347 Pscad Jobs - Page 3

Job Description Summary Verification & Validation Engineer, will be responsible for the delivery of the of HVDC Controls & Protection Verification and Validation team’s activities on time / as per Project Scheduled through proper coordination between Project and department. The role involves technical understanding of the various work packages within the department ensuring that they meet the requirements, and the relevant processes are followed. Job Description Essential responsibilities: Design, create Factory System Test (FST) cases and review results against design requirements including leading Factory Acceptance Tests (FAT) with clients. Developing HVDC System and plant modelling in electromagnetic transient tools like PSCAD, RSCAD, EMTP-RV etc including undertaking Dynamic Performance Studies and Protection co-ordination. Preparing control system requirements for the RTDS Lab setup including AC DC interface requirement, Plant Emulator Interface requirement and RSCAD Power system network conversion, modelling, and verification. Support New Product Introduction (NPI) to develop existing and new products and tools. Provide support to Commissioning Engineers during Dynamic commissioning at Site. Support continual improvement, raising the effectiveness and efficiency of the team through the introduction of tools, methods and process improvements and coordinating with the Continuous Improvement leaders. Must be flexible with working hours and willing to travel in order to support projects globally for extended period. Qualifications And Requirements Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in HVDC business for 3+ years. Experience in the position of Verification Engineer in High Voltage field, with experience as a Control & Protection design Engineer. Good knowledge of overall 400kV substation, HVDC system (LCC/VSC/SVC) including control and protection system is essential. Experience of developing and working with PSCAD and RSCAD models is essential including knowledge of Overall HVDC System Operational Behaviour. Experience in technical leadership with ability to manage team of validation engineers Strong communication skills with a fluency in English language. Willingness to travel to support projects globally and readiness for flexible with working hours Knowledge of applicable electrical standards such as IEC 61850, IEC 62351, IEC 12207, IEEE 15288, IEC 25010, IEC 27032, NERC/CIP. Desired characteristics Process improvement or RCA experience or certification Experience on MATCAD, PSS/E and MATLAB SIMULINK, EMTP-RV, Digsilent etc will added advantage. Excellent communication and interpersonal skills Additional Information Relocation Assistance Provided: Yes

About Company Founded in 2011, ReNew, is one of the largest renewable energy companies globally, with a leadership position in India. Listed on Nasdaq under the ticker RNW, ReNew develops, builds, owns, and operates utility-scale wind energy projects, utility-scale solar energy projects, utility-scale firm power projects, and distributed solar energy projects. In addition to being a major independent power producer in India, ReNew is evolving to become an end-to-end decarbonization partner providing solutions in a just and inclusive manner in the areas of clean energy, green hydrogen, value-added energy offerings through digitalisation, storage, and carbon markets that increasingly are integral to addressing climate change. With a total capacity of more than 13.4 GW (including projects in pipeline), ReNew’s solar and wind energy projects are spread across 150+ sites, with a presence spanning 18 states in India, contributing to 1.9 % of India’s power capacity. Consequently, this has helped to avoid 0.5% of India’s total carbon emissions and 1.1% India’s total power sector emissions. In the over 10 years of its operation, ReNew has generated almost 1.3 lakh jobs, directly and indirectly. ReNew has achieved market leadership in the Indian renewable energy industry against the backdrop of the Government of India’s policies to promote growth of this sector. ReNew’s current group of stockholders contains several marquee investors including CPP Investments, Abu Dhabi Investment Authority, Goldman Sachs, GEF SACEF and JERA. Its mission is to play a pivotal role in meeting India’s growing energy needs in an efficient, sustainable, and socially responsible manner. ReNew stands committed to providing clean, safe, affordable, and sustainable energy for all and has been at the forefront of leading climate action in India. Job Description Position Title - Manager - Power Systems Studies Experience - 5-8 years Qualification - Post Graduation - Electrical Engineering Location - Gurugram Job Purpose An Electrical Engineer with post graduate/Doctorate qualification in Power system or equivalent with 5-8 years of experience in conducting Power system simulation studies for Electrical Balance of plant systems. Should have fair understanding in systems pertaining to Sub-station (up to 400 KV), SCADA/DCS/SAS, Switching stations, and related transmission lines. Roles and Responsibilities Detailed engineering: Electrical Balance of plant pertaining to Sub-station (up to 400 KV), Switching stations, and related transmission lines, from concept till commissioning of wind farm, which shall also involve Developing models of renewable energy/ Utility transmission & distribution network on power system simulation software, which shall also include Performing studies such as Relay Coordination, Insulation Coordination, Arc Flash Studies etc for stability of Plant through ETAP. Python scripting for PSS/E simulation automation. Performing Grid code compliance studies (Steady state, Power quality & Dynamic studies) for integration of renewable energy to the Grid through PSS-E. Knowledge of PSCAD & EMT studies would be an added advantage. Knowledge on PPC & designing control logic along with system architecture is added advantage Basic idea about substation engineering including various schemes for voltage level up-to 400/220kV level. Familiar to Design calculations/ Electrical Equipment sizing calculations and various Electrical layouts. Preparing technical report for the studies conducted. Knowledge on regulatory requirements put forth by CEA will be an added advantage. Knowledge of Software tools- ETAP(Expert), PSS/E(Intermediate) and PSCAD (Intermediate) AutoCAD, MS-office etc. Python Profile & Eligible Criteria BE/B Tech in electrical engineering from recognized institution with 5-8 yrs. post qualification experience. Candidates with masters in power systems or equivalent would be preferred. Experience on the balance of plant of wind renewable sector OR from the solar / hydro sector OR from the EPC companies who deliver services to the renewable sector/those who are into energy/ power sector. Strong communication & presentation skills.

Job Description Summary Verification & Validation Engineer, will be responsible for the delivery of the of HVDC Controls & Protection Verification and Validation team’s activities on time / as per Project Scheduled through proper coordination between Project and department. The role involves technical understanding of the various work packages within the department ensuring that they meet the requirements, and the relevant processes are followed. Job Description Essential responsibilities: Design, create Factory System Test (FST) cases and review results against design requirements including leading Factory Acceptance Tests (FAT) with clients. Developing HVDC System and plant modelling in electromagnetic transient tools like PSCAD, RSCAD, EMTP-RV etc including undertaking Dynamic Performance Studies and Protection co-ordination. Preparing control system requirements for the RTDS Lab setup including AC DC interface requirement, Plant Emulator Interface requirement and RSCAD Power system network conversion, modelling, and verification. Support New Product Introduction (NPI) to develop existing and new products and tools. Provide support to Commissioning Engineers during Dynamic commissioning at Site. Support continual improvement, raising the effectiveness and efficiency of the team through the introduction of tools, methods and process improvements and coordinating with the Continuous Improvement leaders. Must be flexible with working hours and willing to travel in order to support projects globally for extended period. Qualifications And Requirements Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in HVDC business for 3+ years. Experience in the position of Verification Engineer in High Voltage field, with experience as a Control & Protection design Engineer. Good knowledge of overall 400kV substation, HVDC system (LCC/VSC/SVC) including control and protection system is essential. Experience of developing and working with PSCAD and RSCAD models is essential including knowledge of Overall HVDC System Operational Behaviour. Experience in technical leadership with ability to manage team of validation engineers Strong communication skills with a fluency in English language. Willingness to travel to support projects globally and readiness for flexible with working hours Knowledge of applicable electrical standards such as IEC 61850, IEC 62351, IEC 12207, IEEE 15288, IEC 25010, IEC 27032, NERC/CIP. Desired characteristics Process improvement or RCA experience or certification Experience on MATCAD, PSS/E and MATLAB SIMULINK, EMTP-RV, Digsilent etc will added advantage. Excellent communication and interpersonal skills Additional Information Relocation Assistance Provided: Yes

