47 Pqr Jobs - Page 2

Job Description: Ability to accurately interpret manufacturing processes and drawings/graphics. The role involves review and approval of all welding documentation(WPSs, PQR s and WPQRs) to ensure compliance with Siemens welding specification You will plan, supervise, and document welding operations using relevant codes, drawings, or contracts Qualifications and Skills Bachelors in mechanical engineering Good knowledge of Fabrication Industry, Knowledge of welding, WPS, PQR, WPQ and NDT requirements Exp in Pressure vessel , heat exchanger, tanks , piping , valves , pumps and respective codes and standards related to material inspection, welding , heat treatment, dimension inspection, final hydro testing, Fabrication. Job Location:- CBD belapur.

NDT Level II - RT/UT/PT/MT is mandatory Experience in Pressure Vessel, Heat Exchanger, Structural Fabrication Inspection, Review WPS&PQR, Welding Knowledge, Piping, Machined Component, Valve, Flange, Material Inspection, Lube Oil System, Skid system

Petrofac is a leading international service provider to the energy industry, with a diverse client portfolio including many of the world’s leading energy companies, We design, build, manage and maintain infrastructure for our clients. We recruit, reward, and develop our people based on merit regardless of race, nationality, religion, gender, age, sexual orientation, marital status or disability. We value our people and treat everyone who works for or with Petrofac fairly and without discrimination, The world is re-thinking its energy supply and energy security needs; planning for a phased transition to alternative energy sources. We are here to help our clients meet these evolving energy needs, This is an exciting time to join us on this journey, We support flexible working requests and have adopted a hybrid approach for most of our office-based roles. We ask employees to be present in the office at least three days per week, Are you ready to bring the right energy to Petrofac and help us deliver a better future for everyone?. JOB TITLE: Principal Engineer – Quality (Welding/Coating). WORK LOCATION: Chennai Office. Key Responsibilities. Review procurement documents to ensure that Welding related requirements have been correctly translated into purchase requisitions and design documents, Develop, Review and approve Vendor & Site Sub-Contractor ITPs, QCPs, WPS and ITRs based on corporate standard, Coordinate with the customers representative on all quality Welding related matters, Coordinate for failure analysis and root cause analysis on welding related issues, Plan, conduct, track and report welding engineering investigations, Monitoring Welding Procedure and Welder Qualifications, Verify that the Welding related site activities are in accordance with the applicable codes and standards, Monitor and control of sub-contractor Welding repair rate, Participate in the internal and external site audits, Control all non-conformance reports related to welding and undertake remedial action, Review the customers specification and undertake relevant training to the site Welding inspectors, Monitor the implementation of the approved site QC Plan, Complete and coordinate the approval of the sites QC technical submittals related to Welding to the customer, Assure all technical welding documents relative to site quality control are current status, Report major welding issues to corporate quality which need to be circulated as a quality alert, Familiar with fabrication of topside and Jacket and DNV standards. Develop, review coating related ITPs, Check lists, procedures for both Supplier/Site QMS, Should have experience in offshore renewable energy projects. Supports coating acceptance testing, qualification testing, and troubleshooting efforts on assigned programs, Resolves technical issues as they arise during coating operations with assistance from manufacturer, engineering, and construction team; identifies root causes of the problems using analytical techniques; provides clear and concise corrective action reports, Essential Qualifications And Skills. Bachelor or Master’s degree in Mechanical or Metallurgy Engineering or equivalent, International Welding Engineer (IWE), CSWP 3.2.2, NDT PCN Level 2 certifications, Certified European Welding Engineer (preferred), Minimum 15 years’ experience as Welding Engineer preferably in Oil & Gas, Offshore projects with coating experience an added advantage, Should have previously worked with major EPC contractor, Preferred certified NACE CIP Level-3 Coating Inspector Or. Certified ICorr Level-2 Insulation Inspector, Additional Information. Show more Show less

