To lead the design, development, and validation of low-power off-board AC chargers (up to 3.3 kW), ensuring product reliability, safety, and compliance with national and international EV charging standards. The role includes working across hardware, firmware, and systems engineering teams to bring efficient and cost-effective AC charging solutions to market. Key Responsibilities: • Lead and support the end-to-end development of AC EV chargers up to 3.3 kW (single-phase wall box or pedestal chargers). • Design AC-DC conversion topologies, control algorithms, and protection circuitry aligned with application and regulatory needs. • Ensure compliance with IEC 61851-1, IS 17017, and other applicable standards. • Integrate charger control with backend protocols like OCPP (1.6/2.0.1) for networked charging features. • Optimize designs for cost, size, thermal performance, and manufacturability. • Coordinate with firmware, mechanical, and compliance teams for integrated product development. • Drive EMI/EMC compliance testing, safety certifications (CE, BIS, etc.), and field validation. • Support failure analysis, root cause diagnosis, and design improvements based on field feedback. • Prepare and maintain detailed documentation including schematics, BOMs, test plans, and validation reports. Skills & Competencies: • Strong understanding of low-power AC-DC converters, PFC topologies, and power stage design. • Familiarity with single-phase electrical systems, insulation and safety requirements. • Knowledge of charging protocols • Proficiency in tools like Altium, OrCAD, MATLAB/Simulink, LTspice/PSIM. • Hands-on experience with charger firmware interface, embedded control (e.g., STM32, TI C2000). • Ability to analyze power electronics circuits for thermal performance, protection, and efficiency. • Experience with test instruments (oscilloscopes, power analyzers, EMC pre-compliance tools). • Basic understanding of OCPP and communication stacks (Modbus, CAN, RS485). • Strong problem-solving, documentation, and cross-functional collaboration skills. Educational Qualification: • B.E./B.Tech in Electrical, Electronics, or Power Electronics Engineering • M.E./M.Tech preferred in relevant domain Preferred Experience: • Experience Required 15years • At least 2–3 charger products (up to 3.3 kW) taken from concept to production • Familiarity with ARAI certifications • EV domain experience in 2W/3W segment, especially in charging ecosystem • Exposure to remote diagnostics, or smart charging feature Show more Show less

Prasad Group of Institutions is looking for Laboratory instructor to join our dynamic team and embark on a rewarding career journey Guide students in performing lab experiments Ensure lab safety and proper equipment use Evaluate student performance and provide feedback Maintain laboratory inventory and records

This role involves the development and application of engineering practice and knowledge in the following technologiesDesign of mechanical systems, devices, equipment and machines; installing and maintaining mechanically functioning equipment; simulating a wide range of interactions and evaluate performance in real world scenarios; and develop prototype for manufacturability, testing and validation. - Grade Specific Focus on Mechanical Physical Engineering. Develops competency in own area of expertise. Shares expertise and provides guidance and support to others. Interprets clients needs. Completes own role independently or with minimum supervision. Identifies problems and relevant issues in straight forward situations and generates solutions. Contributes in teamwork and interacts with customers. Skills (competencies) Active Listening Adaptability Analytical Thinking CAD & Digital Twin DesignGenerative Design & Additive Manufacturing Collaboration Material Science and Recycling Process Material ScienceMetals, Composite, Surface and Nanomaterials Problem Solving Product Digital DesignAutoCAD Product Digital DesignAutodesk Fusion 360 Product Digital DesignCATIA V5 Project Management Project Planning Projects & QCT Management, Supplier Management Rapid DynamicsCrash and Vulnerability Risk Management Scope Management Specification and Management Stakeholder Management Static Stress Analysis Static StressPhysics & Simulation Science Strategic Thinking Sustainability-Electrification Sustainability-Green Hydrogen

This role involves the development and application of engineering practice and knowledge in the following technologiesDesign of mechanical systems, devices, equipment and machines; installing and maintaining mechanically functioning equipment; simulating a wide range of interactions and evaluate performance in real world scenarios; and develop prototype for manufacturability, testing and validation. - Grade Specific Focus on Mechanical Physical Engineering. Develops competency in own area of expertise. Shares expertise and provides guidance and support to others. Interprets clients needs. Completes own role independently or with minimum supervision. Identifies problems and relevant issues in straight forward situations and generates solutions. Contributes in teamwork and interacts with customers. Skills (competencies) Active Listening Adaptability Analytical Thinking CAD & Digital Twin DesignGenerative Design & Additive Manufacturing Collaboration Material Science and Recycling Process Material ScienceMetals, Composite, Surface and Nanomaterials Problem Solving Product Digital DesignAutoCAD Product Digital DesignAutodesk Fusion 360 Product Digital DesignCATIA V5 Project Management Project Planning Projects & QCT Management, Supplier Management Rapid DynamicsCrash and Vulnerability Risk Management Scope Management Specification and Management Stakeholder Management Static Stress Analysis Static StressPhysics & Simulation Science Strategic Thinking Sustainability-Electrification Sustainability-Green Hydrogen

