Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. PNR implementation for Qualcomm SoC's Good hands-on experience on Floorplanning, PNR and STA flows Good knowledge on Placement/Clock Tree Synthesis (CTS), optimization, etc Good understanding on signoff domains"“ LEC/CLP/PDN knowledge, etc Good knowledge on Unix/Linux "“ Perl/TCL fundamentals/scripting Principal Duties and responsibilities: Complete ownership on PNR implementation (Floorplanning, Placement, CTS, post_route,etc) on latest nodes. Signoff knowledge is mandatory (STA,Power analysis,FV, low power verification, PV,etc) Quick learner with good analytical and problem solving skills Qualifications: 5+ years Hardware Engineering experience or related work experience. 4+ years experience with PNR flow in latest tech nodes (e.g., 4nm/5nm/7nm/10nm

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. Preferred Qualifications: Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 3+ years of Hardware Engineering or related work experience. 2+ years of experience with circuit design (e.g., digital, analog, RF). 2+ years of experience utilizing schematic capture and circuit simulation software. 2+ years of experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, RF tools, etc. Principal Duties and Responsibilities: Applies Hardware knowledge and experience to plan, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems. Integrates features and functionality into hardware designs in line with proposals or roadmaps. Conducts simulations and analyses of designs as well as implements designs with the best power, performance, and area. Collaborates with teams (e.g., design, verification, validation, software and systems engineering, architecture development teams, etc.) to implement new requirements and incorporate the latest test solutions in the production program to improve the yield, test time, and quality. Evaluates, characterizes, and develops the manufacturing solutions for leading edge products in processes and bring-up product to meet customer expectations and schedules. Evaluates reliability of materials, properties, and techniques and brings innovation, automation, and optimization to maximize productivity. Assists in the assessment of complex design features to identify potential flaws, compatibility issues, and/or compliance issues. Writes detailed technical documentation for Hardware projects. Level of Responsibility: Works independently with minimal supervision. Decision-making may affect work beyond immediate work group. Requires verbal and written communication skills to convey information. May require basic negotiation, influence, tact, etc. Tasks require multiple steps which can be performed in various orders; some planning, problem-solving, and prioritization must occur to complete the tasks effectively.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. Qualifications: Bachelor"™s or Master"™s degree from a top-tier institute. 2- 5 years of experience in physical design from product-based companies. Experience: Proven experience in managing complex subsystems and small teams. Proficiency in synthesis, place and route (PnR), and sign-off convergence, including Static Timing Analysis (STA) and sign-off optimizations. Job Requirements: Expertise in meeting demanding Power, Performance, and Area (PPA) requirements for complex subsystems/System on Chips (SoCs), place and route, and IP integration. Experience in low power design implementation, including Unified Power Format (UPF), multi-voltage domains, and power gating. Familiarity with ASIC design flows and physical design methodologies. Strong understanding of circuit design, device physics, and deep sub-micron technology. Experience working on multiple technology nodes in advanced processes. Proficiency in automation to drive improvements in PPA.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. PNR implementation for Qualcomm SoC's Good hands-on experience on Floorplanning, PNR and STA flows Good knowledge on Placement/Clock Tree Synthesis (CTS), optimization, etc Good understanding on signoff domains"“ LEC/CLP/PDN knowledge, etc Good knowledge on Unix/Linux "“ Perl/TCL fundamentals/scripting Principal Duties and responsibilities: Complete ownership on PNR implementation (Floorplanning, Placement, CTS, post_route,etc) on latest nodes. Signoff knowledge is mandatory (STA,Power analysis,FV, low power verification, PV,etc) Quick learner with good analytical and problem solving skills Qualifications: 4+ years Hardware Engineering experience or related work experience. 3+ years experience with PNR flow in latest tech nodes (e.g., 4nm/5nm/7nm/10nm

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. Job Role * Familiar with Physical Design Life cycle of chip development, especially Floorplanning and PnR * Hands on PD execution at block/SoC level along with PPA improvements * Strong understanding of the technology and PD Flow Methodology enablement. * Work with Physical design engineers to rollout robust, identify areas for flow improvement methodologies. (area/power/performance/convergence), develop plans and deploy/support them* Provide tool support and issue debugging services to physical design team engineers across various sites* Develop and maintain 3rd party tool integration and productivity enhancement routines * Understand advance tech PNR and STA concepts and methodologies and work closely with EDA vendors to deploy solutions. Skill Set * Strong programming experience & Proficiency in Python/Tcl/C++ * Understand physical design flows using Innovus/fc/icc2 tools* Knowledge of one of Encounter/Innovus or FC (or other equivalent PNR tool) is mandatory* Basic understanding of Timing/Formal verification/Physical verification/extraction are desired* Ability to ramp-up in new areas, be a good team player and excellent communication skills desired Experience 3-5 years of experience with the Place-and-route and timing closer and power analysis environment is required Niche Skills Handling support tools like Encounter/Innovus/edi/fc/Icc2 (or other equivalent PNR tool). One or more of the above is mandatory*