Job Purpose Will work in Qualification Test lab for Pressure and load testing of Subsea & Surface products per specified industry standards Department: REMS Hyderabad. RESPONSIBILITIES: Executes and supports Product Qualification testing activities as Test Engineer. Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope. Develops Lab product/tool design, geometry standards documentation for product qualification requirements. Creates, reviews/approves part reports, drawings, engineering specifications and standards. Closely works with quality Engineer, product engineer, buyer, Project manager and all associated stakeholders. Supports and manage qualification project schedule and deliverables. Provides Management with technical assistance and work progress updates as requested. Mentors and provides technical guidance to Technicians. Works collaboratively to accomplish project tasks. Provides independent review of work packages. Provides vendors technical assistance and builds strong working relationships. Executes qualification per the requirements of industry code related to subsea production systems, TechnipFMC standards and client specifications, following the test procedures. Adheres to all relevant safe work instructions and design guidelines, Clearly demonstrates creativity and innovation in finding solutions and alternatives for shop floor issues and troubleshooting This is an individual contributor position. The role is responsible for executing activities assigned by the manager, and execute it with the assigned team. You are meant for this job if: Degreed Mechanical Engineer with at least 2/4-years of Engineering/qualification testing experience in the Subsea Production System engineering, reduced to 1/3-years for Masters candidates. Demonstrated experience in supporting qualification projects constrained by safety, quality, delivery, and cost requirements. Experience in reviewing Test procedures, documents, layouts, safety work plans and interpreting results of test. Work experience to include experience with various ASME, API, NORSOK, and DNV Codes and Standards as it relates to subsea equipment design and manufacturing. Exposure to various manufacturing processes - forging, hot and cold extrusion, cladding, HIP, induction bending etc Exposure to welding codes and practices - ASME IX and API 1104. Exposure to NDE codes and practices - UT, PAUT, PT, RT, MPI per ASME V. Accuracy, dependability, ability to manage schedule and prioritize work for self and others in team. Ability to work independently and as a part of a technical team - a self-motivated, self-starter. Strong written and verbal communication skills in English with ability to effectively transfer subject matter expertise. Ability to coach and mentor others. Leadership Competencies Act with Agility Adopt a Growth Mindset Problem Solving

Job Purpose Defines and executes engineering solutions within Seal Technology team. Acts in accordance with TechnipFMC standards, procedures and processes, with a continuous concern for quality, delivery targets, and customer satisfaction both internal and external. Works in a small team to develop new products and industrialize existing equipment for the Seal Technology product line. Engages with the entire value stream to ensure effective cost, manufacturing, and operation. Performs calculations and finite element analysis (FEA) to support design work. Presents to customers and multi-disciplined audiences. Creates prototypes of new products throughout the design process and evolution. Quickly identifies problems during execution and seeks help from sponsors when faced with struggles or unresolved issues. Regularly communicates project status and decisions with supervisors. Tracks spend, budget, and forecasted costs for personal projects. Maintains a personal schedule of projects and updates key stakeholders. Executes prototyping and final qualification testing in a shop/lab environment. Reports directly to the Seal Technology Value Stream NPD/PLM Team Lead/Engineering Manager. Qualifications: Bachelors Degree in Mechanical Engineering or applicable discipline, with 0-2 years of related experience (preferred). Additional Skills Focus on detailed mechanical design and qualification work with a sound understanding of engineering practices, design methods & calculations General understanding of economic factors (cost, profit, impact of decisions) affecting product developments along with knowledge of manufacturing, assembly, qualification, and test processes Able to read, interpret and prepare technical designs and documentation Able to work with a global team to solve and implement complex solutions into an existing product line Knowledge of API 6A/17D, preferred Able to meet deadlines and manage priorities Must have presentation and coaching skills Must be customer oriented Must be able to work collaboratively and effectively in a team setting

