1451 Plcs Jobs - Page 29

Coordinate operation activities during the shift to ensure that the plant is operated according to the demand. Plan and Coordinate operation & Maintenance activities at the plant and/or assigned team during the shift. Ensure that the performance targets of the plant are reached according to the contract in his own responsibility area. Train maintenance procedures and standards for the new workers. Ensure that the work is executed at the plant according to W rtsil Quality, Health, Safety, and Environmental guidelines and customer site procedures. Prioritize and assign tasks so that assigned team resources are used effectively and targets are met. Communicate with the grid control center and plant management about the loading of the plant. Maintain all operation & Maintenance records according to the Plant Management procedures & guidelines. Assist the superior as required. Develop the operation working routines at the plant. Follow all maintenance procedures according to Wartsila standards. Requirements: Educational Requirement: Diploma or BE Electrical. Experience : Minimum 5 years of experiencein power plants/marine/industrial environment at supervisory level Hands on experience of operating DG plant Expert knowledge of power plant electrical systems and equipment Understanding of predictive and preventive maintenance best practices Strong leadership, communication, and organizational abilities Proficiency with MS Office and maintenance data analysis Commitment to safety and operational excellence Valid C Licence or applied will be added advantage

Job Title: Electrical Design Engineer Key Responsibilities: Perform calculations and selection of low and medium voltage systems, including AC load calculations, protective devices, relays, cables, and electrical components based on application and design standards. Design low and medium voltage motor control systems (MCC), including solid-state systems. Develop industrial control and protection schemes for electrical distribution systems, motor controls, and electrical systems. Prepare single-line and three-line diagrams, panel IGA & OGA drawings, schematics, wiring diagrams, cable tray & wireway designs, and P&IDs as per customer specifications. Ensure compliance with UL508A, IEC, NEMA, BS, European, IS, NEC, IEEE, and other relevant standards. Design and test safety interlocks in compliance with NFPA and customer-specific safety regulations. Develop EPLAN symbols, metadata fields, macros, 3D macros, and drilling patterns. Create and update functional design specifications. Specify and size electrical equipment , prepare load lists, electrical calculations, cable schedules, and layout drawings. Utilize software such as AutoCAD Electrical, EPLAN, and SolidWorks Electrical. Interpret and review mechanical (P&ID, equipment layouts, piping, HVAC, PHE, fire protection), and ELV (BMS, SCADA, fire alarm, CCTV, public addressing, field instrumentation) drawings and layouts. Develop basic, detailed, and GFC (Good for Construction) single-line diagrams, ensuring proper relay protections, metering, operation, controls, safety interlocks, and redundancies. Work with relays, switchgear protection, transformers, cables, motors, VFDs, UPS, and soft starters. Prepare lighting, cable tray, earthing, lightning, and conduit/wiring drawings. Develop power & control cable schedules, tray sizing, and earthing schedules. Strong understanding of E&I equipment such as transformers, panels, cables, heat trace systems, PLCs/RTUs, control valves, and field instruments. Estimate BOQ/BOM for projects. Prepare RFQs with complete scope details, datasheets, specifications, drawings, and risk assessments. Review vendor technical submissions for technical compliance, contractual obligations, site installation, commissioning, and constructability. Qualifications & Experience: Bachelor’s degree in Electrical or Instrumentation Engineering. 5–10 years of relevant electrical design experience. Experience working in multi-disciplinary teams (process, mechanical, civil, structural, electrical, instrumentation, and piping). This role requires a highly skilled professional with strong technical expertise in electrical engineering, design coordination, and industry compliance. If you meet these qualifications, we encourage you to apply. For Apply please Email your resume to : Kiran@sedintechnologies.com

Responsibilities Supervise on-site activities like panel installation, cable laying, terminations & equipment setup. Perform loop checking, signal verification, and calibration of field instruments. Collaborate with the engineering team to troubleshoot and resolve PLC and SCADA issues. Participate in Factory Acceptance Tests (FAT) to ensure system functionality and compliance. Participate in Site Acceptance Tests (SAT) to confirm successful system performance on-site. Serve as the client contact from site, ensuring effective communication and satisfaction. Manage AMC tasks, including system inspections, preventive maintenance, and repairs. Ensure safety standards and regulations are followed during commissioning activities. Role Requirements Degree/Diploma in Electrical & Electronics Engineering, Electronics and Instrumentation Engineering, Electronics & Communication Engineering, or any relevant field. 1+ years of experience in on-site commissioning of Industrial Control & Automation Systems. Strong experience in troubleshooting, configuring, and programming PLCs, HMIs, and SCADA systems. Knowledge of integrating field instruments (pressure, flow, level, temperature) with PLC/SCADA systems. Knowledge of integrating electrical switchgear, PCC, and MCC panels with PLC/SCADA systems. Proficiency in industrial protocols such as Modbus (RTU/TCP), Profibus, Profinet, Ethernet/IP, etc. Ability to perform loop checks, signal verification, and calibration during system commissioning. Knowledge in troubleshooting PLC programs written in Ladder Logic, Structured Text, and Function Block Diagram (FBD). Understanding of communication networks (Ethernet, Fiber Optic, RS232, RS485, etc.). Familiarity with engineering drawings, GA, electrical wiring diagrams, P&ID, etc. Strong analytical and problem-solving skills. Excellent communication and collaboration abilities in a cross-functional environment. Why Join CONSYST Embark on an exciting journey with Consyst, where we prioritize the growth and collaboration of our team through: Talent Cultivation: We believe in nurturing your skills and providing opportunities for personal and professional development. Innovative Projects: Join us in contributing to cutting-edge projects that shape the future of Industrial Control and Automation. Dynamic Team Environment: Become a valued member of our dynamic and collaborative team, where your contributions are recognized and celebrated. If you’re ready to take the next step in your career and make a substantial impact, seize the moment, and apply today! Elevate your career with Consyst – where your potential meets limitless possibilities! Location : Kochi Apply Now

