Experience in performing stress analysis using Caesar-II is essential. Exposure to Process Hazard / Risk Analysis, HAZOP / HAZID studies and preparing close-outs is advantageous. Familiarisation in preparation of shop drawings for fabrication for piping, pipe support is advantageous. Responsibilities includes preparation of Piping Material Take offs, design calculations, bill of material, datasheets for piping specialty items, specifications, request for quotations, conducting vendor drawing reviews and vendor design evaluation, review of layout, piping GADs, ISOs, Pipe Support drawings etc. Good working knowledge in relevant ASME, API, ANSI, DIN, BS, IS, OISD codes and standards is must. Hands-on working in Caesar – II, PDMS, PDS software’s is essential.

Hi, We have one urgent position as Piping Engineer to lead end-to-end piping activities, from fabrication to onboard erection, ensuring on-time delivery, zero defects, and strict compliance with quality and safety standards. The ideal candidate will drive efficiency in the fabrication shop while ensuring seamless installation onboard vessels. Designation: Piping Engineer Qualification: Bachelor’s in Mechanical/Fire Engineering or related field. Experience: Minimum 5+ years in shipbuilding/ oil & gas, with onsite erection exposure. Location: Chennai Responsibilities and Duties: (a) Project Planning & Execution (b) Fabrication Supervision: (c) Onboard Piping Erection (d) Quality & Safety Compliance: (e) Team & Stakeholder Coordination: Lead fabrication fitters, welders, riggers, and erection crews. Report daily progress, risks, and delays to project management. (f) Documentation & Handover: If you are interested, please contact elanpsservices@gmail.com or refer someone Job Type: Full-time Pay: ₹400,000.74 - ₹800,000.10 per year Schedule: Day shift Experience: Piping Engineer: 3 years (Required) Work Location: In person

Hi, We have one urgent position as Experienced Project Supervisor to oversee the fabrication and erection of fire pipeline systems for industrial and commercial projects. Designation: Project Supervisor Location: Chennai Experience: 5–8 years of relevant experience in fire protection piping works within industrial and commercial construction projects. Qualification: Diploma or Bachelor Degree in Mechanical JD: Managing site activities to ensure all fire protection systems are installed as per approved Designs, safety codes, and project timelines. The supervisor will be responsible for execution in both industrial environments (e.g., factories, plants, warehouses) and commercial buildings (e.g., malls, office complexes, high-rises). If you are interested, please contact @ elanpsservices@gmail.com Job Type: Full-time Pay: ₹36,000.00 - ₹55,000.00 per month Schedule: Day shift Ability to Commute: Dulles, VA 20189 (Required) Ability to Relocate: Dulles, VA 20189: Relocate before starting work (Required) Work Location: In person

Hiring for the position of Design - Quality Supervisor/ Senior designer Qualification: Diploma in Mechanical Engineering with 5 years experience Requirements: Proficiency in AutoCAD, managing a small team of draftsmen with knowledge in plan and equipment. Site experience is a must to ensure site measurements are taken in time to develop engineering drawing. Responsibilities: He shall be responsible for quality of drawings, coordination with IOCL on day to day basis, engage in technical discussion, managing the team, maintain records and become focal point. Skills: AutoCAD, MS office – Word and Excel Salary : As per norms, PF, gratuity, and bonus. Work location : Vadodara Job Type: Full-time Pay: ₹20,000.00 - ₹25,000.00 per month Benefits: Health insurance Paid sick time Paid time off Provident Fund Schedule: Day shift Work Location: In person

Collaborate with the sales team to understand the client's needs and requirements forelectrical engineering projects. Design solution as per client requirement (Electrical Panels and Automation System) Proficiently derive load lists from Single Line Diagrams (SLDs) Expertly derive Instrumentation and Control (I/O) lists from Piping and InstrumentationDiagrams (P&IDs), ensuring accuracy and detail to inform the creation ofcomprehensive project proposals. Understanding of technical specification Methodically prepare intricate calculations, system architectures, and techno-commercial proposals. Generate precise Bill of Quantities (BOQ) for electrical panels, showcasing attention todetail and technical expertise. Engage with clients to clarify technical aspects of the proposal and address anyconcerns or questions they may have Job Type: Full-time Pay: ₹15,000.00 - ₹30,000.00 per month Schedule: Day shift Supplemental Pay: Yearly bonus Education: Diploma (Preferred) Work Location: In person

Prepare 2D and 3D mechanical drawings using AutoCAD, SolidWorks. Develop drawings for mechanical components, assemblies, sheet metal, piping layouts, and fabrication. Create GA (General Arrangement) drawings and detailed part drawings. Prepare and update Bill of Materials (BOM) for projects. Coordinate with manufacturing teams to ensure drawings are practical and manufacturable. Follow industry standards, safety norms, and quality procedures while drafting. Basic understanding of materials, fabrication techniques, and mechanical design principles. Familiarity with MS Office (Excel, Word). Good communication skills and the ability to work as part of a team. Occasional site or plant visits if required. Job Types: Full-time, Permanent, Fresher Pay: ₹10,000.00 - ₹20,000.00 per month Schedule: Day shift Work Location: In person Application Deadline: 30/06/2025

Years of Experience: 2-3 years in Production Fitter Location: Manglej, Por Karjan highway side Vadodara Industry /Mfg. type - piping spool & Pressure Vessels, Heat Exchangers and other process equipment’s Facilities : Salary + PF + ESIC + Canteen+ OT Preferred : Fabrication and Production Fitter only. Job Type: Full-time Pay: Up to ₹20,000.00 per month Benefits: Provident Fund Schedule: Day shift Work Location: In person

