1169 Soldering Jobs - Page 28

Floor Manager Company: Innotrat Labs Location: Chennai, India Experience Level : Mid Level (3+ years of relevant experience in electronics manufacturing, service, and technical operations) About Innotrat Labs: Innotrat Labs is a dynamic and innovative startup focused on developing cutting-edge embedded hardware, IoT solutions, and educational electronics kits. We are committed to fostering a culture of technical excellence, continuous improvement, and hands-on problem-solving. Role Overview: The Floor Manager at Innotrat Labs is a critical hands-on role responsible for overseeing daily technical operations, supporting our R&D and production teams, and ensuring the quality and serviceability of our electronic products. This position requires a highly skilled individual with a strong background in electronics, repair, troubleshooting, and a proactive approach to problem-solving and cross-functional collaboration. Key Responsibilities: ● Perform and oversee precision hand soldering (including SMD/BGA rework) for electronic components, ensuring high quality and adherence to specifications during production and rework processes. ● Assemble, install, and test electronic components, circuits, and devices as per design requirements. ● Maintain and troubleshoot various manufacturing and testing equipment on the floor. ● Collaborate closely with the R&D team for advanced troubleshooting of prototypes and new designs. ● Provide valuable technical insights and feedback to R&D for design improvements and manufacturability enhancements. ● Assist in optimizing production processes based on R&D specifications and feedback. ● Support procurement activities by providing technical specifications for components and raw materials. ● Assist in quality checking incoming electronic components and materials to ensure they meet required standards. ● Liaise with the procurement team to address technical issues with suppliers or alternate component sourcing. ● Diagnose and troubleshoot hardware failures at the chip level for existing products and return merchandise. ● Perform comprehensive circuit board repairs and reworks, ensuring functionality and quality post-repair. ● Conduct root cause analysis on failed products and suggest corrective actions to prevent recurrence. ● Maintain detailed records of testing procedures, failures, and fixes for continuous improvement. ● Provide technical support and guidance to junior technicians and team members on the floor. ● Coordinate daily tasks and resources to ensure efficient workflow and timely completion of production and service targets. ● Ensure strict adherence to ESD (Electrostatic Discharge) protocols and workplace safety standards across all operations. ● Read and interpret schematics, circuit diagrams, and technical manuals to aid in troubleshooting and repair. ● Maintain accurate records of all repair, rework, and testing activities. Qualifications & Skills: ● High School Diploma in Electrical and Electronics Engineering or equivalent technical certification. ● Minimum 3+ years of hands-on experience in electronic product servicing, troubleshooting, repair, and assembly, preferably in consumer, industrial, or security electronics. ● Proven experience with precision hand soldering, including SMD (Surface-Mount Device) and BGA (Ball Grid Array) rework. Technical Proficiency: ● Strong knowledge of microprocessors, ICs, and PCB (Printed Circuit Board) repair techniques. ● Proficiency in using testing tools such as oscilloscopes, multimeters, logic analyzers, hot air rework stations, and infrared reflow ovens. ● Ability to diagnose and troubleshoot hardware failures at the chip level. ● Excellent problem-solving skills with a meticulous attention to detail. ● Strong ability to work effectively with R&D, Procurement, and other cross-functional teams. ● Good communication skills to provide technical guidance and maintain records. ● Ability to work effectively in a high-pressure, dynamic startup environment. Why Join Innotrat Labs? Be a part of a fast-growing startup revolutionizing embedded hardware and educational IoT. You'll have the opportunity to utilize your deep technical expertise, contribute directly to product quality and innovation, and play a pivotal role in our operational success. To Apply: Please send your resume for this role to sravya@innotrat.in

Company Description Westermo India Private Ltd, a Subsidiary of Westermo Network Technologies which provides industrial data communications solutions for demanding applications in the transport, water, and energy markets. With 50 years of experience, Westermo has been a leader in technological development, pushing the limits of what is possible in the industry. Role Description This is a full-time on-site role in Bengaluru for a Repair Engineer reporting to Operations Head. The Person shall be w orking closely with Westermo global team. The Repair Engineer will be responsible for products debugging, electronics component removal, desoldering, soldering, placement of all types of components and packages. Qualifications Degree in Electronics /Electrical Engineering or related field 6-7 Years of hands-on Experience in repair/debug Excellent verbal and written Communication skills in English Electronics components knowledge Experience in Electronics Repair Proficient in Troubleshooting and Soldering Ability to work independently and as part of a team Certifications in electronics repair or related field is a plus IPC 610, IPC 7711/21D Certification is an added advantage Knowledge of failure analysis tools, Root cause analysis report is must

Job Description SMD and THT Soldering : Skilled in Manual soldering of surface mount and through hole components PCB assembly : capable of assembling PCB as per BOM Circuit Testing: Use multimeter and oscilloscope Basic rework and Debugging faults Requirements Diploma in Electronic Engineering ITI in Electronic with experience in PCB Willing to work in the evening shift 3PM to 12 AM. Date Opened 06/23/2025 Job Type Full time Industry IT Services City Ahmedabad State/Province Gujarat Country India Zip/Postal Code 380005

