790 Power Distribution Jobs - Page 3

The Flight Line Electrical Technician will perform technical interventions to ensure the H125 Aircraft s electrical systems are in full compliance. This role focuses on electrical systems including avionics, wiring, power generation, and troubleshooting. The technician is responsible for preparing the aircraft for both ground and flight activities, ensuring that all electrical components are functioning correctly before and after flight tests. Key Responsibilities: Prepare the Aircraft: Ensure the aircrafts electrical systems are fully operational and ready for ground and flight activities. Install or remove electrical sub-assemblies of the aircraft systems on the runway. Set electrical sub-assemblies, wiring, and related components in place on the runway. System Maintenance & Compliance: Perform preventive maintenance and re-compliance of the aircrafts electrical systems following ground or flight tests. Diagnose, troubleshoot, and repair anomalies in the electrical, avionics, and power distribution systems on the runway. Correct or repair simple electrical defects in aircraft systems, ensuring all systems meet operational requirements. Support during Flight Operations: Provide technical assistance during fixed points related to electrical systems as required. Assist with the aircraft s reception after flight, ensuring all electrical systems are properly assessed. Aid in engine operations, including electrical connections during engine start, shutdown, and engine runs. Documentation & Input Handling: Review and interpret electrical plans, schematics, and technical documents such as the logbook, Airnav, workshop files, and operating instructions. Ensure proper record-keeping of maintenance activities, especially electrical system interventions and compliance checks. Skills & Qualifications: Electrical Expertise : Exceptional knowledge of electrical systems, wiring diagrams, avionics, and electrical power generation systems in helicopters. System Troubleshooting : Ability to diagnose and resolve electrical system issues efficiently, including power distribution, avionics, and wiring defects. Technical Reading Skills : Proficient in reading and interpreting electrical plans, wiring diagrams, and schematics. Knowledge of Aircraft Maintenance : Familiarity with aircraft maintenance practices and technical documents related to electrical systems, such as logbooks, Airnav, and operating instructions. Flight Line Experience : Experience working on the flight line, understanding aircraft assembly, and operations in an aerospace environment. Work Under Pressure : Ability to work under pressure to resolve urgent electrical system issues during flight tests or ground operations. Desired Experience: Previous experience working with H125 or similar helicopter models is preferred. Extensive familiarity with aircraft electrical configurations, wiring, avionics, and integration procedures. Prior experience in a similar flight line electrical maintenance role is a plus.

Job Overview BU / FUNCTION DESCRIPTION Power Solution engineering team in D&D is responsible for development of innovative power interconnection solution products which are used in the hyperscale computer, AI, Datacenter, Cloud server, and other IT system, including connector and cable assembly. Role Objective: Manage the complete product development life cycle (starting from voice of customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution & Sustenance till product end of life) Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), make engineering evaluation/proposal to customer. Maintain a System level understanding of customer application and the cable design/concept necessary for providing a solution to the customers expectation. Follow LEANPD Project Process to support project team from PDE perspective to complete Project (NPI or Sustaining) on time, quality and budget. Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained. Technical support to customer, sales, PM and plant team. Conduct necessary test, engineering analysis, trouble shooting and verification. Work with global manufacturing resources, procurement, and outside suppliers to meet all TE technical, quality, and cost objectives Introduce breakthrough technologies by partnering technically with our customers worldwide and with our TE Global competency centers to enhance business revenue & growth. Apply engineering best practice to reduce cost and sustain exiting products to meet customer s cost targets. Skills and Experiences: Bachelor degree (Mechanical) required and Master is preferred Knowledge about various phases of product realization and product development Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modelling, Geometric Dimension & Tolerancing (GD&T), electrical & electronic design and Simulation Basic knowledge in manufacturing process (machining, molding, stamping, plating, etc.) will be a plus. Basic knowledge in material (metal/plastic) properties will be a plus. Knowledge of power distribution system and connection components. Familiarity with power safety standards and agency approval of power connector/cable/cable assembly. Basic FEA simulation on mechanical, mold-flow, and Thermal. Familiarity with quality tools (FMEA, 6sigma, DOE, 8D ) will be a plus. CRITICAL EXPERIENCE 10+ years working experience as new product development related position and 5+ years of working experience on product developing of connector\cable\cable assembly. Connector, especially Power/Industrial/Auto connector design background will be a plus. Experience on power distribution inter/intra system is required. This position is highly technical and requires an individual who can work independently. Experience on product compliance certification (Product, Safety, Environment substance control) Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM) COMPETENCIES Application EngineeringAbility to understand customer requirements & offer engineering solutions Engineering management across cross functional teamsDeveloping technical roadmaps to align with market direction & communicating it across business units, management & customers to share applicable technology Working together with global team. Optimizing engineering & innovationDefining & managing IP strategy & constantly improving products through R&D Quick learning capabilityAcquire the necessary skill set, assuring succession & phase in the organization, procedure and culture. Quality controller Ability to assure quality for services, documents and prints. Good presentation skills with usage of PowerPoint Location

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivity's Supplier Development Teams find and develop suppliers to support the strategic sourcing organization in driving incremental performance in supplier quality, delivery, price and service. They teach new suppliers on how to work with TE (portal access, e-procurement tool usage, TE procedures, etc.). They extend TE Operational Advantage into the supply base to generate continuous improvement in the extended value stream, deliver incremental improvements through supplier development lead projects and achieve improvement targets specific for supplier development. They also help drive selection and development of the best total cost supply option in the region where the commodity or service is consumed. They keep abreast of emerging market options and inform the broader procurement organization of trends and new supply options. Responsibility: Electrical circuit & PCB design and optoelectronic component selection. Prototype development and evaluation Definition and/or Development of test systems for opto-electronic products Definition and coordination of test programs for purposes of design verification and product qualification Serve as liaison between Business Development, Marketing, Sales, Procurement, Manufacturing, contract design teams, customers, suppliers, and various other Engineering functions Generation of product drawings, application specifications, and instruction sheets Implementation of design changes to enhance product quality, improve manufacturability, and/or reduce manufacturing cost Review functional/performance specifications provided by customers and ensure that product requirements have been properly defined and documented prior to production. Perform/coordinate failure analysis work and determine corrective actions Initiation of Engineering Changes to improve designs, improve manufacturing, or respond to changes requested by the customer Achieve scope, schedule, and budget requirements Report out on project status as needed Meet all established project deadlines Regularly keep management informed of problems, issues, and status of on-going projects. Work with local and global counterpart / stake holder for ensuring quality deliverable and project execution. Work closely with third party vendor / supplier to define the technical requirements for the product and project execution. Mentor the new team members on design and development of opto-electronics products Desired Candidate Profile: Education/ Knowledge: BE/BTech with specialization in Electronics & Communications Engineering Min 3 years of experience in Electronics board design and development for aerospace/ automotive/industrial applications Critical experience: Electronics hardware design for industrial, defense, automotive and aerospace applications Experience with optical transceivers with associated electronics hardware design Capable of High-Speed RF and/or Mixed Signal hardware Circuit Schematic and PCB layout Design and analysis Experience with Ethernet, Fiber Channel, Infiniband, and Rapid I/O standards Familiar with the SMPTE and DVI/HDMI video standards and protocols like I2C and SPI Experience with BERT testing and eye diagram analysis of opto-electronic devices and transceivers is a plus. Experience in embedded control hardware design for power electronics applications such power distribution units (PDU), motor drivers, smart power switching will be added advantage Experience with standard test equipment such as oscilloscopes, power meters, logic analyzers, signal/spectrum analyzers, etc. Experience with EMI/EMC requirements, qualification processes and electronics documentation Familiar with RF Microwave design and use of ADS, Sonnet and HFSS software will be an added advantage Familiar with software development and tools will be an added advantage Competencies EOE, Including Disability/Vets

