228 Predictive Maintenance Jobs - Page 9

Basic Section No. Of Position 1 Grade S1 Level Deputy Engineer Organisational BUSINESS Chemicals BUSINESS_UNIT-1 Grasim Chlor Alkali BUSINESS_UNIT-2 GCA - Renukoot BUSINESS_UNIT-3 GCA - Renukoot DEPARTMENT-1 GCA - Renukoot DEPARTMENT-2 Electrical Country India State Uttar Pradesh Worksite ABCIL - Renukoot Industry Manufacturing Function Engg, Main & Utility Services Skills Skill Supervision Electrical Electrical Controls Minimum Qualification Diploma in electrical eng CERTIFICATION No data available About The Role Job Purpose Key Result Areas ( Max 1325 Characters) Supporting Actions ( Max 1325 Characters) OPERATIONAL EXCELENCE Ensure maintenance of the equipment in coordination with other concerned departments in accordance with all SOPs, norms and safety guidelines are adhered to. To ensure rectifiers is operated at the required taps & capacitor banks are switched on at appropriate load to get the optimum efficiency & power factor. To review the Log Sheets as filled by shift technicians or any deviation recorded and rectify them. Perform visual inspection of the equipment in the areas to identify any equipment which may need predictive maintenance. In case any critical equipment which may require process shutdown and is not available, ensure that the same continues to deliver until opportunity is provided. To maintain minimum inventory at section for effective handling of any breakdown within time limit by following all safety standards. POWER EFFICIENCY To ensure operation of rectifiers and High load Motors at the desired efficiency & provide power at the required efficiency. To ensure the availability and healthiness of capacitor banks to maintain the power factor. To analyse the running efficiency of the high rated motors and ensure maximum efficiency delivery. Energy Conservation To review and drive major energy saving initiatives across the plant to achieve targeted energy saving. Prepare,compile and submit energy saving areas/schemes to manager. Execute the approved plan & monitor energy savings. Manpower Handling Managing workforce to execute job effectively and within timeline. Optimize the manpower utilization at respective areas. Proper and effective utilization of assigned manpower for the Jobs. Prepare shift engineer shift schedule monthly Safety, Occupational Health and Environment Achieving the safety standards to ensure safe and healthy work environment Ensure no violation in safety , environment and occupational health norms while executing any assigned Job. Ensure LOTO standard implementation . Monitor waste management and ensure proper disposal of the same. LAISONING All time grid availability for uninterrupted power To ensure healthiness of the grid in association with the UPPTCL. To ensure Energy metering and monthly bill on time and correct to avoid any penality. To ensure our running parameters are under all regulations, rules and norms as per contract to avoid any penality. To facilitate inspection interval of three years by Electrical Inspector and provide all the requirements raised by Government Bodies. SLD Approval for New Electrical Equipments by Electrical Inspector. Letter Writing Govt Autority for Electrical related Work to UPPTCL/PuVVNL.

Job Requirements Should have experience in executing maintenance activities in Caster, Tunnel Furnace, Hot Strip Mills. Hands on commissioning in Caster, Tunnel furnace, Hot Strip Mills is an added advantage. Offer technical expertise to maintenance people like supervisor, foreman, and technicians Expertise in organizing, planning & coordination of day-to-day maintenance activities Strategize on maintenance, work instruction and methods. Create plant preventative maintenance procedures Plan routine maintenance of plant equipment/ Instruments. Schedule and obtain project material and manpower. Check work-in-progress and during completion to meet specifications. Documentation and preparation of daily progress reports and maintenance logs Should have deep knowledge in siemens PLC Automation (Siemens PLC- S7-300/400/400H/1200/1500- PCS-7). Preventive, Predictive and Breakdown Maintenance jobs and periodic inspection associated with PLC system including all the software & hardware aspect of programming and networking. Experience in troubleshooting in Fault finding, repair and replacement of control /instrumentation cable between PLC, RIO panel and field devices Should have knowledge of Electrical control system, Server Hardware, handling different software related to automations. Preventive, Predictive and Breakdown Maintenance of Level-1 and Level-2 Networks, Servers, Engineering Stations, Emergency Workstation, HMI, View Monitors, Laptops, Printers, active and passive components etc Should have an ability to identify and troubleshoot the malfunctions, replacing parts and components. Should be familiar with safety procedures while carrying out electrical work. Keep good Coordination and Communication, good relationship with Team members and Client. Should be familiar with Report preparation, PPT & Excel. Qualification requirements You should have minimum 5years experience preferably in SIEMENS PLC Automation, Network servers along with bachelors degree in Commuter/Instrumentation/Electrical/ Electronic engineering. Experience in commissioning of Siemens Automation system Experience in Steel Plant / Large Metal plant is mandatory preferably from Caster/Rolling mills