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world’s most complex challenges and deliver more impact together. Role Description This role is part of Arcadis’ Global Excellence Centre (GEC) and will join our 3,000+ talented individuals working in India, Romania, and Philippines, in partnership with Arcadis’ offices globally. The GEC brings key capabilities and capacity to support our clients seamlessly around the world. For those in GEC there are options to be dedicated to one country; developing deep knowledge and strong relationships, as well as opportunities to be part of teams working truly globally as a centre of excellence, offering diversity and variety. Arcadians are by nature, globally minded and culturally aware, and Arcadis strongly believes in flexibility which enables change over time as your career progresses. The GEC model is well embedded in Arcadis, and the strong relationships that exist between our global offices are truly unique. Role Accountabilities: As a Mechanical Engineer in our Global Excellence Centres (GEC), you will play a major role and will be part of Rail System Group under Rail which is one of Global Business Areas (GBA). You will be reporting to Principal Engineer and Senior Engineer. You will also collaborate with the lead regions and stakeholders on a regular basis. You will manage the delivery of the projects to meet time, quality, budgetary and health and safety targets Proficient in the following mechanical engineering design fundamentals: heating, ventilation, air conditioning, Tunnel Ventilation Systems (TVS), LTHW & Chill water systems, compressed air system, gas piping, daylighting analysis, building envelop design, over-heating risk assessment, Part-L compliance. Working Knowledge in AUTOCAD, REVIT or AECOsim and NAVISWORKS. Proficient in using the following engineering software: IES-VE, HEAVACOM (pipe/duct pressure drop calculation), HAP, SKETCHUP & Bluebeam. Liaise with other disciplines within the MEP Project Team, other discipline like architects and civil team for coordination MEP works and ensure all requirements are understood. Nice to Have: Knowledgeable in using CIBSE pipe/duct sizer. Apply technical engineering techniques and methods using international design standards such as UK, European and Middle East Mechanical Design Codes. Qualifications & Experience: 10+ Years of Experience in Mechanical Discipline (TVS & HVAC) Graduate of Bachelor of Science/Engineering in Mechanical Discipline from recognized University. Belong to the top 20% of the engineering class. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It’s why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You’ll do meaningful work, and no matter what role, you’ll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why equality and inclusion is at the forefront of all our activities. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity employer; women, minorities, and people with disabilities are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, caste, creed, colour, religion, sex, age, disability, marital status, sexual orientation, and gender identity. #JoinArcadis #CreateALegacy #Hybrid #LI-MS4

Install and repairs plumbing/piping/tubingEnsure the smooth operation of heating and refrigeration systemsPerforms mechanical and basic electrical maintenance, troubleshooting and repairs relating to all experimental / production / building equipment and ground utilitiesOperation of water treatment systemsPerform routine operations and maintenance, water chemistry following technical manuals and schematics without direct supervisionMust be able to aid the mechanic in trouble shooting and repair for most types of equipment listed above by describing operating conditions and parameters associated with failureMust have knowledge of systems and how one system affects anotherMust perform advanced casualty control procedures to minimize damage to equipment and personnelMust perform accurate record keeping for operations and repair work orders for all planned and repair maintenancePosition requires the ability to work 12hr rotating shifts Job Type: Full-time Pay: ₹25,000.00 - ₹50,000.00 per month Benefits: Provident Fund Schedule: Rotational shift Supplemental Pay: Joining bonus Performance bonus Work Location: In person

Should have exp.into Project sales , business development , Specification. Candidate should have exp.into Building material product. Min 4+ Years exp. into local market. Required Candidate profile Hiring for Female candidate only Hiring for top USA MNC company Dealing into Faucet , Tapes , bath fitting products.

Sr. Engineer/ Manager/ Sr. Manager mechanical (piping), design activities including HFDs, piping specs, AUTOPLANT DB, and component requisitions. Review layouts, coordinate across teams and manage engineer outputs. Water industry experience is a plus