Job Information Date Opened 06/23/2025 Job Type Full time Industry Other Work Experience 2-5 Years City Pune - Baner State/Province Maharashtra Country India Zip/Postal Code 411045 Job Description Job Overview: As a Sr. Hardware Engineer, you will play a critical role in the development of advanced hardware systems and components. You will be responsible for designing, testing, and optimizing hardware solutions, ensuring they meet performance, quality, and reliability standards. This position requires a deep understanding of hardware design principles, strong problem-solving skills, and the ability to work collaboratively with cross-functional teams. Key Responsibilities: Design & Develop prototypes and assemble PCBs in house and develop partners for low volume product manufacturing Responsible for selection of components and understanding datasheets, coordinating with vendors, purchasing required components and maintaining minimum stock. Pre-test designs before handing over to firmware team Work with ODM/OEM partners to design and test hardware solutions. Responsible for selection, design and finalization of product enclosure and coordinating with vendors for the same. Conduct failure analysis and root cause analysis of system bugs and improve performance Working with the firmware team to accomplish required features of each product/design Collaborate with the manufacturer engineering team and partners to ensure product quality. Work with industry partners and researchers to innovate and shape future technologies. Support production team in testing and troubleshooting. Requirements Skills & Knowledge: Should have minimum 5 year experience in hardware design including block diagram, components selection, and schematic design. PCB design (up to 4 layers) will be an added advantage. Strong experience in Embedded/ IoT hardware circuit design. Should have strong knowledge of design tool circuit studio. Hands-on experience in prototyping and validating proof of concept design. Strong experience in hardware troubleshooting. Should be strong in understanding high speed signaling, signal integrity and behavior of electronic circuits. Strong knowledge of protocol I2C, SPI, UART, MODBUS (RS232/RS485), Ethernet. ARM Microcontrollers and Microprocessor architecture and based systems, Preferably STM, Renessa, NXP Should have strong knowledge in RF fundamentals required in efficient hardware design Experience with industrial safety standards. Should have strong knowledge in BLE, Wi-Fi and Cellular communications. Soldering/desoldering SMD all packages components experience is must for prototype PCB assembly and troubleshooting work. Attributes: Self-motivated and driven to achieve and exceed sales targets. Positive Attitude. Strong problem-solving and negotiation skills. Ability to work collaboratively in a team-oriented environment. Flexibility to adapt to changing priorities and handle multiple tasks simultaneously. Benefits Benefits: Comprehensive training and mentorship to fast-track your career development. Competitive compensation package. Health insurance coverage. Collaborative and inclusive work environment that values diversity and innovation. Dynamic and inclusive work environment that fosters personal and professional growth. Join our team and be part of an organization that values your talent, rewards your hard work, and offers endless opportunities for growth and success. Apply now and take the first step towards an exciting and fulfilling career!

The Role We are looking for a technician to assemble, test and debug custom PCBs and drones. The Work Assembly of systems including various sensors, 3D printed parts, carbon fibre parts, motors, controllers and other related components. Soldering, crimping, drilling, sanding, grinding, and handling various manufacturing tools. Searching, dealing and coordinating with vendors for manufacturing and local purchases. Soldering wires, preparing harnesses, and soldering SMD components. Handling Basic electronics. Strictly following all the safety hygiene. We’re looking for someone with Knowledge of PCB assembly, SMD soldering, Hardware tools, crimping, fasteners and adhesives. Has an instinct for good routing and tidy assemblies in a reliable and scalable way. Expereince with Laptop and Mobile PCB Repairing. Experience with Soldering 0402 components, QFNs, BGA, QFP packages, and fine pitch connectors. Expereince with Soldering Equipment, microscope, Multimeter, Oscilloscope and SMD Rework Station. Bonus if you: Have experience with drones. Has experience in maintenance, carpentry etc. Has experience with 3D Printing. If you match the above, Why us Work in a culture that celebrates innovation, creativity, and the freedom to challenge the status quo. We learn from each other, and we have a lot of experience in the robotics field. This is your chance to be at the forefront of a technological revolution. We are creating something that India never had before! Join us and help us design the future of drones!

Set up, operate, and maintain winding machinery to fabricate transformer coils, ensuring accuracy, precision, and adherence to quality and safety standards. 🎯 Key Responsibilities Machine Operation & Setup Configure winding machines (disc, helical, spiral) following engineering drawings and specifications Load/unload coil forms, wire, insulation, and maintain correct tension and alignment . Coil Fabrication & Quality Control Wind primary and secondary coils for various transformer types (LV, MV, HV, disc, helical) Inspect coils continuously and use measuring tools (micrometers, calipers, tape measures) to ensure dimensional and electrical tolerance guide. Perform insulation placement, brazing/soldering of leads, and post-winding testing (e.g., insulation resistance) Maintenance & Troubleshooting Conduct routine preventive maintenance on winding equipment. Identify and resolve minor machine issues Documentation & Compliance Accurately log winding parameters, material usage, measurements, and quality inspection results Adhere to Health, Safety, and Environmental (HSE) protocols, using PPE and following all SOPs . Team Collaboration & Support Cooperate with engineers and supervisors for work planning and technical clarifications Train and guide junior winders when required sgbsmitpowermatla.com+6ironandearth.org+6tealhq.com+6. Physical Tasks Handle heavy coils and materials safely, operate cranes and lifts as needed Stand for extended periods, move components, and work in factory conditions with noise, dust, or varying temperatures 🎓 Qualifications & Skills Education: High school diploma or equivalent; vocational/technical training in electrical or mechanical fields preferred Experience: 1–5 years (or more) of experience in coil winding—including small transformers or large power units Technical Proficiency: Skilled in reading mechanical/electrical drawings, BOMs, winding specs Strong mechanical aptitude; proficient with measuring instruments (micrometer, Vernier caliper) simplyhired.com. Capable of brazing, soldering, lead/bundle management, insulation application bluecollarrecruits.com. Personal Traits: Detail-oriented and focused—capable of repetitive precision tasks . Good physical fitness and endurance for factory work reddit.com.

