619 Profibus Jobs - Page 24

Job Summary JOB DESCRIPTION If you are a DCS / Power Plant professional, Emerson has an exciting role for you! We are looking for a DCS Engineer to work with our Energetic Team. This role will work independently and as a part of a team to Commission a Power Plant, design, implement, simulate & test control and graphic on Emerson’s Ovation platform for various power plant applications. You will participate in Customer meetings, Site acceptance Tests, site commissioning and demonstrate DCS capabilities and final commissioning the EPC and end customers. If you think this role is suitable for you, let’s go and apply now! In This Role, Your Responsibilities Will Be: Field Services: Formation of Ovation structure / Architecture Ovation system loading and re-loading at site and network fixing. Locate, differentiate, and analyze the problems arising in design of logic, from field, hardware errors and DCS. Perform and Maintain protocols for loop check, device check and panel charging. Loop and device checking and vital modifications in the logics, graphics, and database as per Customer /site requirements DCS erection supervision and commissioning at site Establish DCS Network and configuration. Work closely with GEC and global Emerson support team for resolving. Trouble shooting of DCS HW (e.g. Controllers, I/O Modules, DBS, OWS, EWS etc.) Configuring and fixing Historian, AMS and Advanced Algorithms Perform third party communication e.g. ELC, SLC, Profibus, SCADA & OPC etc. Excellent knowledge on Power Plant Technology (Thermal, Combined Cycle) Exposure on Closed Loop Tuning in Thermal Power Plant Additional Responsibilities: Lead site activities independently, if required Participation in meetings with customer and front offices Prepare daily / weekly reports and MOM as required. Project Engineering: Design/Implementation of controls from SAMA /Functional diagrams. Implementation of graphics from sketches/snapshots Creation/modification of Ovation Internal Point Database Implementation of Simulation logics for First-Pass Test Virtual controller setup for testing purpose Testing of implemented controls and graphics & fixing during testing. Follow Department Quality processes and procedures. Scaling of Open loops & closed loops as per the ranges in the HW database Use various Efficiency tools such as DBID tool, Audit Tool, Database Efficiency Tool, etc. Conversion of controls and graphics of Third Party DCS/PLC systems to Ovation Support Factory Acceptance Test (FAT) activities! In-house Ovation Server/ Workstation loading Upgrade versions of ovation systems Who You Are: You pursue everything with energy, drive and the need to finish. You deliver messages in a clear, compelling, and concise manner and actively listens and checks for understanding. You lay out a detailed schedule and steps for achieving objectives and use landmarks to track and handle the progress of the work. For This Role, You Will Need: 4 years bachelor’s degree / Master’s Degree or equivalent experience in ECE, EEE, I&C, E&I. Proven experience of 2 to 5 years of in Power Plant process, project engineering and commissioning. Preferred Qualifications that Set You Apart: Excellent written and verbal communication skills. Problem-solving, decision-making, and planning skills. Ability to write reports, business correspondence and commissioning documents. Ability to effectively present information and respond to queries from management, clients and customers. Our Culture & Commitment to You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives—because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing competitive benefits plans, a variety of medical insurance plans, Employee Assistance Program, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. About Us WHY EMERSON Our Commitment to Our People At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world’s most complex problems — for our customers, our communities, and the planet. You’ll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you’ll see firsthand that our people are at the center of everything we do. So, let’s go. Let’s think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let’s go, together. Accessibility Assistance or Accommodation If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . About Emerson Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you’re an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you’ll find your chance to make a difference with Emerson. Join our team – let’s go! No calls or agencies please. Show more Show less

Role Overview At NeST Digital, we foster a dynamic environment where professionals can learn, grow, and innovate. We're currently seeking talented PLC developers to join programs driven by our Smart Technology Center in Trivandrum - to design and develop mission critical applications for the industrial manufacturing domain. This role involves writing efficient logic code, integrating systems, and ensuring the optimal performance of machines. The PLC Programmer will collaborate with cross functional engineering teams to troubleshoot issues, implement system improvements, and enhance automation efficiency. Their expertise is vital to improving production output and ensuring the reliability of automated systems. Responsibilities: ▪ Design and develop PLC, HMI programs for new Semi-Automatic systems ▪ Understand and maintain PLC, HMI programs of existing systems and implement enhancements ▪ Collaborate with Manufacturing and Mechanical/Electrical engineering, Components sourcing teams to identify new PLC components, Do PoC’s as part of it ▪ Provide training and support to staff on PLC systems and functionalities ▪ Create comprehensive documentation, including wiring diagrams, ladder logic, and I/O configurations, to support ongoing system management and troubleshooting. ▪ Travel to Contract Manufacturing site for installation and handover of systems Experience: ▪ At least 3-10 yrs years of Industry experience in PLC and HMI programming ▪ Experience in designing and integrating third party systems through interfaces and APIs Technical skills: • Strong proficiency in PLC programming, particularly with Delta, Mitsubishi, Omron, Keyence, Allen-Bradley, Beckoff or Schneider systems. • Strong knowledge of PLC programming languages (Ladder Logic, Structured Text, Function Block, etc.) and HMI design • Experience with real-time system debugging, control loop tuning, and signal processing. • In-depth understanding of industrial communication protocols (e.g., Modbus, Profibus, Ethernet/IP). • Ability to design and implement complex control architectures involving multiple PLCs, sensors, and actuators. • Experience integrating PLCs with robotics, motion control, and advanced HMI systems. • Familiarity with pneumatic and hydraulic control systems. • Knowledge of industry standards, such as IEC 61131-3, for PLC programming. • Any Certification in industrial automation or control systems Qualifications: • Bachelor's degree/ Diploma in Electrical Engineering , Automation, Mechatronics Work location: Kochi/Kalamassery NeST Hitech Park (Work from Office) Domain – Industrial – Hitech machinery Assembly and Test in Production lines Show more Show less

Job Summary: Navitus Controls & Equipment Private Limited (NCEPL ) is a niche service provider that delivers end-to-end automation solutions to various industrial verticals. NCEPL has partnered with leading manufacturers of Monitoring Devices, Communication Infrastructure Providers, and Analytical Software Providers to design and configure end-to-end solutions in the areas of "Condition Monitoring" of Electrical Assets that add value to our customer's businesses and help them move to " Condition-Based Maintenance Program " from an existing " Time-Based Maintenance Program." Our Top Clients are IOCL , NHPC , TATA STEEL, SCHNEIDER ELECTRIC, BHEL, NRL, ABB , Andritz Hydro, Kahramaa the state utility of Qatar and so many other organizations. We are dealing with 50 + leading clients and growing more than 20 % year on year for the last so many years. To support our growing business, we are looking for suitable skilled Instrumentation Engineer to join our team. The ideal candidate will be responsible for designing, developing, testing, and maintaining electronic and instrumentation systems used in manufacturing and industrial automation. Key Responsibilities: Design, develop, and implement instrumentation and control systems for manufacturing processes. Conduct testing, calibration, and troubleshooting of electronic circuits and control systems. Work with PLCs, SCADA, HMI, and other automation technologies to optimize manufacturing processes. Develop and maintain electrical and instrumentation schematics, wiring diagrams, and technical documentation. Ensure compliance with industry standards, safety regulations, and quality guidelines. Collaborate with cross-functional teams including production, maintenance, and R&D for system improvements. Support installation, commissioning, and maintenance of instrumentation and automation equipment. Analyze system performance and recommend enhancements for efficiency and reliability. Stay updated with the latest industry trends and emerging technologies in instrumentation and control systems. Qualifications and Skills: M.S.C in Instrumentation Science from any reputed Univercities or Organization. 5 Years of experience in industrial automation, control systems, or related domains. Proficiency in PLC programming (Siemens, Allen-Bradley, Mitsubishi, etc.), SCADA, and HMI development. Hands-on experience with sensors, actuators, transducers, and industrial communication protocols (MODBUS, PROFIBUS, etc.). Strong analytical and problem-solving skills with attention to detail. Ability to interpret and create electrical diagrams, P&ID, and control schematics. Knowledge of industrial safety standards and regulations. Excellent communication and teamwork skills. Preferred Skills: Experience in manufacturing environments, process control, and automation projects. Familiarity with embedded systems, microcontrollers, and IoT-based industrial solutions. Hands-on experience in data acquisition and control using LabVIEW, MATLAB, or Python. Certification in automation systems, control engineering, or industrial IoT is a plus. Why Join Us? Opportunity to work on cutting-edge industrial automation technologies. Career growth opportunities in a fast-growing Company Exposure to challenging projects in a dynamic and innovative environment. Competitive salary and benefits package like Incentives If you are passionate about electronics, instrumentation, and automation , we would love to hear from you! How to Apply: Interested candidates can send their resumes to sushmita@navituscontrols.com For any Further Knowledge you can visit our website - http://navituscontrols.com/ Job Type: Full-time Pay: ₹17,444.25 - ₹52,535.89 per month Benefits: Health insurance Leave encashment Provident Fund Schedule: Day shift Weekend availability Supplemental Pay: Performance bonus Experience: Automation: 5 years (Required) Total: 5 years (Required) Language: English (Preferred) Willingness to travel: 50% (Required) Work Location: In person Job Types: Full-time, Permanent Pay: ₹18,150.04 - ₹52,752.05 per month Benefits: Health insurance Leave encashment Life insurance Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Education: Master's (Required) Experience: Instrumentation : 5 years (Required) Location: Taratala, Kolkata, West Bengal (Preferred) Willingness to travel: 50% (Required) Work Location: In person

