1449 Plcs Jobs - Page 28

Job Title: Maintenance Engineer – Robotic & Automation Systems Department: Maintenance / Engineering Work Type: Full-Time | On-site Experience: 2–6 Years Job Purpose: To ensure the smooth operation of robotic assembly systems by performing preventive maintenance, troubleshooting faults, and maintaining critical components such as drives, vision systems, sensing devices, and electrical hoists. Key Responsibilities:1. Preventive Maintenance Execute scheduled preventive maintenance activities on robotic assembly equipment. Ensure machinery operates at peak performance while extending equipment life. 2. Troubleshooting and Repairs Identify, diagnose, and repair electrical/mechanical faults in robotic systems. Troubleshoot and resolve PLC-related issues, including communication between different PLCs. 3. Vision System Maintenance Perform routine maintenance and troubleshooting on machine vision systems used for quality inspection. Ensure optimal calibration and configuration for accurate detection and control. 4. Drive Systems Maintain and troubleshoot Siemens Drives and SEW Drives used in automation processes. Monitor performance, detect irregularities, and take corrective action. 5. Sensing Devices Install, maintain, and troubleshoot proximity sensors, photoelectric sensors, encoders, and other sensing equipment. Verify safe and accurate functioning within the automation system. 6. Electrical Hoists Maintain and repair electrical hoists and lifting mechanisms. Conduct safety inspections and ensure compliance with safety standards. Requirements: Diploma / B.E. / B.Tech in Electrical, Electronics, Mechatronics, or related engineering discipline. 2–6 years of hands-on experience in robotic system maintenance, especially in an industrial manufacturing environment. Skills & Competencies: Proficiency in troubleshooting PLC systems (Siemens, Allen-Bradley, etc.). Knowledge of robotic systems and automated machinery. Familiarity with vision systems (e.g., Cognex, Keyence) and sensing technology. Understanding of VFDs, drive systems, and hoisting mechanisms. Strong analytical, diagnostic, and documentation skills. Ability to work in shifts and respond to breakdowns swiftly. Preferred Qualifications: Exposure to automotive/robotic manufacturing industries. Knowledge of TPM, 5S, and industrial safety protocols. Basic knowledge of SCADA/HMI integration. Benefits: Competitive salary and performance incentives Opportunities for skill enhancement and certifications Medical insurance and shift allowances A dynamic and tech-driven work environment

Job Title: Automation Maintenance Engineer – Robotic Systems Department: Maintenance / Engineering Employment Type: Full-Time Experience Required: 2–6 Years Industry: Automotive / Industrial Automation / Manufacturing Job Summary: We are seeking an experienced Automation Maintenance Engineer to join our team. This role involves the preventive and corrective maintenance of robotic assembly equipment and associated automation systems. The ideal candidate should possess strong hands-on experience with robotics, PLCs, vision systems, drives, and sensing devices used in modern automated manufacturing lines. Key Responsibilities:1. Preventive Maintenance Execute routine preventive maintenance tasks on robotic assembly equipment. Minimize downtime and enhance machine longevity through proactive care. 2. Troubleshooting and Repairs Diagnose and repair faults in robotic systems and supporting automation components. Troubleshoot PLCs and resolve communication issues between multiple PLC units and networks. 3. Vision System Maintenance Maintain and calibrate vision systems (e.g., for part inspection or positioning). Address technical issues to ensure continuous and accurate quality inspection. 4. Drive Systems Service and troubleshoot Siemens and SEW drive systems. Ensure efficient motor control and power transmission in production lines. 5. Sensing Devices Install, test, and maintain sensors such as proximity, pressure, photoelectric, and encoder types. Ensure accuracy and reliability of all sensory inputs to control systems. 6. Electrical Hoists Perform routine maintenance and emergency repair on electrical hoists. Ensure lifting equipment meets operational and safety standards. Qualifications: Diploma / B.E. / B.Tech in Electrical, Electronics, Mechatronics, or related discipline 2+ years of experience in maintenance of automation/robotic equipment Strong understanding of PLC systems (Siemens, Allen Bradley, etc.) Experience with servo and drive systems (SEW, Siemens) Familiarity with industrial vision systems (Keyence, Cognex, etc.) Key Skills: PLC Troubleshooting & Communication Protocols Preventive Maintenance Planning Root Cause Analysis & Breakdown Maintenance Basic understanding of industrial safety standards Ability to interpret electrical and mechanical schematics Preferred Traits: Proactive and self-motivated with a problem-solving mindset Team player with good communication skills Ability to work in a high-paced, production-oriented environment Willingness to work in shifts (if applicable)

Job Title: Maintenance Engineer – Robotic Assembly Systems Department: Maintenance / Engineering Job Type: Full-Time | Onsite Experience Required: 2–6 years in industrial equipment maintenance Job Summary: We are seeking a skilled Maintenance Engineer to manage the preventive maintenance and troubleshooting of robotic assembly systems and associated automation equipment. This role is critical in ensuring high uptime and efficiency of the production line. Key Responsibilities:1. Preventive Maintenance Perform scheduled preventive maintenance on robotic assembly systems. Ensure machinery and equipment operate reliably and efficiently to minimize downtime. 2. Troubleshooting and Repairs Diagnose faults in robotic and automated systems. Troubleshoot and repair PLC issues and communication errors between various PLCs. 3. Vision System Maintenance Maintain and calibrate machine vision systems to ensure consistent quality inspection. Resolve issues affecting image acquisition, processing, and accuracy. 4. Drive Systems Maintain and troubleshoot Siemens and SEW Drives. Monitor drive performance and replace/repair faulty components as needed. 5. Sensing Devices Install, inspect, and troubleshoot sensors such as proximity sensors, photoelectric sensors, and encoders. Ensure sensors function reliably for safe and accurate process control. 6. Electrical Hoists Conduct routine inspection and repair of electrical hoists. Ensure lifting systems meet safety standards and operational requirements. Candidate Requirements: Diploma / B.E. / B.Tech in Electrical, Electronics, Mechatronics, or related field. Minimum 2 years of hands-on experience in robotic and automation equipment maintenance. Solid understanding of PLC systems (Siemens, Allen-Bradley, etc.) Working knowledge of VFDs, drives, and industrial sensors. Experience with machine vision systems is highly desirable. Familiarity with maintenance tools, safety standards, and troubleshooting techniques. Key Skills: Robotic system maintenance PLC diagnostics and communication Vision system troubleshooting Drive system (Siemens, SEW) maintenance Electrical safety and hoist equipment knowledge Preventive and corrective maintenance planning Strong problem-solving and analytical abilities Preferred: Experience in automotive or electronics manufacturing industries Knowledge of SCADA/HMI interfaces TPM, Kaizen, and 5S practice awareness

