3427 Piping Jobs - Page 40

About The Position The Core Maintenance Planner is a team member of the Maintenance and Turnaround organization within the Chevron ENGINE Center and provides Maintenance Planning support to Chevron's Refining and Liquified Natural Gas (LNG) assets. The Core Maintenance Planner will collaborate across multiple levels of the organization, and with multi-discipline teams from Operations, Engineering, Maintenance, and Reliability disciplines. This position will develop detailed job plans and schedules to execute routine and project work. Responsibilities will include integrating non-turnaround planning/scheduling activities with Operations, Maintenance, and Technical; and integrating capital project planning/scheduling activities. Key Responsibilities Develop fully integrated electrical job planning step-outs, cost estimates, and job packages. Develop job scope definition with proper sequencing of tasks required and manpower loading for job execution Ensure planned activities are included in integrated work schedule through effective communication with Operations, Maintenance, Technical, and Turnaround Core Teams. Interface with Operators, Technical, Maintenance, Construction Contractors, and Management to complete committed work schedules and projects Incident and Injury free, on time and on budget. Procure materials and/or outside services through the Material Requisition process and/or Service Order process Ensure facility and HES standards are integrated into job plans and estimates. Candidates should have knowledge of all safe work practices and procedures (e.g., lock out / tag out, confined space entry, hot work, personnel protection, etc.) Track the physical progress of executed field work relative to baselines and provide reports to Management as required Define and quantify additional job scope via formal scope growth / change management process. Incorporate approved scope changes into execution plans. Provide the required communication to Management regarding captured scope growth or changes. Support the applicable planning / execution work process for assignment area (Routine Work Control / Centralized Maintenance, Control Maintenance Project) Required Qualifications Degree in Electrical Engineering or Maintenance Discipline Experienced electrical trade background Deep knowledge in electrical maintenance planning Strong estimating skill with a high degree of technical knowledge in the core craft disciplines Demonstrated knowledge and experience with Maintenance Work Management process which involves work prioritization, planning, estimating, scheduling, executing, and closing out maintenance work. Understands sequencing of tasks associated with maintenance of complex facility equipment including pressure vessels, piping, excavations, tanks, etc. Preferred Qualifications 5+ years of field experience supporting the planning and execution of maintenance activities in a complex processing facility Prior Maintenance Planning experience in Refineries and/or LNG facilities Proficient in Excel, JDE, SAP, Prometheus, Primavera P6 Demonstrated track-record of proactively identifying solutions to problems before they arise and developing contingency plans. Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law.

Chemelex is a global leader in electric thermal and sensing solutions, protecting the world’s critical processes, places and people. With over 50 years of innovation and a commitment to excellence, we develop solutions that ensure safety, reliability, and efficiency in diverse environments – from industrial plants and data centers to people’s homes. We deliver future-ready technologies, advanced engineering capabilities and local expertise backed by global standards. Our offering includes a leading portfolio from our trusted brands: Raychem, Tracer, Nuheat and Pyrotenax. We’re looking for people who put their innovation work to advance our success – and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. What You Will Experience In This Position In this position, you will get to: Preparation of various detail engineering: design and documentation for electrical heat system within engineering department. To carry out various electrical heat tracing detail engineering design and documentation. To carry out Electrical Power distribution engineering covering Cable selection, voltage drop calculations, Panel GA & wiring diagram review, EHT layouts, Single Line Diagram for EHT system Understanding and ability to work with Process P&ID’s, Piping ISO, Mechanical drawings, Instrument inputs etc. for EHT design. Responsible for Quality & accuracy within budgeted time & schedule. To interface with other team members, departments & with clients / suppliers. Exposure to 3D model Plant Electrical model, preferred but not essential. Responsible to handle Power Distribution Design-Engineering of Panel, Power distribution, C&M and FAT activities with Quality, within budgeted cost & schedule for Electrical Heat Tracing projects. To manage and handle multiple projects power distribution & C&M activities. Responsible for performance for high accuracy, schedule and budget for all projects Responsible for co-ordination with other departments (Estimation, Procurement, Projects), clients, suppliers and sites. Responsible for cost optimized design of project. Responsible to lead and allocate work to Engineers, Designers of various level Responsible for follow up with Hot scope lead for creating BFD, Design Guidelines – One Note & Lynx Project Set-up Responsible for planning & scheduling weekly requirements & deployments related to Power distribution Responsible for monitoring project progress , guide & support TL to take corrective step to meet schedule Responsible for Approval of various detail engineering design and documentation Responsible for “First Time Right” Responsible for supporting various development activities in the department To guide team members technically and in project execution To support Proposal for BOM and Costing when required Responsible for Techno-commercial optimized design & reports You Have Degree in Electrical Engineering Experience in Engineering : Industrial Electrical projects, experience in Power distribution, Panel and Electrical Heat Tracing Design Engineering /Field -Site services. 5 - 10 years+ experience in Electrical Power Distribution, Panel, Transformer engineering and Electrical Heat tracing (preference) etc Skills : Good communication skills , Team player, Confidence & Team player Tools : MS-Office, AutoCAD , exposure to 3D tools, advance in Excel (preference) At Chemelex We protect places of progress through electric excellence. Pioneering plants, sprawling data centers, busy transport hubs, and your own home. These are the places that bring progress to the world, and the places that we protect with time-tested technologies, advanced engineering, and a suite of services. Because here, excellence is everything. Our Dimensions of Excellence reflect the core values of Chemelex. Together, they inspire our decisions and guide our actions – defining excellence in our work for colleagues, customers and communities. Experts with empathy Explorer mindset Example for others Exceptional impact We are committed to equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by national, federal, state or local law. Apply Now

FABRICATION, ERECTION, TESTING & COMMISSIONING OF 02 X 500 KL HORIZONTAL (SEMI-BURRIED) TANKS FOR ATF, PRODUCT PIPELINE WORKS INCLUDING

Job Description Thermax Babcock &Wilcox Energy Solutions Limited (TBWES), a fully owned subsidiary of Thermax Limited. Over 50 yearsTBWES has emerged as a leader in steam generation and heating solutions.Offering a wide range of products for various industries, TBWES stands out inDesign, Engineering, Manufacturing, Supply Chain, Project Management, andConstruction. Our comprehensive services include customized parts, retrofits,upgrades, and digital solutions, throughout the equipment lifecycle. Our commitment toinnovative solutions, sustainability, operational excellence and customerexperience coupled with our Technology prowess and Execution capabilitiesprovides us a unique opportunity to partner with our clients in addressingtheir energy transition and climate change challenges. If you arepassionate about making a difference and enhancing your capabilities whilecontributing to the growth of TBWES and its stakeholders in these interestingtimes of Energy growth, transition, climate change and Digital. Check out ouropenings. JobTitle: Team Lead Design Engineer SBU: TBWES Services Department: Mechanical Engineering Qualification: M.E/ MTech/ B.E/ B. Tech (Mechanical) Roles And Responsibilities To understand project requirements and specifications. Mechanical Design & Detail engineering of Boilersincluding pressure parts, structure, piping, non-pressure parts, ducting,material handling equipment, etc according to client specifications andnational and international design codes. Design and preparation of General Arrangement andfoundation drawings, and detailed drawings including structure, piping andnon-pressure parts. To give inputs and specifications to vendors formaterial requirement & bought out items, and to review and approve vendordrawings and documents. To analyze technical problems and provide solutionspertaining to design, manufacturing, construction, commissioning, etc in coordinationwith manufacturing shop & outside fabrication vendors. Interaction with customer/ consultant and approvalauthorities for drawing approvals, and technical meetings Technical Support to Sales/ marketing & processteam for proposals Should be able to manage, plan, design and executionof multiple projects with pool of people. Should interact with cross functional teams tocoordinate for smooth completion of project. Should be able to develop / understand new productdesign. Critical Competencies For The Job Must be awareof fundamentals of mechanical engineering and analysis. Should beexpert in Geometry and various mathematical calculations such as Area, MI ,Section Modulus, Simply supported Beam, Velocity etc. Knowledge of concept and basics related to detailedengineering in boilers and heaters. Knowledge of types of fuel and fuel feeding system,fuel / ash handling equipment and storage systems Knowledge of design codes like IBR, ASME, EN, BS, APIetc. and their application for mechanical design calculations. Familiarity withPV Elite will be an added advantage.

