316 Profibus Jobs - Page 12

Job Description and Responsibilities: Job requirements: Should have the basic understanding of programmable logic controllers, distributed control systems, Safety systems, Fire Gas systems, IIoT and Industry 4.0 Should aware of industry standards and practices (e.g., ISA standards) that apply to control system design. Should have firm and increasing understanding of process control concepts and techniques. Should understand networking devices components like ethernet switches, Fiber optic switches, firewalls etc., Should understand the various industrial communication protocols like Modbus, Profibus, HART, FF etc., Strong analytical and mathematical skills Strong written and verbal communication skills Attitude to work effectively as an individual in team environment and shall be able to handle multiple projects simultaneously. A growth mindset and a commitment to lifelong learning willingness to accept criticism Willing to travel for site commissioning activities depending upon the project requirements Maintaining a high degree of professionalism and diligence. Job responsibilities: Understanding project requirements and completing all duties assigned by the Supervisor. Participating in meetings and attending workshops and other training initiatives Should design, implement, and test a wide range of I/O (HART, Modbus, FF, Profibus etc.), basic control functions, interlocks, sequences, operator interface and other control components on DCS and PLC. Documenting the project control and safety functions, presenting them to the customer and get approval. Preparing simulations, test scenarios, test documentation, and participates in customer Factory Acceptance Tests. Actively participates in project meetings, discussion with customers, visiting sites and supporting commissioning activities. Should be able to troubleshoot the control and communication problems between different systems during FAT and at site. Compiles and maintains project databases, configuration data, or other project information. Compiles data and prepares reports for various activities such as customer proposals, FEED studies, project design documents, FAT and SAT procedures etc. Shall be capable to identify technical opportunities and economic justification for control system improvements and communicates those to the Project Manager and/or Sales Educational Qualification: Must be a Graduate in Engineering Disciplines Electroni

Job Description and Responsibilities: Job requirements: Should have the basic understanding of programmable logic controllers, distributed control systems, Safety systems, Fire Gas systems, IIoT and Industry 4.0 Should aware of industry standards and practices (e.g., ISA standards) that apply to control system design. Should have firm and increasing understanding of process control concepts and techniques. Should understand networking devices components like ethernet switches, Fiber optic switches, firewalls etc., Should understand the various industrial communication protocols like Modbus, Profibus, HART, FF etc., Strong analytical and mathematical skills Strong written and verbal communication skills Attitude to work effectively as an individual in team environment and shall be able to handle multiple projects simultaneously. A growth mindset and a commitment to lifelong learning willingness to accept criticism Willing to travel for site commissioning activities depending upon the project requirements Maintaining a high degree of professionalism and diligence Job responsibilities: Understanding project requirements and completing all duties assigned by the Supervisor. Participating in meetings and attending workshops and other training initiatives Should design, implement, and test a wide range of I/O (HART, Modbus, FF, Profibus etc.), basic control functions, interlocks, sequences, operator interface and other control components on DCS and PLC. Documenting the project control and safety functions, presenting them to the customer and get approval. Preparing simulations, test scenarios, test documentation, and participates in customer Factory Acceptance Tests. Actively participates in project meetings, discussion with customers, visiting sites and supporting commissioning activities. Should be able to troubleshoot the control and communication problems between different systems during FAT and at site. Compiles and maintains project databases, configuration data, or other project information. Compiles data and prepares reports for various activities such as customer proposals, FEED studies, project design documents, FAT and SAT procedures etc. Shall be capable to identify technical opportunities and economic justification for control system improvements and communicates those to the Project Manager and/or Sales Educational Qualification: Must be a Graduate in Engineering Disciplines Electronics & Instrumentation Engineering, I

Write Python script that formulate test case to run on Robot framework. inte gration testing means and verification tests (continuous integration, non-regression, performance, endurance) using the different available means: automatic test benches, and simulation tools on the laboratorys automatic test bench. Establish an inventory of the existing bench, complete the existing documentation. Define the specifications for the new test benches. Set up the bench equipment (Software Verification Platform) in India. Replay existing tests and obtain similar results. Backup and format the results of the test campaigns. Verify the adequacy of the test means with the new test plans. Adapt the test means to verify cybersecurity features in drive products. Collaborate with the RD and VV teams in Pacy-sur-Eure. Challenge the integration test and verification test specifications provided. Ensure the compatibility of the different test benches. Analyze the results to provide consolidated and relevant information. Ensure the maintenance and availability of the test benches. Participate in activities related to continuous improvement, Identify improvement opportunities. Ensure the capitalization of knowledge and know-how and identify opportunities for valorization. Interact with other entities external to Schneider Electric. Deliverables: Establish an inventory of the existing bench. Define the specifications for the new test benches. Acceptance testing of the new test benches. Progress report on the production of test platforms at other sites. Capitalization of test campaign results. Technical Environments: Test Framework: Robot Framework Language: Python 3 Configuration Management: Git Ticketing: Jira Scheduling Servers: Jenkins Project Tracking Methods: Agile / Scrum Communication Protocols: EIP / Modbus / CANOpen / Profibus, Profisafe, TCP/IP, etc. BE/B.tech Computer Science or Electrical Engineering with min 3 years of experience .