Job Title: Maintenance Engineer – Robotics & Automation Department: Maintenance / Engineering Employment Type: Full-Time Experience Level: 2–6 Years Industry: Automotive / Manufacturing / Industrial Automation Job Summary: We are looking for a skilled Maintenance Engineer with hands-on experience in robotic assembly equipment and automation systems. The role involves performing preventive maintenance, diagnosing faults, and ensuring optimal performance of robotic systems, drives, sensors, and auxiliary electrical components. Key Responsibilities:1. Preventive Maintenance: Perform scheduled preventive maintenance on robotic assembly lines to minimize downtime and extend equipment life. Maintain maintenance logs and ensure adherence to maintenance schedules. 2. Troubleshooting and Repairs: Diagnose and repair mechanical and electrical issues in robotic systems. Troubleshoot PLCs and resolve inter-PLC communication failures. 3. Vision System Maintenance: Maintain and troubleshoot vision inspection systems to support quality assurance on the assembly line. Calibrate and optimize system performance regularly. 4. Drive Systems: Maintain and troubleshoot Siemens and SEW drives used in various automation equipment. Conduct performance checks and replace/repair faulty components as required. 5. Sensing Devices: Install, maintain, and troubleshoot proximity sensors, photoelectric sensors, and other sensing devices for process control and safety. Ensure sensors are correctly integrated with control systems. 6. Electrical Hoists: Maintain, inspect, and repair electrical hoists and lifting systems. Conduct load testing and ensure compliance with safety regulations. Qualifications: Diploma / B.E. / B.Tech in Electrical, Electronics, Instrumentation, or Mechatronics Engineering. 2–6 years of relevant experience in maintenance of automation and robotic equipment. Skills & Competencies: Strong knowledge of PLC troubleshooting (Siemens, Allen-Bradley preferred). Experience with robotic systems (e.g., Fanuc, ABB, KUKA) is an advantage. Hands-on experience with VFDs and servo drive systems. Familiarity with vision systems (e.g., Cognex, Keyence). Good understanding of industrial safety practices and standards. Preferred Attributes: Excellent problem-solving and root-cause analysis skills. Ability to work under pressure and in rotating shifts. Strong documentation and reporting skills. Benefits: Competitive compensation package Health and safety benefits Training and development opportunities Exposure to advanced robotics and automation technologies

HiTorq Motion Systems (a subsidiary of Specx Technologies Pvt Ltd) is seeking a visionary Co-Founder to lead and shape our journey in industrial automation, robotics, and motion systems . This is a high-impact equity-based leadership role for someone passionate about building scalable, tech-first solutions for the future of smart manufacturing and robotics in India. Responsibilities Lead design and development of intelligent automation and robotic systems Architect control systems using PLC, SCADA, VFD, and embedded logic Build servo and actuator-driven motion platforms for industrial and robotic applications Develop and test robotic arms, AGVs, and precision motion assemblies Collaborate with mechanical, electrical, and software teams for integrated mechatronics systems Drive technical innovation, prototyping, and MVP launches Represent HiTorq in R&D partnerships, pilot projects, and investor forums Contribute to IP strategy, roadmap planning, and technical hiring Qualifications B.Tech / M.Tech in Mechatronics, Robotics, Mechanical, Electrical, or Embedded Systems 4–10 years of experience in automation, motion systems, or robotics (SPMs, AGVs, SCARA, etc.) Proficiency with servo drives, PLCs (Siemens/Allen Bradley/Mitsubishi), and control software Familiarity with ROS, embedded controllers, feedback sensors, and IoT integration Startup experience, product development, or R&D exposure preferred Entrepreneurial mindset with hands-on leadership skills Strong problem-solving ability and a desire to innovate in real-world settings What You’ll Get Co-founder equity and leadership role in a deep-tech subsidiary Access to Specx Technologies’ ecosystem for infrastructure, funding, and market reach Flexibility and autonomy to drive product and tech roadmap Real ownership of the company’s future — not just a title 📍 Location Vadodara / Bharuch | On-site or Hybrid 📩 To Apply Send your profile or startup pitch to: 📧 arun@specxt.com 📞 +91-7600-23-7600

Design and develop electrical control panels including layout, wiring diagrams, and bill of materials. Create detailed schematics using AutoCAD Electrical or EPLAN. Select electrical components based on project specifications and standards. Prepare GA drawings, terminal schedules, interconnection diagrams, and cable lists. Ensure compliance with international and national standards (IEC, IS, UL, CE). Support the production team during panel fabrication, wiring, and internal QA/QC checks. Collaborate with procurement, mechanical, and project teams for seamless execution. Perform load calculations and ensure proper component sizing and panel ventilation. Prepare and maintain documentation for design approvals, FAT, and project handover. Requirements Diploma or Bachelor's Degree in Electrical Engineering or related field. 2–5 years of experience in electrical panel design. Proficiency in AutoCAD Electrical / EPLAN / SolidWorks Electrical. Knowledge of industrial control systems (PLCs, VFDs, contractors, relays, etc.). Strong understanding of electrical safety standards and best practices. Ability to work under pressure and meet tight deadlines.