Function Production Role Manager / Engineer Production Education BE/ BTech Mechanical. Additional Qualification in MBA (Marketing/General Management) is desirable Professional Experience Manager - 12 + years of experience in large scale Heavy Engineering & manufacturing industry out of which atleast 5 years in Fabrication preferably from Oil and Gas set up. Engineer - 3 to 8 years for with relevant Experience Key Deliverables Develop systems, sub-systems and for execution involving heavy fabrication of Modular structures. The manufacturing process involves the fabrication, erection, pre-commissioning and commissioning of piping systems, equipments and E&I systems Project Management - Meeting customer & contract requirements with HSE and Quality standards. Coordinate between departments such as design engineering, planning, procurement, materials etc for e Drive and implement innovative methods for optimizing productivity and cost control Prepare & Execute vendors mobilisation plans and schedules. Responsible for preparation of daily/weekly/monthly progress reports for management’s review. Responsible for ensuring world class - HSE standards at all times. Involve in Costs estimation for proposals Key relationships Internal to organization: Design & engineering, planning, procurement, External to organization: Contractors, Vendors, Client, On-site management Responsibilities Prime Responsibilities Develop strategy for execution of pre-commissioning, commissioning and start-up of the project Prepare & update checklists for project execution and as per clauses in the contract Develop and ensure safety conditions with respect to pre-commissioning, commissioning and start up activities at site Address Operations Readiness matters of the project Facilitate flawless pre-fabrication, project start-up, manage operation and maintenance as per requirements Manage and ensure that the manufacturing is performed as per project schedule & budget and in compliance with quality & safety requirements Participate in Engineering & Special studies Address and provide inputs pre-fabrication & site execution related estimates for bids and proposals Shared cross-functionally Interact with Clients Engineering / Allied disciplines for activities planning and resources mobilization Align with Client's work processes and governing guidelines for execution Manage manpower for execution Provide inputs regarding operability and maintainability during constructability studies to Engineering Coordinate with Engineering for resolution of process & engineering related issues Participate and involve in engineering studies and reviews Key competencies - Functional Need to Have Experience in managing people and leading specific projects or tasks Knowledge of latest manufacturing process, Process engineering, Planning & Scheduling Knowledge in Scaffolding Nice to Have Experience in developing documents and procedures related to Execution activities Working knowledge in SAP and other related ERPs in a manufacturing set up Excellent interpersonal& Communication skills

🏢 About Flow Tech Power Flow Tech Power is a 40-year-old, government-authorised subsidy partner, specialising in i rrigation solutions for agriculture and industrial piping systems. Based in Coimbatore, we’re expanding our outreach and digital presence — and we’re offering a creative, hands-on opportunity to join our growing team. ✅ About this role This is a beginners to intermediate position - Shout out to all young creators that want to be visual storytellers! Responsible for producing engaging content that creates awareness to be featured mainly on YouTube and a few other social media sites. Scripts and scenes will be provided — your focus will be on turning ideas into compelling visuals. This role combines two areas of work - Shooting/editing and graphic design . The job setting is focussed and not fast paced(quality over quantity), so it gives you opportunities to experiment and learn as you work. Your creative work will be widely distributed using a dedicated budget to create a social impact. Equal consideration will be given to all matching applicants without gender bias. 📍 Location: Saravanampatti, Coimbatore 💼 Type: Full-time, In-house 💵 Salary: ₹30,000 – ₹40,000 (based on experience & performance) 🔑 Key Responsibilities Storyboard, shoot, and edit short-form and long-form content for YouTube and social media Work on pre-production closely with a content writer — scripts and setups will be pre-arranged Capture agriculture, people, working of equipment, nature, testimonials and on-site footage Concentrate on post-production - editing, colour grading, voice-over, etc., Design Thumbnails and graphics that are in line with social media trends Handle audio recording and voice clarity Maintain equipment and gear with care Use AI tools to improve your creative workflow Travel to locations to shoot (all expenses covered and arranged) 📚 What We’re Looking For A strong portfolio of your video and photo work — show us your style! A degree in photography/design/visual communication OR self-taught creatives welcome Hands-on experience or interest in using: - DSLR/Mirrorless cameras - Drones, Gimbals, Tripods - Lighting and Audio Gear Familiar with software tools like: - Adobe Suite (Premiere Pro, Photoshop, Illustrator, Lightroom) - DaVinci Resolve / Final Cut Pro / Canva / Procreate Comfortable using both Windows and MacOS Follows current content trends on YouTube, Facebook, Instagram reels, etc. 💥 Why Work With Us? Above-industry average salary paid without deductions Use of high-quality equipment and software Encouragement to experiment and build your creative voice Growth potential within a stable, expanding company Work in a vibrant tech zone of Coimbatore (Saravanampatti) Travel as part of the creative process — explore and shoot 📩 How to Apply Apply here on LinkedIn for quicker response or send your resume and portfolio to 📧 info@flowtechpower.in Include any relevant links (Behance, LinkedIn, Instagram, YouTube, etc.) that show your work. 👩‍🎓 Freshers & Creators Welcome!