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. We are seeking a dedicated and skilled EM/IR Methodology Engineer to join our team. The role involves developing and maintaining methodologies for Electromigration (EM) and Voltage Drop (IR) analysis to ensure robust and reliable designs in advanced semiconductor technologies. The ideal candidate will work closely with cross-functional teams to optimize power delivery networks and ensure design compliance with EM/IR standards. Key Responsibilities: Develop, validate, and optimize methodologies for Electromigration (EM) and Voltage Drop (IR) analysis for advanced semiconductor designs. Collaborate with design, CAD, and physical implementation teams to optimize power delivery networks. Enhance and automate workflows to improve PDN analysis efficiency. Partner with EDA tool vendors to enhance and customize EM/IR analysis tools. Support design teams in EM/IR verification and sign-off. Required Skills and Qualifications: Bachelor"™s or Master"™s degree in Electronics, Electrical Engineering, or a related field. 3-5 years of experience in EM/IR analysis or physical design methodology. Strong understanding of Electromigration (EM) and Voltage Drop (IR) concepts and their impact on circuit reliability. Hands-on experience with EM/IR analysis tools such as Voltus , RedHawk , Totem , or equivalent. Preferable if worked on 2.5D/3D-IC , CoWoS technologies. Exposure to AI/ML concepts will be bonus. Proficiency in scripting languages such as Python , Perl , or Tcl to automate workflows. Good understanding of STA concepts. Strong problem-solving and analytical skills. Excellent communication and teamwork skills.

Job Area: Engineering Services Group, Engineering Services Group > Layout Engineer General Summary: Develops block, macro, or chip level layouts and floorplans according to project requirements, specifications, and design schematics. Applies understanding of design manuals, established processes, layout elements, and basic electronic principles to create accurate designs that meet project needs. Conducts analyses, tests, and verifies designs using different tools and techniques to identify and troubleshoot issues, and stays abreast of new verification methods. Works with multiple internal and external stakeholders to align on projects, provide updates, and resolve issues. Minimum Qualifications: Bachelor's degree in Electrical Engineering, Computer Science, Mathematics, Electronic Engineering, or related field and 2+ years of experience designing custom layouts in relevant domain (e.g., analog, mixed signal, RF, digital design), or related work experience. OR Associate's degree in Computer Science, Mathematics, Electrical Engineering or related field and 4+ years of experience designing custom layouts in relevant domain (e.g., analog, mixed signal, RF, digital design), or related work experience. OR High School diploma or equivalent and 6+ years of experience designing custom layouts in relevant domain (e.g., analog, mixed signal, RF, digital design), or related work experience. 2+ years of experience using layout design and verification tools (e.g., cadence, LVS, rmap). Solid experience of 3 to 6 years in developing high speed IO/ESD/Analog layout design. Expertise in working on FinFet layouts in lower nodes, preference to TSMCN 7nm and below. Expertise in using the best and latest features of Cadence VXL and Calibre DRC/LVS. Basic understanding of IO/ESD designs. Knowledge on Basic SKILL/PERL. Capable of working independently and with team and getting work done with contract work force. The ability to work & communicate effectively with global engineering teams.

Ring organizations mission is Keeping people close to what s important . We innovate rapidly on behalf of our customers and deliver ambiguous and ambitious technical products. As a Software Development Engineer - Ring you will engage with an experienced cross-disciplinary team to conceive and design innovative consumer products. Vertically your ownership can span across application, device framework, platform, network stack, Over the Air updates (OTA), protocols, Set-up, drivers, Operating Systems/ bare metal and low-level wireless controllers. You are expected to have strong working knowledge of Linux and RTOS. Horizontally you will be given to opportunity to work and own firmware and platform across all Ring device categories. You will work closely with the Engineering leaders from cross functional teams, product management, hardware, Technical Program managers, operations, application, firmware, platform, and quality assurance teams. You must be responsive, flexible, and able to succeed within an open and collaborative peer environment. The Ring Platform team is responsible for the complete device side software for Ring devices. This includes delivery and maintenance of an evolving feature rich, high-performance, low-power, stable platform. Key job responsibilities Work with cross functional teams to provide technical solutions for desired user experiences. Implement high-quality Core Platform, framework, network stack and application features. Knowledge of professional software engineering practices & best practices for the full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations Implement the right metrics, debug tools and integrate with backend solutions to continuously measure and improve on our solutions. Implement power management features, resolve thermal issues & performance bottlenecks in resource (CPU, Memory) constrained Platforms and devices. Work with teams to improve and tailor existing firmware, drivers, stack, and applications to our needs. Improve memory footprint, optimize drive, stack and application code. Work with the hardware team to ensure correct exercising of hardware and RF architecture. Support compliance and certification activities. A day in the life Your work is very hands-on and multi-disciplinary. You will be defining and building firmware, platform, and network solutions and work closely with vendors, engineers, and product teams. You write documents, carry out experiments, demonstrate proof-of-concepts, build prototypes, and ship sophisticated systems. About the team Ring offers smart security solutions that are dependable and reliable to make neighborhoods safer. You will be part of a fast-paced team that is passionate about delivering innovative solutions to complex problems. - 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience - 5+ years of non-internship professional software development experience - Experience programming with at least one software programming language - Adept in Non-Functional Requirements (NFRs) - performance, Security, Reliability, Scalability and Automation of new and existing systems experience. - Proficient in Real Time Embedded System domain and 16/32-bit Micro-controllers/ SoCs based firmware/ Software design & development. - Working knowledge with RTOS (FreeRTOS and Embedded Linux) with understanding on kernel internals and multi-threaded programming. - Proven track record of troubleshooting issues using debuggers/ emulators/ loggers , identifying the root cause and resolving development/ Quality Assurance/ Trials and Field issues. - Experience in day-2-day usage of build & cross compilation tools - SCM with Pre-CI/CI/CD pipelines. - Experience as a mentor, tech lead or leading an engineering team.