Description The Electrical Maintenance Technician is responsible for maintaining, troubleshooting, and repairing CNC machines and robotic systems to ensure optimal equipment availability and performance. This role involves working with advanced automation systems, including PLCs, HMIs, and industrial robots, while adhering to Cummins’ safety, quality, and operational standards Key Responsibilities: Health, Safety & Environmental (HSE): Immediately report any injury hazards or incidents. Comply with all HSE standards, policies, and regulations. Use appropriate PPE and promote a culture of safety and interdependence. Participate in HSE training and continuous improvement initiatives. Quality & Maintenance Perform electrical maintenance and troubleshooting on CNC machines and robotic systems. Conduct preventive, corrective, and predictive maintenance activities. Support equipment uptime and failure analysis. Follow diagrams, manuals, and specifications using appropriate tools and instruments. Maintain documentation and provide feedback for continuous improvement. Operations & Delivery Execute electrical repairs in compliance with applicable codes and standards. Maintain clean and organized work areas. Schedule maintenance activities around production needs. Participate in TPM and continuous improvement initiatives. Teamwork & Communication Collaborate effectively with cross-functional teams. Participate in training and development programs. Communicate issues and solutions clearly to peers and supervisors. Responsibilities Qualifications: High school diploma or equivalent; technical certification preferred. Licensing may be required for compliance with export controls or local regulations Core Competencies Collaborates: Works well in team environments. Communicates Effectively: Adapts communication to different audiences. Customer Focus: Delivers customer-centric solutions. Decision Quality: Makes timely and effective decisions. Drives Results: Achieves goals under pressure. Nimble Learning: Learns from both successes and failures. Values Differences: Embraces diverse perspectives and cultures. Functional Competencies Health and Safety Fundamentals Controls Safety Electrical System Troubleshooting Factory Automation and Control Systems Machine Programming Manufacturing Knowledge Qualifications Skills & Experience: Technical Skills Hands-on experience with breakdown and troubleshooting of CNC machines. Strong knowledge of Siemens, Mitsubishi, and Fanuc CNC systems. Proficient in Siemens PLC and HMI programming. Familiar with SCADA systems, electrical logic, and VFDs. Experience with machine backup, upload/download, and understanding of machine sequences. Hands-on troubleshooting experience with KUKA and ABB robots. Robot programming experience is a plus. Knowledge of electronic measuring systems and devices.

SUMMARY Exciting Opportunity for Industrial Electricians in Germany! Your Role: Install, maintain, and repair industrial electrical systems for machinery and equipment. Work with circuit breakers, control panels, motor connections, and automation systems. Perform preventive and troubleshooting maintenance to minimize downtime. Diagnose and repair electrical faults using specialized testing equipment. Follow German electrical codes and safety standards. Collaborate with engineers and technicians to execute projects effectively. Maintain detailed records of work performed and report any safety concerns. Timeline for Migration: 1. Application to Selection: Not more than 5 days 2. German Language Training: 4 months 3. Visa Processing & Departure: 2-3 months Start working in Germany within 6 months! Requirements Who Can Apply? Educational Qualification: ITI/Diploma in Electrical Engineering (B.Tech graduates are NOT eligible). Experience: Minimum 2.5 years of industrial electrical experience. Age Limit: 18 to 35 years. Technical Skills: Hands-on experience with high-voltage systems, PLCs, schematics, and troubleshooting. Certifications: Valid Electrician License (Preferred but not mandatory we provide guidance). Language: Basic English proficiency required, German knowledge is a plus (we provide German language training!). Willingness to Relocate: Excited to work in Germany with relocation support provided! Even if you don’t meet all requirements, apply now and let our experts assess your eligibility! Benefits Why Choose This Opportunity? High Salary & Perks: Starting Salary: 2,500 3,000/month ( 2.1 - 2.6 Lakh INR) After 2-3 years: 3,500 4,500/month ( 3 - 3.9 Lakh INR) Overtime and additional bonuses available Career Growth: Fast - track promotions, skill development, and work with advanced electrical systems. Opportunity to get permanent residency in Germany after 5 years! Relocation Support: Visa assistance, accommodation guidance, and onboarding support provided. German language training to boost your employability. Hands-on Training: Learn new automation technologies, industrial systems, and German safety protocols. International Work Experience: Boost your resume with German industry expertise. Permanent Work Contracts: Long-term stability with retirement benefits and social security. Government-Funded Training: Get access to free Adaptation Qualification Courses covering technical training, German work practices, and safety protocols. Comprehensive Health Insurance: Full medical coverage for you and your family under Germany’s healthcare system. Family Reunification: Bring your spouse and children to Germany once you receive full vocational recognition. Driver’s License Support: Guidance on converting or obtaining a German driving license for enhanced job opportunities. Upgrade to Meister Certification: After gaining experience, electricians can pursue the Meister qualification, leading to management roles and higher salaries ( 6,941 or 6,59,082 INR/month). Housing Assistance: Support in finding accommodation with potential eligibility for German housing benefits to lower rental costs. Tax Benefits for Families: Receive 255 / INR 24,213 per child as a government child benefit while working in Germany. Path to Citizenship: Become eligible for German permanent residency in 3 years and citizenship in 5 years for long-term security. Limited slots available! Apply now to secure your place in the next batch of skilled electricians migrating to Germany!

Job Summary The Instrumentation Engineer is responsible for designing, developing, installing, and maintaining instrumentation and control systems used in dairy processing facilities. This includes ensuring the accuracy and reliability of instruments used for measuring, monitoring, and controlling production parameters to maintain product quality, efficiency, and regulatory compliance. Key Responsibilities Instrumentation Design and Maintenance: Design and select instrumentation for dairy processing plants, including temperature, pressure, flow, and pH sensors. Install, calibrate, maintain, and troubleshoot process control instruments. Ensure all instruments meet industry standards and regulatory requirements. Process Automation: Develop and implement automated control systems to optimize production processes. Program and maintain PLCs (Programmable Logic Controllers), SCADA (Supervisory Control and Data Acquisition) systems, and HMIs (Human-Machine Interfaces). Compliance and Documentation: Maintain accurate records of instrument calibration, maintenance schedules, and modifications. Ensure compliance with food safety standards (e.g., FSSAI, HACCP) and industry-specific regulations. Monitoring and Optimization: Analyze process data to ensure instruments are functioning correctly and processes are efficient. Identify and address areas for improvement to minimize downtime and enhance productivity. Collaboration: Work closely with production, quality, and maintenance teams to ensure seamless operations. Train plant staff on the correct use and maintenance of instrumentation systems. Safety: Adhere to safety protocols while working with instruments and control systems. Ensure that all instruments are installed and maintained in a manner that does not compromise operator safety or product integrity. Skills And Qualifications Educational Background: Bachelor’s degree in Instrumentation Engineering, Electrical Engineering, Electronics, or a related field. Experience: 3–5 years of experience in instrumentation and automation, preferably in the dairy or food processing industry. Hands-on experience with PLCs, SCADA systems, and industrial automation equipment. Technical Skills: Proficiency in programming and troubleshooting PLCs (Siemens, Allen-Bradley, etc.). Knowledge of dairy plant operations, including pasteurizers, homogenizers, evaporators, and CIP systems. Familiarity with control systems, data loggers, and analytical instruments. Soft Skills: Strong problem-solving and analytical abilities. Excellent communication and teamwork skills. Attention to detail and a proactive approach to challenges.

