65 Phe Jobs - Page 2

Electrical systems-lighting, panels, DBs, cabling, and safety checks. HVAC systems-split units, air handling units, and exhaust fans. Ensure operational readiness and safety compliance of utility systems like DG, elevators & fire-fighting equipment.

Position Summary We are seeking an experienced Site Plumbing Engineer (PHE) to oversee the execution and installation of plumbing, water supply, drainage, and fire protection systems for high-rise building construction projects. This is a field-based role requiring daily presence at construction sites to ensure plumbing work is executed according to design specifications, safety standards, and project timelines. The successful candidate will be responsible for on-site supervision, quality control, and coordination of plumbing contractors during the construction phase. Key Responsibilities On-Site Execution and Supervision Oversee daily plumbing installation activities across multiple floors of high-rise construction projects including water supply, drainage, and fire protection systems Supervise plumbing contractors and subcontractors to ensure work quality meets project specifications and industry standards Conduct regular inspections of rough-in plumbing, pipe installations, fixture mounting, and system connections Coordinate plumbing work with other trades including electrical, HVAC, and structural teams to avoid conflicts and ensure proper routing Ensure proper installation sequencing and adherence to construction schedules for complex multi-story plumbing systems Quality Control and Testing Perform field inspections and testing of plumbing installations including water pressure tests, drainage flow tests, and system leak detection Verify proper installation of plumbing fixtures, pipe runs, pumps, water heaters, and pressure boosting systems Conduct hydrostatic testing, air testing, and flow testing of plumbing systems before handover to commissioning teams Monitor installation of fire sprinkler systems, standpipe systems, and fire pumps according to NFPA standards Identify and resolve installation defects, non-conformances, and quality issues in real-time Maintain detailed inspection reports and quality control documentation Safety Management and Compliance Enforce plumbing safety protocols and procedures on construction sites, particularly for high-rise work environments Conduct safety briefings for plumbing crews and ensure compliance with OSHA regulations and company safety standards Monitor and approve plumbing work in confined spaces, elevated areas, and around heavy machinery Coordinate with safety officers to investigate and resolve plumbing-related safety incidents Ensure proper handling and installation of hazardous materials and chemicals used in plumbing systems Technical Problem-Solving Resolve field installation challenges and provide technical solutions for unexpected site conditions Coordinate with design engineers to address field changes, design modifications, and value engineering opportunities Review shop drawings and submittal documents from plumbing contractors for compliance with project specifications Troubleshoot plumbing system issues during installation and pre-commissioning phases Interface with local water utilities and municipal authorities for service connections and inspections Manage water pressure zones and booster pump installations for high-rise water distribution systems Required Qualifications Bachelor's degree in Mechanical Engineering, Plumbing Engineering, or related field Experience Requirements 5-10 years of progressive experience in plumbing engineering with specific focus on construction execution for high-rise buildings or large-scale construction projects Contact: - Pranay.g@sattvagroup.in / srinivasamurthy.s@sattvagroup.in - Contact No: 9620218409 / 9606451600

Hello Candidate, Greetings from Hungry Bird IT Consulting Services Pvt. Ltd.! We're hiring a Fire Fighting Design Engineer for our client. Job Title: Fire Fighting Design Engineer Location: Hyderabad Qualification: BTech Civil Engineering, Construction Management, or related field Experience: Job Summary: We are seeking a qualified and experienced Fire & PHE Engineer to join our team. The ideal candidate will be responsible for the design, installation, and maintenance of fire protection systems and public health engineering systems, including water supply, drainage, and sanitation facilities. The role will require a strong understanding of fire safety regulations, plumbing systems, waste management, and the ability to work collaboratively in multidisciplinary teams. Key Responsibilities: Fire Protection Engineering: Design and implement fire protection systems, including fire alarms, sprinkler systems, fire suppression, and emergency evacuation plans. Conduct fire risk assessments and ensure compliance with local and international fire safety codes and standards. Oversee the installation, testing, and maintenance of fire safety equipment. Collaborate with architects, engineers, and construction teams to ensure the proper integration of fire safety measures into building designs. Develop and maintain fire safety documentation, including plans, inspections, and compliance reports. Provide training and guidance to site personnel on fire safety procedures and emergency response protocols. Perform fire system inspections and audits, providing recommendations of improvements or upgrades. Public Health Engineering (PHE): Design and oversee the installation of public health systems, including potable water supply, sanitation, drainage, and waste disposal systems. Conduct site surveys and prepare reports on existing public health infrastructure. Design stormwater management systems and ensure compliance with environmental and health regulations. Monitor the operation and maintenance of PHE systems to ensure they meet required standards. Work closely with local authorities to ensure compliance with public health regulations and guidelines. Advice on sustainable practices for water conservation, waste treatment, and overall health and safety standards in facilities. Coordinate with project managers to ensure the timely delivery of PHE services for construction or renovation projects. (Interested candidates can share their CV to aradhana@hungrybird.in or call on 9959417171) Please furnish the below-mentioned details that would help us expedite the process. PLEASE MENTION THE RELEVANT POSITION IN THE SUBJECT LINE OF THE EMAIL. Example: KRISHNA, HR MANAGER, 7 YEARS, 20 DAYS NOTICE Name: Position applying for: Total experience: Notice period: Current Salary: Expected Salary: Thanks and Regards Aradhana +91 9959417171

