2235 Quality Engineer Jobs - Page 6

Looking for a young individual who has QC knowledge for casting inspection and all quality related work (PDIR,Excel, as well as ISO documentation. Work place is in Pirangut Monthly salary will be between Rs20000/- to Rs25000/- Casting knowledge is mandatory. Minimum one year experience is required. Please do not apply if above points dont match your profile Hiring immediately! Job Type: Full-time Pay: ₹20,000.00 - ₹25,000.00 per month Ability to commute/relocate: Pune, Maharashtra: Reliably commute or planning to relocate before starting work (Required) Experience: Quality Assurance: 1 year (Required) total work: 1 year (Required) Shift availability: Day Shift (Required) Work Location: In person

Hello, I have vacancy right now for Quality Engineer in Automobile Industry. Job Location- Kasna Greater Noida Salary-Around 25k Experience-1 to 3 Years Qualification-Diploma/B Tech in Mechanical Interview Type-Only Face 2 Face Interview Date-18 Aug and 19 Aug. If, You are interested and You can attend the face to face interview. Then share me updated resume on my WhatsApp-+91-8766318322. Contact me only serious person. Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹26,000.00 per month Benefits: Health insurance Provident Fund Work Location: In person

This job is with Johnson Matthey, an inclusive employer and a member of myGwork – the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. Follows established procedures and guidelines to perform routine procedures to test the quality of the organisation's materials, products, and processes. Contributes to the planning and definition of quality standards, recommending modifications in product or process. To manage the shift quality operation and system implementation throughout the shift. Timely testing & release of RM & FG. Timely completion of run-folders Raising incident report in case of product or process non-conformance Authority- Authority to stop the PC / MPC line / Wash coat processing if process parameters are not in specifications Line Setup and changeover process approval within the shift. Incoming, In process and Finish good material release within the shift in SAP. Creating inspection setup in SAP for new material, Rejection booking in Tracksys Creating visual specification document and distribution within the line. Shift level audits and process verification, Scada recipe verifications. Coordination for testing of the product within the shift Run folder completion and Testing report preparation within the shift. Analysis of rejection / Special incident which caused or potential to cause the quality issue. Handling of inspection instrument s like 3DX-Ray, Stamp Camera and Catpro within the shift Reaction towards any deviation in the process/product and its communication Resolving the quality related issues generated in the shift. PERSON SPECIFICATION Qualifications/ Knowledge/ Experience (TECHNICAL/ PROFESSIONAL KNOWLEDGE & SKILLS COMPETENCY) B.Tech - Mechanical/Chemical. 2 to 4 year of experience in Automotive/Manufacturing (Desirable) Essential Knowledge of Quality improvement tools. Knowledge of MS-office Desirable Knowledge in SAP (Quality module). Knowledge in handling system audits. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise. Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice. By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.

Follows established procedures and guidelines to perform routine procedures to test the quality of the organisation’s materials, products, and processes. Contributes to the planning and definition of quality standards, recommending modifications in product or process. To manage the shift quality operation and system implementation throughout the shift. Timely testing & release of RM & FG. Timely completion of run-folders Raising incident report in case of product or process non-conformance Authority-: Authority to stop the PC / MPC line / Wash coat processing if process parameters are not in specifications Line Setup and changeover process approval within the shift. Incoming, In process and Finish good material release within the shift in SAP. Creating inspection setup in SAP for new material, Rejection booking in Tracksys Creating visual specification document and distribution within the line. Shift level audits and process verification, Scada recipe verifications. Coordination for testing of the product within the shift Run folder completion and Testing report preparation within the shift. Analysis of rejection / Special incident which caused or potential to cause the quality issue. Handling of inspection instrument s like 3DX-Ray, Stamp Camera and Catpro within the shift Reaction towards any deviation in the process/product and its communication Resolving the quality related issues generated in the shift. PERSON SPECIFICATION QUALIFICATIONS/ KNOWLEDGE/ EXPERIENCE (TECHNICAL/ PROFESSIONAL KNOWLEDGE & SKILLS COMPETENCY) B.Tech – Mechanical/Chemical. 2 to 4 year of experience in Automotive/Manufacturing (Desirable) Essential Knowledge of Quality improvement tools. Knowledge of MS-office Desirable Knowledge in SAP (Quality module). Knowledge in handling system audits. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise. Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.