Job Title: Electrical Engineer – Semiconductor Equipment (Deposition & Etching) Location: Mohali Experience: 3-5 Years About Aether Semiconductor: Aether Semiconductor is a leader in the semiconductor equipment industry, delivering advanced solutions for deposition and etching technologies. We are seeking an experienced Electrical Engineer to join our team and support the development of high-performance semiconductor equipment. Key Responsibilities: Design, develop, and troubleshoot AC/DC power boxes and small electrical assemblies for semiconductor equipment. Collaborate with cross-functional teams to integrate electrical systems into deposition and etching tools. Create and review electrical schematics, layouts, and technical documentation using CAD tools. Work on electrical system performance, reliability testing, and compliance with safety standards. Provide support for controller selection, integration, and programming in semiconductor tools. Diagnose and resolve electrical issues in prototypes and fielded equipment. Evaluate and source electrical components while ensuring compliance with industry regulations and standards. Stay informed about emerging trends and technologies in semiconductor equipment design and development. Required Skills and Qualifications: Bachelor’s or Master’s degree in Electrical Engineering or a related discipline. 3-5 years of experience in the semiconductor equipment industry, particularly in deposition and etching tools. Hands-on experience with AC/DC power boxes, power supply systems, and small electrical assemblies. Strong understanding of industrial controllers (e.g., PLCs, microcontrollers) and their integration into equipment. Proficiency with electrical CAD tools such as Altium, OrCAD, or similar. Familiarity with troubleshooting tools like oscilloscopes, multimeters, and power analyzers. Knowledge of electrical safety standards and compliance (e.g., CE, UL). Experience with analog and digital circuit design. Strong problem-solving skills and the ability to work effectively in a fast-paced environment. Excellent communication skills, both verbal and written. Preferred Skills: Experience with FPGA or embedded programming. Knowledge of semiconductor manufacturing processes and equipment operation. Exposure to high-voltage and high-current systems. What We Offer: Competitive salary and benefits. Opportunity to work on cutting-edge technologies in the semiconductor domain. A collaborative and innovative work environment. Professional growth through training and development programs. If you are an enthusiastic Electrical Engineer looking to advance your career in the semiconductor industry, we invite you to apply. To Apply: Manisha.Kapkoti@aethersemiconductors.com

Job Title: Instrumentation Engineer Department: Engineering / Maintenance Location: Dewas, Madhya Pradesh Reports To: Plant Maintanence Manager Job Summary The Instrumentation Engineer is responsible for ensuring optimal performance and reliability of all instrumentation and control systems within the dairy processing plant. This role involves the installation, calibration, maintenance, and troubleshooting of field instruments, PLC systems, SCADA, and automation equipment used in milk processing, CIP systems, pasteurizers, homogenizers, refrigeration units, and packaging lines. Key Responsibilities Instrumentation Maintenance & Calibration: Install, calibrate, and maintain sensors, transmitters, flow meters, pressure gauges, temperature sensors, and other field instruments. Ensure instruments are compliant with food safety, quality, and calibration standards (e.g., ISO, FSSAI, GFSI). Automation Systems Support: Troubleshoot and support PLC, SCADA, and HMI systems used in automated dairy processes. Assist in modifying control logic for process improvements or product changes. Process Optimization: Collaborate with production and quality teams to optimize process parameters for efficiency, yield, and product consistency. Monitor real-time data and identify areas for automation or energy-saving improvements. Project Execution: Participate in CAPEX projects related to new equipment or plant upgrades. Ensure proper instrumentation is specified and integrated into new systems. Documentation & Compliance: Maintain calibration records, instrument datasheets, and loop diagrams. Ensure compliance with GMP, HACCP, and other regulatory requirements. Training & Support: Provide technical support to operators and maintenance staff. Conduct training sessions on basic instrumentation handling and first-level troubleshooting. Qualifications & Skills Bachelor’s Degree in Instrumentation Engineering / Electronics & Instrumentation / EEE or related field. 2–5 years of experience in instrumentation or automation within a food or dairy processing environment. Strong knowledge of PLCs (Siemens, Allen Bradley, etc.), SCADA systems, and control loops. Familiar with process instruments (flow, level, pressure, temperature) and calibration procedures. Understanding of dairy processes like pasteurization, CIP, fermentation, UHT, and filling lines. Problem-solving mindset with good analytical and troubleshooting skills. Strong communication and documentation skills.

Job Summary The Instrumentation Engineer is responsible for ensuring the proper functioning, calibration, and maintenance of all instruments and automation systems used in the dairy industry. This role involves the installation, inspection, troubleshooting, and optimization of instrumentation equipment to ensure the efficient, safe, and hygienic operation of dairy production processes. Key Responsibilities Maintenance and Calibration Calibrate and maintain process control instruments such as flow meters, pressure sensors, temperature controllers, pH meters, and conductivity meters. Ensure all equipment adheres to industry standards for hygiene, accuracy, and reliability. Perform preventive and corrective maintenance to minimize downtime. Installation and Commissioning Oversee the installation of new instrumentation systems in compliance with industry regulations. Test and commission equipment to ensure proper functionality before use. Troubleshooting and Repairs Diagnose and resolve issues in instrumentation and control systems. Replace or repair defective components to restore system functionality. Automation and Control Systems Program, monitor, and troubleshoot PLCs, SCADA, and HMI systems used in dairy processes. Ensure automation systems are optimized for production efficiency and product quality. Documentation and Compliance Maintain accurate records of calibration, maintenance, and inspections. Ensure compliance with food safety standards (e.g., HACCP, ISO 22000) and industry regulations. Collaboration Work closely with the production, quality, and maintenance teams to ensure smooth operations. Assist in training plant operators and technicians on proper use and maintenance of instruments. Skills And Qualifications Educational Requirements: Bachelor’s degree in Instrumentation Engineering, Electronics, or a related field. Additional certifications in PLC/SCADA programming, calibration, or process control are a plus. Experience Minimum of 2-5 years of experience in instrumentation, preferably in the dairy or food processing industry. Familiarity with clean-in-place (CIP) systems and aseptic processes is an advantage. Technical Skills Proficiency in process control instrumentation and automation systems. Knowledge of dairy-specific machinery such as pasteurizers, homogenizers, evaporators, and spray dryers. Hands-on experience with PLCs (e.g., Siemens, Allen-Bradley) and SCADA systems. Understanding of industrial communication protocols (e.g., MODBUS, PROFIBUS, Ethernet/IP).