Experience : 8.00 + years Salary : Confidential (based on experience) Shift : (GMT+05:30) Asia/Kolkata (IST) Opportunity Type : Office (Noida) Placement Type : Full time Permanent Position (*Note: This is a requirement for one of Uplers' client - Addverb) What do you need for this opportunity? Must have skills required: BLDC motors, Motors, Power electronics Addverb is Looking for: Job Description: Addverb Technologies Limited (Formerly known as Addverb Technologies Private Limited) Registered & Corporate Office: CIN: U74999UP2016PLC122944 Email: automate@addverb.com Plot No. 5, Sector-156, Phase-II, Noida, 201301, UP, India Contact: 0120 4844 759 Website: www.addverb.com GST No: 09AAOCA5226F2ZL Doc.No.: - FRM/HR/33 Rev.No./Date: - 00 Job Description Format Origin Date: - 01-11-2023 Job Description Role Department Senior Embedded Firmware Engineer Embedded Systems Reports To DGM or above Purpose of the role The incumbent will be responsible for designing, implementing, and optimizing firmware for high-performance motor control applications, specifically focusing on Field-Oriented Control (FOC) for BLDC, PMSM, and other electric motors. The role involves working closely with cross-functional teams to develop scalable and efficient solutions for motor performance optimization and power systems. The candidate will ensure the integration of robust control algorithms and power management solutions, leveraging expertise in TI (C2000 series), Infineon (Aurix, XMC series), and ST Microcontroller (STM32 series) ecosystems. This role will also require exploring innovative technologies to enhance motor efficiency and may involve occasional travel for system integration and support. Technical Skills Required Expertise in FOC based motor control Proficiency in C/C++ for embedded systems, including RTOS-based and bare-metal firmware development Expertise in control theory, power electronics and motor dynamics. Familiarity with TI C2000, Infineon Aurix/XMC, and ST Microcontroller (STM32) ecosystem for FOC solutions. Familiarity with CAN, SPI, UART, I2C, and other communication protocols. Experience with digital signal processing (DSP) techniques and fixed/floating-point arithmetic. Knowledge of ISO 26262, IEC 61508, or other safety-critical standards Behavioural Skills Required Problem-Solving Attention to Detail Team Collaboration Adaptability Communication Time Management Critical Thinking. S. No. Job Responsibilities Architect, design, and develop high-performance firmware for motor control applications using FOC, vector control, and sensorless control techniques. Implement and optimize real-time embedded firmware on MCUs (e.g., TI C2000, Infineon Aurix/XMC, STM32, or similar platforms). Develop and refine control algorithms to improve motor efficiency, torque response, and dynamic performance. Work with power electronics engineers to integrate motor control firmware with hardware for inverters, converters, and drives. Utilize Matlab/Simulink, Python, or C/C++ to model, simulate, and validate control algorithms. Conduct system-level analysis, including power consumption, thermal management, and EMI mitigation. Implement fault detection, diagnostics, and safety mechanisms for robust operation in industrial and automotive applications Collaborate with cross-functional teams, including hardware engineers, mechanical engineers, and system architects, to ensure optimal motor and power system performance Lead firmware optimization efforts, including code profiling, memory management, and CPU utilization improvements. Stay updated on industry trends, emerging technologies, and advancements in motor control, power systems, and embedded firmware development. Minimum Qualification Bachelor's or master's degree in electrical engineering, Computer Engineering, Embedded Systems, or a related field Years Of Experience 8-10 years of experience How to apply for this opportunity? Step 1: Click On Apply! And Register or Login on our portal. Step 2: Complete the Screening Form & Upload updated Resume Step 3: Increase your chances to get shortlisted & meet the client for the Interview! About Uplers: Our goal is to make hiring reliable, simple, and fast. Our role will be to help all our talents find and apply for relevant contractual onsite opportunities and progress in their career. We will support any grievances or challenges you may face during the engagement. (Note: There are many more opportunities apart from this on the portal. Depending on the assessments you clear, you can apply for them as well). So, if you are ready for a new challenge, a great work environment, and an opportunity to take your career to the next level, don't hesitate to apply today. We are waiting for you! Show more Show less

The opportunity Able to lead a team with strong people management skills, to deliver the value, expected from the team. The team manager is expected to define and implement both long term and short-term strategies, for the team, as per the overall organization strategy. How you ll make an impact Contribute to RD projects from the initial concept stage to final product rollout. You will be responsible for the overall electrical system including selection of appropriate ratings (power, voltage, current) of the equipment, selection of on-board battery energy and voltage levels or agreeing these with other partners, e. g. , bus OEMs. Designing the overall charging system based on an understanding of the dependence on the above. Develop and assess protection concepts for low voltage - low power charger (100kW 600V DC). Develop and assess protection concepts for high power chargers (1500kW 1500V DC). Develop system simulations for grid code compliance (THDi, THDu, power factor, DC ripple etc. ). System design, SLD MLD (single- and multi-lines diagrams), BOM (bill of materials). Write tutorial, guidelines, test procedures, report templates for engineering and commissioning engineers. Write technical specifications for internal and external suppliers. Benchmark and cost evaluation. Audit, assessment of external partners, including power electronic converter part. Lab testing (heat-run, EMC, noise, electrical endurance), official type tests certification, factory acceptance tests, site acceptance tests, commissioning, end-user training at a domestic and international level. Support customer project tendering and execution activities. Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your background Degree (University/University of Applied Sciences) in Electrical Engineering with an emphasis on Power Electronics and Control. Industrial experience with low voltage power converters is an advantage Proficiency in the use of simulation tools such as MATLAB/Simulink or PSCAD. Experience with low voltage and medium voltage network distribution would be an advantage Experience with DC network Energy Storage Systems (battery, supercaps, BMS) would be an advantage Experience in eRoom, outdoor panel, cooling design, and noise attenuation would be an advantage Team spirit with the capacity to work independently, complemented by a quick intellect and well-developed analytical skills Experience working in an Agile development team would be preferred Experience in working with IEC standard, ANSI etc. Proficiency in both spoken written English language is required. More about us Are you ready for an exciting new OpportunityDoes the above description sounds like youWelcome to apply! Our selection process is continuous, do apply. Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. .

Senior Embedded Firmware Engineer Experience: 8 - 12 Years Exp Salary: Competitive Preferred Notice Period: 30 Days Opportunity Type: Onsite (Noida, UP) Placement Type: Full-time (*Note: This is a requirement for one of Uplers' Clients) Must have required skills: BLDC motors, Motors OR Power electronics Addverb (One of Uplers' Clients) is Looking for: Senior Embedded Firmware Engineer who is passionate about their work, eager to learn and grow, and committed to delivering exceptional results. If you are a team player, with a positive attitude and a desire to make a difference, then we want to hear from you. Role Overview Description Senior Embedded Firmware Engineer Embedded Systems Reports To DGM or above Purpose of the role The incumbent will be responsible for designing, implementing, and optimizing firmware for high-performance motor control applications, specifically focusing on Field-Oriented Control (FOC) for BLDC, PMSM, and other electric motors. The role involves working closely with cross-functional teams to develop scalable and efficient solutions for motor performance optimization and power systems. The candidate will ensure the integration of robust control algorithms and power management solutions, leveraging expertise in TI (C2000 series), Infineon (Aurix, XMC series), and ST Microcontroller (STM32 series) ecosystems. This role will also require exploring innovative technologies to enhance motor efficiency and may involve occasional travel for system integration and support. Technical Skills Required Expertise in FOC based motor control Proficiency in C/C++ for embedded systems, including RTOS-based and bare-metal firmware development Expertise in control theory, power electronics and motor dynamics. Familiarity with TI C2000, Infineon Aurix/XMC, and ST Microcontroller (STM32) ecosystem for FOC solutions. Familiarity with CAN, SPI, UART, I2C, and other communication protocols. Experience with digital signal processing (DSP) techniques and fixed/floating-point arithmetic. Knowledge of ISO 26262, IEC 61508, or other safety-critical standards Behavioural Skills Required Problem-Solving Attention to Detail Team Collaboration Adaptability Communication Time Management Critical Thinking. S. No. Job Responsibilities Architect, design, and develop high-performance firmware for motor control applications using FOC, vector control, and sensorless control techniques. Implement and optimize real-time embedded firmware on MCUs (e.g., TI C2000, Infineon Aurix/XMC, STM32, or similar platforms). Develop and refine control algorithms to improve motor efficiency, torque response, and dynamic performance. Work with power electronics engineers to integrate motor control firmware with hardware for inverters, converters, and drives. Utilize Matlab/Simulink, Python, or C/C++ to model, simulate, and validate control algorithms. Conduct system-level analysis, including power consumption, thermal management, and EMI mitigation. Implement fault detection, diagnostics, and safety mechanisms for robust operation in industrial and automotive applications Collaborate with cross-functional teams, including hardware engineers, mechanical engineers, and system architects, to ensure optimal motor and power system performance Lead firmware optimization efforts, including code profiling, memory management, and CPU utilization improvements. Stay updated on industry trends, emerging technologies, and advancements in motor control, power systems, and embedded firmware development. Minimum Qualification Bachelor's or master's degree in electrical engineering, Computer Engineering, Embedded Systems, or a related field Years of experience 8-10 years of experience About Uplers: Our goal is to make hiring and getting hired reliable, simple, and fast. Our role will be to help all our talents find and apply for relevant product and engineering job opportunities and progress in their career. (Note: There are many more opportunities apart from this on the portal.) So, if you are ready for a new challenge, a great work environment, and an opportunity to take your career to the next level, don't hesitate to apply today. We are waiting for you! Show more Show less

