127 Pid Jobs - Page 4

Description of the position: Project & Commissioning Engineer Job Title: Project & Commissioning Engineer Department: Projects Experience: 0-2 Years Job Location: Nashik, Maharashtra Qualification: B. Tech Chemical Job Overview : Fabex Engineering is seeking a Project and Commissioning Engineer with a Chemical Engineering degree. Responsibilities include overseeing the installation and commissioning of chemical process equipment, ensuring safety compliance, conducting pre- commissioning checks, and providing technical support. Strong communication and collaboration skills are essential. If you're ready for this challenging role, apply now! Roles Responsibility : • Prepare PIPING and Instrumentation Diagram on AutoCAD. • Review of GA drawings, 3D/2D layout, Piping routing • Prepare Bought-Out Datasheets, RFQs, and co-ordinate with vendors for procurement. • Responsibility of preparing & submitting the project schedule (Bar Chart) as per Deliverables to Client and update actuals on weekly basis. • Have to co-ordinate client regarding P&ID, GA, layout approvals. • Time to time arrange the internal review meeting regarding the project progress and other approvals with the whole team. • Keeping the daily updates of the current job status and sending it to the client on weekly/daily report format. • Testing: Have to conduct internal and final factory acceptance tests. (FAT) • Prepare DQ/OQ/IQ, Operational Manual & Control Philosophy. • Auto Cad is Must • Knowledge of MS Office (Specially MS Excel) • Process Calculations Skills & Experience • Detailed calculations related to process equipment sizing & selection Preparation of process operation sequence logic and interlocks systems for chemical plant. • Heat and Mass Transfer Calculations. • Preparation of specification datasheets of chemical process equipment, utility systems & ETP systems. • Co- ordinate with project execution team on project planning, communication & support. • Testing: Have to conduct internal and final factory acceptance tests. (FAT) • Willing to go on site for commissioning activities (Location: PAN India) • Communicate commissioning issues, queries and concerns through proper channels in a timely manner. The employer has the right to modify the job description's content at any moment according to the organization's changing needs.

Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to help. join@vertivco. com. If you are interested in applying or learning more about this role, please visit the company s career page located on Vertiv. com/Careers Job Description: 5 to 8 years of experience in firmware development, C & C++ experience is a must. Work independently on firmware development projects. Firmware Design exposure and implement the firmware consisting of control functions, communication protocols, drivers running on windows/Linux or a real-time operating system. Coordinate and interface with other global design and development teams. Contribute to project requirements analysis, understand the firmware design documents and develop firmware in C/C++ technologies. Conduct software peer and code reviews. Recommend plan to improve software quality in products. Responsibilities- BE - Computer Science \ Electronics Engineering or Equivalent 5 to 8 years of experience in firmware development C experience is a must Exposure to microcontrollers, Digital Signal Processor (DSP) is must Exposure to different peripherals and drivers like ADC, PWM, Comparators, DAC is must. Exposure to power electronics firmware development, DC-DC converters, Rectifiers etc. Exposure to control systems, PID control will be an added advantage. Interfacing with communications protocols such as CAN, I2C, SPI, Ethernet & SNMP protocol is preferred Own the project and coordinate with functional contacts at different locations Ability to develop readable, robust, reliable, well-structured code is a must Ability to review code for readability, and robust/reliable operation in a software system is a must 12. Real-time operating system experience is preferred. Ability to communicate effectively in both written and spoken English Good Interpersonal skills & Strong Team Player Qualifications: 5 to 8 years of experience in firmware development BE - Computer Science \ Electronics Engineering or Equivalent C experience is a must Exposure to microcontrollers, Digital Signal Processor (DSP) is must Exposure to different peripherals and drivers like ADC, PWM, Comparators, DAC is must. Exposure to power electronics firmware development, DC-DC converters, Rectifiers etc. Exposure to control systems, PID control will be an added advantage. Interfacing with communications protocols such as CAN, I2C, SPI, Ethernet & SNMP protocol is preferred Own the project and coordinate with functional contacts at different locations Ability to develop readable, robust, reliable, well-structured code is a must Ability to review code for readability, and robust/reliable operation in a software system is a must Real-time operating system experience is preferred. Ability to communicate effectively in both written and spoken English Good Interpersonal skills & Strong Team Player Additional / Preferred Qualifications: Physical & Environmental Requirements: To be used majorly for manufacturing jobs. Time Travel Needed: The successful candidate will embrace Vertiv s Core Principals & Behaviors to help execute our Strategic Priorities. Our core Principals: Safety, Integrity, Respect, Teamwork, Diversity & Inclusion. Our strategic Priorities: Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength Our Behaviors: Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Taking care of Corporate claims process One point contact for PID Creation and New MOU fallow up & collection External Surveyors fallow-up Back support for a team and an average of 800 Payment posting Attending phone calls of customers HO Co-ordination for repair portal ID creations

Maintenance Engineer with 3+ years of experience in Textile, Printing, Packaging industry Must have expertise in mechanical (machines, pneumatics, hydraulics, compressors) Electrical/instrumentation (PLC, sensors, PID, motors, UPS, stabilizers).