Responsibilities: Design phe systems according to codes & standards Collaborate with engineers on project development Ensure compliance with safety regulations Drafting of plumbing and fire fighting system. Annual bonus

Job Title: Senior Design Engineer/Lead Design PHE & Fire Fighting Location: Bengaluru Experience Required: 614 Years (2–6 Years Gulf Design Experience Mandatory) Qualification: B.E / B.Tech in Mechanical Engineering We are seeking a Senior Design Engineer – PHE & Fire Fighting to join our dynamic team. The ideal candidate will be responsible for delivering high-quality plumbing and fire protection system designs across a range of commercial, residential, healthcare, retail, and high-rise projects. Key Responsibilities: Lead the planning, concept development, schematic, and detailed design of Plumbing (PHE) & Fire Fighting systems. Design plumbing systems including water supply, sewerage, drainage, medical gas, and LPG/NG systems with all necessary calculations and detailed layouts. Design and layout fire protection systems including sprinklers, hydrants (internal/external), fire pumps, and tanks, supported by hydraulic calculations using Elite software. Prepare designs and layouts for swimming pools and water features . Oversee and review the work of the design team to ensure quality, completeness, and accuracy. Independently manage design delivery or collaborate effectively as part of a multidisciplinary team. Allocate project resources, budgets, and man-hours efficiently. Ensure compliance with QA/QC procedures , engineering standards (national/international), and relevant authority guidelines. Utilize engineering tools including AutoCAD, Revit, Navisworks, BIM360, and MS Office . Key Skills: Strong technical expertise in plumbing and fire protection design. Proficient in relevant codes, standards, and Gulf region authority regulations. Excellent communication, coordination, and team leadership skills. Experience with BIM and digital design platforms. How to Apply: Interested candidates are invited to submit their resume and portfolio to prashanth.m@khatibalami.com

Dear Candidate, We have permanent Job opportunity for Mechanical Engineer (HVAC) Walk in drive on 28th and 29th June 2025 in bangalore location 3-6 years' experience in mechanical engineering within an MEP Consultancy environment. Workshare/ International project experience is preferred - Middle East / UK Experience in concept design to tender detailing Good understanding on the HVAC, PHE, FPS and system design related to Building environment Ability to accept a high degree of responsibility in a team-based organisation, combined with ability to work independently. Broad building design knowledge, from working on a wide range of projects. Excel skills (a detailed understanding including the use of macros). Although mechanically biased it is expected that you will have a good understanding of electrical concepts and their impact upon the overall project. Ideally also showing an awareness of other key design team members such as architects, structural and civil engineers. Knowledge of AutoCAD, Revit, IES, and Hevacomp software Bachelors degree in mechanical engineering from a reputed institute. Interested candidates may apply to nirmal.s@randstad India Pvt or please contact MR Nirmal 7401306667 Mail format - Application for Job role along with current location