Should have hands on exposure on Siemens, AB, Schneider & Mitsubishi PLC's (Intermediate to high-end level expertise). Should have hands on exposure on Wincc, FT View, Vijeo Citect SCADA frameworks(Intermediate to high-end level expertise) Handled multiple project in Industrial Automation, Process Automation. Knowledge in HVAC, BMS, EMS and Datalogging systems. Intermediate exposure in handling SQL databases. Strong exposure on instrumentation in verticals (HVAC, BMS, Process instrumentation) Exposure in Erection, Installation, Testing and Commissioning in Small to Medium sized projects. Exposure towards reputed Industrial communication Protocols Modbus RTU, Modbus TCP/IP,DNP3.0,Profibus, Profinet, Ethernet/IP etc. Exposure on 21 CFR Part 11 Compliance, GAMP5 regulations. Worked in the Pharma domain and handled documentation related to IQ/DQ/OQ/PQ protocols. Intermediate level exposure in Industrial Networking, connecting PLCs, SCADA & HMI's in Client- Server or Redundancy Architecture. Comfortable in Understanding and modifying System Architecture, Panel drawing, Cable Scheduling, Plant Layouts, P&ID. Automation Engineer experience - minimum 2 years Sr. Automation Engineer experience - minimum 4 years Automation Team Lead / Assistant Manager experience - minimum 6 years Immediate joiner Available for interview on 03-07-2025 to 05-07-2025 CV may also be mailed to rajkumar.halder@radix.co.in

Job Responsibilities: · Assisting with SCADA system design and implementation : This includes contributing to the development of system architecture, component specifications, and configuration settings. · Configuring and testing SCADA systems: This involves setting up SCADA software, testing system functionality, and verifying the correct operation of SCADA components. · Troubleshooting SCADA system issues: Identifying and resolving technical problems, including communication errors, data acquisition failures, and software glitches. · Maintaining and updating SCADA systems: Ensuring the SCADA system remains reliable and performs optimally, including regular updates, security patches, and system upgrades. · Collaborating with other engineers and technicians: Working closely with other team members to ensure the successful deployment and operation of SCADA systems. Education : Bachelor's degree: A Bachelor's degree in Electrical, Electronic, or Industrial Engineering (or a related STEM field) is typically required Relevant experience: While a junior role, some employers may prefer or require prior experience with SCADA systems Knowledge of SCADA software: Familiarity with specific SCADA software platforms (e.g., Wonderware, Rockwell Automation) is often expected. Knowledge of PLC systems: Understanding of Programmable Logic Controllers (PLCs) and their integration with SCADA systems is often essential. Knowledge of industrial communication protocols: Familiarity with common industrial communication protocols (e.g., Modbus, DNP3, IEC 61850) is often required. Skills : Problem-solving: The ability to diagnose and resolve technical issues related to SCADA systems. Troubleshooting: Strong analytical skills to identify the root cause of system problems. Attention to detail: Ensuring accurate configuration, testing, and documentation of SCADA systems. Communication: Effectively communicating technical information to both technical and non-technical audiences. Organizational skills: Managing tasks, prioritizing work, and maintaining detailed records. Experience : Minimum 5 to 6 years in Scada Salary : No bar for Right Candidate Maximum 45k Inhand per month intrested Candidate send your Resume on jay@groupnish.com

Job Title: Sales Engineer Location: Rajkot, Morbi, Gandhidham, Baroda, Vapi Department: Sales – Residence Engineer Reporting To: Sales Manager Experience: 2–3 years in Industrial Automation Sales Qualification: Diploma/Bachelor’s in IC, Electronics, Electrical, or Mechatronics CTC: ₹4–5 LPA (No bar for the right candidate) Job Summary: We are seeking a motivated Sales Engineer with hands-on experience in industrial automation solutions to drive B2B sales across key locations in Gujarat. The role involves end-to-end client engagement—from lead generation to order execution—while promoting automation systems like PLCs, HMIs, SCADA, VFDs, and servo systems. Key Responsibilities: Generate and convert leads in industrial automation space Understand client control system needs and propose technical solutions Prepare techno-commercial offers, BOM, and system architecture Negotiate with clients and close sales Coordinate with internal teams for project execution Ensure timely collections and maintain client relationships Promote solutions to OEMs, End Users, EPCs, and Consultants Operate and report using ERP system Skills & Requirements: Strong knowledge of PLCs, HMIs, SCADA, VFDs, Sensors, and Servo Systems Excellent communication, presentation, and client-handling skills Goal-oriented with a customer-first mindset Fluent in English; ERP usage experience preferred To apply, please share your updated CV at: exerecruiter3@dcspl.com

Job description Job Description: Assist in automating systems using PLCs, RTUs, SCADA & HMI Systems. Support in programming IoT devices, PLCs, and RTUs. Learn and work with Modbus and other protocols. Assist in troubleshooting installations and resolving issues. Contribute to creating automation cabling plans. Required Candidate Profile: Currently pursuing or completed a Diploma/BE in Electronics/Electrical/Instrumentation. Basic understanding of PLC and SCADA programming. A keen interest in automation design and control systems. Exposure to IoT & M2M concepts is a plus. Willingness to travel. Position based in New Delhi (Dwarka). Job Types: Full-time, Permanent, Fresher, Internship Contract length: 3 months Pay: From ₹12,000.00 per month Benefits: Health insurance Paid sick time Paid time off Provident Fund Work from home Schedule: Day shift Supplemental Pay: Performance bonus Quarterly bonus Yearly bonus Application Question(s): Are you currently in New Delhi? Work Location: In person

