937 Simulink Jobs - Page 7

AMRITA VISHWA VIDYAPEETHAM is looking for Lab Instructor to join our dynamic team and embark on a rewarding career journeyLab Preparation: Setting up and preparing laboratory equipment, materials, and experiments before the students arrive.Demonstrations: Conducting demonstrations to show students how to perform experiments correctly and safely.Instructions: Providing clear and concise instructions to students on the objectives of the experiment, procedures to follow, and safety precautions.Guidance: Assisting students during the experiment, answering questions, and guiding them through the process.Safety Oversight: Ensuring that students adhere to safety protocols and guidelines while working in the lab.Troubleshooting: Helping students troubleshoot and resolve issues or challenges they encounter during the experiment.Data Collection: Assisting students in collecting accurate and reliable data during the experiment.Data Analysis: Supporting students in analyzing and interpreting the results of their experiments.

Job Description Summary Verification & Validation Engineer, will be responsible for the delivery of the of HVDC Controls & Protection Verification and Validation team’s activities on time / as per Project Scheduled through proper coordination between Project and department. The role involves technical understanding of the various work packages within the department ensuring that they meet the requirements, and the relevant processes are followed. Job Description Essential responsibilities: Design, create Factory System Test (FST) cases and review results against design requirements including leading Factory Acceptance Tests (FAT) with clients. Developing HVDC System and plant modelling in electromagnetic transient tools like PSCAD, RSCAD, EMTP-RV etc including undertaking Dynamic Performance Studies and Protection co-ordination. Preparing control system requirements for the RTDS Lab setup including AC DC interface requirement, Plant Emulator Interface requirement and RSCAD Power system network conversion, modelling, and verification. Support New Product Introduction (NPI) to develop existing and new products and tools. Provide support to Commissioning Engineers during Dynamic commissioning at Site. Support continual improvement, raising the effectiveness and efficiency of the team through the introduction of tools, methods and process improvements and coordinating with the Continuous Improvement leaders. Must be flexible with working hours and willing to travel in order to support projects globally for extended period. Qualifications And Requirements Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in HVDC business for 3+ years. Experience in the position of Verification Engineer in High Voltage field, with experience as a Control & Protection design Engineer. Good knowledge of overall 400kV substation, HVDC system (LCC/VSC/SVC) including control and protection system is essential. Experience of developing and working with PSCAD and RSCAD models is essential including knowledge of Overall HVDC System Operational Behaviour. Experience in technical leadership with ability to manage team of validation engineers Strong communication skills with a fluency in English language. Willingness to travel to support projects globally and readiness for flexible with working hours Knowledge of applicable electrical standards such as IEC 61850, IEC 62351, IEC 12207, IEEE 15288, IEC 25010, IEC 27032, NERC/CIP. Desired characteristics Process improvement or RCA experience or certification Experience on MATCAD, PSS/E and MATLAB SIMULINK, EMTP-RV, Digsilent etc will added advantage. Excellent communication and interpersonal skills Additional Information Relocation Assistance Provided: Yes

About Company Founded in 2011, ReNew, is one of the largest renewable energy companies globally, with a leadership position in India. Listed on Nasdaq under the ticker RNW, ReNew develops, builds, owns, and operates utility-scale wind energy projects, utility-scale solar energy projects, utility-scale firm power projects, and distributed solar energy projects. In addition to being a major independent power producer in India, ReNew is evolving to become an end-to-end decarbonization partner providing solutions in a just and inclusive manner in the areas of clean energy, green hydrogen, value-added energy offerings through digitalisation, storage, and carbon markets that increasingly are integral to addressing climate change. With a total capacity of more than 13.4 GW (including projects in pipeline), ReNew’s solar and wind energy projects are spread across 150+ sites, with a presence spanning 18 states in India, contributing to 1.9 % of India’s power capacity. Consequently, this has helped to avoid 0.5% of India’s total carbon emissions and 1.1% India’s total power sector emissions. In the over 10 years of its operation, ReNew has generated almost 1.3 lakh jobs, directly and indirectly. ReNew has achieved market leadership in the Indian renewable energy industry against the backdrop of the Government of India’s policies to promote growth of this sector. ReNew’s current group of stockholders contains several marquee investors including CPP Investments, Abu Dhabi Investment Authority, Goldman Sachs, GEF SACEF and JERA. Its mission is to play a pivotal role in meeting India’s growing energy needs in an efficient, sustainable, and socially responsible manner. ReNew stands committed to providing clean, safe, affordable, and sustainable energy for all and has been at the forefront of leading climate action in India. Job Description Position Title - Manager - Power Systems Studies Experience - 5-8 years Qualification - Post Graduation - Electrical Engineering Location - Gurugram Job Purpose An Electrical Engineer with post graduate/Doctorate qualification in Power system or equivalent with 5-8 years of experience in conducting Power system simulation studies for Electrical Balance of plant systems. Should have fair understanding in systems pertaining to Sub-station (up to 400 KV), SCADA/DCS/SAS, Switching stations, and related transmission lines. Roles and Responsibilities Detailed engineering: Electrical Balance of plant pertaining to Sub-station (up to 400 KV), Switching stations, and related transmission lines, from concept till commissioning of wind farm, which shall also involve Developing models of renewable energy/ Utility transmission & distribution network on power system simulation software, which shall also include Performing studies such as Relay Coordination, Insulation Coordination, Arc Flash Studies etc for stability of Plant through ETAP. Python scripting for PSS/E simulation automation. Performing Grid code compliance studies (Steady state, Power quality & Dynamic studies) for integration of renewable energy to the Grid through PSS-E. Knowledge of PSCAD & EMT studies would be an added advantage. Knowledge on PPC & designing control logic along with system architecture is added advantage Basic idea about substation engineering including various schemes for voltage level up-to 400/220kV level. Familiar to Design calculations/ Electrical Equipment sizing calculations and various Electrical layouts. Preparing technical report for the studies conducted. Knowledge on regulatory requirements put forth by CEA will be an added advantage. Knowledge of Software tools- ETAP(Expert), PSS/E(Intermediate) and PSCAD (Intermediate) AutoCAD, MS-office etc. Python Profile & Eligible Criteria BE/B Tech in electrical engineering from recognized institution with 5-8 yrs. post qualification experience. Candidates with masters in power systems or equivalent would be preferred. Experience on the balance of plant of wind renewable sector OR from the solar / hydro sector OR from the EPC companies who deliver services to the renewable sector/those who are into energy/ power sector. Strong communication & presentation skills.