Date Posted: 2025-06-05 Country: India Location: North Gate Business Park Sy.No 2/1, and Sy.No 2/2, KIAL Road, Venkatala Village, Chowdeshwari Layout, Yelahanka, Bangalore, Karnataka 560064 Position Role Type: Unspecified Job Description Title: Principal Engineer (Hybrid) Experience: 12 to 14 Years Roles & Responsibilities : To work as an Independent contributor in a team developing, enhancing and maintaining safety critical software. Accomplish the assigned tasks within the planned milestones meeting quality, cost and schedule. End to end software Development activities as per DO178B/C guidelines. Strong understanding of the communication protocols A429, A615, A664, CAN and TTP. Strong understanding on RTOS Concepts. Hands on experience with Python/dxl scripting, C and MATLAB-Simulink and State flow. Hands-on experience with the SOI Audits and Certification process. Experience in performing Timing/Memory/Partition analysis, Data coupling and control coupling (DCCC). Experience in software debugging tools (like pathfinder, trace 32, wind river). Writing and maintaining problem reports to meet change control, on software design and technical specifications in accordance with DO178 B/C guidelines. Expertise with Software Configuration Management and Change Control Process (DOORS, Synergy, SVN etc.) Communicate and coordinate effectively with team at onsite. Exhibit technical leadership, build and nurture the team. Develop team strengths and improve upon their weaknesses. Lead and motivate team on future technologies. Experience in mentoring & developing team competency. Lead and contribute to the department initiatives of Continuous Improvement and Innovation. Maintain integrity and work ethics within the team. Preferred Skill Set : Knowledge of Aircraft Electric Systems products(GCU/BPCU). Exposure to DevOps for continuous integration . Exposure on Agile based software development. Knowledge of MBSE. Basic Qualifications : Education: BE / B Tech / ME / M Tech 12+ years of experience in safety critical SW Development. About Collins Aerospace: Collins Aerospace, a Raytheon Technologies company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market. Our Avionics team advances aviation electronics and information management solutions for commercial and military customers across the world. That means we’re helping passengers reach their destination safely. We’re connecting aircraft operators, airports, rail and critical infrastructure with intelligent data service solutions that keep passengers, flight crews and militaries connected and informed. And we’re providing industry-leading fire protection and safety systems that our customers can count on when it matters most. Are you ready to learn from the most knowledgeable experts in the industry, develop the technologies of tomorrow and reach new heights in your career? Join our Avionics team today. We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight! WE ARE REDEFINING AEROSPACE. Some of our competitive benefits package includes: Group Term Life Insurance. Group Health Insurance. Group Personal Accident Insurance. Entitled for 22 days of vacation and 7 days of contingency leave annually. Employee scholar program. Work life balance. Car lease program. National Pension Scheme LTA Fuel & Maintenance /Driver wages Meal vouchers And more! Nothing matters more to Collins Aerospace than our strong ethical and safety commitments. As such, all India. positions require a background check, which may include a drug screen. Note: Background check and drug screen required At Collins, the paths we pave together lead to limitless possibility. And the bonds we form – with our customers and with each other - propel us all higher, again and again. Apply now and be part of the team that’s redefining aerospace, every day. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Schaeffler is a dynamic global technology company and its success has been a result of its entrepreneurial spirit and long history of private ownership. Does that sound interesting to you? As a partner to all of the major automobile manufacturers, as well as key players in the aerospace and industrial sectors, we offer you many development opportunities. General Information: As a member of 2Wheeler Powersport Group you will participate in the implementation of the software that is flashed on the Electronic Control Unit. The Electronic Control Unit together with the software developed by us ensures a more affordable mobility and a cleaner environment. Job description: Function development/Algorithm development Auto-code generation with MATLAB, Simulink and Target link/E-Coder Verification and Validation Interaction with the counterparts/customers Job requirement: Degree in Engineering & total 3 to 5 years of experience. Model based development Code generation experience with Target link, Embedded coder Hands on experience with MATLAB, Simulink Good proficiency in C language Functional knowledge of Engine management systems Hands on experience with tools like INCA, CANalyzer As a global company with employees around the world, it is important to us that we treat each other with respect and value all ideas and perspectives. By appreciating our differences, we inspire creativity and drive innovation. In this way, we contribute to sustainable value creation for our stakeholders and society as a whole. Together, we advance how the world moves. Exciting assignments and outstanding development opportunities await you because we impact the future with innovation. We look forward to your application. www.schaeffler.com/careers Your Contact Vitesco Technologies India Pvt. Ltd. Hemanth Hurudi Show more Show less