Job Title: PLC SCADA Engineer (Back Office – Automation) Company: Cotmac Electronics Pvt. Ltd. Location: Chandigarh NCR Experience Required: 2+ years Employment Type: Full-time Job Summary: Cotmac Electronics Pvt. Ltd. is looking for a PLC SCADA Engineer to support automation projects from a back-office environment. The ideal candidate will have experience in PLC programming , SCADA systems , and industrial communication protocols . Key Responsibilities: Develop and test PLC programs (Ladder Logic, Structured Text) Configure and maintain SCADA systems (WinCC, Wonderware) Work with automation protocols like Modbus, Profibus, and OPC Use SQL for data handling and reporting Support project documentation, simulation, and backend engineering tasks Key Skills: PLC Programming (Ladder Logic, Structured Text) SCADA Systems (WinCC, Wonderware) Modbus, Profibus, OPC SQL and database knowledge Qualifications: Bachelor's degree in Electrical/Electronics/Instrumentation Engineering Minimum 2 years of experience in industrial automation, preferably in a back-office or project support role Job Types: Full-time, Permanent Pay: Up to ₹75,000.00 per month Schedule: Morning shift Supplemental Pay: Performance bonus Yearly bonus Work Location: In person

Location – Mumbai, India Job Purpose The John Cockerill Group, a world leader in Green Hydrogen technologies has established itself as a reliable partner for all the stakeholders aiing to achieve Net zero emission targets. We are present across geographies and in all key energy markets. Our mission is to accelerate the transition to green hydrogen for a carbon-neutral world. We are a recognized leader globally for large-scale decarbonized hydrogen production solutions. To support the development of its Hydrogen Business Line, John Cockerill Hydrogen (JC H2) is looking for a Lead Automation Engineer (m/f) to be based in Mumbai India office. The Lead Automation Engineer is part of the EAI team, which includes people specialized in industrial electricity, power conversion, automation, and instrumentation, located all over the world in Hydrogen team (India, China, North America). She/He will be responsible to lead the automation design of domestic and international FEED & Details engineering projects. She/He will also be part of the development team of new product for the Hydrogen Business. Key Result Areas Based on requirement, build the best automation solution in term of reliability, scalability and cost efficiency. Write the specifications, participate in technical discussions with customer and suppliers Identify future solution, based on market evolution. Identify improvements and/or weaknesses. Follow-up new technologies and suppliers’ development to ensure the best technical and economic solution for each of our products. Key Responsibilities The Lead Automation engineer will be responsible for: Read and understand the customer' specifications and establish deviation list between John Cockerill usual solution and the request. Consider local regulations and the specific requirements. Initiate the basic design (control architecture, integrated control system philosophy, etc.) Define the preliminary purchase specification. Ensure boundaries of scope and interfaces with suppliers. Develop solution for PLC programming, configuration, and troubleshooting, starting with Tia Portal Siemens (from V18) to meet project requirements. Modify and enhance SCADA systems to improve functionality and performance. Integrate new features and modules into existing SCADA systems as per project specifications. Safety Compliance (ATEX): Ensure compliance with safety standards, particularly ATEX directives, in all automation projects. Implement safety measures and protocols to mitigate risks associated with hazardous environments. Understand and develop industrial network, in diverse communication protocols, such as Profibus, Profinet, Modbus, etc. Configure and troubleshoot communication networks to facilitate seamless data exchange between automation components. Develop the IO list relative to a projet; Ensure the implementation of robust cybersecurity measures to protect industrial automation systems from cyber threats. Ensure the follow-up of suppliers, including receipt of material Participate to FAT and SAT related to it's studies, based on checklists for verification of product conformity Engage in short-term assignments at John Cockerill Hydrogen offices, as well as international customer or supplier locations during studies. Develop engineering process and templates for the team. Interested and ensure the technological watch, be proactive in the continuous learning of Hydrogen sector Following topics are key advantages. Knowledge in electrical basic design or instrumentation design Experience in WinCC Unified Perform drive parameter tuning to optimize the performance of motor control systems. Troubleshoot and fine-tune drive parameters to achieve desired operational outcomes. Fine-tune control algorithms and parameters to ensure precise regulation and control of industrial processes. Analyze system performance data and adjust regulation and efficiency. Conduct on-site commissioning activities, including system testing, integration, and optimization. Collaborate with project teams to ensure successful installation and deployment of automation solutions at client sites. Education And Experience You have an engineering degree B.E. (Control/Automation/Instrumentation) field, You have minimum 15-18 years' experience in process design and engineering in an industrial environment Experience and knowledge in the Oil&Gas or Energy sector is an asset Being proficient in process control and P&ID understanding. Knowledge of the following standards, on top of electrical ones (IEC, NEC): Functional Safety Electromagnetic Compatibility Explosive Atmosphere API You have a strong and autonomous personality, an entrepreneurial mindset and a will to win You are able to prioritize and have an excellent sense of organization You are able to work in a team and take responsibility on several projects in parallel. You are adaptable and at ease with evolving in a continuously growing environment. You are fluent in English and French You are proficient in MS office, Teams, and SharePoint. Show more Show less

Job Title: PLC SCADA Trainer (6-Week College Training Program) Location: Ghaziabad, Uttar Pradesh Duration: 6 Weeks (Full-time/Part-time basis as per training schedule) Start Date: [Insert Start Date] Type: Contractual / Freelance Trainer Compensation: Competitive and negotiable based on experience About the Opportunity: We are seeking a passionate and experienced PLC SCADA Trainer to conduct a 6-week hands-on training program for engineering students at a reputed college in Ghaziabad . The program aims to equip students with industry-relevant skills in industrial automation, focusing on PLC programming and SCADA systems. Key Responsibilities: Design and deliver structured training modules on PLC (Programmable Logic Controller) and SCADA (Supervisory Control and Data Acquisition) systems. Conduct theory and practical sessions using simulation tools and real-time equipment (if available). Cover essential topics like: Introduction to Automation & PLC Basics Ladder Logic Programming PLC Hardware and Wiring SCADA Software Configuration Integration of PLC & SCADA Systems Industrial Communication Protocols (e.g., MODBUS, Profibus) Troubleshooting and real-world use cases Provide assignments, conduct assessments, and evaluate student progress. Offer career guidance and help students understand industry applications. Coordinate with college faculty and administration for smooth execution of the program. Qualifications & Skills: Bachelor’s degree in Electrical/Electronics/Instrumentation Engineering or a related field (Diploma holders with strong experience may also apply). Minimum 2-3 years of industry or training experience in PLC & SCADA systems. Hands-on experience with popular PLCs like Siemens, Allen Bradley, Mitsubishi, Delta, etc. Familiarity with SCADA software such as Wonderware, WinCC, iFIX, etc. Excellent communication and classroom management skills. Passion for teaching and mentoring students. Additional Information: College will provide training infrastructure support as needed. Trainers will receive a certificate of contribution upon successful completion. Travel and accommodation support may be provided if required. Job Types: Full-time, Contractual / Temporary Contract length: 6 weeks Pay: ₹5,000.00 - ₹15,000.00 per month Schedule: Day shift Monday to Friday Language: English (Preferred) Work Location: In person

