70 Pic Jobs

1 Exp 5 to 7years 2 Hardware is already present and needs to write the firmware based on requirements 3 Embedded Firmware engineer with C & bare metal programming knowledge 4 Hands on with Interfaces such as UART, SPI, I2C etc 5 Experience in Integration of stacks as needed Mandatory a IDE: Microchip studio, MPLab IDE X, VS Code. STM32Cube b Microcontrollers: ESP32, ATSAMD21, any other Atmel Cortex M0, STM32, uBlox modules c Version control: Git d Communication protocol: DALI-2 (preferred), BLE Mesh

Job description Role & responsibilities 1. Able to identify raw materials and co-relate traceability with mill certificates. 2. Able to witness laboratory tests (Mechanical, Chemical, Hardness etc.) 3. Able to inspect Groove Welding as well as Fillet Welding thoroughly. Conversant with all welding gauges & instruments. 4. Able to check individual structures (segment of shell, columns, beams , bracings, girders) 5. Able to Check Leveling, Control Assembly Dimension of Structures , Shells etc. 6. Inspector should have minimum NDT Level-II and able to witness VT, PT, MT, UT & RT respectively. 7. Able to check welding procedure & qualification records. Preferred candidate profile 1. Should be able to make photo report of daily / weekly progress and well conversant in MS Office (especially MS Excel Word). 2. Should be conversant with monitoring progress through progress line on schedule bar chart. 3. Should be young and energetic (Age - between 30 to 45 Years preferably). 4. Daily & Weekly Consolidated Reporting 5. Daily Report / Flash report to be submitted at the end of the day / latest within next days morning. weekly report to be submitted by end of each week. 6. All the reports / information to be shared with PIC without fail. 7. All the discussions / deviations / planning between Inspector / Expeditor and Vendor should be shared with PIC for concurrence. 8. Any deviations / anomalies observed to be discussed with PIC and decision to be conveyed after concurrence. Perks and benefits Perks and benefits as per the industry standards

Job Description: You will be responsible for designing Analogue Circuit & digital Hardware, conducting Circuit simulation on spice, Concept prototyping & testing, Packaging, and final prototyping. Additionally, you will handle EMI-EMC Design documentation, verification & validation. Key Responsibilities: - Hands-on experience in Design & Development of P based Instrumentation Equipments, preferably in Level, Flow & Pressure - Work with STM, ARM, PIC, MSP & Atmel Micro-controllers - Proficiency in AVRstudio, MPLAB, CCS/CCE & STMCUBE IDEs - Familiarity with Altium, AutoCAD, and Ms Office Qualifications Required: - BE / M.Sc in Electronics / Instrumentation / Computer - 8 to 10 years of relevant experience,

As a part of our team at a young company specializing in Electronics Design, Consultancy, and Training, you will have the opportunity to work on Electronics Development projects for OEMs from concept to completion. We collaborate closely with global R&D leaders, providing exposure to cutting-edge technology across various domains such as Control Electronics, Electric Vehicles, Medical Instrumentation, and more. **Key Responsibilities:** - Develop firmware based on PIC, AVR, STMicroelectronics, TI Core Microcontrollers. - Design schematics and circuits, and create test cases and project modules. - Test, debug, and procure components for systems. - Prepare working manuals, training materials, and technical documentation. **Qualifications Required:** - Ability to work both independently and collaboratively. - Experience in Automotive, IoT, EV systems is preferred. - Strong documentation and writing skills for project documentation. - Proficiency in networking concepts, Linux, and Windows programming. - Willingness to travel for project deployment/testing. - Strong interpersonal and communication skills in English. - Integrity, passion, and problem-solving skills are essential. In addition to the responsibilities and qualifications, it is important to note that candidates with experience limited to Arduino/NodeMCU/ESP32 development profiles are not suitable for this position. **Education:** - UG or PG in Electronics/Telecommunication, Comp. Sc., or Diploma in related fields. **Experience:** - Minimum of 3 years in a Development role. **Other Benefits:** - Work with industry standards and guidance. - International Project Certification from UK assessment agency. - Social, health, and intellectual security benefits. - Opportunity to present research papers and earn patents. This is a full-time, permanent position with benefits such as cell phone reimbursement, commuter assistance, flexible schedule, health insurance, internet reimbursement, leave encashment, and work-from-home options. The schedule is day shift with performance bonuses, shift allowance, and yearly bonuses available. Ability to commute/relocate to Ghaziabad, Uttar Pradesh is preferred. Bachelor's degree is preferred for education qualifications. The work location is in person. Please submit samples of previous work, such as project references, working project videos, or project documentation during the application process.,