Job Requirements Quest Global is an organization at the forefront of innovation and one of the world's fastest growing engineering services firms with deep knowledge and recognized expertise in the top OEMs across seven industries. We are a twenty-five-year-old company on a journey to becoming a centenary one, driven by aspiration, hunger and humility. We are looking for humble geniuses, who believe that engineering has the potential to make the impossible possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers. As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then we are eager to hear from you. The achievers and courageous challenge-crushers we seek have the following characteristics and skills: Roles & Responsibilities: Under the direction of the customer, position will be responsible for leading systems engineering activities, including systems requirements, system architecture/ design and system integration of Automotive Systems, with specific focus on ADAS Sensors and Control systems for Commercial Vehicles (both ICE and EV) Responsible for selecting/creating software architecture in Powertrain domain. Attend Design Verification meeting and get approval. Guide team in implementing architecture, review, and delivery. Analyze field issues and find solutions. Get the solutions implemented and verify Check the Laws and regulations for the vehicle component and Scenarios and AIS Standards and Perform Risk Mitigation Analysis Systems engineering, modelling and validation activities analyzing requirements and assessing compliance, defining interfaces, flow down of system requirements to subsystems & components, system integration and system verification/ validation, around Model Based Systems Engineering (MBSE) centric methodologies, processes and practices Provide hands-on mentoring, training, and guidance on MBSE Support for design understanding and participation in design meetings Work Experience Required Skills (Technical Competency): Subject Matter Expert (SME) and Practitioner in Systems Engineering, with hands-on experience pertaining to Automotive domain like ADAS, Powertrain, Control systems Subject matter expert (SME) and Practitioner on MBSE with deep hands-on experience on MBSE toolchain including SysML modeling tools such as Astah, Cameo and Enterprise Architect Collaborate with cross-functional teams to capture, analyze and validate system requirements spanning various Control systems Expertise in Model Based System Engineering (MBSE) Experience in Plant model development in Matlab/Simulink Experience in Automotive ADAS Sensor control design and development, Factory Calibration Methods and EOL Testing of Sensors like RADAR, Camera. Expertise System architecture, control system design and analysis Expertise System integration, verification, validation Expertise with System V-Cycle and systems processes defined ISO/IEC15288 Proven track record of complex problem solving Product and system engineering proficiency aligned with Automotive, ADAS Domain Controller, Communications and Vehicle Level Validation ASPICE Should have 11+ years of experience in MBSE, SysML, ADAS, Control System, Plant model development. Good to have knowledge about Field Testing of Long Vehicle ADAS Communication and V2X for Commercial Vehicles Desired Skills: OEM, Tier1, supplier development experience. Experience in Vehicle Sub Systems Design and Validation (ADAS Sensor Systems). Experience in Matlab, Simulink model-based development (MBD) in automotive domain. Experience in ECU design process involved V-cycle. Experience in MIL, SIL, HIL verification and validation. Experience in using CANoe or similar tools for validation. Experience in Requirements Management using tools like DOORS, Polarion, etc. Requirements engineering, Exposure to SOA (service-oriented architecture), Model based engineering and drive simulation, Fusa-ISO26262, Handling HARA ,V&V E/E architecture, Domain architecture, ASPICE, Centralized domain architecture. Knowledge of HPC, Exposure to AUTOSAR

At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars. Job Title EN-FR-03: EDU Manager Purpose of the Job He/she manages the resources, in the broad sense, required by a Project to execute engineering activities of TCMS Software He/she supports consistent development of competencies required for this domain, following the right methodologies and tools He/she ensures the application of the standard processes in MPU Software Development Position in the Organisation Organisation Reporting Hierarchical: Software Domain Leader (SWDL) Network & Links Train Control Engineer / Control Engineer Verification & Validation Leader / Engineer Train Validation Engineer Sub-System Manager (SSM) Leaders of other Domain Missions Performance Measurement/KPI’s Workload management of his/her team :Capacity = workload ± 5% Quality of the delivery (included sub-contractor delivery):1st time quality rate > 90% (quality rate = modification validated OK / number of modification applied) Respect of the delivery planning (included sub-contractor delivery):100% OTD Level of application of std Methodologies and Processes for his / her project: 100% Continuous improvement or Return on Experience (RoE) management from previous projects: 0 missing RoE Responsibilities Accountable for : Set clear directions and objectives for your team, aligning them with the broader organizational goals. Demonstrate a strong commitment to teamwork by caring for all team members, providing constructive feedback and acting fairly in all interactions. Identify key milestones, principal activities and assign responsibilities to ensure project success. Proactively monitor the progress of activities to identify potential delays and implement mitigation actions to prevent or minimize their impact. Managing the traceability and configuration of tools used by his/her team. Identify and nurture talent within the team, recognizing and fostering the potential of team members. Responsible for : Collaborate with subject matter experts to thoroughly comprehend the requirements and constraints within our domain/metier. Facilitate discussions and gather essential insights to inform decision-making. Develop comprehensive communication action plans that consider target audiences and defined objectives, ensuring effective dissemination of information. Identify and address conflicts of interest within the domain/metier, maintaining composure and confidence during resolution processes. Maintain an optimistic outlook while critically challenging project estimations to ensure realistic timelines and resource allocation. Drive your team to analyze lessons learned (REX) across projects and apply these insights to continuous improvement efforts. Develop and mentor team members within their respective roles. Organize and delegate tasks efficiently to ensure optimal resource utilization and project progress. Use appropriate forms of communication (verbal, written, text, graphic, formal, informal) with both internal and external stakeholders, ensuring timely and effective information exchange. Recognize and escalate issues based on their criticality, involving yourself when necessary to defuse volatile situations and find resolutions. Job Specifications Knowledge & Experience Extensive hands-on experience in the complete software development life cycle across two or more projects, including requirement gathering, analysis, architecture design, and integration with at least 12 years of experience. Managed a team of 5 to 8 engineers to ensure the achievement of QCD KPIs (at least 3 years). Train system knowledge (system analysis, railways) (at least 2 years), Experience in developing in IEC61131-3 (FBD, ST and SFC) software or using model-based development tools like Controlbuild, MATLAB / Simulink etc. Familiarity with real-time, distributed controllers and their functioning. Knowledge of real time network protocols like MVB, CIP, Ethernet, CAN, RS232, RS485 etc Managing work packages for sub-contractors. Team size Manage team of 5 or more Leading societies to a low carbon future, Alstom develops and markets mobility solutions that provide the sustainable foundations for the future of transportation. Alstom’s products portfolio ranges from high-speed trains, metros, monorail, trams and e-buses to integrated systems, customised services, infrastructure, signalling and digital mobility solutions. Joining us means joining a caring, responsible, and innovative company where more than 70,000 people lead the way to greener and smarter mobility, worldwide. Alstom is an equal opportunity employer committed to creating an inclusive working environment where all our employees are encouraged to reach their full potential, and individual differences are valued and respected. All qualified applicants are considered for employement without regard to race, colour, religion, gender, sexual orientation, gender identity, age, national origin, disability status, or any other characteristic protected by local law. Job Segment: Manager, Systems Analyst, Management, Technology