SUMMARY Knowledge of OHS related to welding Evaluate designs for welding requirements and ensure they meet structural integrity and quality standards Create and qualify PQR and WPS for different materials and weld techniques Design and develop modern welding systems Cobot, Robot Conversant with EN, ISO & ASME Codes. Identifying and resolving issues related to welding process and weld quality. Conducting process audit and process revalidation in defined frequency Requirements Qualified IWE Able to perform VT, PT, MPT, UT & radiography having ASNT level III certificate. Develop PQR and WPS Understanding the properties and behavior of different metals and alloys during welding. Hands on experience in various welding techniques, having experience in implementing welding automation projects Benefits Proactive weld quality improvement reducing weld related failures and rework. This will cover welding expertise in future business growth plans Build quality improvement

We are seeking a detail-oriented and experienced QA/QC Engineer to join our manufacturing team. The ideal candidate will be responsible for ensuring that our products meet the highest quality standards and comply with industry regulations. Key Responsibilities : Develop and implement quality control procedures and processes. Develop QAP / ITP with required procedures and get customer approvals for projects Conduct inspections and tests throughout the manufacturing process. Manage inspections with customers and TPI Manage quality team to ensure meeting orders CDD while ensuring all quality requirements are met with the highest standard Co-ordinate and expedite materials to ensure timely delivery of jobs, ensure receiving timely dispatch clearance from customers Prepare final documents and dossier sets and ensure customer approvals for final submissions Analyze data and prepare reports on quality metrics and trends. Identify areas for improvement in the production process and implement corrective actions. Collaborate with production teams to resolve quality issues and enhance product reliability. Ensure compliance with industry standards and regulatory requirements. Maintain documentation of quality assurance activities and audits like WPS PQR, calibration, etc. Managing audits by customers and various TPI agencies. Qualifications : Bachelors Degree in Mechanical Engineering or Diploma in Mechanical Engineering. Minimum of 10 years of experience in QA/QC within a manufacturing environment for pressure vessels or filters and strainers Experience in managing teams to ensure smooth work of the Quality department Strong knowledge of quality control methodologies and tools. Experience in working with customers such as IOCL, EIL, NTPC, NPCIL, BHEL, etc Proficient in using measuring and testing equipment. Familiarity with ISO standards and other relevant quality frameworks. Knowledge of ASME codes, material grades, welding process, painting & its testing requirement. NDT Level II in RT, DPT, MPT & UT. Able to review MTC with respective standard & specification. Strong communication and interpersonal skills. Ability to work effectively in a team environment.

Job Description Summary Looking for Welding Engineer with TIG Welding Experience in SS321 and INCO 625 Tubes and Sheets Job Description Company Overview : Working at GE Aerospace means you are bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team working to advance aerospace for future generations. If you have ideas, we will listen. Join us and see your ideas take flight! Site Overview: Our Multi-modal Manufacturing Facility (MMF) in Pune plays a crucial role in manufacturing key aerospace components, supporting not only Indias defense and commercial sectors but also global aviation supply chains. Our relationships with Indian suppliers, combined with our world-class local facilities and global reach, continue to shape Indias aerospace ecosystem Roles and Responsibilities: Welding of tubes, air manifolds and sheet metal parts. Welding of stainless steel, Inconel material. Repair of defective stainless steel and Inconel castings. Welding and fabrication by using TIG and Orbital welding processes. Ability to read, understand, analyze and interpret drawings, manuals, SOP, MOS and other material to determine finish product. Assembly of welded products. Shall be certified in welding process as per AWS D17.1 in 6G position with II A & III B materials. Shall have experience to produce X ray quality Class B weld joints, with SS 321 & Inconel 625 material Ideal Candidate: TIG Welding Experience in SS321 and INCO 625 Tubes and Sheets Required Qualifications: Diploma with minimum 2.5 years of experience in welding and fabrication. Highest Levels of Personal Integrity and Safety Mindset. Experience in engineering industry with firsthand experience of fabrication of tubes and ducts of aircraft engines. Ability to analyze problems, identify root causes and provide efficient solutions. Ability to handle diverse activities simultaneously and Ability to work in a matrix organization. Good oral and written communication skills Preferred Qualifications: Knowledge in welding machines usage and their accessories like welding positioners, Bevellers, Rollers, 3D welding tables, etc. Proficiency in welding technique. Experience in aviation industry. Knowledge of Lean and Six Sigma Methodology Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward. Additional Information Relocation Assistance Provided: No