Job Description Summary Verification & Validation Engineer, will be responsible for the delivery of the of HVDC Controls & Protection Verification and Validation team’s activities on time / as per Project Scheduled through proper coordination between Project and department. The role involves technical understanding of the various work packages within the department ensuring that they meet the requirements, and the relevant processes are followed. Job Description Essential responsibilities: Design, create Factory System Test (FST) cases and review results against design requirements including leading Factory Acceptance Tests (FAT) with clients. Developing HVDC System and plant modelling in electromagnetic transient tools like PSCAD, RSCAD, EMTP-RV etc including undertaking Dynamic Performance Studies and Protection co-ordination. Preparing control system requirements for the RTDS Lab setup including AC DC interface requirement, Plant Emulator Interface requirement and RSCAD Power system network conversion, modelling, and verification. Support New Product Introduction (NPI) to develop existing and new products and tools. Provide support to Commissioning Engineers during Dynamic commissioning at Site. Support continual improvement, raising the effectiveness and efficiency of the team through the introduction of tools, methods and process improvements and coordinating with the Continuous Improvement leaders. Must be flexible with working hours and willing to travel in order to support projects globally for extended period. Qualifications And Requirements Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in HVDC business for 3+ years. Experience in the position of Verification Engineer in High Voltage field, with experience as a Control & Protection design Engineer. Good knowledge of overall 400kV substation, HVDC system (LCC/VSC/SVC) including control and protection system is essential. Experience of developing and working with PSCAD and RSCAD models is essential including knowledge of Overall HVDC System Operational Behaviour. Experience in technical leadership with ability to manage team of validation engineers Strong communication skills with a fluency in English language. Willingness to travel to support projects globally and readiness for flexible with working hours Knowledge of applicable electrical standards such as IEC 61850, IEC 62351, IEC 12207, IEEE 15288, IEC 25010, IEC 27032, NERC/CIP. Desired characteristics Process improvement or RCA experience or certification Experience on MATCAD, PSS/E and MATLAB SIMULINK, EMTP-RV, Digsilent etc will added advantage. Excellent communication and interpersonal skills Additional Information Relocation Assistance Provided: Yes

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. What you will do At Volvo Construction Equipment Technology (China), Co., Ltd, you will contribute to the transformation of our company, the transport industry and society at large. You will: Design embedded software components for EXC/WLO machine control (C/C++ or Simulink based development) and HMI Android (Kotlin & Java) functions. Do relevant software test to secure software delivery quality. Responsible for machine level SW integration and software version management. Collaboration with global team to secure EE platform maintenance and literation. Support electronics component development engineer regarding software relevant requirements. Your future team JTC E&E team responsible for both Electrical and Electronics system development for different kinds of construction equipment (WLO, EXC, etc.), cover different function areas regarding harness design, components development, system development, software development and software V&V. Who are you? Do you dream big? We do too, and we are excited to grow together. In this role, you will bring: Main Tasks/ Responsibilities / Authorities: Embedded SW development Software version management. Software unit test/ integration test Android SW development Provide technical support to other teams for product improvement and new product development Support our testing activities in the evaluation of design solutions Key Skills: Software development languages (C/C++, Java, Kotlin, etc.) Process knowledge – Embedded SW life-cycle management Product knowledge – Electrical & Electronic System Simulink (for SW code-generation) Software test (code analysis / unit test) Competitive intelligence Communication skills – Coordination in between cross-functional team Knowledge of product cyber security Knowledge of product development processes Education/Professional Qualifications required for the position: MS in engineering or equivalent Broad interest in technology, especially within the area of heavy vehicles Strong intuitive and analytic ability to resolve problems Additional Important Requirements: English skill in both written and oral. Good communicative skills We value your data privacy and therefore do not accept applications via mail. Who we are and what we believe in We are committed to shaping the future landscape of efficient, safe, and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents across the group’s leading brands and entities. Applying to this job offers you the opportunity to join Volvo Group . Every day, you will be working with some of the sharpest and most creative brains in our field to be able to leave our society in better shape for the next generation. We are passionate about what we do, and we thrive on teamwork. We are almost 100,000 people united around the world by a culture of care, inclusiveness, and empowerment. Part of Volvo Group, Volvo Construction Equipment is a global company driven by our purpose to build the world we want to live in. Together we develop and deliver solutions for a cleaner, smarter, and more connected world. By unleashing everyone’s full potential, we build a more sustainable future for all our stakeholders. Come join our team and help us build a better tomorrow.

As an Data Engineer at IBM you will harness the power of data to unveil captivating stories and intricate patterns. You'll contribute to data gathering, storage, and both batch and real-time processing. Collaborating closely with diverse teams, you'll play an important role in deciding the most suitable data management systems and identifying the crucial data required for insightful analysis. As a Data Engineer, you'll tackle obstacles related to database integration and untangle complex, unstructured data sets. In this role, your responsibilities may include Implementing and validating predictive models as well as creating and maintain statistical models with a focus on big data, incorporating a variety of statistical and machine learning techniques Designing and implementing various enterprise search applications such as Elasticsearch and Splunk for client requirements Work in an Agile, collaborative environment, partnering with other scientists, engineers, consultants and database administrators of all backgrounds and disciplines to bring analytical rigor and statistical methods to the challenges of predicting behaviours’. Build teams or writing programs to cleanse and integrate data in an efficient and reusable manner, developing predictive or prescriptive models, and evaluating modelling results Required education Bachelor's Degree Preferred education Master's Degree Required technical and professional expertise Proof of Concept (POC) DevelopmentDevelop POCs to validate and showcase the feasibility and effectiveness of the proposed AI solutions. Help in showcasing the ability of Gen AI code assistant to refactor/rewrite and document code from one language to another Document solution architectures, design decisions, implementation details, and lessons learned. Stay up to date with the latest trends and advancements in AI, foundation models, and large language models. Evaluate emerging technologies, tools, and frameworks to assess their potential impact on solution design and implementation Preferred technical and professional experience Experience and working knowledge in COBOL & JAVA would be preferred Having experience in Code generation, code matching & code translation leveraging LLM capabilities would be a Big plus Demonstrate a growth mindset to understand clients' business processes and challenges

As an Data Engineer at IBM you will harness the power of data to unveil captivating stories and intricate patterns. You'll contribute to data gathering, storage, and both batch and real-time processing. Collaborating closely with diverse teams, you'll play an important role in deciding the most suitable data management systems and identifying the crucial data required for insightful analysis. As a Data Engineer, you'll tackle obstacles related to database integration and untangle complex, unstructured data sets. In this role, your responsibilities may include Implementing and validating predictive models as well as creating and maintain statistical models with a focus on big data, incorporating a variety of statistical and machine learning techniques Designing and implementing various enterprise search applications such as Elasticsearch and Splunk for client requirements Work in an Agile, collaborative environment, partnering with other scientists, engineers, consultants and database administrators of all backgrounds and disciplines to bring analytical rigor and statistical methods to the challenges of predicting behaviours. Build teams or writing programs to cleanse and integrate data in an efficient and reusable manner, developing predictive or prescriptive models, and evaluating modelling results Required education Bachelor's Degree Preferred education Master's Degree Required technical and professional expertise Proof of Concept (POC) DevelopmentDevelop POCs to validate and showcase the feasibility and effectiveness of the proposed AI solutions. Help in showcasing the ability of Gen AI code assistant to refactor/rewrite and document code from one language to another Document solution architectures, design decisions, implementation details, and lessons learned. Stay up to date with the latest trends and advancements in AI, foundation models, and large language models. Evaluate emerging technologies, tools, and frameworks to assess their potential impact on solution design and implementation Preferred technical and professional experience Experience and working knowledge in COBOL & JAVA would be preferred Having experience in Code generation, code matching & code translation leveraging LLM capabilities would be a Big plus Demonstrate a growth mindset to understand clients' business processes and challenges