Job Opportunity at Monk Automation Pvt. Ltd. About Us: Located in Nashik, Maharashtra, Monk Automation Pvt Ltd. is a leading manufacturing and supply company specializing in Electrical/Electronic Control Systems for machine and plant automation. As an authorized System Integrator for Schneider Electric India Pvt Ltd. and Parker Hannifin, we provide complete solutions for Process, Plant, and Machine automation. Our expertise spans PLC applications, Stepper/Servo Control, Positioning, SCADA & MIS Systems, and AC/DC Drives & Power Control. Job Title: Automation Engineer Location: Chennai Department: Project Reports To: Project Manager Employment Type: Full-time Job Summary: We are seeking a motivated and experienced Automation Engineer to join our team Candidates should have good knowledge in Project department in the field of control panel builder, electrical manufacturing industries. Technical knowledge of automation products like Control Panel ,PLC, drives, HMI & SCADA as well as systems. The ideal candidate should have a strong technical background in industrial automation / Control Panel Builder / Electrical /Electronic Products Sales, Services and Marketing. Key Responsibilities: Design, program, and commission automation control systems including PLCs, HMIs, SCADA, and industrial networks. Develop and optimize manufacturing and process automation solutions. Create detailed documentation including electrical schematics, wiring diagrams, and user manuals. Troubleshoot existing automation systems and implement necessary improvements. Collaborate with cross-functional teams including mechanical, electrical, and software engineers. Ensure compliance with relevant standards (e.g., IEC, ISO, safety regulations). Conduct FAT (Factory Acceptance Testing) and SAT (Site Acceptance Testing). Provide training and technical support to operators and maintenance personnel. Evaluate and recommend new automation technologies to enhance productivity and efficiency. Qualifications: Bachelor’s degree in Electrical Engineering, Electronics, Mechatronics, Instrumentation, or related field. Proven experience (2–5 years) in automation engineering or control systems integration. Proficiency with PLC platforms (e.g., Siemens, Allen-Bradley, Schneider Electric, Mitsubishi). Experience with SCADA/HMI software Familiarity with industrial communication protocols (e.g., Modbus, Profibus, Ethernet/IP). Knowledge of electrical control panel design and safety systems. Strong analytical and problem-solving skills. Ability to manage multiple projects and meet deadlines. Other Requirements: Willingness to work extended hours if necessary. · Candidate should know Hindi/ English Traveling PAN India Level as per site requirement. · BOND 2 Lacs of amount for 3 Years is mandatory. Candidate those who are ready to work in bond can only apply. Job Types: Full-time, Permanent Pay: From ₹2,250,000.00 per year Benefits: Cell phone reimbursement Commuter assistance Internet reimbursement Leave encashment Life insurance Paid sick time Paid time off Provident Fund Schedule: Day shift Fixed shift Monday to Friday Morning shift Weekend availability Supplemental Pay: Yearly bonus Experience: INDUSTRIAL AUTOMATION: 1 year (Required) License/Certification: ELECTRICAL,EEE,ECE,MECHTRONICS (Required) Location: Chennai, Tamil Nadu (Preferred) Work Location: In person Application Deadline: 23/06/2025

ZETATEK OPEN POSITION Job Title Electrical Design Manager Number 1 of Positions Experience Level 4-6 years Educational Bachelor’s Degree in EEE and ECE and Instrumentation or any other equivalent qualification Qualifications Location Hyderabad, Telangana, India. Position Type Permanent. Mandatory Skills Extensive experience in Electrical Designs Involve in Designs reviewing and finalization. Guide and assist departments to design and develop products as per the project requirements. Selection of electrical components and instruments as per the project requirement. Example: Electrical components: Contactors, MCB/MPCB/BCCB/RCCB, timers, Relays, size of the wires etc. Instrumentation Components: Process instruments, Sensors, Actuators, Data loggers, Recorders, PLCs, HMIs etc. Design process charts and implementing the same. Design verifications / debugging / design validation to be done to satisfy the end user requirements. Fundamental knowledge in ISO, IEC and CE norms including EMI/EMC. Good experience in selection of various sensors, Actuators and instrumentation depending on the project requirement. Good Hands on experience in handling third party process instruments and integration between Process instruments / PLCs / HMIs without compromising the project requirement. Sound Knowledge in selection, configuration and integration of different process controllers. Example: Eurotherm, Watlow, Yokogawa, Ascon etc Sound Knowledge in PLC programming, to handle all kind of PLCs available in the market. Example: Siemens, Phoenix, Allenbradly etc. Sound Knowledge in HMI configuration including writing macros as per the project requirements and create User friendly Graphical user interface (GUI). Example: Weintek, Maple, ESA etc. Good Knowledge in Electrical drafting software like Ecad, AutoCAD , Elecworks(Solidworks) etc. Knowledge in different industrial protocols like MODBUS, Profibus etc. Good understanding of basic concepts of electronics and electrical engineering. Knowledge of different wiring techniques, soldering techniques is essential. Must have exceptional Troubleshooting skills Knowledge in Mechanical components, their working and functionality. Liaises with other departments to ensure that the required information is available when needed and customer requests are dealt with in a timely manner Understanding software structures and coding languages. Soft Skills Good Communication skills(English fluency is a must) Leadership Teamwork Interpersonal skills Ability to work in fast-paced, high-pressure environment Focused on results Mindful of deadlines ZETATEK OPEN POSITION About Our Group Zetatek Technologies Private Limited is based out of Hyderabad began operations in 90’s and has in the last three decades established an impeccable reputation as a market leader in the niche segment of Environment simulation, Temperature chamber, Humidity Chambers, Altitude chambers, CATH Chambers (Combined Altitude temperature & humidity chamber)” Environmental stress screening chambers. Etc., An affiliate company of this group is a credible name in the field of motion simulation and its product range includes Rate Tables, Centrifuges and other related products. An, another affiliate Company is into Electro-Optical Tracking Systems (EOTS) and Hardware-In- Loop Simulators (HILS). Apart from manufacturing, we are also the authorized sales and service representative for several companies across the world. Website:www.zetatek.in and www.motiondynamic.com. Job Type: Full-time Pay: ₹20,000.00 - ₹30,000.00 per month Schedule: Day shift Ability to commute/relocate: Hyderabad, Telangana: Reliably commute or planning to relocate before starting work (Required) Experience: total work: 1 year (Required)

Company Description Rotork is the market-leading global flow control and instrumentation company, helping our customers manage the flow or liquids, gases and powders across many industries worldwide. Our purpose is Keeping the World Flowing for Future Generations. Job Description Responsibilities: Execute verification and validation test on embedded product. Report bugs identified in bug reporting tools. Perform exploratory tests to gather data around the bugs identified. Active participation in bug resolution process. Reporting the test coverage gaps in reference to product requirements Technical skills: Knowledge in Test Stand software to create test cases/scripts. Exposure to automated/manual testing environment based on LabVIEW. Sound knowledge on SDLC, STLC, Bug resolution process. Hands on experience handling lab equipment like multimeter, loop calibrators, Digital storage oscilloscopes Knowledge on Industrial network protocols like CAN, Modbus, Profibus etc is preferred. Knowledge on LabVIEW is preferred. Soft skills: Good analytical and problem-solving skills. Good command in English language to converse to native speakers on day-to-day basis. Qualifications Bachelor’s degree in electrical/Electronics/Instrumentation/Mechatronics Engineering. 2 to 5 years of working knowledge in embedded testing domain

Job Description Job Title: Automation Engineer – Siemens PLC (S7-1500) Experience Level: 4–6 Years Location: [Your Company Location] Department: Automation / Engineering Employment Type: Full-time Job Summary We are seeking a skilled and motivated Automation Engineer with 4–6 years of hands-on experience in Siemens PLC programming , particularly with the S7-1500 series . The ideal candidate will be responsible for developing, testing, commissioning, and supporting PLC-based automation systems across industrial applications. This role involves both on-site and off-site work with cross-functional teams to ensure smooth automation processes. Key Responsibilities Design, develop, and maintain automation solutions using Siemens S7-1500 PLCs. Create and modify PLC programs using TIA Portal. Perform system testing, simulation, and validation of PLC logic. Handle troubleshooting and debugging of existing PLC programs and hardware systems. Collaborate with cross-functional teams (Electrical, Mechanical, and Production) to integrate automation solutions. Prepare documentation for control systems including IO lists, wiring diagrams, and logic descriptions. Participate in FAT/SAT, system commissioning, and provide technical support during project execution. Ensure compliance with industry standards and safety regulations. Train and mentor junior engineers or technicians when required. Required Skills & Qualifications Bachelor’s degree or diploma in Electrical / Electronics / Instrumentation / Mechatronics Engineering. 4–6 years of experience in industrial automation and control systems. Strong proficiency in Siemens PLCs, especially S7-1500 and TIA Portal. Good understanding of SCADA/HMI systems (preferably Siemens WinCC). Experience in troubleshooting field equipment and control systems. Solid knowledge of industrial communication protocols (e.g., Profinet, Profibus). Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Preferred Qualifications (Nice To Have) Experience in industries like Automotive, Pharma, FMCG, or Process industries. Familiarity with VFDs, Servo systems, and industrial sensors. Knowledge of safety PLCs and standards (e.g., SIL, IEC 61508). Requirements Automation Engineer – Plc Programming, Siemens PLC (S7-1500) Show more Show less