WIRELESS EDUCATION & ADDITIONAL CERTIFICATIONS Typically requires BSc Computer Science or equivalent plus 5-8 years of relevant work experience. Advanced degree strongly preferred. Cisco certifications (CCNP, CCIE etc.) would be highly desirable. REQUIRED SKILLS [Must have and should meet all the below standards for qualifying to this role] Expert knowledge in Wireless - RF design & wireless network design for large enterprise with branches. Troubleshooting WLAN issues. Experience in leading large WLAN migration projects & complex PDI & optimization engagements Technologies - WiFi6, Hands-on Product Knowledge - Cisco Wi-Fi 6 access points, Catalyst 9800 wireless controllers and DNAC DESIRED SKILLS [Good to have or value add to this role] Python and API Ekahau Pro/ sidekick usage ISE deployment and configuration experience

Position: Application Engineer, Connectivity Job Description: What You ll Be Doing: Provide advanced engineering design service and support to regional engineering team for RF, wireless, communication connectivity components for product development. Develop and maintain an in-depth understanding of wireless technologies (e.g., Wi-Fi, Bluetooth, Zigbee, LoRa, cellular) and wired technologies (e.g., Ethernet, fiber optics, USB). Conduct RF simulations and model system-level performance to ensure designs meet specifications for frequency, gain, noise figure, and other critical parameters. Implement advanced testing methodologies to evaluate RF performance metrics such as signal integrity, power efficiency, and interference management. Stay current with emerging RF technologies, standards, and industry trends, providing innovative solutions and recommendations for product development. Support the development and validation of reference designs to meet customer requirement. Ensure all designs comply with industry standards and customer specifications. Attend technical and sales training in efforts to stay abreast of current technology. Ensure accurate documentation of engineering designs and solutions for future reference. What We Are Looking For: Bachelor s Degree or higher in Electronics/Electrical Engineering, Computer Science, or related engineering field. Minimum of 7 years of experience in electronics/semiconductor, RF/wireless, and communication product design. Strong knowledge of wireless communication protocols (e.g., Wi-Fi, Bluetooth, Zigbee, LoRa, cellular) and wired connectivity (e.g., Ethernet, fiber optics, CAN). Familiarity with relevant industry standards (e.g., IEEE 802.11, IEEE 802.3, Bluetooth SIG, 3GPP). Proficiency in using RF design and simulation tools like ADS, HFSS, or CST Microwave Studio, and experience with lab equipment such as Network Analyzers and Spectrum Analyzers. Experience in troubleshooting and optimizing RF circuits and systems, with a solid understanding of signal processing and electromagnetic theory. Familiarity with compliance and regulatory standards (e.g., FCC, ETSI) and a proven track record in meeting these requirements. Excellent problem-solving skills and a proactive approach to technical challenges. Strong communication and teamwork skills to work effectively with customers and internal teams. Passion for innovation and commitment to delivering high-quality engineering solutions. What s In It For You: Training and professional development Performance coaching Work with fun team in a supportive environment. Work at a strong and growing company Community involvement opportunities About Arrow Arrow Electronics, Inc. (NYSE: ARW), an award-winning Fortune 133 and one of Fortune Magazine s Most Admired Companies. Arrow guides innovation forward for over 220,000 leading technology manufacturers and service providers. With 2023 sales of USD $33.11 billion, Arrow develops technology solutions that improve business and daily life. Our broad portfolio that spans the entire technology landscape helps customers create, make, and manage forward-thinking products that make the benefits of technology accessible to as many people as possible. Learn more at www.arrow.com Our strategic direction of guiding innovation forward is expressed as Five Years Out, a way of thinking about the tangible future to bridge the gap between whats possible and the practical technologies to make it happen. Learn more at https://www.fiveyearsout.com/ For more job opportunities, please visit https://careers.arrow.com/us/en Location: IN-KA-Bangalore, India Time Type: Full time Job Category: Engineering and Technology