A Snapshot of Your Day At Siemens Energy, we can. Our technology is key, but our people make the difference. Expert minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value perfection of any kind. Sounds like you? How You’ll Make An Impact Overall Technical responsibility for the preparation of main circuit Parameters and associated power system studies of the special requirements for HVDC Substations. Overall responsibility for preparation of technical parameters of tender documents for high voltage equipment. Technical support to the sales department and the project management for HV Equipment and complete Basic design of HVDC projects. Internal project supervision (timelines, costs, quality) Preparation and active participation of technical decisions in arrangement with the project manager and technical project manager Regular sub project reports, regular meetings with regards to project progress, constant monitoring project landmarks Identifying and evaluating risks and opportunities within projects. Working out suggestions to minimize possible risks, recognizing benefits and opportunities. What You Bring Knowledge acquired in 7 - 15 years in HVDC Engineering Bachelor’s or master’s degree in electrical engineering or relevant experience Possess excellent knowledge of Power System studies tools, requirement analysis, Power system modelling. Proficiency in LV Breaker study, Relay co-ordination, Protection scheme validation etc. Experience of high voltage projects including concept design, modeling, testing and acceptance Proficiency in power system analysis packages PSSE, PSCAD, MEATHEAD and MATLAB.? Expertise in power system studies for a wide range of projects including Load flow, fault level, transient stability, harmonics, protection settings, relay co-ordination, motor starting, sub synchronous oscillation/resonance, cable routing, CT/PT sizing, etc. Expert level knowledge with all of the following: HV measuring components, HV transmission transformers, HV switchgear, HV Reactors/Resistors/Capacitors Solid Understanding of HVDC technologies, main circuit parameters calculation, Insulation co-ordination, Transient stress, fault scenarios. Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key and demand for green H2 and derivative fuels will rise. We enable decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities. Candidates want to learn about the divisions they will be joining–the structure, how it works together, and the role it plays in driving Siemens Energy’s mission forward. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our distributed team is committed to making balanced, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is motivated by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Rewards/Benefits All employees are automatically covered under the Medical Insurance. Company paid considerable Family floater cover covering employee, spouse and 2 dependent children up to 25 years of age. Siemens Energy provides an option to opt for Meal Card to all its employees which will be as per the terms and conditions prescribed in the company policy as a part of CTC, tax saving measure Flexi Pay empowers employees with the choice to customize the amount in some of the salary components within a defined range thereby optimizing the tax benefits. Accordingly, each employee is empowered to decide on the best Possible net income out of the same fixed individual base pay on a monthly basis. https://jobs.siemens-energy.com/jobs A Snapshot of Your Day

Vestas is well-known in wind technology and actively contributes to its development. Vestas’ core business comprises the development, manufacture, sale, marketing, and maintenance of Wind Turbines. Come and join us at Vestas! Frontend Engineering & Technology > Global Power Plant Solutions > Grid Interconnection Excellence Grid Interconnection Excellent (GIE) team is based in Chennai. This team is one of the functions in Global Power Plant Solutions. Our role is to support the power plant solution teams in the regions. GIE is a highly skilled team and work for a specialized area like weak grid, off-shore, hybrid power plant, harmonic assessment, simulation with detailed grid model and eBoP aspect of the plant. Responsibilities Simulation and modelling of the wind or hybrid Power Plant including WTG, PV and storage Studying grid interconnection requirement and grid codes Analyzing site specific grid interconnection solutions Design or review the design for the BoP (balance of plant) for wind power plant Lead a group of engineers on one of the technical specialized area like harmonic, weak grid connection assessment, system impact analysis, BoP optimization or SSCI Development of the tools, methods and process related to the power system analysis studies Presentations and meeting with Grid operators/customers for project specific needs Work in close co-ordination with the Regional Technical Sale support team Report writing Qualifications Master's / Bachelors in Power system / Similar engineering specialization Acumen with minimum Industry experience of 8 years in power system 2 years of experience in renewable grid interconnection Candidate with proficient communication skills You speak and write English fluently Tools experience in PSS/E Power Factory / PSCAD / ETAP Competencies Knowledge of simulation tools like PSS/E Power Factory, PSCAD, or equivalent Experience of working for substation design and power system analysis Solid electrical engineering background in relation to the substation engineering, Load flows, short circuit, transient analysis, harmonic assessment, relay settings and co-ordinations and BoP You are motivated, organized, and result oriented attitude Good at using MS-OFFICE products (WORD, EXCEL, POWER POINT etc) What We Offer We offer a very exciting job in a flat, multi-cultural and innovative department focusing on reaching top-quality results. To us, it is all about knowing the market and our customers, defining the right solutions and getting it done - all in the best possible way. We would like you to participate in that mission. Additional Information Your primary workplace will be Vestas India, Chennai. Please note: We do amend or withdraw our jobs and reserve the right to do so at any time, including before the advertised closing date. Please be advised to apply on or before 17th August 2025. BEWARE – RECRUITMENT FRAUD It has come to our attention that there are a number of fraudulent emails from people pretending to work for Vestas. Read more via this link, https://www.vestas.com/en/careers/our-recruitment-process DEIB Statement At Vestas, we recognise the value of diversity, equity, and inclusion in driving innovation and success. We strongly encourage individuals from all backgrounds to apply, particularly those who may hesitate due to their identity or feel they do not meet every criterion. As our CEO states, "Expertise and talent come in many forms, and a diverse workforce enhances our ability to think differently and solve the complex challenges of our industry". Your unique perspective is what will help us powering the solution for a sustainable, green energy future. About Vestas Vestas is the energy industry’s global partner on sustainable energy solutions. We are specialised in designing, manufacturing, installing, and servicing wind turbines, both onshore and offshore. Across the globe, we have installed more wind power than anyone else. We consider ourselves pioneers within the industry, as we continuously aim to design new solutions and technologies to create a more sustainable future for all of us. With more than 185 GW of wind power installed worldwide and 40+ years of experience in wind energy, we have an unmatched track record demonstrating our expertise within the field. With 30,000 employees globally, we are a diverse team united by a common goal: to power the solution – today, tomorrow, and far into the future. Vestas promotes a diverse workforce which embraces all social identities and is free of any discrimination. We commit to create and sustain an environment that acknowledges and harvests different experiences, skills, and perspectives. We also aim to give everyone equal access to opportunity. To learn more about our company and life at Vestas, we invite you to visit our website at www.vestas.com and follow us on our social media channels. We also encourage you to join our Talent Universe to receive notifications on new and relevant postings.

A Snapshot of Your Day At Siemens Energy, we can. Our technology is key, but our people make the difference. Expert minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value perfection of any kind. Sounds like you? How You’ll Make an Impact Overall Technical responsibility for the preparation of main circuit Parameters and associated power system studies of the special requirements for HVDC Substations. Overall responsibility for preparation of technical parameters of tender documents for high voltage equipment. Technical support to the sales department and the project management for HV Equipment and complete Basic design of HVDC projects. Internal project supervision (timelines, costs, quality) Preparation and active participation of technical decisions in arrangement with the project manager and technical project manager Regular sub project reports, regular meetings with regards to project progress, constant monitoring project landmarks Identifying and evaluating risks and opportunities within projects. Working out suggestions to minimize possible risks, recognizing benefits and opportunities. What You Bring Knowledge acquired in 7 - 15 years in HVDC Engineering Bachelor’s or master’s degree in electrical engineering or relevant experience Possess excellent knowledge of Power System studies tools, requirement analysis, Power system modelling. Proficiency in LV Breaker study, Relay co-ordination, Protection scheme validation etc. Experience of high voltage projects including concept design, modeling, testing and acceptance Proficiency in power system analysis packages PSSE, PSCAD, MEATHEAD and MATLAB.? Expertise in power system studies for a wide range of projects including Load flow, fault level, transient stability, harmonics, protection settings, relay co-ordination, motor starting, sub synchronous oscillation/resonance, cable routing, CT/PT sizing, etc. Expert level knowledge with all of the following: HV measuring components, HV transmission transformers, HV switchgear, HV Reactors/Resistors/Capacitors Solid Understanding of HVDC technologies, main circuit parameters calculation, Insulation co-ordination, Transient stress, fault scenarios. Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key and demand for green H2 and derivative fuels will rise. We enable decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities. Candidates want to learn about the divisions they will be joining–the structure, how it works together, and the role it plays in driving Siemens Energy’s mission forward. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our distributed team is committed to making balanced, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is motivated by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Rewards/Benefits All employees are automatically covered under the Medical Insurance. Company paid considerable Family floater cover covering employee, spouse and 2 dependent children up to 25 years of age. Siemens Energy provides an option to opt for Meal Card to all its employees which will be as per the terms and conditions prescribed in the company policy as a part of CTC, tax saving measure Flexi Pay empowers employees with the choice to customize the amount in some of the salary components within a defined range thereby optimizing the tax benefits. Accordingly, each employee is empowered to decide on the best Possible net income out of the same fixed individual base pay on a monthly basis. https://jobs.siemens-energy.com/jobs A Snapshot of Your Day