Job Description and Responsibilities: Job requirements: Should have the basic understanding of programmable logic controllers, distributed control systems, Safety systems, Fire Gas systems, IIoT and Industry 4.0 Should aware of industry standards and practices (e.g., ISA standards) that apply to control system design. Should have firm and increasing understanding of process control concepts and techniques. Should understand networking devices components like ethernet switches, Fiber optic switches, firewalls etc., Should understand the various industrial communication protocols like Modbus, Profibus, HART, FF etc., Strong analytical and mathematical skills Strong written and verbal communication skills Attitude to work effectively as an individual in team environment and shall be able to handle multiple projects simultaneously. A growth mindset and a commitment to lifelong learning willingness to accept criticism Willing to travel for site commissioning activities depending upon the project requirements Maintaining a high degree of professionalism and diligence Job responsibilities: Understanding project requirements and completing all duties assigned by the Supervisor. Participating in meetings and attending workshops and other training initiatives Should design, implement, and test a wide range of I/O (HART, Modbus, FF, Profibus etc.), basic control functions, interlocks, sequences, operator interface and other control components on DCS and PLC. Documenting the project control and safety functions, presenting them to the customer and get approval. Preparing simulations, test scenarios, test documentation, and participates in customer Factory Acceptance Tests. Actively participates in project meetings, discussion with customers, visiting sites and supporting commissioning activities. Should be able to troubleshoot the control and communication problems between different systems during FAT and at site. Compiles and maintains project databases, configuration data, or other project information. Compiles data and prepares reports for various activities such as customer proposals, FEED studies, project design documents, FAT and SAT procedures etc. Shall be capable to identify technical opportunities and economic justification for control system improvements and communicates those to the Project Manager and/or Sales Educational Qualification: Must be a Graduate in Engineering Disciplines Electronics & Instrumentation Engineering, Instrumentatio

Job requirements: Should have the basic understanding of programmable logic controllers, distributed control systems, Safety systems, Fire Gas systems, IIoT and Industry 4.0 Should aware of industry standards and practices (e.g., ISA standards) that apply to control system design. Should have firm and increasing understanding of process control concepts and techniques. Should understand networking devices components like ethernet switches, Fiber optic switches, firewalls etc., Should understand the various industrial communication protocols like Modbus, Profibus, HART, FF etc., Strong analytical and mathematical skills Strong written and verbal communication skills Attitude to work effectively as an individual in team environment and shall be able to handle multiple projects simultaneously. A growth mindset and a commitment to lifelong learning willingness to accept criticism Willing to travel for site commissioning activities depending upon the project requirements Maintaining a high degree of professionalism and diligence Job responsibilities: Understanding project requirements and completing all duties assigned by the Supervisor. Participating in meetings and attending workshops and other training initiatives Should design, implement, and test a wide range of I/O (HART, Modbus, FF, Profibus etc.), basic control functions, interlocks, sequences, operator interface and other control components on DCS and PLC. Documenting the project control and safety functions, presenting them to the customer and get approval. Preparing simulations, test scenarios, test documentation, and participates in customer Factory Acceptance Tests. Actively participates in project meetings, discussion with customers, visiting sites and supporting commissioning activities. Should be able to troubleshoot the control and communication problems between different systems during FAT and at site. Compiles and maintains project databases, configuration data, or other project information. Compiles data and prepares reports for various activities such as customer proposals, FEED studies, project design documents, FAT and SAT procedures etc. Shall be capable to identify technical opportunities and economic justification for control system improvements and communicates those to the Project Manager and/or Sales. Educational Qualification: Must be a Graduate in Engineering Disciplines Electronics & Instrumentation En

Hands on experience of Pythons, Json and port programming skills. Server & client servers programming skills for live data streaming & data ingestion. experience on IoT devices, controllers like edge devices, cloud connectors & MQTT brokers.

The role of PLC Programmer is to keep PLC standards in plants. Secure effective update and create new PLC programing for projects. Make a change in PLC programs for reaching expected levels of connectivity with DMC and another MP X.0 tools. Cooperation on all equipment PLC programming in case of needs. Validate and maintain critical spares related to PLC Will be able to retrofit the latest PLC and create program logic on old machines. Equipment connectivity: Follow up yearly budgeted planning, support plant team during implementation, provide all necessary documents related with PLC equipment changes. Actively work on projects changes according to plan created by MES/Data Tools Leader. PLC programs storage: Responsibility for all PLC changes, share back up programs on specific share point, to be available in case of lost data. Owner of PLCs programs library. Contribute on new DT: Cooperation with Division, plants and BG/GIT members. Participation on workshops to define new concepts and use cases in plants. Follow up planning of MES/Data Leader and Project Leader. Continuous improvement process: Participate on the Improvement Ideas process according to defined rules and targets. Coordinate and / or participate on QRCI (8D Problem Solving) in all levels. People Management - Should have leadership skills to handle team of 8-10 peoples. Train, coach, and develop Maintenance Team. Support and train other networks/functions. Your profile and competencies to succeed The ideal candidate will have/be: Minimum education level Diploma/ BE/ B tech (Mechanical/Electrical/ Electronics/ Mechatronics) preferably in Electronics Experience: o Experience in PLC 6-8 years required. Skills and competencies o International mind set. o Leadership skills o Experience Siemens in TIA Portal, Step 7 minimum (PLC and HMI) o Allen Bradley & Mitsubishi PLC knowledge will be added advantage o Skills in profinet/profibus network and proface, read technical and electric documentation and HW devices overview (motors, sensors, scanners etc.) o Knowledge in IT (SCADA system) o Knowledge of the OPC tools - Kepware o Be able to do standard blocks in PLC software. o Overview about Digitalization tools and 4.0 Industry experiences o Hands on and result oriented (very pragmatic) o Fluent in English

