453 Orcad Jobs - Page 10

Job Description Performs routine tasks in the design of new products and makes improvements to existing products. Learning to evaluate products, parts, or processes for cost efficiency and reliability. Work is overseen by leader to ensure that tasks are completed in a timely manner. Has knowledge of commonly used concepts, practices, and procedures within a particular discipline. Resolves routine questions or problems, referring only complex issues to a higher level. Responsibilities Responsible for designing and developing electrical systems including PCB design with full details of the circuits, components, sensors and special layout requirements for new and existing products. Ensure electrical designs conform with applicable regulatory requirements such as IPC, IEC etc. Research and evaluate suitable electronic subcomponent replacements (Obsolescence Management) as needed to support current and future products. Build and test prototype circuits to qualify the design, ensuring that the design requirements are met and assist manufacturing with the transition of prototype designs to production. Prepare PC board documentation and signoff in PLM System (Windchill). Create both in-house and customer factory acceptance test procedures as required by customer contract/in-house test requirements and performing testing accordingly. Generate work tasks, organize the ordering and delivery of equipment and materials, and facilitate the efficient assembly of the designed system. Provide technical support and assist with documentation of sustaining processes and procedures for electrical and electronic items. Collaborate with members of the engineering staff to ensure that projects/products are completed in a timely manner. Assist Manufacturing and R&M (Repair and Maintenance) personnel with resolution of technical issues. Provide continued support for projects after completion and field commissioning in the form of troubleshooting either remotely, or in person onsite when required. Qualifications Required Skills: Bachelor’s degree in Electronics/ Electrical Engineering from an accredited college/university. Minimum 3 to 6 years of proven experience with electronics system design, PCB design, Instrumentation design and firmware design. Proficient in PADS Siemens EDA, Altium, Windchill PLM. Demonstrate clear written and verbal communication skills and ability to promptly give and follow directions when working with others. Proficiently use MS Office Suite to develop presentations, correspondence, reports, and schedules (Word, Excel, Power Point, etc.). Preferred Skills 4+ years of hands-on experience with designing electronic systems involving complete life cycle of PCB including testing. Experience with electronics/electrical equipment used in the Oil and Gas industry. Experience with LTSpice, PSpice, Matlab, Cadence OrCAD, Silicon Expert. Experience of working with cross functional teams spread across geographies. Travel Requirement: This role may require domestic and potentially international travel of up to: <10% About Us Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. When you join Weatherford, you instantly feel connected to something bigger – a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other’s successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Role & responsibilities Responsible for designing and developing electrical systems including PCB design with full details of the circuits, components, sensors and special layout requirements for new and existing products. Ensure electrical designs conform with applicable regulatory requirements such as IPC, IEC etc. Research and evaluate suitable electronic subcomponent replacements (Obsolescence Management) as needed to support current and future products. Build and test prototype circuits to qualify the design, ensuring that the design requirements are met and assist manufacturing with the transition of prototype designs to production. Prepare PC board documentation and signoff in PLM System (Windchill). Create both in-house and customer factory acceptance test procedures as required by customer contract/in-house test requirements and performing testing accordingly. Generate work tasks, organize the ordering and delivery of equipment and materials, and facilitate the efficient assembly of the designed system. Provide technical support and assist with documentation of sustaining processes and procedures for electrical and electronic items. Collaborate with members of the engineering staff to ensure that projects/products are completed in a timely manner. Assist Manufacturing and R&M (Repair and Maintenance) personnel with resolution of technical issues. Provide continued support for projects after completion and field commissioning in the form of troubleshooting either remotely, or in person onsite when required. Required Skills: Bachelors degree in Electronics/ Electrical Engineering from an accredited college/university. Minimum 3 to 6 years of proven experience with electronics system design, PCB design, Instrumentation design and firmware design. Proficient in PADS Siemens EDA, Altium, Windchill PLM. Demonstrate clear written and verbal communication skills and ability to promptly give and follow directions when working with others. Proficiently use MS Office Suite to develop presentations, correspondence, reports, and schedules (Word, Excel, Power Point, etc.). Preferred Skills: 4+ years of hands-on experience with designing electronic systems involving complete life cycle of PCB including testing. Experience with electronics/electrical equipment used in the Oil and Gas industry. Experience with LTSpice, PSpice, Matlab, Cadence OrCAD, Silicon Expert. Experience of working with cross functional teams spread across geographies.

