621 Powertrain Jobs - Page 11

Role & responsibilities Sets system-level TCP targets based on vehicle-level TCP targets: Takes inputs from CoEs/PPH/PMH on engineering/supplier/mfg/cost feasibility Takes inputs from Build & Validation COE for project risks on performance & reliability Takes inputs from PPM on planning/resource availability Ensures achievement of all system as well as vehicle-level TCP targets set, thereby ensuring: Timely release of drawings by CoEs after incorporating feedback on feasibility of Mfg/ Supplier/Service with minimal re-openings Evaluate feasible engineering solutions for timely closure of all ORCs/concerns raised by all support CoEs /labs Delivery of Process and Product targets (Performance, ...

As a Product Manager (Chassis) in the Aftermarket sector based in Pune, your key purpose is to execute the new product introduction process from end-to-end. Your tasks will involve creating and implementing timely regional product range development plans for the respective product line/s to achieve defined KPI targets derived from business and customer requirements in IAM and OES. You will act as the voice of the regional market to define product specifications and position the product in the correct customer segment for financial success. Additionally, you will coordinate regular visual and technical benchmarking of the product line against competitor offerings to provide input for the prod...

Having experience in D-space Python + Automation desk + dSPACE is a must for this role. You should be proficient in Control Desk and Automation Desk, with a strong knowledge in python scripting. The ideal candidate will have experience working in either Powertrain, body, chassis, ADAS for testing application software, including Unit testing, MIL, SIL, and HIL testing. Familiarity with tools like RTRT, Nunit, BTC Embedded Tester, System Test, Dspace HIL, ETAS HIL, and NI HIL is also required. Candidate should have hands-on experience in HIL testing, Dspace, Controls, and Python. Additional supported skills will be beneficial for this position.,

Having experience in D-space Python + Automation desk + dSPACE is a must for this role. You should be proficient in Control Desk and Automation Desk, with a strong knowledge in python scripting. The ideal candidate will have experience working in either Powertrain, body, chassis, ADAS for testing application software, including Unit testing, MIL, SIL, and HIL testing. Familiarity with tools like RTRT, Nunit, BTC Embedded Tester, System Test, Dspace HIL, ETAS HIL, and NI HIL is also required. Candidate should have hands-on experience in HIL testing, Dspace, Controls, and Python. Additional supported skills will be beneficial for this position.,

You have a great opportunity to join Kyyba INC as a Technical Recruiter / Staffing Specialist with a focus on Automotive and Engineering roles. This role is based in Bangalore, India, with a shift timing of 6 PM to 3 AM IST. Kyyba INC is looking to fill 12 immediate openings, and candidates with 1-2 years of technical recruitment experience for Manufacturing/Engineering roles are preferred. As a Technical Recruiter / Staffing Specialist at Kyyba INC, you will be responsible for hiring key roles such as Manufacturing / Process / Quality Engineers, Controls / Electrical / PLC Engineers, Powertrain / Calibration Engineers, and EV & Dyno Technicians. A background in Automotive and experience in ...

Develop and maintain Hardware-in-the-Loop (HIL) test systems using dSPACE tools. Validate automotive powertrain Electronic Control Units (ECUs) and related systems. Utilize CANoe, ControlDesk, AutomationDesk, and ConfigurationDesk for test execution and system integration. Create automated test scripts and perform debugging and failure analysis to ensure system reliability. Integrate MATLAB/Simulink models into HIL benches for comprehensive system testing. Nice to Have : Experience with Python or CAPL for test automation Familiarity with vehicle communication protocols (CAN, LIN, FlexRay, Ethernet) Knowledge of powertrain systems and automotive standards (ISO 26262, ASPICE) Hands-on experien...

Project Role : Technology Support Engineer Project Role Description : Resolve incidents and problems across multiple business system components and ensure operational stability. Create and implement Requests for Change (RFC) and update knowledge base articles to support effective troubleshooting. Collaborate with vendors and help service management teams with issue analysis and resolution. Must have skills : Cisco Identity Services Engine (ISE) Good to have skills : NAMinimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Technology Support Engineer, you will engage in resolving incidents and problems across various business syste...

We at Tata Elxsi hiring Engineers with 7-10 yrs experience in below skills for Trivandrum location. Please apply if interested. Experience in testing of engine & transmission controller ECUs Experience Petrol variant & Hybrid variant engines BOSCH ECUs specifically dSPACE HILS experience & calibration using INCA Experience in OBD-2 Engine diagnostic knowledge.

