247 Sat Jobs - Page 9

Responsibility for the interpretation of customer requirements and specifications, applicable standards, accepted engineering practices leading to the timely design and creation of: Flow Computer, Metering Supervisory Computer (MSC), or PLC programs / configurations (as required) with generation of associated documentation; peer checking and testing the work of other team members; for Metering computer, measurement and control systems for Oil & Gas applications, with occasional installation and commissioning at the customer worksite Typical Activities/Responsibilities: Plan, schedule, conduct and co-ordinate assigned engineering work - to produce, co-ordinate and comment, as necessary; agreed contract SDRL documentation in accordance with agreed list; or revert to others, as necessary. To produce Project documentation in accordance with agreed SDRL submission date (e.g.: SBD, FDS, ATM, OMM, SAT, I&CManual, Loop Diag, GAs etc.). Create and or revise Metering Computer / Supervisory configurations where qualified or suitably experienced to do so. Responsibility for the overall engineering and technical execution when solely assigned to small project(s). Provide peer checking function on the output of other team members to ensure technical accuracy (only on areas where qualified or suitably experienced to do so). Maintain Swinton design intent, interpret client specifications accepted engineering practices and code requirements to facilitate accurate translation into technical output. To ensure all approved documents are correctly recorded to the project and issued through document control. Host metering computer systems client witness test during factory acceptance test (FAT) Test metering computer systems according to approved test procedures/acceptance test manuals (ATM) Compile and accurately record all systems problem reports (SPR) onto the Company s central database (MIS) Ensure tight change control or any client requested deviations or variations with due notification to the Lead Project Engineer / Manager prior to commencement of any works. Attend client / vendor meetings (KoM etc.) to achieve the agreed project goals. To liaise with vendors on technical issues and project matters Provide technical support to the sales team to assist with the generation of technical tenders, etc. including generation of detailed comments and exceptions. Demonstrate leadership and commitment in promoting compliance with company quality and HS&E procedures. To work in accordance with the Company s standard operating procedures. Any other duties as reasonably required by the company . The above list of typical activities/responsibilities for the role of Project Engineer is not exhaustive and therefore you will be expected to carry out further duties as may be consistent with the role of Project Engineer or as may be a reasonable instruction or expectation by your employer. Skills and Personal Qualities: Ability to work as a team member Possess key decision-making skills and an ability to effectively communicate information to both internal and external customers. Ability to work using own initiative Driven and goal orientated Innovative and focused on improvements Expected to meet demanding schedule requirements whilst maintaining the highest quality standards; you will therefore be versatile and motivated. As part of a flexible project engineering team, you are expected to be self-motivated, independent and in most part self - managed. You must be well organised and methodical. You must be confident and self-assured to establish relations and networks with people both inside and outside the organisation whilst ensuring your priority of delivering a compliant solution to customers. You will possess a customer focused attitude understanding priorities and times critical tasks You must be personable, extremely professional and in possession of excellent communication skills in English Language (verbal and written) Qualifications and Experience: Educated to degree level or equivalent in an engineering discipline or equivalent relevant experience, HNC / HND may be acceptable Familiar with design and implementation of Metering Computer & Software Systems (configuration & Programming) and/or Control / instrumentation systems design & build. Must have working knowledge of one or more of the following (Flow Computer & Supervisory): Emerson, Omni, FlowX, EXI, Honeywell (DCS/ Metersuite), PLC, CiTECT, GeM. Experience in working on multi discipline engineering projects. General awareness and appreciation of the Oil & Gas industry (Metering Computing) Experience of working in a customer facing role Commercial and contractual awareness is preferred but not essential Computer literacy: Microsoft Office: outlook, word and excel (minimum)

As a Customer Coordination Commissioning Engineer, you will act as the primary point of contact for customers, ensuring smooth communication and successful project commissioning. You will be responsible for managing commissioning activities, troubleshooting, and ensuring timely execution of automation and control system projects. Key Responsibilities: Act as the liaison between customers and internal teams to ensure project milestones are met. Plan, execute, and oversee the commissioning of control systems (PLC/DCS/SCADA). Conduct site walk-downs, system testing, and verification of I/O interfaces. Support customers in understanding system functionality and troubleshooting issues. Coordinate with engineering teams for logic simulation, system integration, and testing. Assist in Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT). Ensure compliance with safety and quality standards during commissioning. Document commissioning processes and report project status to stakeholders. Provide post-commissioning support and customer training on system operations.

Job Role: Customer Success Associate Work Mode: Work From Office Nature of Account: Insurance Working Days: 6 Days (Mon - Sat) Location: Kharadi, Pune Key Responsibilities: Make outbound calls to interested leads and provide product information. Understand customer needs and recommend appropriate insurance solutions. Build rapport with customers and maintain a high level of customer satisfaction. Maintain accurate and up-to-date customer records and call details. Achieve daily/weekly/monthly targets as assigned by the team leader. Collaborate with internal teams to resolve queries and ensure customer delight. Required Skills: Excellent communication skills in English and Hindi (spoken and written). Strong interpersonal and persuasion skills. Good listening and problem-solving skills. Ability to multitask and manage time effectively . Eligibility Criteria: Educational Qualification: Graduate from any field. Experience: Freshers are welcome & Experienced candidates, especially with insurance or sales background, are preferred. Language Proficiency: Must be fluent in English & Hindi. Salary Package: Freshers: 20,000 - 25,000 CTC per month Experienced Candidates: Up to 29,000 CTC per month Work Schedule: Females: Day shift only (up to 8 PM) Males: Rotational shifts ,

