257 Oscilloscope Jobs - Page 6

Key Responsibilities : Manage product testing and validation for critical power supply system, including SMPS, AC/DC converters, DC/DC converters, DC/AC inverters, UPS and telecom battery backups. Analyze and validate electrical schematics and BOM. Develop test strategies and derive validation and verification requirements. Execute test protocols, validation plans and QA procedures with precision. Lead and manage customer inspections and FAT processes. Lead a team of testing engineers and technicians, ensuring precise execution of both manual and automated test cases. Ensure test documentation, reporting, and traceability of all test results. Support root cause analysis and corrective action for field failures or customer complaints. Collaborate with external labs and certification bodies for compliance testing and approvals. Engage in all phases of system test development from product definition to production deployment, ensuring seamless transitions. Ensure all products meet performance, safety, reliability, and regulatory standards (ETSI, IEC, IEEE, etc.). Coordinate with R&D, design, and product teams to review design validation plans and suggest improvements. Maintain, calibrate and evaluate factory test instruments and equipment’s. Participate in internal and external customer audits, including ISO compliance evaluations, ensuring adherence to quality, safety, and regulatory standards. Drive continuous improvement in testing processes, turnaround time, and product quality. Qualification & Skill Sets: B.E./B.Tech in Electrical, Electronics, or Power Engineering. Strong knowledge in DC power systems, telecom site power architecture, and backup solutions. Hands-on experience in testing SMPS, batteries, power electronics, and telecom energy systems. Highly proficient in troubleshooting electrical systems using devices like power analyzer, oscilloscope and Hi-pot testers. Proficient in customer inspections and FAT processes. Skilled in applying problem-solving techniques such as 5-Why, 8D, and Fishbone analysis. Strong knowledge of industrial communication protocols, including MODBUS TCP/IP, CAN, RS485, and RS232, SPI. Familiarity with national and international testing standards, including ETSI, IEC, BIS, and CE. Basic Knowledge in programming with C#, C++, and Python for test automation. Exceptional analytical and problem-solving skills, with a structured approach to issue resolution. Knowledge in analytical tools such as LabVIEW and MATLAB (preferred). Ability to lead teams, manage schedules efficiently and coordinate across multiple departments for seamless operations. Experience in implementing and maintaining ISO 9001:2015, EMS ISO 14001:2015, and OHSAS 18001:2007 standards, ensuring compliance and operational excellence. Preferred Traits: Experience in telecom OEMs or power product companies. Exposure to type test, FAT, reliability test and environmental testing. Knowledge of EMI/EMC testing is an added advantage. Show more Show less

Job Requirements Interact with internal and external stake holders Guide the team to implement, test and integrate requirements Study hardware spec for IP’s and implement BareMetal applications to validate them Designing and implementing BareMetal software for SoC IP’s like I2C, SPI and custom IP’s. Testing and debugging BareMetal system software in Simulator/Emulator/board Analyze behavior of applications in Simulator/Emulator and derive values for KPI parameters Conduct functional, performance and stress testing at the system and component levels Identify analyze and debug silicon issues using tools such as oscilloscope, logic analyzers and protocol analyzers. Review design, code, test reports and other submissions to customer to ensure quality Work Experience Experience in post-silicon validation Good at reading and understanding Hardware Datasheet and schematics Proficiency in C and BareMetal programming language especially structures, pointers and linked lists Good understanding of peripherals like GPIO, I2C, SPI, Timer, DMA, ADC, DAC, PWM etc. Ability to understand circuit diagrams and board layouts Hands on experience with test equipment like oscilloscope, JTAG debuggers, signal generators. Good inter-personal skills Good To Have Skills Experience working on Renesas MCU’s and SoC’s Experience with Linux working environment, ARM processor, GNU toolchain Experience in Yocto build environment and cross-compilation methods Experience in Linux middleware (SDK) development and testing using sample applications Familiarity with industry standard EDA tools and methodologies Experience with AI driven validation tools Proficiency in C programming using structures, pointers and linked lists Good communication skill and agile personality Show more Show less

Job Requirements We are looking for an Engineer - System Verification. In this role you will take the responsibility of the execution of verification tests, develop test methods, analyze measurement data and report test results in accordance with internationally established standards. Tasks And Responsibilities Performing and reporting of verification & validation tests for systems and subsystems as per the test protocols. Write test reports and other technical documentation according to applicable standards and regulations. Perform product tests using laboratory tools (multimeter, oscilloscope, etc.). Design test methods and perform test method validation activity, including MSA, writing the relative documentation. Develop and execute test plans, including defining test procedures, setting up equipment, and ensuring proper calibration. Analyse and interpret test results, identifying potential issues, and providing recommendations for corrective actions. Prepare detailed test reports and documentation for submission to regulatory bodies and clients. Execute test cases, scripts, and data for various types of testing, including functional, performance, usability, security, and reliability Identify, report, and track defects, working closely with developers and stakeholders to resolve issues Work Experience Skills and qualifications: Technical Bachelor's degree in e.g. Mechatronics or Electrical Engineering Minimal 3 years of industry experience in a comparable area of responsibility including solid understanding of design verification process Knowledge of international (medical) standards and regulations. Understanding of statistical methods, test method validation, use of MiniTAB; Show more Show less