Electrical Engineer – Power System Location: Hyderabad (Work from Office) Experience: 6 months to 3 years Position Type: Permanent Perform short circuit studies, insulation coordination, transient and dynamic stability analysis Conduct detailed arc flash hazard analysis and risk assessments Utilize ETAP, PSCAD, and other simulation tools for modeling and evaluation Prepare technical reports and recommendations for industrial and utility clients Looking for Immediate or with in the week joining.

Job Description Summary We are seeking a highly skilled Reliability Consulting Engineer with a strong background in protection and control systems, energy management devices, and utility-scale software for transmission and distribution (T&D) applications. In this role, you will lead reliability initiatives across the lifecycle of critical grid automation products, including protection relays, control devices, digital substation solutions, and advanced software platforms. You will apply best-in-class reliability engineering methodologies to ensure system resilience, regulatory compliance, and long-term field performance. Your work will directly support utility customers in achieving higher uptime, reduced lifecycle costs, and safer grid operation. Job Description Key Responsibilities Perform reliability modeling and statistical analysis of energy management and protection/control products to predict field performance and act as authority for reliability design decisions. Develop and execute reliability test plans for hardware and software, including hardware-in-the-loop (HIL), environmental, and stress testing for grid components. Conduct and lead FMEA, FMECA, and Root Cause Analysis (RCA) for hardware/software failure events across embedded systems and communication layers. Work with product design, systems engineering, and software teams to ensure Design for Reliability (DfR) is embedded from concept through deployment. Analyze field data from deployed devices (e.g., relays, RTUs, control systems) to identify systemic issues and recommend corrective/preventive actions. Collaborate with utilities and customers to support grid asset performance programs and grid modernization initiatives, including IEC 61850, virtualization, and advanced diagnostics. Develop and maintain reliability KPIs (e.g., MTBF, FIT rate, availability) for product lines and integrate into product development and quality programs. Identify and drive adoption of predictive and condition-based maintenance strategies using remote diagnostics, SCADA, and sensor data. Consult and align with the Innovation Office and Applications team to ensure reliability priorities influence working group participation, standards leadership, and technology strategy. Stay current on regulatory compliance requirements (e.g., NERC, IEEE, IEC standards) impacting utility asset reliability and cybersecurity. Provide coaching, training, and guidance on reliability practices to internal teams and external stakeholders. Required Qualifications Bachelor’s degree in electrical engineering, Systems Engineering, or a related discipline. Minimum of 7 years of experience in reliability, systems, or product engineering in the energy or utility sector. Desired Characteristics Familiar with protection & control systems, grid-edge devices, substation automation, and utility-grade software solutions. Hands-on experience with reliability engineering tools and standards (e.g., ReliaSoft, ISO 9001/55000, IEC 61025). Familiarity with communications protocols and standards used in T&D systems: IEC 61850, DNP3, Modbus, IEEE C37.118, etc. Strong analytical skills and experience with data analysis platforms (e.g., Python, R, Minitab, Power BI). Excellent written and verbal communication skills; able to engage cross-functional teams and utility customers. Understanding of grid reliability challenges in T&D environments & willingness to travel for customer engagements, conferences, and global collaboration. Collaborative leadership across engineering, field teams, and customers Data-driven problem-solving mindset with attention to long-term product health including systems thinking Proactive approach to emerging technologies and continuous improvement Master’s degree in Reliability or Systems Engineering. Certified Reliability Engineer (CRE) or similar professional certification. Familiar with model-based design and HIL testing (e.g., RTDS, PSCAD, or EMTP) for utility applications and simulation tools used in electronics and CAD design Experience working directly with T&D utilities, supporting product deployments, failure investigations, or asset strategies. Familiarity with cybersecurity risk and reliability considerations for critical infrastructure. This role is expected to close on 7/21/25. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor’s welfare benefit plan or program. This document does not create a contract of employment with any individual. Additional Information Relocation Assistance Provided: No

University: Delft University of Technology Country: Netherlands Deadline: 2025-08-01 Fields: Electrical Engineering, Power Systems Engineering, Computer Science, Control Engineering, Energy Systems Are you passionate about shaping the future of electrical power systems and eager to contribute to the transition toward more sustainable energy networks? Do you envision your research making a tangible impact on the reliability, efficiency, and stability of tomorrow’s power grids? If so, the postdoctoral position in the MITIGATE-HARM project at TU Delft may be the perfect next step in your academic career. About The University Or Research Institute Delft University of Technology (TU Delft) stands as one of the world’s premier institutions for science, engineering, and design. Renowned for its pioneering work in fields ranging from the Dutch waterworks to cutting-edge biotechnology, TU Delft is internationally recognized for excellence in research, education, and innovation. The university’s Faculty of Electrical Engineering, Mathematics, and Computer Science is home to the Department of Electrical Sustainable Energy, which addresses critical technical, scientific, and societal challenges associated with the global transition to sustainable energy systems. Located in Delft, the Netherlands, TU Delft provides a vibrant academic environment, state-of-the-art laboratories, and a collaborative culture that encourages interdisciplinary problem-solving. Research Topic and Significance The MITIGATE-HARM project focuses on developing advanced control and protection concepts for multi-terminal High Voltage Direct Current (HVDC) power systems. As the integration of renewable energy sources and power electronics in modern grids increases, so does the complexity of ensuring their stable and reliable operation. Harmonic instabilities and resonances in hybrid power systems (HPS) present significant challenges to grid planners and operators. This project directly addresses these challenges by enabling harmonic stability assessment and proposing robust mitigation strategies. The outcomes will not only advance the planning and interoperability of HVDC grids but also contribute to the wider adoption of clean, sustainable energy technologies, making this research highly relevant to both scientific advancement and societal needs. Project Details This is a 2-3 year postdoctoral appointment, expected to begin on December 1, 2025, under the supervision of Dr. Aleksandra Lekić, Associate Professor. The successful candidate will join the Intelligent Electrical Power Grids (IEPG) section within the Faculty of Electrical Engineering, Mathematics, and Computer Science. The IEPG group, led by Prof. Dr. Peter Palensky, is dedicated to advancing the reliability, efficiency, and safety of future power systems through innovative research in power technologies and smart controls. The Department of Electrical Sustainable Energy offers extensive facilities, including a large ESP laboratory, high voltage and DC grids testing environments, and one of the largest academic Real-Time Digital Simulation (RTDS) infrastructures for AC and DC protection and monitoring. The MITIGATE-HARM Project Entails – Developing a mathematical framework for identifying instabilities and resonances within the HPS. – Proposing and implementing mitigation measures to ensure stable power system operation. – Incorporating these solutions into the Harmony toolbox using C++ programming (see: https://cresym.eu/harmony/). – Engaging in real-world collaborations with Transmission System Operators (TSOs) and academic partners. Candidate Profile The Ideal Candidate For This Postdoctoral Position Will Possess – A completed Ph.D. in a highly technical discipline (such as electrical engineering, computer science, or a closely related field), with outstanding academic performance. – Excellent knowledge of electrical power systems and power electronics, particularly in the context of HVDC systems. – Proven experience in modeling and simulation of power electronic-based power systems, including the identification and mitigation of resonances and instabilities. – Strong programming skills in C++ and MATLAB; experience with PSCAD simulation is an advantage. – Deep understanding of power electronic device operation and control strategies for HVDC applications. – Proficiency in English (reading, writing, speaking, and listening). – Independence, motivation, eagerness to learn, and a collaborative mindset. – A strong desire to link real-world challenges with academic research and contribute to the energy transition. Application Process Applications are invited until August 1, 2025. Interested candidates should apply via the TU Delft application portal (https://careers.tudelft.nl/job/Delft-Postdoc-Mitigate-Harmonics-in-Power-Electronics-based-Power-Systems-2628-CD/825013002/) by uploading the following documents: – CV, including a list of academic and/or industry references. – A list of grades from qualifying degrees (BSc, MSc). – A cover letter detailing motivation and alignment with the job requirements. The selection process will involve an initial interview, with short-listed candidates invited for a second round. Conclusion If you are driven by the ambition to advance power system research and eager to contribute to the sustainable energy transition, seize this opportunity to join TU Delft’s world-class research community. Apply before August 1, 2025, and take a significant step forward in your academic and professional journey. For more opportunities in related fields, continue to explore and stay connected to the latest openings. Get the latest openings in your field and preferred country—straight to your email inbox. Sign up now for 14 days free: https://phdfinder.com/position-alert-service/ We’re an independent team helping students find opportunities. Found this opportunity helpful? Support us with a coffee! Also See Postdoctoral Opportunity in Harmonic Mitigation for Power Electronics-Based Power Systems at… Immediate Funded PhD & Master’s Student Openings in Resilient Energy Grid Adaptation at… PhD Position in Power Electronics and Energy Systems at University of Pavia Postdoctoral Fellowship in Bidirectional Wireless Charging Systems for Electric Vehicles and… Master Thesis Opportunity in Ultrafast Photonics at Helmut Schmidt University