Job Title: Junior Quality Engineer Company: Safety Projects Pvt. Ltd. Location: Umargam Department: Quality Experience Required: 1–3 years in metal fabrication or manufacturing with exposure to quality processes and ISO standards About Us – Safety Projects Pvt. Ltd. At Safety Projects Pvt. Ltd. , we are safety solution providers committed to delivering premium personal safety products and industrial equipment. With a strong focus on quality, innovation, and reliability, we work to protect people and processes through superior engineering and manufacturing practices. Job Summary We are looking for a motivated and detail-oriented Junior Quality Engineer to join our Quality team. The ideal candidate will support the implementation and monitoring of ISO-compliant quality systems, assist in inspections, audits, and documentation, and help ensure consistent quality across our fabrication processes. Key Responsibilities Assist in implementing and maintaining ISO 9001:2015 quality management systems Conduct in-process and final inspections of fabricated components and assemblies Support internal audits and prepare documentation for ISO and customer requirements Help investigate non-conformities and support root cause analysis and corrective actions Maintain records of inspection, calibration, and quality reports Work closely with senior engineers and production staff to ensure compliance with quality standards Assist in training shop floor employees on basic quality practices Monitor and report quality metrics and assist in process improvement initiatives Key Requirements Diploma or Bachelor's degree in Mechanical Engineering, Industrial Engineering, or a related field 1–3 years of experience in a manufacturing or fabrication environment Basic understanding of metal fabrication processes and quality control principles Exposure to ISO 9001 and quality system documentation Good analytical and problem-solving skills Attention to detail and willingness to learn Proficiency in MS Office and basic quality tools (checklists, QC reports, etc.) Effective communication and teamwork skills Preferred Qualifications ISO Internal Auditor training (preferred but not mandatory) Knowledge of basic quality tools (5 Why, Fishbone, etc.) Exposure to 5S, Lean, or Six Sigma principles (added advantage) What We Offer Opportunity to grow in a structured quality system environment Hands-on experience in ISO implementation and fabrication quality processes Training and mentorship from experienced quality professionals Competitive salary and career development opportunities Skills: quality engineer,cad,manufacturing,iso implementation,projects

Follows established procedures and guidelines to perform routine procedures to test the quality of the organisation’s materials, products, and processes. Contributes to the planning and definition of quality standards, recommending modifications in product or process. To manage the shift quality operation and system implementation throughout the shift. Timely testing & release of RM & FG. Timely completion of run-folders Raising incident report in case of product or process non-conformance Authority-: Authority to stop the PC / MPC line / Wash coat processing if process parameters are not in specifications Line Setup and changeover process approval within the shift. Incoming, In process and Finish good material release within the shift in SAP. Creating inspection setup in SAP for new material, Rejection booking in Tracksys Creating visual specification document and distribution within the line. Shift level audits and process verification, Scada recipe verifications. Coordination for testing of the product within the shift Run folder completion and Testing report preparation within the shift. Analysis of rejection / Special incident which caused or potential to cause the quality issue. Handling of inspection instrument s like 3DX-Ray, Stamp Camera and Catpro within the shift Reaction towards any deviation in the process/product and its communication Resolving the quality related issues generated in the shift. PERSON SPECIFICATION Qualifications/ Knowledge/ Experience (TECHNICAL/ PROFESSIONAL KNOWLEDGE & SKILLS COMPETENCY) B.Tech – Mechanical/Chemical. 2 to 4 year of experience in Automotive/Manufacturing (Desirable) Essential Knowledge of Quality improvement tools. Knowledge of MS-office Desirable Knowledge in SAP (Quality module). Knowledge in handling system audits. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise. Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice. By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.

Job Title: Quality Engineer Job Location: IDC, Kalunga , Rourkela, Odisha- 770031 Department: Quality Control Position Type: Full-time, Permanent, Email ID rnjena@tridentfab.com Contact Person Rabi Narayan Jena Experience 2-3 Years Experience in Production Engineering & Quality Assurance Key Responsibilities: · Conduct inspections and tests to ensure product quality (Dimension, Visual Testing) · Knowledge of drawings · Perform NDT techniques (e.g., UT, MT, RT) · Identify and report defects or deviations · Collaborate with production team to ensure quality standards · Reports/ Dossiers Preparation. Ø Qualifications and Education Requirements B. Tech / Diploma in Mechanical Ø Preferred Skills Computer Knowledge (MS Office) Ø Additional Notes Knowledge of NDT techniques (Certification beneficial) Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹25,000.00 per month Benefits: Health insurance Leave encashment Paid time off Provident Fund Work Location: In person