Who we are At Twilio, we re shaping the future of communications, all from the comfort of our homes. We deliver innovative solutions to hundreds of thousands of businesses and empower millions of developers worldwide to craft personalized customer experiences. Our dedication to remote-first work , and strong culture of connection and global inclusion means that no matter your location, you re part of a vibrant team with diverse experiences making a global impact each day. As we continue to revolutionize how the world interacts, we re acquiring new skills and experiences that make work feel truly rewarding. Your career at Twilio is in your hands. See yourself at Twilio. Join the team as our next Technical Support Engineer 2 (Email) About the job This position is needed to support our customers use of the Twilio platform, and help customers get the best experience from Twilio s products. You will function as the voice of Twilio to our customers and partners, and operate as a subject matter expert for Twilio s APIs and SDKs. This role reports to a Manager, Technical Support and will be based in our new Bengaluru office. This position requires working in a shift. The current shift timings for shift based roles supporting our EMEA customers is 12:30PM -9:30 PM or 1:30PM - 10:30PM IST. This position also includes rostering. Rosters will be of a 5 day work week, and could include one or both weekend days. (Mon-Fri, Tue-Sat or Sun-Thu). Responsibilities In this role, you will: WEAR THE CUSTOMER S SHOES: Use your strong technical and diplomatic skills to address customer issues and provide customer feedback to Twilio s Product and Engineering teams. Be ready to assist our customers when they need us. This position may require working an irregular shift, including the weekend (Shifts are subject to change based on evolving team and customer needs). BE INCLUSIVE: Work with our customers and partners developers, architects, and support personnel to resolve complex problems with potentially very costly and far-reaching consequences. BE AN OWNER: Collaborate with your teammates and the Twilio Product and Engineering teams via Slack as well as filing JIRAs to report reproducible bugs. WRITE IT DOWN: Review and contribute to internal knowledge bases and external technical resources to stay current on industry shifts and standards. Qualifications Required Deep understanding of Email infrastructure such as Mail User Agent(MUA) Message Transfer Agent (MTA) Good knowledge of RESTful technology, previous work with APIs and ability to understand and solve issues with cloud solutions. Good understanding of protocols - encryption-based Internet security protocol such as SSL, TLS and Communication protocol SMTP. Bonus: Knowledge on Email protocols POP3 and IMAP and Client- Server protocol such as Tenet would be a HUGE plus. Skills in troubleshooting network connectivity issues, with an understanding of TCP/UDP, and basics of SSL/TLS. High competency in communicating complex technical issues to both technical and non-technical audiences via phone or email mediums. Ability to stand in the customer s shoes and demonstrated dedication to the customer experience. Excellent written and verbal communication skills. Excellence in task prioritization and evaluation of situational urgency. Desired Advanced time management skills, ability to work well under pressure, and proficiency at developing workflows to increase troubleshooting efficiency while still following standard processes and procedures. Ability to influence and build effective working relationships with all levels of the organization. Interest in utilizing customer feedback to identify and drive improvements in our products. Basic understanding of Curl command, Webhook. Basic SQL knowledge to query data from snowflake Location This role will be remote, based in India (Karnataka, Maharashtra, New Delhi, Tamil Nadu, Telangana) What we offer There are many benefits to working at Twilio, including things like competitive pay, generous time-off, ample parental and wellness leave, healthcare, a retirement savings program, and much more. Offerings vary by location. Twilio thinks big. Do you? We like to solve problems, take initiative, pitch in when needed, and are always up for trying new things. Thats why we seek out colleagues who embody our values something we call Twilio Magic . Additionally, we empower employees to build positive change in their communities by supporting their volunteering and donation efforts. So, if youre ready to unleash your full potential, do your best work, and be the best version of yourself, apply now! If this role isnt what youre looking for, please consider other open positions . Twilio is proud to be an equal opportunity employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, reproductive health decisions, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, genetic information, political views or activity, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Additionally, Twilio participates in the E-Verify program in certain locations, as required by law. Twilio is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, please contact us at accommodations@twilio.com .

Develop Safety System Design Perform I/O to Safety Logic Solver Assignment Define Software Concepts FAT , SAT exp is must Define third party interfaces (eg. Addressable FGS.)

Securing major statutory approvals, streamlining project timelines. Prepare and submit the applications for Pre-commissioning approvals for Transmission Line (Section-68, Section-164, PTCC, Forest NOC, MoD, Power Line Crossing, Civil Aviation etc). Transmission Line, Solar Power Plant and Switchyard Charging Approvals (CEA Energization Approval, RLDC Registration, Format-A, Format-B) Connectivity Agreement with RE developer, CTU and ISTS (FORMAT-CONN-TD-4, Connectivity Agreement Cat-1 and Cat-2) Skilled in Transmission Line design engineering up to 400kV and 220kV. Transmission Line tower design, BOQ/BOM finalization. Coordination with MoP, CEA, CTU, Grid India and Transmission Line/EPC contractor for timely execution of projects. knowledge in Transmission & Distribution System Operation & Maintenance.

Ballestra India is looking for passionate individuals willing to associate themselves with the growing organization in India. Role Purpose: Development of Process Control documents with respect to P&IDs, Process Specification. Understanding Instrumentation Details, Electrical Schematics, Communications Network Architecture, to include in the Process Control documents. Knowledge on Multiple PLC - SCADA Platforms, Understanding the communication Protocols, Deep understanding of PLC logic functions. Review of Vendor documents, Customer specifications, and suggest the Standards. Ability to travel to the site in order to discuss with the customer and other stakeholders about the PLC/DCS-based Automation solutions. Essential Functions & Responsibilities: Process Controls Document Preparation I.e. Control Philosophy, Operation sequence Chart, Cause and Effect, interlock list, Alarm list etc. Preparation of Closed control loops and Control Logic Diagrams for plant operations Coordination with other engineering departments, Supporting Package equipment procurement, Interface and networking Concept for Offsite Control System Understanding fundamentals of fluid mechanics and Functions of Equipment i.e, Pumps, Blowers, and instruments Vendor Document Review and coordinating with the vendor to include required controls and safety requirements in process documents. Coordinating with the Automation Engineer for the implementation of Controls as per the Standards and Requirements. Participate in Process Design Review Meeting, P&ID Review meetings and provide input, understanding requirements in terms of Process Controls Attend HAZOP, SIL, and Meetings and provide inputs in terms of Process Controls. Conduct Controls Design reviews on the Projects, along with Process and other department team members. Understanding the customer requirement and developing Standard and Customized Template logics, Screens, faceplate etc, based on the requirement Knowledge of electrical circuits, PLC Panel Drawings, LV motor control centres, the interface of Drives to PLCs, etc. Knowledge of industrial communication protocols like Profinet, Profibus, Ethernet IP, and Modbus is a must. Conducting FAT/SAT for PLC/DCS systems Softwares with Internal and External customers. Specification/MR for I&C (DCS, PLC Field Devices, Final Control Elements, etc.) Other Significant Role Requirements: Lead internal initiatives aimed at collaborating with the cross-functional teams proactively to seek relevant details Proven ability to follow a set of procedures and standards, providing suggestions to new Concepts from established standards Excellent written and verbal communication skills (including liaising, reporting, documentation, and presentations) Experience in working on Cascade Process loops, PID, Recipe Calculations, and complex Algorithms Proven ability to quickly shift focus from one technical issue to another based on the customer's requirement and commitment. Maintaining Standard Process Controls Document Database. Coordinating with Vendors for the PLC/DCS SAT testing and requirements.