Role & responsibilities 1. LSAW Production and Tooling Experience. 2. Knowledge of ASME Section IX 3. Knowledge of Welding 4. Review and preparation of various documents like Weld Map WPS-PQR 5. LSAW Production - Forming, Welding and Finishing section exp is must. 6. Welding Knowledge like SAW, GMAW, SMAW 7. Mechanical Expander Machine, Expander Tooling, Sizing Press machine, End Chapring Machine and Hydro Tester Machine. 8. Knowledge of International codes ASME & API, ISO 9. SAP Basic Knowledge. 10. Preparation all ISO / IMS and EHS documents and revising as and when required.

Ensure Qualification & deputation of qualified welder & Welding operators as per production Plan by Production Engineers. Preparation & Ensure compliance of Shop Weld & Test Plan Wed Map, WPS/PQR [As per ASME SEC IX and ISO 15614-1] etc.

Inspection of all fabrication outsourced components like casings, tanks, all sheet metal work. Vendor development ,approval, coordination with supplier for quality issues fabrication process such as cutting ,bending, drilling, shearing, grinding . Required Candidate profile Inspection of machining products Knowledge of welding, its processes ,weld defects Understanding of Drawings

Job Title: Quality Head Department: Production and Quality Department Qualification: Diploma Mechanical/B.E Mechanical Experience: 10+ years work experience Job Location: Sonawane Wasti, Chikhali, Pune Joining : Immediately Job Description:- 1. Experience in heavy machineries and fabrication. 2. Raw material inspection Review of test certificates with respect to standards & P.O. 3. Witnessing mechanical rest in laboratories Tensile, Impact, Hardness & Bend test. 4. Inspection of valves, pipes, fittings, pressure vessels, calandria, preheater, tanks, skids, tube bundles etc. 5. Review of radiographic films, witnessing ultrasonic tests, PT. 6. Witnessing of pressure testing of pipes, vessels & valves. 7. WPS, PQR review and approval, welder qualification rest witness. 8. Review of heat treatment charts/PWHT procedures. 9. Preparing the all documents related with quality & submitted to the customer. 10. Quality Management System (QMS) 11. Inspection and Testing 13. Compliance and Standards 14. Continuous Improvement: 15.Team Management 16.Supplier Quality Management 17. Customer Interaction 18.Documentation and Reporting 19. Risk Management 20. Training and Development 21.Working Conditions 22.Typically works in an Factory/ fabrication facility but may need to spend considerable time on the production floor/Vendors shop 23.Regular interaction with production staff, engineers, and senior management 24. May require occasional travel to supplier sites or customer locations. 25. Raw material inspection 26. Inspection of heavy fabrication 27. Welder qualification 28. NDT/WPS/PQR/WPQ 29. ASME standards 30. Raw Material Inspection & 3rd Party Inspection Kindly share your below details with updated resume on hr@rcmpl.co.in or wats app on 7391064889 with below details Current Designation Total Experience Current Salary Expected Salary Notice Period Job Location Your residency in Pune F2F interview availibilty Your Key skills Reason for Job Change

Responsible for oversee and manage welding projects from initiation to completion, ensuring adherence to quality and safety standards. Collaborate with fabrication, and quality control team, to optimize welding processes and resolve technical issues.