Provide technical support to customers, FAEs, module partners and distributors through digital channels to customers to use Infineon Wi-Fi connectivity chips during evaluation and development phase of their application. You will also assist in selection, evaluation and integration of Infineon Wi-Fi products Recreate, debug and solve the technical issues reported by customers at any time during the life cycle of Wi-Fi connectivity chips. Work cross functionally with product line applications, marketing, hardware design, chip design, software and content development teams to solve issues reported by customers Develop collaterals (code examples, application notes, knowledge articles) for customers. Prepare and deliver product/application training to peers and customers. Your Profile Bachelors/Masters in Electrical / Electronics / Electronics and Communication Engineering or related degree. 3+ years experience working on Wi-Fi products as an application engineer. Good knowledge on Wi-fi protocol and its working. Experience in debugging and fix issues at application or firmware level of Wi-Fi Ability to conduct investigative research to identify and resolve customers technical issues. Experience in writing and debugging software in C/C++ or any other high-level languages. Exposure to embedded systems and/or Linux, Python, scripting will bean added advantage. Experience in using tools like Oscilloscope, multi-meter, function generator, spectrum analyser etc Interest and ability to learn new technologies very quickly. Good communication skills, both written and verbal. A customer-oriented mindset and focus on innovative, scalable methods to make customers self-sufficient

Depending on your interests and aptitudes, in this role you will do a combination of: Working with interns and full time engineers to set up test rigs that simulate elements of a home and include various test equipment Building out inventory for custom cabling/devices Assembling large scale test builds As we are a startup, this list is neither exhaustive nor complete. We are excited for people to explore responsibilities outside their areas of expertise if the need or interest arises. We also do not expect every candidate to do all of these things; we each work on the areas of our interest and skill set. Responsibilities As a test technician you might expect to work on projects such as Building a test rigs to facilitate systems testing on a complex mechatronic system Building testing tools to support debug efforts Supporting fixture builds Performing custom PCBA rework Maintaining stock of commonly used custom cables/devices About You Required Qualifications Experience building wire harnesses from drawing, wiring electrical outlets, building from schematics/CAD, working with T-slot extrusion, unistrut, or related experience Working knowledge of residential electrical wiring Is excited to learn and grow in a cooperative team environment, working on robust solutions to complex problems Has experience with large scale building tools ( table saws, power tools, industrial wiring) Bonus Qualifications we'do not expect any technician to have all skills, but we'do want you to be broadly skilled and excited to grow. Some additional qualifications that would benefit the work are: Working knowledge of various line power (240 @60hz, 208 @ 60hz) Comfort with SMT rework Experience with hardware for automation like relays and contactors. Has experience tinkering with electronics and is comfortable with electronics tools (eg oscilloscope, DMM, power supplies) Has experience with rapid prototyping tools (3D printers, laser cutters, etc)

Job Information Job Opening ID ZR_2086_JOB Date Opened 12/12/2023 Industry Technology Job Type Work Experience 4-6 years Job Title Feature - CommunicationLIN / SENT / CAN / Ethernet City Bangalore North Province Karnataka Country India Postal Code 560002 Number of Positions 2 Work modeHybrid Major Skills and Experience Basic knowledge of AUTOSAR Architecture. Strong hands on experience in testing the complete engine control features. Strong expertise in CAN, UDS protocol, LIN, Ethernet. Solid expertise in analysis of waveform using power probe, Tektronics Oscilloscope. Good hands on experience in physical fault diagnostics on the Outputs. Experience in VehSpy Functional block programming. Should have experience to understand the existing python script and updates according to n Strong expertise in Python Programming and debugging the python script on the test bench Solid hands-on experience in OPAL RT Simulator, Intrepid Neofire, Vehicle Spy, Lauterbach Good experience in handling the test equipment's Tektronics Oscilloscope, Arbitrated Funct Experienced in JIRA, IBM Polarion, Plastic SCM workflow.Educational Qualifications: B.E/B.Tech/M.E/M.Tech in Electronics / Communication / Electrical / Power Electronics / Ins check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

Job Information Job Opening ID ZR_1683_JOB Date Opened 23/12/2022 Industry Technology Job Type Work Experience 3-5 years Job Title Hardware Design Engineer City Chennai Province Tamil Nadu Country India Postal Code 600001 Number of Positions 4 1. Graduate in Electronic Engineering or equivalent Minimum 3-5 years working experience in a similar industry Self-driven individual with hands-on skills. 2. Experience of embedded electronic Digital, Analog, Power electronic design. 3. Familiarity with ECAD tools for schematic capture, simulation, component selection, PCB design. 4. Experience of design for EMI/EMC. 5. Create manufacturing deliverables for prototypes and production. 6. Application of Design for Manufacturability (DFM) and Design for Testability (DFT) techniques. 7. Experience of debugging and fault finding in new and existing designs. 8. Experience of failure analysis and design review. 9. Experience with tools like Cadence or ORCad. 10. Creation of RFQ package for EMS provider and qualification of offers. 11. Experience of project/task planning. 12. Knowledge of project management tools. 13. Well versed with usage of test equipment like Multimeter, Oscilloscope and maintenance of laboratory equipment. 15. Familiarity with EMI, EMC, Environmental, Mechanical standards and type tests. check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