Job Description Duties and Responsibilities: Conduct design and analysis of electrical power systems, including generation, transmission, and distribution. Experience in South East Asia, Australia would be an added advantage. Independently perform complex power system analysis and design tasks, including load flow, stability, and transient analysis, with minimal supervision. Conduct data collection, analysis, and interpretation to support project requirements. Support Lead offices in preparation of detailed technical reports, proposals, and presentations for clients and any other stakeholders. Support project management activities, including scheduling, budgeting, and resource allocation. Collaborate with team members and participate in project meetings to discuss progress and technical challenges. Conduct technical reviews and provide mentorship to junior engineers and interns. Ensure compliance with industry standards, regulations, and company policies in all engineering tasks. Lead initiatives in improvement of project execution processes, methodologies, and task automation. Lead small project teams and coordinate with Lead office, external stakeholders to ensure project success. Stay updated with industry trends, standards, and best practices to ensure high-quality engineering solutions. Duties may include extended, but temporary, out-of-town assignments. Qualification Bachelor’s degree in electrical engineering. 13-18 years of experience in power system engineering or a related field. Advanced proficiency in power system analysis software (PSS/E required plus other software including PSCAD, DIgSILENT PowerFactory, ETAP, etc.) with connection studies experience. Proficiency in Python scripting and automation of power system studies. Strong knowledge of power system principles, equipment, and protection schemes. Ability to work independently with lead office as part of an integrated team. Ability to lead medium/large scale projects, manage/supervise a team to ensure timely project delivery. Excellent analytical, problem-solving, and project management skills. Effective communication and leadership abilities, with experience mentoring junior engineers. Ability to effectively handle multiple responsibilities, including line management, resource planning, recruitment, skill gap/training needs identification, etc., alongside project delivery. Demonstrates the flexibility to work hands-on in preparation of deliverables, based on project needs/exigencies. Ability to interpret the scope, identify deliverables based on Tender/RFP documents. Ability to line manage, mentor a pool of junior engineers to develop skills and bring in efficiency within the team. Demonstrates a fair understanding of project commercials - cost monitoring and timely flagging of variations. Strong communication skills - written and oral. Self-motivated individual with a keen interest to add value to the team/organization. Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Location(s): Mumbai, MH, IN Bengaluru, KA, IN Noida, UP, IN Contract Type: Permanent Work Pattern: Full Time Market: Energy Discipline: Energy Job Ref: 9698 Recruiter Contact: Abhimanyu M S

Job Description Duties and Responsibilities: Conduct design and analysis of electrical power systems, including generation, transmission, and distribution. Experience in South East Asia, Australia would be an added advantage. Independently perform complex power system analysis and design tasks, including load flow, stability, and transient analysis, with minimal supervision. Conduct data collection, analysis, and interpretation to support project requirements. Support Lead offices in preparation of detailed technical reports, proposals, and presentations for clients and any other stakeholders. Support project management activities, including scheduling, budgeting, and resource allocation. Collaborate with team members and participate in project meetings to discuss progress and technical challenges. Conduct technical reviews and provide mentorship to junior engineers and interns. Ensure compliance with industry standards, regulations, and company policies in all engineering tasks. Lead initiatives in improvement of project execution processes, methodologies, and task automation. Lead small project teams and coordinate with Lead office, external stakeholders to ensure project success. Stay updated with industry trends, standards, and best practices to ensure high-quality engineering solutions. Duties may include extended, but temporary, out-of-town assignments. Qualification Bachelor’s degree in electrical engineering. 13-18 years of experience in power system engineering or a related field. Advanced proficiency in power system analysis software (PSS/E required plus other software including PSCAD, DIgSILENT PowerFactory, ETAP, etc.) with connection studies experience. Proficiency in Python scripting and automation of power system studies. Strong knowledge of power system principles, equipment, and protection schemes. Ability to work independently with lead office as part of an integrated team. Ability to lead medium/large scale projects, manage/supervise a team to ensure timely project delivery. Excellent analytical, problem-solving, and project management skills. Effective communication and leadership abilities, with experience mentoring junior engineers. Ability to effectively handle multiple responsibilities, including line management, resource planning, recruitment, skill gap/training needs identification, etc., alongside project delivery. Demonstrates the flexibility to work hands-on in preparation of deliverables, based on project needs/exigencies. Ability to interpret the scope, identify deliverables based on Tender/RFP documents. Ability to line manage, mentor a pool of junior engineers to develop skills and bring in efficiency within the team. Demonstrates a fair understanding of project commercials - cost monitoring and timely flagging of variations. Strong communication skills - written and oral. Self-motivated individual with a keen interest to add value to the team/organization. Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Location(s): Mumbai, MH, IN Bengaluru, KA, IN Noida, UP, IN Contract Type: Permanent Work Pattern: Full Time Market: Energy Discipline: Energy Job Ref: 9698 Recruiter Contact: Abhimanyu M S

Major Responsibilities:- Functional type testing of AC protection functions for the HVDC stations as per the IEC standards using secondary injection kits and real time simulation environment and getting the certification done by the authorized external laboratories. Developing automated test solutions for the AC protection functions for the HVDC projects. Developing virtual unit testing solutions for the HVDC protection functions. Supporting projects in resolving issues related to protection functions Performing pre studies for the proposed control and protection ideas using EMT tools and identifying the right solutions. Suggest new improvements, which really aid our business related to control and protection functions. Additional Responsibilities:- 1. Supports global R&D projects with the implementation and verification of the latest technology development using the Hardware in loop environment of latest development studies. 2.Setting up and maintaining the lab environment for the different HVDC R&D projects. 3.Developing control and protection solutions encompassing full development cycle (design to delivery) for the future HVDC technologies, ongoing HVDC projects and other business units. 4. Developing test cases using EMT tools for the testing of HVDC control and protection functions in the virtual environment. Living our client's core values safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Preferred candidate profile 1. BE/BTECH in Electrical and electronics engineering with 4 to 8 years of experience. 2. A recent Master's graduate in Power Systems, eager to embark on a challenging career, contribute to innovative projects, and excel in the energy sector. 2. Knowledge in Testing and commissioning of substation control and protection system. 3. Should understand different control and protection schematics of a HV/LV electrical substation. 4.Any experience in an area of power system design and engineering is also welcome to apply for this role 3.Basic knowledge about communication protocols like IEC61850, MODBUS etc. 4.Should have experience in using secondary test kits like Omicron, Doble etc. 5. Knowledge of PSCAD, MATLAB, or any other simulation software available for electric power system and control system and RTDS, Hyper Sim, or any other electric power system simulators is an added advantage. 6. Knowledge about HVDC control and protection system will be considered as a plus. 7. Experience with protection test case automation using scripts is an added advantage. 8. Adequate communication skills for effective cooperation with colleagues, partners, customers and other necessary stakeholders.