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivitys R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. They are responsible for product development, and qualification from market definition through production and release; assist in the qualification of suppliers for new products to ensure suppliers deliver quality parts, materials, and services for new or improved manufacturing processes; conduct feasibility studies, testing on new and modified designs; direct and support detailed design, testing, prototype fabrication and manufacturing ramp. The R&D/Product Development Engineering Teams provide all required product documentation including, but not limited to, Solid Model, 2D/3D production drawings, product specifications, and testing requirements. They create and modify detailed drawings and drafting or conceptual models from layouts, rough sketches or notes and contribute to design modifications to facilitate manufacturing operation or quality of product. Typical fields of expertise includematerials, mechanics and systems, electrical, optics, chemistry, software, automation systems, packaging, testing and measurement, and manufacturing of electrical, mechanical and electronic components, products, and their integration into systems. Roles & Responsibilties: BU / FUNCTION DESCRIPTION Power Solution engineering team in D&D is responsible for development of innovative power interconnection solution products which are used in the hyperscale computer, AI, Datacenter, Cloud server, and other IT system, including connector and cable assembly. ROLE OBJECTIVE Responsible for Power cable assembly product development, which are used for data communication or Hyperscale computer. Provide customer innovation solution as well as manage the engineer documents following TE system procedure. RESPONSIBILITIES Manage the complete product development life cycle (starting from voice of customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution & Sustenance till product end of life) Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), make engineering evaluation/proposal to customer. Maintain a System level understanding of customer application and the cable design/concept necessary for providing a solution to the customers expectation. Follow LEANPD Project Process to support project team from PDE perspective to complete Project (NPI or Sustaining) on time, quality and budget. Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained. Technical support to customer, sales, PM and plant team. Conduct necessary test, engineering analysis, trouble shooting and verification. Work with global manufacturing resources, procurement, and outside suppliers to meet all TE technical, quality, and cost objectives Introduce breakthrough technologies by partnering technically with our customers worldwide and with our TE Global competency centers to enhance business revenue & growth. Apply engineering best practice to reduce cost and sustain exiting products to meet customers cost targets. Education and Experiences: EDUCATION/KNOWLEDGE Bachelor degree (Mechanical) required and Master is preferred Knowledge about various phases of product realization and product development Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modelling, Geometric Dimension & Tolerancing (GD&T), electrical & electronic design and Simulation Basic knowledge in manufacturing process (machining, molding, stamping, plating, etc.) will be a plus. Basic knowledge in material (metal/plastic) properties will be a plus. Knowledge of power distribution system and connection components. Familiarity with power safety standards and agency approval of power connector/cable/cable assembly. Basic FEA simulation on mechanical, mold-flow, and Thermal. Familiarity with quality tools (FMEA, 6sigma, DOE, 8D) will be a plus. CRITICAL EXPERIENCE 10+ years working experience as new product development related position and 5+ years of working experience on product developing of connector\cable\cable assembly. Connector, especially Power/Industrial/Auto connector design background will be a plus. Experience on power distribution inter/intra system is required. This position is highly technical and requires an individual who can work independently. Experience on product compliance certification (Product, Safety, Environment substance control) Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM) COMPETENCIES Application EngineeringAbility to understand customer requirements & offer engineering solutions Engineering management across cross functional teamsDeveloping technical roadmaps to align with market direction & communicating it across business units, management & customers to share applicable technology Working together with global team. Optimizing engineering & innovationDefining & managing IP strategy & constantly improving products through R&D Quick learning capabilityAcquire the necessary skill set, assuring succession & phase in the organization, procedure and culture. Quality controllerAbility to assure quality for services, documents and prints. Good presentation skills with usage of PowerPoint

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivitys R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. They are responsible for product development, and qualification from market definition through production and release; assist in the qualification of suppliers for new products to ensure suppliers deliver quality parts, materials, and services for new or improved manufacturing processes; conduct feasibility studies, testing on new and modified designs; direct and support detailed design, testing, prototype fabrication and manufacturing ramp. The R&D/Product Development Engineering Teams provide all required product documentation including, but not limited to, Solid Model, 2D/3D production drawings, product specifications, and testing requirements. They create and modify detailed drawings and drafting or conceptual models from layouts, rough sketches or notes and contribute to design modifications to facilitate manufacturing operation or quality of product. Typical fields of expertise includematerials, mechanics and systems, electrical, optics, chemistry, software, automation systems, packaging, testing and measurement, and manufacturing of electrical, mechanical and electronic components, products, and their integration into systems. Roles and Responsibilities: BU / FUNCTION DESCRIPTION Power Solution engineering team in D&D is responsible for development of innovative power interconnection solution products which are used in the hyperscale computer, AI, Datacenter, Cloud server, and other IT system, including connector and cable assembly. ROLE OBJECTIVE Responsible for Power cable assembly product development, which are used for data communication or Hyperscale computer. Provide customer innovation solution as well as manage the engineer documents following TE system procedure. RESPONSIBILITIES Manage the complete product development life cycle (starting from voice of customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution & Sustenance till product end of life) Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), make engineering evaluation/proposal to customer. Maintain a System level understanding of customer application and the cable design/concept necessary for providing a solution to the customers expectation. Follow LEANPD Project Process to support project team from PDE perspective to complete Project (NPI or Sustaining) on time, quality and budget. Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained. Technical support to customer, sales, PM and plant team. Conduct necessary test, engineering analysis, trouble shooting and verification. Work with global manufacturing resources, procurement, and outside suppliers to meet all TE technical, quality, and cost objectives Introduce breakthrough technologies by partnering technically with our customers worldwide and with our TE Global competency centers to enhance business revenue & growth. Apply engineering best practice to reduce cost and sustain exiting products to meet customers cost targets. Experience: Bachelor degree (Mechanical) required and Master is preferred Knowledge about various phases of product realization and product development Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modelling, Geometric Dimension & Tolerancing (GD&T), electrical & electronic design and Simulation Basic knowledge in manufacturing process (machining, molding, stamping, plating, etc.) will be a plus. Basic knowledge in material (metal/plastic) properties will be a plus. Knowledge of power distribution system and connection components. Familiarity with power safety standards and agency approval of power connector/cable/cable assembly. Basic FEA simulation on mechanical, mold-flow, and Thermal. Familiarity with quality tools (FMEA, 6sigma, DOE, 8D) will be a plus. CRITICAL EXPERIENCE 10+ years working experience as new product development related position and 5+ years of working experience on product developing of connector\cable\cable assembly. Connector, especially Power/Industrial/Auto connector design background will be a plus. Experience on power distribution inter/intra system is required. This position is highly technical and requires an individual who can work independently. Experience on product compliance certification (Product, Safety, Environment substance control) Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM) COMPETENCIES Application EngineeringAbility to understand customer requirements & offer engineering solutions Engineering management across cross functional teamsDeveloping technical roadmaps to align with market direction & communicating it across business units, management & customers to share applicable technology Working together with global team. Optimizing engineering & innovationDefining & managing IP strategy & constantly improving products through R&D Quick learning capabilityAcquire the necessary skill set, assuring succession & phase in the organization, procedure and culture. Quality controllerAbility to assure quality for services, documents and prints. Good presentation skills with usage of PowerPoint

