10 Pls Jobs

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to Junior level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Overall 8+ years of work experience is preferred. Minimum Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc,) for Transmission Line Electrical, Mechanical, Civil or Structural design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable Chartership or Fellowship with ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Refers to the field of engineering dealing with the analysis and design of structures that support or resist loads. Commonly involved in the design of buildings and large nonbuilding structures, but can also be involved in the design of machinery, medical equipment, vehicles or any item where structural integrity affects the function or safety of an item. Discipline concerning force resisting and load bearing members and their connections for structures such as foundations, bridges, walls, columns, slabs, beams, trusses or similar members used singly or as part of a larger structure." Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Minimum Overall 10+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Structural design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable Chartership or Fellowship with IStructE / ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to Junior level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Overall 8+ years of work experience is preferred. Minimum Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical, Structural, Mechanical, Civildesign is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable Chartership or Fellowship with ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to Junior level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Overall 8+ years of work experience is preferred. Minimum Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Structural, Electrical, Mechanical and Civildesign is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable Chartership or Fellowship with ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to Junior level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Overall 8+ years of work experience is preferred. Minimum Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Structural design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable Chartership or Fellowship with ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Refers to the field of engineering dealing with the analysis and design of structures that support or resist loads. Commonly involved in the design of buildings and large nonbuilding structures, but can also be involved in the design of machinery, medical equipment, vehicles or any item where structural integrity affects the function or safety of an item. Discipline concerning force resisting and load bearing members and their connections for structures such as foundations, bridges, walls, columns, slabs, beams, trusses or similar members used singly or as part of a larger structure." Duties and Responsibilities Performs specific and limited portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with moderate supervision. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Minimum Overall 5+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Structural, Mechanical, Civil and Electricaldesign is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable Chartership or Fellowship with ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Engineer-power system studies Think bigger scale. Think higher profile. Think ground-breaking. Join WSP, and you’ll be at the heart of a team of international experts all dedicated to growing and sharing their expertise, and working on projects that transform society for all of us. WSP are looking for Principal Engineer – Power System Studies with over ten years’ experience of overall responsibility of strong engineering design, installation, configuration testing and commissioning, co-ordination including site supervision of works with emphasis on meeting the contract requirements with respect to quality, time and budget. The key objectives of the roles are to: Power system analysis of transmission and distribution projects. Feasibility studies, masterplans, despatch studies, renewable integration, grid code reviews Preparation of Renewable generation connection schemes from distribution to utility scale generation including determining techno-economical optimum amount of renewable generation. Load flow study, fault level calculations, harmonic analysis, voltage stability and transient stability analysis on transmission, distribution, and industrial power systems, using DIgSILENT, PSS/E, PLEXOS, ETAP, CYME PSAF, ASPEN OneLiner, ASPEN database and IPSA+. Review all the Power System Studies technical submittals by EPC contractor / Developers in reference to Client’s Electricity Transmission Code and International standards as applicable. Review the Power system models developed by EPC contractor specific to each study. Attend all the required meetings & address all the technical clarifications raised by EPC contractor / Developer. Attend the FAT & SAT visits to ensure all the performance criteria are met related to grid compliance requirements. The test shall be conducted with RTDS or other similar tools. Review the updated model received from EPC based on FAT/SAT reports and ensure all the grid compliance requirements are met as agreed during the detail design stage. Assist Client to incorporate HVDC model provided by EPC contractor into the TRANSCO network PSSE & PSCAD models suitable for various planning studies (steady state and dynamics). The power system studies review work shall briefly include, but not limited to the following: Reactive power capability study Grid impact study Transient and dynamic stability studies Insulation co-ordination study Switching transient study Faulted transient switching study Transformer Energization study AC/DC harmonics and flicker study AC/DC harmonic filter sizing report Harmonic impedance locus identification and analysis study AC protection relay setting coordination study Sub-synchronous resonance studies All required ETC compliance studies We'd love to hear from you if you have: Master’s Degree in Electrical / Power systems Engineering. Minimum 10 years of working experience with similar capacity. Proficient with Power system study softwares like PSS Sincal, PSSE, PLS CAD, Dig silent etc. Must have experience in Power System Studies and design related to High Voltage Direct Current (HVDC) offshore projects, Specifically Voltage Source Converter technologies, Grid Impact studies, etc. Must have experience in Power system studies on Transmission and Distribution projects. Essentially having detailed knowledge related to review of contractor’s drawings. People managing skill, with excellent written and verbal skills. Able to build excellent client relations through communication and multidisciplinary coordination skills Plexos Energy modelling What if we can? What if we can have work-life balance? What if we can be rewarded in ways that support our individual needs? What if we can be accepted for who we are? Here at WSP – we can! WSP recognizes that work is only one part of our lives and making time for the other things in our life is important – be that our families, our friends or ourselves. So, if working from home, working part-time or having flexible start and finish time will help with this let us know as part of your application. As well as rewarding you with competitive pay, WSP offers standard benefits including first class medical cover, paid professional subscriptions. Be you, be happy - we strive to have a friendly and inclusive culture which respects and maximizes the contribution individuals can bring to WSP. We recognise the benefits that people with varying backgrounds and experiences can bring. Here at WSP we positively encourage applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, religion or belief, marital status, pregnancy or maternity/paternity. We will interview all disabled applicants who meet the essential criteria.