Managing the Mechanical utility equipment s move in, I & C , FAT & SAT during project phase Maintenance of entire mechanical equipment for running the operations 24*7*365 days. Leading a large size team of technical resources including engineers for smooth functioning of maintenance activities in all shifts for 365 days of operation. Monitoring & maintaining the schedule of maintenance activities to management on a weekly, monthly and yearly basis. Planning and monitoring breakdown, preventive, corrective and predictive maintenance of Plant Equipment. Reviewing and following through the maintenance Overall Equipment Efficiency (OEE) targets. Enhancing life cycle of equipment by analysis critical spare parts and replacing/ refurbishing high-cost spare parts, drafting equipment obsolesce study and proposing up-gradation & replenishment plans within suitable budget to the management. Responsible for cost reduction during process activities. Should be able to think out of box.

Managing the Mechanical utility equipment s move in, I & C , FAT & SAT during project phase Maintenance of entire mechanical equipment for running the operations 24*7*365 days. Leading a large size team of technical resources including engineers for smooth functioning of maintenance activities in all shifts for 365 days of operation. Monitoring & maintaining the schedule of maintenance activities to management on a weekly, monthly and yearly basis. Planning and monitoring breakdown, preventive, corrective and predictive maintenance of Plant Equipment. Reviewing and following through the maintenance Overall Equipment Efficiency (OEE) targets. Enhancing life cycle of equipment by analysis critical spare parts and replacing/ refurbishing high-cost spare parts, drafting equipment obsolesce study and proposing up-gradation & replenishment plans within suitable budget to the management. Responsible for cost reduction during process activities. Should be able to think out of box.

To carry out preventive and predictive maintenance as per the schedule To monitor the performance of production and auxiliary equipment as per the stated procedures To attend the breakdown maintenance and involve in arriving at corrective actions Required Candidate profile To monitor the performance of gas yard equipment and support the melting team during atomization in operating the gas plant equipment Maintain 5S in the working environment

Knowledge OF BREAKDOWN, PREVENTIVE, PREDECTIVE MAINTENANCE, SPARE PART PLANNING, MACHINE HISTORY CARDS, IATF DOCUMENTATION. •M/C- CNC GEAR SHAPER, GEAR HOBBING, VMC, CNC TURNING, GEAR HONNING, GRINDING. Required Candidate profile •ABILITY OF READING MACHINE DRAWING, HYDRAULIC CIRCUIT DAIGRAM READING, MANPOWER HANDLEING, DEALING WITH VENDOR & SERVICE PROVIDERS, MACHINE GEOMATICAL ACCURACY TESTING, MACHINE SUBASSEMBLIES.

Lead MAINTENANCE Dept focusing on MACHINE MAINTENANCE, IMPLEMENT MAINTENANCE STRATEGIES, PNEUMATIC TROUBLESHOOTING, MONITOR EQUIPMENT PERFORMANCE, MONITOR EQUIPMENT LIFESPAN, PLC PROGRAMMING, MMI PROGRAMMING, Machine PM/TBM/CBM activities, MTTR, MTBF Required Candidate profile Only BE 15+yrs exp with EMS/AUTO/AUTO EMS unit into MAINTENANCE Strong skills in MACHINE MAINT, TEAM MGMT, MISTUBISHI PLC, MMI, PNEUMATIC, ROBOSTAR SERVO PROGRAM, TESTING MACHINES, COST CUTTING ETC Perks and benefits Excellent Perks. Send CV cv.ch2@adonisstaff.in