Company: Did you know KONE moves two billion people every day? As a global leader in the elevator and escalator industry, we employ over 60,000 driven professionals in more than 60 countries worldwide joined together by a shared purpose, to shape the future of cities. In 2023, we had annual net sales of EUR 11.0 billion. Why this role? We are seeking for an Associate Engineer - Electronics supports the design, testing, and implementation of electronic systems and components. This role involves hands-on work with circuit design, embedded systems, and electronic testing, under the guidance of senior engineers. Ideal for candidates with foundational knowledge in electronics and a drive to innovate. What will you be doing? Assist in the design and development of analog and digital electronic circuits. Doing designs with KONE Electronics Design Automation tools or any popular EDA tools in the industry Support testing, troubleshooting, and validation of electronic hardware and embedded systems. Prepare technical documentation, schematics, and test reports. Collaborate with cross-functional teams including mechanical, software, and manufacturing engineers. Conduct component selection and ensure compliance with industry standards. Participate in prototype development and field testing Required Skills: Exposure in Hardware Development Life Cycle (HDLC) Familiar with European & American codes for hardware design (IEC, IPC, EN and CSA etc). Knowledge in Board design on Analog Design, Digital design, microprocessor and microcontroller based design, Memory Interfaces Sound Knowledge on communication protocols like RS232, RS485, SPI, CAN etc Knowledge to EMI, EMC standards & DFM, DFT Knowledge in RF fundamental for design. Knowledge to PCB Design & Simulation tools for Circuit design and analysis. Are you the one? Bachelor’s degree in Electronics/Electrical/Communication/Instrumentation Engineering or related discipline. 1–3 years of experience in electronics design or testing (internships included). Familiarity with EDA tools such as Cadence OrCad, Zuken Cadstar, Zuken CR8000, Cadence OrCAD PSPICE, LTSPICE, SI/PI, DFx etc… Familiarity / Basic Hands on with Lab Equipments - MSO/DSO, Logic analyser, Thermal, High end Power supplies etc… Problem solving skills, Self Learning attitude, Good Communication, Analytical & Presentation skills. What do we offer? Development and growth opportunities within a global organization. Warm and friendly international working environment, covering Being part of an industry leader in sustainability. At KONE, we are focused on creating an innovative and collaborative working culture where we value the contribution of each individual. Employee engagement is a key focus area for us and we encourage participation and the sharing of information and ideas. Sustainability is an integral part of our culture and the daily practice. We follow ethical business practices and we seek to develop a culture of working together where co-workers trust and respect each other and good performance is recognized. In being a great place to work, we are proud to offer a range of experiences and opportunities that will help you to achieve your career and personal goals and enable you to live a healthy and balanced life. Read more on www.kone.com/careers

Job Description This role involves designing innovative and efficient printed circuit boards that meet high performance, reliability, and manufacturing standards. Final output review and design documentation preparation. Design and develop printed circuit boards (PCBs) tailored to product performance, quality, and cost targets. Collaborate with cross-functional teams across different locations to ensure timely project execution. Work closely with hardware and firmware engineers to create schematic diagrams based on project requirements. Utilize advanced PCB design software to create precise and manufacturable board layouts. Perform component placement and routing with a focus on signal integrity and thermal management. Optimize board layout for manufacturability, assembly, and cost-efficiency. Symbol creation, schematic drawing, and footprint assignment. Board outline creation based on DXF or design drawings. Place components and route traces while accounting for signal integrity, power distribution, and thermal constraints. Identify and resolve layout-related design issues in collaboration with the engineering team. Support continuous improvement of internal design standards and workflows. Prepare designs for design reviews and manufacturing hand-off. Stay updated with the latest in PCB materials, processes, and IPC standards. Desired Candidate Profile Experience in designing high-density boards involving microcontrollers, mixed analog/digital circuits, and interfaces such as Ethernet, USB, I2C, SPI, etc. Proficiency