Join a team that designs, develops and integrates highly complex systems within Honeywell HBT. You will be integral in creating system solutions that meet the evolving needs of our customers. You will be involved in every aspect of the Project life cycle; from the front end of business development through product end of life. Key Responsibilities Study contract documents/tenders, mechanical plans and evaluate customer requirements Knowledge on field device selection, BACnet and Modbus protocol Technical discussion and meetings with the customer Building Automation System engineering & architecture design Application software development Installation supervision & BMS Commissioning at various sites across Americas, Europe, ME & APAC poles BMS functional testing with the Customer & handover Project Documentation YOU MUST HAVE Bachelor s degree in Engineering Automation /HVAC system engineering /commissioning experience Experience in Pharma (IQ, DQ, OQ, FAT/SAT documentation) will be an addedadvantage WE VALUE Knowledge of HVAC systems, Some Engineering design /Automation /FieldEngineering experience Flexibility to travel to various sites across globe when needed Effective communicator Individuals who are self-motivated and able to work with little supervision Individuals that quickly analyze, incorporate and apply new information andconcepts.

Join a team that designs, develops and integrates highly complex systems within Honeywell HBT. You will be integral in creating system solutions that meet the evolving needs of our customers. You will be involved in every aspect of the Project life cycle; from the front end of business development through product end of life. Key Responsibilities Study contract documents/tenders, mechanical plans and evaluate customer requirements Knowledge on field device selection, BACnet and Modbus protocol Technical discussion and meetings with the customer Building Automation System engineering & architecture design Application software development Installation supervision & BMS Commissioning at various sites across Americas, Europe, ME & APAC poles BMS functional testing with the Customer & handover Project Documentation YOU MUST HAVE Bachelor s degree in Engineering Automation /HVAC system engineering /commissioning experience Experience in Pharma (IQ, DQ, OQ, FAT/SAT documentation) will be an added advantage WE VALUE Knowledge of HVAC systems, Some Engineering design /Automation /Field Engineering experience Flexibility to travel to various sites across globe when needed Effective communicator Individuals who are self-motivated and able to work with little supervision Individuals that quickly analyze, incorporate and apply new information and concepts.

Project Engineering Manager Company: Honeywell Intelligrated Location: India About Us: Honeywell Intelligrated is committed to helping retailers, manufacturers, and logistics providers build smarter distribution and fulfillment operations. By employing the ideal mix of automation, software, and labor, our reliable, high-performance solutions optimize productivity and deliver fast, accurate fulfillment to match the speed of modern commerce. Backed by innovative design, industry-leading automation equipment, and intelligent warehouse execution software, were helping customers make the most of their existing facilities while helping them along their journeys of digital transformation. Role Overview: We are seeking an experienced, detail-oriented, and data-driven engineering manager to join our fast-growing team. In this position, you will play a key role in the overall success of our organization by planning, managing, and developing engineering teams. You will be responsible for overseeing various international automation projects, processes, budgets, and timelines, making any necessary adjustments to ensure successful completion. Mission: D evelop a project engineering team to outperform customer project activities such as Task On-Time Delivery, Technical Maturity, and On-Budget Expenses, while maintaining sustainable customer billability. Execute talent development activities as well as performance assessments to identify top performers and enable them with individual development plans. Key Responsibilities: Establish professional relationships and communications with customers, Program Directors, Operational Leaders, Project Managers, project engineering discipline leaders, concept & estimation, ISC, and Install team leaders. Provide day-to-day consultation, leadership, and direction to the systems engineering group comprising professional engineering staff. Assign Engineering Supervisors and engineers to projects and manage day-to-day resource conflicts. Drive a culture of change identification, change management, technical risk identification & mitigation, value engineering ideas, techniques & solutions within and across the system & project engineering organization. Drive efficiencies in the project execution methodology to bring down cost and/or increase the value delivered to the customer. Develop and enhance work processes and procedures as required. Actively review, monitor, and control the projects health & readiness compliance from the engineering perspective for the phase gate reviews. Ensure 100% compliance to phase gate reviews and all deliverables are submitted to the customer on time. Ensure that required prerequisites (e.g., design inputs, tools, documentation, deliverables, schedule, budget, low-cost engineering content) are in place prior to commencing the work. Drive billability of the engineering group, project cost forecast accuracy, monitor engineering hours & financials to ensure projects are completed within agreed engineering cost budget. Ensure common methods, procedures, techniques, tools, and products as agreed by the knowledge communities/Leaders are being effectively applied and provide feedback for future improvement. Establish and maintain good working relationships with numerous personnel in management and engineering. Escalate customer feedback, internal/external risks, and schedule changes within the organization and work closely with Project Managers/Program Managers for possible mitigation. Ensure customer feedback is collected on all the IGS projects at various customer touch points (KOM, design, Training, SAT, etc.) during project engineering execution. Ensure project teams work in compliance with quality/safety procedures. Responsible for adherence to HSE Policy and Guidelines Qualifications: 8+ years of industrial project engineering experience managing engineering teams. Bachelors degree in Mechatronics, Robotics, Control Automation, Electrical, Electronics, or similar. Masters degree in Engineering, Project Management, or MBA (desired). Strong project management and interpersonal skills, able to develop engineering teams to deliver challenging project milestones while ensuring financial team sustainability and talent development. Competencies: Project Management - Experienced Level Communication - Experienced Level Finance Acumen - Intermediate Level People Management - Experienced Level Collaboration & Teamwork - Experienced Level English - Experienced Level Join us at Honeywell Intelligrated and be a part of a team that is driving innovation and excellence in the field of material handling automation.