Our solutions are a key part of most industries - electronics, medical research, renewable energy, food production, infrastructure and many more. Working with us means working with the latest technologies and groundbreaking, sustainable innovations. Join us on our journey for a better tomorrow. Your Role Job Description/Mission Your primary role is to be a vital member of the team and a main point of contact for customer projects. Your mission is to contribute to product management activities from an engineering perspective, while also enhancing the technical proficiency of the GECIA team with a solution-oriented mindset. To accomplish this, you will need to continually improve your own skillset and familiarize yourself with the latest technology platforms. Additionally, you will be responsible for ensuring on-time delivery and a first-time right approach in all your work. Key Responsibilities Customer Focus Study & Analyse Technical Specifications for Scope, Technical requirements and work content based on the inputs received. Generate 3D layouts, detail engineering and drawings for new deigns, Customised/ES Piston products and Skid Packages. Monitor performance parameter like Timely completion, Quality of drawings and First time right. Generating necessary documents for task as per SOP’s and Quality Systems. Also following design codes, work instructions and checklists. Communicate progress and deliverable updates to the stakeholders, raise red flags and highlight any concerns to all stakeholders. Understanding priorities, job planning, training designers to execute the jobs with high quality within specified timelines defined by customers. Maximize satisfaction level of customers in terms of quality of work, meeting deadlines and quick turnaround time. Ensure proper co-ordination with other competences involved CAE, Electrical design etc. Maintain high quality level by organizing reviews of own work and participating in reviews from other designers. To resolve any engineering related issues during assembly, Testing and Inspections. Produce presentation and documentation as needed for engineering and customer reviews of design work People Focus Adhere to the Team spirit towards Driving Customer Success & Improving Business Results. Inspire “CAN DO; WILL DO” attitude in yourself. Take complete responsibility of executing assigned tasks. Maintain a positive team moral with an open atmosphere of teamwork and co-operation Co-ordination with internal & external clients for reporting status of task, resolving queries and receiving feedback. Respect & contribute actively to the SHE procedures (Safety, Health, Environment) It will be a challenge for you to further develop & expand the scope of activities and control the work done by external design agencies, onsite as well as off-site. Utilize efficiently the available contract Engineers. Technology Focus Look for the innovative techniques other than standard practices been followed. Generate innovative ideas through self-study of new technologies in market. Nurture innovative ideas and focus improvements on the product performance, cost, life, reliability, Sustainability. Promote sharing best practices across all product management teams. Promote use of advance manufacturing techniques while designing new products. Identify and implement AI-driven solutions to enhance design processes and improve overall efficiency Product Focus Suggest different CAD automation projects to automate repeated processes & to improve the quality. Follow Atlas Copco design codes, standards, work instructions & check lists of the tasks handled and carry out the checking. Ensure adherence to Quality Norms as set by the Project leader from time to time. Continually innovate the ideas to improve the Quality aspect of engineering. Create & Promote use of reusable components, product platforms, Subassemblies, Modular Designs. Promote ideas for continuous improvement & innovation To succeed, you will need Knowledge/Educational Requirements The right candidate has a bachelor’s degree Mechanical with minimum 3-5 years Industrial design experience. Should have basic knowledge of Air Compressors and designing of compressor Packages. Good knowledge in assembly technics and integration Knowledge of Sheet metal, Piping design, Flange selection, heavy fabrication. Produce and check the 3D assembly and 2D drawings. Should be familiar with design and implementation of Oil hydraulic, pneumatic systems and their controls used in compressor package. Experience of working on CAD software like Autodesk Inventor, AutoCAD, ERP (BPCS/SAP) & PLM (Enovia) system. In return, we offer you A work culture known for respectful interaction, ethical behaviour and integrity. Access to Global Job Opportunities as a part of Atlas Copco Group. Opportunities to grow and develop. Potential to see your ideas realized and to make an impact. New challenges and new learnings. City Pune Last Day to Apply 17/06/2025 Diverse by nature and inclusive by choice Bright ideas come from all of us. The more unique perspectives we embrace, the more innovative we are. Together we build a culture where difference is valued and we share a deep sense of purpose and belonging. Show more Show less

Tractebel Engineering Private Limited is a leading engineering consulting company in Energy, Water and Infrastructure space. We are an entity of one of the world’s largest engineering consulting multinational, Tractebel Engineering, headquartered in Belgium. Tractebel is a Group Company of France based multinational ENGIE. We offer great opportunities for learning. Experience an exponential growth in your career by becoming part of the Energy team, which is doing an excellent work in diversified, first of its kind projects. Mechanical Engineering (Main Plant) - Combined Cycle Power Plant Design Job Location: Gurgaon Position Overview As a Senior Manager/Sr. Manager/DGM Mechanical Engineer, with a focus on combined cycle power plants, you will play a critical role in the design and development of the main plant components (Gas Turbines, Heat Recovery Steam Generators, Steam Turbines, and related systems) for our projects. Your expertise in mechanical engineering, combined with your in-depth knowledge of international standards and guidelines, will contribute significantly to the success of our projects. Primary Responsibility Key Responsibilities: Technical Expertise: Leverage your 10-18 years of experience to provide technical leadership in the basic and detailed design of Main Plant components for combined cycle power plants. Demonstrate proficiency in hydraulic systems and various types of pumps commonly used in combined cycle power plants. Feasibility Studies and Project Reports: Utilize your experience to conduct feasibility studies and prepare detailed project reports for a variety of projects related to combined cycle power plants, assessing their viability and potential for success. Main Plant Design: Apply your expertise in main plant design to enhance the efficiency and performance of combined cycle power plants. Previous experience in these areas will be a significant advantage. Design Documentation: Take ownership of preparing essential design documentation, including Design Criteria, Process Flow Diagrams (PFDs), Piping and Instrumentation Diagrams (P&IDs), system descriptions, sizing calculations, Requests for Proposal (RFPs), tender evaluations, and vendor engineering for equipment and systems used in combined cycle power plants. Vendor Coordination: Collaborate effectively with equipment vendors, ensuring that the specified components meet the required standards and specifications. Standards and Guidelines: Apply your extensive knowledge of international standards such as ASME, HEI, ASME-TDP, API, and HIS to ensure that all design work complies with industry best practices and regulatory requirements. Communication: Possess excellent communication skills to collaborate with multidisciplinary teams, clients, and stakeholders. Effectively convey technical concepts and recommendations both verbally and in writing. Team Leadership: Provide mentorship and guidance to junior engineers, sharing knowledge and experience to foster professional growth within the team. Requirements Other Requirements & Expectations: Bachelor's degree in Mechanical Engineering or a related field. Master's degree is a plus. 10-18 years of experience in mechanical engineering, with a proven track record in combined cycle power plant design. In-depth knowledge of hydraulic systems and various types of pumps used in combined cycle power plants. Strong familiarity with international standards such as ASME, HEI, ASME-TDP, API, and HIS. Proven experience in conducting feasibility studies and preparing detailed project reports. Expertise in main plant basic and detail design for combined cycle power plants is advantageous. Proficiency in preparing design criteria, PFDs, P&IDs, system descriptions, sizing calculations, RFPs, and vendor evaluations. Excellent communication skills, both written and verbal, with the ability to convey technical information effectively. Previous experience in mentoring and guiding junior engineers. Strong problem-solving abilities and attention to detail. Your Profile Bachelor's degree in Mechanical Engineering or a related field. Master's degree is a plus. 10-18 years of experience in mechanical engineering, with a proven track record in combined cycle power plant design. Special Attributes Good communication skills Strong interpersonal skills Good Leadership skills to lead a group of engineers Self-disciplined and demonstrated capability to work in multiple projects as a team member/Project Manager Our Offer An interesting and varied job in an international environment. A stable work environment where professional growth and development are stimulated. A decent compensation package. A permanent employment to ensure the roles offered are in accordance with your skills, interests, and career goals. Tractebel welcomes candidates from all backgrounds, and actively promotes Diversity in the workforce. Business Unit: GBU Energy Solutions Division: Tractebel Div2 Legal Entity: TRACTEBEL ENGINEERING GMBH INDIA PE Professional Experience: Skilled ( >3 experience <15 years) Education Level: Bachelor's Degree Show more Show less

