Job Description: Experience on Linux and/or embedded systems and peripherals interfaces validation. 6+ years of overall experience in embedded Software testing with good understanding of I2C/I3C, SPI, PCIe, USB, SPI/eSPI, GPIO/SGPI. Bachelors degree in computer science or related field. Experience in NIC drivers in Linux, BMC and firmware testing. Strong Networking, PCIe, BMC background. Familiarity with ARM CPU and SOC system architecture, microprocessor, and microcontroller fundamentals (caches, buses, memory controllers, DMA, etc.) Experience with troubleshooting integration issues including root-cause analysis Solid understanding of software development lifecycle (SDLC), software testing lifecycle (STLC), software testing methodologies, and agile development practices. Familiarity with Atlassian tools (Jira, Confluence, etc) Experience working with SCM tools like Git/ SVN Automation testing experience using python and Pytest\Robot framework Job Category: Others Job Type: Full Time Job Location: AhmedabadBangaloreGurgaonKochiNoidaPollachiPune Experience: 8+ years Notice period: 0-15 days,

Job Description: Proven C programming. Min. 3 year experience working with BMC or openBMC software stack, IPMI, etc. Designing and Developing performance optimized active monitoring BMC solutions using DMTF Standards including MCTP, Redfish, SPDM and PLDM specifications. Good understanding of Linux kernel, uboot, device drivers, UEFI / BIOS Experience with various peripherals such as PCIe, USB, SDIO, SPI, I2C, I2S, GPIO, etc. Should have min 5 years total experience in embedded domain Job Category: Embedded HW_SW Job Type: Full Time Job Location: Ahmedabad Experience: 5+ years Notice period: 0-15 days,

As an experienced professional with a minimum of 6 years of Linux Kernel expertise, you will be responsible for utilizing your practical knowledge and hands-on experience in Linux Kernel, Drivers, and Linux Embedded Systems. Your role will involve demonstrating an excellent understanding of Linux internals, Realtime Linux, RT porting, and Android LINUX Kernel. Additionally, you will be expected to possess hands-on knowledge of Linux Driver Porting, including UFS, Filesystem, I2C, SPI, Ethernet, UART, and Display. An essential part of your responsibilities will include analyzing and fixing Kernel Crashes, as well as engaging in Open-source development activities. While not mandatory, knowledge of Hypervisor systems would be considered advantageous for this role. Your expertise in the Infotainment domain would also be highly valued. Your contribution to the team will be pivotal in driving innovation and ensuring the seamless functioning of Linux Kernel-related processes within the organization. If you are a proactive individual with a passion for Linux Kernel development and a keen eye for detail, we encourage you to apply for this exciting opportunity.,

As a skilled professional with 3 to 7 years of experience in C programming and Linux kernel, you will be responsible for various tasks related to software development and maintenance. Your primary responsibilities will include: - Demonstrating proficiency in writing efficient and high-quality C programming code. - Utilizing your expertise in embedded software development to contribute to project success. - Employing hands-on experience with Unix/Linux development tools such as GDB and Make. - Utilizing your knowledge and experience in Kernel level tasks, including kernel upgrades or patches. - Leveraging your skills in Linux systems programming to enhance system performance. - Demonstrating proficiency in working with protocols like I2C, SPI, and Ethernet. - Showcasing excellent debugging skills and the ability to navigate and comprehend large code bases effectively. - Utilizing strong communication skills to collaborate effectively with team members and stakeholders. Additionally, the ideal candidate for this position must possess the following qualifications: - Proficiency in writing high-quality software in C/C++. - Extensive experience in the development and maintenance of storage switches. - Strong debugging skills and the ability to comprehend complex code bases. - Experience in storage networks, specifically SAN, Fiber Channel, and FC2 protocol. - Good knowledge of device drivers, IPCs, and other related concepts. - Understanding of OS concepts and the ability to work with make files effectively. - Strong communication skills to facilitate effective collaboration and knowledge sharing within the team.,

You should have at least 4-10 years of experience with a solid understanding of International Codes & Standards and General I&C Engineering. Your responsibilities will include preparing Instrument Index and I/O lists, sizing and selecting instruments, creating Instrumentation data sheets, preparing control system vendor scopes, and managing material requisitions and supplier documents. You will also be evaluating vendor quotations, liaising with various disciplines for input, guiding designers, and ensuring the quality of design and drawings for fabrication purposes. Experience in detailed engineering of offshore brownfield projects is preferred. In terms of qualifications, you should have a Bachelor's Degree in Control and Instrumentation with a minimum of 8 years of experience in EPC / FEED projects within the Oil and Gas Industry. Strong communication and interpersonal skills are necessary. Proficiency in SPI, AVEVA Instrumentation, Smart plant review, ConVAL, and Instrucal will be an advantage.,