Job Overview BU / FUNCTION DESCRIPTION Power Solution engineering team in D&D is responsible for development of innovative power interconnection solution products which are used in the hyperscale computer, AI, Datacenter, Cloud server, and other IT system, including connector and cable assembly. Role Objective: Manage the complete product development life cycle (starting from voice of customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution & Sustenance till product end of life) Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), make engineering evaluation/proposal to customer. Maintain a System level understanding of customer application and the cable design/concept necessary for providing a solution to the customers expectation. Follow LEANPD Project Process to support project team from PDE perspective to complete Project (NPI or Sustaining) on time, quality and budget. Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained. Technical support to customer, sales, PM and plant team. Conduct necessary test, engineering analysis, trouble shooting and verification. Work with global manufacturing resources, procurement, and outside suppliers to meet all TE technical, quality, and cost objectives Introduce breakthrough technologies by partnering technically with our customers worldwide and with our TE Global competency centers to enhance business revenue & growth. Apply engineering best practice to reduce cost and sustain exiting products to meet customer s cost targets. Skills and Experiences: Bachelor degree (Mechanical) required and Master is preferred Knowledge about various phases of product realization and product development Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modelling, Geometric Dimension & Tolerancing (GD&T), electrical & electronic design and Simulation Basic knowledge in manufacturing process (machining, molding, stamping, plating, etc.) will be a plus. Basic knowledge in material (metal/plastic) properties will be a plus. Knowledge of power distribution system and connection components. Familiarity with power safety standards and agency approval of power connector/cable/cable assembly. Basic FEA simulation on mechanical, mold-flow, and Thermal. Familiarity with quality tools (FMEA, 6sigma, DOE, 8D ) will be a plus. CRITICAL EXPERIENCE 10+ years working experience as new product development related position and 5+ years of working experience on product developing of connector\cable\cable assembly. Connector, especially Power/Industrial/Auto connector design background will be a plus. Experience on power distribution inter/intra system is required. This position is highly technical and requires an individual who can work independently. Experience on product compliance certification (Product, Safety, Environment substance control) Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM) COMPETENCIES Application EngineeringAbility to understand customer requirements & offer engineering solutions Engineering management across cross functional teamsDeveloping technical roadmaps to align with market direction & communicating it across business units, management & customers to share applicable technology Working together with global team. Optimizing engineering & innovationDefining & managing IP strategy & constantly improving products through R&D Quick learning capabilityAcquire the necessary skill set, assuring succession & phase in the organization, procedure and culture. Quality controller Ability to assure quality for services, documents and prints. Good presentation skills with usage of PowerPoint Location

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivity's Supplier Development Teams find and develop suppliers to support the strategic sourcing organization in driving incremental performance in supplier quality, delivery, price and service. They teach new suppliers on how to work with TE (portal access, e-procurement tool usage, TE procedures, etc.). They extend TE Operational Advantage into the supply base to generate continuous improvement in the extended value stream, deliver incremental improvements through supplier development lead projects and achieve improvement targets specific for supplier development. They also help drive selection and development of the best total cost supply option in the region where the commodity or service is consumed. They keep abreast of emerging market options and inform the broader procurement organization of trends and new supply options. Responsibility: Electrical circuit & PCB design and optoelectronic component selection. Prototype development and evaluation Definition and/or Development of test systems for opto-electronic products Definition and coordination of test programs for purposes of design verification and product qualification Serve as liaison between Business Development, Marketing, Sales, Procurement, Manufacturing, contract design teams, customers, suppliers, and various other Engineering functions Generation of product drawings, application specifications, and instruction sheets Implementation of design changes to enhance product quality, improve manufacturability, and/or reduce manufacturing cost Review functional/performance specifications provided by customers and ensure that product requirements have been properly defined and documented prior to production. Perform/coordinate failure analysis work and determine corrective actions Initiation of Engineering Changes to improve designs, improve manufacturing, or respond to changes requested by the customer Achieve scope, schedule, and budget requirements Report out on project status as needed Meet all established project deadlines Regularly keep management informed of problems, issues, and status of on-going projects. Work with local and global counterpart / stake holder for ensuring quality deliverable and project execution. Work closely with third party vendor / supplier to define the technical requirements for the product and project execution. Mentor the new team members on design and development of opto-electronics products Desired Candidate Profile Education/ Knowledge: BE/BTech with specialization in Electronics & Communications Engineering Min 3 years of experience in Electronics board design and development for aerospace/ automotive/industrial applications Critical experience: Electronics hardware design for industrial, defense, automotive and aerospace applications Experience with optical transceivers with associated electronics hardware design Capable of High-Speed RF and/or Mixed Signal hardware Circuit Schematic and PCB layout Design and analysis Experience with Ethernet, Fiber Channel, Infiniband, and Rapid I/O standards Familiar with the SMPTE and DVI/HDMI video standards and protocols like I2C and SPI Experience with BERT testing and eye diagram analysis of opto-electronic devices and transceivers is a plus. Experience in embedded control hardware design for power electronics applications such power distribution units (PDU), motor drivers, smart power switching will be added advantage Experience with standard test equipment such as oscilloscopes, power meters, logic analyzers, signal/spectrum analyzers, etc. Experience with EMI/EMC requirements, qualification processes and electronics documentation Familiar with RF Microwave design and use of ADS, Sonnet and HFSS software will be an added advantage Familiar with software development and tools will be an added advantage Competencies EOE, Including Disability/Vets Location