The Selected Candidate Will Be Responsible For Model building and drawings of building services elements. Basic design calculations. Duct & pipe sizing. Knowledge of LODs & BSRIA standards. Quantities take off based design drawings. Carrying out checking of drawings. Coordination between other MEP disciplines, such as Electrical, Plumbing services. Work within time limits to complete deliverables on time Candidate Specification Be a degree holder in Mechanical/Refrigeration and AC or equivalent in respective engineering discipline. Be proficient in drafting of HVAC systems, ducting and piping design , plant room layout, sections etc. Have good experience in relevant design software such as MicroStation/Open building design, REVIT, BIM 360, knowledge in Dynamo is preferred. Good communication skills and a professional attitude towards work , be a team player and have multi-disciplinary co-ordination skills We Can Offer (subject To Company’s Policy) Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmen’s compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Location(s): Noida, UP, IN Bengaluru, KA, IN Contract Type: Permanent Work Pattern: Full Time Market: Buildings Discipline: Building services Job Ref: 7767 Recruiter Contact: Deiveegan Eshwaran Show more Show less

We deliver the world’s most complex projects. Work as part of a collaborative and inclusive team . Enjoy a varied & challenging role. Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia. Right now, we’re bridging two worlds as we accelerate to more sustainable energy sources, while helping our customers provide the energy, chemicals and resources that society needs now. We partner with our customers to deliver projects and create value over the life of their portfolio of assets. We solve complex problems by finding integrated data-centric solutions from the first stages of consulting and engineering to installation and commissioning, to the last stages of decommissioning and remediation. Join us and help drive innovation and sustainability in our projects. The Role As a Senior Piping Engineer with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc…. Understanding of Project requirements like productivity/ schedule workhour control etc. Capable of interacting with all stakeholders including client and vendors. Have good understanding of requirements from other disciplines like Civil/Structural / Electrical & Instrumentation / Mechanical etc. Good communication and presentation skills, verbal and written to communicate with client and lead offices. Support proposal engineering Knowledge in piping software like E3D, S3D, CAESAR II. Knowledge of national, international codes and standards, Technical Bid Analysis, Vendor data reviews. Orientation to working in workshare and global integrated delivery environments In depth knowledge of 3D model, layout engineering, piping engineering, Technical Specification, Tender Bid Evaluation, and review of Vendor drawings / document independently for piping components of Mineral Beneficiation plant, DRI Plant, Battery Materials Plant, Material Handling Plant and overall knowledge in Furnace, Mills, Cyclone, Floatation Cell, Sizers, Thickener, Filter Press, Pumps, Compressors, heat exchanger etc. About You To be considered for this role it is envisaged you will possess the following attributes: Graduate Mechanical/Production/Chemical engineer with 18+ years of Piping, Utility (Fluid System) Engineering exposure in a consultancy organization. Experience range can be flexible for deserving candidate Candidates with experience in technical services department of a Metal / Mineral / Steel / Chemical Processing plant can also apply. However at least 10 years of engineering consultancy experience (Metals and Minerals projects preferred) will be required. Worked as Lead Piping Engineer in projects for minimum 10 years and Excellent managerial capability and should have worked as Manager / Chief Engineer in a reputed Mining Mineral and Metal Consultancy / EPC organization / Mining Mineral and Metal MNC completed at least 4-5 projects with a piping team of 20-25 people. Capable to mentor, lead and guide a group of Piping Engineers & Designers and able to take decision independently Experience in phases of engineering e.g., Concept, Basic and Detail Engineering phases Experience in providing visible leadership and governance in engineering delivery Experience in people management, performance evaluation Should be open for short travel and deputation to sites / lead offices where required. Moving forward together We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We’re building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Worley takes personal data protection seriously and respects EU and local data protection laws. You can read our full Recruitment Privacy Notice Here. Please note: If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Worley. Company Worley Primary Location IND-WB-Kolkata Job Piping Schedule Full-time Employment Type Employee Job Level Experienced Job Posting Mar 25, 2025 Unposting Date Jun 30, 2025 Reporting Manager Title Manager Show more Show less