ELECTRICAL & INSTRUMENTATION ENGINEER Department: Maintenance / Engineering Reports To: Maintenance Manager Job Summary Responsible for the installation, maintenance, calibration, troubleshooting, and repair of all electrical and instrumentation systems within the dairy processing facility. Ensures reliable operation of control systems, motors, sensors, PLCs, and automation equipment to support continuous production and product quality. Key Responsibilities Perform preventive and corrective maintenance on electrical and instrumentation equipment. Troubleshoot and repair control systems including PLCs, VFDs, HMIs, SCADA, sensors, and field instruments. Maintain and calibrate process instruments such as flow meters, temperature sensors, pressure transmitters, level sensors, and conductivity meters. Assist in the design, installation, and commissioning of new equipment and control systems. Interpret electrical and control schematics, wiring diagrams, and P&IDs. Ensure all electrical and instrumentation work complies with food safety, GMP, and safety regulations. Support energy efficiency and automation improvement initiatives. Collaborate with production, quality, and utility teams to minimize downtime. Maintain records and documentation of maintenance work, calibration certificates, and modifications. Respond to emergency breakdowns and provide technical support during plant operations. Qualifications Diploma or Bachelor's in Electrical Engineering, Instrumentation Engineering, or related field. 3–5 years of experience in the food processing or dairy industry preferred. Strong knowledge of industrial automation systems (PLC, HMI, SCADA). Familiarity with standards such as HACCP, GMP, and food-grade electrical installations. Ability to work in a fast-paced, hygienic production environment. Hands-on experience with Allen-Bradley, Siemens, or Schneider systems is a plus.

Job Summary The Instrumentation Engineer in the dairy industry is responsible for designing, installing, calibrating, maintaining, and troubleshooting instrumentation and control systems used in dairy processing plants. The role ensures optimal performance of equipment, compliance with safety and quality standards, and improved efficiency in production processes. Key Responsibilities Instrumentation & Control System Management Design, install, and commission instrumentation and control systems for dairy processing equipment. Calibrate sensors, flow meters, temperature probes, pressure gauges, and other measurement devices. Develop and implement control strategies for automated dairy processing operations. Maintenance & Troubleshooting Perform routine inspections and preventive maintenance of instruments to ensure minimal downtime. Diagnose and repair faults in control systems, PLCs, SCADA, and other automation equipment. Ensure accurate measurement of parameters like temperature, pressure, flow, pH, and conductivity. Compliance & Documentation Ensure all instruments and control systems comply with dairy industry standards, including FSSAI, GMP, HACCP, ISO, and FDA. Maintain documentation of instrument calibration, maintenance schedules, and compliance reports. Assist in audits by regulatory authorities and provide necessary technical details. Process Optimization & Automation Work with production and quality teams to optimize dairy processing through automation. Support digitalization efforts, including IoT-enabled smart monitoring solutions. Identify areas for improvement in instrumentation to enhance efficiency and reduce waste. Safety & Training Ensure adherence to workplace safety protocols related to electrical and instrumentation systems. Train plant operators and maintenance staff on proper use and handling of instrumentation. Support risk assessments related to process control and automation systems. Required Skills & Qualifications Education: Bachelor’s or Diploma in Instrumentation Engineering, Electronics & Instrumentation, or a related field. Experience: 3-7 years in instrumentation and control systems, preferably in dairy or food processing. Technical Skills: Experience with PLC, SCADA, HMI, VFDs, and industrial automation systems. Knowledge of flow meters, pressure transmitters, RTDs, pH analyzers, and load cells. Familiarity with control panel wiring and electrical drawings. Understanding of calibration procedures and metrology. Software Proficiency: AutoCAD, MATLAB, and industrial control software. Certifications: ISA Certification, HACCP Training, or any relevant industry certification (preferred).

Job Title: Electrical Engineer – Dairy Industry Location: Shrirampur Reports To: Maintenance Manager Job Summary We are seeking a skilled and proactive Electrical Engineer to oversee the electrical systems and infrastructure at our dairy processing facility. The ideal candidate will be responsible for maintaining, troubleshooting, and optimizing electrical equipment and systems to ensure continuous production, safety, and compliance with industry standards. Key Responsibilities Maintenance & Troubleshooting: Maintain and troubleshoot electrical systems, including motors, drives (VFDs), PLCs, control panels, and power distribution systems. Respond to electrical breakdowns and conduct root cause analysis for recurring issues. Project Implementation: Design, plan, and execute electrical installations for new equipment or plant expansion. Assist in automation and electrical upgrades to improve plant efficiency. Compliance & Safety: Ensure compliance with electrical safety standards and food industry regulations. Maintain documentation of wiring diagrams, equipment manuals, and test results. Preventive Maintenance: Develop and implement preventive maintenance schedules for electrical assets. Collaborate with the maintenance team to minimize unplanned downtime. Energy Management: Monitor energy consumption and suggest energy-efficient solutions. Assist in planning and implementation of energy-saving projects. Team Collaboration: Support cross-functional teams in production, quality, and mechanical maintenance. Train technicians and operators on electrical safety and equipment handling. Qualifications Bachelor’s Degree in Electrical Engineering or related field. 3–5 years of experience in a manufacturing or dairy/FMCG environment. Hands-on experience with PLC systems (Siemens, Allen Bradley, etc.). Knowledge of automation systems, SCADA, and electrical safety standards. Familiarity with GMP, HACCP, and food industry standards is a plus. Preferred Skills Strong analytical and problem-solving skills. Excellent communication and documentation abilities. Familiarity with ISO, TPM, or other maintenance methodologies

