399 Ros Jobs - Page 7

Company Overview: We are a fast-moving startup developing next-generation amphibious drones capable of operating both in air and underwater. Our mission is to push the boundaries of autonomous aerial-marine robotics using open-source technologies like ArduPilot . Role Overview: We are seeking highly motivated Firmware Development Interns with a strong foundation in C++ , embedded systems, and a passion for drones or robotics. You will be directly involved in building custom flight firmware , developing new flight modes, and integrating complex sensor and control logic into ArduPilot for an amphibious drone platform. This is a hands-on role ideal for students, fresh graduates, or junior engineers looking to gain deep experience in real-world drone firmware development. Responsibilities: Work closely with the lead developer to fork and customize the ArduPilot codebase Develop and test new flight modes (e.g., VTOL to underwater transitions) Integrate sensors (IMU, pressure, DVL, sonar, leak detection) via I2C, UART, or CAN Modify and extend hardware abstraction layers (HAL) where necessary Implement control logic for motors, thrusters, and failsafe systems Use SITL and Gazebo to simulate and validate drone behavior Debug and test firmware in live hardware-in-the-loop (HITL) and field conditions Skills & Requirements: Education: Pursuing or recently completed BE/BTech/MTech in: Electronics / Embedded Systems Mechatronics / Robotics Computer Science / Artificial Intelligence Aerospace / Aeronautics / Instrumentation Required Skills: Solid understanding of C++ (OOP, pointers, templates, etc.) Basic knowledge of embedded systems and microcontrollers Understanding of sensors and communication protocols (I2C, SPI, UART) Familiarity with Git and collaborative development workflows Bonus Skills (Nice to Have): Experience with ArduPilot or PX4 ROS/ROS2 exposure (for companion computer interface) Familiarity with Gazebo , SITL , or UAV simulations Exposure to STM32 or ARM Cortex-based platforms Drone enthusiast, DIY projects, or prior drone build experience Location: Remote / Hybrid (based on project stage) Occasional travel for field testing (optional) Duration & Commitment: 3 to 6 months (with potential extension or full-time offer) Flexible hours, but minimum weekly commitment of 20 hours What You'll Gain: Real-world experience in ArduPilot-based firmware engineering Exposure to one of the most advanced autonomous drone stacks Mentorship in aerospace-grade software architecture Opportunity to contribute to open-source / research publications Potential to continue as a paid full-time engineer Job Types: Full-time, Internship Contract length: 3 months Pay: ₹5,000.00 - ₹15,000.00 per month Schedule: Day shift Fixed shift Ability to commute/relocate: Yelahanka, Bengaluru, Karnataka: Reliably commute or planning to relocate before starting work (Preferred) Application Question(s): Are you able to join Immediately? Work Location: In person Application Deadline: 30/06/2025 Expected Start Date: 02/07/2025

We’re Hiring | Advanced Mechatronics Engineering Position: Senior Advanced Mechatronics Engineer Location: Chennai Experience: 3 to 8 years What You'll Do Design and develop mechatronic subsystems—sensors, actuators, controllers 2 Integrate and prototype robotic and automation solutions 3 Debug, test, and ensure system reliability and compliance 4 Collaborate cross-functionally with mechanical, software, and electrical teams 5 Document designs, test results, and engineering workflows Must-Have Experience 3–8 years in mechatronics system design Led at least 1 client project end-to-end Experience with project planning, hiring, budgeting, and team coordination Exposure to methodologies like Design Thinking, Kanban, Six Sigma Technical Skills Required Circuit design, soldering, debugging with DMM, CRO Integration of sensors, actuators, microcontrollers, IoT devices Programming: C/C++, Python, Java (Assembly and Ladder are a plus) Tools: MATLAB Simulink, ROS, Gazebo Protocols: CANBUS, RS232, TCP/IP Qualifications BE/BTech or Master’s in Electronics / Mechatronics Engineering Strong communication, documentation & team collaboration skills Apply Now | DM usmary@chosenconsultanthr.com/9790438392 Job Types: Full-time, Permanent Pay: Up to ₹700,000.00 per year Benefits: Health insurance Provident Fund Schedule: Morning shift Work Location: In person

Job Description - We are seeking a Machine Learning Engineer to assist in developing and implementing object detection and AI-based predictions. You will have the opportunity to work on real-world applications and contribute to the development of novel algorithms. As a ML engineer, you’ll collaborate with our team and works various applied AI/ML tasks. Key Responsibilities - Assist in training and fine-tuning ML models for real-time AI-based tasks. Work with large datasets to prepare, annotate, preprocess, and augment data for training purposes. Implement and test model architectures to improve accuracy, speed, and performance. Help analyze and optimize model performance based on results and metrics. Document research and findings, contributing to team knowledge and project reports. Participate in code reviews and contribute to software development best practices. Stay updated with the latest trends and research in computer vision and applied ML. Qualifications - Bachelor's or master's degree program in Computer Science, Electrical Engineering, Data Science, or a related field. Solid understanding of AI/ML concepts, data cleaning, synthetic data generation and other relevant concepts. Hands-on experience with MLOps. Hands-on experience with YOLO or similar deep learning object detection frameworks (e.g., Faster R-CNN, SSD). Proficiency in programming languages such as Python Experience with OpenCV and Pytorch is a must. Experience with Statistical Analysis and modeling is a plus. Experience with CUDA and GPU acceleration is a plus. Experience with ROS and C++ is also a huge plus. Strong problem-solving skills, attention to detail, and a collaborative mindset. Preferred Skills - Knowledge of data cleaning techniques and data preprocessing methods. Familiarity with version control systems like Git . Experience in deploying models into production environments (optional). Exposure to ROS and OpenCV in C++.