Job Information Job Opening ID ZR_2101_JOB Date Opened 22/01/2024 Industry Technology Job Type Work Experience 4-6 years Job Title Feature -Complex IO City Bangalore North Province Karnataka Country India Postal Code 560002 Number of Positions 2 Major Skills and Experience Basic knowledge of AUTOSAR Architecture. Strong hands on experience in testing the complete engine control features (Injectors, Fuel Pump, WRAF Sensor, Solenoid) Strong expertise in analysis of output injector current profile waveform using Tektronics Oscilloscope. Ability to setup the required bench configuration to perform the waveform analysis. Should have experience to understand the existing python script and updates according to new changes if required. Strong expertise in Python Programming and debugging the python script on the test bench, Solid hands-on experience in OPAL RT Simulator, Intrepid Neofire, Vehicle Spy, Lauterbach T32 on Infineon AURIX TriCore tools usage. Good experience in handling the test equipment's Tektronics Oscilloscope, Arbitrated Functional Generator, Lauterbach Debugger and real loads (Injectors, Solenoids, Fuel Pumps.etc) Experienced in JIRA, IBM Polarion, Plastic SCM workflow.Experience: 4 -6 years of relevant work experience testing complex IO modules of ECM with BSW software.. check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

Job Information Job Opening ID ZR_2100_JOB Date Opened 22/01/2024 Industry Technology Job Type Work Experience 4-6 years Job Title Feature -Simple IO City Bangalore North Province Karnataka Country India Postal Code 560002 Number of Positions 2 Experience 4+ years of relevant work experience testing analog inputs, discrete inputs / outputs, PWM IO, H Bridge etc.,Major Skills and Experience: Basic knowledge of AUTOSAR Architecture. Strong hands on experience in testing the complete engine control features (Injectors, Fuel Pump, WRAF Sensor, Solenoid) Solid expertise in analysis of PWM Input and Output waveform using power probe, Tektronics Oscilloscope. Good hands on experience in physical fault diagnostics on the Outputs. Should have experience in testing the data latency between HW signal to SW update. Hands on experience in setting the Lauterbach Power probe for manual and automated testing Ability to setup the required bench configuration to perform the waveform analysis. Should have experience to understand the existing python script and updates according to new changes if required. Strong expertise in Python Programming and debugging the python script on the test bench, Solid hands-on experience in OPAL RT Simulator, Intrepid Neofire, Vehicle Spy, Lauterbach T32 on Infineon AURIX TriCore tools usage. Good experience in handling the test equipment's Tektronics Oscilloscope, Arbitrated Functional Generator, Lauterbach Debugger and simulated load. Experienced in JIRA, IBM Polarion, Plastic SCM workflow. check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

Position Senior Engineer / Technical Lead (Linux / Android Camera Driver Developer) Job Description What You'll Be Doing Design and development of real time embedded software/firmware and PC/mobile based software application. Analyze domain specific technical or low level requirement and modification as per end customer or system requirement & participate in software design Perform software testing including unit, functional and system level requirement including manual and automated Document technical deliverable like software specifications, design document, code commenting, test cases and test report, Release note etc. throughout the project life cycle. Develop software solutions from established programming languages or by learning new language required for specific project. Develop new approaches to complex design problems What Are We Looking For Strong knowledge for Linux device drivers, Linux Kernel Programming, Linux Kernel Internals, Linux BSP Expert in multimedia such as CSI, camera, video capture, display, video encoder, video decoder, ISP drivers, audio capture, audio playback, V4L2, ALSA and middleware. Excellent understanding of audio / video formats and compression techniques Experience working with development tools like oscilloscope, protocol analyser, emulator, signal generator, JTAG programmer, GIT, SVN, JIRA. Experience working with different embedded microprocessor based on Qualcomm, TI, NXP, NVIDIA, Intel or similar Understanding of hardware schematic, datasheet of hardware component to derive firmware/software specific solution Strong sense of ownership, passionate, fast learner, analytical mind set, perfection seeker. Requires in-depth knowledge and experience Solves complex problems; takes a new perspective using existing solutions Works independently; receives minimal guidance Acts as a resource for colleagues with less experience Represents the level at which career may stabilize for many years or even until retirement Contributes to process improvements Typically resolves problems using existing solutions Provides informal guidance to junior staff Works with minimal guidance Location: Hyderabad, Ahmedabad Location: IN-TG-Hyderabad, India-Kondapur (eInfochips) Time Type Full time Job Category Engineering Services Show more Show less

🔧 Job Title: Chip Level Engineer (Hardware Repairer) 📍 Company: Matrix Info System 💼 Location: X-22, F Block, Pocket X, Okhla Phase II, Okhla, New Delhi, Delhi 110020, India 💰Monthly Salary: ₹15,000 – ₹25,000 per month (based on experience and skill level) Job Description: We are seeking a skilled Chip Level Engineer to join our technical repair team. The ideal candidate will be responsible for diagnosing and repairing complex hardware issues at the component level, especially for desktops and motherboards. Key Responsibilities: * Diagnose and repair hardware faults at the chip/component level * Use soldering, desoldering, and BGA rework stations for precision repairs * Identify issues in motherboards, SMPS, and other internal components * Replace faulty ICs, resistors, capacitors, and connectors * Work closely with the customer support team for technical resolutions Requirements: * Minimum 3+ years of hands-on chip-level repair experience * Strong knowledge of electronic components and circuit behavior * Proficiency with multimeter, oscilloscope, and repair tools * Diploma or ITI in Electronics or relevant field preferred * Ability to work independently under minimal supervision Show more Show less