Job Requirements Job Requirements Quest Global is an organization at the forefront of innovation and one of the world's fastest growing engineering services firms with deep knowledge and recognized expertise in the top OEMs across seven industries. We are a twenty-five-year-old company on a journey to becoming a centenary one, driven by aspiration, hunger and humility. We are looking for humble geniuses, who believe that engineering has the potential to make the impossible possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers. As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then we are eager to hear from you. The achievers and courageous challenge-crushers we seek have the following characteristics and skills: Roles & Responsibilities: Under the direction of the customer, position will be responsible for leading systems engineering activities, including systems requirements, system architecture/ design and system integration of Automotive Systems, with specific focus on ADAS Sensors and Control systems for Commercial Vehicles (both ICE and EV) Responsible for selecting/creating software architecture in Powertrain domain. Attend Design Verification meeting and get approval. Guide team in implementing architecture, review, and delivery. Analyze field issues and find solutions. Get the solutions implemented and verify Check the Laws and regulations for the vehicle component and Scenarios and AIS Standards and Perform Risk Mitigation Analysis Systems engineering, modelling and validation activities analyzing requirements and assessing compliance, defining interfaces, flow down of system requirements to subsystems & components, system integration and system verification/ validation, around Model Based Systems Engineering (MBSE) centric methodologies, processes and practices Provide hands-on mentoring, training, and guidance on MBSE Support for design understanding and participation in design meetings Work Experience Required Skills (Technical Competency): Subject Matter Expert (SME) and Practitioner in Systems Engineering, with hands-on experience pertaining to Automotive domain like ADAS, Powertrain, Control systems Subject matter expert (SME) and Practitioner on MBSE with deep hands-on experience on MBSE toolchain including SysML modeling tools such as Astah, Cameo and Enterprise Architect Collaborate with cross-functional teams to capture, analyze and validate system requirements spanning various Control systems Expertise in Model Based System Engineering (MBSE) Experience in Plant model development in Matlab/Simulink Experience in Automotive ADAS Sensor control design and development, Factory Calibration Methods and EOL Testing of Sensors like RADAR, Camera. Expertise System architecture, control system design and analysis Expertise System integration, verification, validation Expertise with System V-Cycle and systems processes defined ISO/IEC15288 Proven track record of complex problem solving Product and system engineering proficiency aligned with Automotive, ADAS Domain Controller, Communications and Vehicle Level Validation ASPICE Should have 11+ years of experience in MBSE, SysML, ADAS, Control System, Plant model development. Good to have knowledge about Field Testing of Long Vehicle ADAS Communication and V2X for Commercial Vehicles Desired Skills: OEM, Tier1, supplier development experience. Experience in Vehicle Sub Systems Design and Validation (ADAS Sensor Systems). Experience in Matlab, Simulink model-based development (MBD) in automotive domain. Experience in ECU design process involved V-cycle. Experience in MIL, SIL, HIL verification and validation. Experience in using CANoe or similar tools for validation. Experience in Requirements Management using tools like DOORS, Polarion, etc. Requirements engineering, Exposure to SOA (service-oriented architecture), Model based engineering and drive simulation, Fusa-ISO26262, Handling HARA ,V&V E/E architecture, Domain architecture, ASPICE, Centralized domain architecture. Knowledge of HPC, Exposure to AUTOSAR

What You’ll Do The Controls Engineer’s primary responsibility will be Production Level Controls development for EATON’s Electrification products on Power electronics and Power distribution portfolio. The position will be involved in many different aspects of the product life-cycle, ranging from product specification, requirements engineering, Design & Development, and validation. Successful candidates will possess the determination required to track down and solve hard to find vehicle level controls issues. Applicant shall have experience in design, development of HV and LV Power converters. Applicant shall have exposure of performing analytical design calculations, knowledge of system requirements and validation methods including HILS and vehicle testing. Candidate should have knowledge of vehicle market and technology trends. The candidate must be self-motivated and possess good communication skills. Preferred to have cross functional team working experience (namely engineering, manufacturing, project management, marketing and supply chain). Define Requirements, design, development and testing of electric machine drives specifically for automotive powertrain electrification. Perform software validation in MILS, HILS environment including test plan preparation. Works closely with global and internal team members for Production Software development and integration on Dynamometer and vehicle level environment. Provides guidance and helps controls engineers from the team. Maintain up to date knowledge of new technology and recent development and trends in motor control technologies. Qualifications Master in Power Electronics or Bachelors in Electrical/Electronics 1-5 years of experience EDUCATION: Required: Masters degree in Power Electronics or equivalent and relevant experience of 1-3 years in Power converter controls development Skills Engineer E2S Controls Team. SkillSets. Expertise in Power Electronics/ Converter algorithm development using Model based design tools like MATLAB/Simulink/Target Link including SIL, MIL and HIL simulation. Experience in plant model simulations for power converters. Support dynamic simulation of electric drive system including performance, losses etc. Design and implement real time embedded software on DSP, microcontroller platform. Experience in testing and tuning of Power converter algorithm on dynamometers and vehicle environment. Proficient with the use of CAN tools like CANalyzer, CANape etc. Awareness of DFSS methodology and tools. Awareness of ASPICE software development process" Additional- Strategic Agility – sees ahead clearly; can anticipate future consequences and trends accurately, has broad knowledge and perspective; can create competitive and breakthrough strategies & plans. Drive for results – can be counted on to exceed goals successfully Motivating others – creates a climate in which people want to do their best; empowers others; is someone people like working for and with. Decision quality – makes good decisions based upon a mixture of analysis, wisdom, experience, and judgment. Business acumen – knows how business work; knowledgeable in current and possible future technologies; knows the competition. Peer relationships – can quickly find common ground and solve problems for the good of all; can represent his/her own interests and yet be fair to other groups. Interpersonal savvy – relates well to all kinds of people; builds appropriate rapport. Action oriented – enjoys working hard; is action oriented and full of energy for the things he/she sees as challenging." ]]> Show more Show less

Tenneco is one of the worlds leading designer, manufacturers and marketers of automotive products for original equipment and aftermarket customers, with approximately 78.000 team members working at more than 300 sites worldwide. Through our four business groups, DRiV, Ride Performance, Clean Air and Powertrain, Tenneco is driving advancements in global mobility by delivering technology solutions for diversified global markets, including light vehicle, commercial truck, off-highway, industrial, motorsport and the aftermarket. Job Summary The Vehicle Electrical System & Hardware Engineer has a solid knowledge in his technical field. He is responsible for the planning, build and maintenance of the local demonstration and technology vehicles for the different Monroe Ride Solutions electronically controlled suspension technologies. He ensures the build to the internal TEN standards as well as the commissioning of these vehicles. To execute his job properly, he can fall back both on theoretical knowledge of electronics/electrics and his hands-on experience in working with vehicles and to equip these with electronics (mainly rapid prototyping systems from dSpace). Job Resonsibilities Masters his technical field and stays up-to-date of any new developments and their applications in the automotive industry, by having close contacts with the suppliers and external institutes, by attending seminars and by reading technical literature. Acts for most of the projects as an individual contributor in cooperation with the Electronic Controls Systems team in Europe. Ensure compliance with program management requirements, quality requirements and all applicable EHS standards/regulations. Integrate customer-specific technical specifications into product/ process system designs. Identify potential product liability issues and take appropriate action. Support development of new suppliers and validate their products. Work Experience: 3+ years of relevant technical experience, preferably in the automotive industry. Hands-on experience with working on vehicle electrics/electronics and basic knowledge of vehicle electrical and electronic architecture. Experience and qualification in working on HEV, REEV and BEV vehicles is a plus. Basic knowledge of in-vehicle networking protocols (e.g. CAN, FlexRay …). Basic knowledge of programming, knowledge of model based software design using Matlab/Simulink is a strong plus. Specialized Skills/Knowledge: Fluent in English with a vocabulary spanning automotive technology as well as electrical/electronic engineering and programming. Knowledge about vehicle electrical and electronic systems; hands-on experience in cable harness design and wiring electronics (in vehicles). Experience with Rapid Application Prototyping systems (eg dSpace). Experience with Controls Systems design and calibration methods and tools (eg Vector Canape). Strong background in general electronics. Basic knowledge on automotive sensors and sensor interfaces. Knowledge about vehicle communication buses (e.g. CAN, Flexray, …) Awareness of standards and processes used in the development of automotive electronics and software (ASPICE, ISO 26262, cyber-security, …) is a plus. Basic knowledge of vehicle dynamics is a plus. Willingness to travel on an ad-hoc basis to visit customers. (In the beginning of his employment the engineer is willing to travel to Europe for intensive training on the skills needed for one or more periods of multiple weeks). Confidentiality: works with sensitive data from the customer that cannot be disclosed. Show more Show less