Description The Electrical Maintenance Technician is responsible for maintaining, troubleshooting, and repairing CNC machines and robotic systems to ensure optimal equipment availability and performance. This role involves working with advanced automation systems, including PLCs, HMIs, and industrial robots, while adhering to Cummins’ safety, quality, and operational standards Key Responsibilities: Health, Safety & Environmental (HSE): Immediately report any injury hazards or incidents. Comply with all HSE standards, policies, and regulations. Use appropriate PPE and promote a culture of safety and interdependence. Participate in HSE training and continuous improvement initiatives. Quality & Maintenance Perform electrical maintenance and troubleshooting on CNC machines and robotic systems. Conduct preventive, corrective, and predictive maintenance activities. Support equipment uptime and failure analysis. Follow diagrams, manuals, and specifications using appropriate tools and instruments. Maintain documentation and provide feedback for continuous improvement. Operations & Delivery Execute electrical repairs in compliance with applicable codes and standards. Maintain clean and organized work areas. Schedule maintenance activities around production needs. Participate in TPM and continuous improvement initiatives. Teamwork & Communication Collaborate effectively with cross-functional teams. Participate in training and development programs. Communicate issues and solutions clearly to peers and supervisors. Responsibilities Qualifications: High school diploma or equivalent; technical certification preferred. Licensing may be required for compliance with export controls or local regulations Core Competencies Collaborates: Works well in team environments. Communicates Effectively: Adapts communication to different audiences. Customer Focus: Delivers customer-centric solutions. Decision Quality: Makes timely and effective decisions. Drives Results: Achieves goals under pressure. Nimble Learning: Learns from both successes and failures. Values Differences: Embraces diverse perspectives and cultures. Functional Competencies Health and Safety Fundamentals Controls Safety Electrical System Troubleshooting Factory Automation and Control Systems Machine Programming Manufacturing Knowledge Qualifications Skills & Experience: Technical Skills Hands-on experience with breakdown and troubleshooting of CNC machines. Strong knowledge of Siemens, Mitsubishi, and Fanuc CNC systems. Proficient in Siemens PLC and HMI programming. Familiar with SCADA systems, electrical logic, and VFDs. Experience with machine backup, upload/download, and understanding of machine sequences. Hands-on troubleshooting experience with KUKA and ABB robots. Robot programming experience is a plus. Knowledge of electronic measuring systems and devices. Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2416097 Relocation Package Yes

Rockwell Automation is a global technology leader focused on helping the world’s manufacturers be more productive, sustainable, and agile. With more than 28,000 employees who make the world better every day, we know we have something special. Behind our customers - amazing companies that help feed the world, provide life-saving medicine on a global scale, and focus on clean water and green mobility - our people are energized problem solvers that take pride in how the work we do changes the world for the better. We welcome all makers, forward thinkers, and problem solvers who are looking for a place to do their best work. And if that’s you we would love to have you join us! Job Description Job Summary: Provide competency in the area of Proposal Engineering for PLC / DCS, HMI / SCADA, VFD, Panel Design, and PCC/MCC (Ethernet, Devicenet, Profibus, and Modbus) to lead efficiency in execution. Create functional excellence in the area of Proposal Engineering. Organise and schedule Proposal tasks assigned to you to complete within time and with high quality. Use multiple procedures, tools and guidelines, perform several Proposal & Estimation support tasks. You will report to Team Lead. Your Responsibilities: Prepare cost-effective viable automation/Electrical technical proposal based on client / tender requirement by using Rockwell Automation control products. Ensure Proposals are delivered with good quality on time and on budget with high levels of Customer Satisfaction. Use multiple procedures, tools and guidelines, perform variety of Proposal & Estimation tools to prepare the high-quality proposal support. Prepare Rockwell products and third-party products BOM after going through client requirement. Prepare man hour estimation for each task. Prepare bottom-up costing for proposed solution. Participate in interdepartmental and client meeting for requirement and scope gathering. Maintain the confidentiality of sensitive and proprietary technical, financial and commercial information. Follow all applicable corporate, company, governmental, environmental, safety, quality and regulatory procedures for this position. Collaborate internally within Global Engineering Centre and externally with Regional teams to ensure on time delivery of proposals with quality. Ensure 100% meet technical items defined in project / RFQ. Ensure project implementation follows the procedure of RA engineering standards. Pursue continuous learning; develop knowledge in job-related technical or professional expertise, including increasing breadth and depth of expertise and keeping up-to-date with advances. The Essentials - You Will Have: Bachelors in Electrical /Instrumentation / Control / Electronics. 3 to 7 years of relevant experience in automation engineering on PLCs (Rockwell – Control Logix, PLC5, Compact Logix, Siemens, Schneider, ABB, and Mitsubishi). Working knowledge of Drives, PLC & MCC System Engineering. Sound Knowledge of Drives and PLC/DCS. Willing to work in 2nd shift (5:00 pm to 2:00 am). Need to have experience in preparing proposals and quotations. You must be ready to undergo 30% of business travel. The Preferred - You Might Also Have: Maintain all business systems for opportunities and proposals (Sharepoint, Bid Request, FTS, IFS, PWO & Track2Quote, MS-Office, MS Project). Must have exposure to Global Work style, engagement with Clients working from remote locations. Hands-on experience in designing, execution and selection of industrial automation products such as PLC / DCS, VFD, HMI / SCADA, Panel Design, Servo, Industrial communication (Ethernet, Devicenet, Profibus, and Modbus). Familiar with commercial and financial terminologies. Knowledge of best design practices, Industry standards and cost-effective solutions across globe. What We Offer: Our benefits package includes … Comprehensive mindfulness programmes with a premium membership to Calm. Volunteer Paid Time off available after 6 months of employment for eligible employees. Company volunteer and donation matching programme – Your volunteer hours or personal cash donations to an eligible charity can be matched with a charitable donation. Employee Assistance Program. Personalised wellbeing programmes through our OnTrack programme. On-demand digital course library for professional development. ... and other local benefits! At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right person for this or other roles. #LI-Hybrid #LI-RS1 Rockwell Automation’s hybrid policy aligns that employees are expected to work at a Rockwell location at least Mondays, Tuesdays, and Thursdays unless they have a business obligation out of the office.

