22 Shift Engineer Jobs

Role & responsibilities Manage and maintain electromechanical / utilities services at the site with the help of technician team. Prepare and implement planned preventive maintenance (PPM). Conduct inspections at site regularly to check for risk / defects areas. Review work of subordinate staff and provide guidance when needed. Ensuring the documentation, checking and follow up of the assets under defect liability period and AMC/CAMC in a tracker. Maintaining service level agreements and keeping performance indicator scores above excellence. Overseeing all vendor quotations and invoices. Ensure proper signoffs for attendance and all the required details for cost sheet submission. Schedule monthly vendor meeting to discuss on daily matters & ensure corrective actions are taken for the same. Planning and implementing for energy conservation. Prepare monthly readings sheet with occupants and ensure all check-sheets and logbooks are being filled properly as per the schedule Maintain history cards for all equipments. Attend major complaints & escalate to senior & co-ordinate with technical staff if necessary. Ensure work permits are in place and safe working practices /procedures are followed. Assist the Property Manager/ Assistant Property Manager/ Technical Manager in conducting risk assessment of the building operations and work towards mitigation of highlighted inherent risks and in conducting root cause analysis in case of system failure and breakdowns. Create corrective, preventive and emergency response action plans. Take part in evacuation Drills and be a part of ERT/QRT team. Maintain engineering and other reports like DMR and MMR. Facilitate the services under the Slogan “No Safety No Work”.

You will be ensuring that all technical services are maintained operational during your shift duty. Taking charge of entire technical assets in building, managing engineering team and supporting the Property Manager / Assistant Property Manager your team leader for coordinating for technical issues with client and occupants. Your key deliverables will be to: Manage and maintain electromechanical / utilities services at the site with the help of technician team. Prepare and implement planned preventive maintenance (PPM). Conduct inspections at site regularly to check for risk / defects areas. Review work of subordinate staff and provide guidance when needed. Ensuring the documentation, checking and follow up of the assets under defect liability period and AMC/CAMC in a tracker. Be responsible for hiring, training and development of shift engineers and maintenance staff. Formulating suitable budgeting controls and Monitoring SLA s & KPI s for JLL and outsourced agencies towards effective service deliverance. Maintaining service level agreements and keeping performance indicator scores above excellence. Ensuring timely renewal of the agreement, submission of invoices and follow-ups for the payments. Overseeing all vendor quotations and invoices. Ensure proper signoffs for attendance and all the required details for cost sheet submission. Ensuring timely submission of client approved cost sheet to JLL office and following up for the invoice. Schedule monthly vendor meeting to discuss on daily matters & ensure corrective actions are taken for the same. Planning and implementing for energy conservation. Prepare monthly readings sheet with occupants and ensure all check-sheets and logbooks are being filled properly as per the schedule Maintain history cards for all equipment s. Attend major complaints & escalate to senior & co-ordinate with technical staff if necessary. Ensure work permits are in place and safe working practices /procedures are followed. Assist the Property Manager/ Assistant Property Manager/ Technical Manager in conducting risk assessment of the building operations and work towards mitigation of highlighted inherent risks and in conducting root cause analysis in case of system failure and breakdowns. Create corrective, preventive and emergency response action plans. Take part in evacuation Drills and be a part of ERT/QRT team. Maintain engineering and other reports like DMR and MMR. Work closely with the regional RO / HO / SME/ Training teams and ensure closures of all required reports. Facilitate the services under the Slogan No Safety No Work . Reporting: You will be working with our operations team and reporting to the Building Manager / Technical Manager. Sound like youHere is what we re looking for: Being Analytical and Meticulous Your role will involve coordination with various teams. You will be paying attention to detail and have excellent problem-solving skills. You will be using logic to trouble shoot problems; and assign and monitor maintenance projects. You should have a good knowledge of the working procedures. Qualifications You will have a Degree / Diploma in Electrical/Mechanical OR any equivalent, with min 3-5 years of work experience in Real Estate/ Hotel or Construction Industry. For residential sites candidates with residential experience will be preferred.