As the Assembly and Test Automation Director, your primary responsibility is to lead a team of managers and engineers in implementing automation solutions, which drives manufacturing excellence, viz. quality/ yield, factory footprint & equipment utilization, labor productivity and cycle time improvements. Automation encompasses physical infrastructure like material handling, storage & retrieval, manufacturing execution systems, dispatch & scheduling systems and smart manufacturing programs. You will be responsible for handling and improving functional area performance by collaborating with internal and external partners to build and implement strategies aligned to corporate objectives. Your leadership should encourage both individual capability and high-performance team with clearer goals and development plans. You will monitor performance metrics to identify and implement continual improvement opportunities. Other responsibilities include ensuring organizational compliance to company policies and laws, as well as to departmental procedures for the development of sustainably successful solutions. Responsibilities and Tasks Planning and Implementation: Develop an automation roadmap and implement solutions to improve quality, efficiency, productivity, and overall plant performance. Run automation projects from conception to completion, ensuring they meet budget, schedule, and quality requirements. Develop organizational structure and talent to support the infrastructure for sustainable performance. Know-how Expertise: Possess extensive knowledge of the Manufacturing Execution System suited for semiconductor industry esp. Packaging Assembly & Test. Experienced in automated material handling viz. AMHS or AGV/ ARV, automated storage solutions viz. ASRS or stockers Exposed to IIOT sensors, systems and framework Experienced with dispatch and scheduling systems for high volume manufacturing environment; advantageous if it is for semiconductor industries Possess a good understanding of industrial automation technologies, including PLCs, HMIs, SCADA systems, robotics, and vision systems. Team Leadership and Management: Lead, mentor and strengthen a team of elite automation engineers Continuously build up team’s technical competencies through knowledge sharing and industry benchmarking Manage staff performance, conduct regular performance evaluations, and provide opportunities for professional development. Develop a culture of partnership, communication, and collaboration within the team and with other departments. Run partner relationships, including vendors. Operational Expertise: Excellent project management skills - overall site project achievements, technical challenges, lead-times and risk mitigation plans Setup regular meeting with multi-functional team to ensure successful implementation of automation solutions Fix and diagnose automation system failures, ensuring minimal downtime Develop and maintain user documentation. Continuous Improvement: Identify areas for continuous improvement in automation processes and systems. Implement and track key performance indicators (important metrics) to measure the effectiveness of automation initiatives. Drive a culture of innovation and experimentation to find new and better ways to automate processes. Safety and Compliance: Ensure compliance with all relevant safety laws and industry standards. Develop and implement safety procedures for automation systems and processes. Conduct regular safety inspections and audits. Requirements: Engineering graduate preferably in Computer Science, Electrical/ electronics, mechanical field; MBA is preferred. Overall 18+ years of experience and particularly 5+ years of experience of leading manufacturing excellence and automation 5+ years of experience in groundbreaking projects in complex environments Prior experience of setting up a Centre of Excellence for manufacturing automation Consistent track record of inspiring change through influence and leading multi-functional teams through ambiguity Strong influencing and negotiating skills sufficient to shape thinking and decisions while responding to underlying concerns or multiple interests Excellent analytical ability, organizational, problem solving, and leadership skills Additional certifications like Scrum, PMP, and other relevant credentials are a plus Excellent verbal, written, and interpersonal communication skills Proficient in Visio, Word, Excel and PowerPoint; familiarity with Microsoft Project considered an asset

Job Requirements Job Description: TEAL-Engineer Electrical Design & P at Titan Company Overview: Titan is a leading provider of automation solutions for various industries. We are committed to delivering innovative and reliable products to our clients. Our team of experts is dedicated to providing exceptional service and support to our customers. Job Title: TEAL-Engineer Electrical Design & P Job Type: Regular/Permanent (RP) Job Category: Automation Solutions Department: Engineering Location: Hosur, Tamil Nadu, India Additional Parameters: Minimum 3 years of experience in electrical design and programming Proficiency in PLC programming and HMI development Knowledge of electrical control systems and industrial automation Strong problem-solving and analytical skills Ability to work independently and in a team environment Excellent communication and interpersonal skills Willingness to travel for project assignments Job Summary: We are seeking a highly skilled and experienced TEAL-Engineer Electrical Design & P to join our engineering team at Titan. The ideal candidate will have a strong background in electrical design and programming, with a focus on automation solutions. This role will be responsible for designing, programming, and implementing electrical control systems for our clients. Key Responsibilities: Design and develop electrical control systems for automation solutions Program PLCs and develop HMIs for industrial automation Collaborate with cross-functional teams to ensure successful project delivery Troubleshoot and resolve technical issues related to electrical design and programming Conduct testing and commissioning of electrical systems Provide technical support to clients and assist with on-site installations Stay updated with industry trends and advancements in automation technology Adhere to safety standards and regulations in all aspects of work Qualifications: Bachelor's degree in Electrical Engineering or a related field Minimum 3 years of experience in electrical design and programming Experience with PLC programming and HMI development Knowledge of electrical control systems and industrial automation Familiarity with CAD software and electrical design tools Strong problem-solving and analytical skills Excellent communication and interpersonal skills Ability to work independently and in a team environment Willingness to travel for project assignments If you are a highly motivated and skilled individual with a passion for automation solutions, we encourage you to apply for this exciting opportunity at Titan. We offer a competitive salary, benefits package, and opportunities for career growth and development. Join our team and be a part of our mission to provide innovative and reliable automation solutions to our clients. Work Experience Education B.E./Diploma in – EEE, E&I and Mechatronics Relevant Experience 2-4 years of experience in Machine Building and Automation Field Behavioural Skills Learning attitude Analytical skills Problem Solving skills Team player Time management Critical thinking Interpersonal/Influencing skills Good Communication and presentation skills Positive thinking/attitude Adaptability Proactive Team management and guidance to the team

Position: Chief Executive Officer Location : Noida Industry: Power Sector The Role – Key Objectives: Lead the Organisation into its next phase of digital growth, aiming to double turnover year-over-year. Drive transformation through digital technologies, IoT, AI-based analytics, automation, and cloud-based energy systems. Expand domestic and international presence through strategic partnerships and innovation. Develop and lead a future-ready organization with high-performance culture and agile execution. Key Responsibilities: Provide strategic and digital leadership to reengineer legacy EPC practices using smart technologies. Spearhead implementation of Digital Substations, SCADA, AMI, EMS, IoT-based monitoring, and real-time data analytics platforms. Guide product and solution strategy around AI-driven load forecasting, grid analytics, and distributed energy resource management (DERM). Build capabilities for smart infrastructure execution, including: Smart meters, fault location systems (FPI) Substation automation (IEC-61850) Remote operation & control of grid assets Oversee financial performance, risk management, and business growth. Strengthen customer and stakeholder relationships—especially with utilities, state regulators, and global technology players. Lead technology partnerships with OEMs, software providers, and system integrators in digital energy space. Create a collaborative and innovation-driven culture within the organization. Candidate Profile: Educational Background: B.Tech/B.E. in Electrical / Electronics / Computer Science / Instrumentation / IT MBA or equivalent leadership education preferred Experience: Minimum 20+ years in the Power sector with at least 5 years in CXO / P&L / Profit Centre role. Proven experience leading digital transformation or smart infrastructure projects. Hands-on leadership in: Smart Grid & AMI EMS/DMS platforms SCADA/RTU/PLCs/IoT deployment Integration of renewables (solar, BESS) Exposure to international utilities, regulators, or donor-funded digital energy projects is a plus. Competencies: Strong commercial acumen with a tech-forward mindset. Deep understanding of both EPC execution and digital business models. Ability to lead cross-functional teams in a fast-paced environment. Collaborative, results-driven, and entrepreneurial.