The ideal candidate should have: 4+ Years · 5-8 Years of experience in power system studies · Experience working with US utilities, developers, and transmission operators. · Experience in international (Overseas) power markets is a plus. · Strong technical expertise in Solar + Bess interconnection, protection coordination, load flow, and stability studies and understanding of transmission network of US and India. · Proficiency in PSCAD, ETAP, PSS/E, SIMCAP. Or similar power system analysis tools. · Ability to work closely with engineering, consulting, and AI-driven technology development teams.

You will be responsible for conducting functional type testing of AC protection functions for HVDC stations in accordance with IEC standards. This involves utilizing secondary injection kits and real-time simulation environments and obtaining certification from authorized external laboratories. In this role, you will play a key part in supporting global R&D projects by implementing and verifying the latest technology developments using Hardware in the Loop (HIL) environments. You will be responsible for setting up and maintaining the laboratory environment for various HVDC R&D projects and developing control and protection solutions covering the full development cycle for future HVDC technologies. Your responsibilities will also include developing test cases using EMT tools for testing HVDC control and protection functions in a virtual environment, creating automated test solutions for AC protection functions, and developing virtual unit testing solutions for HVDC protection functions. Additionally, you will assist in resolving issues related to protection functions, conducting pre-studies for proposed control and protection ideas, and suggesting improvements to enhance business operations. As a candidate, you should hold a Bachelor's degree in Electrical & Electronics Engineering or a Master's in Power Systems, along with 2 to 8 years of relevant experience. You should possess knowledge in testing and commissioning of substation control and protection systems, understand various control and protection schematics of HV/LV electrical substations, and have a basic understanding of communication protocols like IEC61850 and MODBUS. Experience with secondary test kits such as Omicron and Doble is required, and familiarity with simulation software like PSCAD, MATLAB, and RTDS is advantageous. Moreover, any experience in power system design and engineering will be beneficial for this role. Knowledge of HVDC control and protection systems and experience with protection test case automation using scripts are considered valuable assets. By adhering to Hitachi Energy's core values of safety and integrity, you will be responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines. If you are a qualified individual with a disability and require accommodation during the job application process, you may request reasonable accommodations by completing a general inquiry form on the Hitachi Energy website. Please provide your contact information and specific details about the accommodation you need to support you in the application process. This opportunity is exclusively for job seekers with disabilities requiring accessibility assistance.,

The opportunity: As an Engineering authority specializing in design studies and performance evaluation studies for projects/tenders related to Flexible A.C. Transmission Systems (FACTS) technology aligned with Power Quality Solutions (PQS) Business, you will play a crucial role in shaping the future of power systems. How you'll make an impact: - You will define the topology and single-line diagram for FACTS solutions based on customer requirements. - You will specify main circuit components such as Power Transformer, Power Electronics Valves, Reactors, Capacitors, CT, VT, Breaker, etc., according to customer specifications and international standards. - Coordinating with suppliers, you will ensure optimal design of the mentioned components and evaluate their design and test record documents. - Your responsibilities will also include performing design studies such as harmonic performance, protection design, insulation coordination, loss evaluation, and reliability study. - You will create and validate power system equivalents in RMS (PSSE/DIGSILENT) and EMT (PSCAD/EMTP) software packages. - Developing an understanding of control algorithms and staying updated with new control methodologies for FACTS applications will be a key part of your role. - Dynamic performance studies, with FACTS devices integrated into power system networks, will be conducted using RMS and EMT software packages. - You will develop FACTS solution models in multiple RMS and EMT software packages, ensuring accuracy and efficiency. - Collaboration and communication with other disciplines involved in project and tender deliveries will be essential. - Your involvement in research and development activities as per business requirements is expected. - Participating in customer discussions and supporting Project Management/Product Management/Application Engineering teams in customer acquisition and consultation will be part of your responsibilities. - Ensuring compliance with applicable external and internal regulations, procedures, and guidelines will be your responsibility, reflecting Hitachi Energy's core values of safety and integrity. Your background: - Ideally, you hold a PhD in Power Systems with 1-3 years of relevant work experience, an M. Tech in Power Systems with 2-5 years of relevant work experience, or a B.E/B. Tech in Electrical Engineering with 5-10 years of relevant work experience. - You should have an in-depth understanding of the basics of power system steady state, dynamic, and transient behavior. - Experience in specifying power system components, evaluating vendor documents, and/or conducting grid integration studies for power electronics converter-based applications is desired. - Knowledge of simulation tools like PSCAD, PSSE, DIGSILENT, EMTP, RTDS, and MATLAB, as well as an understanding of international standards for specifying power system components/solutions, is beneficial. - You should be a good team player, capable of working effectively in multi-disciplinary and multi-cultural teams. - Strong communication skills, organizational abilities, attention to detail, ambition, creativity, problem-solving skills, and the ability to work in a fast-paced environment are essential qualities for this role. Qualified individuals with disabilities requiring accessibility assistance during the job application process can request reasonable accommodations by completing a general inquiry form on the Hitachi Energy website. Specific details about the required accommodation should be included to support applicants during the application process.,

About the Company: The Hitachi Energy India Operations Center (INOPC) houses over 3,000 energy transition technologists in three locations from grid automation, transformers, high voltage products, grid integration and service businesses. Spread over 3,00,000 sq feet, with nearly 50,000 sq feet of dedicated lab space, the center brings under one roof diverse engineering capability that has been built over the years, fostering collaboration to advance the worlds energy system to be more sustainable, flexible and secure. INOPC supports Hitachi Energy units across 40+ countries to deliver projects in 80+ countries. We are technology leaders at the forefront of evolving the world’s future energy system. The rising energy consumption with changing lifestyles and rapid urbanization, is driving the need for affordable, reliable and sustainable energy. Our innovative technologies help to make the energy system more resilient, secure and safe. Electricity will be the backbone of the carbon-neutral future and together, with customers and partners, we are co-creating solutions that are helping to accelerate the energy transition. Customers count on our technologies to help them to integrate huge volumes of renewable energy into the world’s grids and manage increasing levels of complexity; and our technologies are also instrumental to the electrification of transportation, industry and smart life sectors. The center equally focuses on catering to grow complexity in domestic and international grids and is a key lever for Hitachi Energy’s growth globally. How you’ll make an impact: To successfully take on this position, you need to be thorough and structured with a high technical interest and strive for good solutions within the set time limits. You will be involved in projects, tenders, base work. To grow with each task, enabling yourself to develop and take more and more responsibility. HVDC is a complex product, there is always more to learn. Model and study the stability of HVDC system through simulations in PSCAD/EMTDC, PSSE, Power factory and design the controllers. Handle the interface with other interfacing departments. Ensuring you understand their needs, and they yours, and to work for a good corporation for best end results together. Living Hitachi Energy core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your Background: Should have B.E. in EEE with 5+Years Experience) / Master of Engineering - Power System (3 - 8 years experience)/ PhD - Power System (1-5 years experience) You should have extensive knowledge of Power Systems studies and modelling of electrical network /HVDC/FACT. You should have knowledge of Power Transmission Projects (EPC) along with PSSE, PSCAD, Matlab, Power Factory Extensive knowledge of Power Systems equipment and their purpose, such as Power Transformers, Capacitors, Reactors, Instrument Transformer and measuring equipment, Circuit Breakers, Disconnector, Surge Arrester etc. Knowledge in selection, sizing and integration of above equipment based on customer functional specification. Strong communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams. Attention to detail and a commitment to delivering high-quality digital solutions.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. AECOM is seeking for a candidate to be based in Bengaluru or Gurgaon. Candidate will be responsible for the following activities: Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Minimum Requirements Overall 8+ years of work experience is preferred. Previous experience in HV Cable OEM design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Underground HV Cables design is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with CYMCAP or other similar software tools for EHV/HV AC and DC Cable Ampacity calculations, EMTP Calculations and modelling expertise is highly desirable Chartership with IET-UK or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory Additional Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our employees and their families. We also provide a robust global well-being program. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. #LI-FS1