Job description Job description We are looking for Candidate with BE/B.Tech. Automobile/Mechanical having 0-1 years of fresher/experience wanting to make an exciting career in the Plant & Machinery Department of Construction industry Local Candidates of Mumbai or those who are staying in Mumbai aneeds to apply Job Description:- Tracking Utilization of Various Equipment's Monitoring overall Preventive Maintenance/ Repair etc. Ensure the minimization of breakdowns at construction Sites Knowledge of Spare Parts used by various construction equipment's like Hyva, Excavator, DG, Boomers etc. Manpower management in regards to allocated Equipment's Ensuring uptime of all Equipment's Check and certify the tracking book for hired equipment's working at site. Controlling Costs to achieve budgetary goals Timings for Walk In Interviews: 1045AM - 12:45PM, 2:00PM - 4:00PM INTERESTED CANDIDATES CAN EMAIL THEIR CV on anushka.gowalani@onyconinfra.com, hrteam.onyconinfra@gmail.com or call on 7208085369. Role Mechanical Engineer Industry Type Engineering & Construction Department Production, Manufacturing & Engineering Employment Type Role Category Engineering Education UG : Diploma - Mechanical, Any Graduate, B.Tech/B.E. - Mechanical PG : Doctorate : Role: Maintenance Engineer Industry Type: Engineering & Construction Department: Production, Manufacturing & Engineering Employment Type: Full Time, Permanent Role Category: Operations, Maintenance & Support Education UG: B.Tech/B.E. in Automobile, Mechanical

Job TitleDRI MECHANICAL. HOD Job Code HREQ2017/12/66 --> Job Location purulia Experience 10-15 years. Gender Male Job Details Urgently looking for a male candidate for the post of " DRI MECHANICAL.HOD ". JOB DESCRIPTION OF DRI MECH HOD Need to have 15 years experience in DRI/SPONGE IRON Must have exp. In fabrications, maintenance of E.S.P., 100TPD * 4 Kiln & cooler, impactor, crushers, bag filter, vibrating screen, conveyors, etc. Involving in Various Modification Works Which Improves Less Shutdown and Running Plant For Smooth Operation. Procurement, Inventory, plant Costing. Breakdown Maintenance, Preventive Maintenance, Predictive Maintenance, Maintaining Lubrication Schedule, Take Over Modification Job, cost management. Kiln Coal Injector Maintenance. Maintenance of Screw, reciprocate & Lobe Compressor , Hydraulic and Pneumatic Cylinder , Hydraulic Power Pack Maintenance. Gear Box (plant required) Maintenance. HOT AND COLD E.S.P Operation & Maintenance. All DE DUSTING Bag Filter System Operation & Maintenance. All Dense Phase System, Silo Dust Drain PUGMIL, R.A.V Maintenance. Crushers Cone, jaw, drum, teeth roll crushers. Vibrating Screen, Linear, circular screen. Magnet Separator Concentrator, drum separator. Maintenance of Pumps .High pressure, centrifugal. Qualification:- Diploma / B.Tech in Mech. Salary Per Year 6-8 LPA Apply Now

Job Title: Maintenance Manager Department: Maintenance / Engineering Reports To: Plant Manager Industry: Dairy Processing Job Summary: The Maintenance Manager is responsible for leading the maintenance team in the upkeep, repair, and continuous improvement of all equipment, utilities, and infrastructure within a dairy processing facility. The role ensures high equipment availability, compliance with safety and food quality standards, and the implementation of preventative and predictive maintenance programs. Key Responsibilities: Maintenance Planning & Execution: Develop and manage a comprehensive preventive maintenance schedule. Oversee all mechanical, electrical, and utility systems (e.g., refrigeration, boilers, CIP systems, pasteurizers, separators, homogenizers). Minimize downtime and ensure operational continuity. Team Leadership: Lead, supervise, and develop a team of maintenance technicians and engineers. Coordinate training to maintain technical competence in line with new technologies. Compliance & Safety: Ensure compliance with food safety (e.g., FSSAI, HACCP), quality, and environmental regulations. Enforce safety policies and conduct risk assessments. Maintain documentation for audits and inspections. Budget & Inventory Control: Prepare and manage the maintenance budget. Monitor spare parts inventory and procurement to minimize downtime. Continuous Improvement: Implement reliability-centered maintenance (RCM) and root cause analysis (RCA) practices. Support TPM (Total Productive Maintenance), 5S, and Lean initiatives. Coordination & Communication: Work closely with production, quality, and engineering departments to plan maintenance activities with minimal disruption. Communicate effectively with external vendors and contractors. Qualifications: Bachelor’s degree or diploma in Mechanical/Electrical Engineering or related field. 10+ years of experience in maintenance leadership, preferably in the dairy or food processing industry. Strong knowledge of dairy equipment and utilities (ammonia refrigeration, steam systems, etc.). Familiarity with CMMS (Computerized Maintenance Management Systems). Working knowledge of GMP, HACCP, and other food industry compliance standards. Excellent leadership, communication, and organizational skills. Preferred Skills: Experience with automation systems (PLC, SCADA). Project management capabilities. Knowledge of energy management and sustainability practices