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Duties and Responsibilities Works under limited supervision, demonstrating a high level of autonomy and decision-making ability. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Directs project support and production for assigned projects, creating drawings as required using established standards and content to meet job requirements (objects within the drawing, doors, lights, etc.). Leads the development and implementation of BIM strategies and workflows to optimize project efficiency and accuracy. Collaborates with cross-functional teams to ensure seamless integration of BIM models with other disciplines (structural, mechanical, electrical, etc.). Manages and maintains BIM libraries, ensuring up-to-date content and adherence to company standards. Conducts quality assurance checks on BIM models to ensure accuracy, completeness, and compliance with project requirements. Participates in client meetings to present BIM solutions and address technical queries. Stays current with industry trends and emerging technologies in BIM and Plant Data Centric design, recommending improvements to existing processes. Mentors junior designers, fostering their professional development and enhancing the team's overall BIM capabilities. Troubleshoots complex modeling issues and develops innovative solutions to overcome technical challenges. Contributes to the development of company-wide BIM standards and best practices. Assists in the preparation of project proposals and cost estimates related to BIM implementation. Qualifications Minimum Bachelor's degree in Architecture, Engineering, or related field + 6 years of relevant experience, or demonstrated equivalency of experience and/or education Proficiency in Revit, AutoCAD, and Navisworks Extensive knowledge of Building Information Modeling (BIM) principles and practices Strong understanding of PHE (Plumbing, Heating, and Electrical) systems and their integration in BIM Demonstrated experience in leading BIM projects and mentoring junior designers Knowledge of fire fighting systems including hydrant systems, sprinkler systems, fire zoning, fire extinguishers, and clean agent systems Proficiency in additional software such as Revizto and Microstation Certification in BIM (e.g., Autodesk BIM Specialist, BIM Level 2 Certification) Experience with Plant Data Centric design Strong problem-solving skills and ability to troubleshoot complex modeling issues Excellent communication and presentation skills for client interactions Knowledge of industry standards and best practices in BIM implementation Experience in developing BIM strategies and workflows to optimize project efficiency Additional Information

Execute plumbing works (water supply, drainage, sewage, rainwater); supervise contractors, manage materials, coordinate MEP teams, perform hydro testing, maintain DPRs. Skills: AutoCAD, pipe sizing, site coordination. Call Shraddha - 8750718221

Work with Us. Change the Word. At AECOM, we're deivering a better word. Whether improving your commute, keeping the ights on, providing access to cean water, or transforming skyines, our work heps peope and communities thrive. We are the word's trusted infrastructure consuting firm, partnering with cients to sove the word’s most compex chaenges and buid egacies for future generations. There has never been a better time to be at AECOM. With acceerating infrastructure investment wordwide, our services are in great demand. We invite you to bring your bod ideas and big dreams and become part of a goba team of over 50,000 panners, designers, engineers, scientists, digita innovators, program and construction managers and other professionas deivering projects that create a positive and tangibe impact around the word. We're one goba team driven by our common purpose to deiver a better word. Join us. Responsibe for engineering, design, and modification activities reated to mechanica equipment, vesses and tanks and piping systems incuding equipment and piping specifications and procurement. May be invoved with the support of instaation and operation & maintenance of equipment. Discipine concerning air conditioning, refrigeration, ventiation, combustion, heat transfer, energy, power, fues, propusion, machinery, toos, manufacturing, fuids, pumbing, fire suppression systems and devices, water suppies and pumping systems for fire protection. Discipine covers the abiity to sove probems that deiver and optimise safe, sustainabe and ethica soutions for the design, production and operation of devices, machines, structures, processes and systems invoving mechanica eements. Duties and Responsibiities Senior technica resource may serve as technica advisor for team Provides speciaized technica input to studies and design for staff's specific area of expertise. Deveops study and design procedures to faciitate high quaity cost effective work by others. Participates in interdiscipinary review of project deiverabes. Deveops construction cost estimates and estimates of technica efforts for projects. Uses expertise in a steps of competing discipine component of PS&E package. Performs quaity contro review of design cacuations or drawings. Prepares technica specification sections. Provides input to the deveopment of engineering budget and schedue to meet requirements. Quaifications BE in Mechanica Engineering. 10+ years of experience working in Mechanica Engineering design. Experience in the UK & UAE Buiding projects. To work for the design of the Heath Care, residentia, commercia, retai and hospitaity sectors. Experience in the design of the PHE. Provide technica expertise when appying pubic heath engineering principes, techniques and methods to the panning and design of buiding services projects. Experience in the design of Pubic Heath Engineering (Sanitary and stormwater drainage, cod and hot water domestic water suppy, gas storage and distribution systems, misceaneous piping services, etc.) Experience in software (IES, HAP, Trace, and Eite), MEP Revit, Exce, PowerPoint, and Word. Additiona Information