Job Description Summary All resources, and logistics required to perform services and maintenance activities on customer’s site/ property. These activities contribute to, maintain, repair and refurbish sold or existing products. Includes all types of maintenance service (preventive and remedial), manage maintenance facilities and field services engineering. This role will require frequent traveling up to 100 % to various client sites throughout India. Job Description Essential Responsibilities Commissioning of PLC/SCADA/HMI Programming & Commissioning Control Systems in marine, Mining, CRM/ HSM metal or Oil and gas plant Commissioning in Perform IPMS system installation check as per test procedures. Experience in Propulsion & Manoeuvring, Automatic power Management system, Auxiliary control system, Battle damage control system, On board training system, Equipment health Monitoring system, CCTV, Personal location system and Integrated bridge system and 3rd party systems. Scheduling and coordinating work to tight deadlines Creating and carrying out test procedures Ensuring site safety norms Coordinating with installation/project engineers/Project Managers Site report preparation, planning and execution Needs to work closely with the global project team. Investigating technical problems, diagnosing/repairing faults Troubleshooting Service support Qualifications/Requirements Bachelor's degree from an accredited university or college B.E / M.E or equivalent / Electrical/Electronic engineering – Minimum 3 years’ experience DEEE- Minimum 5 years’ experience Should have process knowledge of Metal / Marine / oil and gas commissioning. Independent performance trials experience for the process plant PLC, Scada, HMI Interfacing and Automation Communication network skills – Profibus/Modbus/Ethernet Desired Characteristics Strong oral and written communication skills. Strong interpersonal and leadership skills. Ability to work independently. Strong problem-solving skills. Operational & process skills in the Metal / Marine / oil and gas domain Additional Information Relocation Assistance Provided: Yes Show more Show less

Job Title Control Project Engineer Job Description Trainee Engineer will be involved in engineering, Commissioning of PLC/ASRS/Loopsorter Systems and field wiring for projects in material handling (Airports, Warehousing and Parcel). He will be part of on-site commissioning. Interact with Electrical Engineering, Mechanical Engineering, Software Engineering, Site Installation team, R&D team, Project leader engineering to ensure proper engineering & commissioning of material handling systems. Core Task Trouble shoot PLC/ASRS/Loopsorter cabinet & field wiring on site. Able to read & understand electrical layouts in Auto-cad software. Selection and ordering of electrical components. Perform Cabinet FAT, SAT, ISAT & various test using (e.g., Megger, HV test). Configure hardware, Frequency drives and perform I/O test on site. Test and supervise installation of electrical components and handover system commissioning. Is able to work height. Willing to travel extensively (80%) and be able to work in multicultural environment. Skill Set Knowledge of electrical / electronic equipment (e.g. Motor, drives, sensors, electrical protection). Basic knowledge of Power, Control systems. Basic knowledge of industrial automation with PLC. Basic knowledge of field bus (e.g., Profibus, Profinet, Asi-bus). Basic knowledge of communication protocols (e.g. Modbus, TCP/IP) Soft Skills Excellent communication skills. Problem solving and critical thinking. Right attitude for learning Flexibility and adaptability. Pro-active and self-motivator. Willing to travel extensively and be able to work in multicultural environment. Qualification B.E. / B. Tech (Electricals /Electronics / Instrumentation) with minimum Aggregate of 60% Marks Show more Show less

Field Service Engineer At ABB, we are dedicated to addressing global challenges. Our core values: care, courage, curiosity, and collaboration - combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to empower everyone to create sustainable solutions. Write the next chapter of your ABB story. This position reports to Service Manager Your role and responsibilities In this role, you will have the opportunity to execute service work with low to medium complexity as per work instructions and in accordance with ABB standard processes, quality standards, and safety guidelines. Each day, you will plan and execute work on a first-time right approach with customers. Your responsibilities will include demonstrating a solid grasp of priorities and attentiveness within your designated duties. The work model for the role is: - Onsite This role is contributing to the Process Automation – Energy division in India region. You will be mainly accountable for: Delivered on-site and remote service support for ABB 800xA Automation Systems in the Oil & Gas industry, including troubleshooting, issue resolution, and field service of medium to high complexity. Identified technical issues and improvement opportunities during customer interactions, resulting in root cause analysis and recommending corrective and preventive actions. Supported brownfield service bids by providing technical authority and solutioning support during the proposal phase, including customer presentations. Ensured service readiness by preparing material lists and coordinating the availability and quality of parts, tools, and equipment. Promoted a culture of continuous improvement by documenting best practices, tracking site issues, and implementing improvements to enhance field service quality and profitability. Maintained high standards of safety and customer communication, ensuring safe execution of work and consistently improving customer satisfaction. Qualifications for the role Have 5–10 years of practical experience in service engineering for ABB Symphony or 800xA systems in the Oil & Gas sector. A solid foundation in process control and instrumentation within diverse processing facilities, showcasing skills in DCS hardware and application engineering, HMI design, library creation, third-party communication, testing, and commissioning. Extensive experience with ABB System 800xA for at least 2 years; familiarity with other ABB systems like Freelance, and communication protocols such as Profibus, Modbus, and OPC would be beneficial. Skilled in executing brownfield DCS projects including application modifications, retrofits, controller migrations, and on-site commissioning. Exposure to cybersecurity solutions, virtualization, and digital technologies. Full-time diploma or degree holder in Electrical, Electronics, or Instrumentation Engineering; capable of effective communication in English (written and verbal). More about us We value people from different backgrounds. Apply today for your next career step within ABB and visit www.abb.com to learn about the impact of our solutions across the globe. #MyABBStory The Energy Industries Division serves a wide range of industrial sectors, including hydrocarbons, chemicals, pharmaceuticals, power generation and water. With its integrated solutions that automate, digitalize and electrify operations, the Division is committed to supporting traditional industries in their efforts to decarbonize. The Division also supports the development, integration and scaling up of new and renewable energy models. The Division’s goal is to help customers adapt and succeed in the rapidly changing global energy transition. Harnessing data, machine learning and artificial intelligence (AI), the Division brings over 50 years of domain expertise delivering solutions designed to improve energy, process and production efficiency, as well as reduce risk, operational cost and capital cost, while minimizing waste for customers, from project start-up and throughout the entire plant lifecycle. It has come to our attention that the name of ABB is being used for asking candidates to make payments for job opportunities (interviews, offers). Please be advised that ABB makes no such requests. All our open positions are made available on our career portal for all fitting the criteria to apply. ABB does not charge any fee whatsoever for recruitment process. Please do not make payments to any individuals / entities in connection to recruitment with ABB, even if is claimed that the money is refundable. ABB is not liable for such transactions. For current open positions you can visit our career website https://global.abb/group/en/careers and apply. Please refer to detailed recruitment fraud caution notice using the link https://global.abb/group/en/careers/how-to-apply/fraud-warning. Show more Show less

