317 Pid Jobs

Roles and responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary desi...

Experienced Life Science / Biopharma Design Engineer proficient in P&ID development and 3D modelling for process skids and plant piping systems. The ideal candidate will combine technical expertise with practical knowledge of Life science/biotech facility design requirements. Experience Level: 5-15 years Qualification: Bachelor's degree in Mechanical, or related Engineering field Key Responsibilities: Create and review Process and Instrumentation Diagrams (P&IDs) following industry standards and GMP requirements. Develop 3D models for process skids and plant piping systems using industry-standard software (e.g., AutoCAD Plant 3D, REVIT). Coordinate with multi-disciplinary teams including pro...

You have an exciting opportunity to join a leading professional services consulting firm, WSP, as a C&I Engineer specializing in Detailed Design Engineering for Desalination/Power Plants and other sectors. As part of the team, you will be responsible for the following minimum services: - Monitor, control, and execute project design and review activities within schedule and budget constraints. - Coordinate with internal engineers to deliver project outputs as per schedule. - Interact with clients to understand and fulfill their requirements. - Ensure all deliverables comply with project and client requirements, maintaining high quality standards. In addition to the above responsibilities, you...

We are looking for a UAV Engineer with at least 3 years of hands-on experience in R&D, UAV integration, and testing. The role requires someone who understands UAV avionics in depth, can configure and assemble systems, perform structured testing, and independently solve system-level problems during development. The engineer must be capable of completing specific testing objectives defined by the technical lead, gathering and analyzing data, and driving issues to resolution. Key Responsibilities : Assemble and integrate UAV systems including avionics, propulsion, sensors, and payloads. Perform flight tests as per defined objectives and report outcomes clearly. Analyze flight logs and telemetry...

Job Title: Head Embedded System Engineer Department: Engineering R&D / Product Engineering Industry: Medical Devices / Healthcare Technology Reporting to: Head of Engineering / CTO Employment Type: Full Time, Permanent Experience : 10+ Years Job Summary: We are looking for a detail-oriented Embedded Systems Engineer with expertise in designing and developing Hardware and firmware for high-voltage power electronic systems. The ideal candidate will have experience interfacing with analog and digital components in high voltage environments and a strong understanding of real-time control for power conversion, safety, and monitoring functions. Key Responsibilities: Develop embedded Hardware firmw...

Job Requirements Knowledge on Instrumentation and Control drawings such as P&ID & PFD, Instrument data sheet, Process Instrument and Junction box layout, DCS, Wiring, Instrument Loop diagram, Logic diagram, Knowledge in Design and detail engineering including preparation of data sheet, specification for control panels Knowledge in Panel design, Electrical load list, Equipment list and IO list and instrumentation index Knowledge in Instrumentation design and detail engineering documents, Drawing preparation, calculation, cable schedule and procurement Work Experience 5+ yrs of experience Experience in oil and Gas industry with control and instrumentation design Good knowledge on international...

Design and detail engineering of wastewater treatment , Effluent Treatment , Biogas, Compressed Biogas projects , preparation of Request for Proposal , Evaluation of techno-commercial proposal for equipment Experience in Biogas , Compressed Biogas , Wastewater treatment , Effluent Treatment , Sewage treatment Rewards on milestone achievements

PLC and HMI programming (AB, Honeywell, Siemens)PID control and Control ValvesIT knowledge Data Structure and networkingSCADA programming and designBoiler operation Instrumentation, Interlocks, Safety, Sequence for start and stop of Boiler

Job Title - Process Engineer Department- Process engineering Qualification - BE or ME in Mechanical / Chemical engg. Experience- 3 to 8 years Roles and Responsibilities: Thermal design of Boiler / Heater in respective software. Sizing of Fans, Pumps, Burners, dampers, ducts, piping, safety valves, Preparing Specifications and review offer for fans, pumps, burners, dampers, auxiliaries Proposal and contract stage P&ID, PFD, GA, datasheet preparation Read Tender Specification and prepare clarifications and deviations. Note budget points. Prepare Bill of materials for purpose of budgeting Prepare instrumentation data for control valves, pressure, temperature and flow instruments. Basic understa...