Job Title: Developer – SLAM Framework (Ground-Fusion++) Location: Remote (India) Job Type: Full-Time | Remote | Research-Based Role Industry: Robotics, Autonomous Systems, AI Research Seniority Level: Mid-Senior Level Experience Required: 2–6 years About the Role We are looking for an experienced Developer to join our research and engineering team to contribute to Ground-Fusion++ , a Resilient Modular Multi-Sensor Fusion SLAM Framework , part of our IROS 2025 accepted paper: 📝 "Towards Robust Sensor-Fusion Ground SLAM: A Comprehensive Benchmark and a Resilient Framework" You will be at the forefront of SLAM innovation, building robust, real-world solutions for ground robots operating in degraded conditions using heterogeneous sensor data (GNSS, LiDAR, IMU, RGB-D, wheel odometers, etc.). As per our initial screening process, please fill out this form: https://forms.gle/9g8qwE5cjS3H7iwH7 Responsibilities Develop, test, and optimize the Ground-Fusion++ SLAM framework . Integrate and calibrate multiple sensors (LiDAR, RGB-D, IMU, GNSS, wheel odometry). Implement modular, extensible SLAM components for mapping and localization. Collaborate with a team of researchers and contribute to open-source releases. Support benchmarking and experiments using the M3DGR dataset. Required Qualifications Bachelor's/Master’s/PhD in Robotics, Computer Science, Electrical Engineering, or related fields. Proficient in C++ and Python for robotics system development. Hands-on experience with ROS/ROS2 and multi-sensor data fusion. Prior work with SLAM algorithms (e.g., LIO-SAM, Cartographer, ORB-SLAM). Strong grasp of 3D perception, probabilistic estimation, and real-time performance. Preferred Qualifications Experience working with GNSS-denied or degraded environments. Published or contributed to SLAM frameworks or datasets. Understanding of real-time embedded systems or robotic platforms. Experience contributing to academic papers or open-source projects. What We Offer Opportunity to work on cutting-edge SLAM research accepted at IROS 2025 . Full remote flexibility with global collaboration. Access to state-of-the-art benchmarks (M3DGR) and datasets. High-impact work bridging academia and real-world deployment. How to Apply Apply directly on LinkedIn or send your resume and GitHub/portfolio to pratiksha@meetwork.today & uma@meetwork.today with the subject: Developer Application – Ground-Fusion++ .

Job Title: Drone Technical Integrator Location: Pune Company: Enhansafe India Pvt. Ltd. Experience Required: 3–6 Years Department: UAV Systems Design and Integration Employment Type: Full-Time Job Summary: Enhansafe India Pvt. Ltd., a leading player in defense and security technology, is seeking a skilled and innovative Drone Technical Integrator to join our UAV R&D team. The ideal candidate will be responsible for the end-to-end integration of drone systems including hardware assembly, flight electronics, transmission systems, and custom drone applications. A deep understanding of UAV design, telemetry, software architecture, and control systems is essential. Key Responsibilities: Lead the integration of mechanical, electronic, and software components for custom drone platforms Design , proto type using 3d Printing and assemble drone frames with proper powertrain selection (motors, ESCs, PDBs) Install and calibrate flight controllers (Pixhawk, ArduPilot, PX4, etc.). Indigenous development will be preferred Configure and integrate GPS, telemetry radios, antennas, and power distribution systems Develop and test autonomous flight paths, waypoints, and return-to-home protocols Interface with sensors, gimbals, and payload systems as per mission requirements Program mission-specific drone software and applications (Python, C++, MAVLink, ROS preferred) Perform functional testing, flight trials, diagnostics, and tuning (PID, failsafe, redundancy) Troubleshoot electrical, firmware, and software issues in drone platforms Prepare integration documentation, wiring schematics, and system layouts Required Skills & Qualifications: Bachelor's Degree or Diploma in Electronics, Aerospace, Mechatronics, Robotics, or related field Proven hands-on experience in: Drone design and fabrication Flight controller setup and configuration RC/transmission systems and telemetry protocols GPS and navigation sensor integration Wiring and power distribution systems UAV coding platforms (ArduPilot, PX4, DroneKit, MAVSDK and other platforms) Strong knowledge of programming in Python/C++/Embedded C Familiarity with communication protocols (UART, I2C, CAN, SPI) Understanding of aerodynamics and flight stability parameters Desirable Attributes: Experience in defense or industrial drone platforms Exposure to real-time systems and autonomous drones Knowledge of ground control software (Mission Planner, Q Ground Control) Ability to work independently and in R&D team setups Strong documentation and reporting skills Compensation: Competitive salary based on experience and technical depth Project bonuses and innovation incentives Travel and field deployment allowance if applicable To Apply: Send your updated resume to vinayak@enhansafe.com with subject line: Application – Drone Technical Integrator Job Type: Full-time Pay: ₹30,000.00 - ₹45,000.00 per month Benefits: Cell phone reimbursement Health insurance Schedule: Day shift Supplemental Pay: Performance bonus Ability to commute/relocate: Aundh, Pune, Maharashtra: Reliably commute or planning to relocate before starting work (Preferred) Application Question(s): Have you created any innovative/creative drone project? If yes please provide details Work Location: In person Application Deadline: 10/07/2025 Expected Start Date: 21/07/2025

Company Overview: We are a fast-moving startup developing next-generation amphibious drones capable of operating both in air and underwater. Our mission is to push the boundaries of autonomous aerial-marine robotics using open-source technologies like ArduPilot . Role Overview: We are seeking highly motivated Firmware Development Interns with a strong foundation in C++ , embedded systems, and a passion for drones or robotics. You will be directly involved in building custom flight firmware , developing new flight modes, and integrating complex sensor and control logic into ArduPilot for an amphibious drone platform. This is a hands-on role ideal for students, fresh graduates, or junior engineers looking to gain deep experience in real-world drone firmware development. Responsibilities: Work closely with the lead developer to fork and customize the ArduPilot codebase Develop and test new flight modes (e.g., VTOL to underwater transitions) Integrate sensors (IMU, pressure, DVL, sonar, leak detection) via I2C, UART, or CAN Modify and extend hardware abstraction layers (HAL) where necessary Implement control logic for motors, thrusters, and failsafe systems Use SITL and Gazebo to simulate and validate drone behavior Debug and test firmware in live hardware-in-the-loop (HITL) and field conditions Skills & Requirements: Education: Pursuing or recently completed BE/BTech/MTech in: Electronics / Embedded Systems Mechatronics / Robotics Computer Science / Artificial Intelligence Aerospace / Aeronautics / Instrumentation Required Skills: Solid understanding of C++ (OOP, pointers, templates, etc.) Basic knowledge of embedded systems and microcontrollers Understanding of sensors and communication protocols (I2C, SPI, UART) Familiarity with Git and collaborative development workflows Bonus Skills (Nice to Have): Experience with ArduPilot or PX4 ROS/ROS2 exposure (for companion computer interface) Familiarity with Gazebo , SITL , or UAV simulations Exposure to STM32 or ARM Cortex-based platforms Drone enthusiast, DIY projects, or prior drone build experience Location: Remote / Hybrid (based on project stage) Occasional travel for field testing (optional) Duration & Commitment: 3 to 6 months (with potential extension or full-time offer) Flexible hours, but minimum weekly commitment of 20 hours What You'll Gain: Real-world experience in ArduPilot-based firmware engineering Exposure to one of the most advanced autonomous drone stacks Mentorship in aerospace-grade software architecture Opportunity to contribute to open-source / research publications Potential to continue as a paid full-time engineer Job Types: Full-time, Internship Contract length: 3 months Pay: ₹5,000.00 - ₹15,000.00 per month Schedule: Day shift Fixed shift Ability to commute/relocate: Yelahanka, Bengaluru, Karnataka: Reliably commute or planning to relocate before starting work (Preferred) Application Question(s): Are you able to join Immediately? Work Location: In person Application Deadline: 30/06/2025 Expected Start Date: 02/07/2025