Title Sr. Piping Stress Engineer Job Title Sr. Piping Stress Engineer Reports To Director - Engineering JOB LOCATION: Gurgaon, India Position Summary Candidate will be responsible for Piping Design of Technology Projects in association with KBR’s Technology Business Unit at Houston Position Description Performs stress and support engineering related activities for assigned project and activity. Conversant with stress analysis of piping connected to various types of equipment like Column, tanks, exchangers, pumps/ compressors/ reactors etc. Stress analysis and supporting of Non-Metallic piping like PTFE, Glass, Glass lined etc. Conversant with requirements like trunnion calculation, flange leakage calculations, qualification of allowable nozzle loads etc. Provides resolution of technical issues related to stress and supports engineering. Prioritization and planning of engineering activities and deliverables. Conversant with special support design, Vendor interaction for springs, Expansion joints etc. Conduct stress analysis for piping systems to ensure compliance with industry standards and project specifications. Collaborate with multidisciplinary teams to provide engineering solutions and support project execution. Perform structural analysis of piping components and support structures. Review and interpret piping isometric drawings, P&IDs, and other relevant project documents. Provide technical guidance to junior engineers and collaborate with other engineering disciplines. Interface with clients to understand project requirements and deliver high-quality engineering solutions. Proficient in using industry-standard software for stress analysis (e.g., Caesar II). Strong knowledge of piping codes and standards (ASME B31.3, B31.4, B31.8, EN, BS etc.). Excellent problem-solving skills and attention to detail. Effective communication skills and the ability to work in a collaborative team environment. Minimum Requirements Relevant experience of 10-15 years in Piping stress Analysis. Graduate in B.Tech./ B.E.(Mechanical) Comfortable in travelling for work. Key Relationships Manages key business relationships with clients and with Technology Business Unit Managerial teams in India and Houston. R2102299

Entity: Production & Operations Job Family Group: Engineering Group Job Description: About Bp bp Technical Solutions India (TSI) center in Pune, strives to build on bp’s existing engineering and technical strengths to deliver high quality services to its hydrocarbons and new energy businesses worldwide. TSI brings together diverse engineering capability to provide technical services across a range of areas including engineering, maintenance, optimization, data processes, projects and subsurface, to deliver safe, affordable and lower emission energy, while continuously innovating how we work. At bp, we’re reimagining energy for people and our planet. We’re leading the way in reducing carbon emissions and developing more balanced methods for solving the energy challenge. We’re a team with multi-layered strengths of engineers, scientists, traders and business professionals determined to find answers to problems. And we know we can’t do it alone. We’re looking for people who share our passion for reinvention, to bring fresh opinions, ambition, and to challenge our thinking in our goal to achieve net zero! Let Me Tell You About The Role The Mechanical Engineer serves as the primary point of contact for technical support of their assigned Asset(s). This includes troubleshooting emerging equipment issues and designing solutions for equipment repairs. The ME will collaborate with their asset team (maintenance and operations) and other engineering disciplines to support their area’s mechanical integrity and reliability needs. What You Will Deliver Proficient in industry standards and codes (ASME and API). Design permanent and temporary repair solutions for equipment (piping, pressure vessels, heat exchangers, etc.) based on their appropriate industry standards and codes Utilizes knowledge of corrosion damage mechanisms and modes of failure in design for reliable solutions Applies reliability principles in making decisions for equipment repairs Responsible for engineering deliverables such as: Piping and pressure vessel design Equipment fitness for service assessments Field support for maintenance and operational troubleshooting Supporting personal and process safety, including management of change Support Asset maintenance to ensure accuracy in preventative maintenance planning and sparing strategies Understand Asset equipment and processes to properly monitor unit health Provide mechanical engineering and integrity input for Asset outages and Turnarounds Expectation to uphold bp’s safety culture and beliefs What You Will Need To Be Successful Must have educational qualifications: Mechanical Engineering degree and relevant knowledge and experience to refinery equipment is preferred Must have certifications: NA Minimum years of relevant experience: At least 5 years of relevant experience Total years of experience: 5 -15 Years Must Have Experiences/skills (To Be Hired With) Prior work experience functioning as a Unit Mechanical Engineer at an oil refinery (onsite) Strong understanding of refinery processes and equipment (piping, vessels, distillation columns, pumps, exchangers, furnaces, valves, etc..) Practical application of ASME B31.3, ASME Section VIII, ASME PCC-1/PCC-2, NBIC, API 570, API 571, API 510, API 579 (Level 2) Able to recommend appropriate inspection techniques for various applications (RT, UT, PT, MT, etc…) Practical knowledge of metallurgy and welding processes Management of Change SAP Good to have experiences/skills (Can be trained for – learning/on-the-job): Reliability concepts Equipment Strategies GE APM Shift support 2pm-11pm IST % travel requirements upto 10% travel Why Join our team? At bp, we support our people to learn and grow in a diverse and challenging environment. We believe that our team is strengthened by diversity. We are committed to crafting an inclusive environment in which everyone is respected and treated fairly. Diversity Statement: At bp, we provide an excellent environment and benefits such as an open and inclusive culture, a great work-life balance, tremendous learning and development opportunities to craft your career path, life and health insurance, medical care package and many others! Diversity sits at the heart of our company and as an equal opportunity employer, we stay true to our mission by ensuring that our place can be anyone's place. We do not discriminate based on race, religion, colour, national origin, gender and gender identity, sexual orientation, age, marital status, veteran status or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application and interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Travel Requirement Up to 10% travel should be expected with this role Relocation Assistance: This role is eligible for relocation within country Remote Type: This position is not available for remote working Skills: Anomaly assessment and management, Defect Elimination, Equipment criticality assessment, Equipment maintenance and inspection strategies, FAT and commissioning, Fatigue Analysis, Fitness for Service, Flanged joint, Integrity Management, Mechanical seals and support systems, Monitoring and data interpretation, Piping, hoses and tubing, Piping vibration, Pressure systems regulatory requirements, Pressure Vessels, Selection and design of pipeline equipment, Stress analysis for integrity and leakage, Valves used for isolation, Wind Turbines Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Entity: Production & Operations Job Family Group: Engineering Group Job Description: About Bp bp Technical Solutions India (TSI) center in Pune, strives to build on bp’s existing engineering and technical strengths to deliver high quality services to its hydrocarbons and new energy businesses worldwide. TSI brings together diverse engineering capability to provide technical services across a range of areas including engineering, maintenance, optimization, data processes, projects and subsurface, to deliver safe, affordable and lower emission energy, while continuously innovating how we work. At bp, we’re reimagining energy for people and our planet. We’re leading the way in reducing carbon emissions and developing more balanced methods for solving the energy challenge. We’re a team with multi-layered strengths of engineers, scientists, traders and business professionals determined to find answers to problems. And we know we can’t do it alone. We’re looking for people who share our passion for reinvention, to bring fresh opinions, ambition, and to challenge our thinking in our goal to achieve net zero! Intent This role focuses on providing mechanical engineering support for Turnaround (TAR) projects at a bp Refinery. This includes developing engineering deliverables, ensuring adherence to specifications, conducting technical evaluations, and collaborating with various stakeholders to facilitate efficient TAR execution Responsibilities Engineering Deliverables & Coordination: Receive assignments from Lead TAR Engineers and access bp refinery systems for required documentation and specifications. Interface with TAR engineers, planners, inspection teams, SMEs, operations, and asset personnel. Regularly update the TAR Engineering Deliverable Register (EDR) and communicate status with the Lead TAR Engineer. Material Specifications & Procurement: Develop Engineered Material Specifications, bid packages, and oversee specialty material selection. Ensure compliance with refinery specifications, documentation, and the Management of Change (MOC) process. Prepare bid packages and collaborate with procurement for vendor selection and budgetary estimates. Evaluate vendor bids and make technical recommendations to the local refinery team Heat Exchanger & Pressure Vessel Engineering: Develop and validate HTRI models for heat exchanger design modifications. Prepare engineering work packages for planned repairs and alterations of pressure vessels and exchangers. Perform FEL engineering for planned repairs, including modifications like machine nubbins, gasket upgrades, and nozzle additions. Conduct pressure vessel rerates and necessary calculations to support TAR work. Piping Engineering & Analysis: Identify and clarify specifications for piping, valves, gaskets, bolting, and materials. Assist TAR planners in determining equivalent pipe specifications based on P&IDs, heritage specs, and refinery standards. Perform pipe stress analysis for complex piping changes or metallurgy upgrades to assess potential impacts. Work with TAR planning and bp pipe surveying team (or equivalent) to obtain piping models for analysis. Flanged Joint Torque & Assurance: Utilize refinery-specific torque calculation tools for heat exchangers and specialty piping/equipment. Develop critical torque summaries and review with the Lead TAR Engineer or Asset Senior Mechanical Engineer. Management of Change (MOC) Participation: Support MOC processes for engineering changes, including risk reviews and evaluations. Ensure compliance while coordinating with local personnel for final implementation. Education Must have education requirements: Bachelor’s degree in mechanical engineering or equivalent discipline Experience And Job Requirements Minimum years of relevant experience: 5 years in oil and gas/petrochemical/refining/chemical or equivalent Total years of relevant experience: 5-12 Years Must Have Experiences/skills (To Be Hired With) Must have refinery engineering experience in a field support role. Good experience and understanding of engineering, maintenance and operation of pressure vessels, heat exchangers, valves, piping in refinery Proven understanding of governing codes, industry standards (API, ASME, ISO) and local laws Basic root cause / failure analysis skills. Good to have experiences/skills (Can be trained for – learning/on-the-job): Skilled in remote partnership and collaboration Accomplished in risk management in operating refineries Experience with mechanical equipment and valve selection, design, troubleshooting and repairs Experience with piping designs and supports, stress analysis using Caesar, flanged joint designs, integrity assessment and repairs Experience with brownfield modifications, equipment skid packages design, front end engineering, scoping, technical evaluation Shift support 2pm IST – 11 pm IST % travel requirements 5%; Preferred to have a valid US Visa Why Join our team? At bp, we support our people to learn and grow in a diverse and challenging environment. We believe that our team is strengthened by diversity. We are committed to crafting an inclusive environment in which everyone is respected and treated fairly. Diversity Statement: At bp, we provide an excellent environment and benefits such as an open and inclusive culture, a great work-life balance, tremendous learning and development opportunities to craft your career path, life and health insurance, medical care package and many others! Diversity sits at the heart of our company and as an equal opportunity employer, we stay true to our mission by ensuring that our place can be anyone's place. We do not discriminate based on race, religion, colour, national origin, gender and gender identity, sexual orientation, age, marital status, veteran status or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application and interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Travel Requirement Up to 10% travel should be expected with this role Relocation Assistance: This role is eligible for relocation within country Remote Type: This position is not available for remote working Skills: Anomaly assessment and management, Defect Elimination, Equipment criticality assessment, Equipment maintenance and inspection strategies, FAT and commissioning, Fatigue Analysis, Fitness for Service, Flanged joint, Integrity Management, Mechanical seals and support systems, Monitoring and data interpretation, Piping, hoses and tubing, Piping vibration, Pressure systems regulatory requirements, Pressure Vessels, Selection and design of pipeline equipment, Stress analysis for integrity and leakage, Valves used for isolation, Wind Turbines Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Title Technical Professional - Piping Stress Engineer It is the responsibility of the Piping Mechanical/Stress Engineer to: Carry out the necessary calculations to ensure that all loading conditions, which may be experienced by a piping system, are considered and catered for, within the design. Ensure that piping systems comply fully with the stress analysis requirements specified Issue approved stress isometrics for critical lines as required. Prepare stress calculations and nozzle loads summaries demonstrating Code compliance and prepare a Stress Analysis Report containing calculations and information for each piping system analyzed (when required by the Client). Confirm that the design of piping, pipe supports, and piping mechanical special piping (SP) items are in accordance with the requirements of the applicable ASME codes, industry standards and all applicable project, client and Company procedures and specifications. The Candidate shall be able to perform Pipe Stress Analysis Calculations Plant Layout Comments – loads to all other disciplines Piping Mechanical Specifications Special Studies Special Piping (SP) Item Calculations, Drawings, and Data Sheets Special Piping (SP) Item Requisition Worksheets Pipe Support Drawings Pipe Support Requisition Worksheets Pipe Support Locations Knowledge of Caesar II software to perform flexibility analysis Knowledge of Support selection and support design , spl support Drawing creation Should be well verse in Fatigue/Blast, FPSO Hog, Sag and structural consideration Knowledge of Navis Model / Review Reality is a must Knowledge of AIV/FIV is preferable Excellent skill to Guide young engineers to perform the work Knowledge in Pml macros development will be added advantage R2106579