Ability to perform all duties of a technician and work independently on standard and non-standard task. Relies on experience and judgment to plan work and achieve goals. Coaches UAP team to improve polyvalence and establish TPM culture My machine, I operate , I maintain . A certain degree of creativity and latitude is required The main missions of the role are: Attend Daily Top 5 Meeting Function in the assembly production area. Can able to plan & Schedule Preventive/ Predictive/ TBM/ CBM/ Chance maintenance of Robot / welding equipment s ( Mig / Tig welding/ Spot) , Utilities. Responsible for critical spares identification and management. Responsible for PLC programming , modification & debugging the faults Knowledge about robot installation , commissioning , programming , interlocking through PLC ( Yasaka motoman DX-100/ 200 & fanuc 120iC). Digital communication protocol knowledge like Device net, Profibus, Profinet , Serial port to debug PLC communication fault Responsible for FES implementation Chapter 11 ( Equipment care) To maintain and adhere to 5S requirements in Utilities area. Work in shift to attend breakdown, Root cause analysis and counter measure. Responsible for EMS & OHSAS related documentation Authorized license to work in HT/ LT line/ Transformer etc. Your profile and competencies to succeed Qualifications The ideal candidate will have/be: Minimum education level o Diploma/ BE/ B tech (Electrical/Mechanical/ Electronics/ Mechatronics) with additonal experience. Experience : o Significant Maintenance experience 3 to 5 years Minimum (BE/Diploma Electrical/Electronics) Skills and competencies o Team player with strong organisation and communication skills o International mind set o English required

Automation Engineer Name:Automation EngineerRole:Automation EngineerIndustry:Wireless TelecomLocation:Hazira,Surat (Gujarat)Job Type:Full TimeExperience:2- 5yearsSkills:Automation PLC,Relay, isolators, industrial protocol TCP IP, Ethernet IP, stocker reclaimer, maintenance etc.Salary:Best in the industryEducation:BTech/ Diploma (E & TC/ Electronics/ Instrumentation/Electrical) Description: Should have hands on experience on Siemens PLC. Should have knowledge of industrial protocol like TCP IP, Ethernet IP, Modbus TCP IP, Profibus, DNP, RS485, RS232. Should have knowledge of Relay, isolators.responsible for designing, developing, and implementing automation solutions for stocker reclaimer systems within the wireless industry. PLC Programming and Development: Design and develop PLC programs using Siemens PLCs for stocker reclaimer systems. Implement and test PLC code to ensure proper operation of automated systems. System Integration: Integrate Siemens PLCs with existing wireless communication systems and network infrastructure.Ensure seamless operation and compatibility of PLC systems with other automation and control systems. Troubleshooting and Maintenance: Diagnose and resolve issues with PLC hardware and software to minimize downtime.Perform regular maintenance and updates to PLC systems to ensure optimal performance. Automation Optimization: Analyze system performance data to identify opportunities for automation and process improvements.Develop and implement automation solutions to enhance efficiency, reliability, and safety. Project Management: Lead automation projects from concept to implementation, including planning, scheduling, and resource allocation. Collaborate with cross-functional teams to ensure successful project execution and delivery. Technical Support and Training: Provide technical support and troubleshooting assistance to operations and maintenance teams.Conduct training sessions for staff on the use and maintenance of PLC systems and automated machinery.

Design, develop, and program PLC, HMI and SCADA for automation systems in manufacturing or industrial applications. Perform troubleshooting and debugging of PLC, HMI and SCADA programs to resolve system faults and improve system performance. Strong knowledge of PLC programming languages (Structured Text, Ladder Logic, Function Block, etc.), HMI and SCADA. Experience with communication protocols such as Modbus, OPC, Ethernet/IP, Profinet, Bacnet, Profibus, DeviceNet, RS-232, RS-485 & RS-422. Coordinate design activities with other departments within the organization to ensure seamless integration, especially in compliance with industry-specific regulations (e.g., GMP, FDA). Validation Documentation (IQ, OQ, PQ) and Compliance. Collaborate with project managers, electrical engineers, and other stakeholders to gather system requirements and deliver customized automation solutions Good Knowledge on electrical drawing Experience on site commissioning and customer coordination Gather customer requirements and develop related applications and programs Provide technical leadership require for project implementation through design and code reviews, ensuring best technical practices are applied Database querying (MS SQL and My SQL) and third-party communication Must have good verbal and written communication skills Should be a quick learner with sound logical abilities

Design, develop, and program DCS/PLC for automation systems in manufacturing or industrial applications. Perform troubleshooting and debugging of PLC, HMI and DCS programs to resolve system faults and improve system performance. Strong knowledge of programming languages (Structured Text, Ladder Logic, Function Block, etc.), HMI and SCADA. Experience with communication protocols such as Modbus, OPC, Ethernet/IP, Profinet, BACnet, Profibus, Device Net, RS-232, RS-485 & RS-422. Knowledge on MCC/VFD Drives/ Soft starters communication with DCS/PLC Collaborate with project managers, electrical engineers, and other stakeholders to gather system requirements and deliver customized automation solutions Good Knowledge on electrical drawing Experience on site commissioning and customer coordination Gather customer requirements and develop related applications and programs Provide technical leadership require for project implementation through design and code reviews, ensuring best technical practices are applied Database querying (MS SQL and My SQL) and third-party communication Must have good verbal and written communication skills Should be a quick learner with sound logical abilitie