Position Summary Job title: IoT/OT Cybersecurity - Consultant About At Deloitte, we do not offer you just a job, but a career in the highly sought-after risk Management field. We are one of the business leaders in the risk market. We work with a vision to make the world more prosperous, trustworthy, and safe. Deloitte’s clients, primarily based outside of India, are large, complex organizations that constantly evolve and innovate to build better products and services. In the process, they encounter various risks and the work we do to help them address these risks is increasingly important to their success—and to the strength of the economy and public security. By joining us, you will get to work with diverse teams of professionals who design, manage, and implement risk-centric solutions across a variety of domains. In the process, you will gain exposure to the risk-centric challenges faced in today’s world by organizations across a range of industry sectors and become subject matter experts in those areas. Our Risk and Financial Advisory services professionals help organizations effectively navigate business risks and opportunities—from strategic, reputation, and financial risks to operational, cyber, and regulatory risks—to gain competitive advantage. We apply our experience in ongoing business operations and corporate lifecycle events to help clients become stronger and more resilient. Our market-leading teams help clients embrace complexity to accelerate performance, disrupt through innovation, and lead in their industries. We use cutting-edge technology like AI/ML techniques, analytics, and RPA to solve Deloitte’s clients ‘most complex issues. Working in Risk and Financial Advisory at Deloitte US-India offices has the power to redefine your ambitions. The Team Cyber & Strategic Risk We help organizations create a cyber-minded culture, reimagine risk to uncover strategic opportunities, and become faster, more innovative, and more resilient in the face of ever-changing threats. We provide intelligence and acuity that dynamically reframes risk, transcending a manual, reactive paradigm. The cyber risk services—Identity & access management (IAM) practice helps organizations in designing, developing, and implementing industry-leading IAM solutions to protect their information and confidential data, as well as help them build their businesses and supporting technologies to be more secure, vigilant, and resilient. The IAM team delivers service to clients through following key areas: User provisioning Access certification Access management and federation Entitlements management Work you’ll do Roles & Responsibilities: Consulting and Advisory Provide expert guidance on cybersecurity strategies and best practices for deployment of cybersecurity safeguards IoT and OT environments. Conduct OT risk assessments and recommend mitigation strategies including identification of vulnerabilities, threats and consequences on OT systems. Advise clients on regulatory and compliance requirements related to IoT and OT security. Develop and implement tailored cybersecurity frameworks and policies. Collaborate with clients to design secure IoT and OT architectures. Technical Implementation Deploy, configure and manage cybersecurity solutions within OT environments such as Claroty, Nozomi, Palo Alto IoT Security, Tenable.OT, Dragos Implement network segmentation and access control measures ensuring Safety, Reliability and Productivity of operations. Build sandbox or lab environments at client sites to enable testing of OT cybersecurity solutions and patches Conduct vulnerability assessments on IoT and OT devices leveraging network and device scanning solutions Practice Development Stay current with the latest cybersecurity trends, threats, and technologies. Conduct research on emerging IoT and OT security challenges and solutions. Develop innovative approaches to address complex security issues in IoT and OT environments. Contribute to the development of whitepapers, articles, and thought leadership materials. Required Skills Understanding of: IoT and OT protocols: OPC UA, Modbus, Profibus, Profinet, DNP3, MQTT, Zigbee etc. Industrial Network Architectures: ZTNA, Purdue Model, Software Defined Network SegmentaExperience in deployment or operations of at-least one of the following solutions: OT Security Monitoring: Claroty, Nozomi, Defender for IoT, Cisco Cyber Vision, Dragos, Palo Alto IoT Security, Tenable.OT etc. Knowledge of regulatory and compliance frameworks such as ISA/IEC 62443, NIST 800-82, NOG 104 Qualification Bachelor's or Master's degree in Computer Science, Information Security, or a related field. Preferred specialization in Cyber Physical Systems (CPS) or IoT Security 4+ years of experience in cybersecurity, with a focus on IoT and OT environments. Proven track record of successfully securing IoT and OT systems for large organizations. Relevant certifications such as CISSP, CISM, CEH, or equivalent. Great to have IoT/OT certifications such as GICSP, GRIP or ISA 62443 How You’ll Grow At Deloitte, we’ve invested a great deal to create a rich environment in which our professionals can grow. We want all our people to develop in their own way, playing to their own strengths as they hone their leadership skills. And, as a part of our efforts, we provide our professionals with a variety of learning and networking opportunities—including exposure to leaders, sponsors, coaches, and challenging assignments—to help accelerate their careers along the way. No two people learn in the same way. So, we provide a range of resources including live classrooms, team-based learning, and eLearning. DU: The Leadership Center in India, our state-of-the-art, world-class learning Center in the Hyderabad offices is an extension of the Deloitte University (DU) in Westlake, Texas, and represents a tangible symbol of our commitment to our people’s growth and development. Explore DU: The Leadership Center in India . Deloitte’s culture Our positive and supportive culture encourages our people to do their best work every day. We celebrate individuals by recognizing their uniqueness and offering them the flexibility to make daily choices that can help them to be healthy, centered, confident, and aware. Deloitte is committed to achieving diversity within its workforce, and encourages all qualified applicants to apply, irrespective of gender, age, sexual orientation, disability, culture, religious and ethnic background. We offer well-being programs and are continuously looking for new ways to maintain a culture that is inclusive, invites authenticity, leverages our diversity, and where our people excel and lead healthy, happy lives. Learn more about Life at Deloitte. Corporate citizenship Deloitte is led by a purpose: to make an impact that matters. This purpose defines who we are and extends to relationships with Deloitte’s clients, our people and our communities. We believe that business has the power to inspire and transform. We focus on education, giving, skill-based volunteerism, and leadership to help drive positive social impact in our communities. Learn more about Deloitte’s impact on the world. Recruiting tips Finding the right job and preparing for the recruitment process can be tricky. Check out tips from our Deloitte recruiting professionals to set yourself up for success. Check out recruiting tips from Deloitte recruiters . Benefits We believe that to be an undisputed leader in professional services, we should equip you with the resources that can make a positive impact on your well-being journey. Our vision is to create a leadership culture focused on the development and well-being of our people. Here are some of our benefits and programs to support you and your family’s well-being needs. Eligibility requirements may be based on role, tenure, type of employment and/ or other criteria. Learn more about what working at Deloitte can mean for you . Our people and culture Our people and our culture make Deloitte a place where leaders thrive. Get an inside look at the rich diversity of background, education, and experiences of our people. What impact will you make? Check out our professionals’ career journeys and be inspired by their stories. Professional development You want to make an impact. And we want you to make it. We can help you do that by providing you the culture, training, resources, and opportunities to help you grow and succeed as a professional. Learn more about our commitment to developing our people . © 2024. See Terms of Use for more information. Deloitte refers to one or more of Deloitte Touche Tohmatsu Limited, a UK private company limited by guarantee ("DTTL"), its network of member firms, and their related entities. DTTL and each of its member firms are legally separate and independent entities. DTTL (also referred to as "Deloitte Global") does not provide services to clients. In the United States, Deloitte refers to one or more of the US member firms of DTTL, their related entities that operate using the "Deloitte" name in the United States and their respective affiliates. Certain services may not be available to attest clients under the rules and regulations of public accounting. Please see www.deloitte.com/about to learn more about our global network of member firms. Recruiting tips From developing a stand out resume to putting your best foot forward in the interview, we want you to feel prepared and confident as you explore opportunities at Deloitte. Check out recruiting tips from Deloitte recruiters. Benefits At Deloitte, we know that great people make a great organization. We value our people and offer employees a broad range of benefits. Learn more about what working at Deloitte can mean for you. Our people and culture Our inclusive culture empowers our people to be who they are, contribute their unique perspectives, and make a difference individually and collectively. It enables us to leverage different ideas and perspectives, and bring more creativity and innovation to help solve our clients' most complex challenges. This makes Deloitte one of the most rewarding places to work. Our purpose Deloitte’s purpose is to make an impact that matters for our people, clients, and communities. At Deloitte, purpose is synonymous with how we work every day. It defines who we are. Our purpose comes through in our work with clients that enables impact and value in their organizations, as well as through our own investments, commitments, and actions across areas that help drive positive outcomes for our communities. Professional development From entry-level employees to senior leaders, we believe there’s always room to learn. We offer opportunities to build new skills, take on leadership opportunities and connect and grow through mentorship. From on-the-job learning experiences to formal development programs, our professionals have a variety of opportunities to continue to grow throughout their career. Requisition code: 203678 Show more Show less