We are looking for a skilled and detail-oriented Project Engineer to oversee and coordinate our project execution activities. The ideal candidate should have a strong mechanical background, hands-on experience in site execution, and proven project management skills. This role requires proactive coordination with cross-functional teams, ensuring adherence to technical specifications, project timelines, and client expectations. Key Responsibilities 1. Schedule and conduct pre-installation site visits to assess site readiness and identify potential issues before project execution. 2. Coordinate closely with Site Engineers to verify on-site conditions and ensure compliance with project requirements. 3. Review and validate the Bill of Quantities (BOQ) against project scope and technical drawings. 4. Plan and manage the installation schedule, ensuring efficient resource deployment and timely completion. 5. Liaise with the installation and procurement teams to ensure material availability and workforce readiness. 6. Monitor and report on project progress, risks, and deviations from plan; implement corrective actions as necessary. 7. Ensure strict compliance with safety standards, quality norms, and engineering practices. 8. Facilitate regular communication with clients, consultants, and internal teams to maintain transparency and trust. 9. Participate in regular review meetings and prepare accurate project documentation, reports, and updates. Requirements • B.E. or Diploma in Mechanical Engineering (mandatory). • Minimum 3 years of experience in project execution, preferably in turnkey interior or infrastructure projects. • Strong knowledge of mechanical systems, BOQ interpretation, and project documentation. • Excellent planning, coordination, and multitasking abilities. • Proficiency in MS Office, AutoCAD, and project scheduling tools. • Good communication and leadership skills. • Willingness to travel to project sites as needed.