Job Description The selected candidate will be responsible for: - Preparation of Water supply layout/storm water design layout/drainage layout, Schematic drawings, statutory approval drawings & material take-off from PHE layouts Providing basic inputs for design calculations Coordination with other MEP and structural services Coordination with other BIM leads for uploading the models, Initiating workflows, Model conversions and effective clash resolving with MEP and other services, Work within time limits to complete deliverables on time Share knowledge and experience with junior staff in the section and to help develop junior staff Handle a team of Modellers independently with minimal supervision, Candidate Specification Diploma in Mechanical or equivalent in respective engineering discipline Possess 8 -10 years of experience in the field of PHE design as above Experience in modelling of plumbing & layout preparations, Schematic diagrams and preparation of BOQ Experience in relevant design software such as Auto CAD, REVIT, Navis work, Aecosim, microstation and IT Literacy Have good oral and written communication skills We Can Offer (subject To Companys Policy) Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmens compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute, Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments We embrace agility, flexibility and trust, Location(s): Bengaluru, KA, IN Contract Type: Permanent Work Pattern: Full Time Market: Buildings Discipline: Building services Job Ref: 6516 Recruiter Contact: Deiveegan

Project managers for interior construction projects will be responsible for the overall construction of the interior projects assigned. Project Managers must possess the knowledge and experience to engage and professionally interact with design professionals, consultants and clients. They will be responsible for the overall site management and successful direction and guidance of construction site personnel in planning, coordinating and safely executing work in accordance with the contract documents, schedules and budgets. The PM is required to attend regular meetings with clients and be well-versed in all aspects of work at the site. PMs should be capable of handling issues at site effectively and be able to take alternative decisions if site feasibility does not conform to approved plans. Role & responsibilities Site Analysis Should be able to handle preconstruction & construction phase. Preparation of pre-construction and construction schedules Review the project plans and drawings periodically and effectively communicate with the design team on the changes/modifications based on site conditions Assisting in procuring and assembling materials at site Site execution & PMC/Client handling Monitoring the project construction schedule on a weekly basis Monitoring team members depending on the role. Preparing and issuing minutes of all site meetings. Preparing and issuing weekly project reports. Ensuring that Q&A audits and monitoring of site safety, are maintained at all times. Ensuring requirements of health, safety & Environment of employees and workers are enforced as per company EHS policy & Objectives. Ensuring completion and tracking materials and all independent testing and inspections as required. Overall Project delivery and Design management Client and vendor management. Materials management and always Maintaining Inventories of all properties of the project. Change management, in the case of change of initial design ordered by client; The PM shall properly follow change management as per company policy and ensure that all documentation of PMC sign off and changes based on design updates at construction stage are maintained and strictly followed. 17. Proper documentation and handover documents/Commissioning reports of all jobs done/completed by the project manager or contractors should be maintained at all times Preferred candidate profile A Project Manager must have: 1. Experience from a Corporate interior/ commercial interior/ construction background is a must. 2. Must understand construction terms, scheduling and planning concepts. 3. Good at MEP HVAC Low side & High side works, Electrical, FAPA systems (Fire Alarm & Public Address), PHE, Sprinkler system, security system, BMS, AV & Networking. 4. EHS Knowledge 5. Proficiency in MS Office, MS projects and AutoCAD is preferred. 6. Excellent organizational, presentation and interpersonal skills. 7. Good communication, grooming, and time management and people management skills How youll grow : Your personal and professional development are important to us. As a company thats constantly redefining the boundaries of possibility, we’ll challenge you to push yourself, accelerate your ambitions and rise to the new level of excellence. As you connect with our visions, you’ll be rewarded with countless opportunities to experience new things and enhance your abilities. What you’ll get : Performance related Bonuses Insurance Benefits - Medical Insurance, Accidental Insurance, Life Insurance Parental Support - Maternity & Paternity Leaves. Retirement Benefits - Employee PF Contribution, Gratuity, Leave Encashment etc Various kinds of Leaves and it’s benefits Career focused technical and leadership training. Day Shift Qualifications: Degree/Diploma in Electrical/ Mechanical in the construction related field is preferable. About Us : At Symmetrics, we approach every new project with a vision unborrowed. We work unboxed by assumptions and past experiences and employ our creative abilities from the ground up - to build spaces that speak highly of an organization’s identity and culture. Whether it is a "blank slate" project which puts our imagination on overdrive or one with constraints and deadlines requiring attention-to-detail, we treat every project as an opportunity to raise the bar for ourselves. www.symmetrics.in