Job Purpose JOB DESCRIPTION Planning, Constructing, Monitoring and Developing retail outlet network in Region as per business plan . Responsibilities ACCOUNTABILITIES & RESPONSIBILITIES Accountabilities ACTIVITIES 1 Preparation and review of Engineering Drawings for proposed Retail Outlets and proposed additions at the Retail Outlets. Site selection and site survey is done before preparation of final drawing for the new Retail Outlet before LOI Ensure that the drawing is prepared as per requirement of statutory authorities. Drawings shall be with zero deviations. 2 Construction of facilities at the Retail Outlet as per the drawing and Nayara Energy Quality standards Ensuring kick off meetings/site visits and inspection as required Ensure that the facilities at the Retail Outlet are constructed as per the approved drawings, Engineering Manual and standards/SOPs Ensure that the quality of material being used at the Construction site is as per Nayara standards. Ensure that the material such as tanks, dispensers, tyre inflator, totem, etc are ordered from our registered Vendor only. The MIS to be given on weekly basis to the HO. Material planning to be done in advance and intimated/arranged Ensure that the facilities are constructed as per the drawing only 3 Standardisation Ensure all SOPs and standards are compiled while planning, designing, constructing the RO. Guide the field team and the Franchisees on getting the ROs standardised. 4 Normative Cost Provide estimated NC for the proposed Retail Outlets before LOI and getting sign off. Provide the actual NC for the constructed ROs Prepare the TS documents as per the requirements Ensure the correct NC is included in the TS 5 Maintenance Ensure minimum downtime of all the dispensers Liaison with OEMs for timely and quality response to complaints. Convince Franchisees to tie up for AMC’s. Carry out regular maintenance of CODO’s 6 Training Training Franchisee /Fes on RO operations, Engineering activities, construction, equipment’s, material ,quality work, & safety 7 Inspection of Retail Outlets - during and after construction Inspect under construction ROs at required milestones. Carry out Engineering Inspection of the Retail Outlets to check for Facilities, Safety. Carry out Asset Verification Inspection of Retail Outlets Making RO ready for commissioning and OTP. liquidating punch points timely 8 Development of local contractors / vendors Develop new Vendors for equipment supply Develop contractors for civil work. 9 Retail Outlets Automation Coordinate with vendors for installation of automation equipment and monitor performance. Responsible for technical support on loyalty programs Qualifications SKILLS & KNOWLEDGE Educational Qualifications & Certifications: B.E / B Tech – Civil / Mechanical, preferred knowledge of Auto CAD is required. Relevant (Functional/Level) & Total Years of Experience: 15 to 18 Years Relevant Experience: 8 to 12 years Functional Skills: Basic understanding of Civil, Mechanical and electrical engineering and instrumentations. Knowledge of statutory guidelines related to Petroleum Products (preferred) Knowledge of engineering activities at Retail Outlet (preferred) Complete understanding of equipment’s like Dispenser Unit (preferred) Capability to handle multiple locations at a time. Team building, managing and coordinating QAQC Estimating and costing Project planning Proactive planning Behavioural Skills: Diligence & ownership Customer focus (franchisees) Interpersonal skills Perseverance Sense of responsibility Dependability Result oriented

Experience : 3.00 + years Salary : USD 1629-1740 / month (based on experience) Expected Notice Period : 15 Days Shift : (GMT+05:30) Asia/Kolkata (IST) Opportunity Type : Remote Placement Type : Full Time Contract for 3 Months(40 hrs a week/160 hrs a month) (*Note: This is a requirement for one of Uplers' client - UK IT Services and IT Consulting) What do you need for this opportunity? Must have skills required: Mechatronics, or related discipline Bonus Skills, Fusion 360/SolidWorks/Blender, Isaac Sim, ROS, ROS 2, URDF/xacro, C++, Python, Ubuntu UK IT Services and IT Consulting is Looking for: Job Title: Robotics Simulation & Control Engineer Location: Remote Employment Type: Full-time About The Role We’re looking for a Robotics Simulation & Control Engineer with strong expertise in ROS / ROS 2, robotics control, and simulation environments. You’ll be responsible for developing, testing, and refining robot behaviours in virtual settings, integrating control systems with real hardware via simulation. You’ll also use CAD tools to design environment objects and structures for use in simulated construction or navigation scenarios. This role is ideal for someone who enjoys working at the intersection of robotics, control systems, and digital environments. Key Responsibilities Develop control and behaviour logic for robotic systems using ROS / ROS 2 Build and maintain realistic simulation environments within Isaac Sim Use CAD software (e.g. Fusion 360, SolidWorks, Blender) to create environment assets Design and test control strategies in simulation before deploying to physical robots Interface with hardware teams to support real-world testing and control integration Analyse robot behaviour, sensor feedback, and system performance Maintain documentation and support reproducibility of all simulation workflows Requirements Advanced proficiency in Ubuntu, ROS / ROS 2 and simulation frameworks Strong proficiency in Isaac Sim, with an understanding of physics-based simulation, contact modelling, and GPU acceleration Strong coding skills in Python and C++ Experience with CAD tools for creating environment objects (stl, dae, etc.) and testing scenarios Understanding of robot kinematics, dynamics, control theory, and sensor fusion Experience With URDF/xacro And Robot Description Models Bachelor’s, Master’s or higher degree in Robotics, Mechatronics, Computer Science, or related discipline Bonus Skills Exposure to machine learning or reinforcement learning for control Have exposure to Control systems/Adaptive Control Having exposure to Computer Vision/Image Processing How to apply for this opportunity? Step 1: Click On Apply! And Register or Login on our portal. Step 2: Complete the Screening Form & Upload updated Resume Step 3: Increase your chances to get shortlisted & meet the client for the Interview! About Uplers: Our goal is to make hiring reliable, simple, and fast. Our role will be to help all our talents find and apply for relevant contractual onsite opportunities and progress in their career. We will support any grievances or challenges you may face during the engagement. (Note: There are many more opportunities apart from this on the portal. Depending on the assessments you clear, you can apply for them as well). So, if you are ready for a new challenge, a great work environment, and an opportunity to take your career to the next level, don't hesitate to apply today. We are waiting for you!