What you will do In this role, you will be part of Lab team to work on the assigned task, support the cross functional teams. The Lab technician will work closely with Lab supervisor for the development of desired setup, rework of electronics and mechanical assembiles, board assembly and maintaining the Lab for Fire detection systems. You will work within a multi-disciplined engineering team consisting of electronics engineers, mechanical engineers, PCB Layout design engineers, firmware engineers, and manufacturing to provide new and improved products and solutions for our customers. How you will do it Supports Hardware , Mechanical, Firmware, QA teams. Independently works on the task assigned and complete it first time right. Extensive Hands-on experience on using the Soldering & de-soldering station. Hands on experience on soldering all type of SMT components. Understanding inventory management of equipment. Experience in setup preparation. Understanding of the ISO process for Lab Audit. Understanding the working of the basic equipment. What we look for Thorough knowledge of on Lab management. Extensive experience in soldering of all SMD components. Experience with lab equipment including oscilloscope, DVM, signal generators. Working knowledge of industry standard soldering and De soldering station. Experience in preparing the test jig, Test setup etc. Knowledge of basic mechanical assembly and terminologies. Experience in maintaining 5S in Lab . Experience in maintaining Equipment calibration report . Experience in maintaining document as per ISO. Experience in maintaining the inventory of tools and equipment

The Technical Solution Architect for Embedded Product Development will serve as the technical bridge between ACL Digital's engineering capabilities and client requirements. This role combines deep technical expertise in embedded systems with strong client-facing skills to drive business growth in the embedded engineering and product development domain. Key Responsibilities Client Engagement & Relationship Management. Lead technical discussions with prospective clients during the presales process. Conduct technical discovery sessions to understand client challenges and requirements. Present ACL Digital's embedded engineering capabilities to C-level executives and technical decision-makers. Build and maintain relationships with key technical stakeholders at target accounts. Collaborate with business development teams to identify and qualify new opportunities. Solution Architecture & Design: Design comprehensive embedded product development solutions aligned with client needs. Create technical proposals, architecture diagrams, and solution blueprints. Develop proof-of-concepts and technical demonstrations for complex embedded systems. Define project scope, timelines, and resource requirements for embedded development projects. Ensure solutions leverage ACL Digital's chip-to-cloud expertise and system integration capabilities. Technical Leadership & Consultation. Provide technical guidance on embedded systems architecture and design patterns. Advice clients on technology stack selection, platform choices, and development methodologies. Support RFP responses with detailed technical sections and innovative solution approaches. Conduct technical feasibility assessments and risk analysis for proposed solutions. Stay current with emerging technologies in embedded systems, IoT, and semiconductor domains. Technical Skillset: Embedded Systems Engineering Microcontrollers & Processors: ARM Cortex (A53, R5, M4/M3/M0) Controllers/processor family. Real-Time Operating Systems: Embedded Linux, FreeRTOS/Zephyr, Bare-metal development. Hardware Platforms: Experience with NXP, TI, STMicroelectronics, and other leading semiconductor platforms. Communication Protocols: SPI, I2C, UART, CAN, USB, Ethernet, Wi-Fi, Bluetooth, Cellular IoT. Signal Processing: Audio/Video processing, radar signal processing, DSP algorithms. Software Development & Architecture: Programming Languages: C/C++, Python, Assembly language. Development Tools: IAR, Keil, GCC toolchain, JTAG debuggers, Oscilloscope, Logic analyzers. Version Control: Git, SVN, Configuration management practices. Security: Embedded security protocols, cryptography, secure boot, hardware security modules. Technology understanding for various verticals such as IoT, Industrial, Networking etc. Product Development Lifecycle: Requirements Engineering: System requirements analysis, traceability, verification & validation. Design Methodologies: Agile, V-Model, Model-Based Design, concurrent engineering. Testing & Validation: Unit testing, integration testing, HIL testing, automated test frameworks. Compliance & Certification: EMC/EMI, FCC, CE marking, industry-specific certifications. Show more Show less