Job Title: Maintenance Engineer – Welding & Casting Equipment Department: Maintenance/Production Engineering Reporting To: Maintenance Manager / Plant Head Job Purpose: To ensure the efficient maintenance and operation of welding and casting equipment, including robotic systems, spot welding guns, and electropneumatic welding fixtures. The role focuses on minimizing downtime, improving machine reliability, and supporting production goals. Key Roles & Responsibilities: Perform regular preventive and breakdown maintenance of welding and casting equipment. Hands-on maintenance of spot welding guns (both manual and robotic welding guns). Maintain and troubleshoot electropneumatic welding fixtures, ensuring optimal functionality. Perform repair, servicing, and troubleshooting of robotic welding equipment. Diagnose and resolve technical issues in welding processes, fixtures, and associated equipment. Ensure the operational efficiency of casting machinery through scheduled maintenance and repairs. Collaborate with production and quality teams to minimize downtime and maintain product quality. Monitor machine performance and suggest improvements for reliability and efficiency. Maintain maintenance records, service logs, and documentation for audits and operational tracking. Adhere strictly to safety protocols and compliance regulations during maintenance activities. Desired Candidate Profile: Qualification: Diploma or BE/B.Tech in Mechanical/Electrical/Mechatronics/Industrial Engineering or equivalent. Experience: 3 to 8 years of hands-on experience in maintenance of welding (manual and robotic) and casting equipment. Key Skills Required: Strong technical knowledge in spot welding equipment, robotic welding systems, and casting machinery. Experience in electropneumatic fixture maintenance. Proficient in troubleshooting robotics, welding guns, and mechanical/electrical components. Basic understanding of automation, PLCs (optional but desirable). Problem-solving, analytical thinking, and decision-making abilities. Knowledge of safety standards related to welding and industrial maintenance. Work Model: Full-time | Onsite

Job Title: Robotic Maintenance Engineer / Technician Department: Maintenance / Automation Reporting To: Maintenance Manager Job Summary: The Robotic Maintenance Engineer is responsible for ensuring the operational efficiency of robotic assembly equipment by performing preventive maintenance, troubleshooting, and repairs. The role involves working with drive systems, PLCs, sensing devices, and vision systems while ensuring safety compliance and minimizing equipment downtime. Key Responsibilities:1. Preventive Maintenance: Perform scheduled preventive maintenance on robotic assembly equipment. Ensure optimal performance, reduce downtime, and extend the life of machinery. 2. Troubleshooting and Repairs: Diagnose and repair mechanical, electrical, and automation-related issues in robotic systems. Troubleshoot PLCs and resolve communication issues between multiple PLC systems. 3. Vision System Maintenance: Maintain and troubleshoot vision inspection systems used in assembly lines. Ensure accurate detection and quality control through proper functioning of vision systems. 4. Drive Systems: Maintain, troubleshoot, and repair Siemens Drives and SEW Drives. Ensure effective operation of drive systems for production equipment. 5. Sensing Devices: Install, maintain, calibrate, and troubleshoot a variety of sensing devices, including proximity sensors, photoelectric sensors, and pressure sensors. Ensure reliable and safe machine operations. 6. Electrical Hoists: Maintain, inspect, and repair electrical hoists used in the assembly process. Ensure compliance with safety standards and reliable operation. Required Skills and Qualifications: Education: Diploma / B.E. / B.Tech in Electrical, Electronics, Mechatronics, or related fields. Experience: 3–8 years of experience in robotic assembly equipment maintenance, automation, or industrial maintenance. Technical Skills: Hands-on experience in troubleshooting and repairing robotic systems. Proficiency in PLC troubleshooting (Siemens, Allen Bradley, Mitsubishi, or similar). Knowledge of Siemens and SEW drive systems. Familiarity with vision inspection systems (Cognex, Keyence, Omron, etc.). Experience in installing and troubleshooting industrial sensing devices. Electrical hoist maintenance and repair experience. Soft Skills: Problem-solving abilities. Attention to detail. Ability to work independently and collaboratively with teams. Good communication skills. Additional Requirements: Willingness to work in shifts and during equipment breakdown emergencies. Adherence to all company safety protocols. Ability to maintain proper documentation of all maintenance tasks.

Job Title: Maintenance Engineer – Robotic Assembly (Electrical & Automation) Department: Maintenance / Engineering Reports To: Maintenance Manager / Plant Head Job Summary: We are looking for a skilled and proactive Maintenance Engineer – Robotic Assembly to handle preventive maintenance, troubleshooting, and repair of robotic assembly lines and automation systems. The role requires expertise in PLC troubleshooting, drive systems (Siemens/SEW), vision systems, and industrial sensing devices, ensuring minimal downtime and maximum equipment reliability. Key Responsibilities: Preventive Maintenance: Perform scheduled preventive maintenance on robotic assembly equipment to ensure optimal performance and extend equipment life. Monitor and adjust maintenance schedules based on equipment performance data. Troubleshooting and Repairs: Diagnose and repair electrical, electronic, and automation faults in robotic systems. Troubleshoot PLCs, including communication issues between different PLC systems (Siemens, Allen Bradley, etc.). Vision System Maintenance: Maintain and troubleshoot machine vision systems used for product quality control. Ensure calibration and alignment of vision systems for accurate operation. Drive Systems: Maintain and troubleshoot Siemens Drives, SEW Drives, and related motion control equipment. Conduct parameter settings, fault analysis, and repairs as needed. Sensing Devices: Install, calibrate, and maintain industrial sensors (proximity, photoelectric, ultrasonic, etc.) for process control and safety. Troubleshoot faults in sensing and feedback systems. Electrical Hoists: Maintain and repair electrical hoists and lifting equipment to ensure safe and reliable operation. Documentation & Reporting: Maintain accurate records of maintenance tasks, repairs, breakdown reports, and spare part usage. Update machine histories and maintenance logs. Safety & Compliance: Follow all safety protocols, lockout/tagout procedures, and comply with company and industry safety standards. Identify and mitigate any potential safety hazards during maintenance activities. Qualifications & Experience: Diploma / BE / BTech in Electrical, Electronics, Mechatronics, or related engineering discipline. Minimum 5–8 years of experience in industrial maintenance, preferably in robotic assembly and automation systems. Technical Skills: Strong knowledge of PLC systems (Siemens, Allen Bradley, Mitsubishi, etc.). Experience with Siemens and SEW drive systems. Hands-on experience in vision systems (Cognex, Keyence, or equivalent). Proficient in troubleshooting sensors and electrical circuits. Ability to read and interpret electrical schematics and automation diagrams. Familiar with safety standards related to industrial automation and robotics. Soft Skills: Problem-solving and analytical skills. Good communication and teamwork abilities. Ability to work under pressure and handle breakdown situations efficiently. Work Model: On-site | Full-time Willingness to work in shifts if required.