Job Summary: We are seeking a highly skilled and experienced Senior Engineer for welding department to join our team. The ideal candidate will have a strong background in welding processes, materials, and standards, with expertise in preparing welding qualification documents, WPS, PQR, and WPQ as per ASME and ISO standards. The candidate should possess excellent problem-solving skills, a deep understanding of mechanical and chemical testing of materials, and hands-on experience with welding machines and parameters. Key Responsibilities: Prepare and review Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and Welder Performance Qualifications (WPQ) as per ASME and ISO standards. Ensure compliance with relevant codes and standards for welding activities. Interpret engineering drawings and standards to finalize filler wires, welding parameters, and other welding-related specifications. Optimize welding processes to improve quality, efficiency, and cost-effectiveness. Conduct and oversee mechanical and chemical testing of materials to ensure compliance with project requirements. Analyze test data and provide recommendations for material selection and welding processes. Hands-on experience with welding machines and understanding of welding parameters. Troubleshoot welding equipment and process-related issues. Ensure welding activities meet quality standards and project specifications. Conduct audits and inspections to verify compliance with welding procedures. Collaborate with cross-functional teams, including design, production, and quality assurance, to ensure seamless project execution. Mentor and guide junior engineers and welding technicians. Identify and resolve welding-related issues during fabrication and production. Provide technical support for root cause analysis and corrective actions. Education: Bachelors degree in Mechanical Engineering or Metallurgical Engineering. CSWIP or AWS certification is a strong advantage Experience: Minimum 5 years of relevant experience in welding engineering. Proven experience in preparing WPS, PQR, and WPQ as per ASME and ISO standards. Hands-on experience with welding machines and parameters. Fabrication experience of Stainless steel, alloy steel, and aluminium alloys/ Technical Skills: Understanding of mechanical and chemical testing and properties of materials. Proficiency in interpreting engineering drawings and standards. Strong data analysis and reporting skills.

Must Have: Working Experience: EN 15085 Independent Welding Sequence Development Railway Product Experience Certification: CSWIP 3.1/IWT/IWE/AWS Responsibilities: Lead welding projects. Ensure proper implementation of welding procedures. Develop new welding processes (PQR/WPS) for GTAW, PAW. Conduct regular training for welders and shift supervisors. Manage welding consumables and procurement. Prepare technical reports and summaries. Conduct root cause analysis for repairs and maintenance investigations. Interested candidates can share their CV via WhatsApp at +91 9993096777.

Key Responsibilities: Welding Process Expertise: Oversee all aspects of welding processes, including pre-welding preparation, welding techniques, and post-welding inspection and treatment. Welding Procedure Development: Develop and maintain Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) in accordance with industry standards. Quality Control: Ensure the quality of welds meets established standards and specifications through inspection, testing, and review of welding records. Team Management: Supervise and mentor welding technicians and staff, providing training, guidance, and performance feedback. Resource Management: Manage welding equipment, consumables, and other resources to ensure efficient and cost-effective operation. Project Management: Support project managers in planning, scheduling, and executing welding-related tasks for valve production. Vendor Management: Evaluate and select welding vendors for outsourced work, ensuring quality and timely delivery. Safety Compliance: Implement and maintain safety procedures and protocols within the welding shop to ensure a safe working environment. Continuous Improvement: Identify and implement process improvements to enhance efficiency, reduce costs, and improve welding quality. Compliance: Compliance with ISO, API, ASME, AWS procedures and guidelines. Skills and Qualifications: Educational Background: Bachelor's degree in Welding Engineering, Manufacturing Engineering, or a related field (AWS) (IWE) or Certified Welding Engineer Experience: Proven experience in welding operations, preferably in a manufacturing environment, with a focus on valve production. Technical Skills: Expertise in various welding processes (e.g., MIG, TIG, SMAW), welding symbols, and engineering drawings. Quality Control: Knowledge of quality control procedures, inspection techniques, and relevant standards. Leadership and Management: Strong leadership, communication, and interpersonal skills to effectively manage a team. Problem-Solving: Ability to analyze welding problems, identify root causes, and implement corrective actions. Software Proficiency: Familiarity with welding software and project management tools.

