2222 Quality Engineer Jobs

FPA Inspection & handling of measuring instruments RCA & CAPA Line confirmation 7QC tools Poka yoke Control plan PPAP SPC MSA FMEA Calibration Process Audit, Product audit Lay out inspection Required Candidate profile Process confirmation Petrol inspection CP,CPK,PPK Ready to work in rotational shift Process maping Tracebility Good communication

Role & responsibilities Inspect incoming, in-process, and finished plastic moulded components as per specifications. Carry out visual, dimensional, and functional inspection Verify quality parameters as per drawings, SOPs, and sampling plans . Identify defects Conduct first-piece approval (FPA) and line clearance before production runs. Prepare inspection reports, NCR (Non-Conformance Reports), and rejection summaries . Maintain proper records for ISO and other audits. Support customer complaint analysis and assist in root cause investigations. Qualifications & Skills: Diploma / ITI / B.Sc. (Plastic Technology, Mechanical, or relevant field). 2 - 4 years of experience in QC for plastic injection moulding Hands-on knowledge of QC tools & instruments Strong attention to detail and ability to identify visual and dimensional defects. Knowledge of ISO standards is an added advantage. Work Conditions: Duty Time: 12 hours per shift. Shift System: Flexible to work in rotational shifts (Day/Night) .

Manages Quality process and framework Drives improvement to effectiveness and efficiency of the Quality System Reduces waste (ConQ) through improvement in execution of the Quality processes Protects the customer from manufacturing perturbations Drives effective and efficient execution of Quality processes in the fab Drives structured problem solving and continual improvement actions to reduce Fab ConQ through Quality System Processes (PCRB, iCAR, FMEA, SPC) Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs Work and collaborate other projects and/or assignments as needed Other Responsibilities: Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs Required Qualifications: Bachelor s degree in engineering or science is preferred, Master from a top ranked university is a plus. 5 ~ 7 years of work experience in quality assurance, process improvement, SPC or related field, high-tech and/or semiconductor experience is a plus. Fast learner, strong analytical and problem-solving skills, with the ability to analyze data and identify trends and opportunities for improvement. Excellent communication and interpersonal skills, with the ability to interact with international team members and stakeholders. Self-starter with the ability to work independently and as part of a team. Language Fluency English (written & verbal) This position requires global time-zone coverage in the US, Germany and Singapore and hence you may have to work early or later in the day. Additional Preferred Qualifications: Hands on experience on problem solving/troubleshooting skills. Working knowledge of ISO9001/ IATF16949/ VDA 6.3 Work experience with multi-national and cross functional environments. Possess the right attitude to get results with a Growth Mindset Base knowledge in semiconductor manufacturing Working experience on Power BI

Develop and implement a supplier quality management system to meet the needs of the organisation. Prepare and implement an audit schedule across the current supply base, ensuring detailed and informative visit and audit reports are completed. Prospective suppliers to be audited as identified. Benchmarking activities to be completed with existing suppliers and potential new suppliers. Findings to be incorporated into supplier development plans. Maintain up-to-date records of supplier certifications Work to Engineering Change process ensuring all related documentation and actions are completed. Develop and foster effective working relationships with suppliers, adopting an open and honest approach based on factual evidence. Raise the profile of quality standards and effective monitoring techniques through education and enforcement amongst internal and external stakeholders. Inspection of customer returns related to part quality in the Distribution centre Coordination with Product company SQA, Customer centre Product specialist for challenges Any other reasonable task the manager may deem as suitable for the role. To succeed, you will need Professional Requirements Degree calibre in an Engineering discipline 3 to 5 years experience in an industrial manufacturing role with a prevalent continuous improvement culture Experience of working to ISO quality standards Proven ability of managing projects to required standards Proven ability to develop supplier relationships with a professional approach to conflict resolution Ability to understand and interpret technical drawings Understand a range of manufacturing processes including casting, injection moulding and machining Personal Competencies Attention to detail Ability to work on own initiative with a pro-active strategic approach to challenges Effective team player Excellent oral and written communication skills to build close relationships internally and externally Ability to influence individuals and teams to achieve desired goals and objectives Highly motivated and resilient; committed to seeing tasks through to completion Ability to take a systematic approach to daily operations Systems focused Commercial awareness and clear business acumen