Roles & Responsibilities : 1. Design Review & Coordination Reviews MEP design drawings and documents for compliance with technical requirements, safety codes, and functional needs. 2. Quality & Technical Evaluation Assesses MEP material and equipment submittals for technical compliance. 3. Construction Monitoring Supervises on-site MEP installation work to ensure quality and adherence to schedule. Resolves technical queries and monitors daily progress. 4. Quality Assurance & Control Conducts inspections, snagging, and ensures rectification of defects. 5. Health, Safety, and Environmental (HSE) Compliance Ensures all MEP activities comply with safety regulations and HSE requirements on site. 6. Testing, Commissioning & Handover Monitors pre-commissioning and commissioning activities for all MEP systems. Ensures smooth handover with proper documentation, including O&M manuals, as-built drawings, and warranties. 7. Good Knowledge of MEP Site Activities Mechanical: HVAC, pumps, pressurization units, exhaust systems. Electrical: Power distribution, lighting, earthling, UPS, generators. Plumbing: Water supply, drainage, sewage treatment. Fire Fighting: Sprinkler systems, hydrants, fire pumps, extinguishers. ELV Systems: BMS, CCTV, access control, fire alarm, public address systems.

Role & responsibilities Candidate should have vast knowledge of basic, conceptual and detail designs. Performing calculations for pipe sizing, flow rates, pressure drops, and other relevant parameters to ensure efficient and safe system operation Ensuring all designs adhere to relevant plumbing codes, standards, and regulations, such as IPC, NFPA, and local building codes candidate should have good command on the REVIT software and detailing. Preferred expertise will be in Industrial Projects. Preferred candidate profile B.tech/M.tech (Mechanical) Experience - 10+ Years

ABOUT US Sanelac is a word synonym to trust when it comes to offering MEP (Mechanical, Electrical, Plumbing) solutions for your buildings. We are top-notch service providers in the areas of HVAC, Electrical, Fire Protection, Plumbing/ Sanitary, STP/WTP, IBMS, and Fire Detection. Our top benefiting clientele includes Hospitality Sector, Residential Sector, Industrial Sector, Commercial Sector, Institutions, Health Sector. Company Name - Sanelac Consultants Pvt Ltd Profile: - Plumbing & Firefighting Design Engineer Location:- 64/2, Okhla Phase II, Okhla Industrial Area , New Delhi - 110020 Experience : 10- 20 years Description 1. Produce concept design, Design Schematic, Design Development and Construction Design of plumbing and firefighting system as per architect layout, requirement of client and specification 2. Produce tender drawing of plumbing and firefighting system (waste, soil and rain water, sprinkler, hose reel and fire extinguisher system 3. Provide calculate note, if require 4. Prepare shop drawing for submission and resubmission (Plumbing, Fire Fighting System drawing) 5. Select and prepare some material for submission 6. Contact with supplier to request some quotation and technical documents, if require 7. Take off BOQ of firefighting and plumbing system (sprinkler head, pipe, sanitary fixture unit- ) 8. Prepared information regarding design, structure specification, material, equipment, estimated cost and construction time. 9. Consult with the Consultant to determine function and spatial requirement of MEP. 10. Coordinate closely with Electrical, Mechanical, Architect, Structure Team 11. Direct activities of workers engaged in preparing drawing and specification documents. Plan layout of project. 12. Prepared scale drawings 13. Collaborating with supervisor in preparing the technical report and installation on site. 14. Perform other duties as assigned 15. Prepare Project Schedule Design and Construction. 16. Prepare Progress Report, Daily Report, Weekly Report and Monthly Report. 17. Prepare Material List. 18. Prepare Costing for Biding.

Hi Everyone, I am on lookout for MEP PHE Engineer for leading MNC of engineers, designers and advisors. Please refer below JD and share your resume on pallavi.ag@peoplefy.com to expedite the process. Job description: For Engineer: 2 to 6 years of experience in PHE analysis & designing High-rise residential/commercial buildings (minimum 15 floors). Strong experience in designing MEP, PHE, Plumbing & Firefighting. Designing, Planning and detail Engineering of PHE systems. Designing of External sewage & Storm water drainage system. Preparation of water supply schematic, drainage schematic Excellent communication skills For Sr Engineer: 6 to 10 years of overall experience in PHE analysis & designing High-rise residential/commercial buildings (minimum 15 floors). Designing, Planning and detail Engineering of PHE systems. Strong experience in designing MEP, Plumbing & Firefighting. Team management and stakeholder management experience. Designing of External sewage & Storm water drainage system. Preparation of water supply schematic, drainage schematic Comfortable to travel as per business requirement. Excellent communication skills