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to Junior level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Overall 8+ years of work experience is preferred. Minimum Requirements Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Structural design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable Chartership or Fellowship with ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory Additional Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our employees and their families. We also provide a robust global well-being program. Were the worlds trusted global infrastructure firm, and were in this together your growth and success are ours too. As an Equal Opportunity Employer, we believe in each persons potential, and well help you reach yours. #LI-FS1 About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, youll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career youve always envisioned. Here, youll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it.

* Overall 8+ years of work experience is preferred. * Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Structural design is highly desirable * Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred * Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable * Chartership or Fellowship with IStructE / ICE or equivalent is desirable * Very good communication skills (Oral and Written) in English language is mandatory Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Refers to the field of engineering dealing with the analysis and design of structures that support or resist loads. Commonly involved in the design of buildings and large nonbuilding structures, but can also be involved in the design of machinery, medical equipment, vehicles or any item where structural integrity affects the function or safety of an item. Discipline concerning force resisting and load bearing members and their connections for structures such as foundations, bridges, walls, columns, slabs, beams, trusses or similar members used singly or as part of a larger structure." Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Overall 10+ years of work experience is preferred. Minimum Requirements Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Structural design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable Chartership or Fellowship with ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory Additional Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our employees and their families. We also provide a robust global well-being program. Were the worlds trusted global infrastructure firm, and were in this together your growth and success are ours too. As an Equal Opportunity Employer, we believe in each persons potential, and well help you reach yours. #LI-FS1 About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, youll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career youve always envisioned. Here, youll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it.

As an Overhead Line CAD Technician, you will drafting of a range of Overhead Line Circuits at voltages ranging from 132kV to 400kV. To act in a senior technical capacity in producing WSP engineering-related project drawings relating to for overhead line Transmission & Distribution, Renewable (Onshore & Offshore wind/ Solar), BESS projects. This includes (but not limited to): Create detailed engineering drawings for Overhead line routing layout, wire clearance diagrams, scaffold clearance check drawings, Downlead arrangement for towers, georeferenced layout and set drawings. Create detailed engineering profile drawings for overhead line routing. PLS CAD & PLS Tower knowledge is an added advantage. Create detailed engineering drawings for Extra High Voltage (EHV) projects, covering both Air Insulated Substations (AIS) and Gas Insulated Substations (GIS), ranging from 11kV up to 400kV Engineering design is an added advantage. Preparation and development of EC&I deliverables such as Single Line Diagrams, loop drawings, cable block diagrams, plant layouts, cable routing, cable containment design and switchgear configurations using both 2D and 3D software packages; Develop darwings to support detailed engineering, such as Land Utilisation Plan, Elevations, Above and Below Grade Conduit layouts, Grounding layout & it’s connection details, Lighting and Lightning protection with respective details, Bill of Materials, CDM layouts. Facilitate coordination of design activities across various departments, including Civil/Structural, Networks, and primary engineering team. Conduct design reviews, participate in virtual meetings, and collaborate closely with clients. Assist with preparing drawings and revising existing engineering drawings of basic components from specific sketches or layouts. Responsible for adhering to company and client drafting standards and procedures. Responsible for adhering to the drafting practices of selected discipline. Assist in drafting design and documentation for various projects. Coordinate with team members and monitor project schedules, ensuring submissions meet high-quality standards. Maintain compliance to CDM Regulations and all other legal and regulatory requirements associated with the nature of substation and electrical system design. Collaborate with WSP UK office on design activities. Provide guidance and mentorship to less experienced team members. Develop and enhance processes, tools, and potentially implement new technologies into the design process. Periodic Quality checks to be conducted for other engineers & designers. Exhibit ingenuity, foresight, and wise decision-making skills in proactively identifying and resolving challenges. Contribute to the progress and growth of departmental tools and workflows aimed at improving the effectiveness of design processes, specification development, and project implementation. Engage in training sessions and meetings dedicated to addressing targeted organizational initiatives.Qualifications Possess a Diploma or ITI in electrical engineering from an accredited institution. Have a minimum of five years and a maximum of twelve years of experience in the field of Substation Transmission & Distribution, Renewable (Onshore & Offshore wind/ Solar), BESS projects. Preferably familiar with UK projects. Experience of working in a lead substation design role on National Grid Electricity Transmission projects (or other UK utilities like SSEN, SPEN etc.) in the UK will be an added advantage. Experience in Onshore wind, Offshore wind, Renewable (solar) and BESS projects is preferred. Familiarity with 3D tools (MicroStation) for Engineering design is desirable. Excellent verbal and written communication skills. Strong problem solving and analytical skills. Basic knowledge and experience in Microsoft Office programs, including, Word, Excel, PowerPoint, and Outlook. Demonstrated leadership skills. Self-motivated and eager learner, aptitude to grow and develop within the field.