in designing RF, analog, and mixed-signal PCBs. Skilled in PCB design tools such as OrCAD, Altium, or DipTrace. Understanding of impedance-controlled circuits, stack-up trade-offs, and panel optimization. Strong grasp of PCB layout best practices, signal integrity, and thermal management. Familiar with IPC standards and design for manufacturability principles. Knowledgeable in minimizing EMI/RFI and ESD through effective design. Capable of identifying and addressing mechanical challenges in PCB design. Detail-oriented with excellent verbal and written communication skills. A solid foundation in basic electronics and electromagnetics is essential. Work location: Ahmedabad, Gujarat Educational Qualification: Bachelor’s degree in Electrical Engineering, Electronics, or a related field (preferred). Industry : Electronics

Company: Did you know KONE moves two billion people every day? As a global leader in the elevator and escalator industry, we employ over 60,000 driven professionals in more than 60 countries worldwide joined together by a shared purpose, to shape the future of cities. In 2023, we had annual net sales of EUR 11.0 billion. Why this role? We are seeking for an Associate Engineer - Electronics supports the design, testing, and implementation of electronic systems and components. This role involves hands-on work with circuit design, embedded systems, and electronic testing, under the guidance of senior engineers. Ideal for candidates with foundational knowledge in electronics and a drive to innovate. What will you be doing? Assist in the design and development of analog and digital electronic circuits. Doing designs with KONE Electronics Design Automation tools or any popular EDA tools in the industry Support testing, troubleshooting, and validation of electronic hardware and embedded systems. Prepare technical documentation, schematics, and test reports. Collaborate with cross-functional teams including mechanical, software, and manufacturing engineers. Conduct component selection and ensure compliance with industry standards. Participate in prototype development and field testing Required Skills: Exposure in Hardware Development Life Cycle (HDLC) Familiar with European & American codes for hardware design (IEC, IPC, EN and CSA etc). Knowledge in Board design on Analog Design, Digital design, microprocessor and microcontroller based design, Memory Interfaces Sound Knowledge on communication protocols like RS232, RS485, SPI, CAN etc Knowledge to EMI, EMC standards & DFM, DFT Knowledge in RF fundamental for design. Knowledge to PCB Design & Simulation tools for Circuit design and analysis. Are you the one? Bachelor’s degree in Electronics/Electrical/Communication/Instrumentation Engineering or related discipline. 1–3 years of experience in electronics design or testing (internships included). Familiarity with EDA tools such as Cadence OrCad, Zuken Cadstar, Zuken CR8000, Cadence OrCAD PSPICE, LTSPICE, SI/PI, DFx etc… Familiarity / Basic Hands on with Lab Equipments - MSO/DSO, Logic analyser, Thermal, High end Power supplies etc… Problem solving skills, Self Learning attitude, Good Communication, Analytical & Presentation skills. What do we offer? Development and growth opportunities within a global organization. Warm and friendly international working environment, covering Being part of an industry leader in sustainability. At KONE, we are focused on creating an innovative and collaborative working culture where we value the contribution of each individual. Employee engagement is a key focus area for us and we encourage participation and the sharing of information and ideas. Sustainability is an integral part of our culture and the daily practice. We follow ethical business practices and we seek to develop a culture of working together where co-workers trust and respect each other and good performance is recognized. In being a great place to work, we are proud to offer a range of experiences and opportunities that will help you to achieve your career and personal goals and enable you to live a healthy and balanced life. Read more on www.kone.com/careers