Evaluate customer needs based on applications requirements, current capacity, and growth trends Backup tools (Commvault Simpana 11 SP14,HPDP 10.1,Netbackup 8.0,Backup Exec versions 10/14.2/15/20/20.5 Restore, recover the data from the backup system as required SAP for Oracle,MSSQL,Exchange database, AS filesytem, Oracle Database Manage and maintain the backup systems Ensure backups run to schedule retention in met Verify all full backup jobs Maintain an audit Trail of backups restores. Provide reports on job success/failure Perform file restores as required Regularly validate backup jobs Backup performance and configuration ,version upgrade tasks(Commvault install iData agents)Backup Exec,Netbackup,HPDP Tape management Perform TapeLibray firmware upgrade activities Analyse complex hardware and software issues associated with backup-related technologies, including Backup Exec NetBackup, Commvault, HPDP and Enterprise Vault Performing backup Exec upgrade activities through Change management process Participate in capacity planning Tape/Disk and performance discussions Provide technical services for customers in a backup environments Provide resolution IM/RF as per SLA perform / follow backup related activity as per SOP .LUN Management, Host management on HDS VSP, VSP G200, HUS 130,EMC VNX, VNXe 3200 NetApp FAS 3140 .Implemented Virtualization of External storage to HDS VSP storage .Storage configuration of HNAS .File system CIFS share creation in HNAS .Managing of volumes CIFS shares in NetApp .Monitoring and troubleshooting on EMC VNX5300,VNXe 3200, Netapp, HDS VSP storage, HNAS3080, HUS 130 and Brocade switches300 6520

Driving Infinite Possibilities Within A Diversified, Global Organization Job Description IoT Cyber Security Engineer Must Have Skills 3 to 6 years of experience in Hardware / Systems / Network / Application / Cloud penetration testing Has a Bachelor s Engineering degree or equivalent, preferably in Computer Science Identify vulnerabilities in embedded systems and connected objects Identify security flaws in the electronic layer using PCB Layouts / Schematics Expertise in embedded software and communication protocols like USB, UART/USART, I2C, SPI, CAN, Bluetooth/BLE, Zigbee, RS232, RS485, JTAG, LoRa, RFID Encryption tools and techniques for securing mobile and virtual machines. Good understanding of security development lifecycle processes Knowledge of OWASP Top 10 and SANS Top 25 and how to effectively remediate vulnerabilities associated with each Run & Analyze the penetration test (Manual & Automated) and pinpoint the security issues and suggest countermeasures for security improvements Demonstrated manual product penetration testing experience; for example, simulate a SQL injection attack without tools, simulate XSS attack, X-Path Injection, etc. Good knowledge and hands-on experience using various penetration testing tools like Nessus, Web Inspect, Nmap (Slow Scans, Service detection, OS detection, Nmap Scripts), Burp Suite, AppScan, ZAP, Frida, Binary Ninja, Hak5, RF Hacking, Kali Linux Communicate results and security risks to Product Owners Good communication & negotiation skills Highly motivated with willingness to take ownership/responsibility for their work and ability to work both independently and in a team-oriented environment. Highly customer-focused Adept at selecting and utilizing appropriate technologies to solve complex problems effectively Ability to work with geographically distributed, cross-functional teams Good to have skills Certification such as CEH, OSCP, OSCE, CCSP, CCSK will be highly desirable. Familiar with tools such as Ubertooth, Attify Badge, JTAGulator, Bus Pirate, etc. Ability to learn emerging security trends and tools Domain knowledge of ICS and related security trends JOB ID: HRD259231 Category: Engineering Location: HW Camp II,Bldgs 9A&9B,Plot C2,RMZ Ecoworld,Varturhobli,Sarjapur Marathahalli Outer Ring Road , Bangalore , KARNATAKA , 560103 , India Exempt

Project Role : Application Designer Project Role Description : Assist in defining requirements and designing applications to meet business process and application requirements. Must have skills : SAP EWM Good to have skills : NA Minimum 7.5 year(s) of experience is required Educational Qualification : Minimum 15 years of fulltime education Key responsibilities :A:Experience with SAP EWM implementation & support projects.B: Expertise in process design, functional specifications & configuration of business process scenariosC:Experience with Incident, problem, and change management processes. D:Business process knowledge of warehouse material handling and integration to ERP systems.Technical Responsibilities :A:Good functional knowledge & experience across warehouse functions covering inbound, outbound & internal processes.B:Hands on experience in setting up warehouse structure, POSC, LOSC, WOCR, Wave mgmt., RF framework, MFS, PPF etc.C:Knowledge & experience with integration between EWM ASRS & RF Devices. D:Should have good understanding of ECC processes:OTC, PTP & QM.E:9 to 11 year of experience required in SAP Extended Warehouse Management Professional Attributes:A:Should have good communication and problem-solving skills. Educational Qualification:A:Minimum 15 years of full-time education Qualification Minimum 15 years of fulltime education