Job Description Company Overview: MaxVolt Energy Industry Limited is a leading manufacturer of lithium-ion battery solutions, catering to both EV and ESS segments. With a commitment to innovation, quality, and sustainability, we are expanding our logistics team to support our growing operations. Job Title: Quality Engineer Function: Quality Assurance Location: Ghaziabad Description: The Quality Engineer is responsible for overseeing the quality processes within the manufacturing unit, ensuring that our products meet the highest standards of excellence. Education: Bachelor of Engineering (BE) Bachelor of Technology (B. Tech) in Electronics & Telecommunication (E&TC) or Electronics, Master of Engineering (ME) Master of Technology (M. Tech) Quality control certification is advantageous. Experience: 3-4 years of post-qualification experience in a manufacturing setup. Work Profile: Li-ion Battery Manufacturing Process, ESD, and Reliability Testing: Oversee the intricate processes involved in manufacturing lithium-ion batteries, ensuring adherence to quality standards and reliability testing protocols. Monitoring and Evaluating Internal Production Processes: Regularly assess and analyse internal production processes to identify areas for improvement and ensure efficiency and effectiveness in operations. Evaluating Final Output of Products: Scrutinise the final output of products meticulously to ascertain their quality and conformity to specified standards, ensuring only high-quality products are delivered to customers. Conducting Electrical Parameter Testing: Perform rigorous electrical parameter testing of final finished battery products according to the control plan, ensuring they meet stringent quality requirements. Preparing and Maintaining Quality Records: Thoroughly document quality-related data, including preparing and maintaining quality records, MIS for system audits, and comprehensive documentation to ensure traceability and compliance. Creating Documents: Develop essential documents such as procedure inspection plans, work instructions, and quality assurance specifications to provide clear guidelines and instructions for quality-related processes. Ensuring Material Availability: Coordinate closely with relevant departments to ensure timely availability of materials as per the dispatch plan, facilitating smooth production operations. Approving Incoming Materials: Conduct thorough inspections of incoming materials, confirming specifications, and conducting visual and measurement tests to ensure compliance, promptly rejecting and returning any unacceptable materials. Analysing Major Scrap :Utilise various quality control tools to analyse major scrap, determining appropriate containment and permanent action in collaboration with the Cross-Functional Team (CFT) to prevent recurrence. Active Participation in 5'S and QUALITY CIRCLE: Actively engage in 5'S and QUALITY CIRCLE initiatives to promote a culture of continuous improvement and quality excellence among team members. Conducting Process Audits: Conduct regular process audits as per the schedule devised by the team, identifying areas of non-conformance and implementing corrective actions to uphold quality standards. Monitoring Customer Complaints: Monitor and address customer complaints promptly, implementing corrective actions and driving continuous improvement efforts to enhance customer satisfaction and loyalty. Identifying Laboratory Equipment Requirements: Identify the need for laboratory equipment and follow up with procurement processes to ensure the availability of necessary resources for quality testing and assurance. Educating the Team: Provide comprehensive training and education to the team on various quality methodologies and tools such as Kaizen, 5S, Poka-yoke, Process audit, and Quality Tools, fostering a culture of continuous learning and improvement. Maxvolt Energy Industries Pvt Ltd is an equal-opportunity employer committed to diversity and inclusion in the workplace. We encourage qualified individuals from all backgrounds to apply. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹25,000.00 per month Benefits: Health insurance Provident Fund Work Location: In person

Company Description Akkor Viyun Private Limited is an independent third-party conformity assessment service company working on behalf of our valued clients. We execute inspections at various suppliers in mechanical, electrical, instrumentation, civil, and infrastructure sectors. As a third-party inspection and recruitment agency, we employ competent inspectors with qualifications such as AWS, CSWIP 3.1/3.2, API 510, API 570, API 653, ASNT Level III, BGAS, NACE, etc. Role Description Pressure part IBR Piping Boiler Experience GA, Isometric, and P&I drawing Qualifications Bachelor's degree in Mechanical or Diploma in Mechanical Min 10 to 12 years of work experience in the same field Oil & Gas _ BOILER experience. Boiler Experience. Erection Pressure part IBR Piping GA, Isometric, and P&I drawing Relevant certifications and qualifications like AWS, CSWIP, API, ASNT, BGAS, and NACE are a plus Bachelor's degree in Engineering or a related field