electrical & Mechanical maintenance MIn 2-10 Exp only cnc vmc hmc Location-talegaon Plant Pune /Mushi Pune

Diploma / B.E / B.Tech in Mechanical / Electrical discipline. 3 to 5 years of experience in maintenance and machinery handling. C certified. Ability to troubleshoot issues in the machinery. Ability to plan. Key Responsibilities: Responsible for implementation of preventive and predictive maintenance for all machines /electrical equipment s. Handle maintenance of machines/ electrical equipment and minimize breakdown. Responsible for technical and implementation support to all other projects. Responsible for utilities maintenance. Supervise the employees and prepare necessary documents, as per requirements.

Job description We are looking for Candidate with BE/B.Tech. Automobile/Mechanical having 0-1 years of fresher/experience wanting to make an exciting career in the Plant & Machinery Department of Construction industry Local Candidates of Mumbai or those who are staying in Mumbai aneeds to apply Job Description:- Tracking Utilization of Various Equipment's Monitoring overall Preventive Maintenance/ Repair etc. Ensure the minimization of breakdowns at construction Sites Knowledge of Spare Parts used by various construction equipment's like Hyva, Excavator, DG, Boomers etc. Manpower management in regards to allocated Equipment's Ensuring uptime of all Equipment's Check and certify the tracking book for hired equipment's working at site. Controlling Costs to achieve budgetary goals Timings for Walk In Interviews: 1045AM - 12:45PM, 2:00PM - 4:00PM INTERESTED CANDIDATES CAN EMAIL THEIR CV on anushka.gowalani@onyconinfra.com, hrteam.onyconinfra@gmail.com or call on 7208085369. Role Mechanical Engineer Industry Type Engineering & Construction Department Production, Manufacturing & Engineering Employment Type Role Category Engineering Education UG : Diploma - Mechanical, Any Graduate, B.Tech/B.E. - Mechanical PG : Doctorate :

Hello, We have urgent requirement of Technical Assistant Maintenance in our Manufacturing – Stationery Plant Job Title: Technical Assistant – Maintenance Area of Responsibility Maintain, Install and repair all plant equipment’s in Production. Carry out related Preventive Maintenance work. Identify the problem, attend breakdown and resolves problem in minimum time. Identify spares requirements and process if further Highest Qualification : ITI Fitter with basic understanding of pneumatic, hydraulic and other systems. Total Experience : Min. 3-8 years of experience. Facilities from Company – Pick-Drop Service, Duty Meal ,PF, ESIC etc. Interested candidate can share updated CV on contact- 9175060115 or Mail on - hr.khaniwade@navneet.com If not suitable kindly share your reference who are Interested for this position. Thanks&Regards, Mayuri.

Please share your CV on sv12@svmanagement.com & auto1@svmanagement.com Mechanical maintenance of CNC machines, breakdown and Preventive maintenance. Mandatory Skills/ Knowledge Requirement like SAP/ CATIA/ CNC Operations, etc Should independantly able to attend mechanical breakdown,predective and planned maintenance, Preventive maintenance. Ready to work along with Preventive maintenance team. SAP system, Word, Excel, PPT knowledge