Your Role To process Turnkey -EPC Customer Centre orders for Pre order Stage ( enquiry generation till receipt of order stage ) and Post order stage ( Order receipt to site handover) with respect of contractual specifications, delivery time & expected costs ,He/She shall be responsible to handle Drawing and Design activities independantly which includes prepartion of P&ID ,SystemP&ID ,2D,3D Plant Layouts ,Bill of Material ,Site support for installation ,erection and commissioning phase To act as main coordination link between End Customer, Consultant, Licensor, Factory, Supplier & Atlas Copco Customer Centres He/she will be single point contact to End Customer He/she shall be single point responsible person to drive the project smoothly and ensure deliverables are provided on time and lead to successful completion of project To manage orders, achieving client satisfaction in terms of delivery and technical requirements To monitor the overall progress of projects against schedule and milestones reporting to management, as well as providing early warning of potential slippage, in case of the latter To keep management well informed on the high-level aspects of project execution Maintain detailed project files and applicable records in common server ,ic3 platform ,Project on line platform and Project Management System software To prepare project documents for customer centres as per the VDRL and follow up for product company documentation and ensure timely completion of documentation cycle Travel to customer premises or sub-vendor locations as required to ensure smooth execution of project Lead, organize and coordinate the assigned project work during all project phases To propose remedial actions when needed so that the contract completion data for the work is not jeopardized Participate in Site Acceptance Test (SAT) & Factory Acceptance Test (FAT) along with client at factory and vendors premises Provide compliance to customer/ inspection agency on non-conformance & obtain Inspection release note required to dispatch the material Site visit to ensure the actual installation in line with the technical documents/drawings Ensure proper detailed information exchanged with aftermarket team and coordinate when required to ensure safe and smooth start-up and commissioning To succeed, you will need Experience & Educational requirements BE / B Tech in Mechanical engineering with 6 to 9 years of experience in project execution in a EPC- Project Based engineering or product organisation preferably in Compressor ,Pump or in Rotating Machinery Industry Software skill requirement: Must be proficient in - AutoCAD Mechanical, Auto CAD Plant 3D ,Revit ,Inventor professional Micro soft office Tools - MS Excel,word ,Powerpoint, MS VISIO Knowledge:- Sound knowledge and experience on Pumps , Screw & centrifugal compressors Sound Knowledge on Auxiliaries items like Valves ,Pipe & pipe fitting ,Field instruments ,Cooling water pumps ,Cooling tower ,PLC,Electrical panels ,Cables etc Sizing ,selection ,Calculations for Auxiliaries systems like colling water system, Compresed Air syetems ,Ducting , Piping ,Pressure drop calculations , Vetilation ,louvers ,exhaust Fan selection and sizing Knowledge about CFD analysis, Wind Analysis ,Stucture analysis ,Sismic analysis will be an addded advantage Good Command (Verbal & Written) of English is must Able to read , understand,Prepare P&ID, GA, Layouts, Installation, System architect etc Strong Technical & commercial knowledge of Engineered rotatory equipment Able to work under pressure & plan & organize effectively with the right sense of urgency Able to work on multiple projects by giving due importance to each project Working knowledge of ASME/API/TEMA/IEC/IS/DIN/ ATEX/CCOE and other international Codes Strong interpersonal communication Knowledge of pressure vessels and heat exchanger is an added advantage Knowledge of MS Projects is required PMP Certification & Proficiency in Foreign Language will be an added advantage Personality requirements Be able to adapt in a new environment Strong interpersonal communication Willingness to travel within the region and internationally This position is a key interface between customer and company, we are looking for a person with strong personality who can be an active driver In return, we offer you A work culture known for respectful interaction, ethical behaviour and integrity Access to Global Job Opportunities as a part of Atlas Copco Group Opportunities to grow and develop Potential to see your ideas realized and to make an impact City - Pune Last Day to Apply 05/06/2025

JOB DESCRIPTION: QUALITY ANALYST Job Title: Quality Analyst (Manual) Skills Required: Mandatory Knowledge: Manual Testing Knowledge of Unit Testing, Functional Testing, Performance Testing as well as Browser Compatibility and Responsive Testing. Hands on experience of performing Regression Testing and Re-Testing. Hands on experience of creating proper test plans. Hands on experience of creating test cases and bug report. Knowledge of Bug Reporting Tools like Mantis Bug Tracker etc. Should be a self-learner with strong desire to grow in an organization. Should have strong investigation experience and excellent logical skills. Possess strong English communication skills. Have worked with International Clients. Flair in managing international projects. Key Job Responsibilities: Independent testing for the websites/software. Delivery of completed tested projects within the assigned timeline. Follow standard of testing guidelines and best practices. Minimum Experience: 2- 4 Years Location: Gurgaon (Sector 39) Working Days: Mon-Fri (Sat & Sun Off) APPLY FOR QUALITY ANALYST (Manual) Thanks for considering a career at Adreno Technolgies. Please complete the form below so that we can connect with you. First Name * : Last Name * : Email * : Phone * : Upload Resume * : Cover Letter * : Captcha: Rated 4.5 out of 5 based on 930 ratings. |

Job Purpose: The Chief Engineer SCADA is accountable for the end-to-end technical leadership of SCADA systems across infrastructure or industrial projects. This includes system design, selection, procurement, integration, testing, commissioning, operations, and lifecycle optimization. The role ensures that the SCADA system operates safely, reliably, and in compliance with applicable standards while coordinating with all interfacing stakeholders. Key Responsibilities: System Design, Selection & Procurement Lead the technical assessment and selection of SCADA platforms and associated hardware/software. Define system specifications, interface requirements, and technical evaluation criteria for procurement. Oversee vendor selection, procurement process, and contractual compliance with SCADA-related scopes. System Testing & Commissioning Develop and approve Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) protocols. Supervise installation, integration, and commissioning activities to ensure technical and safety compliance. Validate system functionality, cybersecurity posture, and data flow between subsystems. Operations & Safety Management Define and implement operational protocols to ensure safe and reliable SCADA system performance. Support alarm management , fault diagnostics, and real-time system monitoring. Ensure compliance with safety standards, such as SIL (Safety Integrity Level) where applicable. Staffing & Training Plan and oversee staffing requirements for SCADA operations and maintenance teams. Lead the development of training programs and competency frameworks for SCADA engineers and operators. Mentor and upskill in-house engineering talent in SCADA technologies and standards. System Monitoring & Performance Optimization Establish real-time monitoring frameworks for SCADA system performance and uptime. Implement data analytics and reporting tools to support operational efficiency. Continuously review system behavior for optimization, redundancy, and lifecycle upgrades. Safety & Regulatory Compliance Ensure adherence to international SCADA standards (e.g., IEC 60870, DNP3, IEC 62351, ISA standards). Enforce cybersecurity protocols and compliance with industry and national regulatory bodies. Coordinate with HSE and risk teams for audit readiness and incident response. Stakeholder Coordination & Interface Management Interface with other departments (Signaling, Power, Telecom, Operations) and external stakeholders to align SCADA integration. Lead technical coordination meetings , integration reviews, and interface workshops. Reporting & Documentation Maintain complete technical documentation throughout all project phases. Prepare project status reports, incident logs, compliance audits, and performance dashboards for senior management and client stakeholders. Qualifications and Experience: Bachelor’s degree in Electrical, Electronics, Instrumentation, or Control Engineering (Master’s preferred). Minimum 15 years of experience , with extensive SCADA engineering and leadership roles in rail, power, utilities, or industrial automation. Proven experience in: SCADA system architecture and integration Procurement and contract management System commissioning and operational rollout Expertise in SCADA platforms such as Siemens WinCC, GE iFIX, ABB, Schneider, Honeywell, etc. Familiarity with industrial protocols (Modbus, OPC, IEC 61850, DNP3, IEC 60870). Key Skills and Competencies: Strong technical leadership and strategic planning abilities. Proficient in systems integration, fault analysis, and operational diagnostics . Skilled in cross-functional collaboration and stakeholder management. Excellent communication, documentation, and reporting capabilities. Knowledge of project and risk management principles (e.g., FIDIC, PMP). Working Conditions: Based at project site or HQ with travel to vendor facilities or control centers as required. Involves occasional extended hours during testing, commissioning, or incident resolution. Willingness to relocate or travel internationally (for expat roles). Preferred candidate profile Candidate must be from Railways, High Speed Rail ,METRO