Company Description Sankalp Engineers, based in Pune, specializes in precision-engineered components and systems for industrial applications. We are a PED Approved, ISO 9001:2015 Certified, and IBR Approved company known for delivering high-quality, reliable, and performance-driven products. Our key offerings include a wide range of flanges, weld fittings, flow meters, pressure vessels, piping systems, and custom fabrications. We cater to various industries including Oil & Gas, Chemicals, Pharmaceuticals, and more, ensuring optimal performance, safety, and reliability in every project we undertake. Role Description This is a full-time, on-site role in Kanpur, Uttar Pradesh, India for an Independent Distributor. The Independent Distributor will be responsible for identifying and engaging potential clients, managing sales processes, and coordinating orders and deliveries. Tasks will include market research, client meetings, promoting product offerings, and ensuring customer satisfaction. Daily responsibilities also encompass maintaining detailed records of interactions and transactions, and collaborating with various departments to align sales strategies with business objectives. Qualifications Sales and Marketing skills – expertise in managing sales processes, promoting products, and engaging with clients Communication and Interpersonal skills – strong verbal and written communication abilities, and effective client relationship management Organizational and Analytical skills – ability to conduct market research, maintain detailed records, and analyze sales data for insights Technical Understanding – familiarity with industrial products and components, especially those relevant to the sectors we serve Proven experience in a similar role within industrial or manufacturing settings Ability to work independently and manage time effectively Bachelor’s degree in Business, Marketing, Engineering, or related field Show more Show less

Tractebel Engineering Private Limited is a leading engineering consulting company in Energy, Water and Infrastructure space. We are an entity of one of the world’s largest engineering consulting multinational, Tractebel Engineering, headquartered in Belgium. Tractebel is a Group Company of France based multinational ENGIE. We offer great opportunities for learning. Experience an exponential growth in your career by becoming part of the Energy team, which is doing an excellent work in diversified, first of its kind projects. Mechanical Engineering (Main Plant) - Combined Cycle Power Plant Design Job Location: Gurgaon Position Overview As a Senior Manager/Sr. Manager/DGM Mechanical Engineer, with a focus on combined cycle power plants, you will play a critical role in the design and development of the main plant components (Gas Turbines, Heat Recovery Steam Generators, Steam Turbines, and related systems) for our projects. Your expertise in mechanical engineering, combined with your in-depth knowledge of international standards and guidelines, will contribute significantly to the success of our projects. Primary Responsibility Key Responsibilities: Technical Expertise: Leverage your 10-18 years of experience to provide technical leadership in the basic and detailed design of Main Plant components for combined cycle power plants. Demonstrate proficiency in hydraulic systems and various types of pumps commonly used in combined cycle power plants. Feasibility Studies and Project Reports: Utilize your experience to conduct feasibility studies and prepare detailed project reports for a variety of projects related to combined cycle power plants, assessing their viability and potential for success. Main Plant Design: Apply your expertise in main plant design to enhance the efficiency and performance of combined cycle power plants. Previous experience in these areas will be a significant advantage. Design Documentation: Take ownership of preparing essential design documentation, including Design Criteria, Process Flow Diagrams (PFDs), Piping and Instrumentation Diagrams (P&IDs), system descriptions, sizing calculations, Requests for Proposal (RFPs), tender evaluations, and vendor engineering for equipment and systems used in combined cycle power plants. Vendor Coordination: Collaborate effectively with equipment vendors, ensuring that the specified components meet the required standards and specifications. Standards and Guidelines: Apply your extensive knowledge of international standards such as ASME, HEI, ASME-TDP, API, and HIS to ensure that all design work complies with industry best practices and regulatory requirements. Communication: Possess excellent communication skills to collaborate with multidisciplinary teams, clients, and stakeholders. Effectively convey technical concepts and recommendations both verbally and in writing. Team Leadership: Provide mentorship and guidance to junior engineers, sharing knowledge and experience to foster professional growth within the team. Requirements Other Requirements & Expectations: Bachelor's degree in Mechanical Engineering or a related field. Master's degree is a plus. 10-18 years of experience in mechanical engineering, with a proven track record in combined cycle power plant design. In-depth knowledge of hydraulic systems and various types of pumps used in combined cycle power plants. Strong familiarity with international standards such as ASME, HEI, ASME-TDP, API, and HIS. Proven experience in conducting feasibility studies and preparing detailed project reports. Expertise in main plant basic and detail design for combined cycle power plants is advantageous. Proficiency in preparing design criteria, PFDs, P&IDs, system descriptions, sizing calculations, RFPs, and vendor evaluations. Excellent communication skills, both written and verbal, with the ability to convey technical information effectively. Previous experience in mentoring and guiding junior engineers. Strong problem-solving abilities and attention to detail. Your Profile Bachelor's degree in Mechanical Engineering or a related field. Master's degree is a plus. 10-18 years of experience in mechanical engineering, with a proven track record in combined cycle power plant design. Special Attributes Good communication skills Strong interpersonal skills Good Leadership skills to lead a group of engineers Self-disciplined and demonstrated capability to work in multiple projects as a team member/Project Manager Our Offer An interesting and varied job in an international environment. A stable work environment where professional growth and development are stimulated. A decent compensation package. A permanent employment to ensure the roles offered are in accordance with your skills, interests, and career goals. Tractebel welcomes candidates from all backgrounds, and actively promotes Diversity in the workforce. Business Unit: GBU Energy Solutions Division: Tractebel Div2 Legal Entity: TRACTEBEL ENGINEERING GMBH INDIA PE Professional Experience: Skilled ( >3 experience <15 years) Education Level: Bachelor's Degree Show more Show less