3 to 12 years of related experience in Automotive Parts / Component Design 3+ yrs exp in Designing Automotive Upperbody/ Underbody / Closures GSM /Side body outer/ inner, doors, / closures / Steering & wheel ends / Brakes / Driveshaft & Clutches / Seating Parts Knowledge on different types of materials, manufacturing processes, Engineering automotive standards. Good Hands on experience in CAD and Design Tools Should have experience in DFx ( Design for Mfg, assembly & Serviceability) Good communications skills, Analytical skills, Negotiation skills, liaison skills

Role & responsibilities Must: Engine design exp in must Creation of 3D design and detailed drawing using CAD tool. Strong communication and quality deliverable to meet KPI. Demonstrate problem solving and technical feasibility using engineering judgment. Working across cross functions teams to ensure collaboration for shared goals. Strong interpretation of GD&T, cost aspect and manufacturing process. Preferred candidate profile Hands on experience in 3D design tool like would be preferred Creo SAP, ERP PLM/Windchill GD&T Expertise in casting in Creo.

You are passionate about sustainable powertrains with a drive to explore new technologies and find synergies in developing the best complete product for our customers. You are a people person with a positive mindset, a can-do attitude, ability to see opportunities and courage to challenge. You have a structured approach, can quickly find common ground and solutions and you make your recommendations and decisions based on qualitative facts. You are an inspiring leader who cultivates and drives innovation and engagement through collaboration, teamwork and people development. You hold minimum a masters degree in engineering You are skilled in Project Management and QDCFS has no secret for you, ...

Looking for an R&D Engineer with experience in EV systems. Role includes designing wiring harnesses, integrating batteries and powertrain components, and conducting electrical system testing and validation.

SUMMARY We have an Excellent Opportunity for Male Candidates for Automobile Technician Role. About Client: Our Client is an Indian multinational ride-sharing company, It also operates in other business verticals including financial services and cloud kitchens. Role: Automobile Technician Roles and Responsibilities: - 1. Customer Handling Receiving customer with smile and greet him with Politeness, courteousness and professionalism Verify the service requests made by customers & Capture VOC of the customer and update in the system Conversational skill for telephonic as well as face to face discussion Customer communications about repair updates 2. Diagnosis Analyse and Diagnose the Scooter to...

Role & responsibilities: Should have experience in building Automotive assembly (Trim body / Powertrain), Experience in modeling (2D & 3D) and connections is a must Having experience in building Trimbody subsystem models (BIP/Closures/IP & Console/Seating) or Powertrain (Engine/Exhaust/Driveline/Transmission) is essential Perform modal analysis using Nastran/Optistruct (Sol103,Sol111) Able to debug the model and generate runnable models. Should have good verbal and written communication skills. Tools : Hypermesh / Ansa, Nastran / Optistruct

Tool: CatiaV5 (Preferred) Required Skills: Engine Application Job Description: Hands on experience in CATIA application. Having good knowledge of Engine and its subsystem packaging & integration on MHCV vehicle models. Experience in Layout preparation and detailed design of cooling, air intake and exhaust system. Domain knowledge in Engines and its subsystems design like engine architecture & design of engine components such as structural parts, crank train parts, belt and gear drives, lubrication systems, pumps, etc. Experience in Engine packaging sign off on vehicles and auxiliaries packaging sign offs on engine. Experience in Proto and serial production parts development with vendor devel...

Develop thermal models for EV powertrain components (motors, inverters, batteries). Simulate heat transfer, cooling systems, and thermal management strategies. Analyze simulation data to optimize thermal performance and efficiency. Validate models with physical testing and real-world data. Collaborate with design teams to integrate thermal solutions. Required Skills & Qualifications : Bachelor s/master s in mechanical, thermal, or automotive engineering. Expertise in thermal dynamics, heat transfer, and EV systems. Proficiency in CFD tools (ANSYS Fluent, COMSOL) and MATLAB/Simulink. 8+ years in thermal simulation for EV powertrains or related fields. Strong analytical and cross-functional co...

Take the opportunity to join the exciting journey to create future, sustainable powertrains for our customers as well as the future working place for our employees. Were looking for a group manager for our Project Management team within Powertrain Engineering. This is us, your new colleagues at PE, Powertrain Engineering We stand in front of significant challenges - where reducing transport emitted CO2 emissions is one of the biggest - and have transformed over the past years by simplifying and empowering our organization and way of working. As an integrated part of this we have high expectations to reduce development time and cost and drive innovation and employee engagement Responsibilitie...