~Provide analytical support to Novartis internal customers (CPOs and Regional marketing and sales teams) on a variety of low-medium complexity analytical reports. ~Support and facilitate data-driven decision making for Novartis internal customers by providing and communicating qualitative and quantitative analytics . ~Support the GBS ~GCO business in application creation by being involved in various initiatives such as knowledge sharing, onboarding and training support, support team lead on all business related tasks/activities, process documentation and creation of knowledge repositories. ~Be an integral part of a comprehensive design team responsible for designing promotional marketing materials. Major Accountabilities ~ Build and deliver below client requirements against agreed SLAs. ~ Deliver services through a structured project management approach with appropriate documentation and communication throughout the delivery of services ~ Quality assurance; Ensure outputs are at the highest level for quality and accuracy. On-time project delivery within stipulated timeframes. ~ Support in establishing and maintaining standard operating procedures (SOPs) ~ Support in developing and maintaining knowledge repositories capturing qualitative and quantitative reports. ~ Participate in various knowledge sharing sessions Key Performance Indicators ~ Provide analytical support to Novartis internal customers (CPOs and Regional marketing and sales teams) on a variety of low to medium complexity analytical reports. ~ Support and facilitate data-driven decision making for Novartis internal customers by providing and communicating qualitative and quantitative analytics ~ Support GBS ~ GCO business in application creation by being involved in various initiatives such as knowledge sharing, onboarding and training support, support team lead on all business related tasks/activities, process documentation and creation of knowledge repositories. ~ An integral part of a comprehensive design team responsible for designing promotional marketing materials. Work Experience ~ Pharmaceutical industry experience ~ Project Management ~ Operations Management and Implementation Skills ~ Advertising Campaigns ~ Alteryx (Alternative) ~ Analytical Thinking ~ Brand Awareness ~ Business Networking ~ Curiosity ~ Digital Marketing ~ Email Marketing ~ Marketing Communications ~ Marketing Plans ~ Marketing Strategy ~ Media Campaigns ~ Process Documentation ~ Strategic Marketing

Diploma / bachelor degree / master degree in computer science or subjects related to computer software programming. Minimum 4 years of experience in JavaScript and jQuery development. Proficiency with HTML5, CSS3, and related web technologies. Experience with TypeScript is a plus. Familiarity with libraries like fabric.js and HTML Canvas. Strong problem-solving skills and attention to detail. Excellent communication and teamwork skills. Ability to manage multiple tasks and deliver high-quality results under tight deadlines. Knowledge of React, Angular, or other JavaScript frameworks is an added advantage but not necessary. Benefits Job Timing: Flexible Working Hours 5 days working (All sat & sun Off) Perks: 5 Days Working Flexible working Hours A competitive salary Scope of speedy career growth Supportive & Friendly Work Culture Appreciation cash rewards and certificates Referral Bonus 21 Paid Leaves Friendly Environment On-time Salary Overtime Payment Mostly activities for Refreshment and gain more knowledge Celebrations (Birthday, Festival, Picnic, Movie, Lunch, Dinner, etc.) Chance to lead a team. . Our goal is to help businesses establish a distinctive brand identity, amplify their online presence, optimize workforce management, address recruitment needs, develop custom HR solutions, and leverage technology for sustained growth and success. In today s competitive landscape, Hivekra is your partner for . At Hivekra, we are committed to empowering entrepreneurs by providing insightful solutions that drive value and success. As the first point of contact, you will play a crucial role in establishing a welcoming atmosphere and ensuring seamless communication for clients and visitors. Your responsibilities will include managing inquiries, directing calls, and supporting our team in delivering exceptional service. With a focus on branding, social media marketing, HR services, and recruitment, we invite you to be part of a dynamic environment where your contributions help amplify our clients online presence and optimize their workforce management. If youre passionate about customer service and eager to contribute to a companys mission of driving business success, we welcome you to apply and become an integral member of our team. Tasks Responsibilities & duties: Develop and maintain web applications using JavaScript, jQuery, and HTML Canvas. Work with libraries like fabric.js to create interactive and dynamic web content. Collaborate with cross-functional teams to define, design, and ship new features. Optimize applications for maximum speed and scalability. Write clean, maintainable, and efficient code. Troubleshoot and debug applications. Stay updated with the latest industry trends and technologies. Potentially lead and mentor a team of developers. Requirements Diploma / bachelor degree / master degree in computer science or subjects related to computer software programming. Minimum 4 years of experience in JavaScript and jQuery development. Proficiency with HTML5, CSS3, and related web technologies. Experience with TypeScript is a plus. Familiarity with libraries like fabric.js and HTML Canvas. Strong problem-solving skills and attention to detail. Excellent communication and teamwork skills. Ability to manage multiple tasks and deliver high-quality results under tight deadlines. Knowledge of React, Angular, or other JavaScript frameworks is an added advantage but not necessary. Benefits Job Timing: Flexible Working Hours 5 days working (All sat & sun Off) Perks: 5 Days Working Flexible working Hours A competitive salary Scope of speedy career growth Supportive & Friendly Work Culture Appreciation cash rewards and certificates Referral Bonus 21 Paid Leaves Friendly Environment On-time Salary Overtime Payment Mostly activities for Refreshment and gain more knowledge Celebrations (Birthday, Festival, Picnic, Movie, Lunch, Dinner, etc.) Chance to lead a team. Updated: 5 minutes ago