Senior Software Developer (f/m/d) Identifier: INST-SSD-TL Location: Trivandrum For our office in Trivandrum, dSPACE is looking for creative and motivated professionals. You will work on exciting and technologically cutting-edge product development projects, in the areas of control prototyping, code generation and Hardware-In-the-Loop (HIL) simulation. We are currently offering a position as a Senior Software Developer for the development of a product solution that operates within a model-based development environment using MATLAB, Simulink, and Stateflow. As part of the development team, you will be responsible for the development and maintenance of Processor-in-the-Loop (PIL) functionality, which enables the early validation of software components on the processor that will later be used in the ECU. You will also be responsible for developing and maintaining the necessary firmware to integrate new components as part of the PIL functionality. In doing so, you can expect a variety of exciting, challenging, and diverse tasks that you will solve together as a team. Your future colleagues are looking forward to working with you on a wide range of challenging subjects. During the induction period, your colleagues will support you to familiarize you with our products and tasks. Your Tasks You develop and enhance software components within an experienced development team You coordinate new functionalities with stakeholders You analyze microcontroller hardware with the supported compiler to realize the PIL functionality You develop and maintain flash drivers and application interfaces to support PIL Simulation You take ownership of features, independently implement new functionalities, and guide the team in solving complex problems Your Qualifications You have a B.Tech/M.Tech university degree in Computer Science, Electronics and Communication or Electrical and Electronics Engineering, with a minimum of 5 years of relevant experience You are eager to learn and open-minded You have strong proficiency in C and C++, along with experience in Makefile script development You possess deep working knowledge of embedded systems, various microcontroller platforms, and compilers You have strong experience with MATLAB and Simulink You have good experience with testing methodologies for PIL Simulation framework or similar embedded validation environments You are familiar with Azure DevOps and Git for version control and CI/CD workflows You have excellent English communication skills, both written and verbal What We Offer A crucial role in a young, dynamic, and fast-growing team A work environment that fosters trust, respect, and feedback An onboarding buddy to integrate you smoothly into our team Productivity and improvement time between the development sprints A mentor helping you with your personal goals, technical progress in general and your software engineering skills in particular About us dSPACE is a market innovator and leader in providing solutions and systems for embedded controller software development in Automotive, Aerospace and Manufacturing industries. Founded in Germany in 1988, dSPACE employs over 2,600 dedicated people worldwide, who are committed to making the embedded controls software development process more efficient through innovative tools and services. Working at dSPACE means taking on challenging and varied tasks in a promising and exciting industry. With us, you have responsibility and can shape your personal career. A collegial and cooperative approach is as natural for us as the continuous development of your expertise. If you are ready to join our highly successful international team and take on the challenge of creating yet another success story in India send us your application (including motivational letter, CV, copies of your academic degree, references from former employers) at career.tvm@dspace.in indicating your earliest possible entry date.

REQUIRED SKILLS : 1. Required: GitHub and GitHub Actions Knowledge 2. Required: DevOps concepts and tools, to participate in MBD CI solutions with MathWorks, IT, DevOps Architects. 3. Required: MathWorks Ecosystem Knowledge: o Matlab Scripting, Parallel Toolbox, Simulink, Simulink Test, Embedded Coder, Other related tools

Job Requirements Seeking a test automation engineer proficient in scripting using Python. Developing automated test scripts to verify various functionalities, such as hardware interfaces, communication protocols, and software components. Experience in managing automated testing environments for embedded systems, preferably in the transportation rail industry, ensuring the dependability and effectiveness of critical systems. Creating automated test scripts and frameworks for functional, regression, and performance testing of embedded systems using Python. Setting up and supervising HIL simulators, handling I/O configuration, signal routing, and seamless integration with the overall test environment desired. Developing detailed test scenarios and test cases in line with specific system requirements, conducting thorough tests in the HIL environment, and carefully analyzing test results to guarantee optimal performance and compliance with safety standards. Work Experience C++, Python, Shell scripting Ability to read Schematics Familiarity with MATLAB / Simulink, LabVIEW would be an advantage OS : Linux working environment

About Sarla Aviation: Sarla Aviation is at the forefront of revolutionizing urban air mobility with its cutting-edge eVTOL (electric Vertical Take-off and Landing) aircraft featuring innovative tilt-rotor technology. Sarla Aviation, a pioneer in the development of sustainable, efficient, and safe air transportation systems, is dedicated to influencing the future of aviation. We are seeking a skilled and driven Electric Propulsion Motor Architect to join our expanding team and contribute to the success of our eVTOL program. About the role: As a Software Engineer - Test Systems Development , you ll play a vital role in building the software that powers our real-time test environments. Working at the intersection of software and hardware, you ll help create robust, automated test systems that validate mission-critical components. You won t just be writing test scripts; you ll be contributing to how we verify entire systems. Your work will support safety, performance, and compliance in environments where precision matters. If youre detail-oriented, curious, and excited by system-level thinking, we d love to hear from you. Key Responsibilities: Assist in the development of test automation software using C, C++, Python and Matlab. Contribute to setting up and maintaining Linux-based real-time environments for test systems. Support integration of software with test hardware including sensors, DAQs, communication interfaces, and avionics protocols. Work with cross-department engineers to implement test scripts, tools, and automated procedures for system verification. Participate in debugging and troubleshooting of hardware/software issues in test environments. Help document software, test procedures, and results in accordance with company and regulatory standards. Collaborate with hardware, systems, and quality teams during the product development and validation cycle. Required Qualifications: Bachelors degree in Computer Science, Electrical Engineering, or a related field. 2-3 years of experience in software development. Proficiency in C, C++, Python programming and MATLAB/Simulink. Familiarity with Linux operating systems; exposure to real-time Linux is a plus. Understanding of software-hardware integration and common protocols (e.g., UART, I2C, SPI). Strong problem-solving skills, willingness to learn, and attention to detail. Good communication and documentation abilities. Preferred Qualifications: Exposure to real-time operating systems (RTOS) or real-time Linux frameworks (e.g., PREEMPT-RT). Coursework or projects involving embedded systems, test automation, or control systems. Familiarity with avionics protocols (e.g., ARINC 429, MIL-STD-1553, CAN) is a plus. Familiarity with certification standard (e.g., DO-178C, DO-254, DO-164 etc.) Experience using workbench development tools like LabVIEW etc, Experience using version control tools such as Git. Why Join Us? Be a part of a world-class team in an environment where your work directly contributes to shaping the future of urban air mobility. Thrive in our culture of diversity, inclusion, and innovation, where your unique perspectives and ideas are valued. Enjoy a competitive compensation package, with opportunities for growth and development in a rapidly evolving industry. How to Apply: Submit your resume through our website www.sarla-aviation.com or via the job post and join us in our journey to redefine aerospace with safety, integrity, and groundbreaking innovation at its core. Sarla Aviation is dedicated to creating a diverse and inclusive workspace, championing equality and empowering every individual. We believe that our strength lies in our differences, not just our similarities. Therefore, we warmly welcome applications from all qualified candidates, regardless of their ethnicity, gender, disability, religion, sexual orientation, or age. Join us at Sarla Aviation, where your unique background and perspective are not just welcomed they are celebrated.