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. AECOM is seeking for a candidate to be based in Bengaluru or Gurgaon. Candidate will be responsible for the following activities: Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Minimum Requirements Overall 8+ years of work experience is preferred. Previous experience in HV Cable OEM design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Underground HV Cables design is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with CYMCAP or other similar software tools for EHV/HV AC and DC Cable Ampacity calculations, EMTP Calculations and modelling expertise is highly desirable Chartership with IET-UK or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory Additional Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our employees and their families. We also provide a robust global well-being program. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. #LI-FS1

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree in Power Systems / Energy Systems or equivalent education from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., IET UK) Minimum Requirements Overall 6+ years of work experience in consulting or design organization is preferrable. Prior experience in performing Grid Connection related (PSSE / PSCAD / ETAP / DigSilent Power Factory / CDEGS / Equivalent) dynamic or advanced power system studies is preferred. Experience on System Studies for large EHV Grid Substations is mandatory. As a minimum System Study experience needed in Load Flow, Short Circuit Studies, Motor Starting Studies, Relay Coordination, Arch Flash Studies, Harmonic Studies, Unbalance load study, Relay Settings, Earthing Design, Cable Ampacity, Insulation Coordination, etc. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Substations and Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Very good communication skills (Oral and Written) in English language is mandatory Additional Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our employees and their families. We also provide a robust global well-being program. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. Join us and let’s get started. #LI-FS1

At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Site Manager-Hyderabad , Siemens Energy, Full Time Looking for a challenging role If you really want to make a difference - make it with us We make real what matters. About the role We require young, qualified Service Engineer for Large Power Transformer and Reactor as well as DT at Transformer Factory Kalwa. Key Responsibilities Work experience of handling customer complaint. Sales & Service of Transformer & Reactor Spare. Work in the back office supports teams to register the customer complaint and to provide support to Customer & Field service engineers for resolution of site complaints. Hands on experience for Installation & commissioning of Power & HVDC transformer & reactor up to 500 MVA & 765 KV at site. QMS & EHS implementation and updating ISO 14001 and ISO 45001documentation. To follow the NCR Management system analysis and its timely compliance. Implementation of CAPA measures. Participation in Shop floor activities like Quality corner, Quality gate, and project closure meetings at factory. Should be capable to handle the site manpower, contractor manpower, meeting customer requirements. Should strictly adhere to EHS guidelines. He should be aware about the recent industry standards rules of safety, PTW, LOTO process, etc. and expert in preparing of EHS documents. Team Player, with a strong customer focus, Be flexible to take charge of assigned activities. Strong interpersonal and Communication Skills Self-motivated, quick learner and assertive Collaborative & well-coordinated. Job involves extensive travelling within India & Abroad. We don’t need superheroes, just super minds. Technical Qualification Diploma in Electrical Engineer with 12 to 14 years of experience or / Graduate Electrical Engineer from reputed Institute / university. (B. E / B. Tech) 8 to10 Years of experience in field of Power & HVDC transformer as well as Reactor. Familiar with MS Office (Word, Excel, PowerPoint, and Outlook) We’ve got quite a lot to offer. How about you This role is based in Hyderabad , where you’ll get the chance to work with teams impacting entire cities, countries – and the shape of things to come. We’re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow. Find out more about Siemens careers at:

Who We Are? Cleantech Industry Resources accelerates United States solar, battery storage and EV projects by providing turnkey development as a service including 100% internal systems engineering. The company deploys a leading team that spun out of the largest solar power producer in the world. This team operates within a sophisticated suite of software to support projects from land origination, through to commercial operation. Location of Position: Ahmedabad What We Offer Opportunity to join a top-notch, collaborative team of professionals Fantastic team environment and collaborative culture Professional development opportunities to grow into an industry leader Medical Insurance for the employee and family Spot Recognition bonus for exceptional performance Long Term Incentive policy Regular team outings, events, and activities to foster a positive work environment Our Commitment to Diversity At CIR, we are dedicated to nurturing a diverse and equitable workforce that truly reflects our community. We deeply value each person’s unique perspective, skills, and experiences. CIR embraces all individuals, regardless of race, religion, sexual orientation, gender identity, age, or nationality. We are steadfast in our commitment to fostering a just and inclusive world through intentional policies and actions. Your individuality enriches our collective strength, and we strive to ensure everyone feels respected, valued, and empowered. Position Summary The Substation Design Engineer would be involved in creating layout drawings and performing calculations for substation systems, including protection. This role includes preparing technical specifications and BoQs to meet client and international standards, defining the scope of work, and conducting grounding analysis. Responsibilities also cover reviewing equipment and protection/control designs and mentoring junior engineers. Desirable skills involve a professional license, advanced degree, knowledge of protection/control and related software, strong communication, analytical, and teamwork abilities, and proficiency in AutoCAD and MS Office, with the capacity to succeed in a fast-paced environment. Core Responsibilities Preparation of the general arrangement and elevation view, erection key diagram, trench plan, lightning protection layout, earthing layout, illumination layout, single line diagram, three-line diagram, protection line diagram, control building layout. Preparation of auxiliary load calculation, AC & DC cable sizing calculation and schedule, UPS, Battery and battery charger sizing calculation, Control cable schedule, direct stroke lightning protection calculation, earthing calculation, short circuit force and cantilever strength calculation. Preparation of Technical Specification of substation equipment. Preparation of detailed BoQ which meets the requirement of client, IEC, ANSI & IEEE. Preparation of Scope of Work Grounding analysis using software. Perform engineering calculation and report. Review and approval of all substations related equipment. Review and quality assurance of protection and control design drawings assuring both client and IEC, ANSI, and IEEE requirements are met. Provide leadership, training and mentoring to less experienced engineers and team members. Education Requirements A Bachelor’s degree in electrical engineering Knowledge of electrical substation equipment Familiarity with NEC, NFPA, IBC, IEC, IEEE, ANSI standards. Technical Skills and Experience Software Proficiency: Autodesk AutoCAD ETAP PSS/E PSCAD Project Management: Design experience in projects from conception to implementation. Ability to coordinate with other engineers and stakeholders. Renewable Energy Systems: Understanding of solar energy systems and their integration into existing infrastructure. Experience 2-3 years of experience design and engineering with power distribution and/or high voltage substations. Experience in Renewable (Wind, Solar & Energy Storage) will be considered as an asset. Experience on various substation projects from 69kV up to 345kV and/or a strong understanding of electrical distribution systems. Extensive experience with electrical substation design Psychosocial Skills /Human Skills/Behavioural Skills Strong analytical, organizational, and problem-solving skills. Project Management experience a plus. Entrepreneurial mindset with the ability to take ideas and run with them from concept to conclusion. Technical understanding of clean energy business processes Exceptional verbal and writing communication skills with superiors, peers, partners, and other stakeholders. Excellent interpersonal skills while managing multiple priorities in a fast-paced and ever-changing environment. Excellence in Microsoft Office (Word, Excel, PowerPoint) The candidate must have a strong command of the English language with good written and oral communication skills to work effectively with internal team members and external client personnel. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The physical demands of this job require an individual to be able to work at a computer for most of the day, be able to participate in conference calls and travel to team retreats on a time-to-time basis. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Conditions The work environment is usually quiet (normal city traffic noises are common), a blend of artificial and natural light, temperate and generally supports a collaborative work environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equal Opportunity Employer At Cleantech Industry Resources, we embrace diversity and uphold a strong dedication to establishing an all-encompassing atmosphere for both our staff and associates. Our choices in employment are free from any bias related to race, creed, nationality, ethnicity, gender, sexual orientation, gender identity, gender expression, age, physical limitations, veteran status, or any other legally safeguarded attributes. Being an integral part of Cleantech Industry Resources means you can expect to be immersed in a realm of professional possibilities within a culture that nurtures teamwork, adaptability, and the embracing of all.