Embedded Systems Intern – Job Description Company: Academy of Embedded Technology Pvt Ltd Location: Delhi (On-site) Position: Embedded Systems Intern Duration: 3 to 6 Months Stipend: Based on performance and project involvement About the Role: We are looking for passionate and motivated Embedded Systems Interns to join our R&D team. You will get hands-on experience working on live electronics projects in the domains of defense, industrial automation, and instrumentation . This is a unique opportunity to work in a startup environment , directly contributing to the development of real-world embedded systems , from concept to prototype. Key Responsibilities: Assist in microcontroller programming (Arduino, STM32, ESP32, etc.) Support PCB design , schematic capture, and prototyping Participate in testing and debugging of hardware circuits Contribute to product documentation and firmware updates Learn and apply soldering, calibration, and assembly techniques Collaborate with senior engineers on ongoing R&D projects What You Will Learn: Real-world embedded design process Use of tools like KiCad, Altium, MPLAB, STM32CubeIDE , etc. Working with sensors, communication protocols (I2C, SPI, UART) , and power electronics Exposure to defense and PSU-grade design standards How a product evolves from concept to a working prototype Eligibility: Pursuing or completed Diploma/B.Tech/B.E. in Electronics, Electrical, Instrumentation, or related fields Basic knowledge of C/C++ , microcontrollers, and electronic components Eagerness to learn and contribute in a hands-on environment Why Join Us? Work on cutting-edge, socially impactful projects Direct mentoring from experienced engineers Opportunity to convert into a full-time role Be part of a growing Make-in-India electronics startup Job Types: Full-time, Internship Contract length: 6 months Pay: ₹10,000.00 - ₹15,000.00 per month Schedule: Morning shift Supplemental Pay: Yearly bonus Ability to commute/relocate: Azadpur, Delhi, Delhi, Delhi - 110033, Delhi: Reliably commute or planning to relocate before starting work (Preferred) Application Question(s): Upon selection there migh be a probation period, are willing to server 1 week probation ? Location: Azadpur, Delhi, Delhi, Delhi - 110033, Delhi (Preferred)

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chennai Employment Status: Salary Full-Time Function: Finance Req ID: 26707 Job Responsibilities Process of Purchase Prices, Source List, Standard Cost, Current Cost and Transfer Prices for all newly created materials. Coordinated with Local Controllers Maintenance of all the price lists for Intercompany inside and outside of Europe Region inside the SAP system and in GlobalLinc Mass Update in the region of the prices as often as required Job Requirements 4+ years of experience as Product Costing B.Com / M.Com / CMA Inter degree Solid understanding of manufacturing product cost structure Strong skill of Excel and other MS Office Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law. Job Segment: Welding, ERP, Fabrication, SAP, Manufacturing, Technology

Urgent Opening for ITI / Diploma Technician At Gurgaon Sec-18 (IN MNC) Do not Change the Subject line while replying;- Job Description Designation: - Technician Location:- Gurgaon (sec-18) Qualification: - I.T.I /Diploma Experience Require: Fresher to 2 Year experience Salary: - As Per Company Standard Job Responsibility :* 1. Good knowledge of circuits 2. Experience testing assembled PCBs 3. Proficient in soldering 4. Candidate must have experience in Assembling and testing of PCBs along with installation and servicing of electronic/ instrumentation systems. CLIENT PROFILE: Its is ISO (9001:2000) certified company . Its is manufacturing , Design, and marketing of all important constituents of DC Power Plants that is used in telecom installations. Interested candidate kindly Apply on Hrs4@esolutionsindia.net with updated resume and answer of the mandatory question . Thanks & Regards Deepti 8383946206 Hrs4@esolutionsindia.net Esolutions India www.esolutionsindia.net

We’re looking for a laptop service engineer who can carry out Fault diagnosis, Hardware replacement, laptop disassembly/reassembly, and chip-level diagnosis. You will be responsible for identifying issues and restoring laptops to functional condition Required Candidate profile Training or Diploma in laptop repairing. Good understanding of laptop components. Hands-on experience in diagnosing and repairing laptops issues, working with tools like Multimeter, Soldering Iron etc