Job descriptions may display in multiple languages based on your language selection. What we offer: Group Summary: Job Responsibilities: Job Introduction The Software & HIL Test Engineer is responsible for the design and development of validation documentation, software, SIL models, HIL models, test scripts and components. Working from broad specifications, the engineer not only performs, but is responsible for guiding engineering activities. As an entry level engineer, you will support a team that develops and validates drive systems for future electric and hybrid vehicles as well as other electric drives in motor vehicles. The engineer will work independently to perform a variety of basic engineering assignments with varied responsibility but may require some guidance and direction from a senior engineer/mentor or manager. Major Responsibilities Analysing requirements, developing/automating Test cases and conducting tests on Hardware in the Loop (HiL) systems for the software of Powertrain systems Performing software integration test and qualification tests on the HiL system Debugging and log analysis Documentation and reporting- Create documentation related to test cases, test reports, best practices and lessons learnt, issues reporting. Contribute to continuous improvement, share knowledge and support to team. Supporting, setting up, and modifying HiL systems - HiL infra Designing, Simulation and maintaining the test environment - HiL infra Knowledge and Education Bachelor of Science in Engineering required. Work Experience: 2 to 4 years of relevant professional experience in the automotive industry as a software tester Skills and Competencies Understanding of Powertrain- eDrive systems, Transfer Case Strong programming skills preferably in Python, CAPL or m-script Knowledge of Matlab/Simulink, experience with dSpace systems 3+ years Test automation tools such as vTestStudio, ECU-Test(added advantage) Experience with Requirements tools - DOORS, DOORS NG, IBM JAZZ, PTC, Source control- SVN, GitHub(added advantage) Experience on Debuggers(Lauterbach), flashing tools- vFlash, DiagRA Experience with Vector Tools (CANalyzer, CANoe, CANape, CANoe.DiVa) UDS/OBD protocol testing, experience with GM CG testing is a plus. Ideally, familiarity with Functional Safety (ISO26262), Cybersecurity, ASPICE and Software Testing ISTQB Foundation Level Knowledge on different Microcontroller devices, SW architectures(AUTOSAR). Knowledge on Bootloader concepts. Work Environment Regular overnight travel: For dedicated and motivated employees, we offer an interesting and diversified job within a dynamic global team together with the individual and functional development in a professional environment of a global acting business. Fair treatment and a sense of responsibility towards employees are the principle of the Magna culture. We strive to offer an inspiring and motivating work environment. Additional Information We offer attractive benefits (e.g. employee profit participation program) and a salary which is in line with market conditions depending on your skills and experience. Awareness, Unity, Empowerment: At Magna, we believe that a diverse workforce is critical to our success. That s why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email or traditional mail to comply with GDPR requirements and your local Data Privacy Law. Worker Type: Regular / Permanent Group: Magna Powertrain

Job descriptions may display in multiple languages based on your language selection. What we offer: Group Summary: Job Responsibilities: Job Introduction The Software & HIL Test Engineer is responsible for the design and development of validation documentation, software, SIL models, HIL models, test scripts and components. Working from broad specifications, the engineer not only performs, but is responsible for guiding engineering activities. As an entry level engineer, you will support a team that develops and validates drive systems for future electric and hybrid vehicles as well as other electric drives in motor vehicles. The engineer will work independently to perform a variety of basic engineering assignments with varied responsibility but may require some guidance and direction from a senior engineer/mentor or manager. Major Responsibilities Analysing requirements, developing/automating Test cases and conducting tests on Hardware in the Loop (HiL) systems for the software of Powertrain systems Performing software integration test and qualification tests on the HiL system Debugging and log analysis Documentation and reporting- Create documentation related to test cases, test reports, best practices and lessons learnt, issues reporting. Contribute to continuous improvement, share knowledge and support to team. Supporting, setting up, and modifying HiL systems - HiL infra Designing, Simulation and maintaining the test environment - HiL infra Knowledge and Education Bachelor of Science in Engineering required. Work Experience: 4+ years of relevant professional experience in the automotive industry as a software tester Skills and Competencies Understanding of Powertrain- eDrive systems, Transfer Case Strong programming skills preferably in Python, CAPL or m-script Knowledge of Matlab/Simulink, experience with dSpace systems 3+ years Test automation tools such as vTestStudio, ECU-Test(added advantage) Experience with Requirements tools - DOORS, DOORS NG, IBM JAZZ, PTC, Source control- SVN, GitHub(added advantage) Experience on Debuggers(Lauterbach), flashing tools- vFlash, DiagRA Experience with Vector Tools (CANalyzer, CANoe, CANape, CANoe.DiVa) UDS/OBD protocol testing, experience with GM CG testing is a plus. Ideally, familiarity with Functional Safety (ISO26262), Cybersecurity, ASPICE and Software Testing ISTQB Foundation Level Knowledge on different Microcontroller devices, SW architectures(AUTOSAR). Knowledge on Bootloader concepts. Work Environment Regular overnight travel: For dedicated and motivated employees, we offer an interesting and diversified job within a dynamic global team together with the individual and functional development in a professional environment of a global acting business. Fair treatment and a sense of responsibility towards employees are the principle of the Magna culture. We strive to offer an inspiring and motivating work environment. Additional Information We offer attractive benefits (e.g. employee profit participation program) and a salary which is in line with market conditions depending on your skills and experience. Awareness, Unity, Empowerment: At Magna, we believe that a diverse workforce is critical to our success. That s why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email or traditional mail to comply with GDPR requirements and your local Data Privacy Law. Worker Type: Regular / Permanent Group: Magna Powertrain

