395 Rs232 Jobs - Page 13

Engineering in ECE or ETC,PCB design using Altium Design Software. Experience in Multi-Layer PCB design,Experience in PCB design with Signal Integrity. Power Integrity and EMI/EMC considerations. Experience in working with Serial protocols such as RS422/485, I2C, SPI, UART etc. Experience in working with Wi-Fi, LoRa and Bluetooth related hardware and antenna selection. Experience in working with Micro controller & Computer Module. Exp in Preparing FEMCA & DFMEA analysis for hardware Design

Ripple Healthcare is looking for Senior Embedded Engineer to join our dynamic team and embark on a rewarding career journey The Embedded Engineers is responsible for overseeing and managing key aspects of the role, including strategic planning, team coordination, and ensuring the achievement of objectives Duties include analyzing workflows, optimizing processes, collaborating with cross-functional teams, and ensuring compliance with industry standards Additionally, the role involves reporting on performance, identifying areas for improvement, and implementing innovative solutions to enhance efficiency and effectiveness 8,16,32 BIT Microcontrollers, Firmware Development,RTOS,Data Management,I...

- Strong Experience in Firmware testing of the Indutrial Embedded Device Firmware and validation of PLCs, Motion Logic controllers, RTUs, HMI and SCADA systems - Protocol Testing knowledge on BACnet, OPC-UA, MODBUS - Experience in the connectivity protocols Ethernet, RS485, RS232, CAN - Experience in control systems, DCS (Distributed control systems) - Experience in HIL (Hardware in Loop) Testing - Usage of in-house tools and simulators for testing - Test Lab design and preparation, troubleshooting - Hands on with Python Scripting language , OOPS in Python - Hands on with Test Automation Framework design and development (Robot Framework, pybot, pytest) - Strong experience in Realisation of R...

12+ years of hands-on experience in embedded firmware development for medical products Experience in Embedded Development in C for microcontrollers and embedded ARM-based processors Design, development, and optimization of firmware for embedded medical devices Develop low-level drivers, communication protocols, and real-time firmware for microcontrollers and processors Experience with medical device regulations and safety standards(IEC 62304, ISO 13485, ISO 14971, IEC 62366- 1) Experience with cloud-connected medical devices and IoMT frameworks Architect firmware solutions, considering power efficiency, performance, and scalability Troubleshoot and debug embedded systems using oscilloscopes,...

- Strong Experience in Firmware testing of the Indutrial Embedded Device Firmware and validation of Gateways and Edge Controllers - Protocol Testing knowledge on Modbus, BACnet, OPC-UA (Modbus Preferrable) - Experience in the connectivity protocols Ethernet, RS485, RS232, CAN - Experience in HIL (Hardware in Loop) Testing - Usage of in-house tools and simulators for testing - Hands on with Python Scripting language , OOPS in Python - Hands on with Test Automation Framework design and development (Robot Framework, pybot, pytest - Any one) - Test Case writing and Test Plan creation - Knowledge of GIT or other software configuration management tools - Knowledge of JIRA or similar bug tracking t...

Experience -1 to 2 years Design & develop ATE/Test Jigs, handle test setups, debugging & component selection Knowledge of PCI, cPCI, PXI, Analog, RS232, RS422/485, aerospace protocols (ARINC 429, MIL1553B optional) Experience with test instruments (DMM, DSO, Logic Analyzer) & project documentation

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview As a Test and Validation Engineer for TE Connectivity you will focus on test system design and verification-validation testing of high-speed products in cable assemblies targeting high speed communications and connectivity within datacenters and wireless infrastructure. You will be expected to independently work on projects in the areas of validation for product, test system design including selection of hardware and programming. You will work collaboratively within a broader cross functional team of electrical, mechanical, m...

The right engineer will drive the success of power IP (Intellectual Property) and features in AMD (Advanced Micro Devices) products through leadership & coordination, resolution of technical dependencies, and achievement of schedule commits. This is a high-visibility and widely multi-functional role, spanning pre-silicon architecture to post-silicon implementation & product delivery. THE PERSON: Your curiosity will drive your learning and innovation to improve how we as a group, and an organization, can get better every day. Your peers will provide you a results-oriented and encouraging environment for your career growth, fueling your opportunity to be a part of Delighting Our Customers. KEY...