We are looking for a detail-oriented Quality Analyst to join our electronics manufacturing team. The ideal candidate will be responsible for product testing, troubleshooting, and quality assurance (QA) to ensure that products meet defined standards and specifications before they are dispatched or integrated. Key Responsibilities: Perform functional and performance testing on electronic components and finished products. Identify, document, and troubleshoot defects or failures in PCBs and other electronic assemblies. Ensure adherence to quality standards, procedures, and work instructions . Use tools such as multimeters, oscilloscopes, and other electronic testing equipment for diagnostics. Support production and engineering teams in root cause analysis and corrective action . Maintain detailed QA records and test reports . Participate in continuous improvement initiatives and suggest process enhancements . Conduct incoming quality inspections for raw materials and components, when required. Required Skills: Strong knowledge of electronic components Hands-on experience in troubleshooting PCB faults . Familiarity with standard testing tools and instruments (e.g., multimeter, CRO, LCR meter). Preferred Candidate Profile: 23 years of relevant experience in electronics QA, testing, or troubleshooting. Qualification: Diploma / ITI in Electronics, Electronics & Communication, or a related discipline . Strong problem-solving mindset and attention to detail. Willingness to work in a production i.e. soldering/repair etc.

Hiring GPS Installation Technicians to install and troubleshoot devices in vehicles. 2-wheeler with valid license is mandatory; experience preferred.

We are looking for a detail-oriented Quality Analyst to join our electronics manufacturing team. The ideal candidate will be responsible for product testing, troubleshooting, and quality assurance (QA) to ensure that products meet defined standards and specifications before they are dispatched or integrated. Key Responsibilities: Perform functional and performance testing on electronic components and finished products. Identify, document, and troubleshoot defects or failures in PCBs and other electronic assemblies. Ensure adherence to quality standards, procedures, and work instructions . Use tools such as multimeters, oscilloscopes, and other electronic testing equipment for diagnostics. Support production and engineering teams in root cause analysis and corrective action . Maintain detailed QA records and test reports . Participate in continuous improvement initiatives and suggest process enhancements . Conduct incoming quality inspections for raw materials and components, when required. Required Skills: Strong knowledge of electronic components Hands-on experience in troubleshooting PCB faults . Familiarity with standard testing tools and instruments (e.g., multimeter, CRO, LCR meter). Preferred Candidate Profile: 2–3 years of relevant experience in electronics QA, testing, or troubleshooting. Qualification: Diploma / ITI in Electronics, Electronics & Communication, or a related discipline . Strong problem-solving mindset and attention to detail. Willingness to work in a production i.e. soldering/repair etc. Job Types: Full-time, Permanent, Contractual / Temporary Contract length: 12 months Pay: ₹18,000.00 - ₹22,000.00 per month Benefits: Provident Fund Schedule: Day shift Supplemental Pay: Overtime pay Performance bonus Work Location: In person Speak with the employer +91 9115104460

General Description AIIR Products is a pioneering provider of AI-powered heating and cooling solutions designed to enhance comfort and energy efficiency in multi-family, residential, and hospitality settings. AIIR focuses exclusively on delivering innovative, sustainable systems that leverage advanced machine learning technology. AIIR is committed to creating healthier, more comfortable living spaces through smart technology. Its steadfast dedication to sustainability and innovation drives the development of solutions that improve project outcomes and positively impact the planet. The Role AIIR has an exciting and important opportunity for the right person to join our Intelligent HVAC Systems engineering and product development team to design and commercialize our own unique, purpose-built HVAC systems as an Electronics Engineer. This is a hands-on and highly visible opportunity in a rapidly growing and evolving company with lots of room to grow! We are seeking a person with at least 2 years demonstrated experience with electronic hardware design and testing complex electronic systems such as embedded devices and power electronics systems. Essential Job Functions Support design and development of electronic control hardware for HVAC systems Prepare schematics, layout of electronic circuit boards, and develop and manage parts library to support new product development and design changes to existing products Review component specifications and support selection of appropriate hardware components. Identify and qualify alternative components for EOL/NRND as well as for cost reduction. Modify electronic circuit boards including soldering components on or off as necessary to evaluate functionality and support prototype board development Support product sustaining engineering activities, performing root cause analysis, and revising designs Support the building of prototypes, modify, test, and troubleshooting as needed the electronic hardware and associated HVAC system, components, and instruments. Utilize typical electrical test equipment to analyze as well as troubleshoot board and system level electrical issues Ensure all designs, tests, and development activities are well documented Develop procedures and manuals as necessary Required Qualifications Bachelor’s degree in electrical or Electronics Engineering required 2 years of demonstrable relevant experience Experience with preparation schematics, printed circuit board design and layout, and components selection Demonstrated experience in using electronic CAD tools preferably KiCad and OrCAD/Cadence Hands-on experience working in a lab environment with PCB repair/modifications, troubleshooting, and testing of electronic components and systems with embedded electronics Knowledge and ability to use basic EE tools such as Oscilloscopes, Network analyzers, Signal Generators etc. Good soldering capability and ability to modify PCBs as necessary Good understanding of technologies such as BLE, Wi-Fi, power management, sensor control, USB, UART, I2C, and various bus communication technologies desired Ready for Your Next Big Adventure? If you are a strategic thinker and innovation in the HVAC industry, we want to hear from you! Please submit your resume and a cover letter detailing your relevant experience to [Insert Application Email/Link]. AIIR Products is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Uc09p60Onb