Must be proficient, with hands on experience, in building Ignition applications integrations, SCADA solutions, and HMI Software. Collaborate with clients to understand their requirements and create detailed design specifications (DDS) and test plans for the SCADA/MES project. Develop the application on the Ignition Vision/Perspective module. Design and implement SQL queries and integrate them with various databases. Integrate the SCADA application with third-party systems using industrial protocols such as OPC UA, MQTT, and REST/SOAP APIs. Experience with communication protocols including TCP/IP, OPC, MQTT, Modbus, Web API Good understanding of SQL databases MS SQL, My SQL, PostgreSQL Programming languages including Python, Java, HTML, JavaScript Provide technical support and training to clients. Knowledge about PLC, Integration of different PLC s for shop floor data capture Cross-platform integration (Wonderware, Rockwell, Siemens, and others) Conduct system integration, testing, and commissioning (Offsite/Onsite) activities to ensure smooth and successful deployment. Provide technical leadership require for project implementation through design and code reviews, ensuring best technical practices are applied Must have good verbal and written communication skills Ignition 8.1 Gold Certification preferred.

Responsibilities: Design, develop, test & maintain PLC programs using Abb, Siemens, Allen Bradley software. Collaborate with cross-functional teams on project implementation & troubleshooting.

Deliver & implement the assigned project / work package on time with good quality, cost effectiveness and customer satisfaction. Ensure technical deliverables matches project / work package requirements. Save engineering cost for GEC team through application & technical expertise. Ensure site activities are completed as desired by customer and in specified time frame. Reports to : Team Lead Key Responsibilities DO Willingness to travel frequently at site and troubleshoot/ rectify the issues. Deliver & execute the assigned projects on time with good quality/ cost effectiveness and customer satisfaction Complete Project task based on work assignment. Deliver the assigned projects on time with good quality/ cost effectiveness and customer satisfaction Keep improving self-engineering capabilities and exchange best practice with other team members to improve teams capabilities. Work with Team Leader / Lead Engineer to guarantee customer acceptance. Ensure project implementation follows the engineering delivery standard. Maximize reusable standard product and engineering in project delivery. Technical implementation in whole life cycle of project / work package delivery. Work with Team Leader to manage technical risk in project / work package execution. Support Team Leader / Lead Engineer on technical issues. Work with Team Leader to clarify technical issues. Cost reduction through process & manufacturing improvement, and through development of reusable engineering or engineering standard. Work with Team Leader to manage technical risk in project Work with Team Leader to achieve customer acceptance. Demonstrate application & technical expertise to achieve repeat order and retain customer satisfaction. OVERSEE Ensure 100% meet technical items defined in project / work package. Ensure project implementation follows the procedure of RA engineering standards. Maximize reusable standard product and engineering in project / work package delivery. Support Team Leader in managing team performance, develop self and team capability and motivate the team. Job related competencies Strong level of expertise in Component and Architecture Class Standard Drives, , Safety Product, Networks and a understanding of Motion Control Servo drive Kinetix 5500,5700,6500 Intermediate level of expertise in Industry Knowledge (Tire-Banbury, Tire building machine, Bead winding Curing press, calendaring machine ), Application Knowledge, and EHS (Environment, Health & Safety). Good Working Knowledge of Servo drives based on application like Bead winding, Tire building machine, cutter etc Commissioning experience on PLC, Drive & Servo Technical Knowledge on Electrical Switchgear, Part selection for a drive/Servo Different Electrical Standard knowledge like NEMA, IEC, UL508 will be an added advantage. EDUCATIONAL QUALIFICATIONS / WORK EXPERIENCE (Education, qualifications and experience requirements an employee must have) Bachelors in Instrumentation / Electrical / Electronics. 5 to 7 years of relevant experience in automation engineering on PLC (Rockwell - Control Logix, PLC 5, Compact Logix), experience in automation engineering on Drive/Servo application engineering. Experience of complete project life cycle from design phase to commissioning. Minimum 4-5 years of site commissioning experience Hands on experience in designing, selection and execution of industrial automation products such as PLC/DCS, VFD, HMI/SCADA, Industrial communication (Ethernet, Profibus, Controlnet, Modbus, etc.) Benefits: The ability to collaborate with, learn from colleagues in a complex, global organisation. We provide a working environment with a creative company, paired with a great compensation package, great benefits, and a supportive atmosphere where you can sharpen with new challenges and development opportunities. Hybrid work-from-home and at a determined Rockwell Automation facility. Corporate Social Responsibility opportunities, Support from our 24/7 employee assistance program.

Position: 800xA Engineer Experience: 5-9yrs Location: Whitefield, Bangalore Working experience of 5-9yrs in ABB 800xA complete . Below is the job profile for this job. 800xA Hardware configuration Proficient in 800xA programming development Ladder logic, FBD, SFC, Structured Text etc. Communication Profibus, Profinet , Ethernet, Third party data integration. Works independently on the development as per the process requirement. ABB Graphics builder, Asset Management etc. Willing to travel (Abroad As well) as per the project requirements. Commissioning related Activity on sites. Ready to Relocate Immediate Joiners Ready to travel Bangladesh during commissioning time. The site support must be inclusive of all expenses (visa, travel, boarding, lodging, food etc). The engineers must be able to handle site/customer independently.