Role Description This is a full-time on-site role for a Process Design Engineer based in Ahmedabad. The Process Design Engineer will be responsible for the design and optimization of chemical processes, including calculations, process engineering, and wastewater treatment process design. The day-to-day tasks involve conducting detailed engineering calculations, developing process flow diagrams, and ensuring compliance with industry standards and regulations. Key Responsibilities/duties · Prepare Design Basis documents. ·Develop Basic Engineering Packages (BEP) and Front-End Engineering Design (FEED). ·Create Process Flow Diagrams (PFD) and Piping & Instrumentation Diagrams (P&ID). ·Conduct Heat & Mass Balance calculations. ·Design process equipment such as heat exchangers, columns, and reactors. ·Size Pressure Safety Valves (PSV) and Emergency Relief Valves (ERV). ·Summarize and size utilities. ·Develop Process Control Philosophy and Control Narratives. ·Size and specify process equipment. ·Prepare Process Data Sheets (PDS) and Instrument Process Data Sheets (IPDS). ·Compile Equipment and Line Lists. ·Experience in chemical process industries or a similar chemical engineering process field, with strong consulting background. ·Strong aptitude in Chemical Engineering. ·Good understanding of process unit operations and process calculations, including principles of heat exchangers, distillation, fluid flow, and reactions. ·Analytical thinking and problem-solving skills. Excellent interpersonal skills and ability to work in a team. ·Strong technical communication skills, with the ability to effectively communicate with other discipline engineers to understand and solve their issues. ·Working experience with HYSYS and HTRI software. ·Experience in designing various process equipment and engineering concepts. ·Active participation in HAZID, HAZOP, SOP, and Process Safety development. ·Proficiency in preparing PFDs, P&IDs, Heat and Mass ·Balance calculations, and process equipment sizing. Ability to analyse, optimize, and troubleshoot chemical process plant equipment and machinery. ·Experience in preparing process datasheets for ·equipment such as distillation columns, separators, reactors, and heat exchangers. ·Execution of debottlenecking projects and expansion studies. ·Understand MOC selection. Company Description Since its inception in 1963, SMPS Consultants LLP has been a leading organization of architects, engineers, and consultants, offering comprehensive services in planning, design engineering, and management of diverse industrial and infrastructure projects. With a team of specialists across twelve different sectors, SMPS has successfully executed over 2500 projects. The company leverages world-class technologies, software, and systems to ensure smooth, smart, and efficient project execution. SMPS covers all aspects of a project from concept to feasibility, drawings and bill of material, cost estimates, and project planning and management. Our clients rely on our expertise to drive challenging capital projects to completion. Show more Show less

Exp- 4- 15 Years Responsible for compiling and verifying design documents (P&IDs, datasheets, BOMs), modeling piping layouts, generating isometrics, experience in Plant 3D. Complete designs efficiently and support department operations, BOM, Skid GA.

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer – Structures for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of structures in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power plant, Chemical process plant, Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer- structures on mining projects. Prepare foundation, steel, and concrete structure designs in compliance with industry standards. Perform analysis and design using software like Space Gass, STAAD Pro, SACS, Tekla, E3D, or S3D. Solid understanding of Australian Standards (AS) and international codes. Coordinate with other engineering disciplines (piping, mechanical, electrical, instrumentation) for seamless project execution. Prepare civil and structural drawings, specifications, and design calculations. Calculate loads and select structural members based on forces and service demands. Design structural solutions for industrial, commercial, and institutional projects of various sizes with the main focus on industrial projects. Design of shallow and deep foundations, concrete piles, underground concrete vaults and tunnels, and slab reinforcement for a variety of loading conditions. Design of steel structures including building, additions, access platforms including ladder and stair details, trusses, two-legged bents and four-legged support towers. Develop a variety of structural connections including unique connections caused by field interferences. Verify field conditions, constructability of designs, and assist in resolving problems during field construction. Interpreting and designing from a variety of different domestic and foreign structural building design codes. Develop familiarity with WSP standard drawings, specifications, general practices, procedures, Client specific standards. Prepare reports, designs, and drawings. Redline drawings for CAD Designers and review updated submittals for accuracy. Establishing and maintaining effective working relationships with clients, contractors, suppliers and team members. Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Coordinating with Australian lead offices as per project requirement. Actively participate in the design and provide input to the design team throughout the design process. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in AU. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English (both written and verbal) communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing or site experience in steel, concrete structure. Ability to work in a fast-paced environment with strict deadlines. Effective leadership capability, coaching and mentoring skills Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in structures engineering. Minimum of a bachelor’s degree in civil & preferred master’s degree in civil/structure engineering. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage. Show more Show less