What You will do: Ensuring compliance to Supplier Control activities identified by organization. Experience of PPAP associated with New Product Launches and Management of Production cycles there after (Manufacturing Transfers). Participate in cross- functional teams in the development of new products or changes related to current products in meeting customer requirements. Applies sound, systematic problem-solving methodologies (5Why, DMAIC, 8D, C&E) in identifying, prioritizing, communicating, and resolving quality issues - NC & CAPA to facilitate root cause analysis and corrective actions of supplier quality issues. Promote the use of continuous improvement methodologies such as Lean, Six Sigma, Poka- Yoke (Error Proofing), Measurement System Analysis (MSA), Statistical process control (SPC) and Process Failure Mode and Effects Analysis (pFMEA) Evaluate Quality data to identify process improvement opportunities within the supply chain. Coordinate Change Management & Control with Suppliers and implement changes at Supplier. Review of process and equipment Validation including Installation Qualification (IQ), Operational Qualification (OQ), Performance Qualification (PQ), Special Process Validations, and Test Method Validations. Prioritizing, reviewing, and delivering First Article Inspections FAIs for sustaining parts and development projects. What You Will Need: Required Qualification: B.Tech (Electronics/Electrical/Mechanical) with 3-5 years of experience in Quality / Engineering / Manufacturing environment. Quality Processes/ Tools - Working knowledge of basic and advanced Quality tools such as; PPAP, Six Sigma, SPC, FMEA, Control Plans, Root Cause Analysis, Poke Yoke, Kaizen, Lean Manufacturing etc. Executes/implements/ improve all supplier quality tools/ Processes. Trains supplier in these tools effectively. Proficient in MS Office Suite (including Word, Excel, Power Point etc). Strong interpersonal skills to work with cross-functional teams (engineering, R&D, manufacturing, regulatory affairs). Preferred Qualification: Understanding of Medical Device Regulatory Compliance (ISO 13485, CFR 820, or comparable standard / regulation) and EU's Medical Device Directive. Excellent communication and influencing skills, with the ability to manage multiple tasks and represent the Quality function across teams Preferred ASQ Certified Quality Engineer (CQE). Commodity Domain Knowledge – Strong Knowledge & understands technology, regulatory requirement related to product, system & services. Stryker is a global leader in medical technologies and, together with its customers, is driven to make healthcare better. The company offers innovative products and services in MedSurg, Neurotechnology, Orthopaedics and Spine that help improve patient and healthcare outcomes. Alongside its customers around the world, Stryker impacts more than 150 million patients annually.

What You’ll Do The Lead, Quality Engineering is the subject matter expert responsible for establishing, sustaining and improving the Quality System for the transition as well as running projects with multiple OEMs and managing quality team. Position is also responsible for ensuring product quality and process compliance through execution of Quality System in manufacturing processes. Role will report directly to the Quality Manager, and work cross-functionally with Operations, Product Engineering, Manufacturing Engineering, Supply Chain, Human Resources, and Finance. The role will be responsible for managing a seamless information flow between supplier, Eaton Internal and customer and taking buy offs for FAI from customer. The role will also be responsible for driving continuous improvement in quality department. Sustain, manage and improve on the Quality System that meets internal, customer, and industry requirements (Typical requirements include Eaton Quality System (EQMS), aerospace OEMs, AS9100, and NADCAP certifications). Validate Quality System effectiveness through ownership, execution of internal & external (3rd Party) Quality System Audits. Leverage EBS tools and best practices to lead a continuous improvement culture, including but not limited to ELSS, EQS, ProLaunch, QBP/QLI, PPAP, change management, and structured problem solving methodologies. Apply quality engineering toolset to ensure manufacturing process capability, including use of FMEA, control plan, MSA, process validation techniques. Utilize data-driven approach to solve problems by obtaining, analyzing, presenting, and taking action on business and process data to improve safety, quality, delivery, and cost metrics in alignment with business objectives. Identify organizational training needs and execute training on subjects relating to customer requirements, quality system auditing, and quality engineering tools. Facilitate dialog with customers and internal Eaton team to understand and resolve potential product quality issues through Root Cause Corrective Action (RCCA). Develop and build Quality team to meet business & organizational goals. Execute other duties as assigned. Qualifications Bachelor's degree in Engineering Minimum 05-10 years of industrial or manufacturing experience; minimum 5 years experience in the quality domain of an Aerospace Business Skills "Demonstrated command of Machining, assembly, testing operations as well as GD&T, Gauging, SPC, APQP, RCCA, inspection techniques and ISO 9001, AS9100, AS9102, NADCAP ,Knowledge on Faro arm quality assurance systems. ASQ Certified Quality Engineer (CQE), Certified Quality Auditor (CQA) preferred. Six Sigma Black belt Certification desirable,laser tracker will be preferred" Strong analytical, project management, and time management skills, team management, communication skills