General Description AIIR Products is a pioneering provider of AI-powered heating and cooling solutions designed to enhance comfort and energy efficiency in multi-family, residential, and hospitality settings. AIIR focuses exclusively on delivering innovative, sustainable systems that leverage advanced machine learning technology. AIIR is committed to creating healthier, more comfortable living spaces through smart technology. Its steadfast dedication to sustainability and innovation drives the development of solutions that improve project outcomes and positively impact the planet. The Role AIIR has an exciting and important opportunity for the right person to join our Intelligent HVAC Systems engineering and product development team to design and commercialize our own unique, purpose-built HVAC systems as an Electronics Engineer. This is a hands-on and highly visible opportunity in a rapidly growing and evolving company with lots of room to grow! We are seeking a person with at least 2 years demonstrated experience with electronic hardware design and testing complex electronic systems such as embedded devices and power electronics systems. Essential Job Functions Support design and development of electronic control hardware for HVAC systems Prepare schematics, layout of electronic circuit boards, and develop and manage parts library to support new product development and design changes to existing products Review component specifications and support selection of appropriate hardware components. Identify and qualify alternative components for EOL/NRND as well as for cost reduction. Modify electronic circuit boards including soldering components on or off as necessary to evaluate functionality and support prototype board development Support product sustaining engineering activities, performing root cause analysis, and revising designs Support the building of prototypes, modify, test, and troubleshooting as needed the electronic hardware and associated HVAC system, components, and instruments. Utilize typical electrical test equipment to analyze as well as troubleshoot board and system level electrical issues Ensure all designs, tests, and development activities are well documented Develop procedures and manuals as necessary Required Qualifications Bachelor’s degree in electrical or Electronics Engineering required 2 years of demonstrable relevant experience Experience with preparation schematics, printed circuit board design and layout, and components selection Demonstrated experience in using electronic CAD tools preferably KiCad and OrCAD/Cadence Hands-on experience working in a lab environment with PCB repair/modifications, troubleshooting, and testing of electronic components and systems with embedded electronics Knowledge and ability to use basic EE tools such as Oscilloscopes, Network analyzers, Signal Generators etc. Good soldering capability and ability to modify PCBs as necessary Good understanding of technologies such as BLE, Wi-Fi, power management, sensor control, USB, UART, I2C, and various bus communication technologies desired Ready for Your Next Big Adventure? If you are a strategic thinker and innovation in the HVAC industry, we want to hear from you! Please submit your resume and a cover letter detailing your relevant experience to [Insert Application Email/Link]. AIIR Products is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. YwQLD0k9oN

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chennai Employment Status: Salary Full-Time Function: Information Technology Req ID: 26864 Job Responsibilities Design, implement, and support enterprise network infrastructure including LAN, WAN, WLAN, and cloud networking components. Operate and maintain secure, resilient network systems using industry best practices and modern technologies. Lead or contribute to network integration efforts for mergers and acquisitions, including design, procurement, and deployment. Manage and optimize SD-WAN environments to balance performance, cost, and security. Collaborate with cross-functional teams to support infrastructure projects and ensure seamless integration with other IT systems. Implement and maintain network security controls, including firewalls (e.g., Palo Alto), VPNs, and segmentation strategies. Drive automation and scripting initiatives to streamline network operations and reduce manual tasks. Monitor network performance, troubleshoot issues, and proactively identify areas for improvement. Maintain accurate documentation of network configurations, policies, and procedures. Participate in on-call rotation and provide support during off-hours as necessary. Stay current with emerging technologies and recommend improvements to enhance network capabilities. Job Requirements Bachelor’s degree in Information Systems, Computer Science, or equivalent relevant experience is required. 5+ years of experience in enterprise network engineering and support. Strong hands-on experience with Cisco networking technologies (routing, switching, wireless). Experience with Palo Alto firewalls and/or Prisma cloud services is a plus. Proficiency in SD-WAN technologies and network automation tools (e.g., Ansible, Python scripting). Familiarity with cloud networking (Azure, AWS, or GCP) and hybrid environments. Strong troubleshooting skills and ability to diagnose complex network issues. Excellent communication and documentation skills. Self-motivated, customer-focused, and able to work independently. Relevant certifications (e.g., CCNP, PCNSE, AWS/Azure Networking) are a plus. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