Roles & Responsibilities System Design & Integration Architect embedded control systems for robotics and automation platforms Integrate servo motors, sensors, actuators, and drive systems into cohesive units Firmware & Software Development Develop and optimize embedded firmware (C/C++/Python) for real-time control Implement communication protocols (CAN, SPI, I2C, UART, Modbus) Drive & Motion Control Design and tune motor control algorithms (PID, FOC, sensor less control) Configure and troubleshoot VFDs, servo drives, and stepper motor controllers Testing & Validation Conduct system-level testing, debugging, and performance validation Use oscilloscopes, logic analyzers, and simulation tools for diagnostics Project Leadership Lead cross-functional teams in product development cycles Collaborate with mechanical, software, and manufacturing teams Documentation & Compliance Maintain technical documentation, schematics, and BOMs Ensure compliance with safety standards (IEC, ISO, CE) Technical Skill Embedded Systems - Microcontrollers (ARM, STM32, PIC), RTOS, Embedded C/C++. Motor Control - Servo motors, stepper motors, BLDC, VFDs, encoder feedback. Drive Systems - Drive tuning, motion profiles, torque/speed control. Hardware Design - PCB design (Altium, Eagle), analog/digital circuit design. Protocols - CAN, RS-485, SPI, I2C, Ethernet, Modbus. Tools - MATLAB/Simulink, LabVIEW, KiCad, JTAG, Logic Analyzer. Simulation & Modeling - Multisim, LTspice, Simulink for control system modeling. Core Skillsets Control Systems Engineering - Deep understanding of control theory, feedback systems, and stability analysis. Embedded Firmware Development - Efficient coding practices for low-power, real-time systems. System Integration - Ability to merge hardware, firmware, and mechanical components seamlessly. Troubleshooting & Debugging - Strong analytical skills to isolate and resolve complex system issues.

As an embedded systems trainer, you will be responsible for delivering advanced training sessions covering a wide range of topics. These topics include advanced C programming, C++ programming, Autosar, Python programming, GUI development, ARM7, ARM CORTEX, PIC, AVR Atmega, communication protocols, real world interfacing, single board computers, Embedded AI with TinyML and EDGE AI, RTOS, Embedded networking, IOT, Embedded Linux and device drivers, robotics, and PCB designing. This is a full-time, permanent position suitable for fresher candidates. The work location is in person, allowing for direct interaction with the employer. Additionally, you will be entitled to internet reimbursement as part of the benefits package. If you are passionate about embedded systems and have a deep understanding of the mentioned topics, this role offers a great opportunity to share your knowledge and expertise with others. Get in touch with the employer at +91 9567999282 to learn more about this exciting opportunity.,