Generating Business from Existing and new Customer for products like LV Panel,LV Switchgear, Panels, Bus Ducts, MCC, PCC, Power Distribution Panels, Siemens Automation, PLC, SCADA, Drives Required Candidate profile Responsible for offer making,Payment Collection,business growth, Customer Feedback and support, Sound Knowledge of Automation & Drives and LV Panel

8.0 + Years with Electrical design engineering with BIM experience. Educational Qualification Four-year Technical degree BE Electrical Engineering SKILL / TOOLS KNOWLEDGE REQUIRED Revit MEP, Auto CAD, Navisworks Manage, Dialux evo, Visual, Elum, SKM, ETAP, MS Office MUST REQUIRED SKILLS Proficient in Data Center Design in Europe & USA, Revit, Auto CAD, Navisworks Manage, Dialux evo, MS Office CANDIDATE REQUIRED TO JOIN Immediate Joiner Location Bangalore Roles & Responsibilities: As a Sr. Design Engineer Electrical, plays a key role in the delivery of high-quality Electrical design solutions across building services projects including commercial, healthcare and mission-critical Data Centers. Operating under limited supervision, taking ownership of defined project tasks and leading projects from concept through to completion. Take ownership of defined electrical design packages and manage mid-to-large projects independently. Preparation of project schedule & effort estimation. Lead & support electrical design tasks, including calculations, schematics, layouts, and equipment selection, schedules etc., Prepare, maintain and organize the project design files like Desing Basis report, Specifications, Calculations reports, ensuring adherence to company standards and documentation practices. Electrical design with BIM Project management, as well as MEP Coordination duties that include checking & reviewing of all delivery submissions, Team supervision, etc. Design work includes low and medium voltage power distribution systems, motor control circuits, raceway systems, Bus bar system, cable tray system, fire alarm systems, underground utility plans, interior and outdoor lighting systems, Lightning protection systems, Earthing Design, Short circuit calculation, Energy Compliance, panel board and distribution board schedules. SCADA and PMS system design, PV system design. Provide technical verification and QA checks during design stages, ensuring compliance with standards. Proficient in IEC, TIA, FM200, NEC, BS, EN, IS, NEC and NFPA codes and standards. Ability to work on ETAP & SKM or equivalent load flow analysis software (for arc flash, short circuit, etc.) Preparation of Technical specifications, Bill of quantity, Cost Estimation and compliance statements. Strong expertise on standardization of BIM production workflow with better quality control processes. Coordinate with clients, vendors, contractors, and BIM teams to resolve issues and maintain cross-functional alignment. Ensure timely delivery of work amidst changing project demands and strict timelines. Self-motivated talent management characteristics with problem solving skills balancing cost and risk. Strong skills interacting with clients on-site and managing deliverables to ensure timely delivery of projects. Efficient communication skills with good presentation, negotiation and relationship characteristics. Creating and enforcing project quality plan. Consistently produce high quality of work. Familiar with discipline specific design software and design management systems. Proficient in Data Center Design in Europe & USA. This website uses cookies to improve your web experience.

Taking care of overall Facility & Admin activities. Daily, Weekly, Monthly technical check per PPM schedule. Attending TT calls for corrective maintenance, service and repair works Co-ordinate with vendor for systems under warranty/AMC. Energy consumption reading DG maintenance. Maintain and troubleshoot all conveyor systems, electrical and mechanical Ability to install, maintain, and troubleshoot power distribution systems, branch circuits, lighting systems, transformers, and wiring methods and material. Ability to install, maintain, and troubleshoot relay logic, ladder diagrams, control components-photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tacks, and encoders 6. Dedicated to supporting production by working in a safe, customer focused manner. Minor refurbishment and upgrade works for building finishes, fixtures, fittings and equipment, fixed furniture and OPS equipment like Trolley, Cages, Carts Fire Alarm & Fire extinguishers regular checks. Maintenance, oiling, greasing of carts, trolleys, pump, rolling shutters. Attending regular Electrical works Height work, hot work permit to issue. Minor Civil & Plumbing Corrective maintenance calls. Provide daily reports on TT closures & open cases & RCA. Tools inventory update. PPM schedule maintenance. Taking care of Soft services activities i.e. Pest control, Housekeeping, Scrap & Garbage disposal. Handling agency staff & overall shift 1. Control of Housekeeping and cleaning activities of the premises. 2. Control of Sanitization and Pest Control activities of the Premises. 3. Preventive Maintenance, Breakdown Maintenance, Trouble Shooting, Repairs and Modification works for Site Infrastructure and Machineries. 4. Support for pantry services for the site. 5. Supporting operations for system improvement and facility improvement. 6. Upkeep and maintenance of Facility Infrastructure. 7. Preparation of contracts for Housekeeping, Pest Control and Repairs & Maintenance activities. 8. Control and records keeping of all the above activities. 9. Fulfillment of all the safety requirement of the facility as per Amazon Standard and Indian Factory Rules. 10. Fulfillment of all the statutory requirement applicable to the facility management. 11. Timely payment of all the regular bills of the facility such as Electricity, Water, Rented Machines, Facility Rent etc. 12. Spares Management and Inventory Control. 13. Training and Development of People. 14. Infrastructure Improvement, Modification and Project Jobs as required for the facility time to time. 15. Preparation of Opex and Capex Budget. 16. Development of standard procedures and check sheets for safe handling of all the routine activities. 17. Document control and Record Keeping for all the statutory, Maintenance, Engineering, Safety and Quality. Experience in HVAC with minimum of 3 years experience Degree/Diploma the Mechanical or Electrical field 4/5 years experience in the Mechanical or Electrical field Able to manage, lead, and influence others on the team Demonstrated ability to multi-task and prioritize many different projects and workload Ability to work independently Ability to communicate effectively, (written and verbally) with peers, management, contractors and vendors Must be highly self-motivated and customercentric Leadership experience/aptitude, ability to mentor and develop training plans for other service technicians