We deliver the world’s most complex projects Work as part of a collaborative and inclusive team Enjoy a varied & challenging role Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia. Right now, we’re bridging two worlds as we accelerate to more sustainable energy sources, while helping our customers provide the energy, chemicals and resources that society needs now. We partner with our customers to deliver projects and create value over the life of their portfolio of assets. We solve complex problems by finding integrated data-centric solutions from the first stages of consulting and engineering to installation and commissioning, to the last stages of decommissioning and remediation. Join us and help drive innovation and sustainability in our projects. The Role As a Discipline Manager- Mechanical with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc…. Capable to mentor, lead and guide a group of Mechanical Engineers & Designers and able to take decision independently. Worked as Lead Mechanical Engineer in projects for minimum 10 years over and above managing a Mechanical team. Experience in phases of engineering e.g., Concept, Basic and Detail Engineering phases Experience in providing visible leadership and governance in engineering delivery Experience in people management, performance evaluation, resource planning, recruiting etc. Assessing and maintaining capability/competency matrix of the team and arranging for necessary trainings and upskill/re skill where necessary. Monitoring project needs and planning for appropriate assignments Assigning staff to projects, taking due notice of project schedule Maintaining current project listing of personnel, noting their assignments, tasks, and expected durations and planning their future assignments Reviewing, approving, and monitoring engineering work hour estimates. Developing, coordinating, and implementing new methods, standards and work instructions that affect the department and benefit the company. Providing technical solution to issues, quality assurance including development of departmental design standards and engineering Experience in core areas of Mechanical discipline e.g. preparing equipment layouts, technical specifications, datasheets, Material Requisitions, knowledge of national, international codes and standards, Technical Bid Analysis, Vendor data review, 3D Model Reviews. Experience in Material Handling, Equipment associated with MMM industry. Orientation to working in workshare and global integrated delivery environments. Knowledge in Mech software like Beltstat, Sidewinder, PV Elite Understanding of Project requirements like productivity/ schedule workhour control etc. Capable of interacting with all stakeholders including client and vendors. Have good understanding of requirements from other disciplines like Process, Piping / Electrical & Instrumentation / Civil & Structural etc. Good communication and presentation skills, verbal and written to communicate with client and lead offices. Support proposal engineering Should be open for short travel and deputation to sites / lead offices where required. About You To be considered for this role it is envisaged you will possess the following attributes: Graduate Mechanical engineer with 22+ years of Engineering exposure in the Mechanical Department of a consultancy organization. Experience range can be flexible for deserving candidate Candidates with experience in technical services department of a Metal / Mineral / Chemical Processing plant can also apply. However at least 10 years of engineering consultancy experience (Material Handling, Mineral Processing projects preferred) will be required. Moving forward together We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We’re building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Worley takes personal data protection seriously and respects EU and local data protection laws. You can read our full Recruitment Privacy Notice Here. Please note: If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Worley. Company Worley Primary Location IND-WB-Kolkata Job Mechanical Schedule Full-time Employment Type Employee Job Level Experienced Job Posting Jan 14, 2025 Unposting Date Jul 1, 2025 Reporting Manager Title Engineering Manager Show more Show less

L&T Technology Services is #hiring for Lead Piping Design Engineer in Vadodara!! Looking only immediate joinee. JD: Job Description: Senior Mechanical & Piping Design Engineer (Chemical/FMCG/Pharmaceutical Industry) – 12 Years of Experience Job Title: Senior Mechanical & Piping Design Engineer Location: Vadodara Experience: 12+ Years Industry: Chemical / FMCG / Pharmaceutical Job Summary: We are seeking a highly experienced Senior Mechanical & Piping Design Engineer with 12+ years of experience in the Chemical, FMCG, or Pharmaceutical industry. The ideal candidate will lead the design, development, and optimization of mechanical, piping, rotary, and static equipment for process plants. Expertise in process plant design, piping systems, HVAC integration, and rotating/static equipment selection is essential. Experience in large-scale industrial projects, cleanroom environments, and regulatory compliance (ASME, API, TEMA, etc.) is highly preferred. Key Responsibilities: 1. Mechanical & Piping System Design · Lead the design and engineering of piping systems, including process, utility, and HVAC-related piping. · Prepare and approve P&IDs, isometric drawings, and general arrangement (GA) layouts. · Ensure optimal selection and layout of pumps, compressors, heat exchangers, pressure vessels, storage tanks, and reactors. 2. Rotary & Static Equipment Engineering · Oversee the design, selection, and specification of rotary equipment such as pumps, blowers, compressors, agitators, turbines, and fans. · Lead the engineering of static equipment, including pressure vessels, heat exchangers, storage tanks, boilers, and reactors, ensuring compliance with ASME Sec VIII, TEMA, API 650, PED, and other industry codes. · Assess and optimize mechanical seals, bearings, lubrication, and cooling systems for long-term reliability. · Perform Root Cause Analysis (RCA) and Failure Mode and Effects Analysis (FMEA) for equipment failures and propose corrective actions. 3. Site Support & Construction Supervision · Provide technical leadership during project execution, including piping installation, mechanical equipment erection, and commissioning. Interested please send me your updated resume to devi.natarajan@ltts.com Kindly refer to your friends and colleagues. Regards N Devi Show more Show less