Job Title: Robotic Maintenance Engineer Department: Maintenance / Automation Reporting To: Maintenance Manager / Engineering Head Job Purpose: To perform preventive maintenance, troubleshooting, and repair of robotic assembly equipment, including PLC systems, drives, vision systems, sensing devices, and electrical hoists, ensuring smooth and uninterrupted production operations. Key Responsibilities:1. Preventive MaintenancePerform scheduled preventive maintenance of robotic assembly equipment. Ensure equipment runs at peak efficiency and extends equipment life. 2. Troubleshooting and RepairsDiagnose and repair faults in robotic systems. Troubleshoot PLCs and resolve communication errors between multiple PLC systems (Siemens, Allen Bradley, etc.). 3. Vision System MaintenanceMaintain, calibrate, and troubleshoot vision inspection systems on assembly lines (e.g., Cognex, Keyence, Omron). Ensure accuracy and functionality for quality control processes. 4. Drive SystemsTroubleshoot and maintain Siemens Drives and SEW Drives. Ensure drive systems are operating efficiently and effectively without downtime. 5. Sensing DevicesInstall, calibrate, and repair various sensing devices including proximity sensors, photoelectric sensors, and pressure sensors. Ensure safe and accurate functioning of sensors across the assembly line. 6. Electrical HoistsPerform routine maintenance and repairs of electrical hoists. Ensure operational safety and reliability of lifting equipment. Required Skills and Qualifications: Educational Qualification: Diploma / BE / BTech in Electrical, Electronics, Instrumentation, Mechatronics, or a related field. Experience:3–8 years of relevant experience in robotic maintenance or industrial automation. Technical Skills: Hands-on experience with PLC troubleshooting (Siemens, Allen Bradley, Mitsubishi, etc.). Knowledge of Siemens and SEW drives maintenance. Proficient in troubleshooting and maintaining machine vision systems. Familiarity with industrial sensing devices and troubleshooting techniques. Experience in electrical hoist maintenance and safety procedures. Soft Skills: Strong analytical and problem-solving ability. Good communication and teamwork skills. Ability to work under pressure with minimal supervision. Proactive approach towards machine uptime and safety compliance. Additional Requirements: Willingness to work in shifts, including weekends or holidays if required. Commitment to safety, quality, and continuous improvement. Ability to maintain detailed maintenance records and reports. Employment Type: Full-Time

Job Title: Maintenance Engineer – Robotics & Automation Department: Maintenance/Engineering Reporting To: Maintenance Manager Job Summary: We are seeking a dedicated and skilled Maintenance Engineer – Robotics & Automation to handle preventive maintenance, troubleshooting, and repair of robotic assembly systems. The role involves working with PLCs, drive systems, vision systems, and various sensing devices to ensure efficient and reliable production operations. Key Responsibilities:1. Preventive Maintenance Perform scheduled preventive maintenance on robotic assembly equipment to ensure optimal performance and minimize downtime. Regularly inspect equipment to detect and address wear and tear proactively. 2. Troubleshooting and Repairs Diagnose and repair faults in robotic systems. Troubleshoot Programmable Logic Controllers (PLCs) and resolve communication issues between different PLC systems. 3. Vision System Maintenance Maintain, calibrate, and troubleshoot vision systems used for quality control in the assembly line. Ensure accuracy and reliability of machine vision systems. 4. Drive Systems Maintain and troubleshoot Siemens Drives, SEW Drives, and other motion control systems. Perform parameter setup, fault diagnostics, and ensure optimal operation of drive systems. 5. Sensing Devices Install, maintain, and troubleshoot various sensing devices including proximity sensors, photoelectric sensors, and safety devices. Ensure accurate sensing for machine automation and safety. 6. Electrical Hoists Perform maintenance and repairs on electrical hoists used within the production facility. Ensure operational safety and compliance with handling standards. 7. Documentation Maintain detailed records of maintenance activities, repairs, spare parts usage, and equipment performance logs. Update machine history and ensure compliance with maintenance schedules. 8. Safety Compliance Adhere to company safety policies, lockout/tagout procedures, and legal regulations. Identify, report, and mitigate any safety hazards in the work environment. Desired Qualifications: Diploma or BE/BTech in Electrical, Electronics, Mechatronics, or relevant discipline. Experience: Minimum 5–8 years in maintenance of robotic assembly equipment and automation systems. Technical Skills: Proficiency in PLC troubleshooting (Siemens, Allen Bradley, Mitsubishi, etc.). Experience with Siemens Drives, SEW Drives, and other motion control systems. Hands-on experience with vision systems (Cognex, Keyence, etc.). Strong understanding of sensors, actuators, and industrial automation components. Ability to interpret and work with electrical schematics and control diagrams. Soft Skills: Problem-solving ability with strong analytical thinking. Effective communication and teamwork skills. Ability to work under pressure and manage priorities during downtime situations. Work Model: On-site, full-time. Shift work may be required based on operational needs.

Job Title: Robotic Maintenance Engineer / Technician Department: Maintenance / Automation Reporting To: Maintenance / Production Manager Job Summary: The Robotic Maintenance Engineer will be responsible for the upkeep, troubleshooting, and repair of robotic assembly systems and associated automation equipment. This includes preventive maintenance, drive systems, PLC troubleshooting, vision systems, sensing devices, and electrical hoists. The role ensures maximum equipment reliability and operational efficiency. Key Responsibilities:1. Preventive Maintenance: Perform scheduled preventive maintenance on robotic assembly equipment. Ensure optimal functioning and extended lifespan of equipment. 2. Troubleshooting and Repairs: Diagnose faults and perform repairs on robotic systems. Troubleshoot PLCs, resolve communication issues between PLC systems, and restore equipment to operation. 3. Vision System Maintenance: Maintain and troubleshoot vision systems used for quality inspection on the assembly line. Ensure accuracy and reliability of vision-based inspections. 4. Drive Systems: Maintain, troubleshoot, and repair Siemens Drives and SEW Drives. Ensure smooth and efficient operation of motor control systems. 5. Sensing Devices: Install, maintain, and troubleshoot various industrial sensing devices such as proximity sensors, photoelectric sensors, pressure switches, and encoders. Ensure sensors are accurately detecting and functioning as intended for safe and efficient operations. 6. Electrical Hoists: Perform regular maintenance and repair of electrical hoists used in assembly and material handling. Ensure safe and reliable operation following industry standards. Required Skills and Qualifications: Education: Diploma / BE / BTech in Electrical, Electronics, Mechatronics, or a related field. Experience: 3–8 years of experience in robotic equipment maintenance or industrial automation maintenance. Technical Skills: Experience with PLC troubleshooting (Siemens, Allen Bradley, Mitsubishi, etc.). Knowledge of Siemens Drives, SEW Drives, and motor control systems. Ability to maintain and troubleshoot vision inspection systems (e.g., Cognex, Keyence, Omron). Familiarity with various sensing devices used in industrial automation. Hands-on experience in maintenance and repair of electrical hoists. Soft Skills: Strong problem-solving abilities. Excellent attention to detail. Ability to work independently or within a team. Good communication skills. Proactive attitude towards safety and process improvement. Other Requirements: Willingness to work in shifts, including night and weekend shifts when required. Strong adherence to safety protocols and company standards. Ability to document maintenance tasks, issues, and resolutions effectively. Employment Type: Full-time