Key Responsibilities : 1. Quality Assurance and Control : Develop and implement quality standards, procedures, and documentation. Conduct inspections, tests, and audits of raw materials, components, and finished products to ensure compliance with specifications. Identify and address non-conformance issues in manufacturing and production. 2. Process Improvement : Analyze production processes and workflows to identify areas for improvement. Collaborate with cross-functional teams to implement solutions that reduce defects and improve efficiency. Drive continuous improvement initiatives using methodologies like Six Sigma, Lean, or Kaizen. 3. Problem Solving : Investigate root causes of quality issues and recommend corrective and preventive actions (CAPA). Track and monitor the effectiveness of implemented corrective measures. 4. Compliance and Standards : Ensure compliance with industry regulations, standards (e.g., ISO 9001, AS9100, etc.), and customer requirements. Maintain updated knowledge of relevant laws and guidelines. 5. Documentation and Reporting : Prepare detailed quality reports, including metrics and analysis of performance trends. Maintain accurate records of quality assurance activities, audits, and compliance. 6. Customer Focus : Respond to customer inquiries or complaints related to quality issues. Ensure that delivered products meet or exceed customer expectations. Job Type: Full-time Pay: ₹20,000.00 - ₹40,000.00 per month Benefits: Health insurance Leave encashment Provident Fund Education: Bachelor's (Preferred) Experience: total work: 3 years (Preferred) Work Location: In person

We are in search of a dedicated Quality engineer with 2 years of experience to oversee and ensure the highest standards of quality in our sheet metal fabrication manufacturing processes. Responsibilities: Knowldge of inspection methoda and latest equipments . Develop and implement quality control procedures. Conduct inspections and audits to maintain quality standards. Collaborate with production teams to address quality issues. Drive continuous improvement in product quality. Qualifications: 2+ years of experience in quality control or assurance. Proven quality tools skills such as SPC ,Root cause analysis ,PPAP Strong knowledge of quality control methodologies. Excellent problem-solving and analytical abilities. Attention to detail and a commitment to excellence. Metal scape is committed to diversity and equal opportunity employment. If you have the experience and expertise to uphold and enhance our quality standards, please submit your resume and a cover letter detailing your relevant experience to Admamedinc@gmail.com Join in our mission to provide high-quality sheet metal fabricated & powder coated precesion engineering items . Your expertise will help us continue to excel in our industry. Apply today! Job Type: Full-time Pay: From ₹16,000.00 per month Ability to commute/relocate: Dera Bassi, Punjab: Reliably commute or planning to relocate before starting work (Preferred) Education: Bachelor's (Preferred) Experience: Accounting: 1 year (Preferred) A/R Analysis: 1 year (Preferred) total work: 5 years (Preferred) Work Location: In person

We are in search of a dedicated Quality engineer with 2 years of experience to oversee and ensure the highest standards of quality in our sheet metal fabrication manufacturing processes. Responsibilities: Knowldge of inspection methoda and latest equipments . Develop and implement quality control procedures. Conduct inspections and audits to maintain quality standards. Collaborate with production teams to address quality issues. Drive continuous improvement in product quality. Qualifications: 2+ years of experience in quality control or assurance. Proven quality tools skills such as SPC ,Root cause analysis ,PPAP Strong knowledge of quality control methodologies. Excellent problem-solving and analytical abilities. Attention to detail and a commitment to excellence. Metal scape is committed to diversity and equal opportunity employment. If you have the experience and expertise to uphold and enhance our quality standards, please submit your resume and a cover letter detailing your relevant experience to Metalscapes01@gmail.com Join in our mission to provide high-quality sheet metal fabricated & powder coated precesion engineering items . Your expertise will help us continue to excel in our industry. Apply today! Job Type: Full-time Pay: From ₹16,000.00 per month Work Location: In person

Should have experience in Quality Engineer related Machining tools, knowledge all documentations work like CAPA etc. Qualification- Diploma/ B.tech Mechanical. Knowledge related vernier, micrometer, Boreguage and Shipgauge. Knowledge of gear box parts. Knowledge of sound meter, coating thickness meter, Vibration meter. Knowledge of paints. Knowledge of fabrication. Knowledge of Machining parts. Job Types: Full-time, Permanent Pay: ₹9,506.84 - ₹43,092.78 per month Work Location: In person