Overview A globally recognized engineering and solutions provider, the organization is committed to delivering sustainable infrastructure through advanced technologies, innovative design, and operational excellence. With a strong presence across international markets, it supports municipal and industrial clients by offering end-to-end services from concept development and design to execution and operations. The team is driven by a mission to contribute to environmental sustainability while maintaining high standards of quality, safety, and compliance. Job Summary: We are seeking a detail-oriented and experienced Electrical Engineer specializing in Estimation & Costing to support our proposal and engineering teams. The ideal candidate will be responsible for preparing accurate cost estimates, reviewing technical specifications, and coordinating with cross-functional teams to ensure competitive and compliant proposals. Key Responsibilities: Perform quantity take-off for electrical equipment and cabling. Prepare Bill of Quantities (BOQ) and detailed cost estimates . Review electrical specifications , single line diagrams , and load calculations . Estimate power distribution systems and ensure compliance with IEC/IS standards and project requirements. Analyze vendor and subcontractor quotations for pricing and technical compliance. Conduct market price benchmarking and identify opportunities for cost optimization . Coordinate with proposal, design, and procurement teams to align on project requirements and deliverables. Support value engineering initiatives and ensure adherence to project timelines and budgets. Required Skills & Qualifications: Bachelor s degree in Electrical Engineering or a related field. Proven experience in estimation and costing within the EPC or infrastructure sector. Strong understanding of electrical systems , codes , and standards (IEC/IS). Proficiency in MS Excel , AutoCAD , and estimation software/tools. Excellent analytical, negotiation, and communication skills. Ability to work collaboratively in a fast-paced, deadline-driven environment.

Overview A globally recognized engineering and solutions provider, the organization is committed to delivering sustainable infrastructure through advanced technologies, innovative design, and operational excellence. With a strong presence across international markets, it supports municipal and industrial clients by offering end-to-end services from concept development and design to execution and operations. The team is driven by a mission to contribute to environmental sustainability while maintaining high standards of quality, safety, and compliance. J ob Summary We are seeking a seasoned Instrumentation Engineer with extensive experience in Estimation & Costing for electrical systems. The ideal candidate will be responsible for preparing accurate cost estimates, analyzing technical specifications, and coordinating with cross-functional teams to support project proposals and execution. Key Responsibilities: Estimation & Costing: Perform quantity take-off for electrical equipment and cabling. Prepare detailed Bill of Quantities (BOQ) and comprehensive cost estimates. Benchmark market prices and identify cost optimization opportunities. Technical Review: Analyze electrical specifications, single line diagrams, and project requirements. Conduct load calculations and estimate power distribution needs. Ensure compliance with IEC/IS standards and client specifications. Vendor & Subcontractor Coordination: Evaluate quotations from vendors and subcontractors. Support procurement decisions through technical and commercial analysis. Cross-functional Collaboration: Coordinate with proposal, design, and procurement teams to align on project scope and deliverables. Provide technical inputs during bid preparation and project planning stages Qualifications & Skills: Bachelor s degree in Electrical Engineering or related field. Minimum 15 years of relevant experience in instrumentation and electrical estimation. Strong understanding of electrical systems, standards, and cost analysis. Proficiency in MS Excel, AutoCAD, and estimation software. Excellent analytical, communication, and coordination skills.

Job Summary: Switchgear and Control Technics Pvt. Ltd. is seeking a skilled Electrical Maintenance Technician to perform routine and emergency maintenance, troubleshoot complex electrical systems, and ensure compliance with safety standards and codes. The ideal candidate will have experience with STP (Sewage Treatment Plant) , RO (Reverse Osmosis) systems , and electrical systems related to switchgear and control panels . Key Responsibilities: Perform preventive, predictive, and corrective maintenance on electrical systems and switchgear. Troubleshoot electrical issues in panels, wiring, control systems, motors, and power distribution. Interpret and work from electrical blueprints, schematic diagrams , and technical drawings. Maintain and troubleshoot STP, RO, DG Set, plant equipment and associated electrical controls. Ensure all work complies with electrical codes, safety standards , and company policies. Coordinate with the engineering team for timely upgrades and installations. Maintain documentation of all repairs, maintenance schedules, and parts used. Inspect and test electrical systems using tools such as multimeters, megger and clamp meters. Assist in the design and installation of electrical systems when needed. Requirements: ITI/Diploma in Electrical Engineering or related technical field. Proven experience in industrial maintenance, especially with switchgear, control panels, DG Sets and utility systems (STP/RO). Strong knowledge of electrical troubleshooting, repair, and preventive maintenance techniques. Proficiency in reading electrical blueprints and wiring diagrams. Solid understanding of electrical codes (e.g., IEC/IS/NEC) and safety practices. Ability to work independently or as part of a maintenance team. Familiarity with tools such as PLC testers, insulation testers, and safety lockout/tagout systems. Work Conditions: Willingness to work in shifts, weekends, or on-call as required. Physically fit to handle maintenance duties in industrial environments.

Description We are seeking an experienced E&I Engineer to join our team in India. The ideal candidate will have a strong background in electrical and instrumentation engineering, with a focus on designing and implementing systems for industrial projects. Responsibilities Design and develop electrical and instrumentation systems for various projects. Conduct feasibility studies and prepare project specifications. Ensure compliance with safety and quality standards in all engineering practices. Collaborate with cross-functional teams to integrate E&I systems into larger projects. Perform troubleshooting and maintenance of existing E&I systems. Prepare technical documentation and reports for project stakeholders. Participate in project meetings and provide updates on E&I progress. Skills and Qualifications Bachelor's degree in Electrical Engineering, Instrumentation Engineering, or a related field. 5-10 years of experience in electrical and instrumentation engineering. Strong knowledge of industry standards and regulations such as IEC, ISA, and NEC. Proficiency in using E&I design software such as AutoCAD, EPLAN, or similar tools. Experience with control systems, PLCs, and SCADA systems. Excellent analytical and problem-solving skills. Effective communication and teamwork abilities.

As an Electrical Engineer specializing in Energy Audit at Jalaram Enterprise, your primary responsibility will be to conduct energy audits, assess power distribution systems, analyze power systems, and implement energy-efficient solutions to optimize energy consumption. You will be working on-site full-time at Jalaram Enterprise located in Ahmedabad. The role requires a high level of proficiency in MS Word, Excel, and Powerpoint. Additionally, you should possess knowledge in Electricity and Power Distribution, along with certification or experience in Energy Audit. Your role will involve utilizing your strong problem-solving and analytical skills to provide innovative solutions in industrial and commercial segments for energy conservation. You should be willing to travel all over Gujarat for conducting energy audits and implementing energy-efficient solutions. To excel in this role, you must hold a Bachelor's degree in Electrical Engineering or a related field. Join us at Jalaram Enterprise and be a part of our passionate team of electrical engineers with over 15 years of experience in various industrial and commercial segments.,