Performs specific and limited portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with moderate supervision. Designs and develops plumbing systems for various building types, ensuring compliance with local codes and regulations. Calculates heating and cooling loads for HVAC system design. Collaborates with architects and other engineering disciplines to integrate PHE systems into overall building design. Prepares technical specifications and drawings for PHE systems using CAD software. Conducts site visits to assess existing conditions and gather necessary information for project planning. Participates in project meetings to discuss progress, challenges, and solutions related to PHE systems. Assists in the preparation of cost estimates and project schedules for PHE components. Stays current with industry trends, new technologies, and best practices in plumbing, heating, and engineering. Qualifications Qualifications: Bachelor's degree in Mechanical Engineering or related field; Master's degree preferred Minimum of 3-5 years of experience in plumbing, heating, and engineering (PHE) design for multi-use buildings Professional Engineer (PE) license or ability to obtain within 6 months of hiring Proficient in PHE & Fire services Design for Buildings (multi uses) Advanced knowledge of local and international building codes and regulations related to PHE systems Expert-level proficiency in Revit, AutoCAD, and Navisworks software Strong understanding of HVAC systems, including load calculations and energy efficiency principles Experience with Building Information Modeling (BIM) and 3D modeling techniques Familiarity with sustainable design practices and LEED certification processes Excellent problem-solving and analytical skills Strong communication and interpersonal abilities for collaborating with cross-functional teams Proven project management skills, including budgeting and scheduling Ability to perform site visits and assessments as needed Commitment to staying current with industry trends and emerging technologies in PHE systems

Duties and Responsibilities Works under limited supervision, demonstrating a high level of autonomy and decision-making ability. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Directs project support and production for assigned projects, creating drawings as required using established standards and content to meet job requirements (objects within the drawing, doors, lights, etc.). Leads the development and implementation of BIM strategies and workflows to optimize project efficiency and accuracy. Collaborates with cross-functional teams to ensure seamless integration of BIM models with other disciplines (structural, mechanical, electrical, etc.). Manages and maintains BIM libraries, ensuring up-to-date content and adherence to company standards. Conducts quality assurance checks on BIM models to ensure accuracy, completeness, and compliance with project requirements. Participates in client meetings to present BIM solutions and address technical queries. Stays current with industry trends and emerging technologies in BIM and Plant Data Centric design, recommending improvements to existing processes. Mentors junior designers, fostering their professional development and enhancing the team's overall BIM capabilities. Troubleshoots complex modeling issues and develops innovative solutions to overcome technical challenges. Contributes to the development of company-wide BIM standards and best practices. Assists in the preparation of project proposals and cost estimates related to BIM implementation. Qualifications Minimum Bachelor's degree in Architecture, Engineering, or related field + 6 years of relevant experience, or demonstrated equivalency of experience and/or education Proficiency in Revit, AutoCAD, and Navisworks Extensive knowledge of Building Information Modeling (BIM) principles and practices Strong understanding of PHE (Plumbing, Heating, and Electrical) systems and their integration in BIM Demonstrated experience in leading BIM projects and mentoring junior designers Knowledge of fire fighting systems including hydrant systems, sprinkler systems, fire zoning, fire extinguishers, and clean agent systems Proficiency in additional software such as Revizto and Microstation Certification in BIM (e.g., Autodesk BIM Specialist, BIM Level 2 Certification) Experience with Plant Data Centric design Strong problem-solving skills and ability to troubleshoot complex modeling issues Excellent communication and presentation skills for client interactions Knowledge of industry standards and best practices in BIM implementation Experience in developing BIM strategies and workflows to optimize project efficiency