1. Getting task from supervisor and to complete it within the schedule. 2.To study the P&ID\u2019s, project documents and standards as per requirements. 3.Routing of pipes and modifications during non-checking time. 4.Checking of all piping documents like Isometrics, piping plans, plot plans, pipe supports etc. prepared by the Designers. 5.Checking of VPE P&IDs for PID projects. 6.To issue all the deliverables through Leads. 7.To guide/clarify juniors on routing and any other necessary support required. 8.To ensure quality delivery on time by meeting the required specification. 9.Master P&ID marking and updating/monitoring change log sheets. 10.To identify any unusual or specific features which affect the safe and efficient installation, operation and maintenance of piping systems and equipments. 11.To follow all relevant project guidelines and departmental work instructions in the design and drawing of equipments and piping systems. 12.To attend training courses, seminars, internal meetings etc. when required. 13.Maintain proper documentation during project life cycle. 14.Any other relevant activities as defined by the Manager/Lead.

1. Getting task from supervisor and to complete it within the schedule. 2.To study the P&ID\u2019s, project documents and standards as per requirements. 3.Routing of pipes and modifications during non-checking time. 4.Checking of all piping documents like Isometrics, piping plans, plot plans, pipe supports etc. prepared by the Designers. 5.Checking of VPE P&IDs for PID projects. 6.To issue all the deliverables through Leads. 7.To guide/clarify juniors on routing and any other necessary support required. 8.To ensure quality delivery on time by meeting the required specification. 9.Master P&ID marking and updating/monitoring change log sheets. 10.To identify any unusual or specific features which affect the safe and efficient installation, operation and maintenance of piping systems and equipments. 11.Maintain proper documentation during project life cycle. 12.Any other relevant activities as defined by the Manager/Lead.

Title: Manager - Process Engineering - Technology Transfer Level : Manager Qualification: BE / B.Tech in Chemical Engg (Mandatory) In Pharma / API Industry / Crop Sciences / Speciality Chemicals This opening is for those working presently at R&D Centres only. Those associated with Plants will not be eligible. Experience: Minimum 10 years to 15 years. Team : 3-4 Those working without a team below are in-eligible. Working : Alternate Saturday off. We need Chemical Engineers working at R&D Centres in Process Engg function and taking care of Technology Transfer. Industry: You should be working in Process Engineering taking care of Technology Transfer, Scale Up, Kilo Lab, Pilot Plants. Continuous Flow Chemistry etc. Those working in Technology Absorption are not eligible or working in Factory Technical Services Team are not eligible. Key Responsibilities include : Proceeding the scale up of process from R&D to the Large-scale plants Interacting closely with all departments and other functions to actively participate for end-to-end development process. Preparation of PFD and P&IDs. Supporting cost reduction programs with strong quality-based approach Evaluating batch trends to identify variables for continuous yield and quality improvement Observe process in the laboratory & generate data for scale-up. Carry out relevant process engineering calculations for scale up of unit operations Prepare mapping, material, and energy balance for the process Evaluate and propose alternate & best technology for process at commercial scale Transferring the process technology on commercial scale at manufacturing plant Prepare tech transfer report and ensure handover of the process to plant technical team. Prepare periodic progress report on the project Working knowledge of Aspen HYSYS , HTRI

Job Title: CAD Engineer - Proposal Function / Department: Process & Proposal About Wipro Water Wipro Water is a Business Unit of Wipro Infrastructure Engineering (a division of Wipro Enterprises Ltd) headquartered in Mumbai. Wipro Water offers Complete Solutions in Water & Waste Water Treatment, O&M, Desalination, Sustainability Consulting, Recycle & Reuse, Sludge Treatment and Source Analysis. Website: www.wiprowater.in Desired Candidate Profile: Qualifications: Desired Experience: Yrs of Exp / Nature of Exp ITI/Diploma 7-8 YEARS in water industry Key Skills Required: Areas of expertise / skills Knowledge of PID of PT, DM, UF, RO plant Worked in process & proposal department for WTP & WWTP Knowledge of symbols, tagging, MOC for various piping and instruments, interlocking philosophy. Good communication skills Target Companies: Ion exchange/ Thermax/ VAtech WABAG/ Pennar/ Aquatech Position Details Key Accountabilities: List the key areas of responsibility Preparation of PID/layout for WTP / WWTP plants. Preparation of LAYOUT for WTP / WWTP plants. Preparation of HFD for WTP / WWTP plants Post order preparation of PID for WTP / WWTP plants. Reporting: Mention reporting relationships Head - Urban & Export Work Location Airoli, Navi Mumbai