You will be working as a Senior Electrical Engineer at SEALWEL CORPORATION PRIVATE LIMITED, located in Kakinada. Your primary responsibility will involve designing electrical systems, overseeing power distribution projects, and ensuring the efficient operation of power systems. Your tasks will include conducting electrical design, managing electricity-related tasks, and utilizing electrical engineering principles to address complex issues. To excel in this role, you should possess experience in Electrical Design and the application of electrical engineering principles. Additionally, you must have a good understanding of Electricity and be proficient in managing power systems. Skills in Power Distribution and Power Systems management are essential for this position. Strong problem-solving and analytical abilities are crucial, along with the capacity to work both independently and collaboratively. Ideally, you should hold a Bachelor's degree in Electrical Engineering or a related field. Previous experience in a senior engineering role would be advantageous. SEALWEL CORPORATION values innovation and excellence in the utilities sector, aiming to cater to the evolving needs of its clients. Join us in this dynamic environment where you can contribute your expertise to drive impactful solutions in the utilities industry.,

Oversee detailed design & engineering of ASI/GIS substations. SLD, Earthling, Control room, equipment, Cabling, illumination layouts. covering the full cycle of works from pre-bid engineering to support during commissioning and warranty periods Required Candidate profile Electrical Engineer with 10+ years experience in Detailed Design & Engineering of EHV substations upto 765KV. Extensive knowledge in System engineering, Load Flow, Short CSLD, Protection and Control

Detailed RCC/Structural design of transmission and distribution substations including design of 765kV Transmission Towers, buildings, Gantry, equipment structures, control room, transformer foundations, grading, roads and drainage, trenches etc. Required Candidate profile Civil Design Engineer with 10+ Detailed Design & Engineering (Both RCC and Structural) for Thermal Power, Renewable AIS and GIS substations (765Kv).Worked on overseas projects and international codes

Position: EPLAN Engineer (On Third-party payroll position) About Company: MNC Location: Chennai Experience: minimum of 5 years of experience working in similar industry EPLAN. Qualification: Diploma/bachelors in electrical engineering from a reputed Indian Institute Strong communication and teamwork skills. Job Summary: We are looking for the best talent to create Low Voltage and Medium Voltage Power Distribution Systems for the datacenters of the future. The position requires design for work within electrical energy technology for direct use in our international projects. Within our team the focus is on the realization of distribution systems specifically for the data center industry. As an EPLAN engineer you are responsible for developing a detailed design in EPLAN. In this position you will work within the operating company Smart Infrastructure in the department of “Electrification & Automation” in an enthusiastic, relatively young and diverse team. Our department specializes in custom design and construction of energy solutions for demanding customers in the APAC region in the higher segment of the market. Job Description: User of EPlan P8 Within this position, the emphasis will be on the technical detail design with support from a experienced lead engineer. In addition, short lead times and high demands from our customers ensure a lot of dynamics during the realization. Activities within your position include: Creating an electrical design using EPLAN Developing wiring diagrams, terminal lists and material lists Perform supporting tasks for the electrical engineer, including creating and checking nameplate lists and consumer lists Addressing technical issues Process as built and red/blue comments Generating drawing packages using typicals/macros Employment Type : Contractual for 1 year and extendable Payroll: - Lobo staffing Solutions Pvt. Ltd.

Designation - Electrical Draftsman Industry - Construction, Manufacturing Qualification- Diploma, B.E, ITI Experience - 1 to 5 Years in Construction or Any Electrical Eng Salary- 1500 AED to 2000 AED Location - Dubai HR SAN - 7200255975 Required Candidate profile Mandatory Documents 1.Resume 2.Original Passport 3.Passport Size Photo-2 4.Educational document photocopy Interested candidates send your resume through whats app to HR - 7200255975 Perks and benefits Free Accommodation,Transport and Medical Insurance

As an Eplan Designer at Chropynska Group, you will play a vital role in the electrical design, engineering, installations, and integration of power systems. We are a world-leading automation organization with a global focus on digitalization, process development, design, technology integration, robotics, and automation. This full-time position, located in Pune Chakan, is open to individuals at junior, middle, and senior levels based on their skills and experiences. Your responsibilities will include utilizing your Electronics, Mechatronics, and Electrical Design skills to ensure the successful execution of projects. To excel in this role, you should possess knowledge of Power Distribution and Power Systems, along with hands-on experience in Eplan software. Strong problem-solving abilities and excellent attention to detail are essential attributes for success in this position. A Bachelor's degree in Electronics, Mechatronics, Electrical Engineering, or a related field is required. In addition to working on-site, you should be prepared for off-site assignments, with a travel readiness to Europe or the USA for project requirements. This role offers a balance between on-site and off-site work, with a ratio of 20:80. Join our dynamic team at Chropynska Group and contribute to cutting-edge projects in automation and technology integration.,

Roles and Responsibilities Specific Role Requirements: ITO Configurator (ITOC) Tool deployment : ITO Configurator tool is collaborative tendering tool use by all functions (Engineering, sourcing, proposal team) to enable to deliver an offer following our technical solutions. Provide technical support/methods and specific technical configuration to the team to enable tool usage (ACS/HVDC/FACTS). Provide functional & cross-functional support as required by region and PDG. (Functions involved engineering, proposal team and sourcing team.) Understand the engineering process Inquiry to Order (ITO) to Order to Remittance (OTR), to ensure Bill of Material Bill of Quantity (BOQ) through ITOC done Ensure region quality of data in tool. From input of Standard solution team develop and support HVDC standard solution in ITOC tool. Support for maintenance of standard solution Act as focal point for functional support, 1st and 2nd level. Support local key user and large tenders teams to use ITOC tool for all tenders. Organize the training to key users on the functional use of the tool Maintain reference/training documentation for all user categories and functions (engineering, proposal team, sourcing and constructions) Technical Support for Sales & Business Development: Provide expert technical advice during the sales process to ensure solutions align with client needs and specifications. Participate in pre-sales meetings with customers, acting as the technical lead to discuss system requirements, feasibility, and potential customizations. Collaborate with the sales team to develop competitive proposals, ensuring accurate technical descriptions, design insights, and cost-effective solutions. System Design & Engineering Lead the design of electrical systems, including power distribution networks, substations, and integration of renewable energy sources tailored Evaluation of vendor Drawings, GTP, Calculation & Technical Specs LV/MV Engineering for the plant & substation ITO (tender) drawings, BOQ estimation, RFQ finalization, evaluation of various components & selection of equipment. Co-ordination and integration with Automation, Civil & MEP. Co-ordination of site & office team for execution of project Flexible and quick to learn global developments and adopt. Material Selection & Quantity Estimation Identify and select appropriate materials and components (e.g., transformers, switchgear, protection devices, cables) that meet project requirements and industry standards. Estimate material quantities, costs, and lead times to ensure accurate budgeting and procurement for project execution. Work closely with procurement and suppliers to optimize cost and delivery schedules for selected components. Collaboration & Team Leadership Collaborate with cross-functional teams, including other engineering disciplines, proposal managers, Supply chain construction, to ensure the smooth execution of tender. Provide mentorship and technical guidance to junior engineers and design teams involved in project execution. Qualifications Requirements Bachelors degree in electrical engineering or related field, from an accredited college or university. Minimum of 8+ years of experience in EHV/ HV Substation engineering. Good understanding of power system components (transformers, switchgear, protection systems) and renewable energy integration. Strong knowledge on contract and project management, Engineering, Procurement and Construction (EPC), or Engineering equipment package (EEP) type Excellent communication skills, capable of explaining complex technical concepts to both technical and non-technical stakeholders. Strong analytical and problem-solving skills, with the ability to balance technical requirements and business needs. Ability to work collaboratively across teams and with clients. Key Competencies: Customer-Centric Approach: Ability to translate customer needs into technical solutions that are practical, cost-effective, and compliant with industry standards. Technical Expertise: Deep knowledge of electrical system design, material selection, and quantity estimation tailored for oil and gas projects. Project Management: Ability to manage multiple tasks, meet deadlines, and provide leadership throughout the design and implementation phases. Safety & Compliance: Strong commitment to safety and regulatory compliance, with a focus on delivering designs that meet industry-specific standards.