Dalmia Cement Bharat Ltd is looking for Shift Engineer to join our dynamic team and embark on a rewarding career journey. A Shift Engineer, also known as a Shift Technician or Maintenance Engineer, is responsible for overseeing the operations and maintenance of equipment, systems, and facilities during a specific shift. Their role involves monitoring, troubleshooting, and maintaining the smooth functioning of machinery and infrastructure. Here are some key responsibilities of a Shift Engineer : Equipment Monitoring and Maintenance : Shift Engineers continuously monitor the performance of equipment, machinery, and systems within their assigned area. They conduct regular inspections, perform preventive maintenance tasks, and address any issues or malfunctions that may arise. This includes repairing or replacing faulty components, conducting routine lubrication and calibration, and ensuring equipment is operating within specified parameters. Troubleshooting and Repair : When equipment malfunctions or breaks down, Shift Engineers are responsible for diagnosing and troubleshooting the problem. They use their technical expertise and problem-solving skills to identify the root cause of issues and implement effective solutions. This may involve repairing or replacing faulty parts, adjusting settings, or coordinating with external contractors for more complex repairs. Safety and Compliance : Shift Engineers ensure compliance with safety protocols and regulations. They conduct regular safety inspections, identify and address potential hazards, and take corrective actions to mitigate risks. They also follow standard operating procedures and adhere to relevant regulations and guidelines. Emergency Response : In the event of an emergency or equipment failure, Shift Engineers are responsible for taking immediate action to resolve the issue. They assess the situation, implement emergency procedures, and coordinate with other team members or external resources to minimize downtime and ensure the safety of personnel and equipment. Record Keeping and Documentation : Shift Engineers maintain accurate records of maintenance activities, equipment performance, repairs, and other relevant information. They document work orders, log maintenance activities, update equipment manuals, and create reports on equipment downtime, maintenance costs, and productivity metrics.

Design and implement manufacturing processes: Manufacturing engineers design and implement manufacturing processes, analyzing present processes and identifying areas for improvement. Create new manufacturing technologies and methods: Manufacturing engineers constantly explore new manufacturing technologies and methods to stay updated in the competitive market. They evaluate and research innovative techniques to improve production quality and efficiency. Optimize cost-effectiveness and production efficiency: One of the major goals of manufacturing engineers is optimizing cost-effectiveness and production efficiency. They analyze data, identify bottlenecks, and leverage strategies to streamline processes and minimize waste. Boost product quality and align with safety regulations: Manufacturing engineers ensure that products align with quality standards and comply with safety regulations. They implement and develop quality control processes and run regular inspections to address problems. Collaboration with cross-functional teams: Manufacturing engineers collaborate with cross-functional teams, such as production managers, design engineers, and technicians, to address specific production problems. They offer guidance and technical expertise to implement practical solutions to solve problems. Leverage regular improvement initiatives: Constant improvement is a major aspect of manufacturing engineers. They identify improvement opportunities, leverage changes and check the results to track efficient progress.

Candidates must have 5 Yrs experience in Plastics injection molding. Salary: As per experience. Interested & Suitable candidates directly call us on +91 9157895300

Role: OTT WABA - Tech Support Shift Engineer Job Location : Mohali Roles and Responsibilities End-to-end WABA onboarding in coordination with BSP, clients and internal Sales team in line with Turnaround Time. Monitor WABA platform operations, ensuring system stability, performance. Perform troubleshooting and root cause analysis for WABA related issues, coordinating with BSPs and internal teams as needed. Responsible for CRMs integrations with WABA services. Respond to alerts, incidents and service requests related to WABA services. Work in a shift-based rotation to provide continuous monitoring and support to customers. Experience & Skillset Required B. Tech (CSE or IT) or BCA, and an additional internship in a similar field will be good. 1+ year of experience in telecom messaging platforms, WABA, RCS or SMS services is required. Decent knowledge of WABA operations, protocols (HTTP APIs), and messaging standards. Knowledge of WABA solutions and APIs. Ability to work in a shift-based schedule, including weekends if + when needed. Excellent problem-solving skills and attention to detail. Strong communication and teamwork skills with a professional eco-system.