Boeing Test and Evaluation (BT&E) is looking for resources for Boeing Test and Evaluation team is currently looking for Experienced Test & Evaluation Lab Technician- Electrical/Electronic Equipment for Hardware Integration Lab. This position will be in the Boeing India Engineering and Technology Center, Bengaluru , India and reports to the Manager, - Design Engineering, and Boeing Test & Evaluation India. A successful candidate in this role will have passion, creativity, and an insatiable desire for process improvement and efficiency. We need highly responsible professionals committed to upholding the highest standards of safety, quality, and integrity. Boeing Test and Evaluation team is currently looking for Experienced Test & Evaluation Lab Technician - Electrical/Electronic Equipment to join their team in Bengaluru, KA. To support multiprogram Like Test Bench Build, Harness Build and System integration. Hardware Integration Lab Technician are owners of the Lab Test Bench Build, Wire Harness build and System integration and ensure compliance to design configuration, build plan, process requirements and Test Program schedule. Supports and executes an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication & System Integration meets design, test, and program requirements. Position Responsibilities: Responsible for execution of Hardware integration Lab for the BIETC Hardware Integration Lab in accordance with AS9100 & IPC/WHMA-A-620 and Aerospace quality standards for Requirements and Acceptance for Cable/Wire Harness Assemblies. End-to-end development of STE/ATE that includes analyzing the test requirements, understanding various measurement and test instruments involved in the test, analyze their characteristics, identify the communication requirements, support hardware-software integration, system integration, system test, build and deployment Leads and implements manufacturing plans for Test Bench and Sub assembly Build Supports planning of resources, defining process, and guiding HIL team for Test Bench & Sub assembly Build. Create and/or review test plans, test procedures, and test reports Candidate must be a self-starter with a positive attitude, high ethics, and a track record of working successfully under pressure in a time-constrained environment. Experience on military and Aerospace connector selection, Good knowledge on various types of measurement and test equipment is a must (dimensional, electrical, electronic, thermal, etc) Experience performing formal Qualification testing (Examples: DO-160, MIL-STD-810, MIL-STD-461) Develops and implements manufacturing and tooling methodologies for the Electrical Wire Harness Integration Utilizes Knowledge of Wire Harness manufacturing process vis--vis wire cutting, routing, splicing, crimping, soldering, assembling final harness, testing, inspecting Maintains manufacturing BOMs, Tools, Formboards for Wire Harness. Maintains Lab operations documentations like Process Control Records and Work Instructions. Instrument Handling Like Multimeter, Oscilloscope, Waveform Generator. Provides Training and supervises lab team to Test Validate the Sub assembly and Functional Check & validation. Validates and ensures Test bench readiness and Functional validation Interfaces with suppliers and internal stakeholders for material procurement and to build Test Bench and Sub assembly. Receives Material and plans storage and inventory management. Responsible for marking, labeling and packing and dispatch of completed wire bundles. Ensures Tooling and performs Tool Maintenance. Implements lean principles and technologies Ensures manufacturing process matches defined requirements and process specifications Supports/Conducts to plan product testing, test support requirements and acquire equipment, test materials, fixtures, articles and vehicles Supports Manufacturing Engineer in providing Process capability, producibility information for inclusion in project plans and helps document producibility best practices Supports in analyzes design/build concepts to evaluate producible design/build definitions Resolves / Troubleshoots and resolves laboratory and test-related problems to ensure build performance, cost and schedule adherence. Participates in the implementation of Lean principles and technologies. This position may also require to support electrical/mechanical design of wide range of flight test installations including data system racks, data acquisition system equipment, cameras, sensors, access provisions and wire. Candidate shall coordinate with Program Engineering (Project, Design, Quality, etc) and provide periodic update on project progress, quality metrics, project summaries, and other related documents This position is expected to be 100% at BIETC Campus. The selected candidate will be required to work onsite at one of the listed location options. Employer will not sponsor applicants for employment visa status. Basic Qualification : Diploma or higher is required as a BASIC QUALIFICATION, preferably in Production/ Electrical / Mechanical / Aerospace / Aviation/ Aeronautical Engineering from an accredited university with 9-12 years of experience in aerospace domain. Candidate should be IPC620 Certified. Hands on experience of Electrical tools Mentor Graphics/Visio, PLM/ENOVIA and CAD tools like CATIA, CREO, UG NX or SolidWorks would be advantageous Design: Awareness of different materials used in aerospace industry and related finishes & coating processes. Office applications: Word, PowerPoint, Excel, SharePoint Language: Fluency in reading, writing & speaking in English Preferred Qualifications (Desired Skills/Experience ) : IPC/WHMA-A-620 Certified Hands on knowledge of Cable/Wire Preparation, Measuring Cable Assemblies and Wires, Testing Cable Assemblies, Crimp Terminations, Insulation Displacement Connections, Soldered Terminations, Connectorization, Molding/Potting, Splicing, Marking and Labeling, Wire Bundle Securing Shielding, Cable/Wire Harness Protective Coverings, Coaxial and Twin axial Cable Assemblies, Packing. Mechanical Sub assembly Build and installation Knowledge of Engineering Fundamentals for electrical design of simple aerospace components/ electrical wire harnesses with awareness on aerospace materials, manufacturing processes and heat treatments etc. Experience working with global experts in engineering & manufacturing in cross culture performance and hands on coordination experience working in factory environment Propose solutions to routine technical problems of Manufacturing process planning Capable of working as per program needs and BT&E processes Reads, understands, and interprets engineering drawings and specifications Analyze design/build concepts to evaluate producible design/build definitions Resolve technical problems of significant impact to performance, cost or schedule Be a self-starter, able to work with minimum supervision, positive attitude and highest ethics Pro-actively seek information and direction to successfully complete the statement of work Must be able to work collaboratively with very strong teaming skills. Must be willing to work flexible hours (early or late as needed) to interface with Boeing personnel around the world Develop and maintain relationships / partnerships with customers, stakeholders, peers, and partners to deploy collaborative plans and execute on projects Awareness of AS9100 D quality management system Fabricates electrical components and systems that include but are not limited to: wire harnesses, chassis, rack mounted equipment, flight test instrumentation trays, troubleshooting and repairs Performs mechanical assemblies and fabrications including but not limited to: use of hand tools, drill press, and band saws Fabricates and repairs circuit cards including but not limited to: surface mount, through hole component fabrication, applying and removing conformal coats, circuit card troubleshooting, modifications and repairs Performs lab compliance tasks such as tool control, FOD and ESD Good analytical approach for problem solving, driving the innovations with speed and agility. Must be able to work collaboratively with cross-functional teams within Boeing and external partners Must be flexible, with a high tolerance for organizational complexity and ability to work with team members across different cultures and time-zones Demonstrate strong written, oral and interpersonal communication skills. Be fluent in written and spoken English and have high degree of proficiency with MS Office tools Typical Education & Experience: Diploma or higher is required as a BASIC QUALIFICATION, preferably in Production/ Electrical / Mechanical / Aerospace / Aviation/ Aeronautical Engineering from an accredited university with 9-12 years of experience in aerospace domain.