Service Engineer – Metallography & Hardness Testing Are you looking for a long-term perspective in a successfully growing, profitable company? Then you've come to the right place! Verder Scientific Pvt Ltd, India is the local branch of Verder Scientific, a leading high-tech company in the field of sample preparation and analysis. We are a dedicated and motivated team of 66 people, located in Hyderabad, and represent the six brands of our group in the domestic market, providing laboratories with innovative, precise and efficient solutions: Retsch is our specialist in laboratory mills and sieving equipment. Microtrac develops leading solutions for particle characterization. Carbolite supplies high-performance laboratory ovens. Eltra enables precise elemental analysis. QATM takes care of metallographic sample preparation and hardness testing and ERWEKA is our producer of pharmaceutical testing devices.. Verder Scientific operates 13 production sites and eleven sales companies worldwide and are part of the German-Dutch technology group Verder, a group of companies with over 2000 employees around the globe. We believe that our journey is far from complete. We're looking for innovators and critical thinkers who are eager to challenge the status quo, are willing to contribute new ideas and take over responsibility. If you are passionate about your work and are looking for a position where you can make a tangible impact, we want you on our team. Doing what is fun Installation, maintenance, and calibration of metallography and hardness testing machines. Troubleshooting electronics and embedded systems. On-site and remote technical support. Preparing service documentation and reports. Supporting customers with training and technical queries. Qualifications Diploma / B.E. / B.Tech in Electronics, Instrumentation, or Mechatronics. Hands-on experience with testing equipment and calibration processes. Strong knowledge of analog/digital circuits and microcontroller-based systems. Willingness to travel and strong customer-facing skills. Additional Skills (Preferred): Experience with metallographic sample prep machines. Familiarity with PLCs, HMIs, or automation systems. Basic knowledge of metallurgy or material science. What we have to offer Competitive salary package Performance-based incentives and bonuses Comprehensive medical insurance Professional development opportunities with a global scientific instrumentation leader Chance to work with cutting-edge materials testing technology Collaborative and innovation-focused work environment Interested? An online application is the fastest way to success! We look forward to receiving your application! Verder Scientific Pvt. Ltd - Road No.1, Uppal Mandal - 500076 - Hyderabad, India Telephone contact: +91 4029806688

Job description Job Description: Assist in automating systems using PLCs, RTUs, SCADA & HMI Systems. Support in programming IoT devices, PLCs, and RTUs. Learn and work with Modbus and other protocols. Assist in troubleshooting installations and resolving issues. Contribute to creating automation cabling plans. Required Candidate Profile: Currently pursuing or completed a Diploma/BE in Electronics/Electrical/Instrumentation. Basic understanding of PLC and SCADA programming. A keen interest in automation design and control systems. Exposure to IoT & M2M concepts is a plus. Willingness to travel. Position based in New Delhi (Dwarka). Job Types: Full-time, Permanent, Fresher, Internship Contract length: 3 months Pay: From ₹12,000.00 per month Benefits: Health insurance Paid sick time Paid time off Provident Fund Work from home Schedule: Day shift Supplemental Pay: Performance bonus Quarterly bonus Yearly bonus Application Question(s): Are you currently in New Delhi? Work Location: In person

Roles and Responsibilities: Responsible for the installation, commissioning, and start-up of equipment and systems at client sites. Perform pre-installation checks , verify site readiness, and ensure all tools and equipment are available. Conduct functional testing and ensure proper configuration and calibration of equipment. Provide on-site technical support and troubleshooting during and after installation. Prepare and maintain installation, testing, and commissioning reports . Train clients and operators on equipment operation, basic maintenance, and safety procedures. Collaborate with internal teams (design, production, service) to resolve technical issues. Ensure work is performed in compliance with company quality standards and safety guidelines . Maintain clear communication with clients throughout the project for updates and issue resolutions. Provide after-sales support and respond to customer service requests as needed. Requirements: Diploma/Degree in Mechanical, Electrical, Instrumentation, or relevant engineering field. Strong troubleshooting and problem-solving abilities. Willingness to travel frequently to various client sites, both domestic and international if required. Good communication and client handling skills. Ability to work independently under minimal supervision. Knowledge of equipment controls, PLCs, or process systems (if applicable to your industry). Job Type: Full-time Pay: ₹12,000.00 - ₹15,000.00 per month Benefits: Cell phone reimbursement Provident Fund Schedule: Day shift Work Location: In person

We are seeking a knowledgeable and experienced PLC & SCADA Trainer to join our team. The ideal candidate will be responsible for designing, developing, and delivering training programs focused on Programmable Logic Controllers (PLCs) and Supervisory Control and Data Acquisition (SCADA) systems. The trainer will engage with participants, assess learning needs, and ensure effective knowledge transfer through hands-on exercises and practical demonstrations. Responsibilities: Design and develop training modules and materials for PLC and SCADA systems. Conduct training sessions both in-person and possibly through online platforms. Evaluate participants' performance and provide constructive feedback. Customize training programs to meet specific client or organizational needs. Keep abreast of industry trends, new technologies, and best practices in PLC and SCADA. Collaborate with other trainers and subject matter experts to enhance training effectiveness. Maintain training equipment and tools in good working condition. Provide technical support and guidance to trainees during and after training sessions. Qualifications: Bachelor's degree in Electrical Engineering, Automation, or related field (preferred). Proven experience working with PLCs and SCADA systems in industrial settings. Solid understanding of programming languages used in PLCs (e.g., ladder logic). Ability to explain complex technical concepts in a clear and understandable manner. Excellent communication and presentation skills. Certification in relevant PLC or SCADA technologies (preferred). Prior experience in delivering technical training programs is a plus. Skills: Technical proficiency in PLC programming and SCADA configuration. Strong analytical and problem-solving abilities. Organizational and time-management skills. Adaptability and willingness to learn new technologies. Job Types: Full-time, Fresher Pay: ₹8,000.00 - ₹12,000.00 per month Schedule: Day shift Monday to Friday Education: Bachelor's (Preferred) Experience: Teaching: 1 year (Preferred) Making lesson plans: 1 year (Preferred) total work: 1 year (Preferred) Language: English (Required) Work Location: In person