Greetings of the Day !! We are having opening for Shift Engineer/ Technical Supervisor at Dadar Location . Role Description: To manage all the site services and to comply with the agreed objectives and standards and to develop a teamwork philosophy with the Client Deploy team resources in most effective & safe manner to achieve the agreed service levels and objectives Key Responsibilities Going for walk-around of the facility every day. Check the all Critical equipment parameters and noted. Review the Daily report and sent to Client and Operations. Check all the log register. Facility inspection carried out and report prepare as per planned. Checks the Inspection report are closed. Following with AMC vendor and complete the PM services 100%. Prepare & review weekly report and send to client. To organize collection of data (Fuel, Power, Air, & water) and ensure reporting to on a monthly basis or as per client schedule & prepare MIS report and submit to client. Review EB bill, prepare analysis report and send to client. Follow with Engineers to HK operatives work and monitoring as planned vs. actual and inform to team (improvement if required). To supervise technicians work on allocated area & floors and to be ensuring that work is carried out to the standard as required by the client & as per scope of work. To check on the functions of all critical equipments on a daily basis. Conduct briefings on a regular basis as per set standards. To provide information essential to Management. Technical Induction given to new joiness (if required) Arrange training program and attend with team as planed Check all records are maintained on regular basis Deploy team resources in most effective & safe manner to achieve the agreed service levels and objectives. Prepare RO, PO and Purchase indent, Work requisition (if required) Following the payments for vendor and client Check Job order & Floor Inspection rounds report work are completed within the time line. Complete all complaints / requests are closed. Any minor and major problems discuss with team and escalate to client & Regional Office. Diesel, Petrol & Propane level physical monitoring and as per standard (if found low level escalate to Plant engineering team). Undertaking any job delegated by the Regional Manager. Take active part while trouble shooting in case of breakdowns Issuing work permits and ensures the vendor follow the safety procedures while on the site. Hand on Experience of HVAC, Chillers, Pumps, DG, Transformer, Fire Fighting Assets, Electric panels, etc. Commercial property management experience will be added advantage. Role & responsibilities Preferred candidate profile Should be BE (Electrical / Mechanical) with 4+ yrs of work experience Should possess an eye for detail The person needs to have excellent communication skills, experience in working with a very young and demanding set of employees, having the ability to navigate in unknown circumstances and situations, and needs to connect well with the employees. A very smart, energetic person who is capable of taking initiative and decisions when needed. email id : snehal.madhavi@krystalallied.com Regards , Snehal HR

Must have experience as a setter in auto components manufacturing. Experience: 2-5yrs Key Responsibilities: - Oversee production operations during assigned shift. - Ensure proper setup of machines and tools—must be skilled in machine setting... Required Candidate profile setting. - Monitor workflow, troubleshoot issues, and maintain efficiency. - Coordinate with teams to meet production targets and quality standards. - Enforce safety protocols and adherence to op..

Must have experience as a setter in auto components manufacturing. Experience: 2-5yrs Key Responsibilities: - Oversee production operations during assigned shift. - Ensure proper setup of machines and tools—must be skilled in machine setting... Required Candidate profile setting. - Monitor workflow, troubleshoot issues, and maintain efficiency. - Coordinate with teams to meet production targets and quality standards. - Enforce safety protocols and adherence to op..

Must have experience as a setter in auto components manufacturing. Experience: 2-5yrs Key Responsibilities: - Oversee production operations during assigned shift. - Ensure proper setup of machines and tools—must be skilled in machine setting... Required Candidate profile setting. - Monitor workflow, troubleshoot issues, and maintain efficiency. - Coordinate with teams to meet production targets and quality standards. - Enforce safety protocols and adherence to op..