General Description AIIR Products is a pioneering provider of AI-powered heating and cooling solutions designed to enhance comfort and energy efficiency in multi-family, residential, and hospitality settings. AIIR focuses exclusively on delivering innovative, sustainable systems that leverage advanced machine learning technology.AIIR is committed to creating healthier, more comfortable living spaces through smart technology. Its steadfast dedication to sustainability and innovation drives the development of solutions that improve project outcomes and positively impact the planet. The Role AIIR has an exciting and important opportunity for the right person to join our Intelligent HVAC Systems engineering and product development team to design and commercialize our own unique, purpose-built HVAC systems as an Electronics Engineer. This is a hands-on and highly visible opportunity in a rapidly growing and evolving company with lots of room to grow! We are seeking a person with at least 2 years demonstrated experience with electronic hardware design and testing complex electronic systems such as embedded devices and power electronics systems. Essential Job Functions Support design and development of electronic control hardware for HVAC systems Prepare schematics, layout of electronic circuit boards, and develop and manage parts library to support new product development and design changes to existing products Review component specifications and support selection of appropriate hardware components Identify and qualify alternative components for EOL/NRND as well as for cost reduction Modify electronic circuit boards including soldering components on or off as necessary to evaluate functionality and support prototype board development Support product sustaining engineering activities, performing root cause analysis, and revising designs Support the building of prototypes, modify, test, and troubleshooting as needed the electronic hardware and associated HVAC system, components, and instruments Utilize typical electrical test equipment to analyze as well as troubleshoot board and system level electrical issues Ensure all designs, tests, and development activities are well documented Develop procedures and manuals as necessary Required Qualifications Bachelor’s degree in electrical or Electronics Engineering required 2 years of demonstrable relevant experience Experience with preparation schematics, printed circuit board design and layout, and components selection Demonstrated experience in using electronic CAD tools preferably KiCad and OrCAD/Cadence Hands-on experience working in a lab environment with PCB repair/modifications, troubleshooting, and testing of electronic components and systems with embedded electronics Knowledge and ability to use basic EE tools such as Oscilloscopes, Network analyzers, Signal Generators etc Good soldering capability and ability to modify PCBs as necessary Good understanding of technologies such as BLE, Wi-Fi, power management, sensor control, USB, UART, I2C, and various bus communication technologies desired Ready for Your Next Big Adventure? If you are a strategic thinker and innovation in the HVAC industry, we want to hear from you! Please submit your resume and a cover letter detailing your relevant experience to [Insert Application Email/Link]. AIIR Products is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Powered by JazzHR YwQLD0k9oN

General Description AIIR Products is a pioneering provider of AI-powered heating and cooling solutions designed to enhance comfort and energy efficiency in multi-family, residential, and hospitality settings. AIIR focuses exclusively on delivering innovative, sustainable systems that leverage advanced machine learning technology.AIIR is committed to creating healthier, more comfortable living spaces through smart technology. Its steadfast dedication to sustainability and innovation drives the development of solutions that improve project outcomes and positively impact the planet. The Role AIIR has an exciting and important opportunity for the right person to join our Intelligent HVAC Systems engineering and product development team to design and commercialize our own unique, purpose-built HVAC systems as an Electronics Engineer. This is a hands-on and highly visible opportunity in a rapidly growing and evolving company with lots of room to grow! We are seeking a person with at least 2 years demonstrated experience with electronic hardware design and testing complex electronic systems such as embedded devices and power electronics systems. Essential Job Functions Support design and development of electronic control hardware for HVAC systems Prepare schematics, layout of electronic circuit boards, and develop and manage parts library to support new product development and design changes to existing products Review component specifications and support selection of appropriate hardware components Identify and qualify alternative components for EOL/NRND as well as for cost reduction Modify electronic circuit boards including soldering components on or off as necessary to evaluate functionality and support prototype board development Support product sustaining engineering activities, performing root cause analysis, and revising designs Support the building of prototypes, modify, test, and troubleshooting as needed the electronic hardware and associated HVAC system, components, and instruments Utilize typical electrical test equipment to analyze as well as troubleshoot board and system level electrical issues Ensure all designs, tests, and development activities are well documented Develop procedures and manuals as necessary Required Qualifications Bachelor’s degree in electrical or Electronics Engineering required 2 years of demonstrable relevant experience Experience with preparation schematics, printed circuit board design and layout, and components selection Demonstrated experience in using electronic CAD tools preferably KiCad and OrCAD/Cadence Hands-on experience working in a lab environment with PCB repair/modifications, troubleshooting, and testing of electronic components and systems with embedded electronics Knowledge and ability to use basic EE tools such as Oscilloscopes, Network analyzers, Signal Generators etc Good soldering capability and ability to modify PCBs as necessary Good understanding of technologies such as BLE, Wi-Fi, power management, sensor control, USB, UART, I2C, and various bus communication technologies desired Ready for Your Next Big Adventure? If you are a strategic thinker and innovation in the HVAC industry, we want to hear from you! Please submit your resume and a cover letter detailing your relevant experience to [Insert Application Email/Link]. AIIR Products is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Powered by JazzHR Uc09p60Onb