Manage PLC SCADA projects from design to commissioning Provide expert support on instrumentation controls (PID controllers, sensors, switches, etc.) Collaborate with teams to ensure seamless project execution Troubleshoot solve technical challenges for clients Qualification: Diploma/B.E in Electronics/IC

Job Details: Service Engineer - Customer Excellence Full details of the job. Vacancy Name Service Engineer - Customer Excellence Vacancy No VN690 Employment Type Full-Time Shift Duration (if temporary) India Surat Description An Automation engineer is responsible to perform maintenance, commissioning Installation activities, troubleshooting of Process Control Valve systems, Flow meters, Hot water system control panels and sensors. This position will report to Manager Customer Excellence. Key Responsibilities - Analyze and determine the necessary repair/replace of the spares and equipment at site. - Maintenance, commissioning and troubleshooting of Hot water system, Condensate Recovery System, Control valves, PID controller and Flow meter systems. - Providing technical and maintenance training to customers about the product. - Basic knowledge of Siemens/Allen-Bradley PLC SCADA software, and able modifying program as per requirement. - Knowledge on PID, HMIs and Industrial communication protocols. - Understanding of SLD, Control Wiring Drawings and troubleshoot of the systems. - Basic knowledge of IOTs and IIOTs. - Prepare reports, technical manual preparation activities, ensure proper handover of the system to the customer, obtain signed site acceptance reports, and submit weekly and daily reports. - Knowledge of Pre-commissioning and Commissioning Protocols standards. - Willing to travelling in PAN India as per requirements. Key Requirements - Knowledge of Steam and Steam accessories like condensate pump and steam traps. - Knowledge about Control panels and Power panels and their wiring. - Reading and understanding Electrical drawings Piping and Instrumentation Diagram. Education Level Bachelors Degree or equivalent Experience Level 3-5 years Benefits Physical Requirements

Design and detail engineering of Biogas / Compressed Biogas projects , preparation of Request for Proposal , Evaluation of techno-commercial proposal for equipment Experience in Biogas , Compressed Biogas , Wastewater treatment , Effluent Treatment , Sewage treatment Rewards on milestone achievements

Description and Requirements GOSC- GG10- Data Scientist (IC) Position Title: Senior Data Scientist (IC) Function, Responsibility Level: Reports to (Responsibility Level): GG13 Director Data science or GG12 Lead Data Scientist Supervises: Location: Hyderabad/Noida Global Grade: 10 Cost Center (85 series): #### Complexity: PID/s Load Mapping: Position Summary Continuing with the tradition of innovation, MetLife, as part of its Data and Analytics function, has established a Data and Analytics (DnA) center in India. The setup of DnA center is a key multi-year strategic initiative focused on scaling business solutions using AI, data science, data governance, data engineering, business intelligence, agile project management capabilities, enabling more cost-effective analytics operating model and increasing AI maturity across the MetLife global community. Role Value Proposition: We are looking for you: high performing data and analytics professional - driven by passion and purpose, to drive quality standards and support end-to-end development of actionable, high-impact AI solutions for MetLife s enterprise functions and lines of businesses across markets. This position requires hands-on experience of developing an end-to-end Machine Learning/AI solution that can be leveraged for maximum business impact through on prem /cloud in both real time and batch mode depending upon business requirements. The role would collaborate with multiple stakeholders under the guidance of Lead/Director Data scientists to develop robust, stable, and scalable advanced analytics/machine learning solutions leveraging new age methodologies/techniques. Superior problem-solving ability, curiosity, strong coding skills and attention to detail are the key success factors. Job Responsibilities Hands on development and implementation of AI/ generative AI models algorithms to solve complex problems and drive innovation across organization. Collaborate with Lead Data Scientist/AI product owner to translate given business problem into analytical use-cases with defined outcomes. Perform data exploration, machine learning models development active collaboration with cross functional teams Contribute to the implementation of AI solutions to deliver business impact with focus on value, success criteria alignment, scalability, and operationalization. Drive best practices throughout development process, efficient coding and publish learnings/feedback for continuous learning. Drive innovation within teams, by enhancing existing solutions and designing new ones. Knowledge, Skills, and Abilities Education Bachelor s/master s degree in an information technology/computer science or relevant domain Experience Technology Skills 3-5 years of hands-on experience in Analytics, data science or similar function Strong hands-on proficiency in any of Data Science technologies i.e., Python, PySpark, , R have experience in machine learning libraries frameworks such as TensorFlow, PyTorch, or Keras. Strong hands-on expertise in traditional as well as modern statistical ML techniques like regression, support vector machines, Regularization, Boosting, Random Forests other ensemble methods. Good Understanding of NLP models using: Nltk, spacy, Word 2 Vec , BERT etc. Experience in technologies like Azure, AWS, and advanced analytics concepts like Simulation, Deep Learning etc. are considered as a plus. Ability to meet deadlines for product deliverables in a timely, proactive, and entrepreneurial manner. General Management skills: Analytical and problem-solving skills to ideate. Excellent written and verbal communication skills; ability to discuss technical issues with peers, business stakeholders and senior management. Strong conceptual and creative problem-solving skills; ability to learn new and complex concepts quickly. Working Relationships Internal Contacts (And purpose of relationship): MetLife GTO Engineering, Digital Office and Global Data and analytics Business GOSC Leadership External Contacts (And purpose of relationship) - If Applicable Vendors Consultants