As an Embedded Firmware Engineer, you will be responsible for designing, developing, testing, and maintaining firmware for microcontroller-based products. Your role will involve working on firmware architecture, optimization, and feature enhancements, as well as implementing and troubleshooting communication protocols such as CAN, SPI, IC, and UART. You will be expected to write modular, maintainable, and efficient C and C++ code while collaborating with hardware engineers to validate designs and resolve firmware issues using tools like logic analyzers, oscilloscopes, and debuggers. Additionally, you will contribute to the continuous improvement of development processes and document firmware design, test procedures, and user guidelines. To excel in this role, you should possess a B-tech / B.E. degree in Electronics, Electrical, Computer Science, or a related field, along with at least 4 years of hands-on experience in embedded firmware development. You must have a strong proficiency in C and C++ programming languages, with a deep understanding of data types, memory models, structures, unions, conditional statements, functions, pointers, and memory management. Experience with microcontroller programming (ARM, PIC, STM32, etc.) and communication protocols (CAN, SPI, IC, UART) is essential, as well as familiarity with embedded development environments, debuggers, and version control systems like Git. Preferred qualifications for this role include experience with Real-Time Operating Systems (RTOS) such as FreeRTOS, RTX, or ThreadX, as well as knowledge in medical device firmware development, low-power firmware design, and embedded security concepts and bootloaders. Soft skills such as strong analytical and problem-solving abilities, excellent communication and documentation skills, the ability to work both independently and in a team, and strong time management and attention to detail will also be beneficial in this position.,

About The Role RoleEmbedded Developer Choose Capgemini Reimagine the Possible Choosing Capgemini means choosing a company where you are empowered to shape your career your way. Youll be supported and inspired by a collaborative global community, and you"ll help leading organizations unlock the value of technology to build a more sustainable and inclusive world. Capgemini is looking for Embedded Developers for our fortune assignements for Thane location on C1 grade (6 to 9 years) mandate. We are looking for:: Experience6 to 9 Years Work locationOnly for Mumbai (Thane) Mandate Skills: Embedded C , RTOS , Driver development is plus , WiFi / BLE/ ZigBee/IOT Product , Module coding and integration skills. About Capgemini Capgemini is a global leader in business and technology transformation, helping organizations accelerate growth and sustainability. With over 340,000 team members in more than 50 countries , Capgemini combines deep industry expertise with cutting-edge technologies to deliver impactful solutions. The company is deeply committed to inclusion and diversity , backed by a 55-year heritage. It delivers end-to-end solutions from strategy and design to managing operations, fueled by the fast-evolving and innovative world of cloud, data, AI, connectivity, software, digital engineering, and platforms . The Group reported in 2022 global revenues of 22 billion . Get The Future You Want |www.capgemini.com About The Role - Grade Specific RoleEmbedded Developer Choose Capgemini Reimagine the Possible Choosing Capgemini means choosing a company where you are empowered to shape your career your way. Youll be supported and inspired by a collaborative global community, and you"ll help leading organizations unlock the value of technology to build a more sustainable and inclusive world. Capgemini is looking for Embedded Developers for our fortune assignements for Thane location on C1 grade (6 to 9 years) mandate. We are looking for:: Experience6 to 9 Years Work locationOnly for Mumbai (Thane) Mandate Skills: Embedded C , RTOS , Driver development is plus , WiFi / BLE/ ZigBee/IOT Product , Module coding and integration skills. About Capgemini Capgemini is a global leader in business and technology transformation, helping organizations accelerate growth and sustainability. With over 340,000 team members in more than 50 countries , Capgemini combines deep industry expertise with cutting-edge technologies to deliver impactful solutions. The company is deeply committed to inclusion and diversity , backed by a 55-year heritage. It delivers end-to-end solutions from strategy and design to managing operations, fueled by the fast-evolving and innovative world of cloud, data, AI, connectivity, software, digital engineering, and platforms . The Group reported in 2022 global revenues of 22 billion . Get The Future You Want |www.capgemini.com