Basic Section No. Of Position 1 Grade ST Level NA Organisational BUSINESS Metals BUSINESS_UNIT-1 Copper Manufacturing Dahej BUSINESS_UNIT-2 Copper Recycling Project BUSINESS_UNIT-3 Copper Recycling Project DEPARTMENT-1 Unit Projects Country India State Gujarat Worksite Pakhajan, Gujarat Industry Construction / Engineering / Cement / Metals Function Engg, Main & Utility Services Skills Skill Process Control Minimum Qualification Metallurgical & Materials Engg Graduate Dip in Material Mngmt CERTIFICATION No data available About The Role Team ManagementSupervise and lead the refractory team, including engineers, technicians, and support staff. Project ManagementManage refractory-related projects, including new installations, upgrades, and refurbishments. Maintenance and RepairsDevelop and implement maintenance schedules for refractory linings of furnace for different stages of smelting . Oversee repairs and replacements as needed. Process OptimizationMonitor and optimize refractory performance to improve efficiency and reduce downtime. improving furnace campaign life. Involvement in SOPs preparation & Implementation at shop floor Quality ControlEnsure that refractory materials and installations meet industry standards and quality requirements.Participating and leading improvement activities such as kaizen, Quality Circes etc. Planning and Budgetry controlsPrepare and manage annual budgets for refractory operations, including procurement of materials and tools. CAPEX budget planning for annual shutdown. Collating inputs for the annual R&M budget and MOC with regard to repair & maintenance expenses, operating supply of consumables etc. for refractories and anti-corrosion lining at the assigned areas. Analyzing data on refractory performance in assigned area and collating predictive maintenances well as annual shutdown requirement in coordination and relevant operating departments. Safety ComplianceEnforce safety protocols and ensure compliance with safety regulations and standards. achieving target safety index. Preparation and implementation of HIRA and JSA documents. Training and DevelopmentProvide training and development opportunities for staff to enhance skills and knowledge in refractory materials and techniques.

