103 Precast Jobs - Page 2

Role & responsibilities Design and layout electrical systems (conduits, boxes, wiring paths) in precast wall panels, slabs, and other elements. Prepare detailed electrical drawings, schematics, and load calculations using AutoCAD, Revit, or BIM tools. Coordinate with structural and architectural teams to ensure clash-free integration of services. Specify electrical components, materials, and fittings compliant with project and local code requirements. Perform design calculations for lighting, power distribution, grounding, and panel sizing. Review and approve shop drawings and ensure timely submission for client/consultant approval. Assist in resolving design conflicts and RFIs during precas...

Responsibilities Develop, implement, and continuously improve safety policies and procedures in compliance with local regulations and Adani standards. • Conduct regular safety inspections and audits to identify potential hazards and ensure corrective actions are taken promptly. • Provide safety training and inductions to employees, contractors, and visitors to promote a culture of safety awareness. • Investigate accidents, near misses, and incidents, and implement preventive measures to avoid recurrence. • Collaborate with project managers and stakeholders to integrate safety practices into project planning and execution. • Maintain accurate safety records and reports for internal and extern...

Role & responsibilities Design and develop mechanical layouts integrated within precast concrete panels and elements. Coordinate MEP requirements with structural and architectural teams to ensure clash-free embedded services. Prepare detailed design drawings, mechanical schematics, and technical specifications using AutoCAD/Revit or similar BIM software. Conduct mechanical analysis related to precast systems (ventilation openings, insulation, fire rating, etc.). Ensure compliance with international codes and standards (ASHRAE, NFPA, IS codes, etc.) and project-specific requirements. Collaborate with production and site teams to ensure design feasibility and ease of installation. Review and a...

Key Responsibilities Understand the daily Work/target from engineer and input required in terms of manpower, equipment and material. Mobilize required workers, tools, tackles and equipment at work place. Place requisition for concrete or any other materials required during the day. Supervise and guide workers for execution of work as per the line, level and desired workmanship. Take guidance from site engineer/ Sr Engineer for any clarification or guidance to ensure first time right work. Ensure curing of the works till the curing period is over. Check that the equipment/machinery is not detained at work place more than what is required or necessary. Keep watch on use of PPEs and ensure plac...

Role & responsibilities To ensure completion of Project in time. To ensure compliance with quality specification and ISO procedures. To ensure cost compliance within budget and improved margins. To ensure compliance with safety manual and safety action plan specific to the project. To motivate staff and develop the team. To maintain good customer relations. To maintain good relations with local bodies and surrounding community Preferred candidate profile Graduate in B.tech/B.E (Civil) with 17- 25 yrs exp and 8 -10 yrs experience in Highrise, & Institutional Candidate shall be responsible for the Project Execution and operations according to the stipulated terms of the contract Candidates exp...

CAD Designer- Precast EducationDiploma/Graduates in Civil EngineeringExperience2-3 years of relevant experience Roles and responsibilities Basic understanding and experience in Precast detailing with appropriate engineering knowledge. Ability to prepare drawings with high accuracy, good speed and clear presentation Proficiency in AutoCAD is mandatory Experience in Tekla structures will be advantageous. Ability to review drawings and prepare RFIs (Request for Information) in good English will be useful The qualities you will aim for is high accuracy, good speed and clear presentation of your drawings. You are expected to detail accurately, present clearly and submit on time as per the committ...

1-2 Years of Experience in Design Coordination and execution for Precast RCC Projects (High-rise, Commercial) Background in Structural Detailing, Methodologies and Construction Sequencing. Experience in Managing Consultant Coordination, RFIs, Drawing

CAD Designer- Precast EducationDiploma/Graduates in Civil EngineeringExperience2-3 years of relevant experience Roles and responsibilities Basic understanding and experience in Precast detailing with appropriate engineering knowledge. Ability to prepare drawings with high accuracy, good speed and clear presentation Proficiency in AutoCAD is mandatory Experience in Tekla structures will be advantageous. Ability to review drawings and prepare RFIs (Request for Information) in good English will be useful The qualities you will aim for is high accuracy, good speed and clear presentation of your drawings. You are expected to detail accurately, present clearly and submit on time as per the committ...