Key Accountabilities Design and develop power electronics productso Design calculation and optimization of power electronics converterso Control design including mathematical modelling, physical models, ac sweep, hardware frequency response extractiono Topology selection for different AC-DC, DC-DC and DC-AC conversion including Buck, Boost, Flyback, Forward, Half & full-bridge, DAB converter, LLC resonance converters, high power 3-Level NPC Inverters and 3-Level DC-DC converters for high-power high-density EV charging applications o Device selection, loss-estimation, thermal design consideration (physical layout, heat-sink sizing, cooling methods & arrangements)o Design of Magnetic components; Inductors, line filters, high and low frequency transformers for DC-DC and DC-AC power converters, coupled inductors for circulating currents and EMI/EMC applications Provide technical expertise and leadership into the development of future Power Electronics technologies and products for different Rolls-Royce businesses Advance knowledge of power electronic magnetics design eg High frequency power inductor designs, EMI/EMC filters, dv/dt filters, sine filters, transformers etc Advance the knowledge of the integration of Power Electronics Converters with associated components/subsystems eg electrical machines, power network, energy storage systems with the goal of optimizing overall system performance in relation to the specifics of the applications Maintain a good understanding of state-of-the-art in power converter component technologies with emphasis on advance magnetic materials, Actively work with suppliers to acquire these technologies as required Develop component, subsystem and system level models in order to enhance the teams ability to accelerate design, development and testing activities Assisting in PCB layout design and routing of high frequency 100-300 kHz power converters / inverters with improved EMI/EMC performances/compatibility Co-ordinate strategic collaboration with key research partners in R&D initiatives Lead internal and external research programs to ensure business opportunities are pursued and the Group's R&D requirements are satisfied Maintain good customer and stakeholder engagement throughout the project cycle Support the achievement of department objectives aligned with global objectives Qualifications & Experience BS/MS/PhD degree in Electrical Engineering Candidates with significant industrial and technology commercialization experience will be preferred 5 - 10 years of experience in power electronics product developments Experience in commercial product development lifecycle ie from concept to final product Strong technical knowledge of:o Magnetic materials and high frequency designs for power electronics (eg > 100kW)o Experience on EMI/EMC designs for power electronic productso power electronics converter topologies (DC/AC and DC/DC) and power semiconductor devices which are applicable for high voltage and high-power application Gate driver design, embedded systems design (controller) and magnetic designso Component layouts and smart packaging of power converter system Thermal management of Power converters Hands on experience in design of PCBs including schematics and multi-layer PCBs for micro-controller and interfaces Hands on experience ino Software tools: MATLAB/Simulink, PSIM, PLECS, ANSYS, LTspice, Proteus, Altium, OrCADo Hardware Tools: Tektronix TDS2024, Tektronix DPO3034 Digital storage Oscilloscope, Tektronix MSO4034 Mixed signal Oscilloscope Tektronix AFG3022 Digital dual channel function generator 25Mhz, Fluke 87 V, Fluke 115 True RMS Multimeter, Fluke 17B+, HP 4261A LCR meter, Tektronix P5200, P5210 HV differential probes, high voltage tester (DC & pulse), Simulation tools for wireless chargers Experience in solving noise problems in ultra-high switching frequency converters and ability to design of EMI/EMC filters to meet stringent requirement It should be supported by good understanding of converter layout and component placement in converters Experience in modelling and time domain simulation software for power converter design Familiarity with FEM simulation tools to optimize power converter design Preferred experience with MATLAB/ Simulink/ HDL coder for model-based design Ability to work with components and solution suppliers to meet the system requirements is a must The candidate should have a strong vendor and supplier database Experience in the development of commercial high-power and high-voltage power electronics converters for electric drives, power supplies and power conditioners Experience as technical lead to develop high performance power electronic converter to fulfil requisite standards (eg aerospace standards) Undertake test rig design for these converters and associated commissioning Knowledge of potential issues when integrating power electronics converter into distribution system with various energy storages and sources/loads Familiarity with different industrial standards for electrical system is an essential and knowledge/exposure of aerospace and marine standards will be advantageous Experience in working in multi-domain team (Electrical, Mechanical, Control and Thermal) In general, you should have broad interests across engineering disciplines and a sound understanding of interactions with other engineering disciplines Ability to work effectively in a multidisciplinary, global team environment Effective oral and written communication skills An ability to achieve targets while working on multiple projects simultaneously An ability to monitor social, industrial and academic developments of technology and develop technology development plans

Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Automotive ECU Software Good to have skills : NAMinimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Software Development Lead, you will be responsible for developing and configuring software systems, either end-to-end or for specific stages of the product lifecycle. Your typical day will involve collaborating with various teams to ensure the successful implementation of software solutions, applying your knowledge of technologies and methodologies to support project goals and client needs. You will engage in problem-solving activities, guiding your team through challenges while ensuring adherence to best practices and project timelines. Your role will also include mentoring team members and fostering a collaborative environment to drive innovation and efficiency in software development. Roles & Responsibilities:- Expected to be an SME.- Collaborate and manage the team to perform.- Responsible for team decisions.- Engage with multiple teams and contribute on key decisions.- Provide solutions to problems for their immediate team and across multiple teams.- Facilitate knowledge sharing sessions to enhance team capabilities.- Monitor project progress and ensure alignment with strategic objectives. Professional & Technical Skills: - Must To Have Skills: Proficiency in Automotive ECU Software.- Strong understanding of embedded systems and real-time operating systems.- Experience with software development methodologies such as Agile and Waterfall.- Familiarity with automotive communication protocols like CAN, LIN, and Ethernet.- Ability to troubleshoot and debug complex software issues. Additional Information:- The candidate should have minimum 5 years of experience in Automotive ECU Software.- This position is based in Hyderabad.- A 15 years full time education is required. Qualification 15 years full time education

Designation : Engineer / Sr. Engineer - End-of-Line Tester Development Educational Qualification : B.Tech/B.E. /M.Tech in Electronics & Communication, Electrical, Instrumentation, Mechatronics, or Computer Science Engineering. Technical Skills Required : 1. Design and implement data-driven applications using Python, MySQL, Power BI, Excel, and JavaScript to support real-time decision-making and enhance process efficiency. 2. Develop and simulate control system models using MATLAB/Simulink for system validation, optimization, and predictive algorithm deployment. 3. Program, integrate, and test industrial control systems using CODESYS, ensuring robust and reliable performance in automated manufacturing environments. 4. Contribute to the development and testing of MEMS sensor-based systems for industrial applications. 5. Collaborate on computer vision and IIoT projects to enhance machine intelligence and smart factory capabilities (Industry 4.0). 6. Ensure adherence to industry standards (ISO 9000/14000/18000, SIL, ANSI, ATEX, IEC 61131-3, NFPA). 7. Conduct rigorous sensor testing and validation, and support integration with RTOS and real-time communication protocols. 8. Maintain technical documentation and actively contribute to innovation and research initiatives. Additional Desirable Skills : Familiarity with ISO & IPC standards for electrical testing Ability to work with mechanical fixtures and robotic arms for automated testing. Experience with machine learning for predictive analytics (preferred but not mandatory). Strong problem-solving skills and ability to work independently. · Programming: Python, OOPs, Node-RED, NumPy, Pandas, Matplotlib, OpenCV, Seaborn, JavaScript Tools & Platforms: MySQL, Power BI, MATLAB Simulink, LabVIEW, CODESYS, Excel Technical Expertise: Sensor Testing & Validation, RTOS, IIOT, Instrumentation & Control, Drives & Controls Industry Standards: ISO 9000/14000/18000, SIL, ANSI, ATEX, IEC 61131-3, NFPA Communication Protocols: I2C, SPI, UART, SERCOS, Profibus, Profinet, Ethernet, Modbus, Fieldbus, OPC UA. Experience Required : 3-7 years in designing and developing automated test systems for electrical/electronic components. Hands-on experience in building EOL testers for products like switches, connectors, relays, and wire harnesses. Experience in working with DAQ systems and real-time monitoring applications. Practical exposure to industrial automation & quality control testing. Job Types: Full-time, Permanent Pay: ₹22,000.00 - ₹40,000.00 per month Benefits: Health insurance Leave encashment Schedule: Fixed shift Supplemental Pay: Yearly bonus Work Location: In person