Job Title: Quality Engineer Job Type: Full-time Work Hours: 12-hour shift Work Location: Alwar, Rajasthan Salary: ₹20,000 – ₹30,000 per month Job Summary: We are seeking a dedicated and detail-oriented Quality Engineer to join our team. The ideal candidate will have hands-on experience with welding inspection, non-destructive testing (NDT), and quality documentation, with strong knowledge of applicable ASME codes and industry standards. Key Responsibilities: · Interpret and apply ASME Section VIII and Section IX codes for pressure vessels and welding procedures. · Perform NDT Level II inspections, specifically in Ultrasonic Testing (UT) and Dye Penetrant Testing (DPT). · Conduct visual inspection of welding and fabrication processes to ensure quality compliance. · Prepare and review Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR). · Organize and conduct welder qualification tests as per applicable standards. · Maintain and prepare quality documentation, reports, and records in accordance with client and regulatory requirements. · Collaborate with production and welding teams to resolve quality issues and implement corrective actions. · Ensure that all quality standards and safety procedures are followed on the shop floor. Required Qualifications & Skills: · Minimum Diploma in Mechanical / Metallurgy / Welding / Related discipline (Preferred) · NDT Level II certification in UT & DPT (Mandatory) · Minimum 3 years of relevant work experience in welding inspection and quality control · Good understanding of welding processes (SMAW, GTAW, GMAW, etc.) · Proficient in preparing and reviewing WPS, PQR, and quality documentation · Strong attention to detail, good communication, and teamwork skills Job Type: Full-time Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Leave encashment Provident Fund Application Question(s): Minimum Diploma in Mechanical / Metallurgy / Welding / Related discipline NDT Level II certification in UT & DPT (Mandatory) Minimum 3 years of relevant work experience in welding inspection and quality control Good understanding of welding processes (SMAW, GTAW, GMAW, etc.) Proficient in preparing and reviewing WPS, PQR, and quality documentation Work Location: In person

Duties/Responsibilities:(In details) To Check PCBA as per standard IPC A 610 latest revision. Interacted with control technicians and production control workers. Responsible for achieving Quality product requirements. Communicated operational issues and changes to supervisor on regular basis. Followed company procedures to maintain work environment in a neat and orderly condition. Provide the Training to apprentice Employees & verification of training effectiveness. Implement Problem-solving tools on the Shop floor (7 QC Tools). Preparing Weekly\Monthly Quality performance Reports to Top Management. Reviewing the Non-conformity with the CFT team to take immediate Corrective Measures. Read Work instruction to prepare for machine setup. Operate AOI (MIRTEC) machine for 1st piece runs. Maintain documents as per ISO 9001, ISO 14001, ISO 13485 & IATF 16949. To verify set process parameters of solder paste printing, speed and pressure of component pick and place, setting up of reflow oven profile by understanding critical characteristics of product. Daily review of AOI/X-ray/other inspection results. Provide training to new employees and verification of training effectiveness, maintain consolidated FQA report and ensure daily MES Entry. Support all training programs by development and implementation of specialized training sessions for all applicable functions. Internal rejection analysis and CAPA. Provide trend analysis of defects occurring at the customer, supplier and internally. Prepare weekly / monthly report and data analysis for improvement actions. RMA analysis, FQA and drive CAPA. Product & Process audits. New process validation. Involvement in customer complaint analysis and CAPA. SPC study and analysis. Support and focus corrective action efforts and utilizing the SPC data and corrective action tracking package and create and implement any meetings, procedures, or team-building concepts as necessary as part of the corrective/preventative effort. MSA Attribute study and record its report. ESD/MSD compliance management. Ensure MSD/ MSL compliance of the material used in production/ process. Quality alerts. Qualification & Experience Minimum Qualification : Diploma or B.E (E&C, EEE) Specializations : EMS Process Quality Required Experience : 2 to 4 Year Other Skills Process Control Plans. First Article Inspection SPI Programing. Statistical Process Control (SPC). AOI Programing. IQC Inspection. Implementing new ideas in the workplace. Problem solving. Motivate Co-Worker. Dedication to work. Communication skills.

Designation: Quality Engineer (Team Leader) Role & Responsibilities : Experience in Incoming Quality/Supplier Quality function. Hands-on experience in Machining shop products commodity. Experience in all type of Variable gauges. Ability to prepare Quality standards; inspection reports; Quality Plan. Good knowledge of inspection, measurement techniques, GD&T. Ability to read Blueprints/Drawings. Implementation of QMS in the shopfloor. Good understanding of ISO 9001 / IATF 16949 requirements. Supplier defect analysis and problem solving (8D). Set clear team goals & Delegate tasks and set deadlines. Monitor team performance and report on metrics. Excellent Team Handling Experience - Min team size of 10 Nos. Good written & verbal communication skills. Proficient in Microsoft Word, Excel & PPT to prepare reports. Other Requirement : Aggressive Attitude Willing to stay near the plant location. Medically fitness mandatory Work Discipline (Safety; Quality); Communication on daily work management to Client SPOC person/ Project Leader