Job Summary: We are seeking a skilled and detail-oriented Plumbing Engineer to design, plan, and oversee plumbing systems for construction projects, including commercial, residential, and industrial developments. The ideal candidate will ensure that all systems comply with applicable codes and standards, and will collaborate with architects, engineers, and contractors to deliver efficient, cost-effective, and sustainable solutions. Key Responsibilities: Design and develop plumbing systems (water supply, drainage, stormwater, gas piping, etc.) for new construction and renovation projects. Prepare detailed engineering drawings, schematics, and specifications using AutoCAD, Revit, or other relevant software. Perform hydraulic calculations, load estimations, and equipment sizing. Ensure compliance with local and international plumbing codes, health and safety standards, and environmental regulations. Review and approve shop drawings, submittals, and material selections. Coordinate with other disciplines (HVAC, electrical, structural, architectural) to ensure fully integrated designs. Conduct site visits to monitor construction progress and resolve plumbing-related issues. Support value engineering efforts to optimize cost and system performance. Provide technical input during procurement and assist in contractor selection. Prepare reports, technical documentation, and As-Built drawings as needed. Qualifications: Bachelor’s degree in Mechanical Engineering, Building Services Engineering, or a related field. 10+ years of experience in plumbing engineering within the construction industry. Strong knowledge of plumbing systems, materials, and installation methods. Proficient in AutoCAD, Revit MEP, and plumbing design software. Familiar with local codes (e.g., IPC, UPC) and international standards (e.g., ASHRAE, NFPA). Excellent analytical, problem-solving, and communication skills. Ability to manage multiple projects and meet deadlines. Job Type: Full-time Pay: Up to ₹60,000.00 per month Benefits: Health insurance Supplemental Pay: Performance bonus Experience: Plumbing: 5 years (Required) total work: 5 years (Required) Work Location: In person

JLL supports the Whole You, personally and professionally. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology to our clients. We are committed to hiring the best, most talented people in our industry; and we support them through professional growth, flexibility, and personalized benefits to manage life in and outside of work. Whether you’ve got deep experience in commercial real estate, skilled trades, and technology, or you’re looking to apply your relevant experience to a new industry, we empower you to shape a brighter way forward so you can thrive professionally and personally. Job description for Technical Manager Primary Responsibility Provide the management and coordination of all existing operations and activities of all the capital facility equipment/ building O & M activities include: Managing and leading the technical team for safe operation of capital equipment’s Management of Risk Assessment, Job Safety Analysis, Site level Risk Assessment, Management of Change, and all applicable work permits, Including General, Hot work, Height Work, Confined Space, Electrical, Move plan in line with EHS safe work practice Ensure preventive/routine maintenance of utilities and machinery, mechanical, Control system, LSS and electromechanical equipment Create and drive priorities and timelines for facilities job completion while working to control expenses & manage budgets Submit ad-hoc estimates of design costs including facilities equipment, installation, labor, materials, preparation, and other related expenses for budgetary purposes Provide criteria and performance specifications for facilities and equipment required to meet unique operating requirements and building and safety codes Conduct incident investigations and documents outcomes Observe and promote all regulatory requirements as defined per applicable regulations, rules and procedures established by the Company and notifies any violation or deviation to the immediate supervisor or appropriate authority Operation & maintenance of electrical Systems, nitrogen and other gas yards, chilled Water, RO water, HVAC, process exhaust, LT systems gases, sprinklers, installed at site Responsible for root cause and corrective action (“RCCA”) for any safety issues, change management, inventory management, budget forecast and fifty-two (52) week planned preventive maintenance (“PPM”) calendar. Responsible for new tool installation support. Complies with all training and Safety requirements to perform duties of the job Track AMC and vendor management for utilities Leads the team to meet the key performance metrics (KPIs) and thrives to continuously improve the performance on KPIs Conduct monthly performance review meeting with stakeholders / Management team Monitor and conduct performance reviews for empaneled contractors Preventive Maintenance Preventive maintenance involves regular, scheduled activities aimed at preventing system failures and ensuring the all the equipment operates efficiently. The scope includes: Scheduled inspections and maintenance: regular inspections and maintenance of all the equipment’s and associated parts. System Testing: routine testing of system functionalities to ensure all components are working correctly. Calibration: calibration of all the meters and gauges. Cleaning: cleaning of hardware components to prevent dust accumulation and overheating. Battery Checks: inspection and replacement of backup batteries as needed. Documentation: Maintenance of detailed records of all preventive maintenance activities. Reporting and Documentation All O & M activities, both preventive and corrective, will be documented in detailed reports. These reports will include: Maintain the updated documents of single line diagram (“SLD”), piping and instrumentation diagram (“P&ID”), As-built drawings and meter reading logs etc. Activity logs: records of all maintenance activities performed, including dates, times, and personnel involved. Issue reports: detailed descriptions of any issues encountered, actions taken, and outcomes. Recommendations: suggestions for improvements or upgrades to enhance system performance and reliability. Maintenance reports. Monthly reports. Daily reports and equipment log. QBR - Quarterly business review power point presentation. All above mentioned documents shall be provided to the JLL represented in charge. Performance valuation The Provider's performance will be evaluated based on the following metrics: System uptime and reliability. Response and resolution times during breakdowns and shutdowns. Quality and timeliness of documentation and reporting. Customer satisfaction and feedback. Mandatory skills required for performing the job: Experience in managing and leading Safety and Utility maintenance for entire site/Company Proven safety track record with experience in developing and implementing safety programs Knowledge of various Engineering controls, Machine Safety, Material Handling Safety Knowledge in Lock out and Tag out procedure’s knowledge, Electrical Safe work practice, Hazardous gas management Work at height Define and monitor metrics in line with AOP (annual operating plan) objectives Identify, streamline, and implements improvement in maintenance process as appropriate Desirable skills required for performing the job: Represent JLL while handling necessary permit approval queries from government authorities Knowledge of Risk Assessment Processes, Various techniques of ergonomics assessments Knowledge of Chemicals and its safety data sheets Knowledge of implementation of Behavioral Based Safety programs to build the safety culture and develop good safety climate in the organization Exceptional interpersonal relationship skills and professional level of emotional intelligence necessary to achieve the desired objective deliverables Skill in decision making and problem solving in the absence of complete or accurate data Stakeholder management, within various global organizations of the company Exhibit attention to detail, sense of urgency and ability to handle multiple tasks in fast paced environment External vendor management Eligibility Criteria: Years of Experience: 8 to 12 years of experience At least 8 years of working experience in Facilities & Lab Utility Equipment maintenance and site safety process knowledge with a strong network and proven relationships Educational qualification: Preferably BE / B Tech/M tech degree in Electrical/Mechanical Engineering If this job description resonates with you, we encourage you to apply even if you don’t meet all of the requirements below. We’re interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. About JLL – We’re JLL—a leading professional services and investment management firm specializing in real estate. We have operations in over 80 countries and a workforce of over 102,000 individuals around the world who help real estate owners, occupiers and investors achieve their business ambitions. As a global Fortune 500 company, we also have an inherent responsibility to drive sustainability and corporate social responsibility. That’s why we’re committed to our purpose to shape the future of real estate for a better world. We’re using the most advanced technology to create rewarding opportunities, amazing spaces and sustainable real estate solutions for our clients, our people, and our communities. Our core values of teamwork, ethics and excellence are also fundamental to everything we do and we’re honored to be recognized with awards for our success by organizations both globally and locally. Creating a diverse and inclusive culture where we all feel welcomed, valued and empowered to achieve our full potential is important to who we are today and where we’re headed in the future. And we know that unique backgrounds, experiences and perspectives help us think bigger, spark innovation and succeed together.