Basic Section No. Of Position 1 Grade 11 Level Engineer Organisational BUSINESS Birla Carbon BUSINESS_UNIT-1 Birla Carbon India Offc BUSINESS_UNIT-2 Birla Carbon Gmpd Plant BUSINESS_UNIT-3 Birla Carbon Gmpd Plant DEPARTMENT-1 Operations DEPARTMENT-2 Process Country India State Tamil Nadu Worksite Gummidipoondi, Thiruvallur,T.N Industry -- Function Manufacturing Operations Skills Skill Troubleshooting Process Engineering Field Maintenance DCS operator Minimum Qualification DXPF3.Bachelor of Engineering Master of Chemical Engineering CERTIFICATION No data available About The Role Job Purpose Executing all process activities for smooth plant operation in producing Quality Carbon Black. Job Context & Major Challenges Job Context Birla Carbon, Gummidipoondi unit was commissioned in 1998 and since then has been progressively expanded to 5 production lines, to reach its current annual production capacity of approximately 2,25,000 MT of carbon black. It is the largest carbon black manufacturing unit in India, and amongst the top 3 largest manufacturing units for Birla Carbon globally. In addition to carbon black, the unit has power generation (co-product of carbon black manufacturing) capacity of 60.7 MW and also rubber master batch (downstream product for carbon black) capacity of approximately 15,000 MT per annum. Birla Carbon, Gummidipoondi has implemented a management system which meets all requirements of various standards including IATF 16949:2016, ISO 14001:2004, OHSAS 18001:2007 to manage Quality, Environment, Occupational Health & Safety. Power generation and export is a major value driver. The unit has 60.7 MW power generation capacity, part of which is used to meet the requirements of unit and the balance is exported to the network. Job Challenges: ) To minimize off spec generation through effective participation of shift team in process change activities. b) To meet high internal customer (QC, Ware House) expectation through effective implementation of process parameters. Key Result Areas KRA (Accountabilities) (Max 1325 Characters)Supporting Actions (Max 1325 Characters)KRA1Production To implement set guidelines for trouble free operation.Analysis of critical parameter & communicating any abnormalities for immediate action in shift. Assisting Shift In-Charge in all process activity like Grade change, Reactor Start-up, Equipment change over, changing process parameter for any change in DCS & field. To follow all SOPs strictly as per QMS. To follow preventive and predictive maintenance Schedule in coordination with Engg . Routine plant rounds for identification of abnormalities and taking corrective actions with information to Shift In-Charge. Execute and supervise Refractory / Bag fixing jobs.KRA10Process MIS Preparation of shift activity, events report to help in initiating improvement measures.Preparing Shift wise Production report Maintain shift log book for each activities in every shift Log sheet generation after logging the process parameter readings in DCS. Entering the quality parameter in register after getting from shift chemist.KRA2Quality Control To implement standard practices for maintaining product quality.Assist to maintain key process parameters as per product characteristics. Assisting in timely inspection of product quality at each process change to reduce off spec generation. Prepare, analyse Control Chart, Run Chart and find out reason of abnormality for taking corrective action during shift in order to obtain consistent quality.KRA3. Cost Control Optimum utilization of Resources & waste minimization to contribute in achieving cost effectivenessRecord Keeping of cost incurred due to reprocessing, energy loss, waste generation, break down, & other quality indicators.KRA4QMS Implement all systems, Procedures & Work Instructions for maintaining ideal plant operation.Understanding systems, procedures and work instructions. Taking part in WCM, quality circle, kaizen, 5-S activities.KRA5Process MIS Preparation of shift activity, events report to help in initiating improvement measures.Preparing Shift wise Production report Maintain shift log book for each activities in every shift Log sheet generation after logging the process parameter readings in DCS. Entering the quality parameter in register after getting from shift chemist.KRA6Production To implement set guidelines for trouble free operation.Analysis of critical parameter & communicating any abnormalities for immediate action in shift. Assisting Shift In-Charge in all process activity like Grade change, Reactor Start-up, Equipment change over, changing process parameter for any change in DCS & field. To follow all SOPs strictly as per QMS. To follow preventive and predictive maintenance Schedule in coordination with Engg . Routine plant rounds for identification of abnormalities and taking corrective actions with information to Shift In-Charge. Execute and supervise Refractory / Bag fixing jobs.KRA7Quality Control To implement standard practices for maintaining product quality.Assist to maintain key process parameters as per product characteristics. Assisting in timely inspection of product quality at each process change to reduce off spec generation. Prepare, analyse Control Chart, Run Chart and find out reason of abnormality for taking corrective action during shift in order to obtain consistent quality.KRA8. Cost Control Optimum utilization of Resources & waste minimization to contribute in achieving cost effectivenessRecord Keeping of cost incurred due to reprocessing, energy loss, waste generation, break down, & other quality indicators.KRA9QMS Implement all systems, Procedures & Work Instructions for maintaining ideal plant operation.Understanding systems, procedures and work instructions. Taking part in WCM, quality circle, kaizen, 5-S activities.

Job Description 1.Communication during shift change over 2.Should maintain 5S, safety at his workplace 3.Maintaining the uptime of the machine. 4.Responsible for Maintenance of testing & Inspection equipment(ICT- SPEA, SPI-Kohyoung, AXI-Viscom , OMRON and AOI-Mirtec). 5.Implement systematic problem-solving techniques to address and resolve issues effectively. 6.Responsible for spare parts management( Including obsolete spares ) 7.Collaborate with Cross-Functional Teams (CFT) to address open issues and incorporate feedback. 8.Should predict the problems in the machine and take preliminary actions to avoid the breakdown (implementation of Predictive maintenance) 9.Tooling Management. 10.Ensure the adherence to manufacturing process compliance with legal & safety requirements, customer requirements, Bosch standards and process specifications and ensure the team also follows the same 11.Should work in 3 shifts operation and reports to Maintenance shift Leader. 12.Evaluate and integrate new automated testing tools/jig and methodologies. 13.Co-ordination with Process owner for improvement activities 14.Quick Adaption of Change Management. 15.Create Machine FMEA and review. Change potential points into CBM. 16.Knowledge transfer and Lessons Learned deployment across the team members. 17.PP measure implementation for productivity and process improvements (e.g. Tool life extension, Tool/Spare parts localization ) 18.Effective Escalation to suppliers on open points and breakdowns work towards closing them. Qualifications Diploma in Electrical /Electronics and communication Engineering

About The Role Role Finance and Administration CSR: 360 degree CFO Like responsibility in running functions and entities Will be responsible for managing accounts, compliances and Tax for ~ 3 not for profit entities Will support financial reporting for CSR Hybrid work structure for work life balance Requirement CA with 5-7 years of experience Deep understanding of financial, legal, tax and compliances matter .