Identify the potential of the customer Understand the credit worthiness of customer Introduce our range of products & explain the qualitative advantages Involve seniors to close the deal Cold calls to construction sites Required Candidate profile DO NOT CONTACT RECRUITERS DIRECTLY ,APPLY ON NAUKRI AND RECRUITERS WILL GET BACK TO YOU

deciding which contracts to bid on and setting pricing and resource allocation strategies. Team Coordination: Assembling a cross-functional team, which may include subject matter experts, estimators, technical writers, and legal experts, Required Candidate profile to collaboratively work on the bid response Review and analyze the bid technical documents and requirements and identifies the scope of supply, configuration of the product with relevant options

Bachelor’s degree in Quantity Surveying, Civil Engineering, or a related field Minimum 5 years of experience in quantity surveying for precast construction projects Proficiency in reading technical drawings and BOQs Required Candidate profile Advanced knowledge of quantity surveying software and tools. Strong analytical, organizational, and communication skills. Knowledge of construction standards, codes, and regulations.

The Project Manager is responsible for the overall supervision of projects. Should demonstrate strong leadership qualities and be able to lead the team at site. The major focus of the Project Manager is ensuring projects are completed within the Required Candidate profile EXPERINCE SHOULD BE FROM PRECAST INDUSTRY allocated period of time and within the budget that has been assigned All types of drawings and thorough knowledge of MSP and SAP

The Project Manager is responsible for the overall supervision of projects. Should demonstrate strong leadership qualities and be able to lead the team at site. The major focus of the Project Manager is ensuring projects are completed within the Required Candidate profile EXPERINCE SHOULD BE FROM PRECAST INDUSTRY allocated period of time and within the budget that has been assigned All types of drawings and thorough knowledge of MSP and SAP

Prepares and presents project status reports to stakeholders planning of project time line of projects (Pre con to Post cons) with concern of Management / Engg Dept. / Consultants, & prepare the budget . Required Candidate profile Project Budgeting and Planning Monitoring & Coordination MIS & Reports Exp should be from Precast industry

Generate and Service new business leads for space discovery or interior design and build amongst institutional clients - legacy brands, SMEs, start-ups, and co/managed working spaces Exp of dealing with high profile clients like CEOs, CFOs, Founders. Required Candidate profile entrusted with strategizing, experimenting & scaling up a new business vertical with global impact and outreach. you will need to act as a CEO of your assigned area EXP SHOULD BE FROM PRECAST INDUSTRY

Should be Responsible for planning of project time line of projects (Pre con to Post cons) with concern of Management / Engr Dept./Consultants and prepare the budget get it approved by management and track the projects on planning timeline & budgets Required Candidate profile Prepared the Planning of the Projects & Budgets Preparation of Schedule, Bar Chart, Resources Allocation with M.S.Project, Schedule design Material Procurement Planning & Monitoring

Design Coordination Drawing Quality & Interface Management Production & Site Execution Support Quality Assurance & Compliance Process Improvement & Documentation Familiarity with local and international building codes related to precast construction. Required Candidate profile Minimum 7-12 years of exp in precast design coordination or structural design Strong background in precast building systems, including detailing, production constraints, and erection methodologies

Position: Senior Plant Engineer Precast Plant Location: Anjar, Gujarat Responsibilities: Supervise precast production of beams, steel structures, and concrete elements as per project requirements. Plan daily/weekly production schedules in coordination with project and site teams. Ensure quality standards, dimensional accuracy, and timely delivery of precast elements. Coordinate with design, quality, and logistics teams for smooth execution. Lead and guide plant engineers, supervisors, and workforce. Enforce safety protocols and best construction practices. Requirements: B.E./B.Tech (Civil/Mechanical). 48 years’ experience in precast production/construction plants (preferably large infrastruc...