Your tasks Develop, implement and execute test plans and test cases to assess WLAN measurement functionality, performance and reliability Conduct manual and automated tests to validate WLAN measurement features Perform regression testing to ensure that new changes or updates do not adversely affect legacy functionality Identify, reproduce, isolate, debug and document defects or issues found during testing, and work closely with development teams to resolve them Collaborate with cross-functional teams to understand product requirements and define acceptance test cases according to the defined uses cases, provide input on design and implementation considerations Utilize testing tools and equipment to simulate real-world network scenarios and assess performance under different conditions Analyze test results and provide detailed reports to stakeholders, including recommendations for optimization and improvement Stay updated on industry trends, best practices, and emerging technologies related to WLAN testing and network management Propose and implement improvements and changes related to your area of responsibility Your Qualifications Bachelor's degree in computer science, Information Technology, Electrical Engineering, or a related field Proven experience in testing, preferably related to WLAN Strong understanding of wireless networking technologies, including WLAN (WiFi) standards (802 11a/b/g/n/ac/ax/be), RF fundamentals, and WLAN measurements Familiarity with WLAN measurement test equipment such as signal generators, protocol analyzers, spectrum analyzers Proven Experience with Pytest and SCPI Excellent analytical and problem-solving skills, with the ability to troubleshoot complex technical issues Effective communication skills, with the ability to collaborate with geographically dispersed, cross-functional teams and communicate technical concepts to non-technical stakeholders Detail-oriented approach with a commitment to produce high-quality work and deliver accurate test results Openness and drive for innovation Interested We are looking forward to receiving your application! Ideally, you should apply online with the reference number If you have any questions, please feel free to contact your recruiting contact via LinkedIn or XING Equal opportunities are important to us We are looking forward to receiving your application regardless of gender, nationality, ethnic and social origin, religion, ideology, disability, age as well as sexual orientation and identity reference number Recruiting Contact Rohde & Schwarz is a global technology company with approximately 14,000 employees and three divisions Test & Measurement, Technology Systems and Networks & Cybersecurity For 90 years, the company has been developing cutting-edge technology, pushing the boundaries of what is technically possible and enabling customers from various sectors such as business, government and public authorities to maintain their technological sovereignty Rohde & Schwarz is a leading supplier of solutions in the fields of Test and Measurement, Broadcasting, Radio monitoring and Radiolocation as well as Mission-critical Radio communications For more than 80 years, company has been developing, producing and marketing a wide range of electronic products Headquarters in Munich with subsidiaries and representatives active in over 70 countries around the world, Rohde & Schwarz has achieved its global presence greatly In India the company is present as Rohde & Schwarz India Pvt Ltd (RSINDIA) which is 100% owned subsidiary of Rohde & Schwarz GmbH KG & Co, Germany, whose head office is located in New Delhi and branch offices in Bangalore, Hyderabad, Mumbai and Field presence at Ahmedabad, Chennai and Pune With more than 10 channel partners situated at key industrial locations we serve across the country Our emphasis is to provide outstanding sales, service and support to our customers The company has invested sustainably to increase the local support capability as well as to provide a fully automated Calibration facility for most of the products sold Rohde & Schwarz India has ISO 9001 2015 certified Quality Management Systems and ISO 17025 NABL Accreditation The company continuously invests in training its service and sales personnel regularly to maintain a high level of technical competence in preand post-sales support and outstanding quality in services viz Repairs, Calibration, Product support & Project management Rohde & Schwarz India is a financially stable company rated by CRSIL as SME 1 for more than 5 years now This rating is the highest in its category Rohde & Schwarz India is committed to 100% customer satisfaction through innovative product offerings and outstanding support and services Our comprehensive and continuously growing range of services are designed to provide customers with the highest level of quality and value throughout the life cycle of our products

Perform model extractions for DC and RF frequencies for devices like Diodes, Varactors, Resistors etc. and develop a compact model based on device physics for SOI, Bulk and GaN technologies. Responsible for the definition of test structures and layouts for the necessary devices and submit tests like DC-CV, DC-IV, S-parameters, Noise, Mismatch etc. for electrical characterization. Work closely with team members and interact with global team to understand and solve any discrepancies in data or model. Your Job : Device model extraction for DC and RF frequencies (Diode, Varactor, Resistors etc.). Definition of test structures and layout as and when necessary. Knowledge of semiconductor physics and application in understanding device data (Diode, Varactor, Resistors etc.). Knowledge of S-parameters and their application in extracting device models. Interaction with team to resolve discrepancies in the data, model etc. RF knowledge of Back-end of line devices like Inductors, Capacitors, Transmission Lines. Able to understand and debug EM simulations. Characterize and Model various Back end of line devices. Other Responsibilities: Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety Security requirements, and programs. Required Qualifications : M.Tech/M.S with focus on semiconductor devices Exposure to RF a plus (S-parameters etc.) Freshers or MS/M.Tech with 0 - 2 yrs of experience Fluency in English Language - written verbal Strong interpersonal skills and ability to work effectively with different cultures Preferred Qualifications: M.Tech/M.S in Electrical Engineering and specialized in Microelectronics or semiconductor devices Ability to work effectively with all levels of Device/Fab organizations Exposure to RF a plus (S-parameters etc.)

Review of complete Final Design Engineering Documents (FDED), IBS site design drawings/calculations (architectural, civil, electrical (AC Power/DC Power), Electromechanical (HVAC/Fire Protection system) prior to submit for approval customer s design team. Preparation of site-specific detailed scope of works BOQ for Civil, Electrical Electro-Mechanical works for FDED approval. Resubmit FDED till it gets final approval from customer to safeguards BoQ claims. Responsible for obtaining approvals of Civil Final Detailed Engineering Design (CFDED). To ensure that Civil Final Detailed Engineering Design (CFDED) are prepared, submitted, and approved in accordance with project specifications and customer s processes (SLA s) are followed. and to meet project targets for obtaining approvals of CFDED. Co-ordinate with the Design Manager (Team Leader) for all approved and rejected FDED other design documents submittals. Well Knowledge in American standard code of design practice. Technical follow ups with all contractors Design reviews, discussions, CFDED s quality checks scopes confirmations/to work with customer team along with project team for NFTS Model creations/SoW creations /NE Tool follow ups-design as built /Documentation/SQL -FIS uploads for CPAT s/design reviews with customer team. Understanding of IBS Sites RF designs /solutions/scenarios to provide solution for IBS sites CME(Civil / Electrical / Electromechanical) Parts solutions. Making Site Joint Visits/Site Surveys with Customer/Contractors/Project Teams/Building Management Teams for Technical discussions, to provide Technical Solutions. Qualifications and Experience Bachelors in electrical engineering. Minimum 5 years of experience as Design Review Engineer within Saudi Arabia in the field of Mobile Telecommunications Network Rollout. Having experience in (IBS) Indoor Solution Design Infrastructure Projects. Having hands on experience in AutoCAD/MS Offices Products Tools for projects.