About The Role Project Role : Silicon Firmware & Embedded Engineer Project Role Description : Write the software that powers and operates a silicon chip. Develop pre-silicon firmware and software with a direct interface to hardware. Integrate and develop C tests/APIs and software build flow. Perform design and code reviews. Test and validate product implementations. Must have skills : Embedded C Good to have skills : NA Minimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Silicon Firmware & Embedded Engineer, you will be responsible for writing the software that powers and operates a silicon chip. Your role involves developing pre-silicon firmware and software with a direct interface to hardware, integrating and developing C tests/APIs and software build flow, performing design and code reviews, and testing and validating product implementations. Roles & Responsibilities:- Expected to perform independently and become an SME.- Required active participation/contribution in team discussions.- Contribute in providing solutions to work related problems.- Develop and write pre-silicon firmware for silicon chips.- Integrate and develop C tests/APIs for hardware interface.- Conduct design and code reviews for software implementations.- Test and validate product implementations for quality assurance.- Collaborate with cross-functional teams to ensure project success. Professional & Technical Skills: - Must To Have Skills: Proficiency in Embedded C.- Strong understanding of hardware-software interface.- Experience with software build flow and testing methodologies.- Hands-on experience in developing firmware for silicon chips.- Knowledge of C tests/APIs integration.- Familiarity with design and code review processes. Additional Information:- The candidate should have a minimum of 3 years of experience in Embedded C.- This position is based at our Bengaluru office.- A 15 years full time education is required. Qualification 15 years full time education

Job Summary Embedded Engineer Location : Hyderabad & Pune Exp: 6-10 yrs Responsibilities Strong proficiency in Embedded C programming Work experience with using tools like CANoe, Compilers IAR, Code composer and debuggers Skilled in embedded driver development, including ADC, UART, SPI, I2C, CAN, and LIN Experience in UAL and EA design Proficient in version control systems such as GIT and SVN Experience RTOS Good to have Automotive experience

As a highly skilled Senior Embedded Developer based in Mumbai, you will be responsible for designing, developing, and optimizing embedded systems for real-time applications. Your expertise in microcontrollers, real-time operating systems (RTOS), communication protocols, and low-level firmware development will play a crucial role in ensuring the seamless integration and high performance of embedded solutions. Your key responsibilities will include developing and optimizing embedded systems, working with microcontrollers and microprocessors, writing and optimizing firmware for real-time applications, and developing and maintaining real-time embedded systems. You will also collaborate with hardware engineers, implement interrupt-driven programming, utilize timers and counters, develop applications using Real-Time Operating Systems (RTOS), implement communication protocols, optimize performance, debug and troubleshoot systems, maintain technical documentation, and participate in peer code reviews. Additionally, you will guide junior developers, contribute technical expertise to project planning and execution, and work on PCB design and development. To be successful in this role, you should possess a Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field, along with at least 5 years of experience in embedded systems development. Strong proficiency in C, C++, and familiarity with assembly or Python is required, as well as hands-on experience with microcontrollers and processors such as ARM Cortex, STM32, PIC, AVR, or similar platforms. Experience with RTOS like FreeRTOS, Zephyr, or embedded Linux, proficiency in debugging tools, knowledge of networking and connectivity protocols, and familiarity with version control tools are also essential. Strong analytical and troubleshooting skills, as well as experience with Python, databases, frameworks, and React, are desired qualifications. Preferred qualifications for this role include experience in automotive, IoT, medical devices, or industrial automation industries, familiarity with FPGA, DSP programming, or cybersecurity in embedded systems, and knowledge of Agile/Scrum development methodologies.,

As an intern at Rapid Techs, you will have the opportunity to work on cutting-edge technology projects. Your day-to-day responsibilities will include tasks such as working on microprocessors and microcontrollers, engaging in embedded firmware and hardware development, providing software and hardware training on platforms like Arduino, PIC, ARM, and Raspberry Pi, as well as working on projects related to wireless communication and IoT. Rapid Techs is a dynamic organization that focuses on the development of industrial and academic research across various technology streams. We are known for our expertise in providing industrial solutions and innovative academic programs. Join us to be a part of an exciting and forward-thinking team that is dedicated to pushing the boundaries of technology.,