Job Title: Robotic Maintenance Technician / Engineer Department: Maintenance / Automation Reporting To: Maintenance Manager / Engineering Supervisor Job Purpose: Responsible for ensuring the smooth operation of robotic assembly lines through preventive maintenance, troubleshooting, and repair of critical equipment, including PLC systems, drive systems, vision systems, sensors, and electrical hoists. Key Roles & Responsibilities:1. Preventive Maintenance: Perform scheduled preventive maintenance on robotic assembly equipment. Ensure optimal performance and extend the life of machinery and equipment. 2. Troubleshooting and Repairs: Diagnose and repair faults in robotic systems. Perform PLC troubleshooting, including resolving communication issues between different PLCs (Siemens, Allen Bradley, etc.). 3. Vision System Maintenance: Maintain and troubleshoot vision systems used in the assembly process (Cognex, Keyence, Omron, etc.). Ensure accurate quality control and error-free inspection. 4. Drive Systems: Troubleshoot and maintain Siemens Drives and SEW Drives. Ensure drives operate smoothly for efficient production with minimal downtime. 5. Sensing Devices: Install, maintain, and troubleshoot various sensing devices like proximity sensors, photoelectric sensors, pressure sensors, etc. Ensure proper functioning for safe and accurate operation of machines. 6. Electrical Hoists: Perform regular maintenance and repairs on electrical hoists. Guarantee safe and reliable operation of lifting and material handling equipment. Qualifications & Skills: Education: Diploma / BE / BTech in Electrical, Electronics, Mechatronics, Instrumentation, or related field. Experience:3 to 8 years of experience in industrial automation, robotic maintenance, or related areas. Technical Skills: Proficient in PLC troubleshooting and programming basics. Hands-on experience with Siemens Drives, SEW Drives, and communication networks. Knowledge of vision systems troubleshooting. Familiar with installation and maintenance of industrial sensors and hoists. Soft Skills: Strong analytical and troubleshooting abilities. Excellent communication and teamwork skills. Ability to work under pressure and meet deadlines. Commitment to safety, quality, and continuous improvement. Other Requirements: Willingness to work in shifts and during machine breakdown emergencies. Maintain accurate maintenance records. Adhere strictly to company safety standards and operational protocols. Employment Type: Full-time / Onsite

Job Title: Electrical Engineer – Pipeline Projects Department: Engineering / Projects Reporting To: Project Manager / Lead Electrical Engineer Job Purpose: To lead and support the design, installation, commissioning, and troubleshooting of electrical systems associated with cross-country pipeline infrastructure, including pumping stations, control systems, and safety mechanisms. Key Roles & Responsibilities: Develop detailed plans, checklists, and procedures for commissioning of electrical systems for cross-country pipeline projects. Review and validate electrical designs to ensure compliance with project specifications, industry standards, and safety regulations. Support the procurement process by evaluating and ensuring the technical suitability of electrical equipment. Design and oversee the installation of electrical systems for Positive Displacement (PD) pumps, transformers, Motor Control Centers (MCCs), Variable Frequency Drives (VFDs), Programmable Logic Controllers (PLCs), SCADA systems, and Cathodic Protection (CP) systems. Integrate sensors (pressure, density, flow, etc.) with SCADA for real-time pipeline monitoring and control. Program PLCs to automate pump operations, including setting up safety interlocks, alarms, and failsafe operations. Design and implement grounding systems and lightning protection for pipeline stations and CP stations to ensure asset and personnel safety. Troubleshoot and resolve electrical issues during installation and commissioning activities. Collaborate closely with multi-disciplinary teams, vendors, and contractors to ensure seamless project execution. Prepare technical documentation, reports, and as-built drawings related to electrical works. Desired Candidate Profile: Qualification: Bachelor’s Degree in Electrical Engineering (BE/B.Tech) or equivalent. Experience: 5 to 10 years in electrical engineering, preferably in oil & gas, pipeline, or infrastructure projects. Key Skills Required: Strong expertise in pipeline electrical systems, pumping station infrastructure, and SCADA/PLC automation. Hands-on experience with transformers, MCCs, VFDs, CP systems, grounding, and lightning protection systems. Familiarity with IEC, NEC, IS, API, and other relevant standards. Ability to develop commissioning procedures, troubleshooting guides, and project documentation. Proficient in reading and interpreting electrical schematics, control diagrams, and P&IDs. Problem-solving mindset with strong analytical and communication skills. Knowledge of HSE (Health, Safety, Environment) compliance in industrial projects. Work Model: Full-time | Onsite / Field Based

Responsibilities Supervise on-site activities like panel installation, cable laying, terminations & equipment setup. Perform loop checking, signal verification, and calibration of field instruments. Collaborate with the engineering team to troubleshoot and resolve PLC and SCADA issues. Participate in Factory Acceptance Tests (FAT) to ensure system functionality and compliance. Participate in Site Acceptance Tests (SAT) to confirm successful system performance on-site. Serve as the client contact from site, ensuring effective communication and satisfaction. Manage AMC tasks, including system inspections, preventive maintenance, and repairs. Ensure safety standards and regulations are followed during commissioning activities. Role Requirements Degree/Diploma in Electrical & Electronics Engineering, Electronics and Instrumentation Engineering, Electronics & Communication Engineering, or any relevant field. 1+ years of experience in on-site commissioning of Industrial Control & Automation Systems. Strong experience in troubleshooting, configuring, and programming PLCs, HMIs, and SCADA systems. Knowledge of integrating field instruments (pressure, flow, level, temperature) with PLC/SCADA systems. Knowledge of integrating electrical switchgear, PCC, and MCC panels with PLC/SCADA systems. Proficiency in industrial protocols such as Modbus (RTU/TCP), Profibus, Profinet, Ethernet/IP, etc. Ability to perform loop checks, signal verification, and calibration during system commissioning. Knowledge in troubleshooting PLC programs written in Ladder Logic, Structured Text, and Function Block Diagram (FBD). Understanding of communication networks (Ethernet, Fiber Optic, RS232, RS485, etc.). Familiarity with engineering drawings, GA, electrical wiring diagrams, P&ID, etc. Strong analytical and problem-solving skills. Excellent communication and collaboration abilities in a cross-functional environment. Why Join CONSYST Embark on an exciting journey with Consyst, where we prioritize the growth and collaboration of our team through: Talent Cultivation: We believe in nurturing your skills and providing opportunities for personal and professional development. Innovative Projects: Join us in contributing to cutting-edge projects that shape the future of Industrial Control and Automation. Dynamic Team Environment: Become a valued member of our dynamic and collaborative team, where your contributions are recognized and celebrated. If you’re ready to take the next step in your career and make a substantial impact, seize the moment, and apply today! Elevate your career with Consyst – where your potential meets limitless possibilities! Location: Kochi Apply Now