Job Summary JOB DESCRIPTION The successful candidate in the Product Engineering team will be responsible for designing, implementing, and testing firmware for industrial actuators. Our mission is to deliver highly reliable products to the market, which is what Emerson is known for and what our customers expect. To support our mission, this role requires for rapid familiarization with our embedded products, product design, and technological needs. A strong exposure to Embedded Product Development Life Cycle processes, tools & methodologies is crucial to ensure process driven product development. In this Role, Your Responsibilities Will Be: Maintain and update existing firmware to ensure efficient performance and reliability. Identify and resolve firmware issues reported by customers or identified through internal testing. Design, implement, and enhance firmware for industrial actuators. Analyzing, and optimizing firmware performance. Participation in code reviews to ensure code quality and maintainability. Solving and performing Root Cause Analysis of the issues. Alignment to standard processes for code development, reuse, and portability. Maintain documentation, bug tracking, and records related to the software development. Comprehend technical requirements, collaborate with technical leads and other specialists to develop solutions that meet Emerson's quality standards. Who You Are: You are adaptable and embrace new challenges without overplanning. Your can-do attitude shines in all situations and you optimally communicate in various settings. You are also quick to adapt to new technologies. You anticipate the impact of new technologies and adapt accordingly. For This Role, You Will Need: Bachelor’s degree or equivalent experience in Electronics Engineering, Electrical, or related field. Experience working in 16/32-bit Microcontrollers/Microprocessors. Proficiency in programming languages such as C/C++ for embedded systems. Experience with implementing industrial protocols such as HART, Modbus, Profibus, etc. Low level firmware development for peripherals like Ethernet/USB/I2C/SPI/UART/Display etc. Experience developing firmware based on RTOS. Familiarity with hardware design and debugging. Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a team. Excellent communication and interpersonal skills to collaborate with global teams. Preferred Qualifications that Set You Apart: Master’s degree or equivalent experience in electronics engineering, Electrical, or related field. Experience with firmware development tools and IDEs (e.g., Keil, IAR Embedded Workbench). Communication Protocols –Bluetooth, Modbus TCP/IP, Ethernet/IP will be advantageous. Experience working in a global engineering environment. Knowledge of Agile development methodologies. Working experience in developing product with Cybersecurity as per IEC62443 Prior experience in the industrial automation or control systems industry. Our Culture & Commitment to You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives—because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing competitive benefits plans, a variety of medical insurance plans, Employee Assistance Program, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. About Us WHY EMERSON Our Commitment to Our People At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world’s most complex problems — for our customers, our communities, and the planet. You’ll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you’ll see firsthand that our people are at the center of everything we do. So, let’s go. Let’s think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let’s go, together. Accessibility Assistance or Accommodation If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . About Emerson Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you’re an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you’ll find your chance to make a difference with Emerson. Join our team – let’s go! No calls or agencies please. Show more Show less

About OMRON Founded in 1933, OMRON has come a long way since and has evolved to become an organization committed to creating new social values. Today, In the APAC region, OMRON has a strong presence in Industrial Automation, Healthcare, and Device & Module Solutions. Let’s begin the exciting journey of Shaping Future 2030 together with us! About OMRON Industrial Automation Business Come join our Industrial Automation team, who is striving to create social value - “Improve manufacturing that supports a sustainable society”- the business has the industry’s most extensive portfolio comprising sensors, controllers, motors, robotics, vision, and safety solutions. Understand more about our Industrial Automation Business HERE. Join OMRON Talent Community Don't find this job opening relevant? Shape-up your future with us and be a part of OMRON’s growing family. To get job opportunity alerts, register yourself and submit your resume to our talent community network HERE Short Description Job Responsibilities Pre Sales (30%) 1.1 Work closely with internal and external customers to understand their machine automation needs and provide an optimized solution 1.2.Consultation and support on technically demanding applications in the production area. 1.3.Develop custom motion demos and demonstrate proof-of-concept (POC) Technical Support and Reporting (40%) 2.1 Provide high level applications support on technical issues at customer’s site as required 2.2 Identify root cause of hardware and software issues by analysing data 2.3 Support the setup, management, and tear down of equipment at trade shows and road shows 2.4 Provide feedback to Global team on our products such as reporting bugs/issues, making suggestions for enhancements or new products. 2.5 Execute the troubleshooting (software, mechanical & Electrical) for controller troubleshooting issues and maintain the documentation of troubleshooting procedures. 2.6 Timely submission of monthly reports, success stories ATC (Automation Centre) Enhancement and support: (30%) 3.1 Conduct OJT (On the Job Training) for internal and external stakeholders and maintain the training documentation. 3.2 Participate and contribute to innovative application-level projects including features for improving machine automation products 3.3 Preparation and support to conduct and manage customer presentations at ATC. 3.4 Support to upkeep and enhance motion controller setup and lab at ATC. 3.5 Explore ODT product’s features / functions and share the technical notes across the team members Job Requirements B.E./B.Tech./M.Tech. (Any) Minimum 6 to 10 years of experience of machine automation application programming & Commissioning. Knowledge of motion drives and controller added advantage. Project handling experience Proficient in Machine Automation Systems including controllers, software, and servo drives Hands-on experience in C programming and strong knowledge of structured text programming are mandatory. Programming knowledge with C/C++/Java, VB.NET/C#.NET/Python, etc. will be an added advantage Knowledge of Industrial protocols like EtherCAT, EtherNET/IP, PROFIBUS, etc. and production-related protocols likeModbus, OPC-UA, MQTT, TSN, etc. Knowledge on Kinematics of special purpose machine will be added advantage Travel as and when required Disclaimer The Job Description has been designed to indicate the general nature and essential duties and responsibilities of work performed by job holders within this classification. It may not contain a comprehensive inventory of all duties, responsibilities, and qualifications required of employees to do this job. Duties may be subject to periodic review by the HR, immediate supervisor or nominated representative (in consultation with the job holder) to reflect the changing work composition of the business. Why Join us OMRON’s mission is to improve lives and contribute to a better society. We endeavor to make our diverse workforce feel equally valued and enjoy equal opportunities to help us achieve so. So come, work with the best of the best teams, collaborate, and innovate together with diverse, capable minds across the globe. Show more Show less

Field Service Engineer At ABB, we are dedicated to addressing global challenges. Our core values: care, courage, curiosity, and collaboration - combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to empower everyone to create sustainable solutions. Write the next chapter of your ABB story. This position reports to Service Manager Your role and responsibilities In this role, you will have the opportunity to execute service work with low to medium complexity as per work instructions and in accordance with ABB standard processes, quality standards, and safety guidelines. Each day, you will plan and execute work on a first-time right approach with customers. You will also showcase your expertise by displaying a clear understanding of sense of urgency and care in your own area of responsibility. The work model for the role is: - Onsite This role is contributing to the Process Automation – Energy division in India region. You will be mainly accountable for: Delivered on-site and remote service support for ABB 800xA Automation Systems in the Oil, Gas & Chemical industry, including troubleshooting, issue resolution, and field service of medium to high complexity. Identified technical issues and improvement opportunities during customer interactions, driving root cause analysis and recommending corrective and preventive actions. Supported brownfield service bids by providing technical authority and solutioning support during the proposal phase, including customer presentations. Ensured service readiness by preparing material lists and coordinating the availability and quality of parts, tools, and equipment. Promoted a culture of continuous improvement by documenting best practices, tracking site issues, and implementing improvements to enhance field service quality and profitability. Maintained high standards of safety and customer communication, ensuring safe execution of work and consistently improving customer satisfaction. Qualifications for the role Possess 5–10 years of hands-on experience in service engineering for ABB Symphony or 800xA systems within the Oil, Gas & Chemical industry. Strong background in process control and instrumentation across various process plants, with expertise in DCS hardware & application engineering, HMI, library development, third-party communication, testing, and commissioning. Proven experience in ABB System 800xA (minimum 2 years); knowledge of other ABB systems like Freelance, and communication protocols such as Profibus, Modbus, and OPC is a plus. Skilled in executing brownfield DCS projects including application modifications, retrofits, controller migrations, and on-site commissioning. Exposure to cybersecurity solutions, virtualization, and digital technologies is advantageous. Full-time diploma or degree holder in Electrical, Electronics, or Instrumentation Engineering; capable of effective communication in English (written and verbal). Will be based at a customer site in Gujarat, handling service activities across two plant locations situated 120 km apart. More about us We value people from different backgrounds. Apply today for your next career step within ABB and visit www.abb.com to learn about the impact of our solutions across the globe. #MyABBStory The Energy Industries Division serves a wide range of industrial sectors, including hydrocarbons, chemicals, pharmaceuticals, power generation and water. With its integrated solutions that automate, digitalize and electrify operations, the Division is committed to supporting traditional industries in their efforts to decarbonize. The Division also supports the development, integration and scaling up of new and renewable energy models. The Division’s goal is to help customers adapt and succeed in the rapidly changing global energy transition. Harnessing data, machine learning and artificial intelligence (AI), the Division brings over 50 years of domain expertise delivering solutions designed to improve energy, process and production efficiency, as well as reduce risk, operational cost and capital cost, while minimizing waste for customers, from project start-up and throughout the entire plant lifecycle. Show more Show less