Key Responsibilities Develop and deliver training sessions on Arduino, ARM Microcontroller, IoT, Embedded Systems, Raspberry Pi, and ROS for students. Create hands-on projects and labs to enhance learning and skill development. Provide technical guidance and support to team members working on robotics projects. Stay up-to-date on the latest advancements in robotics technology and share knowledge with the team. Collaborate with other trainers and developers to continuously improve training materials and curriculum in the schools. Flexible for the schools-Robotics Labs, and training centers. Contribute to the overall growth and success of Leap Robots through your dedication and passion for robotics training. About Company: Leap Robots is born to set robotics trends in education and agriculture. We are building products that help students to build applications in the field of robotics. We are dealing with two major products at present, Booyaka 1.0 - STEM-based educational DIY kit for school students and Booyaka 2.0 - IoT based DIY kit for engineers. We also have international affiliations, with Leap Robots representing IYRC, Malaysia, as chair member from India.

2.1. Key Responsibilities Develop systems for guidance, navigation, and control (GNC). Design and integrate embedded systems with sensors and controllers. Integrate and characterize sensors including EO, LiDAR, sonar, and radar. Implement algorithms for path planning and vehicle coordination. Apply control strategies such as PID and MPC. Enhance tracking, collision avoidance, and classification systems. Conduct lab/field tests and SITL simulations. Prepare technical documentation and support hardware integration. 2.2. Candidate Profile Qualifications: Bachelor's or Master's in Electronics, Mechatronics, Automation, or related engineering disciplines/equivalent professional experience. 2.3. Skills & Experience Proficiency in C/C++ for embedded systems. Experience with STM32 or equivalent platforms. Circuit design, assembly, and debugging. Hands-on with electromechanical integration and test tools. Familiarity with platforms like Pixhawk, PX4, Ardupilot. Working knowledge of MATLAB, Python, ROS/ROS2. Strong design, integration, and testing skills. Good command of productivity tools like MS Office. 2.4. Personal Attributes Excellent communication and interpersonal skills. Analytical problem-solving ability. Leadership and project management competence. Commitment to continuous learning and quality delivery.

Experience : 3.00 + years Salary : USD 1629-1740 / month (based on experience) Expected Notice Period : 15 Days Shift : (GMT+05:30) Asia/Kolkata (IST) Opportunity Type : Remote Placement Type : Full Time Contract for 3 Months(40 hrs a week/160 hrs a month) (*Note: This is a requirement for one of Uplers' client - UK IT Services and IT Consulting) What do you need for this opportunity? Must have skills required: Mechatronics, or related discipline Bonus Skills, Fusion 360/SolidWorks/Blender, Isaac Sim, ROS, ROS 2, URDF/xacro, C++, Python, Ubuntu UK IT Services and IT Consulting is Looking for: Job Title: Robotics Simulation & Control Engineer Location: Remote Employment Type: Full-time About The Role We’re looking for a Robotics Simulation & Control Engineer with strong expertise in ROS / ROS 2, robotics control, and simulation environments. You’ll be responsible for developing, testing, and refining robot behaviours in virtual settings, integrating control systems with real hardware via simulation. You’ll also use CAD tools to design environment objects and structures for use in simulated construction or navigation scenarios. This role is ideal for someone who enjoys working at the intersection of robotics, control systems, and digital environments. Key Responsibilities Develop control and behaviour logic for robotic systems using ROS / ROS 2 Build and maintain realistic simulation environments within Isaac Sim Use CAD software (e.g. Fusion 360, SolidWorks, Blender) to create environment assets Design and test control strategies in simulation before deploying to physical robots Interface with hardware teams to support real-world testing and control integration Analyse robot behaviour, sensor feedback, and system performance Maintain documentation and support reproducibility of all simulation workflows Requirements Advanced proficiency in Ubuntu, ROS / ROS 2 and simulation frameworks Strong proficiency in Isaac Sim, with an understanding of physics-based simulation, contact modelling, and GPU acceleration Strong coding skills in Python and C++ Experience with CAD tools for creating environment objects (stl, dae, etc.) and testing scenarios Understanding of robot kinematics, dynamics, control theory, and sensor fusion Experience With URDF/xacro And Robot Description Models Bachelor’s, Master’s or higher degree in Robotics, Mechatronics, Computer Science, or related discipline Bonus Skills Exposure to machine learning or reinforcement learning for control Have exposure to Control systems/Adaptive Control Having exposure to Computer Vision/Image Processing How to apply for this opportunity? Step 1: Click On Apply! And Register or Login on our portal. Step 2: Complete the Screening Form & Upload updated Resume Step 3: Increase your chances to get shortlisted & meet the client for the Interview! About Uplers: Our goal is to make hiring reliable, simple, and fast. Our role will be to help all our talents find and apply for relevant contractual onsite opportunities and progress in their career. We will support any grievances or challenges you may face during the engagement. (Note: There are many more opportunities apart from this on the portal. Depending on the assessments you clear, you can apply for them as well). So, if you are ready for a new challenge, a great work environment, and an opportunity to take your career to the next level, don't hesitate to apply today. We are waiting for you!