Job Summary: We are looking for a skilled and detail-oriented Mobile Repair Technician to diagnose, troubleshoot, and repair smartphones and tablets. The ideal candidate should have strong knowledge of both hardware and software issues in various brands like Apple, Samsung, Xiaomi, Realme, Oppo, Vivo, etc. Key Responsibilities: Diagnose issues in mobile devices (hardware & software) Perform repairs such as screen replacement, battery replacement, charging port issues, mic/speaker problems Handle software flashing, formatting, and OS updates Test mobile devices after repair for quality assurance Maintain tools and repair kits in proper working condition Maintain records of repairs and inventory of spare parts Provide basic customer support and explain issues to clients Follow safety and ESD (Electrostatic Discharge) precautions Keep up to date with new models and repair techniques Required Skills & Qualifications: 10th / 12th pass or Diploma in Mobile Repairing / Electronics 0–2 years of experience in mobile repair (freshers with training can apply) Good knowledge of Android and iOS device structures Ability to use repair tools (hot air gun, soldering iron, multimeter, etc.) Basic understanding of mobile software tools (SP Flash Tool, Odin, etc.) Soft Skills: Attention to detail Problem-solving ability Good communication and customer handling Time management and responsibility Preferred Industries: Mobile repair shops Authorized service centers Electronics retail stores Mobile service startups Highlight the candidate's ability to diagnose, troubleshoot, and repair mobile devices (both hardware and software), provide excellent customer service, and maintain accurate records.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chennai Employment Status: Salary Full-Time Function: Information Technology Req ID: 26864 Job Responsibilities Design, implement, and support enterprise network infrastructure including LAN, WAN, WLAN, and cloud networking components. Operate and maintain secure, resilient network systems using industry best practices and modern technologies. Lead or contribute to network integration efforts for mergers and acquisitions, including design, procurement, and deployment. Manage and optimize SD-WAN environments to balance performance, cost, and security. Collaborate with cross-functional teams to support infrastructure projects and ensure seamless integration with other IT systems. Implement and maintain network security controls, including firewalls (e.g., Palo Alto), VPNs, and segmentation strategies. Drive automation and scripting initiatives to streamline network operations and reduce manual tasks. Monitor network performance, troubleshoot issues, and proactively identify areas for improvement. Maintain accurate documentation of network configurations, policies, and procedures. Participate in on-call rotation and provide support during off-hours as necessary. Stay current with emerging technologies and recommend improvements to enhance network capabilities. Job Requirements Bachelor’s degree in Information Systems, Computer Science, or equivalent relevant experience is required. 5+ years of experience in enterprise network engineering and support. Strong hands-on experience with Cisco networking technologies (routing, switching, wireless). Experience with Palo Alto firewalls and/or Prisma cloud services is a plus. Proficiency in SD-WAN technologies and network automation tools (e.g., Ansible, Python scripting). Familiarity with cloud networking (Azure, AWS, or GCP) and hybrid environments. Strong troubleshooting skills and ability to diagnose complex network issues. Excellent communication and documentation skills. Self-motivated, customer-focused, and able to work independently. Relevant certifications (e.g., CCNP, PCNSE, AWS/Azure Networking) are a plus. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chennai Employment Status: Salary Full-Time Function: Information Technology Req ID: 26864 Job Responsibilities Design, implement, and support enterprise network infrastructure including LAN, WAN, WLAN, and cloud networking components. Operate and maintain secure, resilient network systems using industry best practices and modern technologies. Lead or contribute to network integration efforts for mergers and acquisitions, including design, procurement, and deployment. Manage and optimize SD-WAN environments to balance performance, cost, and security. Collaborate with cross-functional teams to support infrastructure projects and ensure seamless integration with other IT systems. Implement and maintain network security controls, including firewalls (e.g., Palo Alto), VPNs, and segmentation strategies. Drive automation and scripting initiatives to streamline network operations and reduce manual tasks. Monitor network performance, troubleshoot issues, and proactively identify areas for improvement. Maintain accurate documentation of network configurations, policies, and procedures. Participate in on-call rotation and provide support during off-hours as necessary. Stay current with emerging technologies and recommend improvements to enhance network capabilities. Job Requirements Bachelor’s degree in Information Systems, Computer Science, or equivalent relevant experience is required. 5+ years of experience in enterprise network engineering and support. Strong hands-on experience with Cisco networking technologies (routing, switching, wireless). Experience with Palo Alto firewalls and/or Prisma cloud services is a plus. Proficiency in SD-WAN technologies and network automation tools (e.g., Ansible, Python scripting). Familiarity with cloud networking (Azure, AWS, or GCP) and hybrid environments. Strong troubleshooting skills and ability to diagnose complex network issues. Excellent communication and documentation skills. Self-motivated, customer-focused, and able to work independently. Relevant certifications (e.g., CCNP, PCNSE, AWS/Azure Networking) are a plus. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law. Job Segment: Network, Cloud, Computer Science, Welding, Cisco, Technology, Manufacturing

Company Description We suggest you enter details here. Role Description This is a full-time, on-site role located in Delhi, India. The Electronic Mechanic will be responsible for maintaining and repairing electronic sports equipment. Day-to-day tasks include supervising electronic systems, performing soldering and electromechanical work, troubleshooting electronic issues, and ensuring that all equipment functions properly. The Electronic Mechanic will also need to document maintenance procedures and collaborate with other team members to ensure an efficient workflow. Qualifications \n Supervisory Skills Soldering and Electromechanics expertise Experience in Troubleshooting and Electronics Strong attention to detail and manual dexterity Ability to work independently and as part of a team Technical certification or diploma in Electronics or related field is preferred Previous experience in a similar role is beneficial