Works under general direction with a high degree of autonomy. Responsible for providing leadership and direction of specific BIM technologies to assigned project teams, ensuring optimal utilization of resources and adherence to best practices. Develops technical solutions to a wide range of difficult problems, leveraging cutting-edge BIM methodologies and tools. Independently determines and develops approach to solutions, considering project constraints and client requirements. Performs complex assignments involving the use of multiple application platforms and complex systems including Revit software to achieve set results and deadlines. Collaborates with cross-functional teams to integrate BIM processes into overall project workflows, enhancing efficiency and accuracy. Mentors and trains junior team members on BIM technologies and best practices, fostering a culture of continuous learning and improvement. Conducts regular quality assurance checks on BIM models to ensure compliance with industry standards and client specifications. Participates in client meetings to present BIM strategies, address technical concerns, and provide expert advice on PHE (Plumbing, Heating, and Electrical) systems integration. Stays abreast of the latest developments in BIM technologies and PHE design, incorporating innovative solutions into project workflows. Develops and maintains BIM execution plans, ensuring alignment with project goals and timelines. Coordinates with external stakeholders, including contractors and suppliers, to ensure seamless integration of BIM models with construction processes. Contributes to the development of company-wide BIM standards and protocols, driving consistency and efficiency across projects. Analyzes and optimizes BIM processes to improve project delivery times and reduce costs. Prepares detailed reports on BIM implementation progress, challenges, and successes for senior management review. Qualifications Qualifications: Graduate degree in Mechanical Engineering or related field Minimum of 10-12 years of experience in PHE (Plumbing, Heating, and Electrical) design and BIM implementation Proficient in understanding and modelling PHE & Fire services design for buildings (multi uses) Expert-level knowledge of Revit, AutoCAD, and Navisworks Knowledge of other drafting and modelling software would be an advantage Demonstrated experience in leading BIM projects for large-scale commercial or industrial developments Strong understanding of UK building regulations and industry standards related to PHE systems Proven track record in developing and implementing BIM execution plans Excellent leadership and team management skills, with the ability to mentor junior staff Strong problem-solving skills and ability to develop innovative solutions for complex design challenges Proficiency in clash detection and coordination of multi-disciplinary BIM models Excellent communication skills, both written and verbal, with the ability to liaise effectively with clients, contractors, and internal teams Experience in sustainable design practices and energy-efficient PHE systems Familiarity with project management methodologies and tools Professional certification such as MCIBSE (Member of the Chartered Institution of Building Services Engineers) or equivalent is highly desirable

Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Designs and optimizes plumbing, heating, and ventilation systems for various types of buildings and structures. Conducts energy efficiency analyses and proposes improvements to existing PHE systems. Collaborates with architects, structural engineers, and other professionals to ensure integrated design solutions. Develops and maintains project schedules, ensuring timely completion of PHE design deliverables. Mentors junior engineers and provides technical guidance on complex PHE design issues. Participates in client meetings to present design concepts and address technical queries. Ensures compliance with relevant building codes, standards, and regulations in PHE system designs. Performs quality control checks on PHE designs and documentation before final submission. Contributes to the development of in-house design standards and best practices for PHE systems. Qualifications Minimum Bachelor's degree in Mechanical Engineering, Civil Engineering, or related field 7+ years of experience in PHE design for commercial and industrial projects LEED AP certification Experience with Building Information Modeling (BIM) and Revit Knowledge of fire protection systems, including hydrant systems, sprinkler systems, fire zoning, fire extinguishers, and clean agent systems Familiarity with energy modeling and analysis software Experience with Navisworks for clash detection and coordination Strong project management skills and experience leading design teams Excellent communication skills, both written and verbal Experience in client-facing roles and ability to present technical information to non-technical audiences

Role & responsibilities Draughtsman - PHE Preferred candidate profile - Drafting of Fire & PHE services, plant room layout, floor layout, system schematic etc. - Coordination of MEP services (FPS, PHE, Electrical & HVAC) - Coordination with client, internal design team, Execution team. - Quantification of material from drawing - Quantification of material from drawing along with supporting accessories required. - AutoCAD software knowledge -MS office - BIM/Revit software knowledge

Job Title: Senior Design Engineer PHE & Fire Fighting Location: Bengaluru Experience Required: 6–10 Years (4–6 Years Gulf Design Experience Mandatory) Qualification: B.E / B.Tech in Mechanical Engineering We are seeking a Senior Design Engineer – PHE & Fire Fighting to join our dynamic team. The ideal candidate will be responsible for delivering high-quality plumbing and fire protection system designs across a range of commercial, residential, healthcare, retail, and high-rise projects. Key Responsibilities: Lead the planning, concept development, schematic, and detailed design of Plumbing (PHE) & Fire Fighting systems. Design plumbing systems including water supply, sewerage, drainage, medical gas, and LPG/NG systems with all necessary calculations and detailed layouts. Design and layout fire protection systems including sprinklers, hydrants (internal/external), fire pumps, and tanks, supported by hydraulic calculations using Elite software. Prepare designs and layouts for swimming pools and water features . Oversee and review the work of the design team to ensure quality, completeness, and accuracy. Independently manage design delivery or collaborate effectively as part of a multidisciplinary team. Allocate project resources, budgets, and man-hours efficiently. Ensure compliance with QA/QC procedures , engineering standards (national/international), and relevant authority guidelines. Utilize engineering tools including AutoCAD, Revit, Navisworks, BIM360, and MS Office . Key Skills: Strong technical expertise in plumbing and fire protection design. Proficient in relevant codes, standards, and Gulf region authority regulations. Excellent communication, coordination, and team leadership skills. Experience with BIM and digital design platforms. How to Apply: Interested candidates are invited to submit their resume and portfolio to prashanth.m@khatibalami.com