🚀 Founding Computer Vision Engineer – Drones | Equity-Only | Gurgaon → Bangalore Company: Lakir Technologies / Drone Mandi Location: Start in Gurgaon , later shift to Bangalore Compensation: Equity-only (We’ll take care of your living, workspace & essentials) Start Date: ASAP About the Role We're hiring a core founding team member with deep expertise in Computer Vision to help build India’s first Stereo Vision Drone Platform for autonomous mapping, agriculture, and industrial inspection. You'll work hands-on on: Visual SLAM & 3D environment mapping Depth estimation , stereo camera systems, and real-time point cloud processing Drone navigation & path planning Optimisation for Jetson TX2 / TX2 NX platforms What We’re Looking For experience working with SLAM / Visual Odometry Experience with stereo vision, and sensor fusion Good grasp of ROS1/2 , OpenCV, and real-time systems Past experience in drone path planning , obstacle avoidance, or related autonomy Willing to work on equity only (we’ll take care of housing and essentials) Open to starting from Gurgaon , relocating to Bangalore later Ping me directly on rohan@lakirtechnologies.com or call me directly after pining me on linkedin Let’s shape the future of autonomous drones — together. #ComputerVision #DroneJobs #StartupHiring #SLAM #ROS #EmbeddedVision #GurgaonJobs #BangaloreJobs #EquityRole #FoundingTeam

Role: Robotics Systems Intern – Design & Simulation 📍 Location : Maker Village, KINFRA Hi-Tech Park, Kalamassery, Kochi, Kerala 📌 Job Type : Paid Internship (On-site, Full-time) | Duration : 3 Months About Us Grafito Innovations is a deep-tech startup building advanced precision farming automation solutions . Our mission is to increase agricultural efficiency and productivity while promoting sustainable and eco-friendly farming practices through robotics, AI, and cutting-edge engineering . What You’ll Do As a Design & Simulation Intern , you will: Design and export CAD assemblies into simulation environments like NVIDIA Isaac Sim, MuJoCo, PyBullet, CoppeliaSim, Webots, Gazebo , or similar tools. Simulate actuators, sensors (encoders, limit switches, cameras), and robotic behaviors in a digital twin environment. Contribute to the mechanical design process to ensure physical feasibility of designs and assemblies. Collaborate with embedded software engineers to validate motion profiles . Integrate Onshape simulation add-ons with current design workflows. ✅ Must-Have Skills Prior experience in CAD modeling (assemblies, constraints, mechanical detailing) – mandatory Simulation experience using MuJoCo or similar tools – mandatory A clear proof of work : Portfolio or GitHub repo showing projects involving both CAD and simulation Proficiency in Python and/or C++ , with strong mathematical and problem-solving skills Experience with robotics system programming Understanding of motion control algorithms (e.g., PID, trajectory planning) Familiarity with simulation tools like Webots , Gazebo , or equivalents 💼 Good to Have Knowledge of ROS 2 (Robot Operating System) Experience integrating CAD models into simulation pipelines Academic or personal projects related to digital twins , robotic simulators , or kinematic modeling Background in mechatronics, robotics, or control systems 💰 Compensation Stipend : ₹15,000 – ₹18,000/month 🌱 Why Join Us? Contribute to end-to-end product development – from prototyping to field testing Collaborate with a multidisciplinary team of passionate engineers Get exposure to the deep-tech startup ecosystem with real-world agricultural impact

Job Title: Store Manager Location: Calicut Reports To: Area / Zonal Manager Job Purpose: To lead the store team in delivering excellent customer service, achieving sales targets, ensuring operational excellence, and upholding the brand image of the store. Key Responsibilities: Sales & Profitability Drive sales to achieve monthly and annual store targets. Analyze store performance and KPIs (conversion rate, ATV, UPT, ROS, etc.) and take corrective actions. Identify opportunities to grow business through local marketing and customer engagement. Team Leadership & Development Recruit, train, coach, and develop store staff. Set clear objectives, conduct performance reviews, and ensure high team morale. Create a positive work environment focused on teamwork and accountability. Customer Service Ensure exceptional customer experience at all touchpoints. Resolve customer issues or complaints promptly and professionally. Operations & Compliance Manage store operations including stock management, cash handling, and adherence to SOPs. Oversee visual merchandising to ensure store displays align with brand guidelines. Ensure compliance with safety, security, and company policies. Inventory & Loss Prevention Monitor stock levels, shrinkage, and implement measures to prevent loss. Coordinate regular stock counts and audits. Key Skills & Competencies: Strong leadership and team management skills Excellent communication and interpersonal abilities Sales-driven and result-oriented mindset Good analytical and problem-solving skills Ability to multitask and work under pressure Passion for fashion retail and understanding of trends Proficient in MS Office / retail management systems / POS Qualifications: Graduate in any discipline (MBA / Diploma in Retail Management preferred) 4-6 years of retail experience with at least 1-2 years in a supervisory/managerial role Job Type: Full-time Pay: ₹35,000.00 - ₹40,000.00 per month Benefits: Health insurance Provident Fund Schedule: Day shift Supplemental Pay: Yearly bonus Language: Hindi (Preferred) Work Location: In person

🏢 Company: The Indian Garage Co (TIGC) 📍 Location: Bangalore 🕒 Joining: Immediate joiners preferred 📌 About TIGC TIGC is one of India's fastest-growing homegrown fashion brands, known for its bold, trend-led menswear. With over 30 lakh units sold monthly across marketplaces and D2C, and a loyal Gen Z following, we’re now building the next phase of fashion-led commerce through our own website and app. We're backed by an energetic and lean team across marketing, tech, design, and ops — and we’re looking to supercharge our planning function to keep up with our growth momentum. 🎯 Role Overview We’re hiring a Merchandise & Inventory Planner to drive the right inventory availability, category performance, and sell-through across our D2C channels (Web & App). You’ll work closely with cross-functional teams (design, marketing, performance, warehouse, and tech) to ensure stock is optimized for growth and efficiency. 💼 Key Responsibilities - Plan assortment and inventory across D2C channels based on past trends, category insights & new launches - Collaborate with design and marketing to sync supply with campaign and product drops - Analyze sell-through, ROS (rate of sale), and optimize replenishment cycles - Monitor inventory health (freshness, ageing, coverage) and work with ops for liquidation plans - Create weekly reports and dashboards to track key KPIs: WOC, revenue targets, inventory turns - Maintain the product lifecycle: from launch to markdowns - Forecast demand for BAU & sale periods using data-driven models ✅ Requirements - 2-4 years of experience in merchandising/inventory/supply planning, preferably in fashion D2C or retail/ecomm - Strong command over Excel/Google Sheets (pivot, lookup, dashboards etc.) - Familiarity with inventory tools/ERP systems (Unicommerce, Vinculum, etc.) is a plus - Analytical mindset and ability to translate data into actionable plans - Fast learner, team player, ownership-driven attitude 🚀 Why Join TIGC? - Work directly with the core team building one of India’s most exciting fashion brands - Fast-paced, zero-red-tape environment where ideas turn into action quickly - High visibility and ownership – your decisions impact business outcomes - Career growth in a high-scale, digitally-led fashion brand - We're not just selling clothes — we're building culture, drops, and community 💬 Who is this Role For? If you love numbers *and* fashion, and have a knack for turning data into decisions — TIGC is the place for you. We're not a corporate giant with layers of hierarchy. We're a builder’s brand. You’ll be at the heart of planning for campaigns, launches, and inventory movements that reach millions. If you’re obsessed with keeping the right styles in stock (and moving fast), and love working in lean, action-driven teams — we’d love to have you onboard. Immediate joiners get priority — come be a part of something exciting, fast, and fashionable.

