7 Sops Preparation Jobs

We are looking for a skilled Battery Management System (BMS) Engineer with a solid understanding of BMS architecture, components, and safety features. The ideal candidate should have experience in failure analysis, problem-solving, and Li-Ion batteryassembly, including cylindrical, pouch, and prismatic cells, along with expertise in LV and HV battery system handling. The role involves developing and integrating new processes in the New Product Development Stage (NPDS), including design for assembly (DFA), design for safety (DFS),design verification analysis (DVA), ergonomics, and cable routing. You will work on BMS architecture, including SOC, SOH, cell balancing, fault detection, safety controls, and protection algorithms, and have a deep understanding of thermal management, energy management, and life optimization algorithms. Experience with communication protocols such as RS485, Modbus, and CAN is essential, along with the ability to implement custom communication protocols provided by BMS manufacturers. The role also requires proficiency in preparing SOPs, work instructions, and quality checklists. Familiarity with battery chemistries like NMC and LiFePO4 and an understanding of their impact on BMS behavior are required. Knowledge of functional safety standards (e.g., ISO 26262) is a plus. Additionally, the ability to integrate BMS data into higher-level systems or dashboards for monitoring and control is crucial for this role. Responsibilities Design, develop, and test embedded software and firmware for BMS applications. Integrate and configure BMS hardware including microcontrollers, sensors, and communication interfaces (CAN, UART, SPI, I2C). Implement state-of-charge (SOC), state-of-health (SOH), and cell balancing algorithms. Collaborate with hardware engineers to design PCB layouts and perform hardware-software co-validation. Work with cross-functional teams to ensure compliance with electrical, thermal, and mechanical battery requirements. Develop diagnostic tools and support root-cause analysis of field issues. Document software design, validation protocols, and change logs. Skills Required Solid understanding of Battery Management Systems (BMS) architecture, components, and safety features Failure analysis and problem solving capabilities. Good experience in Li-Ion battery assembly(cylindrical, pouch, prismatic cells), adhesive dispensing, electrical assembly , production engineering and Knowledge of quality check points in battery assembly. Knowledge of LV and HV battery system handling. To develop new processes and integrate in NPDS : DFA, DFS, DVA, Ergonomics and cable routing. Experience in BMS architecture, SOC, SOH, cell balancing, fault detection, safety controls and protection algorithms. Knowledge of thermal management, energy management, and life optimization algorithms. Experience in RS485/Modbus/CAN protocols for communication with BMS and peripheral devices. Proficient in preparing SOPs, work instructions, and quality checklists. Ability to read and implement custom communication protocols provided by BMS manufacturers. Added Advantage: Knowledge of functional safety standards (ISO 26262 or similar) is a plus. Qualifications: B Tech in ECE/EEE Experience: 2 + years of experience in battery management system Location : Technopark , Thiruvananthapuram Skills: soc,quality checklists,problem solving,work instructions,design for safety (dfs),custom communication protocols,li-ion battery assembly,cable routing,prismatic cells,battery management systems (bms),fault detection,soh,new product development stage (npds),ergonomics,cylindrical cells,design for assembly (dfa),cell balancing algorithms,soh algorithms,state-of-health (soh) algorithms,state-of-charge (soc) algorithms,cell balancing,dva,functional safety standards,dfs,modbus,dfa,life optimization algorithms,safety controls,energy management,pouch cells,hv battery system handling,lv and hv battery system handling,can protocols,sops preparation,battery management system,design verification analysis (dva),rs485,failure analysis,protection algorithms,bms architecture,lv battery system handling,soc algorithms,thermal management Show more Show less

You are a skilled Battery Management System (BMS) Engineer with a solid understanding of BMS architecture, components, and safety features. You have experience in failure analysis, problem-solving, and Li-Ion battery assembly, including cylindrical, pouch, and prismatic cells. Your expertise extends to LV and HV battery system handling. Your role involves developing and integrating new processes in the New Product Development Stage (NPDS). This includes design for assembly (DFA), design for safety (DFS), design verification analysis (DVA), ergonomics, and cable routing. You will be working on BMS architecture, focusing on SOC, SOH, cell balancing, fault detection, safety controls, and protection algorithms. A deep understanding of thermal management, energy management, and life optimization algorithms is essential for this role. Your experience with communication protocols such as RS485, Modbus, and CAN is crucial. You must be able to implement custom communication protocols provided by BMS manufacturers. Proficiency in preparing SOPs, work instructions, and quality checklists is required. Familiarity with battery chemistries like NMC and LiFePO4 and knowledge of their impact on BMS behavior are necessary. Knowledge of functional safety standards (e.g., ISO 26262) is considered a plus. You should also be capable of integrating BMS data into higher-level systems or dashboards for monitoring and control. Your responsibilities will include designing, developing, and testing embedded software and firmware for BMS applications. You will integrate and configure BMS hardware, including microcontrollers, sensors, and communication interfaces. Implementing state-of-charge (SOC), state-of-health (SOH), and cell balancing algorithms will be part of your tasks. Collaboration with hardware engineers, compliance with requirements, and developing diagnostic tools will also be crucial aspects of your role. Documenting software design, validation protocols, and change logs is also expected. Your qualifications should include a B Tech in ECE/EEE, and you should have at least 2 years of experience in battery management systems. The location for this position is Technopark, Thiruvananthapuram. Your skills should encompass various aspects related to BMS architecture, NPDS, thermal management, state-of-charge algorithms, and more as mentioned in the job description.,