PLC and HMI programming (AB, Honeywell, Siemens) PID control and Control Valves IT knowledge Data Structure and networking SCADA programming and design.

Responsibilities in the Job The role incumbent is responsible for working in team of technical services for technology absorption of the new plants coming up at DCTL, reviewing data packages and providing input to support smooth startup during commissioning. Ensuring preparation/review of the schemes/ technical support for the smooth operation of the existing plant and to prepare/review the technical schemes against the improvement ideas of various plants at DCTL; Monitoring the success of the schemes implemented. The activities performed by the incumbent include: Responsibility: 1. Absorbing the New Plants Technology coming up at DCTL in terms of BEP absorption & assisting Head/Lead TSD for...

The role incumbent is responsible for working in team of technical services for technology absorption of the new plants coming up at DCTL, reviewing data packages and providing input to support smooth startup during commissioning. Ensuring preparation/review of the schemes/ technical support for the smooth operation of the existing plant and to prepare/review the technical schemes against the improvement ideas of various plants at DCTL; Monitoring the success of the schemes implemented. The activities performed by the incumbent include: Responsibility: 1. Absorbing the New Plants Technology coming up at DCTL in terms of BEP absorption & assisting Head/Lead TSD for changes, if any, to ensure ...

As a Senior Piping Engineer at McDermott, your role involves using best practices and expertise to enhance the Piping discipline within the organization. You will serve as a valuable resource for colleagues, providing guidance and sharing your knowledge related to Piping. Your responsibilities will include solving complex problems, improving products and services, and ensuring compliance with guidelines and policies. Key Responsibilities: - Perform conceptual, FEED, or detailed design analysis according to project requirements, design codes, and standards - Lead Engineering team on small projects - Prepare detailed design calculations, reports, and procedures - Manage time effectively to mee...

Note:- Candidate from Erection, Maintenance, Commissioning, Installation DO NOT APPLY Essential Experience A Bachelor of Engineering in Mechanical / Marine or relevant degree from recognized university / college. Piping Engineer with10-15 years of experience in Piping P&ID design, Pipe routing and Isometrics for offshore Rig & Drill Ship. Piping engineer should be an expert in Drilling & Marine piping system such as Low- & High-pressure mud, BOP, Choke & Kill, Mud gas separator, Burner boom, Brine, Base oil, Ballast water management, Bilge, Fire, Fuel oil, Lube oil, FW/SW Cooling, Deluge, Hydraulic, Pneumatic etc. Flow & pressure drop calculations, Equipment / Pump selection, Pipe material s...

1 Process design engineering (Basic, detailing & Improvement) 2 Preparation of Material balance, PFDs, heat balance and capacity calculations for product.

Job Title: Senior Engineer - Instrumentation & Controls Job Description Your responsibilities: Should have experience in researching and selecting components within a scope, including IO components, motor controllers, eFuses, etc. In PLC hardware engineering, you'll design, install, and maintain the physical components like controllers and I/O modules. You'll troubleshoot hardware issues, configure networks, and ensure the system functions flawlessly to control industrial processes. Developing Graphics in PLC HMI systems based on P&IDs and graphic specifications Tools: Beckhoff PLC Experience is must Mandatory Skills: Smart Plant Instrumentation, Autodesk AutoCAD, InstruCalc, Instrumentation

Must to have exp. in handle Project independently, Prepare PFDs, P&IDs, & Plant layouts for new projects, Prepare Mass Balance, Energy Balance, Prepare CAPEX and ensure No cost escalation. Pump hydraulic calculations, Detailed engineering work.