Must have experience as a setter in auto components manufacturing. Experience: 2-5yrs Key Responsibilities: - Oversee production operations during assigned shift. - Ensure proper setup of machines and tools—must be skilled in machine setting... Required Candidate profile setting. - Monitor workflow, troubleshoot issues, and maintain efficiency. - Coordinate with teams to meet production targets and quality standards. - Enforce safety protocols and adherence to op..

Candidates must have 5 Yrs experience in Plastics injection molding. Writing Instruments candidates 01st preferred. Salary: As per experience. Interested & Suitable candidates directly call us on +91 9574220100

Greetings of the Day !! We are having opening for Shift Engineer at Goregaon Location . Role Description: To manage all the site services and to comply with the agreed objectives and standards and to develop a teamwork philosophy with the Client Deploy team resources in most effective & safe manner to achieve the agreed service levels and objectives Key Responsibilities Going for walk-around of the facility every day. Check the all Critical equipment parameters and noted. Review the Daily report and sent to Client and Operations. Check all the log register. Facility inspection carried out and report prepare as per planned. Checks the Inspection report are closed. Following with AMC vendor and complete the PM services 100%. Prepare & review weekly report and send to client. To organize collection of data (Fuel, Power, Air, & water) and ensure reporting to on a monthly basis or as per client schedule & prepare MIS report and submit to client. Review EB bill, prepare analysis report and send to client. Follow with Engineers to HK operatives work and monitoring as planned vs. actual and inform to team (improvement if required). To supervise technicians work on allocated area & floors and to be ensuring that work is carried out to the standard as required by the client & as per scope of work. To check on the functions of all critical equipments on a daily basis. Conduct briefings on a regular basis as per set standards. To provide information essential to Management. Technical Induction given to new joiness (if required) Arrange training program and attend with team as planed Check all records are maintained on regular basis Deploy team resources in most effective & safe manner to achieve the agreed service levels and objectives. Prepare RO, PO and Purchase indent, Work requisition (if required) Following the payments for vendor and client Check Job order & Floor Inspection rounds report work are completed within the time line. Complete all complaints / requests are closed. Any minor and major problems discuss with team and escalate to client & Regional Office. Diesel, Petrol & Propane level physical monitoring and as per standard (if found low level escalate to Plant engineering team). Undertaking any job delegated by the Regional Manager. Take active part while trouble shooting in case of breakdowns Issuing work permits and ensures the vendor follow the safety procedures while on the site. Hand on Experience of HVAC, Chillers, Pumps, DG, Transformer, Fire Fighting Assets, Electric panels, etc. Commercial property management experience will be added advantage. Role & responsibilities Preferred candidate profile Should be BE (Electrical / Mechanical) with 4+ yrs of work experience Should possess an eye for detail The person needs to have excellent communication skills, experience in working with a very young and demanding set of employees, having the ability to navigate in unknown circumstances and situations, and needs to connect well with the employees. A very smart, energetic person who is capable of taking initiative and decisions when needed. email id : snehal.madhavi@krystalallied.com

Role & responsibilities Job Opportunity Position :- Shift Engineer Total Years of Experience :- 4+ Electrical background. B.E/ Diploma in Electrical. Nos of Experience: 3-8 Years. HVAC Experience is must.

Maintenance of utility equipment-ETP/STP,DG set,Compressor,HVAC each Shift on all working day for taking care of all activities/Operation/maintenance Daily round of the Complete area covered under scope Preparing52 WeekPMschedule as per scope of Work Required Candidate profile Maintenance activities incudes: Preventive Maintenance (Scheduled, Critical or Chance) Predictive Maintenance (Time/condition Based Main.-Look, Listen and feel) Failure and root cause Analysis