Career Area: Engineering : Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you'rejoining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don'tjust talk about progress and innovation here we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. As an Engineer for E+ES India team, you will have opportunities to contribute on complex projects via Simulation, Development and Validation of complex electrical systems pertaining to battery management and battery chemistry. This will involve creating world class control software and evaluating software features using HIL benches. This role directly impacts Caterpillars current and future Battery and microgrid products being developed in an R&D environment. Job Duties/Responsibilities may include, but are not limited to: Define battery control strategy requirements and develop software features using tools like Matlab/Simulink/Simscape Develop test plans from software requirements and specifications Perform Black box testing and White box testing using simulators like Opal-RT, dSPACE, etc Run and execute battery test plans in battery cell simulators and HIL benches Modify and convert battery simulation models using MATLAB/Simulink tools for HIL Bench Develop automation scripts using Python and other tools Perform complex analysis, identify, and solve challenging battery controls software problems Lead new capabilities / projects to enhance the BMS controls and validation Basic Qualifications: Bachelors degree in Electrical/Electronic/ Mechanical Engineering 8 to 12 years experience with HIL testing, battery controls validation or modelling Experience in debugging and running test cases on Battery cell simulators and other HIL simulators Experience in plant model integration using tools like Matlab/Simulink, RT-Sim, Vector Canape, etc Experience and knowledge with Controls SW development and Validation Top Candidates Will Also Have: Experience and knowledge with Battery Management control system and battery software validation using HIL Benches Masters degree in an accredited Indian or Global Engineering schools Good knowledge of simulation tools like Simscape electrical etc Good knowledge on Software testing and scripting tools like Canalyzer, Python, etc Excellent analytical and communication skills Self-starter with strong technical leadership skills Enjoys working in a fast paced, technically challenging environment Posting Dates: July 2, 2025 - July 17, 2025 Caterpillar is an Equal Opportunity Employer. Not ready to applyJoin our Talent Community.

Company Description Complus Systems Pvt. Ltd. is the industry leader in India for delivering comprehensive EMI/EMC Testing solutions. We serve diverse sectors including Military, Automotive, Medical, Telecom, and Industrial Electronics with state-of-the-art facilities. We also offer Earthquake monitoring solutions and recently launched Complus Lab to provide testing and calibration services. Complus Systems excels in ensuring compliance with various industry standards through our innovative solutions. Job Title: Senior Engineer - EV & Charger Technologies Location: Bengaluru Job Type: [Full-time/Contract] About the Role: We are seeking a skilled and experienced Senior Engineer to lead the development, integration, and testing of Electric Vehicle (EV) systems and EV charging solutions. This role involves driving innovative projects in the fast-growing EV and charging infrastructure domain, ensuring our offerings meet industry standards, safety requirements, and customer expectations. Key Responsibilities: Lead the design, development, and validation of electric vehicle systems, and charging hardware/software. Develop and optimize EV charging systems, including AC/DC chargers, fast chargers, and wireless charging solutions. Conduct system simulations, performance analysis, and fault diagnosis to ensure product reliability and efficiency. Oversee prototype assembly, testing, and field validation activities, ensuring compliance with relevant international safety and quality standards (ISO 26262, IEC 61851, UL standards, etc.). Collaborate with cross-disciplinary teams, including R&D, Manufacturing, and Quality, to deliver integrated EV and charging solutions. Stay abreast of emerging technologies, industry standards, and regulations in EV and charging infrastructure sectors, implementing best practices. Troubleshoot technical challenges during design, testing, and field deployment, providing innovative solutions. Maintain detailed documentation of designs, test procedures, and validation reports. Mentor junior engineers and coordinate with external suppliers and partners for component procurement and testing. Qualifications & Skills: Bachelor’s or Master’s degree in Electrical Engineering, Electronics, Mechatronics, or a related discipline. 4+ years of experience in EV technology development, battery systems, power electronics, or EV charging infrastructure. Strong knowledge of EV architectures, charging standards (IEC 61851, CCS, CHAdeMO, etc.), and safety requirements. Proficiency with simulation tools like MATLAB/Simulink, PSpice, or similar; experience with embedded systems programming preferred. Familiarity with test equipment, diagnostic tools, and validation methodologies for EV and charger systems. Excellent troubleshooting, problem-solving, and project management skills. Effective communication and teamwork abilities in a multidisciplinary environment. Preferred Qualifications: Experience with fast charging solutions, wireless charging, or high-power electronics. Knowledge of automotive safety standards (ISO 26262, UL 1998). Past involvement in commercial EV/EV charger projects, prototypes, or pilot deployments. Why Join Us: Join a pioneering company at the forefront of EV and charging technology innovation. Contribute to shaping the sustainable transportation future while working on cutting-edge projects, with opportunities for growth and professional development

Job Role- (Firmware developer Control system) Required Skills & Experience 7+ years proven experience developing Power Electronics products Architecting embedded control strategy, formulating specifications and implementation control firmware for PFC, Chargers, DC/DC, and inverter. Board bring up experience, Device driver development for CAN, I2C, SPI etc. Participating and leading the specification, design reviews and executing unit tests. Proves design concepts through a combination of computer simulation and physical laboratory implementation/testing. Knowledge in Control system design/ Modeling/simulation in MATLAB / Simulink or other similar tools Writing lean code for real time interrupt driven applications. Proficient in understanding the schematics and debugging hardware issues. Experience in developing digital control systems for Power inverters/Converters. Develops automated test cases for Hardware-In-Loop modeling/Testing. Knowledge on charger profile VRLA, Li-Ion. Develops engineering models and test plans to verify electrical, environmental, and functional compliance of the design to its specification Remains abreast of the latest technology in Digital control/Controllers. Programming experience in C and C++ for 32-bit controllers/DSPs. Debugging skills, RCA, SDLC. Code version control: GIT, SVN. Should have capability to handle projects and guide the team. Good interpersonal communication skills and experience in working with global teams. Preferable Skills: Programming experience in RTOS environments like UC OS-II or other platforms. Knowledge in Python scripting language. Understanding on Safety regulatory requirements in power converters. Experience is FPGA programming and Simulation techniques. Knowledge in JAMA, Confluence.