1.Preparation of Block Chart, PFD, P&ID, ULD 2.Process calculation, Mass Balance, Energy Balance 3.Equipment sizing & Selection 4.Knowledge of Dist Column 5.PDS sheet preparation 6 Knowledge of HAZOP, Safe Wrong practices in chemical industries

Job Purpose Plan and deliver on key engineering and process development for mechanical equipment s and systems for strip processing lines that enable to achieve operational excellence and support the growth objectives of the organisation. Key Result Areas Development and sustenance of engineering equipments, processes and systems Meeting the targets around Quality, Delivery and Cost Innovation mindset to bring in new designs to improve functionality and reduce cost. Lead and plan engineering activities for the team. Key Responsibilities Understand the technical contract requirements and develop basic and detailed design for the same. Lead team of engineers and draftsmen to carry out engineer...

Location: Chennai, Tamil Nadu, India Job ID: R0105631 Date Posted: 2025-09-09 Company Name: HITACHI ENERGY TECHNOLOGY SERVICES PRIVATE LIMITED Profession (Job Category): Engineering & Science Job Schedule: Full time Remote: No Job Description: The opportunity Work as CAD designer, assisting Project / Senior engineers in cooling system projects. From 3D-models create 2D-drawings for manufacturing, assembly and for submittal to customer for approval. Drawings will be reviewed by the Project /Senior engineer prior to submittal to the customer and production. Assist in CAD-component changes and conversion from supplier inputs.Work will be executed in 3D CAD software Solid Edge. How you ll make a...

Role & responsibilities : Process Engineering of New Products / New Processes / Process Improvements / Retrofitting into Multipurpose Plants based on Technology Dozier (and / or) LDR. Process Design of Equipment's, Instruments, Mechanical Items etc. to Develop Design Specifications, Preparation of PDS / IPDS / SIDS, Review of MDS & vendor Drawings etc. Developing & Reviewing the PFDs, P&IDs, Layouts with global engineering standards. Leading the process engineering & design inputs for project execution, pre-commissioning and commissioning of new plants / new products in existing retrofitted plants. Should have Process Design and Basic Engineering Package (BEP) Preparation experience. Candida...

The Tool & Die Engineering (TDE) division of Automation Engineering (ATE) is seeking a qualified individual to join our team in Gurgaon. The ideal candidate should have a BE / B. Tech in Mechanical, Chemical, Automation, or equivalent from a premier institute, along with an M Tech in energy, chemical, biogas technology, or biomass technology. With 5 to 8 years of experience, you will be responsible for the following key responsibilities: - Designing PID for biogas to CBG conversion. - Conceptualization, Costing, Calculations, Analysis, Designing, Parts selection, Process enhancement/improvement, Manufacturing process for related equipment, Preparation and checking of HMB/ P&ID. - Proficiency...

The ideal candidate should have a minimum of 4 years of experience in designing complete instrument drawings, P&IDs, cabling, data sheets, I/O wiring diagrams, schematics, and specifications. You will be responsible for developing control system architecture, selecting PLC hardware, designing and validating ECU switching boxes, selecting switchgear and cables, and preparing detailed BOMs. Additionally, knowledge in HVAC (Heating, Ventilation, and Air Conditioning) is required for this position. To qualify for this role, you must hold a Bachelor's degree in Instrumentation & Controls Engineering or Electrical & Electronics Engineering.,

Roles & Responsibilities System Design & Integration Architect embedded control systems for robotics and automation platforms Integrate servo motors, sensors, actuators, and drive systems into cohesive units Firmware & Software Development Develop and optimize embedded firmware (C/C++/Python) for real-time control Implement communication protocols (CAN, SPI, I2C, UART, Modbus) Drive & Motion Control Design and tune motor control algorithms (PID, FOC, sensor less control) Configure and troubleshoot VFDs, servo drives, and stepper motor controllers Testing & Validation Conduct system-level testing, debugging, and performance validation Use oscilloscopes, logic analyzers, and simulation tools f...

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivity's Manufacturing and Process Development Engineering Teams significantly impact LEANPD driven new product development projects, driving for excellence in existing manufacturing technologies and methods and striving to implement new manufacturing technologies to provide improved process and tolerance control. They act as the binding element between product development and manufacturing engineering, ensuring the effectiveness and efficiency of this critical interface. They support Product Development in the optim...