How you will do it · Supports Hardware , Mechanical, Firmware, QA teams. · Independently works on the task assigned and complete it first time right. · Extensive Hands-on experience on using the Soldering & de-soldering station. · Hands on experience on soldering all type of SMT components. · Understanding inventory management of equipment. · Experience in setup preparation. · Understanding of the ISO process for Lab Audit. · Understanding the working of the basic equipment. What we look for · Thorough knowledge of on Lab management. · Extensive experience in soldering of all SMD components. · Experience with lab equipment including oscilloscope, DVM, signal generators. · Working knowledge of industry standard soldering and De soldering station. · Experience in preparing the test jig, Test setup etc. · Knowledge of basic mechanical assembly and terminologies. · Experience in maintaining 5S in Lab . · Experience in maintaining Equipment calibration report . · Experience in maintaining document as per ISO. · Experience in maintaining the inventory of tools and equipment . Show more Show less

Job Title: Charger and Battery Repair Technician – Electric 3-Wheelers (L5 Segment)* Location: Bangalore & Pune * Perform repair and maintenance of chargers and battery systems for electric 3-wheelers (L5 category). * Diagnose and troubleshoot faults at the component level in chargers (rectifiers, capacitors, diodes, ICs, etc.). * Repair and maintain Battery Management Systems (BMS) and Power Distribution Units (PDU) in both LFP and NMC battery packs. * Conduct routine health checks and preventive maintenance of battery packs and charging equipment. * Replace or repair damaged components using appropriate tools and techniques (e.g., soldering, PCB repair). * Handle maintenance and repair of *DC fast charging stations, including **CCS2* and *GB/T protocols*. Key Responsibilities: * Conduct detailed fault analysis of onboard and offboard chargers. * Identify component-level faults using multimeters, oscilloscopes, and battery testers. * Calibrate and test repaired battery packs to ensure safe reusability. * Interpret circuit diagrams and wiring schematics for fault isolation. * Coordinate with the service team to reduce downtime and improve turnaround time. * Follow all safety protocols when working with high-voltage systems. * Document service and repair reports for every job undertaken. * Stay updated with evolving technologies in EV charging and battery management. Technical Skills Required: Strong knowledge of: * Rectifiers, capacitors, diodes, MOSFETs, and ICs * Battery Management Systems (BMS) for LFP and NMC cells * Power Distribution Units (PDUs) * CAN communication protocol and fault logs Hands-on experience in: * DC fast charger repair – CCS2 and GB/T standards * Component-level diagnostics and PCB repair * Cell balancing, thermal management, and voltage monitoring * Ability to use tools like: * Digital multimeter, battery analyzer, oscilloscope, soldering station Educational Qualifications: * ITI (Electrical / Electronics)* or Diploma in Electrical / Electronics Engineering Experience Required: * Minimum 2 years to 7 years of hands-on experience in: * Battery and charger repair * EV servicing (preferably in electric 3-wheeler or L5 segment) * High-voltage system handling.

Candidate should design the needed circuit, which can meet the Product specifications or requirements. Candidate should develop the circuit schematics using Altium,PADs, KiCad Candidate should develop circuits using microcontrollers, Protocols (I2C, SPI, RS485, USB, CAN, Modbus), and various interfaces (LCD, Keypad, Sensors, Memory chips, RTC, Motors, IOT), power supply modules, CTs/PTs Candidate should draft PCBs (2 or multilayer) using Altium, PADs, or KiCad Candidate should prepare BOM, plan material for proto and arrange it Candidate should participate in building prototype (soldering ,wiring, assembly), validate it, find the issues and fix it Candidate should maintain hardware versions and its release records Candidate should learn the developed circuits and do needed changes in it Candidate should do needed product and project documentation Candidate should participate in doing product validation and its certification Candidate should lead junior engineers, and do task planning Candidate should track the jobs and report work status to reporting person Candidate should learn and adapt needed skills and keep development environment (multi-meter, Oscilloscope, soldering stations, tool kit, programming tools etc.) up to date and calibrated. Candidate should understand the firmware logic and use it in development Candidate should be a good team player, supportive and own the job Special Remarks : Candidate staying in Navi Mumbai will be preferred Candidate with any certification from C-DAC will be preferred Candidate from Medical electronics domain will be preferred