Role & responsibilities As a Printed Circuit Design Engineer within our Embedded Team, you will play a crucial role in the development of cutting-edge embedded systems. You will be responsible for designing and optimizing printed circuit boards (PCBs) to meet the stringent requirements of our embedded solutions. This role requires a deep understanding of PCB design principles, embedded systems, and a proactive approach to problem-solving. Key Responsibilities: PCB Design: Design, develop, and optimize printed circuit boards for embedded systems, ensuring functionality, performance, and manufacturability. Schematic Capture: Collaborate with hardware and software engineers to capture system requirements and translate them into schematic diagrams. Component Selection: Work closely with the procurement team to select appropriate components based on performance, cost, and availability. Layout and Routing: Execute PCB layout and routing using industry-standard CAD tools, considering factors such as signal integrity, power distribution, thermal management, and EMI/EMC compliance. Design Verification: Conduct thorough design verification and validation, including simulation, prototyping, and testing, to ensure compliance with specifications and standards. Documentation: Prepare comprehensive design documentation, including schematics, layout files, bill of materials (BOM), assembly drawings, and manufacturing instructions. Collaboration: Collaborate effectively with cross-functional teams, including hardware engineers, firmware engineers, mechanical engineers, and manufacturing engineers, to deliver integrated solutions. Continuous Improvement: Stay updated on emerging technologies, industry trends, and best practices in PCB design and embedded systems to drive continuous improvement and innovation. Preferred candidate profile Bachelors/Diploma degree in Electronics and Communication or equivalent. Proven experience in printed circuit board design for embedded systems, with a strong portfolio of successful projects. Proficiency in PCB design tools such as Altium Designer, Cadence Allegro, or Mentor Graphics PADS, KiCad, DipTrace etc. Deep understanding of PCB design principles, including signal integrity, power distribution, thermal management, and EMI/EMC compliance. Familiarity with industry standards and protocols relevant to embedded systems, such as SPI, I2C, UART, USB, Ethernet, and wireless technologies. Strong analytical and problem-solving skills, with the ability to troubleshoot complex issues and propose effective solutions. Excellent communication and interpersonal skills, with the ability to collaborate effectively in a team environment. Detail-oriented mindset with a commitment to quality, accuracy, and continuous improvement. Salary: 3LPA - 6 LPA (Negotiable) If you are passionate about pushing the boundaries of embedded systems through innovative PCB design, we invite you to join our dynamic team. As a Printed Circuit Design Engineer, you will have the opportunity to work on exciting projects, collaborate with talented colleagues, and contribute to the development of next-generation embedded solutions that impact industries worldwide. Apply now to be part of our journey towards excellence in embedded engineering.

Purpose of the Role: The Head of Electrical Engineering will act as the head of electrical R&D and the business process owner for Olympus’s Standard Operating Procedures related to product development (e.g,. Design Controls, Verification, Validation, Design & Development Planning, User & Product Requirements, Administer and obtain Requirements tools, Etc.), and function as a steward of our product development processes. The ideal candidate shall be a hands-on technical leader with extensive experience in developing medical devices and systems. The individual will be responsible for setting up the engineering R&D function for global scope of work and own the execution of engineering projects, ensuring alignment with Olympus’ global R&D strategy. This role is responsible for driving the engineering R&D scope of work, focusing on leading engineering teams and project delivery in collaboration with the Olympus’ global R&D and India leaders. The incumbent will spearhead project planning, budget management, and technical oversight, ensuring seamless coordination across teams to meet project timelines and deliverables with minimal operational input from Olympus HQ. On the technical front, this role will provide strategic oversight to the center while ensuring high-quality engineering outcomes in the development of medical devices. By leading electrical engineering initiatives, this individual will guide the design, verification, and validation processes, ensuring compliance with regulatory standards such as FDA Design Controls. The position demands a strong mix of technical proficiency and proactive project leadership, fostering a collaborative environment that aligns the electrical R&D performance with Olympus’ offshore vision. Key Responsibilities: Functional Setup: Lead the functional setup and management of the electrical function, optimizing workflows, task assignment, hiring/team set-up and resource management Seek to ideate enhancements to systems and processes with the goal of increasing product development efficiency, communication, and/or quality Collaborate with global PMO teams to ensure the engineering R&D function growth roadmap is aligned with Olympus’ long-term R&D strategy and technical priorities Develop and oversee technical