We have requirements for Airport Project across India 1. Civil Engineer (Terminal, Landside, Airside) (Exp 5-15yrs) Job Description: Manages the design, execution, and supervision of civil works including terminal buildings, roads, pavements, and airfield infrastructure (runways, taxiways, aprons). Ensures compliance with airport design codes, safety standards, and project timelines. Coordinates with structural, geotechnical, and drainage consultants. 2. Electrical Engineer (including AGL)(Exp.5-15yrs) Job Description: Manages the design, installation and supervision of electrical systems for terminals, landside facilities, and airside infrastructure. Key areas include power distribution, lighting (indoor and outdoor), AGL (Airfield Ground Lighting), UPS, DG systems, and earthing. Ensures adherence to ICAO, DGCA, and BIS standards. 3. PHE & FF Engineer (Exp.5-15yrs) Job Description: Manages the design, installation and supervision of Public Health Engineering (PHE) systems water supply, sewage, drainage as well as Fire Fighting (FF) systems in terminals and airport infrastructure. Ensures compliance with NBC, NFPA, and local fire safety norms. Coordinates approvals from statutory authorities and supports during fire drills or mock evacuations. 4. ICT Engineer(Exp. 5-15yrs) Job Description: Manages the design, installation and supervision of Information & Communication Technology (ICT) infrastructure including passive cabling, network switches, data centers, Wi-Fi, telecom rooms, and airport-specific systems like BMS, SCADA, FIDS, and CUTE/CUPPS. Ensures integration with operational technologies while maintaining cybersecurity protocols. 5. Quantity Surveyor Civil (Terminal, Landside, Airside)(Exp. 5-15yrs) Job Description: Prepares and reviews BOQs, cost estimates, rate analysis, and tender documentation for civil works. Tracks project budgets, measures progress for interim payments, and manages variation orders. Performs site quantity verification and cost control across terminal, landside, and airside civil packages. 6. Quantity Surveyor Electrical, IT, Navaids (Exp 5-15yrs) Job Description: Handles quantity take-offs, cost estimation, and contract management for electrical systems, ICT infrastructure, and Navaids (e.g., DVOR, ILS, localizer, glide path). Coordinates technical and commercial evaluation of vendor submissions and tracks change orders for MEP/ELV/Navaid systems. 7. Quantity Surveyor MEPF & IT(Exp. 5-15yrs) Job Description: Focuses on cost planning and control for Mechanical, Electrical, Plumbing, Fire Fighting and IT systems in terminal and ancillary buildings. Prepares MEPF BOQs, supports tendering, reviews GFC drawings for quantity validation, and certifies monthly contractor bills. Liaises with design and site teams to align budgets with scope. Location: On-site Bangalore, Karnataka Scheduled Weekly Hours: 40 ! JLL Privacy Notice J. .

Career Area: Engineering Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, youre joining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We dont just talk about progress and innovation here we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Role Definition: Creates, implements and improves engineering designs, processes, techniques, tooling and machinery to meet customer requirements and maximize product quality. Responsibilities: Creating new designs and resolves issues regarding the manufacturing or building sequences. Ensuring design acceptance and manufacturing readiness. Participating in the adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Planning and improving engineering procedures and operations to make the product or process more reliable, efficient and cost-effective. Collaborating with all functional areas, (marketing, purchasing, manufacturing) to provide a design solution that meets the requirements of the customer and dealer network. Requires a degree in an accredited Engineering, Computer Science, or Materials Science curriculum. Degree Requirement: Degree required Skill Descriptors Information Capture: Knowledge of the methods, channels and processes to obtain needed information; ability to identify, capture and document relevant business information in an auditable, organized, understandable and easily retrievable manner. Level Working Knowledge: Follows defined procedures to document all routine information. Identifies relevant established standards, policies and practices. Fulfills routine information capture needs in own area. Uses automated tools to capture, organize and archive relevant information. Cites examples of different types of relevant information that need to be captured. Standard Operating Procedures: Knowledge of established standard operating procedures (SOP); ability to design, implement and evaluate standard operating procedures affecting daily and strategic business operations in order to increase operational efficiency. Level Working Knowledge: Adjusts SOPs according to changes in organizational and industry procedures. Tracks deviations from and modifications to existing SOPs in business operations. Ensures compliance with industry standards, regulations and policies. Assists in establishing a standard operating procedure based on workflow and environment review. Reviews the efficiency of standard operating procedures in terms of performance improvement. Analytical Thinking: Knowledge of techniques and tools that promote effective analysis; ability to determine the root cause of organizational problems and create alternative solutions that resolve these problems. Level Working Knowledge: Approaches a situation or problem by defining the problem or issue and determining its significance. Makes a systematic comparison of two or more alternative solutions. Uses flow charts, Pareto charts, fish diagrams, etc. to disclose meaningful data patterns. Identifies the major forces, events and people impacting and impacted by the situation at hand. Uses logic and intuition to make inferences about the meaning of the data and arrive at conclusions. Effective Communications: Understanding of effective communication concepts, tools and techniques; ability to effectively transmit, receive, and accurately interpret ideas, information, and needs through the application of appropriate communication behaviors. Level Working Knowledge: Delivers helpful feedback that focuses on behaviors without offending the recipient. Listens to feedback without defensiveness and uses it for own communication effectiveness. Makes oral presentations and writes reports needed for own work. Avoids technical jargon when inappropriate. Looks for and considers non-verbal cues from individuals and groups. Design for Manufacturability (DFM): Knowledge of design for manufacturability guidelines, methodologies, and use cases; ability to use this knowledge to optimize product designs and manufacturing operations. Level Working Knowledge: Analyzes the implementation challenges of DFM methodologies and shares them with their supervisors. Documents each stage of the design process for audit and review purposes. Follows standard guidelines and best practices while carrying out DFM procedures. Implements DFM methodologies to standardize product designs, simplify operations, and reduce costs for certain types of manufacturing processes. Utilizes basic DFM tools and technologies to implement DFM methodologies. Engineering - MFG: Knowledge of processes, techniques and methods of engineering in a manufacturing environment; ability to design and implement materials, structures, machines, devices, systems and processes that safely realize a desired objective or invention. Level Working Knowledge: Assists in problem resolution, drafting and writing specifications for engineering practices. Works with basic, routine components of the engineering discipline in manufacturing. Performs basic installation, maintenance and repairs for a specific engineering function. Follows relevant standards, policies and practices in engineering operations. Reports unusual engineering issues and considerations regarding manufacturing operations to senior staff. Product Testing: Knowledge of product testing approaches, techniques and tools; ability to design, plan and execute testing strategies and tactics to ensure product quality at all stages of manufacturing. Level Working Knowledge: Documents test process and results; prepares and analyzes defect-tracking reports. Summarizes features of a specific product-testing process and associated procedures. Tests components for compliance with functional requirements and established conventions. Discusses and compares usability, safety and integration testing. Develops product-testing procedures; participates in selecting testing environment and tools. Troubleshooting Technical Problems: Knowledge of troubleshooting approaches, tools and techniques; ability to anticipate, detect and resolve technical problems in a manufacturing or product development environment. Level Working Knowledge: Documents common hardware, software and communications problems and likely resolutions. Troubleshoots typical technical problems in a specific area. Works with vendor-specific diagnostic guides, tools and utilities to discover application problems. Adheres to standard troubleshooting procedures to ensure effectiveness of resolutions. Participates in setting evaluation standards and criterion for troubleshooting. This Job Description is intended as a general guide to the job duties for this position and is intended for the purpose of establishing the specific salary grade. It is not designed to contain or be interpreted as an exhaustive summary of all responsibilities, duties and effort required of employees assigned to this job. At the discretion of management, this description Additional Information: This job required 5days working from office.