Job Post: Inductive Automation Ignition Engineer Location: Kochi Years of Experience: 2+ We are looking for a passionate and skilled Ignition SCADA Engineer to join our Automation & Digitization team. The ideal candidate will have extensive experience in designing, developing, and deploying of solutions based on Ignition platform alongside expertise in PLC programming and IIoT integration. Job Overview This role focuses on developing cutting-edge Industrial Automation and Digitization solutions using Ignition platform. You will work on system development, testing, and commissioning, with opportunities to collaborate on international projects and provide innovative IIoT solutions. Key Responsibilities Development · Design and implement advanced SCADA solutions using Ignition (Vision and Perspective modules). · Integrate Ignition systems with PLCs, HMIs, and IIoT platforms. · Develop custom scripts and templates in Ignition to optimize system functionality and user experience. · Collaborate with clients to understand the requirements. Testing & Validation · Conduct thorough in-house testing and validation using simulation tools. · Validate data integrity and system behaviour across all integrated platforms. Technical Documentation · Prepare comprehensive project documentation, including architecture diagrams, tag configurations, and scripting references. Site Commissioning · Deploy and commission Ignition SCADA systems at client locations. · Provide remote (online) support for deployment and commissioning to customers and internal commissioning teams. Training & Mentorship · Provide training to customers and junior engineers. · Mentor team members on tools, techniques and best practices to foster a collaborative learning environment. Qualifications Education · B.Tech/BE in Electrical, Electronics, Mechatronics, or Instrumentation Engineering. Experience · Minimum of 2+ years of experience in Industrial Automation/Digitization with a focus on Ignition based application development. Skills · Expertise in Ignition SCADA development, including Vision, Perspective, and scripting (Python, SQL). · Proficient in configuring and managing Ignition Gateway, OPC connections, and Tag Historian. · Knowledge of PLC programming (STL, FBD, Ladder) and integration with Ignition SCADA. · Strong understanding of industrial communication protocols (Modbus RTU/TCP, Ethernet IP, PROFINET, OPC UA, MQTT). · Familiarity with IIoT technologies. · Excellent troubleshooting, collaboration, and communication skills. What We Offer · A collaborative and innovative work environment. · Ample opportunities for developing technical and soft skills through training programs. · Travel opportunities for international projects Competitive compensation and benefits package. Job Types: Full-time, Permanent Pay: ₹400,000.00 - ₹1,000,000.00 per year Benefits: Cell phone reimbursement Provident Fund Schedule: Day shift Supplemental Pay: Overtime pay Performance bonus Application Question(s): Have you completed Inductive Automation Ignition Course? What is your current CTC? What is your expected CTC? Total year of experience in this position? Do you have experience in Ignition? Are you ignition certified? Education: Bachelor's (Required) Work Location: In person

ob Summary: We are seeking a motivated and detail-oriented Junior Automation Engineer to assist in maintaining and improving automated systems and equipment. The role involves supporting the installation, troubleshooting, and repair of automation systems across production lines to ensure smooth operations and minimal downtime. Key Responsibilities: Assist in routine maintenance, troubleshooting, and repair of automation systems (PLCs, sensors, actuators, robots, etc.). Monitor system performance and assist in identifying opportunities for improvement. Support in installation and commissioning of new automation equipment. Collaborate with senior engineers to implement upgrades or modifications. Ensure all automation processes comply with safety and quality standards. Maintain documentation of system configurations, changes, and maintenance activities. Respond promptly to equipment breakdowns and support root cause analysis. Provide technical support to the production team for automation-related queries. Job Types: Full-time, Permanent Pay: From ₹300,000.00 per year Benefits: Cell phone reimbursement Food provided Health insurance Leave encashment Paid sick time Paid time off Provident Fund Schedule: Rotational shift Supplemental Pay: Overtime pay Performance bonus Shift allowance Yearly bonus Work Location: In person Application Deadline: 07/07/2025