This position is expected to perform effective business delivery in Cloud and Integration platforms. Someone with minimal directions should be able to liaison with business, various technology partners and vendor partners to deliver high impact products and services. Looking for someone with good hands-on delivery experience in Azure cloud platforms, Systems integrations, Application development & maintenance. Someone who can drive strategic initiatives such as PoCs on AI, Application modernizations, Agile delivery model, Employee experience & Service integrations. Job Responsibilities Establish relationship with Business groups Analyze business problem statements Convert business requirements to technical specifications Design products & services Ability to participate actively and own technology solutions for BPR, legacy modernizations, AI, CRM, AI, cloud technologies Should have solution architecture mindset with ability to dive deep into applications components with keen eagerness to learn business workflows Contribute to budget estimations & manage financials Contribute to Talent development Manage delivery through Agile practices Setup capabilities: Azure cloud, AI, DevOps, App dev etc. Perform effective people management Contribute to Vendor management, Employee experience and Service integrations Drive culture of research & experimentation and contribute to Artificial Intelligence Should be able to attract, grow and retain engineering talent Actively demonstrates and promotes culture of working in a matrix organization focused on exceptional customer service through technology differentiation. Knowledge, Skills and Abilities Education Engineering degree and preferably advance degree in Technology domain Experience 18+ years of overall work experience with strong delivery management exposure in Agile environment Should have 10+ years experience in hands on development earlier in the career Should have demonstrated experience in large scale delivery in global setting Knowledge and skills (general and technical) Service delivery: Application development Other Requirements (licenses, certifications, specialized training - if required) Knowledge on Scale Agile & product management is preferred Working Relationships Internal Contacts (and purpose of relationship): MetLife partners External Contacts (and purpose of relationship) - If Applicable Vendor partners

Role & responsibilities Preparation of Techno Commercial Proposals with Cost estimation. Preparation of Mass balance, process flow diagram, Tentative plant layout & basic PID. Preparation Motor list, chemical list w.r.t. proposals. Preparation Operating cost w.r.t. offers. Attending techno-commercial negotiations with Client / consultants. Analyzing the enquiry received from Client & making complete techno commercial proposals. Review of work order/ purchase order received from client. Exposure in STP / ETP / RO / UF & waste water treatment plants proposal. Capable to handle a basic design in water & waste water treatment plant and review the designs prepared by the drafting team. Visit the site & attend the technical meeting along with sales team as and when required. Preferred candidate profile Should be from WTP, ETP, RO, UF, STP Perks and benefits Best in the industry

Clearance of finished good in SAP as per OQC plan and maintain daily reports/records/MIS Rejecting and returning non-conforming materials to production department for rework/final rejects. Maintain documents of Inspection, reworks, AQL, defects trends analysis Maintain safe and healthy work environment by following defined standards and procedures. Regular feedback to production department about NCs observed and ensure their closures. Issue of SLN (Stop line note) in case of producing non-conformance materials or not following defined SOPs, and control plan and their closures. Handle internal and external CCRs and their closure as per defined SLAs. Ensure CAPA effectiveness for all the complaints by regular audits. Support production and process department in improvement of quality or cost reduction projects. Prepare samples for any new customers along with test reports. Maintaining limit samples for all type of defects Benchmarking of cells specifications with other cells in market Clearance of FG in SAP as per SLAs. Coordinate for PDI for customer at shop floor/FG store Cell tester calibration and repeatability including the yearly cell calibration from international labs such as ISE/IFSH. Prepare samples for reliability tests like PID/LID/Rip-Off/Soldering peel test or any other test as per IEC certification. Internal and external audits for IMS Cell measurement like printing profile/cell thickness/Bow measurements etc. as per defined MQPs.