He should have design experience of industrial projects Well versed with design tools like Auto-cad, Inventor He should be proficient in 3d modeling He should be proficient in General arrangement and detailed development drawings He should be proficient in estimating and preparing bill of materials Exposure to industrial equipment and material handling equipment like blowers, conveyors, bucket elevators, compressors, pumps etc. Exposure to site and building layout plans Exposure to piping and pipe routing development drawings Exposure to developing PID drawing as required Exposure to live projects Exposure in project co-ordination and implementation Exposure to structural and steel metal detailing Job Type: Full-time Pay: ₹20,000.00 - ₹40,000.00 per month Benefits: Health insurance Schedule: Day shift Ability to commute/relocate: Khairatabad, Hyderabad, Telangana: Reliably commute or planning to relocate before starting work (Required) Education: Bachelor's (Preferred) Experience: total work: 2 years (Preferred) Work Location: In person

Job Description Key Responsibilities: Teach and mentor students across the following modules: Oil & Gas fundamentals , including exploration, drilling, refining, and plant operations NES Fircroft+10Entri+10Trabajo+10ExpertiaIndeed Mechanical QA/QC , covering inspection techniques, documentation standards (ITPs, NCRs, QCPs), welding (WPS/WPQR), piping/pipeline engineering, and NDT methods (UT, RT, PT, MT) Shine+4Entri+4Airswift+4 Fire & Safety , including hazard identification, risk assessment, safety audits, compliance with regulatory standards, emergency preparedness, and incident investigation Develop, update, and deliver engaging curricula, lesson plans, case studies, slide decks, practical demonstrations, and courseware suiting classroom and virtual environments Conduct theoretical sessions and supervise hands-on practical labs and field-based training (e.g., plant-site visits, equipment inspections, live fire drills) Evaluate trainees through assignments, presentations, exams, and provide constructive feedback to improve learning outcomes Keep training content current by incorporating the latest industry standards (ASME, API, ISO, NFPA) and emerging technologies and practices Build and maintain strong rapport with students, providing guidance and career counseling tailored to industrial requirements Collaborate with other faculty for cross-functional projects, curriculum development, and maintaining institutional accreditation Required Qualifications & Experience: Bachelor’s degree in Mechanical / Safety / Fire Engineering (B.Tech/B.E. preferred) Teaching/Training : Minimum 2+ years in technical instruction (classroom, virtual, vocational) Industry (Oil & Gas / Mechanical / QA/QC / Fire Safety) : Minimum 1–4 years practical experience Certifications (must-have if available): For QA/QC: CSWIP 3.1, AWS-CWI, ASNT Level II in RT/UT/PT/MT, API/ASME Strong verbal and written communication, presentation, and interpersonal skills Commit to weekend or field training as needed Job Type: Full-time Pay: From ₹17,000.00 per month Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person

Position : Senior Piping Engineer - AutoCAD Plant 3D Experience : 8-15 Years Qualification : BE/B.Tech - (Mechanical/Production/Chemical) No. Of Positions : Multiple Job Location : Pune/Bangalore Required Skills & Experience: Should have minimum relevant experience of 8+ Years of experience as Piping Engineer. Should have experience in Chemicals/Petrochemicals/Biofuels industry or SKID based projects. Should have experience in piping engineering. Familiarity with Piping Codes & Standards. Should willing to work in Bangalore/Pune. Hands on Experience on Autocad Plant 3D is a must. Should have experience in 3D modelling of pipes, equipment, structure, cable trays, etc. Work Experience on international projects will be an added advantage. Responsibilities: Preparation & checking of Equipment Layout. Development & checking of piping layout. Preparation & checking of isometric drawings with bill of material. Preparation & checking of nozzle orientation. Extraction of Structural drawings. Preparation of valve and line list from P&IDs. Preparation of pipe supports General Arrangement Drawings. Vendor drawing reviews. Active participation in model reviews. Understanding of inter-disciplinary interfaces. Co-ordination and communication within Piping team. Please visit our company website for more details. www.Neilsoft.com

Job Summary: We are looking for a skilled and detail-oriented HVAC Designer to develop and prepare complete HVAC system designs for residential, commercial, and industrial projects. The candidate should have a deep understanding of HVAC principles, heat load calculations, duct and piping design, and relevant building codes. The HVAC Designer will work closely with project teams, clients, and consultants to ensure that system designs are efficient, compliant, and cost-effective. Key Responsibilities: Conduct site surveys and understand project requirements for HVAC system design. Perform heat load calculations using software tools like HAP or Manual J. Design ducting layouts , chilled water piping , refrigerant piping , and ventilation systems . Select HVAC equipment (chillers, AHUs, FCUs, VRV/VRF systems, exhaust fans, etc.) based on technical specifications and project needs. Prepare detailed HVAC design drawings using AutoCAD, Revit, or similar software. Coordinate with electrical, plumbing, and fire-fighting design teams to avoid service clashes. Ensure designs comply with ISHRAE, ASHRAE, NBC, and other applicable codes/standards. Generate BOQ (Bill of Quantities) , material take-offs, and assist in tender documentation. Provide technical support to the site execution team during installation and commissioning stages. Revise and update drawings as per site conditions or client instructions. Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹30,000.00 per month Schedule: Day shift Evening shift Morning shift Work Location: In person

Mechanical piping and engineer in autocad experience draftman job description Here's a detailed Job Description for a Mechanical Piping and AutoCAD Draftsman (with Engineering Experience) role. You can customize this as per specific requirements: Job Title: Mechanical Piping & AutoCAD Draftsman (Engineering Background) Location: Greater noida Department: Engineering / Design Experience: 2–5 Years (Preferred) Employment Type: Full-time Job Summary: We are seeking a skilled and detail-oriented Mechanical Piping & AutoCAD Draftsman with an engineering background to support piping layout, mechanical drafting, and 2D/3D modeling. The ideal candidate will have experience in preparing technical drawings for piping systems in industrial, commercial, or infrastructure projects using AutoCAD and other relevant design software. Key Responsibilities: Prepare detailed piping and mechanical drawings, layouts, and schematics using AutoCAD and relevant design tools. Work closely with engineers to understand and translate conceptual designs into accurate technical drawings. Develop P&IDs, piping isometrics, general arrangement (GA) drawings, and fabrication drawings. Interpret mechanical and piping specifications, project scope, and standards to ensure compliance in design. Assist in BOM (Bill of Materials) creation and revision based on design changes. Coordinate with project teams to review designs, check for interferences, and implement revisions. Maintain drawing records and ensure document control standards are followed Diploma or Degree in Mechanical Engineering or a related field. Minimum 1 to 2 or above years of experience as a Draftsman in piping or mechanical design. Proficient in AutoCAD Good understanding of piping systems, valves, fittings, pumps, supports, and equipment layouts. Ability to read and interpret engineering drawings and technical documents. Attention to detail, accuracy, and quality in drawing and documentation work. Site or construction coordination experience is an added advantage. Experience in industrial Mechanical piping oil & gas, HVAC, water treatment, or process industries contact =8869091408 Job Type: Full-time Pay: ₹10,000.00 - ₹25,000.00 per month Benefits: Health insurance Work Location: In person

Auxiliary System Engineer LNT/ASE/1412958 LTPO-L&T Energy-CarbonLite SolutionsHazira Mfg Complex Posted On 11 Jul 2025 End Date 07 Jan 2026 Required Experience 7 - 12 Years Skills Knowledge & Posting Location DETAIL DESIGN SAP AUTOCAD Minimum Qualification BACHELOR OF ENGINEERING (BE) Job Description Seeking a Mechanical Engineer with 7-12 years of experience to support the design and detailing of generator auxiliary systems such as Seal oil system, Stator Water Cooling Water System, Gas Dryer System, Gas System, Hydrogen Purity System. The role includes preparing P&IDs, Equipment sizing, Specifications, offer evaluations, GA drawings, equipment layouts, and coordinating with cross-functional teams. Key Responsibilities: Conduct basic calculations for equipment sizing and pressure drops. Preparing Vendor specification for generator auxiliary equipments, valves, instruments etc. Prepare P&IDs, System Description and BOMs Coordinate with vendors for technical specifications and for offer evaluations. Support 3D modeling and system integration. site coordination during erection and commissioning providing timely resolution to the site issues. Requirements: B.E./B.Tech in Mechanical Engineering. 7-12 years of relevant experience in generator or rotating equipment auxiliaries. Proficient in AutoCAD and piping software's is an added advantage Knowledge of ASME/API standards and basic fluid systems.