• Develop, trial, install & commission control systems focused on Mitsubishi PLC,HMI,SCADA • Knowledge of electromechanical system with pneumatics and hydraulics • Collaborate with members of Control Engg team to develop&implement interface of system

Job Responsibilities Ensuring all maintenance activities as per Maintenance Preparation and modification of Maintenance programs as per operations requirement Ensuring 100% availability of utilities to support and meet production targeted volumes Co ordination in preparing Project and Non Project planning activities as and when required Co ordination in supervising and implementing Project and Non project works Supporting customer departments in achieving yearly targets ( PRS & Non PRS targets Active participation in implementing systems like ISO 9000 , ISO 14001 etc Guiding all reportees in their day to day work Preparation of skill gap analysis for direct reportees and ensuring training for the same To keep watch on spares by taking monthly stock of the same To keep fork lifts in running condition To observe GMP in fork lift dept by daily cleaning and maintaining the Fork lift Dept clean and tidy - Job Requirement Education: B. Tech /BE -Electrical/ Electronics Engineering/ Instrumentation Work Experience: Minimum 6 years in similar function area Must be from a FMCG/Food /Beverage Industry FUNCTIONAL COMPETENCIES & SKILLS: Must have good knowledge of basic components & mechanisms of an Equipment Must have a hands on experience of Equipment maintenance , preparation of Maintenance Plans, Spares management Must have hands on experience in shift operations & man management. Should have worked in shifts for at least 2 years Must be having background of Food /FMCG/ Beverage industry. Exposure to Beverage Bottling operations will be an added advantage Must have basic knowledge of TPM Basics CLIT, PM, Kaizens Must be having basic knowledge of RCA tools such as Why-Why Analysis, Fish Bone analysis Must have basic knowledge of Safety Risk Assessment tools, Emergency Plans, Hazard Identification, Work Permit System Must have basic knowledge about Hygiene, 5S, Food Safety Standards, HACCP

Job Summary If you are a DCS professional, Emerson has an exciting role for you! We are looking for a Project Engineer to work with our energetic Power Greenfield team. You will work independently and/or as part of a team to design, implement and should have adequate experience in Hardware Engineering, Panel design, Understanding the Network Architecture on Emerson s Ovation platform for various Power Generation & Water treatment for India region. You will conduct project Design Review Meetings, Customer Workshops and Factory/Site Acceptance Tests with customers to demonstrate System functionality. You will also perform site commissioning activities and may need to travel about 40% of the time depending on project requirements. If you think this role suits you, join our team and apply now! In this Role, Your Responsibilities Will Be: End to End project design & engineering Implement Greenfield Power & Water as well as Lump Sum Turn Key (LSTK) projects efficiently Should have adequate experience in Hardware Engineering, Panel design, Understanding the Network Architecture, Exposure to Buyouts Understanding of buyouts such as (HMI, Servers, Cables, Control desk/furniture, Field Instruments, Relays, Barriers, HMI, UPS, Chargers, LVS etc. ). Experience to build Bill of Material with support of manufacturing teams for achieving the desired result. Site walk-downs for data collection, IO list preparation. Experience in preparation of cable schedule, engineering documentation, technical quotations and business/customer correspondence. Understanding of the project cycle, time management and production phases. Awareness to technical risk during project execution and site activities. Experience in Pre-FAT and Conducting customer FAT (HW & SW) and SAT. Exposure to the support Procurement team and creating procurement requisition. Working with contractors / sub-contractors and Vendors. Verification and functional testing of I/O interfaces to field devices and Supervision of control system installation, commissioning and start-up. Close collaboration and communication with team members located at different geographical locations, including vendors & sub-contractors. Who You Are: You display a can-do attitude in good and bad times. You recognize when a solution can be balanced. You focus and monitor both formal and informal progress regularly. You provide calmness and efficiency, even when things are unclear. You convert ideas into actions and produce results with new initiatives. For This Role, You Will Need: Degree or equivalent experience in Engineering (Electronics & Communication, Instrumentation & Control, or equivalent field) 7-12 years project engineering experience in field of DCS / PLCs and exposure to commissioning. Hardware design exposure, Procurement exposure. Control design, implementation, process testing for Power and related process Treatment plants. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form. Proficiency with ISA and SAMA logic symbols, Process & Instrumentation Diagrams (P&IDs), electrical, mechanical, and hydraulic schematics Preferred Qualifications that Set You Apart: Excellent written and verbal communication skills Problem-solving, decision-making, and planning skills Ability to write reports, business correspondence and commissioning documents Ability to optimally present information and respond to queries from management, clients, and customers. Proficiency with one or more DCS/PLC platforms (e. g. , ABB Pro Control / Bailey INFI 90 / Symphony Harmony, Yokogawa Centum VP / CS3000, Siemens T3000 / TXP, GE Mark V / VI, Mitsubishi DIASYS Netmation, Invensys, Honeywell TDC3000, MaxDNA, MetsoDNA, Alstom Alspa320, Allen Bradley / GE-Fanuc / Schneider / Siemens PLCs & SCADA etc. ) Knowledge of datalinks (Modbus RTU / TCP-IP, ELC, Profibus, OPC) . Emersons compensation and benefits programs are designed to be competitive within the industry and local labor markets . We also offer a comprehensive medical and insurance coverage to meet the needs of our employees. We are committed to creating a global workplace that supports diversity, equity and embraces inclusion . We welcome foreign nationals to join us through our Work Authorization Sponsorship . We have established our Remote Work Policy for eligible roles to promote Work-Life Balance through a hybrid work set up where our team members can take advantage of working both from home and at the office. Safety is paramount to us, and we are relentless in our pursuit to provide a Safe Working Environment across our global network and facilities. Through our benefits, development opportunities, and an inclusive and safe work environment, we aim to create an organization our people are proud to represent.