Job Title: Abroad Education Manager Germany (Public & Private Universities, Visa & Scholarships) Location: Rajouri, Noida, South Extension Experience: 6+ Years in Abroad Education & University Admissions Industry: Overseas Education Consultancy Employment Type: Full-time Job Description: We are looking for an experienced Abroad Education Manager Germany , specializing in public universities, private universities, STEM & business programs, scholarships, and visa processing . The ideal candidate should have strong managerial and leadership skills , be capable of handling a team, and ensure at least 50+ successful German student visas per intake . Key Responsibilities: 1. Student Counseling & Enrollment Guide students on public universities (tuition-free) and private universities with scholarship options . Educate students on German higher education system, ECTS credits, and Bologna process . Provide specialized counseling on Uni-Assist, direct university applications, and Studienkolleg requirements . Assist students in profile evaluation for STEM, business, and research programs , focusing on internships and work experience. Explain language requirements (English & German-taught programs) and visa regulations . 2. Team Management & Target Achievement Lead a team of counselors handling German university applications, scholarships, and visas . Set and achieve admission & visa targets (150+ successful student visas per intake) . Conduct training on APS Certificate, blocked accounts, visa interviews, and German residence permits . Ensure seamless coordination between students, universities, and internal teams . 3. Application Process & Admissions Guidance Oversee end-to-end applications for Uni-Assist, Hochschulstart, and direct university portals . Assist students in crafting SOPs, LORs, and academic CVs tailored for German universities . Guide students on DAAD scholarships, Erasmus programs, and university-specific grants . Manage admissions to TU9 universities, UAS (Fachhochschule), and pathway/Foundation courses . Facilitate credit transfers, Studienkolleg preparation, and pre-admission courses . 4. Visa Processing & Compliance Ensure 150+ successful German student visas per intake (National D Visa Study & Job Seeker Visa) . Train students on APS verification, visa interview preparation, and blocked account setup . Educate students on residence permit procedures, post-study work options, and PR pathways . Handle visa rejection cases and guide students on appeals and reapplications . Monitor uni enrollment deadlines, health insurance, and accommodation arrangements . 5. University Partnerships & Industry Events Build partnerships with top public & private universities in Germany . Strengthen university relations through participation in DAAD, Study in Germany, and ICEF events . Identify high-ranking universities with strong industry collaborations and job placement opportunities . Collaborate with companies and research institutions for student internships & job placements . 6. Marketing & Lead Generation Organize German university webinars, application days, and visa workshops . Develop content on German public vs. private universities, DAAD scholarships, and career pathways . Promote student success stories in TU9, STEM, and business school admissions . Design marketing campaigns to attract students for undergraduate, postgraduate, and research programs. 7. Reporting & Performance Analysis Track and report visa success rates, admission conversions, and student placements . Analyze trends in German university admissions, visa approvals, and post-study employment . Optimize processes based on student success, university tie-ups, and industry collaborations . Required Skills & Qualifications: 6+ years of experience in German education counseling, admissions, and visa processing . Strong knowledge of TU9 universities, private universities, DAAD scholarships, and job market trends . Proven experience in managing student enrollments, university tie-ups, and visa success rates . Familiarity with Uni-Assist, APS verification, blocked accounts, and German residence permit rules . Ability to handle 150+ successful German student visas per intake . Excellent leadership, communication, and counseling skills . Perks & Benefits: Competitive Salary + Incentives on Visa Success International University Networking & Training Annual Participation in DAAD, ICEF & Study in Germany Events Professional Development in German Public & Private University Admissions Opportunities to Conduct University Fairs, Partnerships, and Sponsorships Apply Now! Interested candidates can share their resumes at hr.delhincr@texasreview.in or contact 7701855915- Chelsi 7815948127 - Goldi for more details.

Job Profile - Reactivation Desk Responsible in calling the database assigned for reactivating inactive clients Out calling the clients for reactivation and solving their queries getting them to start trading and keeping them active call -9082104424 Required Candidate profile Freshers must have deep knowledge of Stock Market Should have good communication & presentation skills. Should possess strong networking & relationship building skills www.hyfly.in

Greetings from Synergy Resource Solutions, a leading recruitment consultancy firm. We are hiring for our client company: Client Company Details: Business Turnover Enhancement Project Execution Company. Founded in 2012, company initially focused on driving turnover growth for MSMEs through targeted Business Enhancement Solutions. Our personalized strategies consistently enhanced client performance and helped them surpass competitors. Now operating as Private Limited Company, we have expanded our reach internationally, providing strategic guidance, resources, and networks to accelerate business growth. What sets us apart is our comprehensive support spanning lead generation to payment collection activities, ensuring client success through close collaboration and hands-on execution. Company is dedicated to achieving company s business goals at every stage of the Business Journey. Location: Ahmedabad. Qualification: Any Graduate. Gender: Male / Female. Experience: Min 2 Years in Hiring for Start-Ups. Job Timings: 9:30 AM to 5:45 PM. , Working days: Mon-Sat. Week Off: Sunday. Salary: As per Industrial Standards + Perks. Role Definition: The primary purpose of a Human Resource Hiring Executive is to attract, recruit, and onboard qualified talent to meet the organizations staffing needs. They are responsible for the full recruitment lifecycle, from sourcing candidates to extending job offers, ensuring a smooth and efficient hiring process that aligns with the companys strategic goals and fosters a positive candidate experience Roles Responsibilities: Responsible for the complete process of attracting, recruiting, and onboarding talent. Collaborating with the management to understand needs, developing sourcing strategies, screening and interviewing candidates. Liaison with Recruitment Consultants and College Placement Authorities. Managing the interview process, ensuring a positive candidate experience, handling offer negotiations, and facilitating initial onboarding. Maintain compliance and contribute to the employer brand, all aimed at securing the right people to meet the organizations goals. Skills Traits: Exceptional Communication Interpersonal Skills. Strong Evaluation Assessment Abilities. Organizational Time Management Prowess. Knowledge of Recruitment Strategies Market Trends. Ethical Conduct Candidate Focus. If interested, Please share your updated resume with details of your present salary, expectations notice period.

Job Title: Industrial Automation & Control Engineer / PLC Programmer BE / Diploma Electrical / Electronics / Mechatronics 1-4 Years of experience Location: Bangalore Job Summary: Industrial Automation & Control Engineer designs, maintains, and troubleshoots pumping stations that use programmable logic controllers. The PLC Programmer must be able to identify and provide reliable solutions for all technical issues to assure complete customer satisfaction through all stages of the process. The PLC Programmer must be able to meet project timelines and could travel to maintain and upgrade software and hardware for customers in facilities. Desired Skills: Excellent knowledge of Industrial Automation & Control Engineering. Experience in designing, developing, and implementing control programs for automated systems using PLC devices from GE, ABB, Siemens, and Rockwell Automation. Experience in configuring PLC hardware and software, including input/output (I/O) modules, communication interfaces, and human-machine interfaces (HMIs). Knowledge of Factory Acceptance Test (FAT) procedures and Site Acceptance Test (SAT) procedures. Familiarity with Panel GA Drawings and Panel Wiring Diagrams. Onsite experience in commissioning and debugging control systems. Roles and Responsibility: Onsite deployment of Software, Testing & Commissioning Coordinate with Development Team and reporting Co-ordinate with Customer for Project delivery and Quality