1. Requirement Analysis, Design & Development. 2. Verification & Validation. 3. Integration & Field testing. 4. Reviews & Reporting. 5. Design Documentation. Skills Required: 1. 8/16 bit Microcontroller based development. 2. Product Development life cycle. 3. Knowledge of RS232 , LAN , CAN , SPI , I2C , preparation of wiring diagrams. 4. Development of Electromechanical system,special purpose machines is preferred 5. Integration & Testing. BE/B.Tech- Electronics/Electromechanical.

Job Information Job Opening ID ZR_1991_JOB Date Opened 16/06/2023 Industry Technology Job Type Work Experience 6-10 years Job Title Lead Engineer- Hardware City Krishna Province Andhra Pradesh Country India Postal Code 520001 Number of Positions 1 Engineering in ECE or ETC,PCB design using Altium Design Software. Experience in Multi-Layer PCB design,Experience in PCB design with Signal Integrity. Power Integrity and EMI/EMC considerations. Experience in working with Serial protocols such as RS422/485, I2C, SPI, UART etc. Experience in working with Wi-Fi, LoRa and Bluetooth related hardware and antenna selection. Experience in working with Micro controller & Computer Module. Exp in Preparing ...

Job Summary: The Electrician - Level II performs preventive and corrective electrical maintenance, troubleshooting, and support to ensure the availability, reliability, and safe operation of equipment in a manufacturing environment. This role requires working independently with limited supervision, selecting and using appropriate tools and technology. The Electrician contributes to continuous improvement, ensures compliance with safety protocols, and provides electrical expertise across various machines, systems, and plant automation infrastructure. Key Responsibilities: Health, Safety & Environmental (HSE): Follow Cummins safety standards, use PPE, and ensure safe work practices including L...

Lead the architecture, design and development of Processor Core Front end of pipeline units for high-performance IBM Systems. - Architect and design I-Cache, Instruction Fetch, Branch Prediction and Decode units of a high performance processor CPU - Develop the features, present the proposed architecture in the High level design discussions - Estimate the overall effort to develop the feature. - Estimate silicon area and wire usage for the feature. - Develop micro-architecture, Design RTL, Collaborate with other Core units, Verification, DFT, Physical design, Timing, FW, SW teams to develop the feature - Signoff the Pre-silicon Design that meets all the functional, area and timing goals - Pa...

Works in the area of Software Engineering, which encompasses the development, maintenance and optimization of software solutions/applications. 1. Applies scientific methods to analyse and solve software engineering problems. 2. He/she is responsible for the development and application of software engineering practice and knowledge, in research, design, development and maintenance. 3. His/her work requires the exercise of original thought and judgement and the ability to supervise the technical and administrative work of other software engineers. 4. The software engineer builds skills and expertise of his/her software engineering discipline to reach standard software engineer skills expectati...

Key Responsibilities: Design, develop, test, and maintain applications in LabVIEW. Work with State Machine and Message Event execution models to build scalable and maintainable code. Develop communication interfaces using ModBUS , RS232 , USB , and Ethernet protocols. Implement and support real-time data acquisition systems using NI DAQ hardware . Integrate MS-SQL and MySQL databases with LabVIEW applications for data logging and retrieval. Specify system hardware requirements and troubleshoot issues at both software and system levels. Collaborate with cross-functional teams to design robust and reliable test or control systems. Diagnose and resolve issues involving not only software, but al...

Job Responsibilities: Responsible for the hardware circuit design of the brushless DC/BLDC/PMSM motor and the controller of the DC motor, the simulation design and analysis of the core hardware part Responsible for hardware requirement capture, analysis and documentation. Electronic component selection, control circuit schematic design, PCB layout design , and commissioning and testing of single-board components Work with software engineers to complete the commissioning and testing of the motor drive; Responsible for the compilation of project-related technical documents, BOM output and DFEMA; Responsible for Hardware qualification (CVT, DVT and PVT), EMC/EMI certification Lead the developme...

> Role Purpose The purpose of this role is to work with Application teams and developers to facilitate better coordination amongst operations, development and testing functions by automating and streamlining the integration and deployment processes Do Align and focus on continuous integration (CI) and continuous deployment (CD) of technology in applications Plan and Execute the DevOps pipeline that supports the application life cycle across the DevOps toolchain from planning, coding and building, testing, staging, release, configuration and monitoring Manage the IT infrastructure as per the requirement of the supported software code On-board an application on the DevOps tool and configure it...