Job Title: Welding and NDT Engineer Location: Kothrud, Pune & Vadodara, Gujarat Employment Type: Full-Time Experience: 2-5 Years (Freshers with relevant certifications may also apply) Job summary We are looking for a skilled Welding and NDT Engineer to join our growing team at Tecknowcon Services. The ideal candidate will be responsible for overseeing welding activities, conducting non-destructive testing (NDT), ensuring compliance with industry standards, and maintaining the highest levels of quality assurance and control across projects. Key Responsibilities Develop, review, and approve Welding Procedure Specifications (WPS), WPQR, and welder qualifications as per international standards (ASME, ISO, EN, etc.) Perform and supervise NDT methods including UT, RT, MT, PT, and VT Interpret NDT results and prepare detailed inspection and testing reports Ensure compliance with applicable codes and standards (ISO 3834, EN 1090, EN 15085, ASME) Conduct audits and quality checks at vendor and site locations Support training and qualification of welders and NDT personnel Qualifications & Skills: Degree/Diploma in Mechanical/Metallurgical Engineering Knowledge of welding standards and procedures (IWE/IWT preferred) Hands-on experience with welding inspections and NDT techniques Good understanding of QA/QC protocols Strong analytical and report-writing skills Willingness to travel for field/site inspections Benefits Exposure to domestic and international projects Opportunities for certification and skill development Dynamic and supportive work environment Competitive salary and travel allowances

Minimum 5 years of experience in Steel Structure Should have experience in structural fabrication NDT Level II in UT, RT, MT, PT QA/QC experience Knowledge of AWS D1.1 / IS Code

Preparation of QAP, Carryout stage wise and final inspection as per QAP Prepare & approve WPS & PQR, Welders Performance Qualifications as per ASME, EN, IBR and AWS standard Stakeholder Managemnet Required Candidate profile Prepare, approve Heat Treatment Procedure & independently carry out Heat Treatment activity Conduct QA audit in the house & at vendor places, Monitor QC & Welding processes on shop floor

Candidates who have worked in Similar Industry on Equipment Like Pressure Vessels, Heat Exchangers, Columns only shall apply. Profile: ASNT Level II (RT, PT, UT) Knowledge about inspection of fabrication & testing of equipment's like Pressure Vessels, Heat Exchangers, Condensers, Columns, Storage tank, Reactors. Awareness about ASME code sections related to construction of Pressure vessels. Knowledge of IBR & U Stamp requirements will be an added advantage. Review & follow of fabrication drawing, QA documents such as Quality Assurance Plan and inspection & testing procedures. Inspection of receiving raw material with respect to drawing, QAP & purchase order. Coordination with third party inspectors from TPI agencies for inspection Thorough Knowledge about welding processes and welding related documents like WPS, PQR, WPQ. Familiar with methods and usage of testing instruments like surface profile gauge, DFT meter, Ultrasonic thickness gauge, welding gauges & measuring instruments Witness of Non-destructive examinations & interpretation of results of NDE methods mainly LPT & RT. Notifying the Non-Conformance identified during inspection and recommending corrective & remedial actions. Conducting all stage wise & final Inspection activities with respect drawing, QAP & customer specifications. Preparing inspection reports as the QAP. Communication with clients, design department, production department.

Role & responsibilities Department: Quality Assurance Skill set: 1)QA- stability & Retain sample 2) Doc cell 3) QA Regulatory Designation: Officer/ Sr. Officer/ Executive/ Sr. Executive Education: M.Sc / B.Pahrma / M.Pharma Experience: 2 to 10 Department: OSD Packing Skill set: Operate and monitor primary packing machines such as blister packing, strip packing, and bottle packing machines.,Perform in-process checks like weight variation, visual inspection, and seal integrity. Designation: Officer/Executive Education: B.Pahrm/Diploma/ITI Experience: 2 to 10 years Department: CQA Skill set: 1) Doc Team (Candidates from QC background with LIMS handling experience can apply) 2) CQA compliance + Doc cell 3) Vendor management + Artwork 4) Loan license/ Third party Designation: Officer/ Sr. officer/ Executive/ Sr. Executive/ Assistant manager/ Manager Education: B.Pharma/M.Pharma/M.sc Experience: 2 to 16 years