Provide competency in the area of Proposal Engineering for PLC / DCS, HMI / SCADA, VFD, Panel Design, and PCC/MCC (Ethernet, Devicenet, Profibus, and Modbus) to lead efficiency in execution. Create functional excellence in the area of Proposal Engineering. Organise and schedule Proposal tasks assigned to her/him to complete within time and with high quality. Use multiple procedures, tools and guidelines, perform several Proposal Estimation support tasks. This position will report to Team Lead. Main Responsibilities: Prepare cost-effective viable automation/Electrical technical proposal based on client / tender requirement by using Rockwell Automation control products. Ensure Proposals are delivered with good quality on time and on budget with high levels of Customer Satisfaction. Use multiple procedures, tools and guidelines, perform variety of Proposal Estimation tools to prepare the high-quality proposal support. Prepare Rockwell products and third-party products BOM after going through client requirement. Man hour estimation for each task. Prepare bottom-up costing for proposed solution. Participate in interdepartmental and client meeting for requirement and scope gathering. Create scope summary, presentation materials and submit them for review by appropriate parties. Preparing proposals with validation through organisation recommended tools. Maintain the confidentiality of sensitive and proprietary technical, financial and commercial information. Showcase accountability for assigned work by achieving commitment and deadlines. Support Industry best practices sharing and knowledge transfer among teams to improve competency of whole team. Follow all applicable corporate, company, governmental, environmental, safety, quality and regulatory procedures for this position. Collaborate internally within Global Engineering Centre and externally with Regional teams to ensure on time delivery of proposals with quality. Oversee: Ensure 100% meet technical items defined in project / RFQ. Ensure project implementation follows the procedure of RA engineering standards. Maximise reusable standard product and engineering in Proposal generation. Support Team Leader in managing team performance, develop self and team capability and motivate the team. Contribute Professional and Technical Expertise. Demonstrate proficiency in technical area and professional expertise relevant to role. Pursue continuous learning; develop knowledge in job-related technical or professional expertise, including increasing breadth and depth of expertise and keeping up-to-date with advances. Invite feedback and help respond to it. Collaborate with Teams. Balances individual goals and team goals. Reach out across organisational lines to establish and maintain work relationships to achieve personal and team goals. Addresses conflict and other barriers to collaboration directly and constructively, adapting to cultural norms and expectations. Share viewpoints openly and directly with others, providing relevant information to those who need it. Share information one-on-one and with small groups, making good decisions as to who, when and how to communicate. Involves the right people to obtain needed information and perspectives. Listen carefully and attentively to others to ensure that their viewpoints are completely heard and grasped. Add Value for Customers and Partners. Understand the requirements of customers and partners associated with their business/function; productively share that understanding with others. Measure and promote customer value derived from Rockwell Automation solutions. Addresses customer and partner needs in ways that differentiate Rockwell Automation products and services. Prioritise own work activities to focus first on those that add value (directly or indirectly) to customers or partners. Attain Results. Excel at execution; monitor progress and redirects efforts, resources and rewards to ensure goals are achieved. Hold self and others accountable for keeping commitments, maintaining standards and achieving goals. Accept new challenges and responsibilities and model Rockwell Automation values. Create Focus and Motivate Others. Support individuals and teams to stretch beyond what they thought they could do. Can attain results from people within Rockwell Automation not under their direct control. Job Related Competencies Use and maintain all business systems for opportunities and proposals (Sharepoint, Bid Request, FTS, IFS, PWO Track2Quote, MS-Office, MS Project). Must have exposure to Global Work style, engagement with Clients working from remote locations. Hands-on experience in designing, execution and selection of industrial automation products such as PLC / DCS, VFD, HMI / SCADA, Panel Design, Servo, Industrial communication (Ethernet, Devicenet, Profibus, and Modbus). Familiar with commercial and financial terminologies. Knowledge of best design practices, Industry standards and cost-effective solutions across globe. EDUCATIONAL QUALIFICATIONS / WORK EXPERIENCE Bachelors in Electrical /Instrumentation / Control / Electronics. 3 to 7 years of relevant experience in automation engineering on PLCs (Rockwell - Control Logix, PLC5, Compact Logix, Siemens, Schneider, ABB, and Mitsubishi). Working knowledge of Drives, PLC MCC System Engineering. Sound Knowledge of Drives and PLC/DCS. Need to have experience in Proposals and Quotations. Benefits: The ability to collaborate with, learn from colleagues in a complex, global organisation. We provide a working environment with a creative company, paired with a great compensation package, great benefits, and a supportive atmosphere where you can sharpen with new challenges and development opportunities.

Hands on experience of Pythons, Json and port programming skills. Server & client servers programming skills for live data streaming & data ingestion. experience on IoT devices, controllers like edge devices, cloud connectors & MQTT brokers.