Job Description Position: Welding Engineer Location: Silvassa /Project Site Department: Engineering / Maintenance Job Summary: We are seeking an experienced Welding Engineer to support our dairy automation projects. The ideal candidate will be responsible for developing and optimizing welding processes, ensuring the quality of stainless steel welding used in dairy equipment, and maintaining compliance with food-grade industry standards. This role requires expertise in sanitary welding, stainless steel fabrication, and process piping to support the production of high-quality dairy processing systems. Key Responsibilities: Develop, implement, and optimize welding procedures for stainless steel fabrication used in dairy processing equipment. Ensure all welding work complies with food-grade industry standards such as 3A Dairy Standards, ASME BPE, and AWS D18.1 for sanitary welding . Select appropriate welding techniques (TIG, MIG, orbital welding, etc.) and materials for dairy industry applications. Conduct welding inspections and ensure adherence to strict hygiene and quality control standards. Collaborate with design, production, and automation teams to improve welding processes for dairy machinery and piping systems. Train and guide welders in sanitary welding best practices, emphasizing smooth welds to prevent contamination. Monitor welding performance and address any defects or non-compliance issues through corrective actions. Maintain detailed records of welding procedures, material certifications, and inspection reports. Ensure compliance with GMP (Good Manufacturing Practices), HACCP, and other food safety regulations related to welded components. Required Qualifications: Bachelor’s degree in Welding Engineering, Mechanical Engineering, Metallurgy, or a related field . 4-5Years of experience in welding engineering, preferably in the dairy, food, or pharmaceutical industry . Strong expertise in welding stainless steel (SS304 & SS316L) and sanitary piping systems. Knowledge of TIG welding, orbital welding, and non-destructive testing (NDT) methods . Familiarity with sanitary design principles and food safety requirements . Ability to interpret welding codes and standards such as ASME BPE, AWS D18.1, and 3A Sanitary Standards . Strong problem-solving skills and ability to work in a fast-paced production environment. Experience with welding automation and robotic welding is a plus. Preferred Qualifications: Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) . Experience in dairy plant equipment fabrication (e.g., milk tanks, pasteurizers, piping, and CIP systems). Knowledge of corrosion resistance, heat treatment, and material selection for dairy applications . If you have the required expertise and want to be part of a team shaping the future of dairy automation, we encourage you to apply! Job Type: Full-time Pay: ₹300,000.00 - ₹600,000.00 per year Benefits: Health insurance Paid time off Provident Fund Schedule: Day shift Rotational shift Supplemental Pay: Yearly bonus Ability to commute/relocate: Vapi, Gujarat: Reliably commute or planning to relocate before starting work (Required) Education: Bachelor's (Required) Experience: 6years: 3 years (Required) Work Location: In person Application Deadline: 15/07/2025 Expected Start Date: 15/07/2025

Piping Engineer LNT/PE/1412941 LTPO-L&T Energy-CarbonLite SolutionsHazira Mfg Complex Posted On 11 Jul 2025 End Date 25 Jul 2025 Required Experience 3 - 4 Years Skills Knowledge & Posting Location PROCESS PIPING DESIGN AUTOCAD PDMS DESIGN Minimum Qualification DIPLOMA IN MECHANICAL ENGINEERING (DME) Job Description We are looking for a skilled Piping Engineer with 3 to 4 years of relevant experience in piping design and engineering for industrial, oil & gas, or infrastructure projects. The ideal candidate should be proficient in using OpenPlant , AutoPIPE , and AutoCAD , with a strong understanding of piping layouts, stress analysis, and isometric drawing preparation. Prepare piping layouts, isometric drawings, and material take-offs using AutoCAD and OpenPlant . Perform pipe stress analysis using AutoPIPE and ensure compliance with relevant codes and standards. Coordinate with other disciplines such as civil, structural, and mechanical teams to resolve design/interface issues. Review P&IDs and ensure accurate translation into piping layouts and isometrics. Assist in site surveys, field measurements, and prepare as-built drawings when required. Ensure timely delivery of design deliverables as per project schedules. Support the senior engineers in design reviews and quality checks. Proficiency in OpenPlant , AutoPIPE , and AutoCAD . Good knowledge of piping codes and standards (ASME, ANSI, etc.). Ability to read and interpret P&IDs and piping specifications. Basic understanding of stress analysis and pipe supports. Strong communication and teamwork skills. Good attention to detail and problem-solving abilities.

Location: Oman—Shut Down Designation: Mechanical Foreman Key Responsibilities: Team Lead & Supervision: Supervise and lead a team of mechanics, technicians, and laborers in daily mechanical activities. Assign tasks and monitor progress. Installation & Commissioning: Oversee installation, alignment, and commissioning of mechanical equipment (pumps, compressors, piping, valves, etc.) as per engineering drawings and standards. Preventive & Corrective Maintenance: Plan, execute, and supervise both preventive and corrective maintenance of all mechanical systems and equipment. Safety Compliance: Ensure all jobs are carried out following HSE (Health, Safety, and Environment) guidelines. Conduct toolbox talks, hazard assessments, and ensure use of PPE. Quality Control: Inspect work performed to ensure compliance with specifications, codes, and standards. Report defective materials or questionable conditions. Progress Reporting: Prepare daily/weekly reports, maintain documentation, and provide feedback to supervisors and clients on project status and issues. Material & Resource Management: Manage inventory of mechanical materials, coordinate requisitions, and ensure optimal use of resources Job Type: Full-time Pay: ₹60,000.00 - ₹70,000.00 per month Work Location: In person

Location: Oman-Shutdown Designation: Mechanical Fitter Key Responsibilities: Installation & Assembly: Fit and assemble mechanical parts, components, and machinery (e.g., pumps, compressors, valves, pipelines, pressure vessels). Read and interpret engineering drawings, plans, and specifications. Perform layout work, marking, and precise measurements. Maintenance & Repairs: Identify faults and carry out corrective and preventive maintenance on rotating and static equipment. Disassemble, inspect, repair, and reassemble machinery and mechanical systems. Replace defective parts, bearings, and gaskets as required. Piping & Valve Work: Cut, bend, and fit pipes, flanges, and valves according to project plans. Pressure-test pipelines and joints for leaks. Safety & Compliance: Work according to company and regulatory health, safety, and environment (HSE) standards. Complete relevant documentation (job cards, permits, inspection reports). Use PPE and safety tools at all times; participate in safety briefings. Coordination & Communication: Coordinate closely with supervisors, engineers, and other trades on site. Report work progress and issues clearly and promptly. Tool & Equipment Handling: Use hand and power tools, welding machines, grinders, and lifting equipment safely and efficiently. Maintain and check tools and lifting tackles in good condition. Job Type: Full-time Pay: ₹35,000.00 - ₹40,000.00 per month Schedule: Day shift Work Location: In person