Job Summary We are seeking a detail-oriented and experienced Senior Test and Validation Engineer to join our Quality Department in Hyderabad. The selected candidate will be responsible for planning, executing, and documenting product validation and quality assurance tests for LED lighting products. The role demands strong knowledge of photometric, functional, and accelerated life testing, as well as adherence to relevant national and international standards. Key Responsibilities Develop and execute comprehensive test plans for LED lighting products. Perform photometric, functional, electrical, and accelerated life tests. Ensure compliance with BIS, IS, IEC, and LM standards and certification requirements. Conduct tests in dark rooms, test labs, and environmental chambers. Document and report test procedures, observations, and results accurately. Coordinate with R&D, Production, and SCM teams to resolve quality and performance issues. Maintain, calibrate, and manage lab testing instruments and infrastructure. Support internal and external audits (BIS, ISO, customer inspections). Train and mentor junior engineers and technicians in QA processes and standards. Qualifications & Experience Minimum Bachelor s Degree in Engineering (B.E.) - Electrical, Electronics, or related field. 3 to 6 years of hands-on experience in product testing, preferably in LED lighting, electronics, or electrical manufacturing. Experience with testing procedures under BIS (IS 10322, IS 16101), IEC 60598, IEC 61000, LM79, and LM80 standards. Experience in a NABL or BIS-accredited lab is a plus. Skills Required Strong analytical and documentation skills. High attention to detail in testing and report generation. Familiarity with Microsoft Excel, Word, and standard QA software tools. Good verbal and written communication skills. Problem-solving mindset with a collaborative work ethic. Conduct photometric measurements (luminous flux, efficacy, beam angle, CCT, CRI, etc.) as per LM-79 and IS 16106. Perform electrical safety tests for luminaires as per IS 10322 (Part 5/Section 1 to 8). Operate and calibrate instruments such as: Goniophotometer / Integrating sphere with spectrometer Hi-pot tester, Earth continuity tester, Insulation resistance tester Thermal chamber, Lux meters, Multimeters Ensure test methods and conditions comply with NABL / ISO/IEC 17025 standards. Document and prepare technical test reports with accuracy and completeness. Maintain traceability and calibration status of all test equipment. Assist in method validation, uncertainty calculation, and internal audits. Coordinate with the Quality/Accreditation team to support NABL documentation and surveillance assessments. Ensure safe and efficient operation in the laboratory environment. Degree in Electrical, Electronics, or related field. Sound knowledge of: 10322 series, LM-79, IS 16106, IEC 60598, and related standards. Familiarity with test equipment, measurement procedures, and lab documentation practices. Good written and verbal communication skills. Attention to detail and ability to follow standardized procedures. Instrumentation & Equipment Experience (Preferred) Photometric Testing: Goniophotometer Integrating Sphere Lux Meter Luminance Meter Dark Room Setup Electrical & Functional Testing: Digital Power Analyzer (e.g., Yokogawa, Fluke) High Voltage / Hipot Tester Surge Generator / EFT Simulator LCR Meter Oscilloscope, Multimeter Functional Testing Rigs Environmental & Reliability Testing: Accelerated Life Test (ALT) Chambers Thermal and Humidity Chambers Salt Spray Chamber Burn-in Racks Drop Tester / Vibration Table IP Testing Setup Perks & Benefits Provident Fund (PF) & ESI Coverage Annual Performance Bonus Technical Training and Certification Support Career Advancement Opportunities 6-Day Working Week (Monday-Saturday)

Role & responsibilities Proficiency in C/C++ programming Language and embedded System Development Experience in developing Board support package(BSPs) and Device driver for peripherals based on I2C, SPI, UART Knowledge of hardware platforms and system Architectures(ARM Arch, Vector table, Startup code, Boot loader Etc) Experience with debugging tools such as HW Debugger, Oscilloscope, Multi meter, Logical Analyzer. Knowledge in RTOS/FreeRTOS/ZephyRTOS/Linux

Position Senior Engineer / Technical Lead (Linux BSP) Job Description Job Description What You'll Be Doing Responsible for design and development of real time embedded software/firmware and PC/mobile based software application. To Analyse domain specific technical or low level requirement and modification as per end customer or system requirement. Participate in High level and low level software design Perform software testing including unit, functional and system level requirement including manual and automated Performs software requirement to design to coding to testing traceability Performs code review following coding guidelines and static code analysis Troubleshoots software problems of limited difficulty. Documenting technical deliverable like software specifications, design document, code commenting, test cases and test report, Release note etc. throughout the project life cycle. Follow defined process for software Development life cycle Develops software solutions from established programming languages or by learning new language required for specific project What Are We Looking For Strong knowledge for Linux device drivers, Linux Kernel Programming, Linux Kernel Internals, Yocto / Buildroot or any other build systems. Experience working with development tools like oscilloscope, protocol analyser, emulator, signal generator, JTAG programmer, GIT, SVN, JIRA. Experience working with different embedded microprocessor based on Qualcomm, TI, NXP, NVIDIA, Intel or similar Experience of Board support package, Device driver and boot loader development/porting. Understanding of hardware schematic, datasheet of hardware component to derive firmware/software specific solution Strong sense of ownership, passionate, fast learner, analytical mind set, perfection seeker. Location - Hyderabad, Ahmedabad, Bangalore, Pune, Chennai Location: IN-TG-Hyderabad, India-Kondapur (eInfochips) Time Type Full time Job Category Engineering Services Show more Show less

Who We Are Looking For: We are seeking a skilled and detail-oriented Mid-Level Electronics Engineer to join our engineering team. The ideal candidate will have hands-on experience in circuit design, embedded systems, and PCB development, and will be responsible for driving product development from concept to production. You will work closely with cross-functional teams to ensure quality, cost-effective, and reliable designs. Key Responsibilities: ● Design and develop analog and digital electronic circuits for products and systems ● Develop embedded fi rmware for microcontrollers (e.g., STM32, PIC, AVR, ESP32) ● Create schematics and PCB layouts using tools such as Altium, Eagle, or KiCad ● Conduct prototyping, testing, debugging, and validation of circuits and embedded systems ● Collaborate with mechanical and software teams for system integration ● Prepare technical documentation including design reports, test cases, and BOMs ● Support production teams during product manufacturing and troubleshooting ● Continuously improve existing products for performance, cost, and reliability Required Skills & Qualifi cations: ● Bachelor’s degree in Electronics Engineering, Electrical Engineering, or related fi eld ● 2–5 years of relevant experience in circuit design and embedded development ● Profi ciency in C/C++ for embedded systems ● Strong understanding of microcontrollers, ADCs, sensors, and communication protocols (UART, SPI, I2C) ● Experience with PCB layout and simulation tools ● Hands-on experience with lab equipment (oscilloscope, multimeter, signal generator) ● Ability to read and interpret datasheets, schematics, and technical documents Preferred Skills (Nice to Have): ● Experience with FreeRTOS or other real-time operating systems ● Knowledge of IoT protocols (MQTT, BLE, Wi-Fi) ● Familiarity with EMI/EMC and product certifi cation processes ● Exposure to Python or MATLAB for signal processing or testing automation Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹30,000.00 per month Work Location: In person