Rockwell Automation is a global technology leader focused on helping the world s manufacturers be more productive, sustainable, and agile. With more than 28,000 employees who make the world better every day, we know we have something special. Behind our customers - amazing companies that help feed the world, provide life-saving medicine on a global scale, and focus on clean water and green mobility - our people are energized problem solvers that take pride in how the work we do changes the world for the better. We welcome all makers, forward thinkers, and problem solvers who are looking for a place to do their best work. And if that s you we would love to have you join us! Job Description Provide competency in the area of Proposal Engineering for PLC / DCS, HMI / SCADA, VFD, Panel Design, and PCC/MCC (Ethernet, Devicenet, Profibus, and Modbus) to lead efficiency in execution. Create functional excellence in the area of Proposal Engineering. Organise and schedule Proposal tasks assigned to her/him to complete within time and with high quality. Use multiple procedures, tools and guidelines, perform several Proposal Estimation support tasks. This position will report to Team Lead. Main Responsibilities: Prepare cost-effective viable automation/Electrical technical proposal based on client / tender requirement by using Rockwell Automation control products. Ensure Proposals are delivered with good quality on time and on budget with high levels of Customer Satisfaction. Use multiple procedures, tools and guidelines, perform variety of Proposal Estimation tools to prepare the high-quality proposal support. Prepare Rockwell products and third-party products BOM after going through client requirement. Man hour estimation for each task. Prepare bottom-up costing for proposed solution. Participate in interdepartmental and client meeting for requirement and scope gathering. Create scope summary, presentation materials and submit them for review by appropriate parties. Preparing proposals with validation through organisation recommended tools. Maintain the confidentiality of sensitive and proprietary technical, financial and commercial information. Showcase accountability for assigned work by achieving commitment and deadlines. Support Industry best practices sharing and knowledge transfer among teams to improve competency of whole team. Follow all applicable corporate, company, governmental, environmental, safety, quality and regulatory procedures for this position. Collaborate internally within Global Engineering Centre and externally with Regional teams to ensure on time delivery of proposals with quality. Oversee: Ensure 100% meet technical items defined in project / RFQ. Ensure project implementation follows the procedure of RA engineering standards. Maximise reusable standard product and engineering in Proposal generation. Support Team Leader in managing team performance, develop self and team capability and motivate the team. Contribute Professional and Technical Expertise. Demonstrate proficiency in technical area and professional expertise relevant to role. Pursue continuous learning; develop knowledge in job-related technical or professional expertise, including increasing breadth and depth of expertise and keeping up-to-date with advances. Invite feedback and help respond to it. Collaborate with Teams. Balances individual goals and team goals. Reach out across organisational lines to establish and maintain work relationships to achieve personal and team goals. Addresses conflict and other barriers to collaboration directly and constructively, adapting to cultural norms and expectations. Share viewpoints openly and directly with others, providing relevant information to those who need it. Share information one-on-one and with small groups, making good decisions as to who, when and how to communicate. Involves the right people to obtain needed information and perspectives. Listen carefully and attentively to others to ensure that their viewpoints are completely heard and grasped. Add Value for Customers and Partners. Understand the requirements of customers and partners associated with their business/function; productively share that understanding with others. Measure and promote customer value derived from Rockwell Automation solutions. Addresses customer and partner needs in ways that differentiate Rockwell Automation products and services. Prioritise own work activities to focus first on those that add value (directly or indirectly) to customers or partners. Attain Results. Excel at execution; monitor progress and redirects efforts, resources and rewards to ensure goals are achieved. Hold self and others accountable for keeping commitments, maintaining standards and achieving goals. Accept new challenges and responsibilities and model Rockwell Automation values. Create Focus and Motivate Others. Support individuals and teams to stretch beyond what they thought they could do. Can attain results from people within Rockwell Automation not under their direct control. Job Related Competencies Use and maintain all business systems for opportunities and proposals (Sharepoint, Bid Request, FTS, IFS, PWO Track2Quote, MS-Office, MS Project). Must have exposure to Global Work style, engagement with Clients working from remote locations. Hands-on experience in designing, execution and selection of industrial automation products such as PLC / DCS, VFD, HMI / SCADA, Panel Design, Servo, Industrial communication (Ethernet, Devicenet, Profibus, and Modbus). Familiar with commercial and financial terminologies. Knowledge of best design practices, Industry standards and cost-effective solutions across globe. EDUCATIONAL QUALIFICATIONS / WORK EXPERIENCE Bachelors in Electrical /Instrumentation / Control / Electronics. 3 to 7 years of relevant experience in automation engineering on PLCs (Rockwell - Control Logix, PLC5, Compact Logix, Siemens, Schneider, ABB, and Mitsubishi). Working knowledge of Drives, PLC MCC System Engineering. Sound Knowledge of Drives and PLC/DCS. Need to have experience in Proposals and Quotations. Benefits: The ability to collaborate with, learn from colleagues in a complex, global organisation. We provide a working environment with a creative company, paired with a great compensation package, great benefits, and a supportive atmosphere where you can sharpen with new challenges and development opportunities. Corporate Social Responsibility opportunities. Support from our 24/7 employee assistance program. We are committed to equal employment opportunity regardless of race, colour, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace.At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if youre excited about this role but your experience doesnt align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right person for this or other roles. #LI-Hybrid #LI-RS1 Rockwell Automation s hybrid policy aligns that employees are expected to work at a Rockwell location at least Mondays, Tuesdays, and Thursdays unless they have a business obligation out of the office.