Description What makes us Qlik? A Gartner Magic Quadrant Leader for 1 5 years in a row , Qlik transforms complex data landscapes into actionable insights, driving strategic business outcomes. Serving over 40,000 global customers, our portfolio leverages pervasive data quality and advanced AI/ML capabilities that lead to better decisions, faster. We excel in integration and governance solutions that work with diverse data sources, and our real-time analytics uncover hidden patterns, empowering teams to address complex challenges and seize new opportunities. The SAP Technical Support Engineer Role At Qlik, our support Technicians are our HEROES. That s because our technicians do more than manage complex technical support cases they are determined, resilient, and have an unshakable positive mindset. Our team in Bangalore consists of support professionals from multiple backgrounds, who work and play closely together. We have a larger Global support team that we interact with daily, with locations in Bangalore, Barcelona, Lund, Sydney, Tokyo, China, Raleigh and North Carolina USA. We think you will love it here! We operate 24x7 which involves working during one of the below shifts determined as per business need and have a non-standard work week (Ex: Tue - Sat, Wed - Sun). While we have 5 days a work week, your weekly offs may fall on any day of the week depending on the shift rosters that are prepared on a two-month basis. AMER hours (Eastern Standard Time - 5.30 PM/6.30 PM IST or Pacific Standard Time - 8:30 PM/9:30 PM IST onwards depending on Daylight Savings Time) EMEA hours - 12:00 PM/1 PM/2PM IST onwards depending on Daylight Savings Time APAC hours - 5.30 AM IST onwards Work hours are subject to change depending on Business needs. What makes this role interesting? Teamwork is important and we are looking for someone who s up for collaborating. A buddy will be there for you at the start, and you ll report to the team manager. We will support you in your onboarding and training, and we expect you to quickly take ownership of tasks. It won t be long before you re running your own assignments and making a real difference all by yourself. Prove yourself and you ll find career progression will follow. We ll share ways of working and expect you to follow them, it s all about keeping professional standards high and errors low while delivering the best experience and outcomes for our customers. Here s how you ll be making an impact: Provide L2/L3 production support for SAP BW and SAP S/4HANA systems, including monitoring, troubleshooting, and resolution of incidents. Handle incident and service request queues using ITSM tools with strict adherence to SLAs. Investigate and resolve data extraction, transformation, and loading (ETL) issues across SAP BW (on HANA/BW/4HANA) and S/4HANA systems. Perform root cause analysis and apply permanent fixes for recurring production issues. Collaborate with cross-functional teams to support Qlik Replicate, Qlik Compose, and Qlik Sense data flows from SAP . Maintain and support ODP-based data extractions, BW Queries, InfoProviders , and CDS Views consumed by Qlik tools. Monitor and optimize Qlik data pipelines from SAP BW and S/4HANA , including real-time replication. Support user queries related to reporting and analytics driven by Qlik dashboards. Manage and escalate Sev1/Sev2 incidents as per defined procedures and coordinate with global teams. Assist with system upgrades, patch deployments, and post-deployment validations relevant to SAP-Qlik integration. We re looking for a teammate with: 4+ years of hands-on experience in SAP BW ( on HANA/BW/4HANA ) and SAP S/4HANA production support. Strong knowledge of BW data flows, Process Chains, ABAP routines, BEx Queries, and CDS Views. Familiarity with ODP extractors, SLT replication, and SAP connector troubleshooting for Qlik. Excellent communication, documentation, and problem-solving skills. Ability to work independently in a 24x7 global support model (on-call rotation if required). The location for this role is: Bangalore-India (This is a hybrid opportunity based in JP Nagar Bangalore location). Apply now and help change how the world transforms complex data landscapes into actionable insights and turns complex data challenges into new opportunities! More about Qlik and who we are: Find out more about life at Qlik on social: Instagram , LinkedIn , YouTube , and X/Twitter , and to see all other opportunities to join us and our values, check out our Careers Page . What else do we offer? Genuine career progression pathways and mentoring programs Culture of innovation, technology, collaboration, and openness Flexible, diverse, and international work environment Giving back is a huge part of our culture. Alongside an extra change the world day plus another for personal development, we also highly encourage participation in our Corporate Responsibility Employee Programs If you need assistance applying for a role due to a disability, please submit your request via email to accessibilityta @ qlik.com . Any information you provide will be treated according to Qlik s Recruitment Privacy Notice . Qlik may only respond to emails related to accommodation requests. #L1-APAC

To Manage Information Security activities and ITSM processes related to Airport IT Operations. To ensure Security, Quality and Compliance of Systems, Services , Processes . To ensure IT Process Alignment with Business and Stakeholder Requirements Complete Technology support for HES/ MDM/ Peripheral application to Operations team for the said location KEY ACCOUNTABILITIES Accountabilities Key Performance Indicators Business process Documentation and SOP approval from Discom Coordinating with stakeholders to integrate the applications into the overall business processes. Lead design and ensure the platform meets all the SLAs measurement requirement. SAT / SLA Approval of each meter lot from Discom. Project SLAs should be met on daily / monthly basis. To conduct monthly SAT for the maximum meter numbers possible by strong coordination with operations team. HES/MDM/Peripheral applications 1. Leading the planning and execution of integration of all system 2. System should work to the satisfaction of all the stakeholders. There should not be any delay in field operations (CI/MI etc) owing to application reasons. Additional reports, if required, for better monitoring should be developed in respective modules. Ensuring that adequate security patches are applied, and platform is timely upgraded KEY ACCOUNTABILITIES - Additional Details EXTERNAL INTERACTIONS External: Roles you need to interact with outside the organization to enable success in your day-to-day work Hardware, Software, Communication Tech vendor/partners, Network service providers INTERNAL INTERACTIONS Internal: Roles you need to interact with inside the organization to enable success in your day-to-day work Technology Head, Head IT, Operations Head team, Business Team (If required) FINANCIAL DIMENSIONS Safeguarding SLA Deductions for GMR Clear demarcation of the responsibly in case of any field failure OTHER DIMENSIONS Minimize client escalations and maintain positive environment EDUCATION QUALIFICATIONS B.Tech (Preferably Computer Science) / MCA Strong data interpretation Analytical ability Excellent communication and presentation skills, with the ability to articulate complex concepts to both technical and non-technical stakeholders Ability to effectively manage numerous simultaneous External and Internal interactions RELEVANT EXPERIENCE 8+ years of total experience in the area of metering / Smart metering COMPETENCIES Personal Effectiveness Social Awareness Entrepreneurship Problem Solving Analytical Thinking Planning Decision Making Capability Building Strategic Orientation Stakeholder Focus Networking Execution Results Teamwork Interpersonal influence