training and knowledge-sharing programs for internal teams, fostering continuous skill development and alignment with Olympus’ technical standards Work closely with the PMO to manage demand planning and resource forecasting for the function, ensuring sufficient talent and infrastructure for current and future electrical projects Implement continuous improvement initiatives within the electrical engineering function, driving technical process enhancements and increasing the efficiency and quality of product development across teams Identify and implement cutting-edge technologies and engineering practices to improve product performance and drive innovation Participate in strategic planning and provide technical insights to support long-term growth and competitiveness Recruit staff, develop them through assignments, guidance, and mentorship, and manage their performance Create systems to ensure all updates/changes are communicated across sites/employees NPD and Stakeholder Management: Head the electrical engineering function to own and account for the delivery, execution and management of all NPD activities within the India scope of electrical engineering Provide strategic oversight and guidance for electrical R&D projects, ensuring external and internal teams align with performance specifications, regulatory standards, and Olympus’ overall R&D objectives Oversee the design and development of electrical systems, including circuit design, PCB layout, power management, and signal processing for medical devices Ensure designs are optimized for safety, reliability, manufacturability, and compliance with medical device standards Manage the selection and integration of components, sensors, and electronic systems that meet design requirements and regulatory standards Collaborate with Olympus PMO teams to develop and monitor technical roadmaps, ensuring smooth execution of project goals and resource allocations Act as the subject matter expert on design control for electrical R&D, provide guidance to product development teams (both internal and external) Ensure that design solutions meet performance, cost, manufacturability, and safety requirements through effective review and communication with global stakeholders Drive the development of IP strategies by working with PMO and legal teams, ensuring vendor partner adhere to Olympus’ requirements for protecting intellectual property in product designs Facilitate technical problem-solving by coordinating with global leads, ensuring swift resolution of challenges and minimizing project delays Project Management: Head the Engineering R&D function to serve as the strategic interface between global PMO and vendor partner, providing updates on technical progress, risks, and issues while ensuring alignment with the overall R&D strategy Develop and manage technical roadmaps with input from vendor partner, ensuring timelines, milestones, and resource planning are optimized for the electrical R&D function Regularly report project status to PMO leads and Olympus global teams, ensuring visibility of key technical achievements and roadblocks, and adjusting strategies as needed Manage and oversee the maintenance of technical RAID logs, working with vendor partner to ensure risks are identified, escalated, and addressed promptly Oversee coordination between vendor partner and software development teams to ensure seamless integration of electrical designs into broader product architectures Ensure adherence to Olympus’ design control procedures and drive continuous improvements in these processes to enhance clarity, compliance, and usability Provide high-level guidance on the verification and validation testing strategies proposed, ensuring they meet Olympus’ quality and performance specifications Regulatory & Compliance: Ensure that electrical designs meet relevant regulatory standards (IEC 60601, ISO 13485, FDA 21 CFR Part 820) and safety standards (UL, CE) Lead risk management activities, including electrical safety analysis, electromagnetic compatibility (EMC) testing, and failure modes and effects analysis (FMEA) Act as the point of escalation for technical and regulatory compliance matters, ensuring external and internal teams engage with safety certification bodies and comply with applicable standards Maintain documentation in compliance with Good Manufacturing Practices (GMP) and quality system regulations Risk Management & Problem-Solving: Identify potential technical risks and implement mitigation strategies Provide technical guidance in solving engineering challenges during the product development lifecycle Person Specification: Education A degree or higher qualification in Biomedical / Electrical Engineering from a recognized university. Masters in biomedical /electrical engineering will be an added advantage. Experience 14+ years