Company Description Job Description Qualifications Additional Information About us : BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletizing, packaging, sortation, and distribution technology BEUMER Group offers the right solution for almost every logistic challenge We were founded in 1935 and are independent and privately owned in the 3rd generation and are present in more than 70 countries worldwide Our mission statement of ?long-term success, not short-term profit? isnt only focused on financial success, but also underpins the value we attach to the relationships between our employees PLC & SCADA Software Development for Large Systems Preparation of Functional Design and Detailed Design Specifications Co-ordination with Electrical & IT teams Testing, commissioning & troubleshooting of system PLC Controls development for Baggage / Parcel Logistics projects Advanced Knowledge of SIMATIC S7 PLC System (Simatic Manager & TIA Portal); SIMATIC SCADA System (WinCC & WinCC Flexible) is a must Needs to have experience in PLC programming using Statement List, SCL and Structured Text Should have an experience of programming with S7 pointers/ indirect addressing Should have knowledge of Industrial protocols like Profibus, Profinet, Modbus etc Should be capable of reading electrical drawings, system layouts & material flow diagrams Willingness to travel anywhere in India & abroad >5 years of professional working background We Offer: We offer a wide range of attractive and exciting assignments, plus the chance to continue ones professional and personal development Interesting, challenging projects with Global MNCs, working on innovative technologies Exposure to niche skills and learning opportunities Talented, passionate, and collaborative team the best experts within the industry Flexibility and autonomy If you truly believe you're a fit for the above we're happy to hear from you

Write Python script that formulate test case to run on Robot framework. inte gration testing means and verification tests (continuous integration, non-regression, performance, endurance) using the different available means: automatic test benches, and simulation tools on the laboratorys automatic test bench. Establish an inventory of the existing bench, complete the existing documentation. Define the specifications for the new test benches. Set up the bench equipment (Software Verification Platform) in India. Replay existing tests and obtain similar results. Backup and format the results of the test campaigns. Verify the adequacy of the test means with the new test plans. Adapt the test means to verify cybersecurity features in drive products. Collaborate with the R&D and V&V teams in Pacy-sur-Eure. Challenge the integration test and verification test specifications provided. Ensure the compatibility of the different test benches. Analyze the results to provide consolidated and relevant information. Ensure the maintenance and availability of the test benches. Participate in activities related to continuous improvement, Identify improvement opportunities. Ensure the capitalization of knowledge and know-how and identify opportunities for valorization. Interact with other entities external to Schneider Electric. Deliverables: Establish an inventory of the existing bench. Define the specifications for the new test benches. Acceptance testing of the new test benches. Progress report on the production of test platforms at other sites. Capitalization of test campaign results. Technical Environments: Test Framework: Robot Framework Language: Python 3 Configuration Management: Git Ticketing: Jira Scheduling Servers: Jenkins Project Tracking Methods: Agile / Scrum Communication Protocols: EIP / Modbus / CANOpen / Profibus, Profisafe, TCP/IP, etc. BE/B.tech Computer Science or Electrical Engineering with min 3 years of experience .

Responsibilities Trace equipment & machines maintenance. Bug fixing for system & ensuring production is up & running. Immediate incidence attending, responding & resolving issue. Coordination with internal departments, supplier & customers. Executing POC (proof of concept) on technical & process aspects. Technical specification finalization Equipments. Shift Handing. Skill Sets Technical Skills: Understanding automation & process system concept & POC. PLC, MCU, Scanner, camera, printer and other technical devices integration, configuration & issue handling. Solid understanding of computer programming and software development. Solid understanding & experience in PLC, Robot, NC controller, MCU programming and software development. Ability to troubleshoot equipment and perform complex system tests. Proficiency in maintaining automation equipment. Excellent in electrical design, wiring, testing & troubleshooting. Technical knowledge on mechanical functions. Experience on different kinds of communication protocol (ethernet, profinet, modbus, serial communication, TCP IP & Etc.). Personal or Other Skills: Procurement & strong supplier coordination. Ability to troubleshoot equipment and perform complex system tests. Excellent way of communication. Good listener. Good behaviour. Strong analytical skills Strong leadership and problem-solving skills. A desire to continually upgrade technical knowledge. Good knowledge in executing safety. Indicative Years of Experience -2 to 5 years Educational Background - BE/B. Tech/ Diploma EEE, Mechatronic, Industrial Automation Job Location Hubballi, Karnataka Hubballi- Dharwad twin city is 2nd largest city in the state after Bangalore. Modern city with large industrial setup of Tata, Kirloskar, Hitachi, Infosys & other large- medium value manufacturing setups; part of Bangalore- Mumbai Industrial Corridor; education hub with large engineering/ medical colleges, home to IIT & IIIT; close to Western Ghats, Goa, paradise for nature lovers, historical significance with closeness to Hampi & Bijapur, place of Rani Chennamma. Airport with direct flight connectivity to all major cities. Airport with direct flight connectivity to all major cities.

Role & responsibilities We have opening for various level's on this - 3- 5 yr exp- for Asst. Mgr 5-10 yrs - manager 12 - 20 yrs experience Sr. Manager DGM/GM Experience should be from industrial automation or any electronic component industry from B-B Sales Manage System Integrators Segment (all leading Automation PLC/DCS Manufacturers) for Sales PAN India basis, focusing on project sales. Develop and execute strategies to increase revenue growth through System Integrators Business development. Achieving growth and hitting sales targets by successfully managing the sales team. Providing accurate sales forecast and achieving monthly sales volumes. Identify emerging markets and market shifts while being fully aware of new products and competition status. Build strong relationships with existing clients to retain their loyalty and identify new opportunities. Promote the organization and its products. Collaborate with internal teams to ensure seamless execution of export orders and timely delivery. Strong analytical, strategic & exceptional communication is desired. Excellent leadership skills. Team handling exposure will be an added advantage Self-Motivated and result driven Ability to effectively collaborate with cross functional teams. Deep understanding of CRM systems and best practice. Data analysis and report preparation. Preferred candidate profile BE/Diploma in Electrical/Electronics Engineering with minimum relevant yrs of experience. Automation Product Knowledge will be a plus. Perks and benefits Best in the industry.