":"Overview About Enerpac Tool Group Enerpac Tool Group is a premier industrial tools and services company serving a broad and diverse set of customers in more than 25 countries The Company s businesses are global leaders in high pressure hydraulic tools, controlled force products and solutions for precise positioning of heavy loads that help customers safely and reliably tackle some of the most challenging jobs around the world The Company was founded in 1910 and is headquartered in Milwaukee, Wisconsin in the United States Enerpac Tool Group trades on the NYSE under the symbol EPAC Our vision is to be our customer s preferred partner through relentless innovation of industrial tools and services that help them safely and reliably tackle their toughest jobs around the world For further information on Enerpac Tool Group and its businesses, visit the Companys website at https://www enerpactoolgroup com/ Business Contribution Support the up-keep and continuous improvement of the Company Quality Management System and provide supplier support in improving manufacturing/operational processes Working with Suppliers to develop systems and processes to ensure clean launch of products at PPAP stages Tracking of APQP with all suppliers in India What you will do: Point of contact for day-to-day Supplier quality issues Lead supplier quality activities with the India supply base Review internal non-conformances and customer complaints and close in a timely manner Investigate problems to identify root causes and implement permanent corrective actions Prepare customer certification dossiers and document packs prior to release of product Maintain KPI data/charts and monitor trends to identify improvement activities and reduce Cost of Poor Quality Responsible for incoming, in process and final quality of parts / products manufactured in Enerpac India Provide support in external audits (Certification body/Customer/Supplier) Create rejection documents/notifications and assist with concessions applications Work closely with other global Quality Engineers and Operational Departments in resolution of quality issues

We're Hiring for "Quality Engineer" position. Preferred Notice Period - Immediate to 15 days. Location - Hyderabad / Vadodara Education & Experience : BE Mechanical or Aeronautical Engineering +4 years in aerospace, aviation, manufacturing quality inspection roles. Technical Skills : Perform visual, dimensional, and functional inspections on incoming aerospace parts, raw materials, and components. Verify received materials against engineering drawings, specifications, purchase orders, and industry standards (e.g., AS 9100). Review and interpret technical drawings and Geometric Dimensioning & Tolerancing (GD&T) to ensure incoming components meet design intent. Use precision measuring tools such as calipers, micrometres, height gauges, dial gauges,bore gauges and coordinate measuring machines (CMMs),Profile projectors etc Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing). Documentation : Prepare detailed inspection records Knowledge of SAP Maintain traceability of all incoming parts by ensuring proper labeling, documentation, and data recording in SAP . Ensure compliance with aerospace industry standards Soft Skills : Good Communication skills ( English),communication to be done with customer ( Indian & Overseas) . Attention to detail and a proactive mindset to ensure compliance with strict aerospace quality requirements

BE / Diploma in Mechanical having 2 years plus relevant experience of Sheet Metal Industry as QA Engineer

JOB SUMMARY Determines appropriate Inspection processes and directs IQC personnel, where applicable, in executing day to day activities. Leads containment and resolution of supplier quality issues with the manufacturers and communicate status on non-conforming parts/suppliers across all programs. Evaluates supplier performance, drives supplier improvements and corrective actions through the SCAR process. ESSENTIAL DUTIES AND RESPONSIBILITIES Defines, develops and implements Supply base strategies that drive improvements is supplier selection, development, and leverage across customer programs for quality improvements and cost savings. Provides regular updates to Quality Engineering Manager on the execution of the strategy. Provides support for NPI activities by participation in the AQP process as required Ensures that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented. Defines and develops the appropriate Inspection Plans and Inspection Methods, directs Receiving Inspection Auditors Defines and develops the inspection processes via inspection aids and instruction guidelines. Ensuring ongoing site supplier evaluation is performed. This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells. Performance will be reported internally, to the supplier, and to the customer where applicable. Monitors and drives PPM issues with the supply base in addition to helping them achieve Dock to Stock certified with Jabil (in accordance to the vendor performance system). Reviews all supplier discrepancies. Coordinates and tracks the corrective/preventative action effort. Proactively communicate information or issues that may impact the product costs or manufacturability to all affected departments. Provides insight and assistance of implementing and maintaining Process Improvement and Optimization concentrating on proactive methodologies with the supply base. Leads SCAR Supplier Corrective/Preventive Action process for problem resolution and continuous improvement, including critical analysis of supplier DOE, CPK, Gauge R&R studies Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. Site RoHS subject Matter Expert May perform other duties and responsibilities as assigned. MANAGEMENT & SUPERVISORY RESPONSIBILITIES Typically reports to Management. Direct supervisor job title(s) typically include: Quality Manager Job is not directly responsible for managing other employees (e.g., hiring/termination and/or pay decisions, performance management). JOB QUALIFICATIONS KNOWLEDGE REQUIREMENTS Strong electro / mechanical background desired; knowledge of plastic injection molding & tooling, metal stampings & tooling, metal fabrication, machining and various electrical components, connectors, PCB & PCBA, cable assembly, full assembly integration etc. Able to read and interpret mechanical drawings (6 sigma training desired). Good skills in MS excel, word, power point, visio, and project. Understanding of the quality system, medical and commercial regulatory requirements and how they relate to the business. Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required. EDUCATION & EXPERIENCE REQUIREMENTS Bachelors degree required, Bachelors degree in Engineering preferred. 3-5 years of experience in Quality or Manufacturing Engineering Or an equivalent combination of education, training or experience.