Job responsibilities: Lead the preparation of process engineering documents such Mass and Energy balance, Equipment list, Specification of equipment, PFDs P&IDs & functional descriptions for appointed projects. Familiar with line sizing calculations, Heat Exchanger sizing Line, Pressure Drop Calculation Lead the preparation of Static process data sheet, Inst process data sheet, Generate or Prepare RFQs or Enquiry Spec for bought out equipment Review engineering drawings, analyse design and retrieve information to complete drawing, layout or design along with Process designer. In cooperation with the project manager and lead engineers organize and execute the process engineering activities for appointed projects incl. specification of components and instruments Detailed design of the P&ID / Systems based on the general process design Clarify process strategy and requirements with BID owner and customer. Participate in external meetings with customers to discuss/clarify process issues and engineering activities Participate in commissioning & performance tests and assist in troubleshooting. Support BD /Proposal team in submission of proposal to proposed client. Candidate Profile: Graduate Engineer in Chemical Engineering or Equivalent with 6 years and above relevant experience in Process Engineering of EPC company in Alcohol, Brewery, Oil, Gas and Petrochemical Industry. Only candidates having EPC background need to apply.

Position Summary: As Project Engineer, this job describes in supporting the project team regarding to develop Process flow sheets/ piping instrumentation diagrams in COMOS tool. Work You ll Do: Drafting of PFDs and/or PIDs in CAE system COMOS or with CAD system AutoCAD . Implementation of changes in PFDs, PIDs or related documents. Data input and management within the CAE-system (database system COMOS ) Technical specifications of machines and apparatuses for inquiry and order Execution and co-ordination of changes within the dedicated tasks Preparation of necessary component documentations and the respective, general plant documentation (lists, descriptions, plans, Datasheets etc. ) Team: The person defined shall provide the technical support within the Project Team. The tasks of the Project Engineer within a project team include : Issue of Process Flow Sheets (PFD) and/ or Piping and Instrument Diagrams (PID) Issue of Plant listings and related data exploration and input to CAE tool. Support of project team in data input/ extraction of data into/ from CAE system COMOS. Issue of data sheets for specification of parts as compressors, blowers, heat exchangers, special machines, shut-off- and safety valves, etc. Documentation of technical equipment and engineering activities in sales orders Basic Qualifications: Engineering Degree in Mechanical / Mechatronics / Chemical with 2-5 years of experiences . Preferred Qualifications : Essential skill and Experience: Completed technical studies or educated technician. Basic knowledge of process technology Experience with CAD tools helpful (COMOS/AutoCAD) Experience in order handling within the plant engineering industry, especially for the processing industry helpful Interested in application of IT-systems/ database-systems. Good English skills in reading. Technical understanding Solution-oriented Flexible Communicative Team player

Dear Candidate, Greeting from ExxonMobil! Please copy and paste the below link into your browser to apply for the position in the company website. Link to apply: https://jobs.exxonmobil.com/job-invite/80146/ ExxonMobil is organizing scheduled in-person interviews at Mumbai on 26th and 27th April for Project Management roles. Work Location: Bengaluru (Last date to apply is 20th April 2025) Note: Shortlisted candidates will receive an interview invitation letter from recruiting team Please find below JD. What you will do Primary Job Functions The Process Engineering team will be responsible for the following: Concept Selection and Optimization: Executing Facility Concept Selection and Pre-FEED Capable of leading capital project development or design efforts through the company Capital Project System Leading or as part of an integrated team, develop scope definition for various facility concepts and analyzing/recommending results to maximize business value. Ensure full alignment of recommended scope with Business Teams, Manufacturing Site/Operations, Process Technology Specialists and Engineering Specialists providing design input to cost estimating models. Develop required deliverables: Process Simulation models, Equipment Lists, Flow Diagrams (Block, Process, Utility), Piping and Instrumentation Diagrams (P&IDs), Equipment Data Sheets, Layouts, Design Philosophies, Heat & Material Balances, Design Basis documentation, Optimization/Cost Reduction studies, Benchmarking facility design against previous projects / operating facilities. Provide mentoring, oversight and perform technical reviews of the work of less experienced process designers, ensuring delivery of quality and capital efficiency while meeting schedule requirements. Providing Engineering Surveillance of Facilities/Process Engineering deliverables required for FEED and Detailed Design/EPC execution. Ensuring compliance with job specification, design methods and safety factors are correctly applied in the design. •Providing operability reviews for startup, normal, turndown, and shutdown modes. Establishing design basis for abnormal operating conditions Development and review of Process Flow Diagrams (PFDs), heat and material balances (H&MBs), Piping and Instrumentation Diagrams (P&IDs) for process safety and operability considerations. Selection and specification of process and process control components Participate/lead design reviews, Risk Assessments, HAZOPs, vendor bid evaluations, and project readiness reviews. Development of the schedule, recommended deliverables, and labor hour estimate for process engineering. Measurement and reporting of physical progress. Participate in planning and work allocation process for the process design discipline. Develop planning documentation for internal company reviews for funding recommendations. About You Skills and Qualifications Bachelors degree or higher in Chemical Engineering, with GPA 6.5 or above Minimum of 5 years of process engineering experience in the oil and gas industry Technical Experience in oil and gas production facilities or Refining and Chemical facilities, including operating, technical support, or design experience in one or more of the following process areas: Conventional Onshore and Offshore Oil and Gas LNG (Regasification and Liquefaction) Sour Oil and Gas Treatment NGL recovery Produced Water Treatment Associated Utilities and Safety Systems Refining Processes Chemical Processes Hydrogen generation Carbon sequestration Familiarity with the selection and application of process and utilities systems in the process areas listed above Familiarity with safety aspects in design (API 14C/J recommended practices, relief and blowdown, passive and active fire protection, etc.) Ability to design new process equipment and rate existing process equipment to determine if it is suitable for modified operating parameters. Working capabilities in some of the following programs and data flows between them: AspenTech Engineering Suite including HYSYS, Aspen Basic Engineering, Aspen Capital Cost Estimator Siemens COMOS AVEVA Engineering Suite (Front End Engineering through 3D Modeling) Intergraph / Hexagon Engineering Suite PRO-II Other similar types of commercially available engineering suites Non-Technical A highly motivated team player with excellent oral and written communication skills Ability to build successful working relationships in a virtual environment Displays cultural sensitivity within the context of a multicultural and globally distributed team Proficient in Microsoft Office suite of software programs Strong organizational, planning/coordination, interface, and technical judgment skills. Ability to effectively self-priorities activities and demonstrate personal flexibility within the team environment to achieve the business objective Ability to interface with non-Engineering disciplines to achieve common objectives Ability to work both independently and collaboratively Willing and able to travel internationally as required. Thanks, Anita.