We are hiring for the role of Field Application Engineer: ROLE AND RESPONSIBILITIES Design and develop embedded systems with a minimum of 3 years of experience in Industrial or Automotive applications. Strong knowledge of 8-bit, 16-bit, and 32-bit Microcontrollers/Microprocessors, with hands-on experience on Cortex-M architecture. Familiarity with Linux OS is an added advantage. Expertise in hardware design including component selection, schematic designing, and debugging. Deep understanding of customer applications at the detailed block level. Proficient in programming with C or C++. Experience with embedded software tools from NXP, PIC, RENESAS, or ST. Basic understanding of EMI/EMC, power supply design, interface circuits, and analog components. Basic knowledge of wireless communication protocols such as BLE, Wi-Fi, Zigbee, and RF products. Strong communication and presentation skills to effectively liaise with customers and internal teams. QUALIFICATIONS AND EDUCATION REQUIREMENTS Bachelors degree in Engineering (B.E/B.Tech) with a minimum of 3 years of relevant industry experience. Excellent planning and organizational skills. Proficiency in MS Office tools. Clear and articulate communication skills in English, both written and verbal. High level of integrity, initiative, and self-motivation.

We are hiring for the role of Field Application Engineer: ROLE AND RESPONSIBILITIES Design and develop embedded systems with a minimum of 3 years of experience in Industrial or Automotive applications. Strong knowledge of 8-bit, 16-bit, and 32-bit Microcontrollers/Microprocessors, with hands-on experience on Cortex-M architecture. Familiarity with Linux OS is an added advantage. Expertise in hardware design including component selection, schematic designing, and debugging. Deep understanding of customer applications at the detailed block level. Proficient in programming with C or C++. Experience with embedded software tools from NXP, PIC, RENESAS, or ST. Basic understanding of EMI/EMC, power supply design, interface circuits, and analog components. Basic knowledge of wireless communication protocols such as BLE, Wi-Fi, Zigbee, and RF products. Strong communication and presentation skills to effectively liaise with customers and internal teams. QUALIFICATIONS AND EDUCATION REQUIREMENTS Bachelors degree in Engineering (B.E/B.Tech) with a minimum of 3 years of relevant industry experience. Excellent planning and organizational skills. Proficiency in MS Office tools. Clear and articulate communication skills in English, both written and verbal. High level of integrity, initiative, and self-motivation.

As an Embedded Systems Hardware and Software Development Manager at Atlas Copco's Global Engineering Center in India, you will play a crucial role in leading and overseeing projects related to product controllers and smart solutions. Your mission is to drive innovation, technical competence, and operational excellence within the Embedded Systems teams to position GECIA as the preferred technology partner. Your responsibilities will encompass customer focus, people management, innovation, and operational excellence. In terms of customer focus, you will anticipate and address customer needs, enhance satisfaction levels, and maintain proactive communication with stakeholders. You will also establish effective governance mechanisms to track project progress and business engagement activities. People focus is essential as you recruit, train, mentor, and develop talent within the team. Your leadership will foster a culture of collaboration, innovation, team success, and customer satisfaction. Additionally, you will drive employee engagement and high performance. Innovation is a key aspect of your role, where you will stay updated on industry trends, drive a culture of innovation within the team, and promote cross-pollination of technologies. Leveraging internal and external forums, you will develop infrastructure and partnerships for impactful innovative solutions. Operational excellence will be another focus area, where you will monitor and improve quality, delivery, and cost parameters. You will lead the team to ensure high project billability, profitability, and revenue realization. To excel in this role, you should have a minimum of 10 years of experience in Embedded Systems, with people management experience being essential. Proficiency in embedded system architecture, programming languages, real-time operating systems, microcontrollers, communication protocols, project management, and quality assurance is required. Familiarity with agile development methodologies and a degree in Electrical Engineering or Computer Science are desirable qualifications. In return, Atlas Copco offers you an opportunity to work with a leading global product company, empowering you to drive your professional journey. You will be challenged to create a center of competence for Embedded Systems, with global exposure, autonomy, and a supportive culture that values diversity and inclusivity. Join us on this journey towards a better tomorrow at Atlas Copco's Global Engineering Center in Pune. The last day to apply for this exciting opportunity is 16-06-2025. Embrace the culture where diverse perspectives are valued, and together, we innovate and build a meaningful sense of purpose and belonging.,