Job Title: Robotics Engineer - ROS2 Development Job Overview : We are seeking a highly skilled and motivated Robotics Engineers with a strong focus on ROS2 development to join our dynamic team. As a Robotics Engineer, you will be responsible for designing, developing, and implementing advanced robotic systems and applications using the Robot Operating System 2 (ROS2). You need to develop the behavioral and control systems, including planning and navigation needed for autonomous robots. This role requires a deep understanding of robotic software architecture, proficiency in ROS2, and experience with hardware integration and real-time systems and expertise in URDF (Unified Robot Description Format). Key Responsibilities : Design and Development : Develop robust and scalable robotic applications using ROS2. Implement software for various robotic systems, ensuring high performance and reliability. Hand-on with developing ROS2 nodes, Services/Clients, Publishers/Subscriber. Lead and develop path/motion planning algorithms that include route planning, trajectory optimization, decision making, and open space planning. Good understandings of Robot dynamics, kinematics and modeling. System Integration : Integrate sensors, actuators, and other hardware components with robotic systems. Ensure seamless communication between hardware and software layers. Experienced on integration with perception sensors such as IMU, GPS, Stereo Cameras, Lidar, Radar, and various other sensors. URDF Modeling : Create and maintain accurate URDF models for robotic systems. Ensure models accurately represent the physical configuration and kinematics of the robots. Algorithm Implementation : Implement and optimize algorithms for perception, localization, mapping, navigation, and control. Simulation and Testing : Utilize simulation tools to test and validate robotic systems in virtual environments like Gazebo, Rviz2 and Unity. Perform rigorous testing in real-world scenarios to ensure system robustness. Documentation : Create and maintain comprehensive documentation for system architecture, design decisions, algorithms, and user guides. Research and Development : Stay updated with the latest advancements in robotics and ROS2, and URDF. Contribute to the continuous improvement of development processes and tools. Education Background: B.Tech (Mechatronics, Robotics , Mechanical, Electrical)

Location : Pune and Gurgaon (hybrid). Industry : Robotics. Position : Sr Engineer. What We Need We're seeking a SLAM expert with several years of experience to join the Perception team at the team senior engineer level. As a SLAM Expert, you will play a technical development role in developing and implementing state-of-the-art SLAM algorithms and systems to advance our cutting-edge fulfillment technology. We are looking for people who thrive in a creative, collaborative, and agile development environment. Job Description Lead the design and development of SLAM-based navigation systems for robotic platforms. Utilize SLAM algorithms and techniques to enable accurate localization and mapping in various environments. Develop, optimize, and implement SLAM algorithms and systems for real-time applications. Conduct research and stay up to date with the latest advancements in SLAM and related fields. Design and execute experiments to evaluate the performance and robustness of SLAM algorithms and systems. Collaborate with cross-functional teams, including software engineers, computer vision experts, and robotics engineers, to integrate SLAM solutions into various projects. Provide technical guidance and support to team members working on SLAM-related projects. Identify and analyze challenges in SLAM implementation and propose innovative solutions. Contribute to the development of tools and frameworks to streamline the SLAM development process. Document and communicate research findings, algorithms, and technical specifications effectively. Skill Sets Required A Bachelors /master's or Ph. degree in Computer Science, Robotics or a related field. 1-6 years of demonstrated experience in SLAM research and development, with a strong publication record in relevant conferences and journals. Expertise in various SLAM techniques, such as visual SLAM, LiDAR SLAM, visual-inertial SLAM, graph-based SLAM, Kalman filtering, bundle adjustment, structure from motion, etc. Proficiency in programming languages commonly used in SLAM, such as C++ and Python. Solid understanding of computer vision, sensor fusion, probabilistic robotics, and optimization algorithms. Experience with popular SLAM libraries and frameworks, such as ROS, OpenCV, PCL, GTSAM, and g2o. Strong mathematical and analytical skills, with the ability to apply advanced mathematical concepts to solve SLAM challenges. Strong communication and teamwork skills to collaborate effectively with interdisciplinary teams. Prior experience working with autonomous systems and robotics. Benefits Competitive salary with performance-based bonuses. Comprehensive health and wellness benefits. Opportunities for professional development and continued education. Collaborative and innovative work environment (ref:hirist.tech)

We are looking for a passionate Embedded Software Engineer to join our Autonomous Surveillance Vehicle (ASV) project. The role involves developing ROS-integrated firmware on ESP32, working with hardware design, and integrating various basic sensors in real-world robotic scenarios. Experience: 0.6 – 1.5 Years (Relevant Experience Only) Work Mode: Work From Office (WFO) Priority: Immediate / Maximum 15-Day Notice Period Acceptable Budget: ₹10,000 – ₹12,000 Monthly (Exclusive of Professional Tax & Insurance Deductions) Interview Rounds: 3 (HR, Technical, and Practical) Working Days: 5 Days a Week (Monday to Friday) | 9:30 AM – 6:30 PM Leave Policy: 8 Paid Leaves *Terms Applied Notice Period: 1 Month (Mandatory) – If Bypassed, No Relieving/Experience Letter Will Be Issued Provisional Period: 90 Days Commitment Period (Bond): Provisional Period + 365 Days Key Responsibilities: Develop embedded firmware for ESP32-based systems integrated with ROS Interface and calibrate essential sensors: Lidar, GPS, IMU, IR, Ultrasonic, etc. Create and review custom PCB layouts for embedded circuits Collaborate on mechanical design using SolidWorks Perform testing, optimization, and deployment of ASV firmware in field conditions Requirements: Proficiency in embedded C/C++, ESP-IDF or Arduino for ESP32 Hands-on experience with ROS, Linux, and sensor communication protocols (UART, SPI, I2C) Understanding of basic PCB design principles (preferably in KiCAD or Altium) Familiarity with SolidWorks for mechanical component planning Strong debugging, documentation, and teamwork skills