We deliver the world’s most complex projects. Work as part of a collaborative and inclusive team. Enjoy a varied & challenging role. Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia. Right now, we’re bridging two worlds as we accelerate to more sustainable energy sources, while helping our customers provide the energy, chemicals and resources that society needs now. We partner with our customers to deliver projects and create value over the life of their portfolio of assets. We solve complex problems by finding integrated data-centric solutions from the first stages of consulting and engineering to installation and commissioning, to the last stages of decommissioning and remediation. Join us and help drive innovation and sustainability in our projects. The Role As a Piping Material Engineer with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc…. You will provide Piping Engineering services to Worley, and its customers and may provide technical support within the Piping team. Ensure compliance with various ASME, API & IBR codes and standards. Perform valve take off from P&IDs. Review Piping isometrics take-offs. Keep track of all Design changes and managing surplus / needs. Monitor material requirements and adjust material delta requisitions. Learn to develop and update requisitions within the ERM system. Knowledgeable compiling of requisition packages with all applicable documents. Design and selection of Piping Material Specification for Piping Systems. Preparation of Piping Line Class Specifications. Preparation of Pipe Wall Thickness Calculations. Preparation of Valve Material Specifications. Preparation of MR (Material Requisition) for Getting Quotations. Review the Vendor offers, do technical discussions with the vendors, and prepare TBE (Technical Bid Evaluation). Preparation of Material Requisition for Purchase. Technically Qualify for Vendor Documents Review. Prepare the list of Piping Specialty Items like Steam Traps, Strainers, Hoses, etc. Preparation of Valve Data Sheets. Preparation of Data Sheets for the Piping Specialty Items. Preparation of Line Blank Thickness Calculation. Preparation of Reinforcement PAD Requirement calculation. Preparation of Pipe Sleeve Thickness Calculation. Familiar with Material Grades ASTM, ASME, API, etc. Knowledge in Testing and Inspection Requirements for Piping Components and Valves Compliance with Specifications and Industrial Quality Standards. To be considered for this role it is envisaged you will possess the following attributes: Minimum 7 to 12 years’ experience in the offshore Oil & Gas industry. Good Communication Skill. English Fluent in Speaking and Writing. Good Team Player. Self-Motivated with a Drive for Results, Improvement, and Innovation. Bachelor’s degree in engineering in the relevant discipline or equivalent. Moving forward together We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We’re building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Worley takes personal data protection seriously and respects EU and local data protection laws. You can read our full Recruitment Privacy Notice Here. Please note: If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Worley. Company Worley Primary Location IND-AP-Hyderabad Job Piping Schedule Full-time Employment Type Employee Job Level Experienced Job Posting May 13, 2025 Unposting Date Jun 13, 2025 Reporting Manager Title Manager Show more Show less

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer – Structures for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of structures in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power plant, Chemical process plant, Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer- structures on mining projects. Prepare foundation, steel, and concrete structure designs in compliance with industry standards. Perform analysis and design using software like Space Gass, STAAD Pro, SACS, Tekla, E3D, or S3D. Solid understanding of Australian Standards (AS) and international codes. Coordinate with other engineering disciplines (piping, mechanical, electrical, instrumentation) for seamless project execution. Prepare civil and structural drawings, specifications, and design calculations. Calculate loads and select structural members based on forces and service demands. Design structural solutions for industrial, commercial, and institutional projects of various sizes with the main focus on industrial projects. Design of shallow and deep foundations, concrete piles, underground concrete vaults and tunnels, and slab reinforcement for a variety of loading conditions. Design of steel structures including building, additions, access platforms including ladder and stair details, trusses, two-legged bents and four-legged support towers. Develop a variety of structural connections including unique connections caused by field interferences. Verify field conditions, constructability of designs, and assist in resolving problems during field construction. Interpreting and designing from a variety of different domestic and foreign structural building design codes. Develop familiarity with WSP standard drawings, specifications, general practices, procedures, Client specific standards. Prepare reports, designs, and drawings. Redline drawings for CAD Designers and review updated submittals for accuracy. Establishing and maintaining effective working relationships with clients, contractors, suppliers and team members. Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Coordinating with Australian lead offices as per project requirement. Actively participate in the design and provide input to the design team throughout the design process. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in AU. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English (both written and verbal) communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing or site experience in steel, concrete structure. Ability to work in a fast-paced environment with strict deadlines. Effective leadership capability, coaching and mentoring skills Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in structures engineering. Minimum of a bachelor’s degree in civil & preferred master’s degree in civil/structure engineering. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage. Show more Show less

• Experience: between 5-10 years • Immediate Joiners (preferred) Job Responsibilities: • Prepare designs, sketches and production of all types of Structural GA and detailed drawings. • Prepare bill of quantities and materials take-off list. • Checking and approving of drawings prior to submission for costumer’s review. • Checking and approving of bill of quantities and MTO list prior to submission for costumer’s review • Supervision and coordination of all Structural designing and drafting works within assigned projects. • Delegates designing and drafting works to designers and draftsmen within the discipline. • Coordinate with Lead Discipline Engineers for all Design and Drafting supports required for assigned projects. • Must be able to perform site visits & inspections, data gathering activities and technical evaluations that are relevant to assigned tasks and works. • Must be able to complete the assigned tasks and deliverables within the allotted budget and schedule. • Must have supervisory skills to manage all discipline design and drafting works for the assigned projects. • Responsible for the overall production and quality of all drawings, BOQ, MTO lists and other design deliverables. • Assist in the preparation of technical details for quotations, contract documentation and technical specifications. • Liaise with clients, consultants or engineers concerning the design, and assigned work. • Participate in the planning of projects as required. • Essential Skills & Experience Qualification: Diploma in Drafting Technology or equivalent. Specialization- Offshore Structures Preferred Experiences • Minimum 10 years total working experience. • At least 10 years’ experience in design and drafting works, preferably in Hydrocarbon facilities • Minimum 5 years’ experience as Senior/Lead Designer and checker • At least 5 years’ experience in design and drafting works for infrastructure projects. (preferred) • Familiar with International codes and standards such as ACI, AISC, BS, UBC/IBC, etc. that are relevant to design and drafting works. • Familiar with basic International Design and Drafting standards. • Expert user of Micro Station Tekla, E3D software. • Experience multiple projects will be added advantage Skill Set: • Ability to work within a multi-disciplinary team including process, mechanical, structural, electrical, instrumentation and piping etc. • Proven ability to collaborate with team members from project management, estimating, and project controls • Strong organizational skills, technical competence, and attention to detail • Proficiency in Micro Station Tekla, E3D software. • Strong analytical skills and ability to produce coherent, self-explanatory reports such as technical documents, market research analysis and business advisory. • Team Player Show more Show less