Job Description We are seeking a skilled Electronics Design Engineer to contribute to the development and implementation of advanced electronic systems. This role involves working with digital logic technologies such as FPGAs and ASICs, designing and verifying integrated circuits (ICs) and printed circuit boards (PCBs), and innovating methods for efficient electrical power usage and electronic equipment design. The ideal candidate will have a strong foundation in electronic engineering principles and hands-on experience with hardware design tools and simulation environments. Responsibilities: Design, simulate, and implement digital logic using FPGA and ASIC technologies. Develop and verify layouts for ICs and PCBs using industry-standard tools. Collaborate with cross-functional teams to integrate electronic systems into larger platforms. Conduct testing, debugging, and validation of electronic components and systems. Optimize power usage and performance of electronic equipment. Document design processes, test results, and technical specifications. Primary Skills: Proficiency in VHDL/Verilog for FPGA/ASIC development. Experience with PCB design tools (e.g., Altium Designer, Cadence, Mentor Graphics). Knowledge of IC design and verification methodologies. Strong understanding of electronic circuits and power systems. Secondary Skills: Familiarity with embedded systems and microcontroller programming (e.g., ARM, PIC). Experience with simulation tools (e.g., SPICE, ModelSim). Basic understanding of signal integrity and thermal analysis. Good communication and teamwork skills. Educational Qualification: Bachelor's or Master's degree in Electronics Engineering, Electrical Engineering, or a related field.

Roles & Responsibility : Train students/professionals in Embedded Systems, Microcontrollers (ARM, PIC, AVR, Arduino, Raspberry Pi, ESP32) , and their integration with AI/ML applications . Provide guidance on mini and major projects related to IoT. Provide hands-on sessions using tools like Python, R, or MATLAB Prior training/mentoring experience is a plus. Stay updated with emerging AI trends and incorporate them into training modules. Required Skills: AI/ML/NLP: Strong conceptual understanding of Artificial Intelligence, Machine Learning, and NLP. Python, R, C, or C++.

Position: Embedded Engineer Candidate Skill: Technical Skills C, C++, Assembly, RTOS, Bare-Metal Programming, SPI, I2C, UART, Microcontrollers, ARM, PIC, AVR, TCP/IP, CAN, Modbus, Embedded Linux, Yocto, Bluetooth, Wi-Fi, Zigbee, Git, Debugging Tools Experience: 4+ Years Job Description: We are seeking an enthusiastic and skilled Embedded Engineer to join our team The ideal candidate will have a strong foundation in embedded systems development and a passion for creating high-performance software for embedded devices As an Embedded Engineer, you will be working on innovative and challenging projects that require a deep understanding of hardware-software integration Key Responsibilities: Design, develop, and maintain embedded systems software across a variety of platforms Work closely with hardware engineers to integrate hardware and software for seamless functionality Develop and optimize device drivers, firmware, and embedded software for performance and reliability Write clean, maintainable, and efficient code for embedded applications Conduct thorough testing and debugging of embedded systems to ensure they meet functional and performance requirements Collaborate with cross-functional teams to design, develop, and deliver robust embedded solutions Analyze and optimize embedded systems for power consumption, memory usage, and speed Stay current with emerging embedded technologies and best practices Requirements: 3+ years of experience in embedded systems development Strong knowledge of programming languages such as C, C++, and Assembly Experience with RTOS (Real-Time Operating Systems) and bare-metal programming Familiarity with hardware interfaces (SPI, I2C, UART, etc) and peripheral integration Hands-on experience with microcontrollers and microprocessors (eg., ARM, PIC, AVR, etc) Experience with debugging tools (e.g., oscilloscopes, logic analyzers) and embedded development environments Knowledge of communication protocols (e.g., TCP/IP, CAN, Modbus) Strong understanding of embedded system design and development processes Excellent problem-solving skills and ability to work in a team environment Technical Skills: C, C++, Assembly, RTOS, Bare-Metal Programming, SPI, I2C, UART, Microcontrollers, ARM, PIC, AVR, TCP/IP, CAN, Modbus, Embedded Linux, Yocto, Bluetooth, Wi-Fi, Zigbee, Git, Debugging Tools Location - Bengaluru,Noida,Pune,Mumbai,Hyderabad,Mohali,Panchkula,Chennai