K nows how to perform complex engineering analyses and develop complex deliverables within discipline A pplies standard engineering work planning, scheduling, and cost estimating U nderstands standard contract requirements and scope as they relate to discipline work K nows technical issues related to discipline and how to discuss with third parties (customer, suppliers, and regulators) K nows how to coordinate technical issues within discipline, with other disciplines, and with engineering staff U nderstands roles played by other departments on projects F amiliar with methods of procurement, including bid and evaluation process K nows electrical equipment and material K nowledgeable in the overall work requirements outside of the discipline. E xperienced with leading a group of engineers and/or designers within the discipline I n-depth knowledge of specific standards F amiliar with all WSP design guides and standards relevant to discipline U nderstands industry Norms and procedures C apable of analyzing and understanding Client’s requirements and standards. A bility to revise existing standards U nderstands EDP’s (Engineering Design Procedure) and their application on projects A bility to take a leading role and deliver quality results. A s a person, you are communicative, collaborative, and not afraid to take on difficult conversations. P roactive, result-oriented individual with excellent interpersonal and teamwork skills as well as reliability and ability to work under pressure. F luent spoken and written English. Dutch as an advantage. K ey Competencies / Skills P repare and review substation documentations, for example, protection diagrams, control and interlocking logics, AC and DC drawings, calculations, control and protection panel drawings, IED configurations, cabling and bills of materials. E xperienced with schematic drawings and identify or locate mistakes, problem solving and conflict resolution, proven technical report generation, communication, customer interface skills multi priority and multi-tasking. E xperienced with Calculations (CT/VT adequacy calculations, LV systems sizing and coordination studies, generator sizing, Battery and chargers sizing, LV cable sizing and voltage drop). E xperience working on protection philosophies. Basic knowledge of communication protocols like IEC61850, LON, IEC104, IEC101-3, DNP. E xperience in design software such as Elcad, AutoCAD. (ETAP, DigSILENT, PSCAD) is an advantage. E nsure that engineering is developed with complete information and/or that all multidisciplinary information has been included. L ead development of new solutions for complex projects and challenges. D rive completion of all secondary engineering activities on the project P repare project documents in your area of responsibility and deliver within budget, scope, and contract. E nsure adherence to safety standards and mitigation of potential risks. E nsure technical quality in contracts, other documents, and delivery D esired Skills K eep the WSP Lead Engineer, Project Manager regularly informed of technical activities, staffing, budgets and schedules E xplain reasons for actions taken to the work group B e approachable to members of the team M aintain harmony and a productive work atmosphere by being open about work activities and project status A bility to negotiate effectively with internal and external clients H as competence and confidence to make technical presentations L ead the work effort by defining the tasks and participating in their execution S upport the work with the appropriate staff and tools to complete the task C ommitted to supporting the group, superiors, subordinates, and colleagues professionally and personally D eliver superior quality designs and deliverables that meet the technical, schedule and budget requirements L ead subordinates in the continuous improvement in design and project execution C ontinuously seeks new efficient ways to perform tasks and to deliver quality work H as a strong desire to develop new technical capability P articipate in activities to stay abreast of the latest technology C ontinuously seeks new and efficient ways to perform tasks and to deliver high quality work P romotes team behaviour by keeping all informed about the technical and people developments in the work group E xhibit facilitation skills for problem solving by enlisting the support of the entire group L ead and coach design teams T rain and develop new team in new processes and procedures I mproves teamwork by sharing information and knowledge without reservation A ssigns and delegates tasks to qualified persons M akes timely decisions after obtaining input from others to maintain team progress R ecognizes contributions from others L ive the Leadership Covenants R ecognized degree in engineering or technical field from an accredited college or university and specialized courses in Electrical discipline plus applicable practical work experience. Minimum, Bachelor’s Degree in Electrical Engineering. 8 to 14 years of experience in Electrical Engineering W SP is one of the world's leading professional services consulting firms. We are dedicated to our local communities and propelled by international brainpower. We are technical experts and strategic advisors including engineers, technicians, scientists, architects, planners, surveyors and environmental specialists, as well as other design, program and construction management professionals. We design lasting solutions in the Transportation & Infrastructure, Property & Buildings, Earth & Environment, Power & Energy, Resources and Industry sectors, as well as offering strategic advisory services. Our talented people around the globe engineer projects that will help societies grow for lifetimes to come. W ith approximately 4 ,000 talented people a cross 3 locations (Noida, Bengaluru & Mumbai offices) in India and more than 7 3,000 globally , in 550 o ffices across 40 countries , we engineer projects that will help societies grow for lifetimes to come. A t “WSP” we draw on the diverse skills and capabilities of our employees globally to compete for the most exciting and complex projects across the world and bring the same level of expertise to our local communities. We are proud to be an international collective of innovative thinkers who work on the most complex problems. Unified under one strong brand, we use our local expertise, international reach and global scale to prepare our cities and environments for the future, connect communities and help societies thrive in built and natural ecosystems. True to our guiding principles, our business is built on four cornerstones: O ur People, Our Clients, Our Operational Excellence and Our Expertise. w ww.wsp.com W e are P assionate people doing purposeful and sustainable work that helps shape our communities and the future. A collaborative team that thrives on challenges and unconventional thinking. A network of experts channeling our curiosity into creating solutions for complex issues. I nspired by diversity, driven by inclusion, we work with passion and purpose. W orking with Us A t WSP, you can access our global scale, contribute to landmark projects and connect with the brightest minds in your field to do the best work of your life. You can embrace your curiosity in a culture that celebrates new ideas and diverse perspectives. You can experience a world of opportunity and the chance to shape a career as unique as you. O ur Hybrid Working Module W ith us, you can operate in a flexible, agile, yet structured work environment and follow a Hybrid Work Model. M aximize collaboration. M aintain product quality and cultural integrity. B alance community, collaboration, opportunity, productivity, and efficiency. H ealth, Safety and Wellbeing O ur people are our greatest asset, and we prioritize a safe work environment. Health, safety, and wellbeing are integral to our culture, with each of us accountable for fostering a safe workplace through our “Making Health and Safety Personal” initiative. Our Zero Harm Vision drives us to reduce risks through innovative solutions, earning recognition for our global health and safety practices with the prestigious RoSPA Health and Safety Awards for six consecutive years. I nclusivity and Diversity W SP India is dedicated to fostering a sustainable and inclusive work environment where our greatest strength - Our People -feel valued, respected, and supported. We ensure an unbiased approach in hiring, promotion, and performance evaluation, regardless of age, gender identity, race, religion, sexual orientation, marital status, physical ability, education, social status, or cultural background. I magine a better future for you and a better future for us all. J oin our close-knit community of over 73,300 talented global professionals dedicated to making a positive impact. Together, we can make a difference in communities both near and far. W ith us, you can. A pply today. N OTICE TO THIRD PARTY AGENCIES: W