Position Summary Fives Combustion System India. is actively seeking a Engineer – Engineering to join its teams in Vadodara, Gujarat. At Fives, we are all driven by a common calling, to prove that industry can do it! We work together daily to make industry an answer to all of the major technological, environmental, social and economic challenges of our time. How do we do that? For over 200 years, we’ve invented and designed the solutions and technologies that substantially and sustainably improve everyone’s daily life. Fives Combustion System (FCS), Baroda is part of Fives Pillard (Fives Group) engaged in Designing, Engineering, Manufacturing and commissioning of various types of Burner equipment and combustion Systems, involving almost all types of fuels. FCS equipment provide optimum performance meeting all the needs in the field of Co- generation and Combined Cycle Plants, Incineration, Pyro-processing, Utility and Industrial Boilers, refinery and Petrochemicals Industries, Fertiliser and Agrochemical Industries as well as other Process Industries. FCS have also established a manufacturing Facility at Padra - Jambusar Highway, Dabhasa, Baroda It is with you, that industry can do it! We are currently seeking a Sr. Engineer – Engineering, who has the same desire to prove that “industry can do it!” At Fives we all have a part to play in achieving our common purpose. Your role will be to: Responsibilities: Translate product level requirements into subsystem/item/component design criteria. Lead & Own engineering release of subsystem design including component, part CAD Drawings, and BOMs through transmittal Develop and execute Validation & verification of Subsystem/Module/Components on schedule at required cost, quality and performance levels Perform Engineering /Design calculations (mechanical) Develop and capture knowledge required to deliver subsystem level excellence through Design Creating 3D model/Reviewing the CAD drawing Manage design trade-offs between cost, aesthetics, performance, and other design attributes. Align current capability of architecture/supplier/manufacturing/customer solutions to meet product attribute targets and identify solutions for projects where current capability does not align to targets. Co-ordinate to client/customer to transform their requirement in to drawing/document Participate in and lead Technical Design Previews as needed Communicate with interface department Material selection & performing project planning, capital calendar & management. Knowledge on System Engineering with Good analytical skills Hands on experience 3D modelling and system layout, piping Release Product / Component designs & drawings as per project targets. Make sure correct location of Design Validation & Verification Reports Other Essential Functions: Hands on experience – SOLID works, AUTO CAD Knowledge of ASME design and material code Proficient in Strength of material and design Convergent with customer’s specification Preparation of documents data sheet for mechanical Buy out. Managing operations Working collaboratively with design engineers, operation engineers, purchasers and other internal staff Project management within cost and time constrained environments understanding and ensuring compliance with relevant health and safety regulations and quality standards providing advice and consultancy support Purchasing equipment SKILLS & EXPERIENCE Minimum of 2 years’ experience in 3D modeling, CAD and layout preparation Experience in managing Mechanical engineering deliverable Familiarity with process controls and strategy as per ISO Ability to work well with others and lead by example Proficient in Word, Excel, and Adobe Acrobat Good communication skills with clients and employees At Fives Combustion System, and under the direction of the Dy. General Manager – Engineering who is reporting authority, you will join the Engineering team. Since we are located in Vadodara City, it will be easy for you to reach us by any transportation. If this is you, come join us, too! We are seeking someone who has a BE/B.Tech – Mechanical Engineering / Diploma – Mech with recognized institute/university with 2 years of experience in the field of Engineering or Process Equipment as an Engineer. If you are a self-starter, committed, confident then we are eager to change the world with you! Why come to Fives? By becoming part of Fives, you will be joining an international group that will provide you access to numerous opportunities for growth and mobility, in a wide number of fields. We will give you room to learn, grow and develop, both professionally and personally, thanks to our onboarding and support programs. Indeed, you will be able to benefit from a hybrid work mode, and enjoy a number of other benefits also, for that you must contact. Industry can do it with you!

Location: Gujarat (Multiple Industrial Sites) Office Location (when not on Site) : Vadodara Department: Projects & Services Reports To: Director Experience : 7-15 Years (preferably in Industrial Automation, Lubrication Systems, Maintenance Services) Employment Type: Full-Time, On-Site (As and When Project) Job Overview: The Operations/Execution Head will be responsible for overseeing the end-to-end execution of industrial lubrication system installation, configuration, and commissioning at client sites. This role includes project planning, team management, coordination with clients and internal stakeholders, ensuring quality and safety compliance, and delivering successful project outcomes within defined timelines and budgets. Key Responsibilities: 1. Project Execution & Management · Lead and manage all field operations related to installation, configuration, and commissioning of automatic lubrication systems. · Prepare and execute detailed project execution plans with timelines, resource allocation, and milestone tracking. · Ensure timely and successful execution of projects across various client locations. 2. Technical Oversight · Review system layouts, piping diagrams, and installation requirements. · Supervise mechanical and electrical fitment, wiring, sensor alignment, and system calibration. · Troubleshoot issues during installation and commissioning phases. 3. Team Leadership & Vendor Coordination · Manage and guide installation and service teams, including technicians and subcontractors. · Monitor field crew performance, provide training, and ensure adherence to safety and work quality. · Coordinate with vendors for materials, tools, and equipment required at sites. 4. Client Interface · Act as the primary point of contact for clients during the execution phase. · Ensure project specifications are understood and met as per the agreed scope. · Conduct client briefings, site inspections, and final handovers. 5. Documentation & Reporting · Maintain all project documentation including checklists, installation reports, commissioning certificates, and client sign-offs. · Report progress, challenges, and escalations to senior management on a regular basis. 6. Compliance & Safety · Ensure compliance with all statutory regulations, client site protocols, and safety standards. · Conduct tool box talks, risk assessments, and enforce PPE usage. Key Skills & Competencies: · Strong project execution skills with ability to handle multi-site projects. · Knowledge of lubrication systems (single-point/centralized), mechanical installations, industrial automation. · Understanding of electrical wiring and PLC configuration (preferred). · Excellent communication, problem-solving, and people management skills. · Strong focus on safety, quality, and client satisfaction. Job Type: Full-time Pay: ₹20,000.00 - ₹35,000.00 per month Benefits: Cell phone reimbursement Flexible schedule Paid sick time Paid time off Schedule: Day shift Supplemental Pay: Yearly bonus Application Question(s): Do you have Similar Experience of managing Execution of Orders at various Site through Technicians ? What if technician is not able to understand Installation of Product and Configuration of Product , how will you solve it? Imagine you went at Site and Customer said to Complete 20 Points Installation though on average in a day, 8 points are only install, how will you address this requirement of Customer? Why should we hire you and why are you fit for this role? Work Location: In person Application Deadline: 20/07/2025