Optum is a global organization that delivers care, aided by technology to help millions of people live healthier lives. The work you do with our team will directly improve health outcomes by connecting people with the care, pharmacy benefits, data and resources they need to feel their best. Here, you will find a culture guided by inclusion, talented peers, comprehensive benefits and career development opportunities. Come make an impact on the communities we serve as you help us advance health optimization on a global scale. Join us to start Caring. Connecting. Growing together. Primary Responsibility Comply with the terms and conditions of the employment contract, company policies and procedures, and any and all directives (such as, but not limited to, transfer and/or re-assignment to different work locations, change in teams and/or work shifts, policies in regards to flexibility of work benefits and/or work environment, alternative work arrangements, and other decisions that may arise due to the changing business environment). The Company may adopt, vary or rescind these policies and directives in its absolute discretion and without any limitation (implied or otherwise) on its ability to do so Required Qualifications 3+ years of experience in a Technical testing role Experience with defining test plans and test cases Experience working closely with a team of software engineers and product owners Some experience in understanding and testing complex enterprise systems architecture Good experience defining lightweight, high value test plans and tests Experience working closely with a team of software engineers and product owners Basic knowledge of scripting technologies such as PowerShell or Python. Knowledge of software testing methodology (Various techniques, frameworks, etc.) Exposure to some aspects/phases of automation including GUI, integration testing, and performance/load testing Exposure to working with Product Owners and SMEs to define user story examples/acceptance criteria and exposure to Gherkin using tools like SpecFlow and Fitnesse Basic MSSQL skills and some understanding of complex XML structures Demonstrated ability to do basic programming in C# or a similar OOP language such as C++, Java Proven passion for quality and a tendency to ensure that the i’s are dotted and the t’s are crossed Proven questioning mind, never accepting anything at face value Proven ‘under the hood’ approach to understanding systems and a need to get down to the nuts and bolts of how things work Proven superb communication skills both written and verbal Preferred Qualifications Degree in a Computing related subject such as Computer Science, Software Engineering etc. Experience in the Healthcare domain Some experience working with geographically distributed team members ISTQB Foundation in Testing with Agile Tester extension or similar qualification Exposure to Microsoft Visual Studio, .NET Framework (v2.0 to v4.5) and C# At UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone-of every race, gender, sexuality, age, location and income-deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes — an enterprise priority reflected in our mission.

Translations.com is seeking a QA Engineer to manage and own the software testing lifecycle for integration frameworks for CMS & e-commerce systems. We are looking for forward-thinking professionals who are more interested in how things could become and who can thrive in an evolving and fast-paced environment. Responsibilities: - Review design specifications to understand the software product's scope, requirements, and functionality. Design and execute performance (load) and Integration testing Conducts testing to ensure a product performs according to user requirements and within established guidelines. Ability to monitor logs and understand the issues Should be able to own complete QA cycle independently Implementing, executing, and capturing results of test plans/test cases Create, modify and maintain test cases needed for all aspects of testing Ability to provide appropriate status reports on a daily basis. Monitor, manage and report bugs using bug tracking tools such as JIRA Provide testing results and reports to the QA Manager and Product Managers Ability to work on multiple products simultaneously as per priority Work closely in collaboration with teams to facilitate rapid deployment testing according to accepted plans and requirements Complete other job duties assigned by your QA manager Should be a good team player Required Skills:- Experience API testing using Postman. Strong analysis and autonomous problem discovery and solving skills Knowledge of functional testing Experience with JIRA Knowledge of databases Ability to work in an Agile lifecycle Strong interpersonal skills and ability to establish and maintain good working relationships Excellent verbal and written communication skills Please send me your resume at pbajpai@transperfect.com if interested.

Job Description:We are looking for a skilled Quality Engineer with experience in the sheet metal industry to join our team. The ideal candidate must possess strong knowledge of quality documentation such as PPAP, have hands-on experience with precision measurement instruments, and demonstrate excellent communication and problem-solving skills. This role will require a proactive approach to root cause analysis and maintaining high customer satisfaction through effective quality management. Key Responsibilities:Ensure adherence to quality standards and manage quality processes including PPAP (Production Part Approval Process) and other related documentation. Work in a sheet metal manufacturing environment, ensuring all quality control processes are followed. Use precision measurement instruments such as FARO, Trimos, Vernier calipers, and Micrometers to inspect and verify part dimensions and quality. Conduct thorough root cause analysis and implement corrective actions for any quality issues that arise. Communicate effectively with customers to resolve quality concerns, ensuring high levels of customer satisfaction. Qualifications:- Bachelor’s degree or diploma in Mechanical Engineering or a related field. - Experience working in the sheet metal industry is required. - Knowledge of quality assurance methodologies, especially PPAP and related industry documentation. - Proficient in using measurement instruments such as FARO, Trimos, Vernier calipers, and Micrometers. - Strong communication skills, particularly in customer interaction and resolving quality concerns. - Demonstrated ability to perform root cause analysis and implement corrective actions.