Roles 1Embedded Exp on various cores like ARM,AVR,PIC with 3rd party libraries &API's using c/c++. 2Flutter Designing android app onTV&mobile,workon bug fixing&AndroidSDK in Flutter,kotlin& java 3 c&c++ developer Design build & maintain C/C++ code Required Candidate profile Candidate belongs to Meerut working outstation or open to relocate,NeedJr&Sr Developers with related Exp'ce Embedded(lifecycle),flutter(Android devel't),C+C++programming with trends&EmergingTechnolg's

We are seeking a dedicated Test Engineer with 1 to 2 years of experience to join our dynamic team. As a Test Engineer, you will play a crucial role in ensuring the quality and reliability of our products. Your responsibilities will include: Testing & Verification: Conducting thorough testing and verifying the functionality, reliability, and performance of hardware and software systems. Defect Diagnosis: Identifying, diagnosing, and documenting defects in the products, ensuring they are resolved before market release. Test Automation: Implementing and enhancing automated testing strategies within standard testing frameworks. Collaboration: Working closely with design and development teams to create efficient test plans and methodologies. Continuous Improvement: Identifying areas for improvement in product quality and testing processes. Responsibilities: The required technical skillset for an Embedded Hardware Test Engineer includes: Programming Languages: Proficiency in languages such as Embedded C and C++ is essential for testing and validating interface for embedded systems . Microcontroller Knowledge: Understanding various microcontrollers (e.g., ARM, PIC, AVR) and their operations . Debugging: Strong debugging skills for identifying, analyzing, and resolving hardware-related issues . Testing Methods & Tools: Familiarity with embedded system testing methods and tools such as oscilloscopes, logic analyzers, and software-based testing . Test Automation: Ability to develop and execute automated tests to improve efficiency and accuracy of hardware testing. Real-Time Operating Systems (RTOS): Knowledge of RTOS for handling time-critical tasks in embedded systems . Signal Processing & Communication Protocols: Understanding signal processing techniques and communication protocols like I2C, SPI, UART, and CAN for embedded hardware testing.

Role Purpose The purpose of the role is to resolve, maintain and manage clients software/ hardware/ network based on the service requests raised from the end-user as per the defined SLAs ensuring client satisfaction Do Ensure timely response of all the tickets raised by the client end user Service requests solutioning by maintaining quality parameters Act as a custodian of clients network/ server/ system/ storage/ platform/ infrastructure and other equipments to keep track of each of their proper functioning and upkeep Keep a check on the number of tickets raised (dial home/ email/ chat/ IMS), ensuring right solutioning as per the defined resolution timeframe Perform root cause analysis of the tickets raised and create an action plan to resolve the problem to ensure right client satisfaction Provide an acceptance and immediate resolution to the high priority tickets/ service Installing and configuring software/ hardware requirements based on service requests 100% adherence to timeliness as per the priority of each issue, to manage client expectations and ensure zero escalations Provide application/ user access as per client requirements and requests to ensure timely solutioning Track all the tickets from acceptance to resolution stage as per the resolution time defined by the customer Maintain timely backup of important data/ logs and management resources to ensure the solution is of acceptable quality to maintain client satisfaction Coordinate with on-site team for complex problem resolution and ensure timely client servicing Review the log which Chat BOTS gather and ensure all the service requests/ issues are resolved in a timely manner Mandatory Skills: TIS Service Desk. Experience: 1-3 Years.