vConstruct , a Pune based Construction Technology company seeks process-oriented individuals with academic or professional background in Civil Engineering/ Architectural/ Construction Management for the role of Rebar and Concrete Modeler. Key Responsibilities: Rebar and Concrete Modeler is accountable to create high quality deliverables and outputs on schedule, act independently to manage the assigned work and deliverables, work closely with Project lead and Project Coach to plan project implementation. Indicative responsibilities include: Carefully study project documents - drawings, details, RFIs and addendums. Identify missing information, discrepancies and constructability issues. Develo...

Identify the potential of the customer Understand the credit worthiness of customer Introduce our range of products & explain the qualitative advantages Involve seniors to close the deal Cold calls to construction sites _ builders & infrastructure Required Candidate profile Provide management sales, revenue, and reports, along with realistic forecasts. Recognize emerging markets and market trends while staying informed about new products and the competitive landscape

The role of a Mould Designer at the Precast Works Competency Centre (PWCC) within L&T Construction Group is pivotal in the advancement of precast concrete technology. The PWCC is dedicated to achieving excellence in skill, quality, and safety through the use of state-of-the-art technology and a proficient, efficient team. The primary goal of the PWCC is to establish new benchmarks in the field of precast concrete by ensuring cost-effective and timely execution of projects. By focusing on operational efficiency, fostering innovation, and integrating cutting-edge technologies, the PWCC contributes significantly to the long-term growth and strategic objectives of L&T Construction Group. As a Mo...

Design Engineer - Structures Gurgaon, India Do building structures fascinate you and do you enjoy discussions on technical topics related to structural engineering? If you enjoy simplifying difficult problems not just on your own projects but also to help others in your team, if you love taking up unprecedented challenges then we have this exciting opportunity for you to join our structures department as a Senior engineer. We are seeking a senior structural engineer who will be able to help us grow our design team in structures department with their technical expertise with having worked on overseas projects to international codes. You should have led buildings projects with multiple typolog...

Job Title: Precast Tekla Modeler Location: Mohali | Noida | Kolkata | Pune (On-site) Experience: 4+ Years Qualification: B.Tech / M.Tech in Civil Engineering or related field Job Description We are looking for an experienced Precast Tekla Modeler to join our growing team at Intelligent Consulting Engineers (ICE) . The ideal candidate will have strong expertise in Tekla Structures and hands-on experience in precast modeling and detailing . Required Skills & Experience 4+ years of precast drafting and Tekla modeling experience . Proficiency in Tekla Structures (Precast) . Knowledge of precast shop drawings, reinforcement, and assembly detailing . Strong understanding of precast construction pr...

Job Purpose: To plan, manage, and control the entire precast concrete production process (beams, columns, slabs, walls, pipes, boundary walls, etc.), ensuring timely delivery, quality compliance, cost efficiency, and safe operations. Key Responsibilities: Plan, schedule, and oversee daily production activities in the precast plant. Manage raw material planning (cement, aggregates, admixtures, reinforcement, etc.) in coordination with the procurement team. Ensure strict adherence to quality standards, mix designs, and project specifications in coordination with QA/QC. Supervise casting, curing, demolding, storage, and dispatch of precast products. Optimize manpower, equipment, and material ut...

Job Purpose: To lead the quality management system at the precast plant, ensuring that all concrete products (beams, columns, slabs, walls, pipes, boundary walls, etc.) meet company standards, client specifications, and international codes (IS/ASTM/BS/ACI). Key Responsibilities: Prepare and implement QA/QC procedures, ITPs, and checklists for precast production and installation. Supervise quality inspections for raw materials (cement, aggregates, admixtures, reinforcement steel, etc.) and finished precast elements. Monitor mix design, batching, casting, curing, demolding, storage, and dispatch processes for concrete products. Ensure compliance with IS 456, IS 9103, IS 1489, IS 383, ASTM/BS/A...