Job Summary: We're seeking a skilled Electrical & Instrumentation Engineer from water/ water treatement industry to contribute to our team. This role focuses on the design, development, and maintenance of electrical and instrumentation systems, requiring a practical approach and problem-solving abilities. Responsibilities: Develop and interpret P&IDs and instrumentation diagrams. Design and develop electrical control systems (power distribution, machine control, embedded controllers, sensors, communication networks). Create electrical schematics and wiring diagrams using CAD. Design control rooms, perform load calculations, and troubleshoot E&I systems. Program and test automation software/hardware (PLCs, SCADA, HMI), managing large I/O systems. Maintain and troubleshoot existing electrical/automation systems, performing repairs and upgrades. Execute projects at various sites, meeting client requirements. Collaborate with teams and stakeholders. Research and implement new technologies for system improvement. Qualifications: Familiarity with P&IDs and instrumentation diagrams. Bachelor's degree in Electrical/Instrumentation Engineering or related field. 5+ years of relevant experience. Strong knowledge of PLC programming and SCADA/HMI. CAD proficiency for electrical schematics. Experience with control room design, load calculations, and E&I troubleshooting. Excellent problem-solving and communication skills. Ability to work independently and in teams.

Responsibilities in the Job The role incumbent is responsible for working in team of technical services for technology absorption of the new plants coming up at DCTL, reviewing data packages and providing input to support smooth startup during commissioning. Ensuring preparation/review of the schemes/ technical support for the smooth operation of the existing plant and to prepare/review the technical schemes against the improvement ideas of various plants at DCTL; Monitoring the success of the schemes implemented. The activities performed by the incumbent include: Responsibility: 1. Absorbing the New Plants Technology coming up at DCTL in terms of BEP absorption & assisting Head/Lead TSD for changes, if any, to ensure smooth commissioning. 2. Preparation of scheme (PD, PFD, PID, PDS/IPDS etc.) for improvement initiatives in existing and upcoming plant/product. 3. Data collation for DCTL on EC/ CTE/ CCA, from data integrity viewpoint. Monitoring and analysis of data and providing input for compliance. 4. Reviewing/ Preparation of the schemes for the Plant/ Process/ Equipment performance improvements. 5. Provide/ update the SOPs for any new change in process or equipment operation. 6. Preparation of capex proposals on savings and payback period for new modifications in the plant to improve operating convenience in the plant. 7. Supporting operation team for Management of Change (MOC) by providing schemes with complete technical backup. 8. Ideation, detailing and implementation of continual improvement in QCDSE (Quality, Cost, Delivery, Safety & Environment). 9. Evaluating existing production norms and proposal preparation for meeting and improving norms. The above description is a general statement of required major duties and responsibilities performed on a regular and continuous basis. It does not exclude other duties as assigned. Functional | Technical Knowledge Required for this Role : Knowledge of chemical processes and unit operations including batch and continuous. Basic process calculations e.g. Equipment sizing, line sizing. Preparation of energy and mass balance calculations. Knowledge of Excel, word & AutoCAD software. Process, SOPs and Critical parameters. Knowledge of HAZOP, HIRA and QEMS. Knowledge of ASPEN and HTRI / EDR tools is preferrable. Practical experience for preparation and reviewing of PD, PFD, PID, PDS & IPDS. Technical knowledge on treatment of effluents. Educational Qualification | Experience (in years) | Exposure Required: B Tech Chemical with 3-7 years of experience in Chemical process in technical services/ Process engineering/ technology transfer/Design.