Urgently Required For Diploma /B.E Mechanical /Automobile For Core Mechanical Company Dept - Production/Quality/ Purchase/Design (Autocad/Catia/Solid works)/ NPD On Roll Basis Male and female both can apply On Roll Basis 7558389633 Immediate join

Key Job description requirements : BE / B tech Mechanical with overall 7-12 Years experience Sound knowledge on GD & T basic concepts Capability of Gauge / Fixture designing / giving strong inputs in this area 'Exposure in handling CMM / OMM Equipements Basic programming knowledge on CMM / OMM Additional advantage if exposure in the equipment like ATOS Q / Sensofar etc Lead in Quality lab oratory Have Min 3-5 Years of experience in Lab oratory Management , as lead Exposure in handling of NABL accredited lab , will be additional advantage Sound knowledge in Concepts like SPC/ MSA - GRR / PFMEA / APQP Exposure in handling high end customers / Customer audits etc Developing team / Multiskilling of the team New supplier development & localization experience Sound english communication Exposure in Automation & advanced MIS platforms Exposure in usage of MINITAB / JMP Exposure in Reliability tests / overall Data management / sample storage requirement clarity etc

Gavade Institute Of Nondestructive Testing & Training is looking for Corrosion Engineer to join our dynamic team and embark on a rewarding career journey Conduct corrosion assessments, monitoring, and root cause analyses. Develop and implement corrosion control strategies, including coatings, cathodic protection, and material selection. Collaborate with design and maintenance teams to ensure corrosion prevention in projects. Review inspection data and recommend corrective measures. Corrosion Engineer : B.E./B.Tech or B.S. Graduation in Metallurgy Engineering + M.Tech in Corrosion.

Candidate Should have knowledge of RCC activity/Material testing and known about Finishing activities. RCC 1. Checking of RCC Activities as per consultant drawings before casting and After casting. (Shuttering, Reinforcement, MEP Work). Also, should have knowledge of relevant IS Codes. 2. Maintaining Preparing Checklist and structure quality. 3.Observation of NCS and its remedies/Compliance. FINISHING 1.Checking of activities as per Architectural specification and company norms/ guideline. 2.Observation Closing of NC and any remedies. 3.Arranging TBT or Training for labours/Contractor/Staff regarding activity work and its Procedure.. RMC- 1.Monitoring of raw material quality and its testing. 2.Maintaining testing data and record. 3.Maintaining calibration of equipments and its record. Material Testing- 1.Testing of building material with reference to IS standards. Reports: - 1.Material Inspection report. 2.Cube testing report 3.Site Visit- Observation and Compliance report (Weekly, Monthly) 4.Concrete Trial reports. 5.Innovation, Demo, and Sampling Report. 6.Raw material Consumption report of Concrete. 7.Consultant Reports.

Candidate Should have knowledge of RCC activity/Material testing and known about Finishing activities. RCC 1. Checking of RCC Activities as per consultant drawings before casting and After casting. (Shuttering, Reinforcement, MEP Work). Also, should have knowledge of relevant IS Codes. 2. Maintaining Preparing Checklist and structure quality. 3. Observation of NCS and its remedies/Compliance. FINISHING 1. Checking of activities as per Architectural specification and company norms/ guideline. 2. Observation Closing of NC and any remedies. 3. Arranging TBT or Training for labours/Contractor/Staff regarding activity work and its Procedure.. RMC- 1. Monitoring of raw material quality and its testing. 2. Maintaining testing data and record. 3. Maintaining calibration of equipments and its record. Material Testing- 1. Testing of building material with reference to IS standards. Reports: - 1. Material Inspection report. 2. Cube testing report 3. Site Visit- Observation and Compliance report (Weekly, Monthly) 4. Concrete Trial reports. 5. Innovation, Demo, and Sampling Report. 6. Raw material Consumption report of Concrete. 7. Consultant Reports. Note civil enginnering background candidate will be preferd .