< Back to Career Preferred Industry Experienc e: Industrial Automation / Special Purpose Machine (SPM) / Machine Building Qualification: Dip / BE: EEE / Mechatronics Opportunities Group: 5yrs to 9yrs Number of open positions: 2 Work Location: Pune Key Tasks And Responsibilities Understand the customer requirements in detail Detailed project design with functional, interface and hardware specifications Planning and Implementation of projects from concept to design, programming and deployment Selection of field instruments and control devices Evaluation of P&ID and functional design specification Development of functional blocks and programming of Siemens S7-200/ S7-1200/S7-300/ S7-1500/ S7-400 PLCs, Wincc and HMI software’s Commissioning of AC Drives, DC Drives, & Servo Drives Programming and configuration of various industrial communication protocols such as Profinet, Profibus, Ethernet IP , Modbus etc. Conducting FAT and Testing of Control Panels prior to dispatch Developing and implementing new standards and engineering practices in the work Apply Show more Show less

Job Title Controls Project Engineer I Job Description Department The Engineering Support Office (ESO) is responsible for standardizing products and developing the necessary tooling to support platform solution . ESO collaborates closely with the Project Engineering and R&D teams to ensure seamless integration and continuous improvement. Job Responsibilities & Core Tasks Understand and implement control architecture for industrial automation systems. Develop standard libraries, project-specific solutions, and tooling for automated material handling systems. Create architecture design documents for software solutions. Test and validate product libraries and project-specific software to ensure reliability and performance. Analyze Problem Reports (PRs) and Change Requests (CRs), implement resolutions, and update the standard library accordingly. Facilitate knowledge transfer to other engineers. Drive improvements in content, processes, and tooling. Incorporate lessons learned from projects into product, process, and tooling enhancements. Assist the R&D team in testing, verifying, and rolling out product libraries. Support and maintain tooling infrastructure essential for product development. Job Skills / Functional / Technical Skills PLC & Automation Systems Proficient in Siemens PLC programming (S7-1500 series is mandatory; S7-300/400 series is optional). Strong expertise in PLC programming languages (SCL & STL are mandatory). Knowledge of Allen-Bradley PLC platforms is an added advantage. Experience in developing safety systems using platforms like Siemens Safety PLCs. SCADA & IT Systems Hands-on experience with SCADA applications (WinCC, WebFactory, etc.). Electro-Mechanical & Field Technologies Understanding of electro-mechanical components, control cabinets, and field wiring. Proficiency in fieldbus technologies such as Profibus, Profinet, AS-I, and CC-Link Ethernet. Testing & Quality Assurance Experience with testing tools like Quality Center and Requirement Management tools (e.g., DOORS). Strong knowledge of material handling and industrial automation systems. Personal Attributes & Soft Skills Strong communication skills. Proactive and takes initiative. Creative and innovative mindset. Disciplined and well-organized. Team player, with a collaborative attitude. Results-oriented with a strong drive for success. Analytical thinker, with problem-solving abilities. Qualification B.E. / B.Tech in Electrical, Electronics, or Instrumentation Engineering from a recognized university/institution. Experience 5 to 8 years of relevant experience, preferably in logistics process automation using Siemens PLC platforms. Show more Show less

Job Title Specialist Software Engineer Job Description Position Name Specialist Software Engineer – R&D team Our Company Vanderlande is the global leader for value-added logistic process automation at airports and in the parcel market, as well as a leading supplier of process automation solutions for warehouses. In this world of technology, we believe in people – especially those who are totally dedicated, customer-driven and keen to continue learning throughout their career. www.vanderlande.com Your department Research and Development India (R&D India) is an extended arm of R&D Netherlands and plays a key role in the continuous investment in new products and technologies to strengthen our position and differentiate our products. Software has become an integral part of our products and systems therefore we invest in people to create the most added value! Your Responsibilities As a Specialist Software development, you will create the design to ensure the requirements are taken care of along with platform modularization, ensure the reusability, dive into defining technical requirements and development in-line with requirements and architecture. Ensure complex scenarios of flexible control system and support our engineers on site with advice and solutions. Together with them, you will make sure the systems keep on performing for decades. Beside that, you will make sure the system performs on new industrial control hardware. During this process you will analyze risks, solve problems, decompose bottlenecks, test and generate recommendations for improvements. As an experienced software engineer, you will be actively involved in team effort through different development stages. In this challenging role, you will be widely involved in all kind of design, development and support activities. Your Qualifications And Skills If you’re an experienced, enthusiastic and versatile software engineer BE. / B. Tech/ M.E / M. Tech (Any Discipline) degree from a recognized University / Institution. You have at least 12-15 years of relevant working experience, preferably on embedded or firmware development. Hands-on experience of 10+ years in Software Development in C/C++, linux. Works closely with global stream architect, product owner and scrum master. Prolific programmer and an expert code reviewer against the architecture, coding guidelines, code documentation and optimization. Experience in soft and/or hard real-time operating systems Linux is must. Knowledge of object-oriented design. Industrial Automation background using Siemens IPC, industrial networks like OPC UA, OPC DA, Profinet, Profibus, ASi experience is a big plus. Knowledge of Software Configuration Management (based on Bitbucket) is a plus. Background in using development environments, services and tools (Jira, Bitbucket, Bamboo). Experience in soft and/or hard real-time operating systems, preferably Linux debian. Experience in Agile way of working is a plus. Personal Profile Good command over English. Agile mindset / team player. Soft skills essential for R&D job Taking Initiative, Creativity, Cooperation, Learning Ability, Advising, Systemic Thinking, Analyzing & listening. Not afraid to take responsibility in a dynamic working environment Drive to win, result and goal-oriented attitude You like challenges and love puzzles Show more Show less

Job Description Summary Become part of a winning team and help to deliver the Green Energy transition Job Description Systems engineering is a cross-functional engineering discipline centred on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Roles And Responsibilities Lead the configuration of IEC61850 IED’s via vendor specific tools and System Configuration Tools for complete system integration. Lead the generation of Substation Configuration description Language (SCL) files for system integration. Knowledge of interlocking principles used in substation automation systems and their implementation on IEC61850 IED’s. Lead the design, configuration and testing required to deliver on time and within defined budgets the HVDC Control System hardware. Lead the testing and debugging of complex IEC61850 communication systems using industry standard tools such as IEDSCout, Wireshark etc. Coordinate and interface the HVDC Control System with Balance of Plant equipment and SCADA systems: Define the main IO Lists of the control system Analyze signal interfaces and ensure compatibility with the control system Lead in collaboration with NPI teams, the configuration of Remote Terminal Units (RTU), Bay Controllers (BCU) and Merging Units for signal acquisition in digital substation environments. Lead the design of LAN networks/Communication Architectures and configuration of industrial ethernet switches/routers and satellite clocks Follow the departments standard design practices, engineering reviews and guidelines. Define Control Panel requirements and produce detailed design documentation for the control system using standard design blocks under the guidance of lead engineers. This may include Panel Electrical Schematics (using Engineering Base tool) Wire/Cable Schedules Routine Test specification General Assembly drawings Bill of Materials Oversee the testing and FAT witnessing of the Control System. Prepare and present technical information for Substation Control Systems to internal and external customers. Assist site activities relevant to the installation and commissioning of the control system. Share engineering information and promote open dialogue. Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Required Qualifications Degree in Electronics/Electrical engineering or related field. Strong background in configuring Substation Bay Controllers/Merging Units/ IEC61850 IED’s Experience in Control Panel design (preferably as used in substation/power plant environments) Strong background in Distributed Control Systems / Substation Automation Experience in working with engineering tools such as AutoCAD, e-base, Microsoft Visio Knowledge of industrial communication networks such as Profibus and Ethernet based protocols. Understanding of fibre optic cabling systems Understanding of LV cable sizing and distribution Control & Protection Relay logics Design techniques Experienced in developing electrical designs for industrial control systems. Desired Characteristics Strong oral and written communication skills. Demonstrated ability to analyze and resolve problems. Ability to document, plan, market, and execute programs. Established project management skills. The North Europe Grid System Integration (GSI) team delivers a wide range of turnkey high voltage AC and DC transmission projects to its Customers in the UK, Ireland, and Scandinavia. Grid Solutions, a GE Vernova business, serves customers globally with over 20,000 employees. We provide power utilities and industries worldwide with equipment, systems and services to bring power reliably and efficiently from the point of generation to end power consumers. Grid Solutions is focused on addressing the challenges of the energy transition by enabling the safe and reliable connection of renewable and distributed energy resources to the grid. We electrify the world with advanced grid technologies and accelerate the energy transition. About GE Grid Solutions At GE Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. Why We Come To Work At GE Renewable Energy, our engineers are always up for the challenge - and we’re always driven to find the best solution. Our projects are unique and interesting, and you’ll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you’ll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. What We Offer A key role in a dynamic, international working environment with a large degree of flexibility of work agreements Competitive benefits, and great development opportunities - including private health insurance. Additional Information Relocation Assistance Provided: Yes Show more Show less