Job Job Title SAP EWM Architect Responsibilities Candidate is expected to be a senior Functional Architect for SAP Programs and should possess broad functional knowledge in Warehouse Management domain and in-depth technical knowledge in the SAP EWM module. Also, proven expertise in Designing, configuring and supporting SAP landscapes. Technical and Professional Requirements: Overall 15+ years of experience in SAP and 8 + years' experience in SAP EWM. Subject matter expert in SAP Extended Warehouse Management and have Support & implementation experience of projects, experience in strategy and consulting for EWM. Should have configured the system and written functional specifications for complex developments. Must possess in-depth functional and technical knowledge of SAP EWM and have good understanding of the integration of EWM with other modules. Must have worked in Voice pick / RF related developments and expertise in Outbound and Inbound related processes. Develop Functional recommendations including Process changes. Share perspectives about best practices, common technical issues & approaches. Will support defects and enhancements through Incident, change and problem management. Full life cycle implementation cycle with Blue printing, fit gap analysis, configurations, data migrations, cutovers and go live experience. Preferred Skills: Technology->SAP Functional->SAP SCM EWM Technology->SAP Functional->S4 HANA - Logistics Additional Responsibilities: Proactive approach to problem solving. Need to come up with innovative ideas which will provide value to the customer. Excellent team management skill High analytical skills A high degree of initiative and flexibility High customer orientation High quality awareness Educational Requirements Master of Business Administration,Bachelor of Engineering,Bachelor Of Technology Service Line Enterprise Package Application Services * Location of posting is subject to business requirements

Essential Duties and Responsibilities: Candidate would be an integral part of SAP Application Support team and would be directly responsible for all SAP EWM functional project assignments. Some of the specific task expectations are as given below: - Perform related duties as assigned by supervisor Maintain compliance with all company policies and procedures Work Experience: S/4 HANA Implementation Exp is required Must have experience on SAP Rollout projects, especially on EWM Processes flow Good exposure on all standard EWM Process like Inbound, Outbound, Internal and Physical Inventory Ability to understand and map in system even the complex warehouse processes Must have good exposure on S/4 HANA and the EWM related Fiori apps Must have good exposure on Handling Units Must have good exposure on POSC, LOSC, WOCR and PPF Must have good exposure on integration with QM and PP process like putaway externally procured material in warehouse with quality and Picking material from Production Supply Area (PSA) Must have good Knowledge on EWM related Master data Must have good Knowledge on Kanban cycle with one step and two step process Must have good Knowledge on Milk run Process Must have good knowledge on Replenishment Process Must have good knowledge on repacking process like single and multi level Handling unit Ability to understand the business requirement and map these into SAP EWM processes and Identify gaps and solution to these gaps. Ability to work independently and deliver the task in desired time frame Good to have ABAP technical knowledge Ability to design FS, End User Training Document Must have good exposure on RF scanner interface (Mobisys Application) and other interfaces like QRFC and Idocs

This job is in the R&D group of Keysight High Frequency Measurement Center of Excellence (HFM COE) HFM COE is responsible for developing world-leading network analyzers, signal analyzers, signal generators and transceivers that are utilized to design and test next-generation products in cellular communications, satellite systems, automotive collision avoidance, and other high frequency wireless systems We are seeking an experienced Software Engineer to serve as a technical leader, responsible for architecting, designing, and developing complex large-scale software for Signal Analyzers The ideal candidate will possess extensive full stack knowledge spanning from lower-level hardware/firmware integration, through measurement algorithm design, to customer-facing application implementation, and be able to leverage that knowledge to deliver software solutions to our customers This position is part of an Agile team and will participate in the full software development lifecycle As a technical leader, the successful candidate must be able to collaborate with other functional teams to translate broad concepts and business strategies into structured solutions, deliver complex and high impact designs, address performance and optimization concerns, and drive the delivery of cutting-edge technologies that shape the future with passion and motivation Responsibilities Collaborate with cross-functional teams to define and prioritize requirements Review, analyze and optimize architecture of the product with innovative solutions Develop and improve GUI & RUI usability continuously Define and develop interfaces between firmware (hardware control) and software Follow coding rules and conduct code reviews with constructive feedback Leverage RF measurement science knowledge in software designs Provide leadership and mentoring to other team members Qualifications BS, MS, or PhD in Computer Science, Computer Engineering, or other related engineering discipline with software emphasis 6+ years software engineering experience, with consistent success designing and delivering solutions Strong knowledge and experience in object oriented (OO) design and programming Proven experience in building , testing, and debugging software Proficiency in C#, C++, .NET, WPF, MVVM Familiarity with Agile development and tools such as TFS, GIT, Jenkins, Jira, etc Demonstrated ability to work with a team and collaborate effectively with across global teams of engineers achieve objectives Understand business and customer needs and apply knowledge to create innovative solutions Good organizational skills and ability to work in a fast-paced, results driven environment Proven ability to deliver complex and challenging assignments Excellent written and verbal communications skills Demonstrated analytical and problem-solving skills with a passion for learning and professional growth Preferred Qualifications: Strong RF Measurement Science knowledge and telecommunication specifications Experience with Measurement Instruments (signal analyzers, network analyzers, signal generators, Oscilloscopes, etc) Collaborate with cross-functional teams to define and prioritize requirements Review, analyze and optimize architecture of the product with innovative solutions Develop and improve GUI & RUI usability continuously Define and develop interfaces between firmware (hardware control) and software Follow coding rules and conduct code reviews with constructive feedback Leverage RF measurement science knowledge in software designs Provide leadership and mentoring to other team members