Job Description Key Skills Required: Requirements Engineering & Management Ability to identify different use cases based on User level requirements. Ability to analyze and realize System architecture and design. Able to translate high level customer requirements into System Requirements,functional and non- functional requirements. Create logical and physical architecture. Experience in Safety Critical Product Development Knowledge of System Architecture and Modelling Tools – like Rhapsody, Enterprise Architect, MATLAB/Simulink, Stateflow, , Magic Draw, Cameo .Experience in System Engineering, Sys/SW/HW architecture design,System Test execution on HILS, or Vehicle. Advanced knowledge of DOORS or other requirement management tools, Functional Safety knowledge and how to capture this in system requirements. Hands on experience with either ADAS or Aerospace system development project. Good understanding of System and Safety Engineering and Hands on experience with FMEA,P-Diagram, Fault Tree Analysis. Thorough understanding of system engineering principles and the software development lifecycle Capability to understand if system design aspects have been correctly translated to Network design, software & hardware design. Required Skills System Engineering,Requirement Engineering,Rhapsody,MBSE Supported Skills Sysml,Enterprise Architech,Doors,Rhapsody,Magic draw Show more Show less

Job Description Hiring Engineers, Technical Leads, and Architects with Embedded C Expertise With 100s of millions of lines of code, automobiles are seeing an exponential growth in software – so much so that next generation vehicles are referred to as “Software Defined Vehicles”. With Embedded at the core of the control and communication software stack of these Software Defined Vehicles, professionals with strong Embedded C competencies will find the domain on Automotive and Mobility a fascinating and challenging one. KPIT is working with world’s leading Automotive OEMs and Tier 1s in building next-generation technology for Software Defined Autonomous, Electric and Connected vehicles. You will get to be a part of next-generation complex, challenging projects in these fields. At KPIT, you will design, develop and integrate base software layers, middleware components, and applications that will power future Software Defined Vehicles. If you are a professional with Embedded C expertise and possess strong analytical and problem-solving skills with experience in any domain from telecom, medical electronics, media or gaming, here is the next frontier for you. We are inviting developers, Technical Leads and Architects to be part of this exhilarating journey of writing software for most complex systems such as automobiles. Mandatory Skills Proficiency in C / Embedded C with fair knowledge of advanced concepts Embedded systems design and development experience with exposure to low-level hardware interactions Strong analytical and problem-solving skills Development experience on any of the RTOSs such as OSEK QNX FreeRTOS VxWorks Good verbal and written communication skills Developers Technical Leaders Architects Program design skills Coding best practices Debugging skills Program decomposition and work allocation Firmware development and debugging Strong review and troubleshooting skills Strong embedded system architecture and design experience Expertise in modeling based on UML / SysML Strong RCA skills Required Skills Proficiency in C / Embedded C with fair knowledge of advanced concepts ,Embedded systems design and development experience with exposure to low-level hardware interactions,Strong analytical and problem-solving skills,Development experience on any of the RTOSs such as OSEK QNX FreeRTOS VxWorks,Good verbal and written communication skills Supported Skills Agile development experience ,Experience with communication buses and protocols such as CAN ,Ethernet TCP/IP SOME/IP UDS J1939 etc,Experience with AUTOSAR based software development,Experience with AUTOSAR BSW module development,Experience with tools such as CANoe CANalyzer etc,Modeling experience with tools such as MatLab/Simulink Vector DaVinci PREEvision DSpace SystemDesk e,Knowledge of methodology such ASPICE MISRA guidelines and functional safety standards such as ISO262,Experience with test automation techniques ,Experience with version management tools such Git / Gitlab / Github,Experience with DevOps and CI/CD environment for embedded systems Show more Show less

Job Description Must To Have Skills: Exposure in Model based Development Hands on experience on MATLAB/SIMULINK tool usage RTW, Targetlink, Scripting Knowledge in Control Systems Should have strong knowledge on Model Based design/Auto code generation Experience in CAN, SPI, UART or I2C protocol and CAN related tools - good to have Knowledge on requirement specification Experience in Model in loop testing Analytical ability and strong debugging skills M Scripting Experience knowledge in Automotive domain (preferred) Required Skills Matlab/Simulink/Stateflow, TargetLink, MISRA ,ASPICE SWE1, SWE2, SWE3, and SWE4 ,Chassis,E-RTW or TargetLink,Model Based Development(MBD),M-Script,MIL/SIL,Embedded C,UART,can,hil Supported Skills fusa,iso26262 Show more Show less

Position: Assistant Professor – Aerospace Engineering Specialization: Aeronautical & Space Infrastructure and Allied Fields Experience: 2–7 years (Teaching/Research) Qualification: Ph.D. in Aerospace Engineering or relevant specialization About the Role We are inviting applications from enthusiastic and highly qualified candidates for the position of Assistant Professor in the Department of Aerospace Engineering . The role focuses on teaching, research, and academic development in areas related to Aeronautical Systems, Space Infrastructure, Satellite Technology, and Allied Aerospace Fields . The ideal candidate will have a strong academic background, a Ph.D., and a demonstrated passion for education, research, and innovation. Primary Responsibilities Deliver lectures, practical sessions, and tutorials at undergraduate and postgraduate levels. Design and update syllabi for courses in aeronautics, satellite technology, propulsion, and space mission architecture. Guide student research projects, theses, and internships. Publish high-quality research papers in reputed journals and conferences. Contribute to funded research and consultancy in collaboration with space agencies, R&D labs, or defense organizations. Participate in curriculum development, quality assurance, and accreditation activities. Organize workshops, conferences, guest lectures, and industry interaction programs. Mentor and support students in academic and co-curricular development. Engage in interdisciplinary collaborations within and outside the institution. Key Areas of Expertise Aerodynamics and Flight Mechanics Satellite and Launch Vehicle Design Aerospace Propulsion and Thermal Systems Avionics, Navigation, and Control Systems Spacecraft Structures and Materials Mission Planning & Space Infrastructure Computational Methods in Aerospace Engineering Desirable Skills Proficiency in engineering tools such as MATLAB, ANSYS, STK, CATIA, SolidWorks, Simulink, OpenFOAM Experience in simulation, CFD, FEM, and systems modeling Strong research portfolio with Scopus/SCI publications Industry linkages or prior collaborations with ISRO, DRDO, HAL, or similar Excellent communication, leadership, and mentoring capabilities Strong proposal writing and grant acquisition abilities Eligibility Criteria Ph.D. in Aerospace Engineering or a related domain from a recognized institution. Minimum 2 years of full-time teaching or postdoctoral research experience . Proven record of research and academic contribution in relevant fields. Show more Show less