Apply now » .buttontext67bbcd0b84b126cf a{ border1px solid transparent; } .buttontext67bbcd0b84b126cf a:focus{ border1px dashed #00a3e0 !important; outlinenone !important; } Currently at TechnipFMC? Apply here. Test Engineer II Location: Hyderabad, IN #job-location.job-location-inline {displayinline;} Employment type: Employee Place of work: Office Offshore/Onshore: Onshore .buttontext3b34abe12d83182e a{ border1px solid transparent; } .buttontext3b34abe12d83182e a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } .buttontexta77353c8ab1a0824 a{ border1px solid transparent; } .buttontexta77353c8ab1a0824 a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } TechnipFMC is committed to driving real change in the energy industry. Our ambition is to build a sustainable future through relentless innovation and global collaboration – and we want you to be part of it. You’ll be joining a culture that values curiosity, expertise, and ideas as well as diversity, inclusion, and authenticity. Bring your unique energy to our team of more than 20,000 people worldwide, and discover a rewarding, fulfilling, and varied career that you can take in anywhere you want to go. Job Purpose Will work in Qualification Test lab for Pressure and load testing of Subsea & Surface products per specified industry standards Department: REMS – Hyderabad. About The Role RESPONSIBILITIES: Executes and supports Product Qualification testing activities as Test Engineer. Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope. Develops Lab product/tool design, geometry standards documentation for product qualification requirements. Creates, reviews/approves part reports, drawings, engineering specifications and standards. Closely works with quality Engineer, product engineer, buyer, Project manager and all associated stakeholders. Supports and manage qualification project schedule and deliverables. Provides Management with technical assistance and work progress updates as requested. Mentors and provides technical guidance to Technicians. Works collaboratively to accomplish project tasks. Provides independent review of work packages. Provides vendors technical assistance and builds strong working relationships. Executes qualification per the requirements of industry code related to subsea production systems, TechnipFMC standards and client specifications, following the test procedures. Adheres to all relevant safe work instructions and design guidelines, Clearly demonstrates creativity and innovation in finding solutions and alternatives for shop floor issues and troubleshooting This is an individual contributor position. The role is responsible for executing activities assigned by the manager, and execute it with the assigned team. You are meant for this job if: Degreed Mechanical Engineer with at least 2/4-years of Engineering/qualification testing experience in the Subsea Production System engineering, reduced to 1/3-years for Masters candidates. Demonstrated experience in supporting qualification projects constrained by safety, quality, delivery, and cost requirements. Experience in reviewing Test procedures, documents, layouts, safety work plans and interpreting results of test. Work experience to include experience with various ASME, API, NORSOK, and DNV Codes and Standards as it relates to subsea equipment design and manufacturing. Exposure to various manufacturing processes - forging, hot and cold extrusion, cladding, HIP, induction bending etc Exposure to welding codes and practices - ASME IX and API 1104. Exposure to NDE codes and practices - UT, PAUT, PT, RT, MPI per ASME V. Accuracy, dependability, ability to manage schedule and prioritize work for self and others in team. Ability to work independently and as a part of a technical team - a self-motivated, self-starter. Strong written and verbal communication skills in English with ability to effectively transfer subject matter expertise. Ability to coach and mentor others. Leadership Competencies Act with Agility Adopt a Growth Mindset Problem Solving .buttontextb2a1d6d26c880f7c a{ border1px solid transparent; } .buttontextb2a1d6d26c880f7c a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } Being a global leader in the energy industry requires an inclusive and diverse environment. TechnipFMC promotes diversity, equity, and inclusion by ensuring equal opportunities to all ages, races, ethnicities, religions, sexual orientations, gender expressions, disabilities, or all other pluralities. We celebrate who you are and what you bring. Every voice matters and we encourage you to add to our culture. TechnipFMC respects the rights and dignity of those it works with and promotes adherence to internationally recognized human rights principles for those in its value chain. Learnmore about TechnipFMCand find other open positions by visiting ourCareer Page. Follow us onLinkedInfor company updates. Date posted: May 2, 2025 Requisition number: 12910 Apply now »