of overall experience in medical or electrical engineering, maintenance, and management with 10+ years in medical devices domain 5+ years of experience with a medical devices company in a leadership role 9+ years of experience in medical device development, circuit boards, and product design Strong understanding of medical device regulations (ISO 13485, FDA 21 CFR Part 820, etc.) Proven track record of leading teams in the design and development of Class II/III medical devices Familiarity with product development lifecycle including concept, design, validation, and commercialization Skills Strong technical background in electrical engineering, electronics, and mechatronics, with experience in Medical Device development and/or sustaining engineering efforts Proficient in circuit design, PCB layout, power management, analog and digital signal processing, and microcontroller-based systems Expertise in managing R&D engineering projects, including performance tracking, SLA/KPI definition, contract negotiation, and demand planning Proven ability to work through medical device product lifecycle management, including FDA Design Controls and international standards (e.g., 820-CFR, ISO14971, IEC60601), ensuring alignment with strategic roadmaps Experience in Project and Program Management, with a focus on vendor partner management, continuous improvement, and talent growth Familiarity with Agile SCRUM environments and stage-gate processes, ensuring cross-functional collaboration to achieve business objectives Capable of developing deliverables to document product designs for high-volume manufacturing and quality compliance Technical expertise in printed circuit board design tools (Altium/OrCAD) and the ability to review schematics, component selection, and gerber data for PCB design and manufacturing Experience planning and mitigating electromagnetic compatibility challenges in electrical projects Strong knowledge of manufacturing methodologies for medical devices and the ability to solve complex technical problems with sound judgment Proficiency in working with requirements management systems like DOORS, JAMA, and conducting risk analyses and DFMEAs Excellent stakeholder management skills across PMO leads and vendor partner, ensuring timely project delivery and alignment with strategic goals Experience managing large data sets, financial analysis, and P&L ownership, utilizing these insights to drive process improvements and operational efficiencies Strong project management skills, with the ability to manage multiple projects simultaneously Excellent communication, leadership, and problem-solving skills

Job Description This role involves designing innovative and efficient printed circuit boards that meet high performance, reliability, and manufacturing standards. Final output review and design documentation preparation. Design and develop printed circuit boards (PCBs) tailored to product performance, quality, and cost targets. Collaborate with cross-functional teams across different locations to ensure timely project execution. Work closely with hardware and firmware engineers to create schematic diagrams based on project requirements. Utilize advanced PCB design software to create precise and manufacturable board layouts. Perform component placement and routing with a focus on signal integrity and thermal management. Optimize board layout for manufacturability, assembly, and cost-efficiency. Symbol creation, schematic drawing, and footprint assignment. Board outline creation based on DXF or design drawings. Place components and route traces while accounting for signal integrity, power distribution, and thermal constraints. Identify and resolve layout-related design issues in collaboration with the engineering team. Support continuous improvement of internal design standards and workflows. Prepare designs for design reviews and manufacturing hand-off. Stay updated with the latest in PCB materials, processes, and IPC standards. Desired Candidate Profile Experience in designing high-density boards involving microcontrollers, mixed analog/digital circuits, and interfaces such as Ethernet, USB, I2C, SPI, etc. Proficiency in designing RF, analog, and mixed-signal PCBs. Skilled in PCB design tools such as OrCAD, Altium, or DipTrace. Understanding of impedance-controlled circuits, stack-up trade-offs, and panel optimization. Strong grasp of PCB layout best practices, signal integrity, and thermal management. Familiar with IPC standards and design for manufacturability principles. Knowledgeable in minimizing EMI/RFI and ESD through effective design. Capable of identifying and addressing mechanical challenges in PCB design. Detail-oriented with excellent verbal and written communication skills. A solid foundation in basic electronics and electromagnetics is essential. Work location: Ahmedabad, Gujarat Educational Qualification: Bachelor’s degree in Electrical Engineering, Electronics, or a related field (preferred). Industry : Electronics