We’re looking for a Drone Hardware Engineer with a strong foundation in UAV systems and hands-on experience in building multirotor drones. You'll design, build, and integrate drone hardware, collaborate with cross-functional teams, and be directly involved in the development of swarm-capable aerial systems. Key Responsibilities: Design, build, and test quadcopter/multi-rotor drone frames Select propulsion systems, ESCs, and power components Integrate sensors (GPS, IMU, cameras, LiDAR) and embedded systems Configure flight control firmware (PX4, ArduPilot) Conduct bench and flight tests; tune control systems Collaborate with autonomy and software teams for sensor and comms integration Document the entire hardware development and testing process Qualifications: Bachelor's or Master’s in Aerospace, Mechanical, Mechatronics, or Robotics Strong knowledge of drone flight dynamics and control systems Experience assembling and flying custom drones Familiarity with PX4 or ArduPilot, and simulation tools (Gazebo, AirSim) Exposure to embedded systems, sensor integration, and electronics Ability to use CAD tools like SolidWorks/Fusion 360 Preferred Skills (Good to Have): Swarm robotics or inter-drone communication (UWB, Wi-Fi mesh, etc.) Power management, RF systems, or thermal design Computer vision integration for navigation and object tracking ROS, MAVLink, or real-time telemetry system knowledge Job Types: Full-time, Permanent Pay: ₹18,000.00 - ₹30,000.00 per month Schedule: Day shift Ability to commute/relocate: Thiruvananthapuram, Kerala: Reliably commute or planning to relocate before starting work (Required) Work Location: In person

About the Role: We are seeking an experienced 3D SLAM (Simultaneous Localization and Mapping) Computer Vision Engineer to join our innovative team. The ideal candidate will have a strong background in computer vision, robotics, and software development, with a focus on 3D perception and SLAM algorithms. You will work on cutting-edge projects that involve building real-time mapping and localization systems, contributing to both research and practical deployment. Key Responsibilities: Design, develop, and implement state-of-the-art 3D SLAM algorithms for real-time applications. Collaborate with cross-functional teams to integrate SLAM solutions with hardware and other software components. Conduct in-depth research and stay updated with the latest advancements in SLAM, computer vision, and related fields. Optimize code for real-time performance and robustness across different environments. Develop and maintain the software infrastructure for testing and deploying SLAM systems. Analyze and process sensor data from various sources, including LiDAR, depth cameras, and IMUs. Troubleshoot and debug issues related to 3D perception, mapping, and localization. Requirements: Education : Bachelor's or Master's degree in Computer Science, Robotics, Electrical Engineering, or a related field. PhD is a plus. Experience : 3-5 years of experience in computer vision or robotics, with a focus on SLAM and 3D perception. Technical Skills : Proficiency in programming languages such as C++ and Python. Strong knowledge of computer vision libraries (e.g., OpenCV, PCL) and frameworks. Experience with SLAM algorithms (e.g., ORB-SLAM, RTAB-Map, LOAM). Familiarity with 3D point cloud processing, sensor fusion, and Kalman filters. Mathematics : Strong background in linear algebra, probability theory, and optimization techniques. Problem-Solving : Excellent analytical skills for troubleshooting and performance tuning. Communication : Ability to effectively collaborate with cross-functional teams and present technical information clearly. Preferred Qualifications: Experience with robotics frameworks such as ROS (Robot Operating System). Knowledge of GPU programming and parallel processing (e.g., CUDA). Experience working with 3D reconstruction, photogrammetry, or AR/VR applications. Familiarity with deep learning frameworks (e.g., TensorFlow, PyTorch) for computer vision tasks. Job Type: Full-time Pay: ₹500,000.00 - ₹1,500,000.00 per year

About Company: Evolve Robot Lab is the India's first robot innovation lab for Robotics Engineering & Artificial Intelligence Solution. Robotics research company, with the grand vision to improve the quality of life in the very part of India with various deep tech solutions. Who we are: Robotics start-up with young creative team based out of Madras, Tamilnadu We are making affordable robotics product for both industrial & military application. Our Edu-Tech training facilitate to inspire & educate the next 10 million young generation of innovators, engineers, scientist & artists in the field of Robotics. Our specialization : Artificial Intelligence & Data Science Mobile Robotics Legged Robotics What We Do: STEM Education: Developing Young Minds for the Future through quality teaching on robotics tool Industrial Service: Our product development include Robotics research and automation for industries and home applications. Artificial Intelligence Solution for 21st Century Digital landscape. About the Internship: Selected intern's day-to-day responsibilities include: 1. Work on Artificial Intelligence 2. Work on developing Algorithms 3. Handle Designing and Development of AI Robots. 4. Handle daily task completion using AI, MATLAB, ROS, CAD, Vrep 5. Programming chatbot 6. Autonomous Robot Designing 7. Training Clients on AI technology Skills required: Arduino, Robotics, Raspberry Pi, Programming, CAD, Presentation, Problem-solving Who can apply: 1. Only students in a year of study or freshers can. 2. Candidates having relevant skills and interests. 3. Candidates who have already graduated or are currently in any year of study. APPLY NOW : https://forms.gle/4q9LaN1HQ2jK9XPR9 Preferable Candidates : Electronics & Communication Engineering, Information Technology, Mechatronics Engineering, Robotics & Automation Engineering. Perks: Stipend based on Performance, Internship Completion Certificate, Letter of recommendation Experience0 - 1 Years Job Types: Full-time, Part-time, Internship Contract length: 3 months Pay: ₹12,000.00 - ₹22,000.00 per month Benefits: Flexible schedule Schedule: Day shift Evening shift Monday to Friday Morning shift Supplemental Pay: Performance bonus Work Location: In person