Role & responsibilities - Drafting of Fire & PHE services, plant room layout, floor layout, system schematic etc. - Coordination of MEP services (FPS, PHE, Electrical & HVAC) - Coordination with client, internal design team, Execution team. - Quantification of material from drawing Job Description:- - Drafting of Fire & PHE services, plant room layout, floor layout, system schematic etc. - Coordination o f MEP services (FPS, PHE, Electrical & HVAC) - Coordination with client, internal design team, Execution team. - Quantification of material from drawing along with supporting accessories required. - AutoCAD software knowledge -MS office - BIM/Revit software knowledg e Preferred candidate profile

Responsibilities: 1. Develop Detailed BIM Models For HVAC Systems, Including Ductwork, Piping, And Equipment. And Plumbing, Fire-Fighting, And PHE (Public Health Engineering) Systems. 2. Collaborate With Architects And Other Engineering Disciplines To Integrate HVAC / PHE / Fire-Fighting Designs Into The Overall BIM Project Model. 3. Ensure Accuracy And Completeness Of HVAC Models / PHE / Fire-Fighting Models And Associated Documentation. 4. Perform Clash Detection And Resolve Clashes Related To HVAC / PHE / Fire-Fighting Elements. 5. Data Extraction, Utilizing The BIM Model To Extract Data For Quantity Takeoffs. 6. Generate Construction Documents, Shop Drawing And Support The Creation Of As-Built Documentation. 7. Collaborate With Project Teams To Meet Project Deliverables And Deadlines. 8. Stay Updated On Industry Trends And Advancements In BIM Technology And Methodologies Related To HVAC / PHE / Fire-Fighting Systems. 9. Follow Company/Project BIM Standards, Templates, And Best Practices. 10. Assist In Quality Control Processes And Provide Guidance To Junior Team Members, If Applicable. Skillset Required: 1. Proficiency In BIM Software, Such As Revit, Navisworks, With Expertise In HVAC System Modeling / PHE / Fire-Fighting System Modeling And Detailing. 2. Strong Understanding Of HVAC / Plumbing, Fire-Fighting, And PHE System Design Principles And Codes. 3. Knowledge Of BIM Standards And Best Practices In The HVAC / PHE / Fire-Fighting Discipline. 4. Excellent Communication And Collaboration Skills To Work Effectively With Multidisciplinary Teams. 5. Detail-Oriented With A Focus On Accuracy And Quality Control.

Role & responsibilities 1. Preparation of MEP shop drawings / Revit modelling of HVAC , Electrical , Plumbing &Fire fighting services up to LOD 500. 2. Clash identification, rectification & review. 3. Coordinated drawings, drawing extracts with detailing, and Value engineering Job Description:- 1. Managing BIM standard s: Developing, implementing, and enforcing BIM standards for all projects, files, and models. 2. Creating BIM models: Creating, coordinating, managing, and updating an organization's BIM model. 3. Coordinating project model deliveries and reviewing models to ensure accuracy and compliance. etc. 4. Managing resources: Managing people and resources, including overseeing BIM budgets and keeping track of the company's hardware. 5. Leading BIM coordination meetings to discuss project updates and issues. 6. Monitoring: Monitoring the process for potential improvements and generating reports for senior staff. 7. Training: Training or upskilling colleagues in specific software programs 8. Revit Modeling of HVAC , Electrical , Plumbing &Fire fighting services in commercial / office buildings / data centres etc. 9. Revit MEP Co-ordination 10. Revit Families creation 11. Clash test 12. Overall Revit BIM Modeling& co-ordination 13. Duct sizing , CHW ; CW pipe sizing , sprinkler pipe sizing , drawinage / water supply pipe sizing , cable containment sizing Preferred candidate profile Candidate should be HVAC background / REVIT

Hello all, We have multiple openings in PH design Team with Middle East project experience. If you posses work experience in Public Health Design Engineer kindly apply for this role.