We have Golden Opportunities in Core Electrical Company at Pune region Job Location - Talegaon / chakan /Bhosari Functional area - R&D /Quality /maintenance Engineer/ Facility-Transportation+ PF + ESI+ ON ROLL Call - 7558389633

Working experience in any Automobiles / Auto Components, Sheet Metal, Press Shop, Weld Shop , Auto Parts Manufacturing Industry.

The Quality Assurance Engineer is responsible for ensuring that products meet the required quality standards and specifications throughout the manufacturing process. This role involves developing and implementing quality control systems, conducting audits, and collaborating with various departments to promote a culture of quality. Key Responsibilities: Quality Control: Develop and implement quality control processes and inspection protocols to ensure compliance with internal and external standards. Audits and Inspections: Conduct regular audits and inspections of manufacturing processes, equipment, and products to identify areas for improvement. Documentation: Maintain accurate records of quality checks, audits, and non-conformance reports. Ensure proper documentation of quality assurance activities. Collaboration: Work closely with production, engineering, and supply chain teams to address quality issues and implement corrective actions. Training: Provide training to staff on quality standards and best practices to foster a quality-oriented culture. Continuous Improvement: Lead continuous improvement initiatives focused on enhancing product quality and process efficiency. Compliance: Ensure compliance with industry standards, regulatory requirements, and company policies. Qualifications: Bachelors degree in Engineering, Manufacturing, or a related field. years of experience in quality assurance or quality control in a manufacturing environment. Strong understanding of quality management systems (e.g., ISO 9001). Proficient in statistical analysis and quality improvement tools (e.g., Six Sigma, Lean). Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills. Preferred Qualifications: Certification in Quality Engineering (CQE) or related credentials. Experience with product testing and validation processes. Ability to work in a manufacturing environment with exposure to machinery and production processes.

Component Quality Production Supervisor : Responsible for in-house produced component and/or subassemblies through PLM and SCM processes. Review of component/process specications, amendment/changes with focus on product functioning Assessment of changes for identifying risks, suggest changes for improvement. Preparation and implementation of Control plan including inspection method Planning of Instruments, gauges/special gauges based on specications etc. and implementing First sample inspection & ISIR preparation Conduct PFMEA as when required and coordinate for actions Involvement in customer complaint and product improvement topics related to IMC component Handling routine inspection carried out through Blue-collar workforce Process capability study as required during ISIR or event based. Training of Blue-collar, personnel inhouse inspection/ inspection-equipment related topics. Drive analysis of deviations related to yield and failure-costs and support in formulating corrective actions with other functions Maintain documentation & records related to QMS, EHS etc. Calibration of internally/externally calibrated instruments Micro-section preparation and evaluation Programming of auto-inspection machines e.g. CMM, TMM etc. Qualication: B.E. Mechanical/D.M.E. with 8-10 years experience in component production & inspection areas Hands on experience in Inspection/metrology for stamped and moulded components is desired Adequate understanding of QMS 9001:2015, internal auditor training advantage, awareness on EHS essential Knowledge and application of Problem-solving techniques, 8D, Process capability Awareness of switchgear products will be advantage. Knowledge/use of digitalization advantage

* Conduct in-process and final quality inspections of switchgear/control panels. * Ensure adherence to quality standards (IS/IEC) and customer specifications. * Maintain quality records, inspection reports, and test certificates.

About Us Hubtric Manufacturing Pvt. Ltd., established in 2018, is a state-of-the-art manufacturing company based in Bangalore. We specialize in CNC machining, VMC operations, assembly kitting, and precision component manufacturing for Aerospace, Defence, and High-Tech industries . Backed by German and Swiss expertise, we deliver innovative, reliable, and high-quality solutions that meet stringent global standards. Job Responsibilities Ensure quality compliance for CNC/VMC machined components and aerospace & defence assemblies . Develop and implement quality inspection plans , SOPs, and work instructions. Perform First Article Inspection (FAI) , PPAP documentation , and manage quality reports as per AS9100 standards . Conduct in-process inspection , final inspection , and prepare NCR (Non-Conformance Reports). Handle customer audits, supplier audits, and internal audits effectively. Collaborate with production & design teams to resolve quality-related issues. Maintain calibration records of measuring instruments, gauges, and CMM. Ensure compliance with Aerospace & Defence quality standards (AS9100, ISO 9001:2015, NADCAP exposure preferred) . Drive continuous improvement, root cause analysis (RCA) , and corrective & preventive action (CAPA). Key Skills Required Strong knowledge of CNC machining, VMC operations, and precision manufacturing processes . Hands-on experience with CMM, VMM, Height Gauge, Vernier, and Micrometers . Familiarity with AS9100D / ISO 9001:2015 quality management systems . Exposure to GD&T, aerospace documentation, and traceability requirements . Strong understanding of FAI, PPAP, APQP, and SPC techniques . Ability to handle customer and defence-related quality audits . Strong analytical, problem-solving, and documentation skills. Knowledge of 5S, Kaizen, Lean manufacturing principles will be an added advantage. Candidate Profile Bachelors degree/Diploma in Mechanical/Production Engineering . 05 years of experience in Quality Assurance/Quality Control in precision machining for Aerospace/Defense sector . Detail-oriented with strong interpersonal and communication skills. Ability to work in a fast-paced startup environment with a focus on innovation and quality. What We Offer Opportunity to work in a growing aerospace & defense manufacturing startup . Exposure to global quality standards and advanced machining practices . A culture that promotes innovation, learning, and continuous improvement . Competitive salary and career growth opportunities.