About Company: Evolve Robot Lab is the India's first robot innovation lab for Robotics Engineering & Artificial Intelligence Solution. Robotics research company, with the grand vision to improve the quality of life in the very part of India with various deep tech solutions. Who we are: Robotics start-up with young creative team based out of Madras, Tamilnadu We are making affordable robotics product for both industrial & military application. Our Edu-Tech training facilitate to inspire & educate the next 10 million young generation of innovators, engineers, scientist & artists in the field of Robotics. Our specialization : Artificial Intelligence & Data Science Mobile Robotics Legged Robotics What We Do: STEM Education: Developing Young Minds for the Future through quality teaching on robotics tool Industrial Service: Our product development include Robotics research and automation for industries and home applications. Artificial Intelligence Solution for 21st Century Digital landscape. About the Internship: Selected intern's day-to-day responsibilities include: 1. Work on Artificial Intelligence , Gen AI 2. Work on developing Algorithms 3. Handle Designing and Development of AI Robots. 4. Handle daily task completion using AI, MATLAB, ROS, CAD, Vrep 5. Programming chatbot 6. Autonomous Robot Designing 7. Training Clients on AI technology Skills required: Arduino, Robotics, Raspberry Pi, Programming, CAD, Presentation, Problem-solving Who can apply: 1. Only students in a year of study and Freshers 2. Candidates having relevant skills and interests. 3. Candidates who have already graduated or are currently in any year of study. APPLY NOW : https://forms.gle/4q9LaN1HQ2jK9XPR9 Preferable Candidates : Artificial Intelligence & Data Science, Computer Science & Electronics & Communication Engineering, Information Technology Perks: Stipend based on Performance, Internship Completion Certificate, Letter of recommendation Experience0 - 1Years Job Types: Full-time, Part-time, Internship Contract length: 3 months Pay: ₹12,000.00 - ₹22,000.00 per month Benefits: Flexible schedule Schedule: Day shift Evening shift Morning shift Supplemental Pay: Performance bonus Work Location: In person

We are seeking a highly skilled and experienced C++ Software Engineer to architect, design, and implement advanced robotics and distributed systems. You will play a key role in building robust, scalable, and testable modules for Warehouse Robotics platforms and related distributed control systems. Roles and Responsibilities: Architect, design, and implement complex C++ modules for robotics simulation and distributed agent control. Create and extend mock/test agents to simulate real-world robot behaviors for system validation and CI. Design robust APIs and interfaces for agent coordination, task assignment, and status reporting. Optimize code for performance, reliability, and maintainability in multi-threaded and real-time environments. Collaborate with cross-functional teams (robotics, cloud, QA) to deliver production-quality code. Write and maintain high-quality unit, integration, and system tests. Perform code reviews, mentor junior engineers, and contribute to technical leadership. Requirements Intermediate/Expert-level C++ (11/14/17/20): Deep understanding of modern C++ features (move semantics, smart pointers, lambdas, templates, type traits, SFINAE, etc.) Strong grasp of object-oriented, generic, and functional programming paradigms. Distributed Intelligence & Simulation: Experience architecting and simulating distributed agent systems. Knowledge of message-driven architectures and asynchronous event handling & Hierarchical State Machines. Software Architecture & Design: Proficient in designing extensible, modular, and testable C++ systems. Solid grasp of design patterns & Behaviour trees (Factory, Observer, Strategy, Command, etc.). Testing & Mocking: Experience with test-driven development (TDD), unit testing, and mocking frameworks. Ability to design and implement mock agents and test harnesses for complex systems. Concurrency & Real-Time Programming: Proficient in multi-threading, synchronization primitives, and real-time constraints. Familiarity with ROS timers and callback mechanisms. Mathematics & Geometry: Understanding of coordinate transformations, quaternions, and pose/orientation math. Code Quality: Strong commitment to code quality, documentation, and code reviews. Experience with static/dynamic analysis tools and CI/CD pipelines. Benefits Why us? Exciting and challenging problems are addressed using wide-ranging technologies and tools. Competitive salary Great team culture, peers and workplace

We’re looking for a Drone Hardware Engineer with a strong foundation in UAV systems and hands-on experience in building multirotor drones. You'll design, build, and integrate drone hardware, collaborate with cross-functional teams, and be directly involved in the development of swarm-capable aerial systems. Key Responsibilities: Design, build, and test quadcopter/multi-rotor drone frames Select propulsion systems, ESCs, and power components Integrate sensors (GPS, IMU, cameras, LiDAR) and embedded systems Configure flight control firmware (PX4, ArduPilot) Conduct bench and flight tests; tune control systems Collaborate with autonomy and software teams for sensor and comms integration Document the entire hardware development and testing process Qualifications: Bachelor's or Master’s in Aerospace, Mechanical, Mechatronics, or Robotics Strong knowledge of drone flight dynamics and control systems Experience assembling and flying custom drones Familiarity with PX4 or ArduPilot, and simulation tools (Gazebo, AirSim) Exposure to embedded systems, sensor integration, and electronics Ability to use CAD tools like SolidWorks/Fusion 360 Preferred Skills (Good to Have): Swarm robotics or inter-drone communication (UWB, Wi-Fi mesh, etc.) Power management, RF systems, or thermal design Computer vision integration for navigation and object tracking ROS, MAVLink, or real-time telemetry system knowledge Job Types: Full-time, Permanent Pay: ₹18,000.00 - ₹30,000.00 per month Schedule: Day shift Ability to commute/relocate: Thiruvananthapuram, Kerala: Reliably commute or planning to relocate before starting work (Required) Work Location: In person

The Amrita Vishwa Vidyapeetham, Coimbatore campus, is inviting applications from qualified candidates for the post of Assistant Professor For details contact : mechcp@cb.amrita.edu Job Tilte Assistant Professor Location Coimbatore, Tamil Nadu Required Number 1 Qualification B.E., / B.Tech and MTech in Mechanical / Mechatronics/ECE/ EEE / CSE or allied specialization and PhD in Automation / Mechatronics / Robotics Job Description B.E., / B.Tech and MTech in Mechanical / Mechatronics/ECE/ EEE / CSE or allied specialization Ph.D. with expertise in Robotics / AI/ Automation / Mechatronics Good academic track record with quality research publications Programming skills - C, C++, Python, Matlab, ROS, Robot programming languages, LAB View, Automation Studio Teaching courses – Mobile Robots; Robot Dynamics & Control, Robot Navigation, IOT, Mechatronics System Design, Embedded Systems; Deep Learning; Reinforcement Learning Job Category Teaching Last Date to Apply July 10, 2025