Minimum qualifications: Bachelor s degree, or equivalent practical experience. 8 years of experience in software development in embedded domain, data structures, algorithms, and software design. 3 years of experience with design, development, and testing of embedded software drivers for the next generation smart devices. 3 years of experience in a technical leadership role; overseeing projects, with 2 years of experience in people management. Preferred qualifications: Master's degree or PhD in Computer Science or related technical field. Experience with interface protocols (e.g., USB, SPI, I2C, UART, UFS, PCIe), power management, system integration including software stacks, and drivers. Experience with ARM or other low-power SoC architectures, memory system, fabric etc. Experience working with hardware designers/reading schematics. Knowledge of embedded systems development, RTOS concepts, device drivers and hardware/software integration. About the job Like Google's own ambitions, the work of a Software Engineer goes beyond just Search. Software Engineering Managers have not only the technical expertise to take on and provide technical leadership to major projects, but also manage a team of Engineers. You not only optimize your own code but make sure Engineers are able to optimize theirs. As a Software Engineering Manager you manage your project goals, contribute to product strategy and help develop your team. Teams work all across the company, in areas such as information retrieval, artificial intelligence, natural language processing, distributed computing, large-scale system design, networking, security, data compression, user interface design; the list goes on and is growing every day. Operating with scale and speed, our exceptional software engineers are just getting started -- and as a manager, you guide the way. With technical and leadership expertise, you manage engineers across multiple teams and locations, a large product budget and oversee the deployment of large-scale projects across multiple sites internationally. As a Software Engineer in Firmware and Silicon, you will work across both hardware and software domains. Our vertically integrated team spans the entire stack, from hardware development through applications. You will manage a team of developers responsible for delivering firmware, libraries, and tools that support silicon validation and the productization of Google custom silicon. Google's mission is to organize the world's information and make it universally accessible and useful. Our team combines the best of Google AI, Software, and Hardware to create radically helpful experiences. We research, design, and develop new technologies and hardware to make computing faster, seamless, and more powerful. We aim to make people's lives better through technology. Responsibilities Manage a team of developers to deliver firmware, libraries, and tools for silicon validation and productization of Google custom silicon. Develop new software, hardware, and system architecture to support future applications. Design, development, and testing of embedded software drivers for the next generation smart devices. Design, guide and vet systems designs within the scope of the broader area, and write product or system development code to solve ambiguous problems. Review code developed by other engineers and provide feedback to ensure best practices (e.g., style guidelines, checking code in, accuracy, testability, and efficiency).

Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Software Engineer, you will design, develop, create, modify, and validate embedded and cloud edge software, applications, and/or specialized utility programs that launch cutting-edge, world class products that meet and exceed customer needs. Qualcomm Software Engineers collaborate with systems, hardware, architecture, test engineers, and other teams to design system-level software solutions and obtain information on performance requirements and interfaces. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field. Preferred Qualifications: Debug and Development of DDR init & run time driver sequences. Will be working on state-of-the-art DDR technology LP4x/LP5x. Opportunity to get the understanding of DDR technology. Will be responsible for driving multiple programs. Need to work on issues with multiple teams (performance, Phy, controller design etc.) Need to analyze lot of data and need to recognize patterns. Working on triage of the DDR issues. Test case enhancements and development Principal Duties and Responsibilities: Job description Minimum Qualifications The charter of the CoreBSP-DDR SW System team is to ensure that the end-product qualifies the defined acceptance criteria for DDR by meeting stability, Power, and Performance Goals . The team is looking for a candidate who has strong understating of system level test methodologies and run validations on mobile systems. The position involves Understanding of SOC Architecture and DDR SW Systems, identifying and debugging DDR systems issues ( memory corruptions, Memory Lock-ups, Bit flips, memory leaks etc..)reported by memory validation and also running system level validations tests. The engineer would have opportunity to interact with different SW & HW teams to understand DDR systems. The candidate is expected to own and drive multiple chipsets in DDR tech area. This position gives an exposure to understand various quality stages from product development to commercial launch of the product. Skills: C, Python, Embedded system , JTAG , processor architecture, RTOS operating system, core BSP driver level development and debug ,CPU architecture , SOC System knowledge. DesirableDDR technology Level of Responsibility: Works under supervision. Decision-making affects direct area of work and/or work group. Requires verbal and written communication skills to convey basic, routine factual information. Tasks require multiple steps which can be performed in various orders; some planning, problem-solving, and prioritization must occur to complete the tasks effectively.