Develop and debug characterization and production test programs for RFSoC ICs Wireless connectivity devices. Well Experienced in Multi-Site ATE hardware design in Ultra-Flex and Ultra Flex plus tester platform for Radio devices. Requires a solid understanding of process/design/test integration, including thorough circuit, ATE, and Design-for-Test (DFT) knowledge as well as Design of Experiments (DOE) and Statistical Process Control(SPC). Resolve customer application problems and manage customer returns and RMA process and drive timely closure of customer issues. Create multiple new design test programs and make significant manufacturing improvements in existing products. Be responsible for completing the product performance and data sheet compliance matrix through all rounds of design optimization and customer product sampling. Provide test engineering expertise and troubleshooting support to both internal and external custo You are best equipped for this task if you have: 10+ years experience in ATE Test solution development. BE/ME Electronics/Electrical Engineering, Computer Science. Experience with developing Multi-site Teradyne Ultra Flex , Ultra FlexPlus and/or Advantest 93K test solutions desired. Experience in Digital, Analog and RF product test development. Experience in VB, C, C++, Java & automation scripting ( PERL, PYTHON , or MATLAB). Knowledge of Teradyne IGXL version 9 and 10+ preferred. Experience with electronic bench-test equipment - oscilloscopes , logic analyzers, pulse and signal generators, power supplies, DC source/measure. Excellent project management skills with demonstrated ability to identify manufacturing improvements, manage change, and implement solutions. The ability to organize and present project information and goals in a concise, clear manner Comfortable working in a dynamic team environment. Demonstrated high level of technical leadership, mentoring, and strong communication skill set

We are seeking a dynamic and experienced R&D Project Manager to lead our innovative team in developing cutting-edge software for Arbitary waveform generators As the R&D Project Manager, you will play a pivotal role in overseeing and coordinating all aspects of the Arbitary waveform generator Software baseline, ensuring timely and successful completion Your responsibilities will include defining project scopes, objectives, and timelines, as well as collaborating with cross-functional teams to drive innovation and meet project goals The ideal candidate will possess a deep understanding of DSP/SI/C++/C#, strong project management skills, and a proven track record of successfully delivering complex R&D projects If you are passionate about pushing the boundaries of technology and thrive in a collaborative and fast-paced environment, we invite you to join our team and contribute to the advancement of Arbitary waveform generators The candidate will work closely with teams in Germany and US and coordinate with partners who provide R&D resources necessary for executing the project Education: Electronics/Electrical/Software Engineering or closely related field, with experience in managing R&D projects closely related field, with experience in managing R&D projects Experience: Proven track record in project management from concept phase to ship release Proven organisation leadership, program, and people management skills to drive change and influence teams and partners towards higher levels of execution, return, and productivity Solid experience managing a high-performance engineering team in development programs, including: Experience in resource planning, task assignment, and completion tracking Experience with managing and reporting project budgets and schedules Experience in communicating program status and progress to customer/partner teams and instilling customer confidence Ability to multi-task and to formally track details, issues, and risks over multiple projects Proven ability to lead and motivate professionals to meet challenging objectives and timelines, including active performance management when required Candidate should possess a solid understanding of C++/C#/WPF programming languages Strong background in RF & digital X-fctl team management (planning, product management, manufacturing, ) and PLC knowledge Experience working with contractors and vendors is a definite plus Job Description We are seeking a dynamic and experienced R&D Project Manager to lead our innovative team in developing cutting-edge software for Arbitary waveform generators As the R&D Project Manager, you will play a pivotal role in overseeing and coordinating all aspects of the Arbitary waveform generator Software baseline, ensuring timely and successful completion Your responsibilities will include defining project scopes, objectives, and timelines, as well as collaborating with cross-functional teams to drive innovation and meet project goals The ideal candidate will possess a deep understanding of DSP/SI/C++/C#, strong project management skills, and a proven track record of successfully delivering complex R&D projects If you are passionate about pushing the boundaries of technology and thrive in a collaborative and fast-paced environment, we invite you to join our team and contribute to the advancement of Arbitary waveform generators The candidate will work closely with teams in Germany and US and coordinate with partners who provide R&D resources necessary for executing the project