SUMMARY Represent the quality function of technical support, in conjunction with other internal support groups, regarding issues affecting manufacturing on global customer accounts. Serve as liaison between Jabil Circuit and suppliers or customers on global quality related issues. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Develop and maintain QA plans and timeliness of global new product introductions utilizing Advanced Product Quality Planning and Process Optimization specific to the customer. Provide support for all quoting activities by participation in initial process design, development, and implementation phases. Evaluate and provide input to inspection processes via inspection aids and instruction guidelines. Support all global training programs specific to their customer by development and implementation of specialized training sessions for all applicable functions. Develop appropriate systems for document storage, access and review pertaining to global customer accounts. Review all supplies, internal, and customer discrepancies, coordinate and track the effectiveness of corrective/proactive action efforts. Conduct periodic review and maintenance of all documentation files; develop appropriate systems for document storage and access. Review all supplier or customer discrepancies. Coordinate and track the corrective/preventative action effort. Participate in the vendor survey activities as applicable. Drive proactive participation with suppliers and (when possible) aid in their process improvement efforts. Interface with all departments as applied to the Policies and Procedures. Provide insight and assistance of implementing and maintaining Process Improvement and Optimization concentrating on proactive methodologies. Assist in driving the standardization of manufacturing processes of global customer accounts. Interface and provide technical support on quality issues with the customer as needed. Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS Bachelor's degree required and five years related experience; or equivalent combination of education and experience.

Job Description As a Quality Engineer, you ensure high quality of software solutions in collaboration with the whole development team. Your focus lies on effective testing, quality in automation, programming and deploying software. Automation of test activities plays an important part in your role. You understand and use the required tooling to support this. Job Description - Grade Specific You are an experienced Quality Engineer who can work in various environments. You have demonstrable relevant work experience in Agile projects for clients for at least 3 years. Automation plays an important role in your test activities and you understand and use the tooling to support this.

Should have experience in Dimension Calibration Lab. Handling equipment like ULM, FCDM, DCT, VMM etc. Must have experience handling NABL audit independently & ISO/IEC 17025:2017. Experience minimum 3 years.

Responsibilities: * Conduct quality audits and inspections * Ensure compliance with industry standards * Collaborate with cross-functional teams on product development * Develop and implement quality plans

Job description Job descriptions: 1. Ensure compliance with quality specifications by the inspection and testing of materials, equipment, processes and products at different stages. 2. Handling IQC, process QA, FG QA 3. Document and report on inspection results. 4. Coordinate with the organization’s internal teams to improve product quality and meet customer requirements. 5. Analyze quality data and trends to identify areas for improvement. 6. Control on non-conforming products/processes at all stages 7. Participate in the development of new products/processes to ensure quality requirements are met. 8. Ensure quality performance in accordance with our QAP/ customer specification at all levels, consistently to meet the customer requirements 9. Communicate quality issues to relevant stakeholders. 10. Support continuous improvement efforts by providing feedback on quality issues. Any special requirements: 1. Mechanical discipline. Job Type: Full-time Pay: ₹16,000.00 - ₹18,000.00 per month Benefits: Cell phone reimbursement Health insurance Paid sick time Provident Fund Work Location: In person

Ensure products manufacturing as per standards & specifications. Oversee inspection, testing & documentation. Conduct inspections for raw/finished products.. Maintain proper use of equipment. Maintain documents & MIS. Work with QC/production teams. Required Candidate profile Knowledge of bridge bearing materials and manufacturing processes. Experience in *inspection tools, gauges, UTM, NDT methods etc. *QC in heavy engg./fabrication industry. *QA codes. Good comm. skills