Job Title: Auto Bussing – Senior Operator Location: Hayathabad, Chandanvelly. Department: Production / Manufacturing Industry: Solar Panel Manufacturing Experience Required: 3-6 Years in Auto Bussing / Solar Module Assembly Employment Type: Full-Time Job Summary: We are seeking a skilled and experienced Auto Bussing Senior Operator to join our fast-growing solar module manufacturing team. The ideal candidate will be responsible for overseeing the auto bussing line in the solar panel production unit, ensuring seamless operation, process efficiency, and product quality. Key Responsibilities: Operate and monitor automatic bussing machines in the solar panel assembly line. Perform machine setup, changeovers , and minor maintenance as required. Ensure correct alignment and soldering of interconnect ribbons and busbars on solar cells. Conduct routine quality checks and troubleshoot any operational issues. Work closely with the QA team to ensure modules meet IEC and company standards. Maintain daily production logs and report any deviations to the supervisor. Provide support and training to junior operators and maintain a clean and safe work environment. Assist in continuous improvement initiatives to enhance line productivity and machine uptime. Key Skills & Requirements: Minimum 3 years of hands-on experience in Auto Bussing / Solar Module Production . Sound knowledge of solar cell interconnection and soldering processes. Familiarity with semi-automated/automated solar panel assembly lines . Ability to read technical drawings and follow SOPs. Strong attention to detail and a proactive approach to problem-solving. Team player with flexibility to work in shifts. ITI/Diploma in Electrical/Electronics/Mechanical or relevant trade preferred. Job Type: Full-time Pay: ₹20,000.00 - ₹23,000.00 per month Benefits: Health insurance Provident Fund Schedule: Day shift Morning shift Work Location: In person

Job Title: JB Fixing & Soldering Technician – Solar Panel Manufacturing Location: Hayathabad, Chandanvelly Company: Junna Solar Systems Limited. Department: Production / Assembly Line Experience: 1–3 Years’ Salary: As per industry standards About Us: Junna Solar Systems Ltd. is one of India’s leading solar PV module manufacturers, committed to delivering sustainable energy solutions. With state-of-the-art production lines and global-quality certifications, we aim to power the future with innovation and clean technology. Job Overview: We are looking for a detail-oriented and technically skilled JB Fixing & Soldering Technician to join our solar module assembly team. This role involves the precise installation of junction boxes (JB) and soldering of solar cell strings, ensuring quality, efficiency, and electrical safety. Key Responsibilities: Perform JB (Junction Box) fixing on solar PV modules as per defined specifications. Carry out soldering of interconnect ribbons to solar cells and strings using manual or semi-automated soldering tools. Ensure proper polarity, alignment, and adhesion during JB installation. Inspect connections for cold joints, poor soldering, or any faults using visual or testing tools. Follow standard operating procedures (SOPs), quality protocols, and EHS (Environmental, Health & Safety) standards. Collaborate with QC and production supervisors to meet daily targets with zero defects. Maintain proper documentation and daily reports of work done. Assist in preventive maintenance of soldering tools and JB fixtures. Required Skills & Qualifications: ITI / Diploma in Electrical, Electronics, or relevant trade. Proven experience in soldering, preferably in solar, electronics, or PCB manufacturing. Good understanding of electrical safety, polarity checks, and visual inspection criteria. Ability to read technical drawings and work instructions. Attention to detail and ability to work in a high-paced production environment. Team player with a commitment to quality and timelines. Job Type: Full-time Pay: ₹20,000.00 - ₹22,000.00 per month Benefits: Health insurance Provident Fund Schedule: Day shift Morning shift Work Location: In person

Job Title: ATW Stringer Operator / Technician Department: Production / Module Manufacturing Location: Hyderabad, Telangana Company: Junna Solar Systems Limited Experience: 1–5 years in Solar PV Module Manufacturing Employment Type: Full-Time About Junna Solar: Junna Solar Systems Pvt Ltd is one of India's leading solar panel manufacturers, committed to delivering high-efficiency and sustainable energy solutions. Our state-of-the-art manufacturing unit is equipped with advanced automated machinery to produce high-quality solar PV modules for global markets. Job Summary: We are looking for an experienced and skilled ATW Stringer Operator/Technician to join our solar module production team. The ideal candidate will operate and maintain the ATW stringer machine , ensuring optimal productivity, minimal wastage, and adherence to quality standards in the cell stringing process. Key Responsibilities: Operate the ATW automatic stringer machine for solar cell interconnection. Ensure proper alignment, soldering, and tabbing of solar cells. Monitor the stringing process parameters and make necessary adjustments. Conduct regular machine checks, preventive maintenance, and basic troubleshooting. Inspect and report any defects in cell strings before lamination. Record production data and quality checks as per SOP. Coordinate with quality and maintenance teams for continuous improvement. Maintain a clean, safe, and organized working environment in accordance with 5S and ISO standards. Desired Candidate Profile: ITI / Diploma / B.Tech in Electrical, Electronics, Mechanical, or related fields. 1–5 years of hands-on experience in solar PV manufacturing, specifically in ATW or equivalent stringer machines . Good understanding of PV cell handling, soldering processes, and quality requirements. Able to work in shifts and under production targets. Strong focus on quality, efficiency, and team collaboration. Job Type: Full-time Pay: ₹25,000.00 - ₹30,000.00 per month Benefits: Health insurance Provident Fund Schedule: Day shift Morning shift Supplemental Pay: Overtime pay Work Location: In person Expected Start Date: 01/07/2025