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivity Ltd. is a $14 billion global technology and manufacturing leader creating a safer, sustainable, productive, and connected future. For more than 75 years, our connectivity and sensor solutions, proven in the harshest environments, have enabled advancements in transportation, industrial applications, medical technology, energy, data communications, and the home. With 80,000 employees, including more than 8,000 engineers, working alongside customers in approximately 140 countries, TE ensures that EVERY CONNECTION COUNTS. Learn more at www.te.com Designs a complete and complex Simulation framework, system, or product. Define simulationprocesses for technical platforms, system specifications, input/output and working parameters for hardware and/or software compatibility. Conceives system interfaces and business application prototypes. Identifies, analyzes and resolves system design weaknesses. Influences the shaping of future products by contributing to the framework (architecture) used across multiple products or systems. Roles and Responsibilities: ROLE OBJECTIVE To perform FEA tasks and provide suitable design recommendations to validate the design virtually RESPONSIBILITIES Validate concept designs using simulation techniques and determine design robustness, critical to function requirements. Deploy FEA Techniques implicit and explicit approach, using Software tools like Ansys Work Bench , LSDyna, Hypermesh, Simufact, Digimat etc Translate actual problem to Finite Element Analysis (FEA) model, interpret analysis results and select best solution which includes linear & non-linear analysis under different physics. Monitor and evaluate simulation software capabilities and industry trends. Deploy standardized process and work methodology. Train and develop capability of the team to be a mutli-skilled resource pool. Benchmark implement productivity improvement methods. Track monitor metrics for sustained performance covering quality & delivery. Collaborate with design & validation teams to enhance the design optimization. Understanding the influence/impact of my activities on financial decision. Education and Experiences: EDUCATION/KNOWLEDGE BE/ B.Tech (Mechanical/Electrical) M Tech (Mechanical/Electrical) (preferred) Knowledge of product, design processes and methodology. Proficiency in state-of-the-art o FEA- ANSYS WORKBENCH, LS-DYNA, HYPERMESH, SIMUFACT, MOLDEX3D, OPTISLANG, ICEPAK MAXWELL, Ansys HFSS System simulations such as MATLAB & SIMULINK. o CAD tools- PTC Creo, Space Claim. o Programming language - Python, Microsoft VB-script, Power IB. Proficiency in use of MS Office tools. Knowledge of associated manufacturing processes (molding, stamping, plating, crimping & assy). Ability to understand specification for validation as per US CAR / LV 214 / Similar Specification. Knowledge about the crimping technologies, Ultrasonic welding technologies, Laser welding technologies. Knowledge on technical paper publications & applying for patents CRITICAL EXPERIENCE 8-12 years of industry experience. Expertise in Ansys Workbench. Experience on connector products (Plastic and Sheet Metal parts). Knowledge on material science (Metals, Resins & hyper elastic material) and implement for simulation. Correlation of Test and simulation data / results. Expertise on CAE tools, Optimization techniques, and testing methods. Implementing of LEAN / 6 Sigma / Kaizen techniques to live projects COMPETENCIES System and Product knowledgeThorough understanding of customer requirements, product and application needs, required for creating effective designs Market intelligenceA thorough understanding of market trends and technologies. Conceptual thinkingBeing able to see a broad picture, understand problems by putting the pieces together and simplify complex issues. Concern for order, quality, and accuracyAn underlying drive to reduce uncertainty by continuous risk assessments, taking accurate decisions, and continuously improve processes. Communication skillsFluent communication skills to be able to articulate well with customers and teams across different functions & locations. Internal stakeholder managementManage requests, address customer requirements and work effectively with different cross functional teams. Interpersonal skills and people managementSupervise and manage a team by ensuring compliance with rules and processes at TE and keep them motivated.

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview Designs a complete and complex Simulation framework, system, or product. Define simulationprocesses for technical platforms, system specifications, input/output and working parameters for hardware and/or software compatibility. Conceives system interfaces and business application prototypes. Identifies, analyzes and resolves system design weaknesses. Influences the shaping of future products by contributing to the framework (architecture) used across multiple products or systems. What your background should look like: Competencies

Job Description Summary As a Control & Protection Application Engineering Manager you will be leading Engineering team and working across two engineering disciplines. Solution and engineering centre in all aspects of HVDC Control & Protection system supports the design and implementation of HVDC Control & Protection Systems by analysing customer requirements assessing the necessary deviation from standard solutions and also provide technical solution that meets the project delivery and Tender objectives. This includes the following. - Developing organizational talent - Engineering process management - Provide technical guidance. - Drive consistent design practices and common global processes for projects. - Interface with customers Essential Responsibilities As a Control System Engineering Manager you will be responsible for leading a team that designs develops configuration and Verification of HVDC Control & Protection Systems drive consistent design practices common global processes for projects implementation and also provide technical solution that meets the project and Tender objectives. Development of PSCAD Network Model Control MATLAB application Model Control system block diagram ONM Manuals. MATLAB application unit and system integration testing. PSSE/PSCAD and PSSE/RSCAD Power system network conversion modelling and verification HVDC System in electromagnetic transient tools like PSCAD EMTP-RV etc. Plant modelling in various simulation tools (MATLAB RSCAD PSCAD etc) and its verification. Dynamic performance studies using both offline and online simulation tools Control parameters tuning to meet grid stability criteria specified in customer technical specifications. Algorithm and state machine development in MATLB Simulink Conversion of MATLB Simulink algorithms to other suitable time domain library models Execute and provide guidance for the analysis / evaluation of assigned projects that meet business standards practices and procedures and the product / program requirements Support improvements to existing algorithm/strategies for power fault recovery or instability issues during DPS studies Ensure that project plans contain the necessary activities and studies required to meet the requirements of the customer and the proposed technical solution. Responsible for recruiting coaching and/or developing organizational talent. Responsible for providing direction and/or guidance to exempt specialists and/or supervisory staff who exercise significant latitude and independence in their assignments. May supervise non-exempt employees. Manage the engineering resources workload schedule and project milestones. Play a key role in engineering design reviews and technical leadership identifying potential project risks and technical weaknesses and proposing safe reliable and compliant solutions. Works closely with internal and external customers to arrive at engineering specifications that optimise the commercial potential of new and existing products. Ensures that the available technologies and components are appropriately exploited in product design. Keeps the organizations vision and values at the forefront of decision making and action. Builds strategic partnerships to further departmental and organizational objectives. Develops and executes organizational and operational policies that affect one or more groups by utilizing technical/professional knowledge and skills. Define the project work breakdown structure (WBS) resources and skill levels required to meet the delivery timescales. Qualifications / Essential Requirements Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in HVDC business. More than 10 years experience in HVDC industry including HVDC station equipment and design Strong sense of urgency and ability to identify and manage team organisational risks Proven skills in managing and leading team with strong technical background Experienced in Protection & Control system design application and have strong problem-solving skills. Strong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs / projects. Ability to document plan market and execute programs. Established project management skills. Proven technical leadership in a complex system engineering development environment Proactively serves on cross functional leadership teams; Makes decisions independently; Pulls in experts when needed. Demonstrates track record of designing quality systems/components that exceed design reqs beat cost targets and exceed reliability targets Desired characteristics: Knowledge of applicable electrical standards such as IEC 61850 IEC 62351 IEC 12207 IEEE 15288 IEC 25010 IEC 27032 NERC/CIP Process improvement or RCA experience or certification Ability to define requirements and ensure they adhere to best practice Experienced in technical leadership Experience working in HVDC industry Experience in HVDC Protection is added advantage Relocation Assistance Provided: Yes