In this role, you will be part of an wifi radio validation(Wi-Fi 802.11 a/b/g/n/ac/ax) & test team and perform lab characterization and validation of WLAN/BT/combo SoC for IOT products. Bench test, debug, and characterization of module level and RF SoC IP including transmitters, receivers, PLL, power amplifiers, ADC/DAC, crystal oscillators, and Low noise amplifiers for Wireless LAN 802.11 a/b/g/n/ac/ax solutions RF module level characterization measuring NF, Gain, IIP2, IIP3, P1dB, S11 and other module parameters RF system characterization measuring EVM, phase noise, sensitivity, and other radio parameters. Design of external matching networks to optimize Tx/Rx radio performance. Set-up and maintenance of lab test environment. Development and execution of scripts Generation of RF design/verification/test report. Interface with RF systems and integration teams on RF board layout, test interface methodology and programming sequence, and RF calibration programming.= Interface with RF systems and integration teams on RF board layout, test interface methodology and programming sequence, and RF calibration programming. You are best equipped for this task if you have: Typically requires a minimum of 12+ years experience in RF test development , debug, and reporting. Strong RF background and familiarity with RF systems fundamentals. Working knowledge and handling of test equipment (network analyzer, spectrum analyzer, vector signal analyzer, vector signal generator, Oscilloscope etc.). Expertise in test and script development ( Python, Perl, TCL etc). Experience WiFi, LTE , B T and Knowledge of MATLAB if pulse point Expertise in RF PCB board design, debug, and development. Working knowledge of RF, PLL, and general wireless systems measurements Good written and verbal communication skills.

Role & responsibilities Perform IC mask layout design and physical verification for custom Analog/RF mixed signal, IO & ESD designs at the Block/Module level. Execute and oversee layout activities, including LVS/DRC/antenna checks, for complex mixedsignal integrated circuits. Collaborate closely with circuit designers and CAD engineers to create and optimize custom Analog mixed-signal blocks layout. Ensure adherence to established companywide layout design & CAD methodologies and process flows. Lead and manage a team of 4-5 professionals, providing guidance and support as necessary, and contribute individually when required. Identify and resolve issues related to failure-prone circuit and layout structures, working in tandem with circuit designers to find optimal solutions. The candidate should have worked on higher nodes 28nm/40nm & above We DO NOT need candidates who have worked on lower nodes like 3nm/4nm/8nm etc

Hiring for US based MNC, pls Apply if following Job Description suits your aspirations. Electronics Engineer will be responsible for designs, develops, and tests electronic systems and equipment, often involving a combination of hardware and software. They work in various industries, including telecommunications, manufacturing, automotive, aerospace, and consumer electronics. Create detailed electronic designs for circuits, systems, and devices. Develop and test new products, ensuring they meet industry standards and customer requirements. Select and integrate electronic components such as resistors, capacitors, transistors, and microcontrollers. Conduct simulations and analyses of circuits and systems using design software (e.g., MATLAB, CAD tools). Build and test prototypes to ensure functionality and performance. Troubleshoot and repair defective electronic systems and equipment. Conduct experiments and tests to evaluate the functionality, safety, and efficiency of designs. Work closely with other engineers, product managers, and manufacturers to ensure designs are implemented efficiently. Document designs, technical specifications, and test results. Prepare reports and presentations for stakeholders. Ensure designs comply with relevant industry standards, safety regulations, and quality control procedures. Conduct testing and verification to ensure products meet performance requirements. Manage time and resources efficiently to meet project deadlines. Oversee the progress of development projects and report on milestones. Research emerging technologies and trends to implement in future products. Suggest improvements to existing designs and systems.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. Preferred Qualifications: Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 3+ years of Hardware Engineering or related work experience. 2+ years of experience with circuit design (e.g., digital, analog, RF). 2+ years of experience utilizing schematic capture and circuit simulation software. 2+ years of experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, RF tools, etc. Principal Duties and Responsibilities: Applies Hardware knowledge and experience to plan, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems. Integrates features and functionality into hardware designs in line with proposals or roadmaps. Conducts simulations and analyses of designs as well as implements designs with the best power, performance, and area. Collaborates with teams (e.g., design, verification, validation, software and systems engineering, architecture development teams, etc.) to implement new requirements and incorporate the latest test solutions in the production program to improve the yield, test time, and quality. Evaluates, characterizes, and develops the manufacturing solutions for leading edge products in processes and bring-up product to meet customer expectations and schedules. Evaluates reliability of materials, properties, and techniques and brings innovation, automation, and optimization to maximize productivity. Assists in the assessment of complex design features to identify potential flaws, compatibility issues, and/or compliance issues. Writes detailed technical documentation for Hardware projects. Level of Responsibility: Works independently with minimal supervision. Decision-making may affect work beyond immediate work group. Requires verbal and written communication skills to convey information. May require basic negotiation, influence, tact, etc. Tasks require multiple steps which can be performed in various orders; some planning, problem-solving, and prioritization must occur to complete the tasks effectively. Applicants : Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies : Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.