Role & responsibilities : The role involves designing, implementing and bug fixing device drivers for various interfaces like I2C, SPI, eMMC, SPIO, USB, PCIe, Ethernet, Display, camera etc. Preferred candidate profile Excellent programming skills in C Design, Implementation and debugging of Linux device drivers Ability to read and understand board schematics Knowledge of processor architectures for ARM or RISC-V Deep knowledge on Linux internals and Linux Kernel Architecture Experience on tools like Git, Yocto etc. Experience in debugging with JTAG, Signal Analyzers etc. BSP (Board Support Package) bringup experience including boat loader and Uboot. Good to Have Technical Skills: Experience in code upstreaming and Open Sourcing. Behavioral/ Non-Technical: Strong analytical and problem-solving skills Excellent verbal and written communication skills Self-managed and able to learn and adapt

> Role Purpose The purpose of this role is to the first point of contact for the B2B users who call Wipro Service Desk to troubleshoot appropriate end user issues in line with Wipros Service Desk objectives Do 1. Be responsible for primary user support and customer service a. Respond to queries from all calls, portal, emails, chats from the client b. Become familiar with each client and their respective applications/ processes c. Learn fundamental operations of commonly-used software, hardware and other equipment d. Follow standard service desk operating procedures by accurately logging all service desk tickets using the defined tracking software e. Ensure that the scorecard is maintained as per SoW with respect to TAT, SLA & hits f. Manage all queries or escalate if not resolve as per the defined helpdesk policies and framework 2. Regular MIS & resolution log management on queries raised a. Record events and problems and their resolution in logs b. Follow-up and update customer status and information c. Pass on any feedback, suggestions, escalations by customers to the appropriate internal team d. Identify and suggest improvements on processes, procedures etc Deliver No PerformanceParameter Measure 1 Service Desk Delivery Adherence to TAT, SLA as per SoW Minimal Escalation Customer Experience 2 Personal Attendance Documentation etc Mandatory Skills: TIS Service Desk.

SUMMARY Job Title: Experienced Car Inspector & Maintenance Technician Automobile Industry We are seeking a qualified and experienced Car Inspector and Maintenance Technician to join our team. The ideal candidate should have strong expertise in car diagnostics, inspection, and maintenance, preferably with experience in the GCC region . Proficiency in Arabic and possession of valid educational documents are essential. Key Responsibilities: Conduct thorough vehicle inspections to identify mechanical and safety issues Perform regular maintenance and repairs on a wide range of vehicles Diagnose technical problems using modern automotive tools and systems Ensure compliance with automotive industry standards and safety regulations Maintain detailed service records and inspection reports Collaborate with other technicians and departments to ensure timely service delivery Requirements Key Requirements: Minimum of 5 years of experience in the automobile industry Proven knowledge of car inspection, repair, and maintenance procedures GCC work experience is highly preferred Proficiency in Arabic (speaking, reading, and writing) Must hold valid educational certificates/documents Strong diagnostic and troubleshooting skills Benefits Benefits: Attractive salary package Free accommodation provided 2 - year employment visa Air ticket (flight) included

> Role Purpose The purpose of the role is to resolve, maintain and manage clients software/ hardware/ network based on the service requests raised from the end-user as per the defined SLAs ensuring client satisfaction Do Ensure timely response of all the tickets raised by the client end user Service requests solutioning by maintaining quality parameters Act as a custodian of clients network/ server/ system/ storage/ platform/ infrastructure and other equipments to keep track of each of their proper functioning and upkeep Keep a check on the number of tickets raised (dial home/ email/ chat/ IMS), ensuring right solutioning as per the defined resolution timeframe Perform root cause analysis of the tickets raised and create an action plan to resolve the problem to ensure right client satisfaction Provide an acceptance and immediate resolution to the high priority tickets/ service Installing and configuring software/ hardware requirements based on service requests 100% adherence to timeliness as per the priority of each issue, to manage client expectations and ensure zero escalations Provide application/ user access as per client requirements and requests to ensure timely solutioning Track all the tickets from acceptance to resolution stage as per the resolution time defined by the customer Maintain timely backup of important data/ logs and management resources to ensure the solution is of acceptable quality to maintain client satisfaction Coordinate with on-site team for complex problem resolution and ensure timely client servicing Review the log which Chat BOTS gather and ensure all the service requests/ issues are resolved in a timely manner Deliver NoPerformance ParameterMeasure1.100% adherence to SLA/ timelines Multiple cases of red time Zero customer escalation Client appreciation emails Mandatory Skills: TIS Service Desk.