Position Title: PSS/E & PSCAD Analyst Experience: 8 to 12 Years of relevant field experience. Location: Gurugram, India Job Overview: We are seeking a talented and motivated PSS/E & PSCAD Analyst to join our team. The success candidate will play a key role in the planning, design, and optimization of renewable energy projects using PSS/E (Power System Simulator for Engineering) and PSCAD (Power System Computer-Aided Design) software. This role will involve conducting detailed studies, simulations, and analysis to ensure the reliable and efficient operation of power systems, particularly focusing on the integration of renewable energy sources. Key Responsibilities: 1. Utilize PSS/E and PSCAD software to perform steady-state, transient stability, power quality, and dynamic simulations of power systems, with a focus on renewable energy integration as per CEA regulations/ IEC standards. 2. Conduct power flow analysis, fault studies, reactive power studies, and voltage stability assessments to optimize the performance of renewable energy projects. 3. Develop and validate models of renewable energy generators, including wind turbines, solar PV systems, and energy storage systems, within simulation project site environments. 4. Collaborate with engineering teams to design and implement grid integration solutions for renewable energy projects, considering grid codes and regulatory requirements. 5. Analyze and interpret simulation results to identify potential issues, recommend design improvements, and optimize the operation of power systems. 6. Provide technical expertise and support to project teams during the planning, development, and commissioning phases of renewable energy projects. 7. Stay updated on industry trends, emerging technologies, and best practices related to power system simulation and renewable energy integration. 8. Prepare technical reports, presentations, and documentation to communicate analysis findings and recommendations to stakeholders. Qualifications: - Bachelor’s or Master’s degree in electrical engineering or related field. - Strong proficiency in power system analysis and simulation software, including PSS/E and PSCAD. - Prior experience in renewable energy projects, especially within the Indian context, is strongly preferred. Additionally, candidates should have previous experience coordinating with RLDC/CTU/CEA for simulation reports and discussions. - Solid understanding of power system fundamentals, including generation, transmission, and distribution concepts. - Familiarity with grid codes, CEA standards, working group reports, and regulations governing the integration of renewable energy sources. - Excellent analytical skills and attention to detail, with the ability to interpret complex data and simulation results. - Effective communication skills, both verbal and written, with the ability to convey technical concepts to non-technical stakeholders. - Strong problem-solving abilities and the capacity to work independently as well as part of a multidisciplinary team.

University: Delft University of Technology (TU Delft) Country: Netherlands Deadline: 2025-08-01 Fields: Electrical Engineering, Power Systems, Power Electronics, Computer Science, Applied Mathematics Are you driven to contribute to the stability and reliability of tomorrow’s electrical power grids? Do you want to apply your expertise in power electronics, control systems, and advanced programming to solve real-world challenges at the forefront of the energy transition? If so, a remarkable postdoctoral opportunity awaits you at Delft University of Technology. About The University Or Research Institute Delft University of Technology (TU Delft), located in the Netherlands, is recognized globally for its excellence in engineering, science, and design. As the institution behind the world-renowned Dutch waterworks and a leader in biotechnology, TU Delft has a longstanding tradition of pioneering impactful research and innovation. The university is committed to addressing pressing societal challenges in energy, climate, mobility, health, and digital society, producing graduates and researchers who are entrepreneurial problem-solvers. Within TU Delft, the Faculty of Electrical Engineering, Mathematics, and Computer Science fosters an environment of interdisciplinary collaboration and innovation, making it an ideal setting for advanced research in intelligent electrical power grids. Research Topic and Significance The postdoctoral position is embedded within the MITIGATE-HARM project, which targets the critical issue of harmonics in power electronics-based power systems, particularly in multi-terminal high-voltage direct current (HVDC) grids. As the global energy landscape shifts toward renewable integration and more complex grid topologies, the stability, efficiency, and interoperability of hybrid power systems (HPS) have become paramount. Harmonics and resonances, often introduced by power electronic devices, can undermine system reliability and pose significant operational risks. This research aims to develop mathematical frameworks for identifying and mitigating such instabilities, ensuring the safe and stable operation of future power grids. The outcomes will directly inform the planning and design of next-generation HVDC grids, supporting the ongoing energy transition. Project Details This Is a 2–3 Year Postdoctoral Appointment, Anticipated To Start On December 1, 2025. The Successful Candidate Will Join The Intelligent Electrical Power Grids (IEPG) Group, Led By Prof. Dr. Peter Palensky, And Will Be Supervised By Dr. Aleksandra Lekić, Associate Professor. The IEPG Group Is Dedicated To Advancing The Future Of Electrical Power Systems Through Research On Reliability, Efficiency, Stability, And Smart Grid Controls. The MITIGATE-HARM Project, Conducted In Collaboration With Transmission System Operators (TSOs) And Academic Partners, Focuses On – Developing mathematical frameworks for identifying instabilities and resonances in hybrid power systems. – Proposing and evaluating mitigation measures to enhance wideband passivity and stability. – Implementing these solutions in C++ and integrating them into the Harmony toolbox (https://cresym.eu/harmony/). The research will involve both theoretical and practical aspects, including modeling, simulation, and software development, with the goal of enabling stable and efficient operation of advanced HVDC grids. Candidate Profile Ideal applicants for this postdoctoral position should possess the following qualifications and attributes: – A completed Ph.D. in a highly technical discipline such as electrical engineering, computer science, or a closely related field, with outstanding academic performance. – Deep knowledge of electrical power systems and power electronics, particularly in the context of power electronic devices, control, simulation, and modeling. – Demonstrated experience in modeling and simulation of power electronics-based power systems, including the identification and mitigation of resonances and instabilities. – Strong programming skills in C++ and MATLAB; familiarity with PSCAD simulation is considered an asset. – Excellent command of English in reading, writing, speaking, and listening. – Independence, self-motivation, and a strong eagerness to learn and collaborate with colleagues and external partners. – A passion for linking research to real-world challenges and contributing to the global energy transition. Application Process Are You Interested In This Vacancy? Please Apply No Later Than 1 August 2025 Via The Application Button And Upload The Following Documents – Your CV with a list of (academic and/or industry) references. – A list of grades of your qualifying degrees (BSc, MSc). – A cover letter with details about your motivation and compliance to the job requirements. More information and the application portal can be found at: https://careers.tudelft.nl/job/Delft-Postdoc-Mitigate-Harmonics-in-Power-Electronics-based-Power-Systems-2628-CD/825013002/ Conclusion This postdoctoral opportunity at TU Delft offers a unique platform for researchers eager to make a tangible impact on the future of power systems. If you are passionate about advancing the stability and intelligence of electrical grids and meet the outlined requirements, you are strongly encouraged to apply. Stay informed about similar academic and research positions by following updates in your field. Get the latest openings in your field and preferred country—straight to your email inbox. Sign up now for 14 days free: https://phdfinder.com/position-alert-service/ We’re an independent team helping students find opportunities. Found this opportunity helpful? Support us with a coffee! Also See PhD and Postdoctoral Opportunities in Polymer Science and Energy Systems at EPFL Postdoctoral Opportunity in Artificial Intelligence for Water Resources Management PhD Stipend in Modeling of Asynchronous Power Grids of the Future Fully-Funded PhD Position in Secure, Confidential, and Verifiable Cloud Storage at the… PhD Stipend in Modeling of Asynchronous Power Grids of the Future

Experience in Manage multiple projects and ensure design deliverables are delivered per approved budget/ schedule. Demonstrate an overriding commitment to health environmental responsibility. Ensure the deliverables meet the contractual requirements. Required Candidate profile Conversant with the International Engineering Codes and Standards such as API, BS, EN, IEC, IEEE, ISA, NACE, NFPA, etc. and Client Standards such as ANDOC, ARAMCO, BP, SHELL, etc.