Career Area: Engineering Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, youre joining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We dont just talk about progress and innovation here we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Role Definition: Designs, develops, builds, and implements new components, products, or technologies. Responsibilities Researching new materials and competitive products. Organizing, coordinating, and executing the building, testing, and analysis of prototypes. Assisting supply specialists and buyers with supplier development and supplier performance. Overseeing the efforts of drafting and testing specialists. Developing and documenting functional requirements and translating into detail design documents. Participating in buy-build analysis for product components. Participating in and supporting proposal preparation, cost estimates, and technical reports. Requires a degree in an accredited Engineering, Computer Science, or Materials Science curriculum. Degree Requirement: Degree required Skill Descriptors Analytical Thinking: Knowledge of techniques and tools that promote effective analysis; ability to determine the root cause of organizational problems and create alternative solutions that resolve these problems. Level Extensive Experience: Seeks discrepancies and inconsistencies in available information; explains variances. Organizes and prioritizes the sequence of steps to be taken to remedy the situation. Identifies many possible causes for a problem based on prior experience and current research. Quantifies the costs, benefits, risks and chances for success before recommending a course of action. Approaches a complex problem by breaking it down into its component parts. Chooses among a diverse set of analytical tools according to the nature of the situation. Effective Communications: Understanding of effective communication concepts, tools and techniques; ability to effectively transmit, receive, and accurately interpret ideas, information, and needs through the application of appropriate communication behaviors. Level Working Knowledge: Delivers helpful feedback that focuses on behaviors without offending the recipient. Listens to feedback without defensiveness and uses it for own communication effectiveness. Makes oral presentations and writes reports needed for own work. Avoids technical jargon when inappropriate. Looks for and considers non-verbal cues from individuals and groups. Managing Multiple Priorities: Knowledge of effective self-management practices; ability to manage multiple concurrent objectives, projects, groups, or activities, making effective judgments as to prioritizing and time allocation. Level Working Knowledge: Recognizes changing demands and priorities; validates changes with management. Obtains information about how current assignments contribute to organizational goals. Completes current work according to assigned priorities. Responds to day-to-day operational priorities while still making progress on project work. Performs at least 2-3 concurrent activities without reducing productivity. Technical Excellence: Knowledge of a given technology and various application methods; ability to develop and provide solutions to significant technical challenges. Level Working Knowledge: Provides effective technical solutions to routine functional challenges via sound technical competence, effectively examining implications of events and issues. Effectively performs the technical job aspects, continuously building knowledge and keeping up-to-date on technical and procedural job components. Applies technical operating and project standards based on achieving excellence in delivered products, technologies and services. Applies current procedures and technologies to help resolve technical issues in ones general area of technical competence. Helps others solve technical or procedural problems or issues. Computer-Aided Design & Engineering: Knowledge of tools and techniques of specialized graphics programs; ability to produce, analyze, simulate and test product design drafts. Level Extensive Experience: Coaches others on orthographic, isometric and axonometric projections. Presents complex products and systems graphically. Performs manipulations on design objects, such as changing projections and managing drawing layers. Directs the matrix computations performed to transform objects in coordinate space. Consults on benefits and drawbacks of top-down design vs. bottom-up design. Compares and contrasts uses of birds-eye views and worms-eye views. Product Design - MFG: Knowledge of processes, approaches, tools and techniques of product design; ability to convert customer and market requirements into product design. Level Extensive Experience: Develops improvement plans for senior management and evaluates the outcome of the design against the functionality. Advises others on the development of multiple products and their functionality. Trains others on advanced tools and approaches of product design. Monitors the processes and procedures of a complex product design to ensure functional requirements are met. Evaluates feedback from customers and consults on functional weaknesses. Controls design and development costs of a proposed product through effective resource coordination. Product Design and Development: Knowledge of product features; ability to design, build, and develop a new product, technology, or service from concept through to production. Level Working Knowledge: Builds three-dimensional models with basic materials. Communicates with professionals to understand various requirements of product design. Tests and evaluates alternative means of production being considered for use. Uses automated tools to design or modify the design of a product. Assists in building a complex prototype of product. This Job Description is intended as a general guide to the job duties for this position and is intended for the purpose of establishing the specific salary grade. It is not designed to contain or be interpreted as an exhaustive summary of all responsibilities, duties and effort required of employees assigned to this job. At the discretion of management, this description may be changed at any time to address the evolving needs of the organization. Additional Information: This job required 5days working from office.