Although the role category specified in the GPP is Hybrid, the requirement is for Onsite. Key Responsibilities Investigate and resolve product design issues within Value Package Introduction (VPI), Product Preceding Technology (PPT), or Value Package Change Request (VPCR) programs. Create and refine CAD models, drawings, and specifications using tools such as CREO, following internal standards and practices. Support and lead the application of engineering tools such as DFMEA, GD&T, tolerance stack-up analysis, and DVA. Collaborate across disciplines to drive design intent through effective design reviews and documentation. Conduct product-level design assessments and optimization for functio...

The Senior Technical Trainer supports the planning, design, and delivery of training and development programs related to Cummins engine systems and diagnostic tools. This role combines deep technical expertise in engine technologies with instructional design and facilitation skills to enhance workforce capabilities. The ideal candidate will have extensive experience in engine diagnostics, fuel systems, and electronic control systems, and will work closely with internal teams, vendors, and educational institutions to deliver impactful learning experiences. Key Responsibilities Design and develop instructional content aligned with Cummins standards, including participant guides, instructor mat...

Position Name: EV Buyer (Senior Manager) Years of Experience: 3-8 years Qualification: Bachelor's Degree or other Purpose of the Position This position is responsible for a market scouting of electric vehicle components & supplier portfolio of the EV components, costs evaluations, sourcing and supplier nomination process for the EV components. Next ensure and manage procurement activities related to capacity planning, evaluating change requests, issuing contracts, issuing orders (tools and components), tracking parts. Ensuring activities are carried out in accordance with the VW group's procurement processes. Check and negotiate cost optimization during an entire project lifecycle. Work Prof...

The Role We are seeking a highly skilled and motivated Mechanical Design Engineer to join our Electrification team, focusing on the design and development of inverter systems and sub-assemblies. This role requires a strong foundation in mechanical design principles, with proven experience in inverter component design, GD&T, creepage and clearance analysis, and tolerance stack-up. The ideal candidate will be proficient in 3D CAD tools (3Dx) and capable of delivering robust, innovative, and manufacturable solutions in a fast-paced environment. Key Responsibilities Lead the mechanical design of inverter assemblies and components from concept through to production. Apply Geometric Dimensioning &...

The Role: We are seeking a highly motivated and detail-oriented Requirements Engineer to join our Electric Drive Unit (EDU) team, with a focus on cooling and lubrication systems. The ideal candidate will have experience in Traceable Requirements Management (TRM) and a strong understanding of electric powertrain systems. This role is critical in defining, managing, and validating system requirements to ensure the successful development and integration of cooling and lubrication components within the EDU. Key Responsibilities: Define and manage system and component-level requirements for EDU cooling and lubrication systems. Utilize Traceable Requirements Management (TRM) tools to capture, trac...

About the Team: Quality Team plays a crucial role in producing components for automobiles. It helps Cost reduction, Identify the issues, Maintaining the supply chain, improve the product quality, Sustainability & etc. What you can look forward to as Lead/AM - Process Quality (m/f/d): 6 to 10 years of experience in quality assurance department Experience in machining & assembly processes, CNC machining, VMC and HMC, Machining process and Power Train Components Hands-on working experience with IATF core tools such as SPC, FMEA, APQP, PPAP, MSA, etc. Internal Certified Auditor for IATF 16949:2016 VDA 6.3 process auditor Your Profile as Lead/AM - Process Quality (m/f/d): Enhance customer satisfa...

You should be a BE/Diploma graduate in Mechanical, Industrial, or Automotive field with a minimum of 2-6 years of experience in Automotive subsystems. The ideal candidate will have expertise in Body in white, interiors, powertrain, and harness engineering within the product development domain. It is essential to possess knowledge of automotive standards and a proven track record of turning concepts into tangible products. Proficiency in CAD, CAM, and PLM tools is necessary for this role. If you meet these criteria, please submit your comprehensive resume to info@nova-global.in.,

You will be responsible for identifying and pursuing new business opportunities, building strong relationships with key stakeholders of potential customers, and conducting market research on products from planning to execution. Additionally, you will work with internal teams to develop business plans and strategies to achieve business goals, provide sales support by developing materials and presentations, and representing the company at industry events. Collaboration with cross-functional teams to execute projects within given timelines is essential, along with tracking the performance of business development efforts and making recommendations for improvement. As a Key Account Manager, you w...