> Role Purpose The purpose of this role is to the first point of contact for the B2B users who call Wipro Service Desk to troubleshoot appropriate end user issues in line with Wipros Service Desk objectives Do 1. Be responsible for primary user support and customer service a. Respond to queries from all calls, portal, emails, chats from the client b. Become familiar with each client and their respective applications/ processes c. Learn fundamental operations of commonly-used software, hardware and other equipment d. Follow standard service desk operating procedures by accurately logging all service desk tickets using the defined tracking software e. Ensure that the scorecard is maintained as per SoW with respect to TAT, SLA & hits f. Manage all queries or escalate if not resolve as per the defined helpdesk policies and framework 2. Regular MIS & resolution log management on queries raised a. Record events and problems and their resolution in logs b. Follow-up and update customer status and information c. Pass on any feedback, suggestions, escalations by customers to the appropriate internal team d. Identify and suggest improvements on processes, procedures etc Deliver No PerformanceParameter Measure 1 Service Desk Delivery Adherence to TAT, SLA as per SoW Minimal Escalation Customer Experience 2 Personal Attendance Documentation etc Mandatory Skills: TIS Service Desk.

Client - Cisco Experience - 5+Years Location - Bangalore : Must have in-depth working experience with Java/J2EE, Web Services using JSON. Experience with Multithreaded systems and Object-Oriented design. Must have strong work experience with Spring, Spring boot, Hibernate along with Unit Test (Junit classes, etc.) Experience working with Microservices based applications Experience working with databases such as SQL. Hands-on experience in HTML, CSS, Agile & Scrum Good to have Good knowledge of messaging systems like Kafka Education Required: Bachelors degree or equivalent in business analysis/process analysis, organizational development or related discipline or equivalent. Perks & Benefits: Health and Wellness:Healthcare policy covering your family and parents. FoodEnjoy a scrumptious buffet lunch at the office every day (For Bangalore) Professional DevelopmentLearn and propel your career. We provide workshops, funded online courses and other learning opportunities based on individual needs. Rewards and RecognitionsRecognition and rewards programs in place to celebrate your achievements and contributions. Why join Relanto Health & Family:Comprehensive benefits for you and your loved ones, ensuring well-being. Growth Mindset:Continuous learning opportunities to stay ahead in your field. Dynamic & Inclusive:Vibrant culture fostering collaboration, creativity, and belonging. Career Ladder:Internal promotions and clear path for advancement. Recognition & Rewards:Celebrate your achievements and contributions. Work-Life Harmony:Flexible arrangements to balance your commitments.

. Responsibilities You will be part of this platform team, responsible for developing platform software in the areas of: Board bring-up related experience. 10G, 40G, 100G, 400G, 800G interface related platform software like interface drivers, etc. Platform infrastructure-related software like Routing Engine Redundancy/High Availability, Chassis/line card, fabric, Optics, etc. Timing software in PTP, SYNCE & Grand Master You will be responsible for these product developments in the platform area in either JunOS or Junos evolved software architecture. In addition to the development activity, you are required to work closely with system and solution test teams to ensure products/solutions delivered are of the highest quality. You will be required to work closely with Juniper Technical Assistance Team for providing engineering assistance in supporting critical customer escalations for customer deployments. Requirements BTech / MTech in CS/CE or related field with proven experience. Good understanding of hardware-level details for Optics, PCIe, SPI, I2C, Retimers, FPGA, CPLD, MDIO, Flash Driver Proficiency with device drivers, system bring-up, FreeBSD/Linux internals. Understanding of Ethernet, OTN, SONET, etc. technologies. Strong technical, analytical, and problem-solving skills. Strong in C, C++ programming, OO analysis & design, data structures, and system debugging skills. Prior software development experience on networking products.