Job Description Summary Many employers promise the chance to make a difference at GE Vernova you can change the world. Bringing clean affordable power to the developing world decarbonizing the world electricity network helping to build the grid of the future powered by renewable energy u2026 theyre all part of our company strategy. If youre passionate about developing firmware and excited to tackle UN SDG-713 and Energy Transition challenges as well as motivated by the prospect of shaping the future of energy industry through innovation and new business models we encourage you to apply. Join us in our journey to redefine whats possible with AI and make a lasting impact on the world of Energy. We are seeking a dynamic forward-thinking and results-driven Lead Engineer Embedded SW Development who will be responsible for designing developing and testing Embedded Software (Firmware) platforms and systems that need to be tailored to the needs of the hardware that it controls and runs on. Typically requires a deep understanding of the characteristics of the physical device being controlled the functions it is expected to perform and the ability to design develop implement and test the logic and software required to realize the real-time functionality. Executes standard operational/technical tasks typically subject to instructions and work routines. Reporting to Senior Engineering manager the Lead Engineer Embedded SW Development will work in close collaboration with GA product lines R&D teams product management and other GA functions. As part of a multi-developer firmware team the major responsibilities will include analysis design implementation and testing of firmware for different product line. Job Description ESSENTIAL RESPONSIBILITIES: The Lead Engineer - Embedded SW Development will be responsible for: Design develop implement and debug embedded software and/or firmware features/set of features for a small module or a large component of entire embedded software product. Integrate software packages with existing systems and sub-systems. Prepare unit test and regression test specification packages and templates. Interact with a multi-discipline engineering team to meet the project requirements throughout its life cycle. Prepare formal and informal engineering documentation (e. g. Design documents code reviews Release reports etc. ). Engages in technical discussions; participates in technical designs and presents technical ideas through white boarding. Works closely with peers and keeps engaging in a fast pace technical design and development team. Executes in a fast-paced delivery mode and focuses in delivering tasks to meet the product release goal. Maintains code quality through best practices code reviews and unit testing. QUALIFICATIONS/ REQUIREMENTS : Bachelor degree in computer science Electrical Engineering or Electronics Engineering. A minimum of 5 years of embedded development experience in industrial setting. Proficient in Real-Time Embedded Software Engineering in C/C++ on any embedded processor/DSP/Microcontroller and RTOS (e. g. FreeRTOS TI-RTOS VxWorks etc. ) File system Boot Device drivers. Experience in stack integration and application firmware development. Well familiar with HW/SW interfacing and real-time design consideration. Experience in working with fast network/data interfaces like 1G/10G Ethernet PCI-E Familiarity with cybersecurity constructs (Static Analysis Digital Signatures etc. ) Familiar with Agile-SW development practices. Able to share ideas and work well in a team environment proactive approach to tasks displaying initiative. Guide and mentor others in the team. Flexible and adaptable; open to change and modification of tasks working in multi-tasking environment. DESIRED CHARACTERISTICS: Experience developing multi-threaded/ multi-tasking real time applications. Using emulators simulators and software analysis tools and Proficient in debugging code. Sound knowledge of Processors DSPs (preferably from Analog Devices or TI) and Microcontrollers (preferably ARM cores on Intel or Freescale chips). Experience on development of Industrial and /or Utility Communication protocols like IEC 61850 DNP IEC 60870-5-104 etc. Cyber security aspects such as symmetric and asymmetric cryptography and PKI Infrastructure LDAP RADIUS TLS SSH SFTP RSA HTTPS is an asset. Experience in using MATLAB/Simulink for Target Layer independence. Experience in all phases of the product engineering and development cycle. Additional Information Relocation Assistance Provided: Yes

We’re working on the next generation of Battery Energy Storage Systems — efficient, modular, and built for the evolving grid. If you're passionate about power electronics and want to apply your skills to real-world energy challenges, this internship might be for you. What You’ll Work On Simulating and analyzing power converter topologies (DC-DC, DC-AC, bidirectional). Assisting in converter control development – voltage regulation, current limiting, SoC balancing. Exploring circuit-level challenges: switching behavior, thermal management, filtering. Reviewing latest research in power conversion and storage integration. What We’re Looking For Final-year or postgraduate student in Electrical Engineering / Power Electronics. Comfortable with simulation tools like MATLAB/Simulink, PLECS, or PSIM. Strong grasp of power electronic fundamentals — switching, modulation, efficiency. Bonus: Exposure to BMS concepts, embedded control (e.g., STM32, TI), or EMI filtering. What You’ll Gain Monthly stipend based on your experience and skill level. Hands-on experience in designing real-world power systems. A chance to shape early-stage BESS tech with tangible impact. Close mentorship, high ownership, and exposure to full-stack energy product thinking.

Sales Account Manager Job Summary Maximize sales of MathWorks products (MATLAB and Simulink) and services to Automotive customers in the Chennai Region. The Sales Account Manager will work closely with local and international marketing and technical experts to bring the full range of MathWorks product and service offerings to our customers. **Must be based in the Chennai region to be considered ** Responsibilities • Achievement of revenue targets; New Product Sales (NPS), Software Maintenance and Services (Training and Consulting). • Develop relationships within assigned customers at all levels • Rigorously follow up and prioritize all qualified leads provided by marketing or sales support; energetically prospect for new business opportunities within these assigned customers. • Work closely with local and international marketing and technical experts to bring the full range of MathWorks product and service offerings to our customers. • Develop and manage a funnel of activities • Accurately Forecast business and activities within the territory • Raise coverage and position of MathWorks within the territory • Document and report sales activities using an advanced CRM tool Minimum Qualifications bachelor's degree and 6 years of work experience with an engineering degree is required. software sales solution selling Additional Qualifications • Degree or equivalent in an engineering is required • 4-7 years of effective solution selling experience to an industry vertical such as Engineering Services, Automotive, Aerospace, Industrial Equipment, or Communications. • Demonstrated experience to balance volume and strategic sales • Highly analytical but balanced with commercial selling ability and strong negotiation skills. • Should have experience in selling to Senior Executives and Department Heads • Self-motivated and goal driven, creative, high-energy and a strong team player. • Fluency in Tamil is required • Strong work ethics and organized, quick learner