Job Summary Responsible for providing lab based and customer-site service, calibrations, and support according to our approved processes and procedures for EMC test and amplifier equipment. This position requires hands on experience with troubleshooting repairing, testing, and calibrating of EMC test equipment and amplifier equipment. Perform unit and system level tests to various standards and problem solving with minimal supervision. Key Responsibilities Support regional service manager to establish a professional service and support business. Continuous improvement of workflows and processes within the area of responsibility. 2nd Level fault diagnostics, troubleshooting and repairs, both in-house and on-site. Support on service and calibration requirements by coordinating between customers and factories. Electrical (DC / LF / RF) calibration in accordance with ISO 17025 requirements. Commissioning, installation and training of products/systems delivered. Up to 30-40% domestic travel may be required for Calibration, Service and support functions. Managing and keeping records of Service and Support cases. Execute, maintain and improves calibration documentation in accordance to company quality system standards (e.g. ISO 17025, ISO 9001, …etc.) Prepare service quotations estimates. Keeping track of service revenues. Minimum Qualifications Bachelor's degree (BSc or BTech) in Electronics Engineering. 3 or more years of experience in calibration and repair of electronic equipment Strong electronics background, good analytical and problem-solving skills. Read and interpret schematics and block diagrams. Exceptional organizational and logistical skills required to manage schedules, travel, certificates, and reporting Customer facing. Excellent interpersonal and communications skills Excellent oral and written communications skills. Independent, confident, persistent, assertive, committed, focused, mission oriented, and a good team player Willing to work overtime as needed. Added advantage: Comfortable with soldering iron, AC/DC power supplies, multimeter, function generators. spectrum and network analyzer, signal generators, sweep generators, oscilloscope, power meters, and other RF related equipment. Experienced in Telecoms/RF field and Low-voltage power systems preferred. Experienced in International EMC standards, including ISO, IEC, ANSI, etc. preferred. Knowledge in ISO 17025 calibrations would be an added advantage. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers’ most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit www.ametek.com for more information. Show more Show less

Hiring for Embedded Manual Testing Experience : 1 - 3 Years Job Location : Bangalore Required Skills 1. Manual Testing (Embedded Application Testing) 2. Good Knowledge on Modbus protocol) 3. Good Knowledge of Controller interfaces. 4. User Interface Testing 5. Controller testing tool multimeter ,oscilloscope, basic electronics control system test. Interested candidates can share the resume yamuna.k@harita.co.in

Post Silicon Validation Engineer Experience3 to 5 Years QualificationB.E / B. Tech / M.E / M. Tech Essential Duties & Responsibilities: Experience in silicon lab validation for power management ICs. Experience with validation of Mixed-signal ICs. Experience in validation test planning, test development, execution, debug and report preparation. Hands-on experience of using lab equipment such as oscilloscope, signal analyzer, signal generator, etc. familiarity of programming and scripting languages like Python, Perl Experience in automation using NI Labview is an advantage Understanding of power management ICs, architecture, specifications interpretation is required Debug skills to zero in on an issue, coordination with cross-functional teams is required Skills Experience LabVIEW, PMIC, Post Silicon Validation, System Validation, Testing Validation Job Category VLSI (Silicon engineering) Job Location FinlandOulu IndiaBangalore IndiaChennai IndiaHyderabad IndiaNoida Malaysia S. KoreaSeoul Singapore USATexas Location - Bengaluru,Chennai,Hyderabad,Noida

Job Summary We are looking for a skilled Electronics Engineer with hands-on experience in designing and prototyping low-power, battery-operated embedded systems. The ideal candidate will be responsible for PCB design, firmware development (RTOS-based), and integrating LTE modules, GNSS receivers, and displays into wearable or compact IoT devices. A strong ability to research, troubleshoot, and manage power systems is essential. 🎯 Key Responsibilities Design and develop custom PCBs using LTE/GNSS modules (e.g., Telit, Quectel). Write and maintain embedded firmware on STM32 or similar MCUs using FreeRTOS or other RTOS. Integrate and control displays (OLED, LCD, etc.) via SPI/I2C with custom GUI or LVGL. Implement and optimize power management strategies for battery-powered devices. Collaborate with mechanical designers to ensure enclosure-PCB fit. Conduct online research to evaluate components, reference designs, and solve integration challenges. Support bring-up, debugging, and validation of prototype boards. Create and manage technical documentation (schematics, BOM, firmware notes). 🧰 Required Skills & Qualifications Proficiency in PCB design tools (Altium, KiCad, or Eagle). Solid understanding of embedded C/C++, STM32 HAL/LL drivers, and RTOS environments. Experience working with cellular modules (LTE, NB-IoT, Cat-M1) and GNSS receivers. Familiarity with power supply design, battery charging circuits, and low-power MCU techniques. Experience with SPI/I2C display modules and libraries like LVGL or custom drivers. Ability to research datasheets, reference designs, and hardware/firmware issues online. Familiarity with lab tools: multimeter, oscilloscope, logic analyzer. Bachelor’s or Master’s degree in Electronics Engineering, Embedded Systems, or related field. ➕ Preferred Qualifications (Nice to Have) Experience with wearable device design or ultra-compact PCBs. Knowledge of wireless certification requirements (e.g., CE, FCC). Exposure to Python or scripting for test automation. Understanding of OTA firmware updates and secure boot.