Svis Labs Ltd. is looking for Shift Engineer to join our dynamic team and embark on a rewarding career journey A Shift Engineer, also known as a Shift Technician or Maintenance Engineer, is responsible for overseeing the operations and maintenance of equipment, systems, and facilities during a specific shift Their role involves monitoring, troubleshooting, and maintaining the smooth functioning of machinery and infrastructure Here are some key responsibilities of a Shift Engineer:Equipment Monitoring and Maintenance: Shift Engineers continuously monitor the performance of equipment, machinery, and systems within their assigned area They conduct regular inspections, perform preventive maintenance tasks, and address any issues or malfunctions that may arise This includes repairing or replacing faulty components, conducting routine lubrication and calibration, and ensuring equipment is operating within specified parameters Troubleshooting and Repair: When equipment malfunctions or breaks down, Shift Engineers are responsible for diagnosing and troubleshooting the problem They use their technical expertise and problem-solving skills to identify the root cause of issues and implement effective solutions This may involve repairing or replacing faulty parts, adjusting settings, or coordinating with external contractors for more complex repairs Safety and Compliance: Shift Engineers ensure compliance with safety protocols and regulations They conduct regular safety inspections, identify and address potential hazards, and take corrective actions to mitigate risks They also follow standard operating procedures and adhere to relevant regulations and guidelines Emergency Response: In the event of an emergency or equipment failure, Shift Engineers are responsible for taking immediate action to resolve the issue They assess the situation, implement emergency procedures, and coordinate with other team members or external resources to minimize downtime and ensure the safety of personnel and equipment Record Keeping and Documentation: Shift Engineers maintain accurate records of maintenance activities, equipment performance, repairs, and other relevant information They document work orders, log maintenance activities, update equipment manuals, and create reports on equipment downtime, maintenance costs, and productivity metrics

Sodexo hiring a Sift Engineer @ Coimbatore Position - Shift Engineer Experience - 2 to 5 years Qualification- ITI / Diplomo in Electrical/BE electrical Salary - 30,000 Gross + 1000 Bonus Candidate must have a C license Interested candidate send your resume in WhatsApp - 7339654170 or mail - ashvitha.c@sodexo.com

Job Description:- 1. Technical Knowledge of Equipment tools, System, Standards and codes. 2. Process, standards and procedures to be followed. 3. Computer Knowledge for report generation. 4. Understanding of panel schematic drawing and protection system. 5. Speed and Accuracy for handling complaints. 6. Problem Identification, System Orientation and mental ability to handle stressful conditions. 7. Analytical and decision making 8. He must be conversant in training of staff and troubleshooting. Qualification:- Degree in Electrical or Electrical & Electronics Engineering with at least 5 years of experience in maintenance works / services in a similar field in an operational 24/7 mission critical environment, or Diploma holder in the same discipline with at least 8 years of experience.

Assemble, install, test and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures using hand tools and power tools Diagnose malfunctioning systems, apparatus and components using test equipment Required Candidate profile Connect the wires/cables to circuit breakers, transformers or other components. Inspect electrical systems, equipment and components to identify hazards, defects capitalplacement02@gmail.com

Maintenance and Operation L.T, HT & EHT Panel. Maintenance and Operation of D.G Set, Transformer, HVAC Plant, all firefighting system and plumbing system, single phase & three phase induction motor, WTP Plant, STP Plant. Required Candidate profile ITI Electrical with 5-7yrs Experience in same profile can also Appy

Operation and Maintenance of DG set LT Panels HT Panels, Capacitor Panel, PLC Panel ,HVAC System, BMS etc ITI/Diploma Electrical are eligible

HT/LT SubstationDistribution System-Operation & Maintenance DG Sets-Maintenance Transformer-Operation & Maintenance Power Generation Plant with PLC Control & Synchronization System, HVAC SystemChiller Plant, Hot Water Generator,VFD Controls,AHU,FCU Required Candidate profile Knowledge of basic computer System MS Office, excel, word All types of A/Cs (Window, Split, Package & Precession Type), Centralized UPS, UPS’s Operation