Responsibilities include Developing digital service sales funnel and meeting sales quota. Understand and follow sales processes to generate revenue and digital subscription. Build and promote strong, long-lasting customer relationships by partnering with them and understanding their needs. Identify emerging markets and market shifts while being fully aware of the new services and competition status. Deep understanding of markets, customers, and competitors to target needs and drive sales. Forecast annual, quarterly and monthly sales forecast. Generate timely sales reports. Conduct market research, trends, competitors and customer analysis. Develop and implement new sales initiatives and strategies. Meet with customers to discuss their evolving needs and to assess the quality of our company s relationship with them. Extensive knowledge of digital sales, digital platforms, technical markets, pricing models, channels of distribution, technology trends, customer buying patterns and budgeting. Job brief Digital Service Sales Engineer role is customer facing and you will be responsible to generate sales pipeline, position OpenBlue solution portfolio to the excising install-base and new customers to ensure high customer satisfaction index and expand our service business. Educate and encourage our service customers to leverage digital technology and new innovative approaches. Position JCI as their partner throughout their digital transformation journey. Educate and promote OpenBlue digital service portfolio, the IoT, Digital solutions and services within the commercial construction and vertical markets that includes existing install-base as well new customers in various vertical business. Develop and present digital transformation roadmaps to our customers, define projects and implementation and integration recommendations that best match with the customer s existing environment and that meet customer expectations. What will you need to succeed Hold a bachelor s degree in Electronic or Electrical or Computer Engineering with minimum 3-5 years of Sales experience with emphasis on digitalization and digital services. Familiarity with HVAC and Building Management System (BMS). Knowledge of common HVAC and electrical building codes, IoT, Cloud offering & Industry 4. 0. Have Proven track record and technology expertise to drive solutions and services around Digital and Data driven services, Energy & Asset performance services, Predictive Maintenance analytics, Fault Detection & Diagnostics, System performance monitoring & reporting and Building Performance optimization. Have willingness and flexibility to travel up to 50% of the time, domestically as required.

Role & responsibilities: Hands on experience in Press shop, Tool room & utility for trouble shooting for Mechanical / electrical breakdown. Responsible to IATF system documents and the execution of PM as per plan. Implement the improvement projects related to cost reduction & Quality. Reduction in spare part cost. Root cause analysis & implementing of actions. Predictive maintenance planning and Execution. Responsible for redticing maintenance cost. Working in SAP PM module & monitor data. Breakdown Analysis, Poke yoke and Kaizen. Understanding of mechanical drawing & hydraulic circuit

Role & responsibilities Experience in maintenance of HEMM. Implementation of preventive & predictive maintenance practices. Monitoring of equipment breakdowns and maintenance activities. Hand on Experience with Heavy earth moving machinery (Loader, Excavator, Dumper, Dozer, etc.) Performs preventive maintenance inspections and on time service on machines. Daily coordination with the team with regards to all vehicles & machineries. Maintaining the optimum spares required for operating the equipment. Coordinating with store department to maintain spares inventory for critical items. Maintains and updates breakdown reports. Responsible for the efficient Asset Management of the Heavy Mining equipment by approaching maintenance as a continuous improvement process with the goal of safety, enhancing asset reliability and optimizing costs. Responsible for monitoring & audit of HEMM maintenance In-depth knowledge of mechanical systems, hydraulics, pneumatics, and electrical components in HEMM. Fuel consumption analysis Preferred candidate profile Candidates with deep knowledge of HEMM, good communication and presentation skills are preferred. Interested candidates please share your CV on my email ID jessica.fernandes@vaaman.in or WhatsApp your CV on 8655316227