Job Description Summary As a member of Engineering Team, you will be responsible for technical excellence in Board design & development and owns complete product design cycle by conceptualization, detail design, simulations, design calculations and prototyping of the electronic boards as products for Steam Power. Job Description Roles & Responsibilities: Design & Build prototype of Electronic Boards meeting Hardware (Internal & Interface) & software requirements as per Steam Power product needs like controllers for ESP, Boiler, Turbine and Generators by actively involving in all phases of product development life cycle Lead R&D projects and team for developing AQCS and Boiler controllers Prepare requirement/concept specification, test plan, test reports and other documents Perform lab and field testing for evaluation of new concepts Handling EMI / EMC design issues, High-speed digital design layout issues, placement and routing topology Software programming using Embedded C/ C++ on Linux platforms Analysis of firmware and algorithm requirements Support to Engineering & Tender team as per requirement. Support to standardization/cost out efforts and Ensure continual product improvement Implement global standards and common processes to assure consistent quality is delivered. Communicate project status, schedules, upcoming deliverable, and technical solutions between various teams. Method of communications to include, but not limited to, model reviews, design review, construct ability & accessibility reviews, team meetings, etc. Concurrently work on multiple products and ensure program cost, quality and schedule requirements are met. Qualifications / Requirements Bachelor’s Degree (BE/B.Tech) in Electronics & Communication, Electronics & Instrumentation Engineering with excellent academic track record Minimum experience of 8 years of Hardware design (controls system components) used in Industries preferably Power Plants/Oil & Gas/ Petro- Chemical Plants Minimum experience of 2 years of Embedded software development. Eligibility Requirements Ability to travel 30% of the time, as required Industrial experience in Board design and development and has participated in full product design cycle Proven expertise in conceptualization, detail design, basic simulations, design calculations and prototyping Experience on microcontroller, DSP, FPGA/CPLD based hardware design, analogue & digital circuit Experience on Schematic design, simulation & layout using Orcad / Altium Hands on experience in using testing & debugging tools like emulators, DSO, Logic Analyzer, function generator etc. for board bring-up Experience in Industrial Product Certification (UL, CE, CISPR standards) Comfortable in protocols like RS232/485, i2C, SPI, Modbus TCP, Fieldbus, CAN, Profibus, USB Demonstrated interpersonal and leadership skills, ability to interface effectively with global counterparts Excellent verbal and written communication skills. Desired Characteristics Master's degree from an accredited university or college Proven experience working in global engineering/ R&D teams. Knowledge & working experience on Coal Fired & Gas Fired Boilers & Air Quality Control Systems like ESP, Fabric Filters. Ability to balance multiple priorities and execute multiple projects at a time. Ability to influence others and supervise small teams. Lead initiatives of moderate scope and impact. Effective problem identification and solution skills. Proven analytical and organizational ability. Additional Information Relocation Assistance Provided: Yes Show more Show less

Job Title Senior Site Supervisor Job Description Your department Site management is responsible of providing complete project execution support through project life cycle globally. Vanderlande is the global market leader in baggage handling systems for airports, and sorting systems for parcel and postal services. The company is also a leading supplier of warehouse automation solutions. With a consistently increasing order intake of more than 2.8 billion euros, it has established a global reputation over the past six decades as a highly reliable partner for value-added automated material handling solutions. We are looking for a Site Supervisor/ Site Manager for Global projects. You will be part of the team that Lead and Support project execution across the Globe. Your position As a Site Supervisor your role is to lead the site execution work and supervise multiple Site Supervisors (Mechanical/ Electrical) and multiple teams of contractors for mechanical and electrical work. And, in parallel, he will work with the project, procurement, Safety, Engineering, and Field Quality team for better Planning, Site Procurements, Safety Implementation, Engineering changes, and to maintain Vanderlande's standard of execution. Job Description Supervision of the Mechanical, electrical and control installation, guide, and train in Electro-Mechanical installation teams. Inspect and diagnose complex mechanical/electrical systems Interpret engineering drawings in reference to layout, location, and operation of the system(s). Should have hand on experience with AutoCAD, Navis and E. Plan drawing. Should possess conceptual knowledge of PLC systems (Siemens), different type of hardware’s, Communication protocols (Profinet, Ethernet, Profibus, ASI). Should have knowledge of different types of Switch gears, Drives and RLC circuits. Should have knowledge of I/O testing. Support the commissioning, testing and integration of material handling system Managing the quality inspections for the installed equipment with focus on the electrical installation. You ensure in close coordination with our engineers that the equipment is installed in accordance with the specification. Support for the site handover and conduct surveys for installation areas. Aware of our contract and responsibilities and identify deviations. Reporting progress to the site manager and project manager. Join progress meetings Responsible for the electrical and control installation progress on site and ensure to meet the program milestones Responsible for the site safety and quality of the installed electrical and control equipment Responsible for daily, weekly, and monthly installation reports and toolbox talk with supervisor team. Cooperate with your project manager in the establishment of policies and procedures related to Field Support Desired profile Bachelor's degree in electrical/ Mechanical engineering, mechatronics. 10 to 11 years’ experience in handling WS/ Parcel or Airport system. Experience of different type of sorters (Line/Loop Sorters) are preferable. General PLC programming or troubleshooting certification. Safety certification line IOSH, Emergency preparedness training. Travel Need to Travel 70% or more. Base Location Pune India. Mandatory Skills Leadership and presentation skills including relentless problem solving, results orientation Should have positive approach, right attitude etc. Ability to effectively lead and work under pressure, Ability to work constructively with all stakeholders, building both internal and external relationships. Proficiency in the application of computerized systems, including standard business applications (i.e., MS Office) Effective verbal and written communications skills Negotiation skill and commercial experience to manage contract scope changes directly with clients, suppliers. Demonstrated organizational skills, and company ethics. Strong bias for following processes and continual process improvement. Strong sense of time urgency for critical-path project items, milestones, and key project deliverables Show more Show less

1. Engineer qualifications Diploma / BE, B-tech in Electrical Engineering or Electronics engineering 2. The candidate must be expert in commissioning, trouble shooting on Simocode, soft starter & other LV communication capable products. 3. Engineer must be willing to travel extensively for service sites. 4. Must be expert in commissioning of Simocode on various communication protocol. 5. Must have elementary knowledge on network validation, Profibus and Modbus protocols and its routing. 6. Must be having 3-4 years of experience of Service experience on EP products. 7. Should be expert in ACB servicing & troubleshooting. 8. To provide service support to customer at a short notice & ensure customer delight. 9. Handling of service business portfolios (Service contract, retrofit, spare parts, repairs) 10. Monitoring of Service KPIs. 11. To provide lead generation to service sales team for business growth. 12. To monitor and take actions on AMCs, open calls, escalated cases, service business targets. 13. Engineer may have to work in shifts during site execution jobs. 14. Compliance to EHS and statutory requirements during site execution.

Role & responsibilities Understanding project requirements and completing all duties assigned by the Supervisor. Participating in meetings and attending workshops and other training initiatives Should design, implement, and test a wide range of I/O (HART, Modbus, FF, Profibus etc.), basic control functions, interlocks, sequences, operator interface and other control components on DCS and PLC. Documenting the project control and safety functions, presenting them to the customer and get approval. Preparing simulations, test scenarios, test documentation, and participates in customer Factory Acceptance Tests. Actively participates in project meetings, discussion with customers, visiting sites and supporting commissioning activities Should be able to troubleshoot the control and communication problems between different systems during FAT and at site. Compiles and maintains project databases, configuration data, or other project information. Compiles data and prepares reports for various activities such as customer proposals, FEED studies, project design documents, FAT and SAT procedures etc. Shall be capable to identify technical opportunities and economic justification for control system improvements and communicates those to the Project Manager and/or Sales Preferred candidate profile Bachelors Degree in Electronics & Instrumentation Engineering, Control & Instrumentation Engineering Should have minimum 65% of Marks or 6.5 CGPA