Job Title: Proposal Engineer (WTP) Function / Department: Process Proposal About Wipro Water Wipro Water is a Business Unit of Wipro Infrastructure Engineering (a division of Wipro Enterprises Ltd) headquartered in Mumbai. Wipro Water offers Complete Solutions in Water Waste Water Treatment, OM, Desalination, Sustainability Consulting, Recycle Reuse, Sludge Treatment and Source Analysis. Website: www.wiprowater.in Desired Candidate Profile: Qualifications: Desired Experience: Yrs of Exp / Nature of Exp Diploma / BE ( Chemical/Mechanical) BSC 3-5 YEARS in water industry Key Skills Required: Areas of expertise / skills Knowledge of PT, DM, UF, RO plant Worked in process proposal department for WTP Have good experience of WTP plant scheme selections estimations Good communication skills with vendors clients. Target Companies: Ion exchange/ Thermax/VAtech WABAG/ Pennar/ Aquatech Position Details Key Accountabilities: List the key areas of responsibility Preparation of techno commercial offer for WTP Recycle plants. Do estimation of WTP plants. Preparation of basic engineering package for WTP like PID, HFD, Sizing calculations Attend the technical meetings with client/consultant. Reporting: Mention reporting relationships Head - Process Proposal Work Location Airoli, Navi Mumbai

Job Responsibilities 1. Knowledge of handling control panels, reading wiring diagrams and understanding control logic. 2. PLC wiring and IO loop testing / troubleshooting 3. Knowledge and use of sensors, PID Controllers, panel instruments. 4. Parameter settings on VFDs, Controllers, HMI, panel instruments. 5. Understanding of instrumentation P&ID diagrams, knowledge of sizes and working experience on pipe fittings, tubing, adaptors, ball valves. 6. Replacement of panel parts and testing panels as per functionalities, interlocks. 7. Wire termination, cable laying and soldering wires/connectors/parts. 8. Installing PC applications, configuration, Using PC hardware, 9. Uploading PLC and HMI program thru PC application 10. Calibration of PID controllers/ Indicators and sensors. 11. calibration of instruments like Temp Sensor, pressure Sensor Etc. 12. electrical knowledge of Motor, MCB, Contractor, Relays or other electrical components used in electrical panel. 13. knowledge of trouble shooting chemical and pharma equipment control panel.

ITB, Stress, CSA, design review of 3-D models,SP3D/E3D/CAD Worx Modeling Software knowledge for Piping module, Equipment module, Drawings & Reports and Hangers & Support module Required Candidate profile Project management exp, Agile, Water fall, MS Project, Primavera) and CAD/CAE software. PMP, Six Sigma is a plus, Leadership, Strategic thinker, Exp in large-scale, complex projects