Job Characteristics: This is an entry level professional engineering position focused on quality problem resolution at manufacturing plants with a focus on plant capabilities in mixing and packaging. Primary objective is continuous improvement in quality, process control, material efficiency and start up of new product production. Education/Work Experience: Degree in Chemistry, Engineering, Food Science, or related field with strong Chemistry component and fewer than two years of experience. For Equipment plants. Degree in Mechanical Engineering or related technical field. Independence level/Reports to: Specific guidance is given about the nature and extent of the work required, methods to be used and results expected. Work is reviewed carefully for thoroughness and accuracy. Our Commitment to a Culture of Inclusion & Belonging Ecolab is committed to fair and equal treatment of associates and applicants and furthering the principles of Equal Opportunity to Employment. We will recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance in all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement. Ecolab will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin,citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, or disability.

Roles and Responsibilities: Candidates having very good logical and analytic abilities. Experience in manual testing of web-based applications. Analyze and clarification of requirements with a customer or a business analyst Very good understanding of QA Test methodology and concepts. Experience in writing clear, concise and comprehensive test cases Maintain the test documentation Strong knowledge of software QA methodologies, tools and processes Solid knowledge of SQL Experience working in an Agile development process Perform test case execution with scenarios. Candidates having very good logical and analytic abilities. Very good understanding of QA Test methodology and concepts. Identifying and selecting the automation test cases. Automating the design of a framework Creating, enhancing, debugging, and running the test cases Managing the changes and executing regression tests Knowledge of JAVA, Selenium, testNG, Junit Experience working with either Selenium or cucumber Experience: 0-2 years

Job Summary: We are seeking a highly skilled and motivated Quality Engineer to join our team. The ideal candidate will be responsible for ensuring that our products meet the highest quality standards and customer expectations. This role involves developing and implementing quality control processes, conducting inspections, and collaborating with various departments to resolve quality issues. Key Responsibilities: Utilize the plant Quality Management System to ensure our products meet customers' expectations. Respond to quality issues as they occur, and utilize root cause analysis tools to solve the problem. Interface with multiple departments, such as customer service, warranty, purchasing, and engineering to ensure customer quality requirements are met. Continuously look for ways to improve the quality system. Develop, implement, and document process improvements to ensure quality and reliability. Lead quality projects for new product introductions. Identify production concerns and take proactive steps to correct problems. Initiate and maintain documentation to support process and manufacturing improvements (e.g., Process Control, Inspection logs, Visual Work Instructions, ECNs). Develop and maintain departmental procedures supporting and maintaining ISO certification. Participate in internal and external periodic plant audits. Support plant internal corrective actions. Qualifications: Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field. Proven experience in quality engineering, preferably in a similar industry. Proficiency in quality management systems and tools (e.g., ISO 9001, Six Sigma). Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Attention to detail and a commitment to quality. Ability to manage multiple projects and meet deadlines. Preferred Qualifications: Master's degree in Engineering or a related field. Professional certifications in quality management (e.g., CQE, Six Sigma Black Belt). Experience with project management tools and methodologies. Knowledge of industry standards and regulations.

Job Summary: We are seeking a highly skilled and motivated Quality Engineer to join our team. The ideal candidate will be responsible for ensuring that our products meet the highest quality standards and customer expectations. This role involves developing and implementing quality control processes, conducting inspections, and collaborating with various departments to resolve quality issues. Key Responsibilities Utilize the plant Quality Management System to ensure our products meet customers' expectations. Respond to quality issues as they occur, and utilize root cause analysis tools to solve the problem. Interface with multiple departments, such as customer service, warranty, purchasing, and engineering to ensure customer quality requirements are met. Continuously look for ways to improve the quality system. Develop, implement, and document process improvements to ensure quality and reliability. Lead quality projects for new product introductions. Identify production concerns and take proactive steps to correct problems. Initiate and maintain documentation to support process and manufacturing improvements (e.g., Process Control, Inspection logs, Visual Work Instructions, ECNs). Develop and maintain departmental procedures supporting and maintaining ISO certification. Participate in internal and external periodic plant audits. Support plant internal corrective actions. Qualifications Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field. Proven experience in quality engineering, preferably in a similar industry. Proficiency in quality management systems and tools (e.g., ISO 9001, Six Sigma). Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Attention to detail and a commitment to quality. Ability to manage multiple projects and meet deadlines. Preferred Qualifications Master's degree in Engineering or a related field. Professional certifications in quality management (e.g., CQE, Six Sigma Black Belt). Experience with project management tools and methodologies. Knowledge of industry standards and regulations.