Role & responsibilities Job Summary: We are seeking a highly skilled and proactive Engineer / Sr. Engineer - Machine Maintenance with 5-10 years of hands-on experience in maintaining CNC machines (Grinding, Polishing, Lapping), SPM (Special Purpose Machines), assembly equipment, and other critical production machinery. The candidate will be responsible for minimizing equipment downtime, improving machine reliability, and ensuring smooth operation through preventive and breakdown maintenance strategies. Key Responsibilities: Perform and lead preventive, predictive, and corrective maintenance activities on CNC machines (Grinding, Polishing, Lapping), SPM machines, and assembly equipment. Monitor and improve MTTR (Mean Time to Repair) and MTBF (Mean Time Between Failures) to ensure high machine availability. Troubleshoot and resolve breakdowns in a timely and efficient manner. Maintain spare parts inventory and ensure the availability of critical components. Maintain and update maintenance logs, service reports, and downtime analysis. Lead root cause analysis (RCA) for recurring issues and implement permanent solutions. Ensure compliance with safety, health, and environmental procedures in maintenance operations. Coordinate with production, engineering, and external service providers for planned and unplanned maintenance tasks. Contribute to continuous improvement initiatives and machine reliability enhancement projects. Manage maintenance schedules and ensure adherence to preventive maintenance plans. Prepare and present maintenance KPIs and reports to management. Guide and mentor junior maintenance staff and technicians. Required Skills & Experience: Proven experience (510 years) in maintenance of CNC machines (Grinding, Polishing, Lapping), SPMs, and production assembly machinery in an electronics or manufacturing environment. Strong knowledge of breakdown maintenance , MTTR , MTBF , and maintenance planning. Hands-on expertise in mechanical, electrical, and pneumatic troubleshooting. Familiar with PLCs, automation systems, servo systems (added advantage). Proficient in reading machine manuals, schematics, and technical drawings. Good knowledge of safety standards and statutory compliance related to maintenance. Strong problem-solving, communication, and team management skills. Education: B.E / B.Tech in Mechanical / Electrical / Mechatronics from a recognized university (Full-Time, Regular is mandatory ). Strong Communication

BE/ Diploma Mechanical Fresher Department : Maintenance Location : Surat / Bharuch / Ahmedabad Job time : 9 to 7 Salary of 25000 to 35000 Travel Free Bonus opportunities PF/ESIC benefits Travel Free from company Mo No : 90816 99400 /90816 99600 Required Candidate profile Bachelor's degree in Quality Management, Engineering, or a related field. Proven experience as a QC Head or similar role, preferably in an e-commerce or manufacturing environment.

Job Title: Executive Digitalization Location: Sanand, Gujarat Department: Continuous Improvement (CI) Reports To: Senior Manager – CI About the Role: A leading global personal care manufacturer is looking for a dynamic and digitally inclined professional to join its Continuous Improvement team. The Executive – Digitalization will lead the development and implementation of smart factory solutions aimed at improving plant performance, enabling predictive maintenance, and supporting cost-saving initiatives. This role is ideal for someone passionate about Industry 4.0 and process excellence. Key Responsibilities: 1. Digital Project Development & Evaluation Identify digital opportunities within plant operations. Build project proposals with ROI, aligning with business and operational priorities. Benchmark relevant digital use cases from within and outside the industry. 2. Predictive and Progressive Maintenance Enablement Support digital integration into maintenance strategies. Implement condition monitoring tools to improve machine reliability and reduce unplanned downtime. 3. Process Troubleshooting & Knowledge Systems Collaborate with technical teams to develop digital troubleshooting guides. Capture and standardize learnings for continuous problem-solving improvements. 4. Vendor Management & Solution Onboarding Interface with digital solution providers to assess and pilot new technologies. Recommend scalable, easy-to-integrate systems for shopfloor improvement. 5. Operational Excellence & Efficiency Tracking Monitor and update Overall Equipment Effectiveness (OEE). Support material loss tracking by establishing automated measurement tools (e.g., checkweighers, flow meters). Conduct Value Stream Mapping to eliminate inefficiencies. Candidate Profile: Degree in Engineering (Mechanical/Electrical/Instrumentation or similar). 10+ years of relevant experience in manufacturing, operations, or industrial digitalization. Understanding of TPM/Lean/Industry 4.0 tools. Strong analytical and coordination skills with a solution-driven mindset. Comfortable engaging with cross-functional teams and external vendors. Why This Role? Hands-on experience driving digital transformation in a world-class manufacturing setup. Opportunity to lead impactful projects aligned with global smart manufacturing standards. Exposure to modern technologies and a strong continuous improvement culture.