Job Requirements Roles & Responsibilities: Analysis of Simulink models. Optimization of Simulink models for NVIDIA Target hardware. Code Generation using GPU Coder. Testing of models using Reactis, Simulink Test or related tools. Testing using simulated Test benches. Vehicle Testing. Work Experience Required Skills (Technical Competency): 5-8 YoE in Model Based Development using MATLAB / Simulink tools. Experience in developing and optimizing Simulink Models. Experience in using Parallel computing toolbox, Vehicle network toolbox, MATLAB Coder, Simulink Coder, Embedded Coder, GPU Coder Desired Skills Experience in working with Model based development for NVIDIA and Renesas R-Car platforms. Experience in ADAS/AD domain. Show more Show less

Job Requirements The primary responsibility for this role is analyzing the data recordings of the Automated Driving Systems, Infrastructure communications and Embedded platforms and recognizing the root cause of the bugs and failures in the system and potential solution for them. Job responsibility also requires analysis for CAN data recordings using PCAN tools, UDP data recordings using Wireshark Recordings, Embedded system recordings using custom GUI recordings and finding the failure points in the system. Understanding the complete Rover Controls MATLAB/Simulink model, path planning and control algorithms, data communication blocks and auto generated embedded code which will be required for defect analysis. Understanding how to run the auto generated embedded code on the embedded platforms and debug the failures during the testing of the software Document the test protocols, and results. Prepare and maintain evaluation processes and check sheets. Collect the information to assist algorithm development team with system data for issue identifications. Familiarity with sensor technologies such as radar, lidar, and cameras etc. which will be used for bug detection and resolution Work Experience Proficient in the use of MATLAB/Simulink, Embedded platforms, CAN tools, Wireshark and JIRA. Experience in rapid prototyping systems (Specifically dSPACE products). Experience in working on Embedded Platforms (Specifically NVIDIA platforms) in development and integration Experience in MATLAB or Python scripting and plotting for data analysis and debugging. Proficient with communication protocols especially (CAN, UDP, MQTT) Knowledge about the controls algorithms such as NMPC, PID, LQR and Path planning algorithms such as A*, Hybrid A*, Dijkstra etc. Show more Show less

Job Requirements We are seeking an experienced Embedded Validation Engineer with expertise in Advanced Driver Assistance Systems (ADAS), perception algorithms, dSPACE, and NVIDIA platforms . The ideal candidate will be responsible for validating embedded software, testing perception models, and ensuring the robustness of ADAS functionalities across different hardware platforms. Key Responsibilities Embedded Software Validation: Develop and execute test plans, test cases, and test automation for ADAS and perception systems. Validate embedded software running on dSPACE Scalexio, NVIDIA Jetson, and other automotive platforms. Conduct Software-in-the-Loop (SiL), Hardware-in-the-Loop (HiL), and Vehicle-level testing. Perform real-time debugging, issue analysis, and defect tracking. ADAS & Perception System Testing Validate sensor fusion, object detection, lane detection, and path planning algorithms. Ensure performance benchmarking of camera, LiDAR, and radar-based perception models. Work closely with AI/ML teams to validate deep learning-based perception models. DSPACE & NVIDIA Platform Expertise Work with dSPACE Scalexio, ControlDesk, and AutomationDesk for validation tasks. Validate and optimize CUDA, TensorRT, and ROS-based perception models on NVIDIA Jetson. Develop custom test frameworks and automation scripts for validation. Cross-functional Collaboration & Documentation Work closely with software developers, system architects, and hardware engineers. Provide technical reports, validation summaries, and defect analysis documentation. Participate in customer discussions and requirement analysis. Work Experience 6-8 years of experience in embedded validation, preferably in ADAS and perception systems. Strong hands-on experience with dSPACE Scalexio, NVIDIA Jetson (Xavier/Orin), and MATLAB/Simulink. Experience with HiL/SiL/MiL testing and validation tools. Expertise in Python, C++, MATLAB scripting, and automation frameworks. Familiarity with AUTOSAR, ROS, and functional safety standards (ISO 26262). Experience with CANoe, CANalyzer, and automotive communication protocols (CAN, Ethernet, LIN). Strong debugging skills with JTAG, debuggers, and real-time OS profiling tools. Preferred Qualifications Experience in AI/ML model validation and deep learning-based perception. Hands-on with Docker, TensorRT, OpenCV, and CUDA optimizations. Show more Show less

Responsibilities: Define specifications and requirements for product hardware. Conduct hardware design and firmware control reviews with a focus on high-level system integration. Monitor development and create test plans to verify electrical, environmental, and functional compliance. Perform FMEA (Failure Modes and Effects Analysis) to evaluate reliability and ensure there are no safety or liability concerns related to the product. Coordinate and track product development milestones with the project manager and cross-functional teams (CFTs). Oversee DFX (Design for Excellence) updates, Engineering Change Notices (ECNs), and product life cycle management. Mentor the team on design to ensure that established technical standards are adhered to during product development. Research new development concepts to guide future product innovation. Identify cost-competitive technological alternatives that are suitable for scaling up. Validate design concepts through a combination of circuit simulations and prototyping. Prepare documentation, including bills of materials, circuit diagrams, simulations, design-related documents, and FMEAs. Desired Qualifications and Skills: Master’s degree in Power Electronics with 8-12 years of experience. Strong understanding of closed-loop control for power converters and compensator design. Experience with high-speed or high-power semiconductor devices, specifically power converter designs over 100kVA and in medium voltage applications. Solid technical knowledge, competence, and system-level design experience. Proven track record of managing multiple power electronics projects involving analog and digital electronics as well as control circuitry. Experience in EMI (Electromagnetic Interference) filter design and product qualification/compliance testing. Familiarity with circuit simulation tools like SIMULINK. Skills in derating, FMEA, and reliability analysis. Excellent circuit debugging and troubleshooting capabilities. Experience in writing technical documents such as hardware requirements, product design specifications, test specifications, and board-level design details. Strong knowledge of component selection and system integration. Good communication skills in English, both spoken and written. Experience mentoring small teams with strong decision-making capabilities and the ability to work effectively in an agile product development model. What can you expect: Experience with the latest technologies in power converters for applications involving grid connections and renewable energy. A supportive environment that enhances your design and debugging skills. Collaboration with a team of motivated and enthusiastic engineers. Show more Show less