About Stem Stem (NYSE: STEM) is a global leader in AI-enabled software and services that enable its customers to plan, deploy, and operate clean energy assets. The company offers a complete set of solutions that transform how solar and energy storage projects are developed, built, and operated, including an integrated suite of software and edge products, and full lifecycle services from a team of leading experts. More than 16,000 global customers rely on Stem to maximize the value of their clean energy projects and portfolios. Learn more at http://www.stem.com Stem s culture embodies diversity inclusion beyond the traditional facets of gender, ethnicity, age, disabilities, and sexual orientation to include experience, personality, communication, workstyles, and more. At our core, Stem is at the momentous intersection of clean energy and software technology where diverse ideas, experiences, and professional skills converge to make the inclusive culture we have today. Together, we are turning old school thoughts about software and energy into progressive, collaborative, and innovative solutions. By joining our team, you will be collaborating with data scientists, energy experts, skilled salespeople, thought-leading executives and more from a range of backgrounds. This intersection of ideas, beliefs, and skills is what makes us unique enough to lead the world s largest network of digitally connected energy storage systems. Responsibilitie s: Identifies customer goals , analyzes plant design documents, and implements project s to requirements. Design , construct , and integrate Power Plant Control (PPC) implementations along with Data Acquisition Systems (DAS) SCADA for C I (Commercial and Industrial ) and Utility renewable generation systems. Manages and own s development efforts around STEM s PowerManager and PowerTrack SaaS platforms. Conducts and documents testing including Bench Testing, FAT, and SAT. Develops, integrates, and supports new processes, products, and standardizations. Provides appropriate and timely technical advice on matters relating to PPC, DAS, SCADA. Assist customers, Stem s Support Team, Field Service Teams in solv ing technical issues . Support s plant commissioning activities with occasional travel to critical sites as needed . Independently manage s project pipelines and stakeholder expectations. Other duties as assigned . Required Qualifications: Bachelors degree in engineering with a minimum of 5 years of relevant experience or 8+ years of revenant experience in lieu of a degree. 5+ years of experience with the following: C ontrols engineering experience in one of the following industries: renewable power generation, fossil power generation, power distribution, or battery storage. U tilizing PLCs for DAS and closed-loop control integration. D esigning , tuning, and troubleshooting PI and PID loops. Industrial SCADA/EMS platforms including Inductive Automation s Ignition Platform. Experience with SQL databases. Knowledge of the following communication protocols: Modbus, DNP3, OPC, IEC-60870, FTP. Competency in the following programming languages: Python, C#, Visual Basic , IEC-61131 Experience integrating layer 2/3 networking hardware and topologies and serial communications. Solid understanding Power Plant Control modes and electrical grid stability conditions and variables. Experience with systematic design, tuning, and troubleshooting of complex control systems . Ability to communicate technical information clearly and concisely to non-SMEs. In this customer - facing role you m ust be collaborative with strong listening and problem - solving skills . Preferred Qualification s: Knowledge of SEL or Phoenix platforms is a plus. Familiarity with VMware and/or Hyper-V virtualization i s a plus. Knowledge of cybersecurity best-practices and requirements (NERC-CIP) is a plus. Stem, Inc. is an equal opportunity employer committed to diversity in the workplace and does not discriminate against any employee or applicant for employment because of race, color, sex, pregnancy, religion, national origin, ethnicity, citizenship, sexual orientation, gender identity, age, marital status, disability, genetic information, military status, protected veteran status or any other factor protected by applicable federal, state or local laws.

Description Enphase Energy is a global energy technology company and leading provider of solar, battery, and electric vehicle charging products. Founded in 2006, Enphase transformed the solar industry with our revolutionary microinverter technology, which turns sunlight into a safe, reliable, resilient, and scalable source of energy to power our lives. Today, the Enphase Energy System helps people make, use, save, and sell their own power. Enphase is also one of the fastest growing and innovative clean energy companies in the world, with approximately 80 million products installed across more than 160 countries. We are building teams that are designing, developing, and manufacturing next-generation energy technologies and our work environment is fast-paced, fun and full of exciting new projects. If you are passionate about advancing a more sustainable future, this is the perfect time to join Enphase! About the role: As a Staff Firmware Engineer in System Business unit, you will be part of a cutting-edge team that focuses on designing and developing firmware for new generation of energy (battery) storage, smart switch to provide complete energy management solution for residential and small commercial applications. You will be working from Enphase office in Bangalore and interface closely with cross functional teams across multiple sites. What you will do Design and implement embedded firmware on an RTOS and/or bare-metal environment for energy storage and energy management products using C++/C Work with the marketing, hardware, and systems teams to specify the requirements and behaviour of new products Design and implement algorithms and state machines for smart switch products. Quickly learn about and adapt existing code and architectures into custom applications Carry design tasks from concept to implementation Work with cross functional teams to test and troubleshoot issues Self-motivated individual with the ability to work under minimal supervision Who you are and what you bring BE/B.Tech/M.S/M.Tech/PhD in Electronics / Computer Science / Electrical Engineering Bachelors with 8+ years/ Masters with 6+ years of hands-on experience in firmware development and debugging in ARM based microcontrollers . Experience in developing firmware for products from concept to production. Good understanding of C++/C programming, data structures, design patterns, oops, RTOS concepts and microcontroller internals Good written and verbal communication skills Understanding of diagnostics, logging, and event-driven systems Understanding of Hard Real-Time bare-metal development Experience in working on large embedded systems with communication interfaces desired. Familiarity with with functional safety analysis, or control theory (such as PLLs, PID, distributed control, stability analysis) desired. Familiarity with development tools such as Git, Keil, GCC, JTAG, Make, etc. Ability to test code and hardware both with and without external test equipment such as oscilloscopes, power meters, etc. Ability to document engineering requirements, document solutions, and test new firmware designs. Familiarity with functional safety analysis and strong electrical engineering fundamentals STM32 Cortex-M family development experience Mbed OS, Zephyr development experience is nice to have.