Operate, maintain, and improve automation systems (PLCs, HMIs, sensors, pneumatics). Troubleshoot electro-mechanical issues on ball pen tip production machines . Support installation, commissioning, and retrofitting of machines. Coordinate with production and maintenance teams for process optimization . Ensure preventive maintenance, safety, and machine uptime. Required Skills: Strong knowledge of PLC programming and mechatronic systems. Experience with servo motors, actuators , and industrial sensors . Ability to read and interpret technical drawings and wiring diagrams. Hands-on, analytical, and solution-oriented approach. Qualification: B.E. / B.Tech in Mechatronics Minimum 3 years of hands-on experience in an automated manufacturing setup . Job Type: Full-time Pay: ₹300,000.00 - ₹500,000.00 per year Benefits: Provident Fund Schedule: Day shift Supplemental Pay: Yearly bonus Work Location: In person

Job Title: Service Engineer Location: Pune Job Type: Full-time Experience: 1-5 years Job Summary: We are looking for a dedicated and technically skilled Service Engineer with a diploma in Electrical Engineering to join our team. The ideal candidate will be responsible for the installation, maintenance, troubleshooting, and repair of our equipment at client sites, ensuring customer satisfaction and operational excellence. Key Responsibilities: · Install, commission, and maintain electrical/electronic equipment at client locations. · Diagnose and troubleshoot electrical and mechanical faults in the field. · Provide on-site technical support and training to clients. · Maintain detailed service records and prepare reports. · Coordinate with internal teams for parts replacement and service support. · Ensure adherence to company safety protocols and quality standards. · Respond promptly to service requests and emergency breakdowns. · Conduct preventive maintenance visits as scheduled. · Keep up-to-date with product knowledge and technical developments. Requirements & Qualifications: · Strong problem-solving and analytical skills. · Good communication and customer-handling abilities. · Ability to work independently and travel to customer sites. · Time management and documentation skills. · Willingness to travel extensively (within the region or nationally). · Two-wheeler license preferred (if applicable). · Familiarity with safety protocols and industrial environments. · Diploma in Electrical Engineering (mandatory). · 1–3 years of relevant experience in service/maintenance (freshers with strong fundamentals may also apply). · Good understanding of electrical systems, wiring diagrams, and troubleshooting techniques. · Basic knowledge of PLCs, drives, or industrial automation is a plus. · Ability to read and interpret technical documents and schematics. Proficiency with hand tools, Multi-meters, and testing instruments

Coordinate operation activities during the shift to ensure that the plant is operated according to the demand. Plan and Coordinate operation & Maintenance activities at the plant and/or assigned team during the shift. Ensure that the performance targets of the plant are reached according to the contract in his own responsibility area. Train maintenance procedures and standards for the new workers. Ensure that the work is executed at the plant according to W rtsil Quality, Health, Safety, and Environmental guidelines and customer site procedures. Prioritize and assign tasks so that assigned team resources are used effectively and targets are met. Communicate with the grid control center and plant management about the loading of the plant. Maintain all operation & Maintenance records according to the Plant Management procedures & guidelines. Assist the superior as required. Develop the operation working routines at the plant. Follow all maintenance procedures according to Wartsila standards. Requirements: Educational Requirement: Diploma or BE Electrical. Experience : Minimum 5 years of experiencein power plants/marine/industrial environment at supervisory level Hands on experience of operating DG plant Expert knowledge of power plant electrical systems and equipment Understanding of predictive and preventive maintenance best practices Strong leadership, communication, and organizational abilities Proficiency with MS Office and maintenance data analysis Commitment to safety and operational excellence Valid C Licence or applied will be added advantage

Job Title: Electrical Design Engineer Key Responsibilities: Perform calculations and selection of low and medium voltage systems, including AC load calculations, protective devices, relays, cables, and electrical components based on application and design standards. Design low and medium voltage motor control systems (MCC), including solid-state systems. Develop industrial control and protection schemes for electrical distribution systems, motor controls, and electrical systems. Prepare single-line and three-line diagrams, panel IGA & OGA drawings, schematics, wiring diagrams, cable tray & wireway designs, and P&IDs as per customer specifications. Ensure compliance with UL508A, IEC, NEMA, BS, European, IS, NEC, IEEE, and other relevant standards. Design and test safety interlocks in compliance with NFPA and customer-specific safety regulations. Develop EPLAN symbols, metadata fields, macros, 3D macros, and drilling patterns. Create and update functional design specifications. Specify and size electrical equipment , prepare load lists, electrical calculations, cable schedules, and layout drawings. Utilize software such as AutoCAD Electrical, EPLAN, and SolidWorks Electrical. Interpret and review mechanical (P&ID, equipment layouts, piping, HVAC, PHE, fire protection), and ELV (BMS, SCADA, fire alarm, CCTV, public addressing, field instrumentation) drawings and layouts. Develop basic, detailed, and GFC (Good for Construction) single-line diagrams, ensuring proper relay protections, metering, operation, controls, safety interlocks, and redundancies. Work with relays, switchgear protection, transformers, cables, motors, VFDs, UPS, and soft starters. Prepare lighting, cable tray, earthing, lightning, and conduit/wiring drawings. Develop power & control cable schedules, tray sizing, and earthing schedules. Strong understanding of E&I equipment such as transformers, panels, cables, heat trace systems, PLCs/RTUs, control valves, and field instruments. Estimate BOQ/BOM for projects. Prepare RFQs with complete scope details, datasheets, specifications, drawings, and risk assessments. Review vendor technical submissions for technical compliance, contractual obligations, site installation, commissioning, and constructability. Qualifications & Experience: Bachelor’s degree in Electrical or Instrumentation Engineering. 5–10 years of relevant electrical design experience. Experience working in multi-disciplinary teams (process, mechanical, civil, structural, electrical, instrumentation, and piping). This role requires a highly skilled professional with strong technical expertise in electrical engineering, design coordination, and industry compliance. If you meet these qualifications, we encourage you to apply. For Apply please Email your resume to : Kiran@sedintechnologies.com