Job Title: Firmware Engineer I/II Location: Noida Experience: 35+ Years Industry: Medical Devices / Embedded Systems Job Type: Full-time | Job Summary: We are seeking a passionate Firmware Engineer (I/II) to join our innovative R&D team. The role involves developing cutting-edge embedded firmware for hearing devices and accessories. You will collaborate on both New Product Development (NPD) and Advanced Development Projects (ADP), tackling complex technical challenges while ensuring reliable and high-quality firmware solutions. Key Responsibilities: 1. Requirements Gathering & Analysis: Understand and contribute to system-level firmware requirements. Collaborate across teams to define and align design requirements. 2. Firmware Design & Development: Design and implement efficient firmware using C or Assembly for embedded systems. Work on resource-constrained hardware (e.g., ARM, TI processors, DSP). Follow structured development practices: code reviews, version control, documentation. Resolve firmware issues and document technical findings. 3. Firmware Verification & Testing: Develop and review test plans; conduct unit and integration testing. Work closely with the verification team to ensure product quality. 4. Project Collaboration: Participate in Agile/Scrum processes: sprint planning, daily stand-ups, and reviews. Provide estimates and report progress against milestones. 5. Additional Responsibilities: Mentor junior engineers and create learning resources. Lead process improvement initiatives. Support QA and system verification efforts. Required Education & Experience: Bachelor’s or Master’s in Electronics & Communication, Computer Science, Embedded Systems, or related. 3+ years (MS) or 5+ years (BS) of relevant embedded firmware development experience. Technical Skills: Strong in C/Assembly programming for embedded systems. Knowledge of Digital Signal Processing (DSP): filtering, FFT, adaptive filtering, etc. Experience with RTOS (e.g., FreeRTOS, VxWorks). Familiarity with tools: MATLAB/Simulink, JTAG, oscilloscopes, IDEs like Keil, IAR. Communication protocols: wired and wireless. Exposure to integrating Machine Learning with DSP (TensorFlow, PyTorch, Keras). Soft Skills & Competencies: Strong communication and documentation skills. Analytical mindset with attention to detail. Team player with a proactive and collaborative approach. Bonus: Knowledge of audio signal processing, hearing technology, or healthcare-related devices.

Career Area: Engineering : Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Associate Engineer - Controls Development - Electrification + Energy Solutions To direct and participate in the concept and design of controls systems for Electrification + Energy Solutions and in a manner to ensure products provide superior performance, durability, quality, serviceability at the most affordable cost. Controls engineer with experience developing and testing control logics that interfaces closely with Invertors, Converters and Chargers. The role will be responsible for controls development for Electrification + Energy Solutions working with a global team. A strong understanding of power electronics and power systems controls is required. Job Duties/Responsibilities may include, but are not limited to Determining detailed functional requirements for power conversion systems (inverters, converters and chargers), reviewing the technical documentation to determine compliance with requirements and evaluate technical characteristics. Develop and test control system algorithms for inverter, converter and chargers. Provide inputs to the software team on controls integration into Electrification products Develop and architect control logic, simulate plant models with controller. Develop tests, standardized test procedures, and perform product testing, including involvement in hands on Hardware-In-Loop lab testing during evaluations of prototype systems. Analyse operational and test data to troubleshoot and resolve system problems. Work with field engineers for rapid solutions to field issues Collect and provide the required documentation for internal stakeholders to allow for standardized deployment for power conversion controls of inverters, converters and chargers. Knowledge of the NPI process. Basic Qualifications Master s candidates in Electrical Engineering with experience in Controls systems design, development and validation of electrification products utilizing technology like fuel cell power sources, energy storage systems, hydrogen fuel cells, hybrids, electric vehicles (EV), etc and functional validation testing Knowledge of Invertors/Chargers or similar Electrical Component product Controls - design, development, Validation and testing. Experience in electrical product and software testing. Working /Operating knowledge of HiL-OPAL or dSPACE benches High level of proficiency in MATLAB/Simulink Excellent Verbal and Written Communication Skills Excellent analytical and communication skills Self-starter with strong technical leadership skills Top Candidates Will Also Have Advanced knowledge of Controls development of Inverters, Chargers controls with a focus on strategies development for various product operations scenarios Advanced knowledge of Matlab / Simulink with a focus on automation of simulation and code-generation for embedded platforms Working knowledge of Power Electronics design and simulation, focussing on different converter topologies, thermal simulations, etc Advanced knowledge of the model-based software development, MIL/SIL/HIL based validation, and embedded software development Knowledge and usage of Hardware-In-Loop Systems for controller software design, development, verification, and validation. Willingness to travel domestic/international up to 10% when job role requires Posting Dates: May 19, 2025 - June 5, 2025 Caterpillar is an Equal Opportunity Employer. Not ready to applyJoin our Talent Community .

Career Area: Engineering : Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Engineer - Engine Performance & Simulation As an Engineer in the Power Solutions & Controls Development team within LPSD, you will serve as: An experienced individual contributor on complex projects and assignments for the end-to-end design and development of large diesel, dual-fuel and gas engines focussed on alternate fuels including Methanol, Hydrogen and others. This will involve utilizing thermodynamic cycle simulation and other engineering analysis tools to efficiently communicate results to team members and making program decisions. You will also perform engine test data analysis, results review and documentation, project management planning and updates. Mentor and develop other engineers in the team. Basic Qualifications: Bachelor s degree in Mechanical/Automobile/Aerospace Engineering from accredited Indian or Global Engineering schools Overall experience of 8 years in Engine performance, simulation and controls development 3+ years of experience developing engine systems for diesel, gas, and dual fuel engines with specialization in alternate fuels including Methanol, Hydrogen and others. Executing engine performance and simulation work using 1D combustion/thermodynamic tools Extensive experience in GT-Power/Dynasty, Matlab/Simulink, Vector CANape, and their application in gas/diesel/dual fuel engine development. Requires strong technical leadership skills who has the ability to communicate technical information effectively with team members and others in the work group, as well as employees in other units, customers and suppliers Must have demonstrated excellent analytical skills and have an extensive understanding of complex engineering concepts and applications Perform needs analysis and initiate ideas, create/evaluate new processes and perform complex analysis work, identify and solve challenging problems Create and deliver technical reports. Flexible to travel globally which is of 10% of the work Top Candidates Will Also Have: PhD/Masters degree in an accredited Indian or Global Engineering schools Proficiency with engine controls development Basic proficiency in German language Excellent analytical skills Ability to perform complex assignments Self-starter with strong technical leadership skills Working knowledge of Python/VBA to automate tasks Enjoys working in a fast paced, technically challenging environment This is intended as a general guide to the job duties for this position and is intended for the purpose of establishing the specific salary grade. It is not designed to contain or be interpreted as an exhaustive summary of all responsibilities, duties and effort required of employees assigned to this job. At the discretion of management, this description may be changed at any time to address the evolving needs of the organization. It is expressly not intended to be a comprehensive list of essential job functions as that term is defined by the Americans with Disabilities Act." Relocation is available for this position. Posting Dates: May 28, 2025 - June 10, 2025 Caterpillar is an Equal Opportunity Employer. Not ready to applyJoin our Talent Community .