Role Purpose The purpose of the role is to resolve, maintain and manage clients software/ hardware/ network based on the service requests raised from the end-user as per the defined SLAs ensuring client satisfaction Do Ensure timely response of all the tickets raised by the client end user Service requests solutioning by maintaining quality parameters Act as a custodian of clients network/ server/ system/ storage/ platform/ infrastructure and other equipments to keep track of each of their proper functioning and upkeep Keep a check on the number of tickets raised (dial home/ email/ chat/ IMS), ensuring right solutioning as per the defined resolution timeframe Perform root cause analysis of the tickets raised and create an action plan to resolve the problem to ensure right client satisfaction Provide an acceptance and immediate resolution to the high priority tickets/ service Installing and configuring software/ hardware requirements based on service requests 100% adherence to timeliness as per the priority of each issue, to manage client expectations and ensure zero escalations Provide application/ user access as per client requirements and requests to ensure timely solutioning Track all the tickets from acceptance to resolution stage as per the resolution time defined by the customer Maintain timely backup of important data/ logs and management resources to ensure the solution is of acceptable quality to maintain client satisfaction Coordinate with on-site team for complex problem resolution and ensure timely client servicing Review the log which Chat BOTS gather and ensure all the service requests/ issues are resolved in a timely manner Mandatory Skills: TIS Service Desk. Experience: 3-5 Years.

Having experience in Engineering design, Installation, testing & Commissioning of industrial plants & equipment's comprising of instrumentation like Pressure, Temperature & Flow switches / transmitters etc. LT / PLC/MCC Control Panels etc.

Role Purpose The purpose of the role is to resolve, maintain and manage clients software/ hardware/ network based on the service requests raised from the end-user as per the defined SLAs ensuring client satisfaction Do Ensure timely response of all the tickets raised by the client end user Service requests solutioning by maintaining quality parameters Act as a custodian of clients network/ server/ system/ storage/ platform/ infrastructure and other equipments to keep track of each of their proper functioning and upkeep Keep a check on the number of tickets raised (dial home/ email/ chat/ IMS), ensuring right solutioning as per the defined resolution timeframe Perform root cause analysis of the tickets raised and create an action plan to resolve the problem to ensure right client satisfaction Provide an acceptance and immediate resolution to the high priority tickets/ service Installing and configuring software/ hardware requirements based on service requests 100% adherence to timeliness as per the priority of each issue, to manage client expectations and ensure zero escalations Provide application/ user access as per client requirements and requests to ensure timely solutioning Track all the tickets from acceptance to resolution stage as per the resolution time defined by the customer Maintain timely backup of important data/ logs and management resources to ensure the solution is of acceptable quality to maintain client satisfaction Coordinate with on-site team for complex problem resolution and ensure timely client servicing Review the log which Chat BOTS gather and ensure all the service requests/ issues are resolved in a timely manner Mandatory Skills: TIS Service Desk.

Role Purpose The purpose of the role is to resolve, maintain and manage clients software/ hardware/ network based on the service requests raised from the end-user as per the defined SLAs ensuring client satisfaction Do Ensure timely response of all the tickets raised by the client end user Service requests solutioning by maintaining quality parameters Act as a custodian of clients network/ server/ system/ storage/ platform/ infrastructure and other equipments to keep track of each of their proper functioning and upkeep Keep a check on the number of tickets raised (dial home/ email/ chat/ IMS), ensuring right solutioning as per the defined resolution timeframe Perform root cause analysis of the tickets raised and create an action plan to resolve the problem to ensure right client satisfaction Provide an acceptance and immediate resolution to the high priority tickets/ service Installing and configuring software/ hardware requirements based on service requests 100% adherence to timeliness as per the priority of each issue, to manage client expectations and ensure zero escalations Provide application/ user access as per client requirements and requests to ensure timely solutioning Track all the tickets from acceptance to resolution stage as per the resolution time defined by the customer Maintain timely backup of important data/ logs and management resources to ensure the solution is of acceptable quality to maintain client satisfaction Coordinate with on-site team for complex problem resolution and ensure timely client servicing Review the log which Chat BOTS gather and ensure all the service requests/ issues are resolved in a timely manner Mandatory Skills: TIS Service Desk.Experience: 3-5 Years.