Job responsibilities of mechanical engineer Plan, coordinate and execute mechanical engineering activities for projects (greenfield/brownfield) Review BOQs, layouts, specifications and ensure installation of HVAC, utilities and cleanroom systems as per cGMP FDA norms. Collaborate with cross-functional teams - QA, QC, Production, EHS, Maintenance - for seamless project execution and compliance. Monitor project schedules (MS Project), milestones and critical path to ensure on-time delivery. Lead vendor management, contractor supervision and technical review meetings for mechanical systems. Conduct equipment FAT/SAT, qualification protocols (DQ, IQ, OQ) and manage mechanical documentation for regulatory audits. Ensure adherence to safety, quality and statutory norms across all stages of mechanical work. Strong knowledge of HVAC systems, AHUs, Chillers, Compressors, Boilers, BMS, and cleanroom design. Familiar with IS, ASME, and cGMP engineering standards. Proficient in AutoCAD, MS Project/Primavera, and utility design tools. Knowledge of WFI, PW, steam and compressed air generation/distribution systems. Strong cross-functional coordination and leadership. High accountability and ownership of timelines. Detail-oriented, quality-driven, and safety-conscious. Excellent communication, negotiation, and documentation skills. Problem-solving mindset with agility to adapt to changes.

Your Role Complete Dry System Package Testing. P&ID Verification & Final Dimension Inspection. Testing Documentation & MRB Preparation of Dry System. Plant testing Instrument Calibration. Technical Service Support at Site. PLC, JB, VFD, PDB, Motors Panel Inspection & Documents review. Inwards Inspection of Electrical & Instrumentation parts. Prepare Quality Dossier for Dry systems. To succeed, you will need BE (Electrical) or equivalent bachelor s degree. Minimum 2 years of experience in Quality & Testing Engineer. Experience in Electrical Wiring, Instrumentation and panel. Instrument calibration. P&ID Verification knowledge at the final assembly stage. Knowledge of Control logic.Better understanding and functionality knowledge of Instruments such as Temperature transmitters, Pressure transmitters, Flow switches/transmitters, Level switches/transmitters etc. Should have knowledge of Motors (Type test, routine test etc), Control Panels, Control Valves & On-Off valves. Should be able to read P&ID, GA drawings and Electrical Drawings. Should be familiar with PLC, HMI, VFD, PID. Should have knowledge of Instruments (Pressure, Temperature, Flow Transmitters) calibration. Should be able to perform FAT/SAT, Should have knowledge of Loop checking of Junction Box. Should have able to review Instruments certificates as per datasheets Preparation of Quality Dossier for dry vacuum package inspection and test plan (ITP). Inward Material Inspection of electricals/mechanical parts. Basic knowledge of ASME Standards on pipe, flange, fittings etc. Root cause analysis and corrective action In return, we offer you Have multiple interactions with different stakeholders internally and externally A culture known for respectful interaction, ethical behavior and integrity where sustainability matters Potential to see your ideas realized and to make an impact on technically interesting projects New challenges and new things to learn every day Plenty of opportunities to grow and develop Global job opportunities, as part of the Atlas Copco Group City Pune Recruiter Nandini Shetty Hiring Manager Prashant Tripathi

-Lead and manage Dynamic process simulation (OTS) projects from start to finish, ensuring timely and high-quality deliverables - Develop and implement process simulation models using Unisim/Aspen Hysys Independently - Working on DCS Integration for Emulated and Direct Connect OTS systems - Work closely with clients to understand their specific OTS project requirements and deliver projects on schedule and with Quality. - Conduct project testing (MAT, FAT, SAT) with client independently - Mentor and support junior engineers in developing their process simulation skills

Greetings from Synergy Resource Solutions, a leading Recruitment Consultancy. Our client company provides Accounting Bookkeeping, Medical Billing, Audio Visual, IT outsourcing services to small businesses across the USA. Our client is seeking a Motion Graphics Designer to create dynamic visual storytelling across their digital platforms. The ideal candidate combines strong traditional design principles with innovative motion techniques to elevate their brand. Youll develop compelling animations, promotional videos, and multimedia content that drives brand awareness and engagement. Position : Motion Graphics Designer Industry : KPO, Accounting Experience : 7-10 years Job Location : Ahmedabad (Ashram Road) Shift : 11 AM to 8:30 PM / 12 PM - 9:30 PM Work Mode : Work from Office (5 days/ Sat & Sun weekly off) Roles & Responsibilities: Creative Production Design and produce high-quality animations, videos, and motion graphics for multiple platforms Create compelling visual content for social media, presentations, marketing campaigns, and live events Develop short-form video content, explainer videos, and animated ads Design engaging paid social ads across static, animated, and video formats Create brand assets, UI visuals, infographics, and presentation materials Technical Expertise Serve as in-house design expert proficient in Adobe Creative Suite (Photoshop, Illustrator, Premiere Pro, After Effects) Optimize video assets for various platforms and screen sizes Edit and enhance video content to ensure high-quality output Maintain design repositories for efficient asset management Balance AI-driven design automation with hands-on creative work Collaboration & Strategy Work closely with marketing, product, and event teams to develop campaign creatives Support lead-generation initiatives through visual storytelling Help shape strategic vision by identifying design opportunities that create business value Maintain and evolve the companys brand identity and design system Ensure visual consistency across all marketing channels and touchpoints Qualifications 5+ years of experience in motion design and graphic design Bachelors degree or equivalent in design, animation, or related field Expert proficiency in Adobe Creative Suite (After Effects, Premiere Pro, Photoshop, Illustrator) Strong portfolio demonstrating both static and animated content creation Experience with digital storytelling and translating complex concepts into engaging visuals Ability to manage multiple projects in fast-paced environments while maintaining attention to detail Preferred Experience with 3D design tools Familiarity with AI-powered design and video generation tools Experience with UI animation and micro-interactions Background in creating content for healthcare or technical industries Skills Creating engaging static graphics, motion graphics, and short-form video content Balancing traditional design workflows with emerging technologies Strong communication and cross-functional collaboration Exceptional visual aesthetics and composition Work Environment Details: Flexible and Adaptive to changes High level of commitment towards the job Active team player, helpful and supportive to colleague and other cross team members If interested, you may share your updated resume with details of your relevant experience, current salary, expected salary and notice period.