Client: German MNC into Speciality Chemicals for their Manufacturing plant at Ankalewshar in Gujarat wish to hire the following Pl send cv to nair@shreeconsultancy.com with ctc expectation and notice period C ontact 9422081211/9545522210 ( thr whatsapp only as i am out of country) Sr Executive Engineer ( Instrumentation) Qualificaiton: Diploma or BE Instrumentation Experience : 4 to 8 Yrs Job Location: Ankalewshar Job responsibilities : 1. Installation, maintenance, repairs, overhauling, calibration, and testing knowledge of instruments connected with DCS system - Profibus PA/DP, Conventional 4-20mA; Temp,pressure,level transmitters, Simatic valve positioners, Mass flowmeters, Proximity switches, Flow switches, Magnetic level switches, Conversant with Digital bus like Profibus PA, Profibus DP, Modbus, Various Temperature sensors. PH, conductivity ,ETP instruments and standalone PLCs, Motion sensors, Proximity switches. 2. DCS Automation faults finding with minimum time. 3. Control valves - 2way, 3 ways with smart positioner installation, calibration and Maintenance, Communication with DCS hardware and software. 4. Actuated valves with feedback limit switch's connectivity with DCS Digital input, Digital output ,DCS Hook up, preparation of Junction box schedule. 5. Load weighing system calibration,Programimng and load cell alignment with profibus DP connectivity 6. Amtech,ABB,Siemens VFD installation maintenance and programming with profibus DP connectivity with DCS 7. Temperature controller- On/off, PID, Autotune programming , Lab instrument repairing 8. Motor protection device installation, maintenance & programming for various MCC feeders. 9. Perform condition monitoring, maintenance and troubleshooting of DCS Systems and Profibus communication network. 10. Assist in DCS logic development and Batch recipe development for new projects/ Expansion projects installation and commissioning with automation logic, safety interlocks , field wiring of power, signal and profibus cable network. 11. Good knowledge of field instrument hook up, field cabling, termination at location and commissioning . 12. Assist with instrument maintenance and calibration functions as per IMS system requirement 13. Plan and execute instrument engineering design for field devices and DCS 14. To ensure Password integrity of all Control systems and system access levels 15. Ensure sufficient stock of spare parts for Control Systems, Field instruments, workstation and Profibus Network and industrial ethernet. 16. Co-ordinate with user departments for coordination of maintenance/calibration activities 17. Ensure that vendors and contractors working with electrical safety compliance. 18. On-the-job-training of colleagues and trainees for new modifications/improvements 19. Perform routine/non routine work required by his line manager according to company procedures, including administrative or operational tasks. 20. Perform special or occasional duties, Emergency support to the working plant as required including assisting mechanical maintenance team members and special projects 21. Assist DCS siemens engineer to perform configuration and logic modifications, integration for both hardware and software to DCS and PLC control systems. Modifications will include sequential function charts, Continuou function chart, logic development , interlocks etc. 22. Create and modify P&ID, schematic and layout drawings using AutoCAD 23. Specify cabling and wire sizing for power and control wiring, per IS Code 24. Tuning of process control loops PIDs . 25. Calibrate and maintain mechanical, pneumatic, chemical, electrical and electronic process controls and measurement instrumentation to approved IMS procedures 26. Safely and efficiently execute daily tasks related to calibration and instrumentation activities 27. Executing preventative maintenance inspections on all instrumentation equipment 28. Interpret, evaluate, and document calibration test results 29. Provide sketches / redline drawings for changes made to equipment measurement systems 30. Instrument identification and calibration status 31. 5S team participation 32. IMS documentation 33. Electrical maintenance of MCC/PCC,Variable frequency drives of various utility Equipment’s like Atlas compressors, Bluestar chillers, Thermax thermic fluid heaters, Thermax boilers, Nuberg nitrogen plants, Cooling towers. 34. Knowledge of HT breakers, LT breakers, DG set controller, Synchronization panel controllers, Electrical Panel meters-VAW,KWh,PF , PF control panels 35. Knowledge of Excel, word to prepare and maintain various instruments specification, RFQs,reports, Logics, io list, network layout, cabling ,hardware etc. Job Types: Full-time, Permanent Pay: ₹700,000.00 - ₹1,000,000.00 per year Benefits: Cell phone reimbursement Food provided Health insurance Internet reimbursement Leave encashment Life insurance Paid sick time Paid time off Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person

To manage and oversee all electrical maintenance activities at the company site to ensure uninterrupted operation of electrical systems, equipment and machinery. Responsible for preventive and corrective maintenance, safety compliance, team management and continuous improvement in electrical reliability. Key Responsibilities:- Achieves electrical maintenance , Develop maintenance procedures and ensure implementation Meets operational goals by contributing the preventive maintenance for maintaining production, productivity, quality, and customer-service standards, completing audits, identifying trends, recognizing problems and determining appropriate system improvements and solutions. Ensures stable electrical supply by maintaining equipment and machinery. Supports engineering needs by responding to service requests for mechanical and electrical problems. Ensures compliance with all applicable codes and regulations and advises senior management on requirements. Maintains material and equipment supplies by regularly monitoring inventory levels, anticipating supply needs, placing and expediting electrical material orders and reviewing and approving invoices. Preserves equipment in good working order by following operating instructions, troubleshooting malfunctions, keeping supplies on hand, regularly performing preventive maintenance and promptly scheduling repairs. Keeps knowledge and skills current by participating in educational opportunities, reading professional publications, networking and participating in professional organizations. Liaison with electricity department Supervise, train and lead a team of electricians and technicians. Strong knowledge of systems (HT/LT), VFDs, PLCs, DG Sets, UPS Systems Job Type: Permanent Pay: ₹35,000.00 - ₹50,000.00 per month Benefits: Health insurance Provident Fund Schedule: Morning shift Supplemental Pay: Yearly bonus Work Location: In person

Tips: Provide a sum Key Responsibilities Develop, modify, and troubleshoot PLC programs (mainly Rockwell/Allen-Bradley – RSLogix 5000, Studio 5000). Configure and integrate Rockwell HMI/SCADA systems (FactoryTalk View, PanelView Plus). Execute on-site commissioning, testing, and support activities. Collaborate with electrical design and project teams to develop automation solutions. Prepare technical documentation including wiring diagrams, functional descriptions, and user manuals. Provide technical support to customers and service teams. Ensure projects are delivered on time, within scope, and aligned with safety and quality standards. Required Skills Strong knowledge of Rockwell PLCs (ControlLogix, CompactLogix). Experience in FactoryTalk View SE/ME, RSLogix 5000, and Studio 5000. Understanding of industrial communication protocols (EtherNet/IP, Modbus, etc.). Ability to read and interpret electrical schematics and control drawings. Problem-solving and troubleshooting skills in automation systems. Willingness to travel for project commissioning (if required). Qualifications Diploma/Degree in Electrical, Electronics, Instrumentation, or Mechatronics Engineering. 2–5 years of relevant experience in automation and control systems using Rockwell products. mary of the role, what success in the position looks like, and how this role fits into the organization overall. Skills: rslogix 5000,compactlogix,ethernet/ip,controllogix,modbus,automation,commissioning,factorytalk view se/me,allen-bradley,studio 5000,reading electrical schematics,troubleshooting,industrial communication protocols,programming foundations,rockwell plcs,problem-solving

Main Activities • Automation Management: Expertise in PLCs, SCADA systems, servo motors, and drives. • Identify processes for automation and conduct supplier identification and induction. • Perform technical evaluation and select suitable machines for automation. • Oversee installation and commissioning of new machines. • Plan maintenance and spares for optimal machine functionality. • Prepare annual budgets for automation and mechanization projects. • Monitor the health of machines/equipment and conduct preventive and predictive maintenance. • Analyse breakdowns, track MTBF (Mean Time Between Failures) / MTTR (Mean Time to Repair), and report. • Track and optimize the OEE (Overall Equipment Effectiveness) of machines. • L ead 5S and Kaizen initiatives to ensure continuous improvement. • Conduct regular audits to monitor the health of machines and equipment. • Prepare annual budgets for maintenance, TPM, and Kaizen activities. • Ensure compliance with EHS (Environmental, Health, and Safety) guidelines in daily activities, maintenance tasks, and project-related activities. Experience: 7 years+ relevant experience Qualification: B. tech or M. tech in Electrical/Electronics