As a Validation Specialist at Piramal Pharma Solutions, your primary responsibility will involve preparing and updating various validation documents to ensure compliance with regulatory requirements. This includes developing Validation Master Plans (VMP), Process Validation protocols, Computer System Validation protocols, and reports. You will also be responsible for creating product matrices, Cleaning Validation/Verification protocols, qualification/requalification protocols for equipment/instruments, utilities, and facilities, as well as area validation protocols and reports. In addition to validation activities, you will be involved in quality risk assessments, review of calibration certificates, issuance and archival of Batch Manufacturing Records (BMR) and Batch Packing Records (BPR), preparation of Annual Product Quality Review (APQR), line clearance for manufacturing, packing, and dispensing activities, sampling of bulk and finished goods, and review of production records. Furthermore, you will play a key role in managing change controls, deviations, and CAPA (Corrective and Preventive Actions), conducting complaint handling, updating departmental SOPs, providing training as per schedule, coordinating training programs with HR, and ensuring documentation management as per SOP. You will also be responsible for providing necessary documents/data to meet internal and external quality, environmental, health, and safety requirements. Moreover, you will be involved in compliance monitoring through self-inspection programs, audit compliance coordination, preparation of responses to audit reports, and execution of food/dietary supplements regulations for export markets. You will also oversee the implementation of sanitation programs, adherence to EHS norms, and various corporate initiatives. Piramal Group values equal employment opportunity, ensuring that all applicants and employees are treated fairly based on merit, qualifications, skills, and performance. As part of a globally integrated network of facilities, Piramal Pharma Solutions offers a wide range of services across the drug life cycle, making it a trusted partner for innovators and generic companies worldwide.,

You will be responsible for finalizing books of accounts and working on filing ITR's, TAX audit reports, GST Returns, and TDS returns including online rectification under different sections. Your role will involve preparing financial statements in various formats such as T format, AS, IndAS, and IFRS. Reconciliation of statements and preparation of MIS reports will be done as per the requirement. Proficiency in tools like Tally and Excel is essential. You should possess good communication skills for drafting mails, coordination, and follow-up. Willingness to travel within and out of the state is required. You must be able to prepare SOP's, manage project trackers, and ensure timely updates on project movements. Leading and coordinating with the team to deliver results is a key aspect of this role. Knowledge of ROC compliances, compliance under the Income Tax Act, and handling banking operations is necessary. The ideal candidate should have 6 to 7 years of experience and be a CA inter or someone with equivalent qualifications. The offered CTC ranges from 5 to 6.5 lacs.,

The EHS Engineer position requires a professional with 10 years or more of experience in Environment, Health, and Safety management. The ideal candidate should have a BE Civil or Engineering Degree in Environmental, with an ADIS diploma being preferable. Key responsibilities include: - Demonstrating expertise in health and safety management within the Construction Industry or Manufacturing Industry. - Possessing in-depth knowledge and skills in Safety-related practices. - Understanding and complying with legal requirements under Indian health and safety guidelines and regulations, as well as OSHAH safety standards. - Conducting fire safety audits, fire risk assessments, Health and Safety regulatory audits, risk assessments, etc. - Providing on-site Health and Safety support independently. - Developing and implementing health and safety programs. - Communicating effectively and demonstrating strong interpersonal skills in client interactions. - Preparing audit reports and SOPs for health and safety functions. This is a Full-time, Permanent position with a Day shift schedule and potential for performance and yearly bonuses. The ideal candidate should be willing to commute or relocate to Mumbai, Maharashtra, with the possibility of an employer-provided relocation package. Application Questions: - Are you a BE Civil/Mechanical graduate - Do you have 10 years or more of experience in EHS management of high-rise construction projects Experience: - EHS Engineer: 10 years (Preferred) Location: - Mumbai, Maharashtra (Preferred) Work Location: In person Expected Start Date: 21/04/2025,

SOP’s preparation, updating, and implementation. Handling of HVAC operations, service, cleaning, and validation. Conduct preventive maintenance of all equipment. To execute external calibration and validation for the Equipments by an External agency.

SOP’s preparation, updating, and implementation. Handling of HVAC operations, service, cleaning, and validation. Conduct preventive maintenance of all equipment. To execute external calibration and validation for the Equipments by an External agency.