> Role Purpose The purpose of this role is to work with Application teams and developers to facilitate better coordination amongst operations, development and testing functions by automating and streamlining the integration and deployment processes Do Align and focus on continuous integration (CI) and continuous deployment (CD) of technology in applications Plan and Execute the DevOps pipeline that supports the application life cycle across the DevOps toolchain from planning, coding and building, testing, staging, release, configuration and monitoring Manage the IT infrastructure as per the requirement of the supported software code On-board an application on the DevOps tool and configure it...

> Role Purpose The purpose of this role is to work with Application teams and developers to facilitate better coordination amongst operations, development and testing functions by automating and streamlining the integration and deployment processes Do Align and focus on continuous integration (CI) and continuous deployment (CD) of technology in applications Plan and Execute the DevOps pipeline that supports the application life cycle across the DevOps toolchain from planning, coding and building, testing, staging, release, configuration and monitoring Manage the IT infrastructure as per the requirement of the supported software code On-board an application on the DevOps tool and configure it...

- Lead the architecture, design and development of Power Management for a highly virtualized, multi-threaded, many-core and multi-socket SMP (symmetric multi-processor) . - Develop the features, present the proposed architecture in the High level design discussions to hardware and software teams - Develop micro-architecture, Design RTL, Collaborate with the Verification, DFT, Physical design, firmware, software teams to develop the feature - Signoff the Pre-silicon Design that meets all the functional, area and timing goals - Participate in silicon bring-up and validation of the hardware - Estimate the overall effort to develop the feature - Estimate the silicon area required for the feature...

We are seeking a highly skilled Software VV Engineer, proficient in Embedded C-Language to join our engineering team. The role involves planning, executing, and documenting Verification and Validation activities for safety critical embedded software in compliance Aero/Rail/etc. Knowledge of standards would be desired. The candidate will play a key role in traceability and rigor across the verification lifecycle. Key Responsibilities Perform requirements-based testing (RBT) using low-level and high-level requirements . Hands-on experience in unit testing, integration testing . Develop and execute Software VV plans , procedures, and reports in alignment with industry specific standards. Own re...

Embedded Application Development in C and Python Experience with communication protocols: CAN, SPI, I2C, RS232/RS422/RS485, Modbus, TCP/IP Strong understanding of OS and RTOS concepts Proficiency in using various debugging tools

We currently have multiple openings, at various levels, in our Development Lead Hardware team If you know someone who shares our values and beliefs, and has 9 to 13 years of relevant experience, this is their opportunity to join us. B.Tech.(Electronics and Communication Engineering),B.E.(Electrical Engineering),B.E.(Electronics and Telecom Engineering) Analog Circuit Design,Digital Circuit Design,Micro Controllers ,PCB Design - EMI/EMC Design,Power Supply Design - SMPS; PDD; LDO DC/DC,RF Design - Communication Circuit Design,RS232 / RS485 - Communication Circuit Design,Serial communication

Dear Candidate, We are hiring a Firmware Developer to build low-level software for embedded systems. Ideal for engineers who love working close to hardware with a focus on efficiency and reliability. Key Responsibilities: Develop, test, and debug firmware for embedded devices Work with hardware engineers to define software-hardware interfaces Optimize memory and power usage for constrained environments Write device drivers and real-time operating system (RTOS) components Required Skills & Qualifications: Proficiency in C/C++ for embedded development Experience with microcontrollers (ARM, AVR, STM32, etc.) Familiarity with serial protocols (SPI, I2C, UART) Bonus: Knowledge of real-time system...

MANDATORY SKILLS : Bootloader,Embedded C,Autosar Mandatory Hands-On experience with ISO14229 (UDS Protocol) Mandatory experience on Flash Bootloader topics Mandatory Embedded C Programming Hands on Experience with software development tools like CAN Analyzer, Canoe, Debugger. Ability to solve technical issues independently. Exposure to Vector Flash Boot Loader would be added advantage. Exposure on OTA would be added advantage. Exposure to ASPICE Process would be added advantage. Good analytical and communication skills. Job Responsibilities The candidate will be involved in tasks related to Integration Development of FBL Features and performing testing activity. For the Integration Developme...

Innovate to solve the worlds most important challenges The future is what we make it! Honeywell is a global technology leader committed to innovation and sustainability. As a Fortune 100 diversified technology and manufacturing leader, Honeywell International is dedicated to creating a sustainable future for our planet. We develop and manufacture technologies that address some of the worlds most critical challenges, such as energy efficiency, clean energy generation, and environmental conservation. Develop firmware for a variety of embedded products. You will create project and technical reports as required and help define product architecture as needed. You will participate in schematic/lay...