📐 Job Opening: AutoCAD Designer 🏢 Company: Supreme Sales 📍 Location: Shree Ram Bhawan, Pal Rd, Keshavnagar, Jodhpur, Rajasthan – 342008 ⏰ Walk-in Time: 10:00 AM – 4:00 PM 📄 Bring: Updated CV Job SummaryWe are hiring AutoCAD Designers for a Company The ideal candidate should be passionate about design and possess a strong foundation in drafting and visualization tools. Freshers with the right skills and attitude are welcome to apply. Roles & Responsibilities Prepare 2D and 3D technical drawings using AutoCAD and similar tools Assist in interior design and architectural drafting Support project engineers and site managers with accurate layouts and design inputs Visualize concepts and prepare detailed construction drawings Work collaboratively with the design and execution team on turnkey projects Who Can Apply Age: 18 to 35 years Gender: All genders welcome Education: Diploma (Civil/Interior/Design-related) Experience: Freshers can apply Language: Basic English Required Documents: Aadhaar Card, PAN Card, Bank Passbook Required Skills AutoCAD 2D/3D Drafting Orcad / BricsCAD / ArchiCAD (preferred) Technical Drawing & Design Interior Visualization Job Details Role Category: Construction, Project & Site Management, Interior Design Job Type: Full-Time or Part-Time (Day Shift) Work Type: On-site (Single Job Location) Hiring Area: Jodhpur (Pan India applications accepted) Salary💰 ₹15,000 – ₹35,000 per month (Fixed) Contact for Walk-in 👤 HR Name: Manoj Sharma 📞 Contact Number: 9462902164

Performs routine tasks in the design of new products and makes improvements to existing products. Learning to evaluate products, parts, or processes for cost efficiency and reliability. Work is overseen by leader to ensure that tasks are completed in a timely manner. Has knowledge of commonly used concepts, practices, and procedures within a particular discipline. Resolves routine questions or problems, referring only complex issues to a higher level. Required Skills: bachelors degree in Electronics/ Electrical Engineering from an accredited college/university. Minimum 3 to 6 years of proven experience with electronics system design, PCB design, Instrumentation design and firmware design. Proficient in PADS Siemens EDA, Altium, Windchill PLM. Demonstrate clear written and verbal communication skills and ability to promptly give and follow directions when working with others. Proficiently use MS Office Suite to develop presentations, correspondence, reports, and schedules (Word, Excel, Power Point, etc). Preferred Skills: 4+ years of hands-on experience with designing electronic systems involving complete life cycle of PCB including testing. Experience with electronics/electrical equipment used in the Oil and Gas industry. Experience with LTSpice, PSpice, Matlab, Cadence OrCAD, Silicon Expert. Experience of working with cross functional teams spread across geographies. Travel Requirement: This role may require domestic and potentially international travel of up to: Responsible for designing and developing electrical systems including PCB design with full details of the circuits, components, sensors and special layout requirements for new and existing products. Ensure electrical designs conform with applicable regulatory requirements such as IPC, IEC etc Research and evaluate suitable electronic subcomponent replacements (Obsolescence Management) as needed to support current and future products. Build and test prototype circuits to qualify the design, ensuring that the design requirements are met and assist manufacturing with the transition of prototype designs to production. Prepare PC board documentation and signoff in PLM System (Windchill). Create both in-house and customer factory acceptance test procedures as required by customer contract/in-house test requirements and performing testing accordingly. Generate work tasks, organize the ordering and delivery of equipment and materials, and facilitate the efficient assembly of the designed system. Provide technical support and assist with documentation of sustaining processes and procedures for electrical and electronic items. Collaborate with members of the engineering staff to ensure that projects/products are completed in a timely manner. Assist Manufacturing and RM (Repair and Maintenance) personnel with resolution of technical issues. Provide continued support for projects after completion and field commissioning in the form of troubleshooting either remotely, or in person onsite when required.

This position of Electronics Engineer is to be part of electronics team responsible for the development of drivers and encoders for motors in Portescap. This role will be responsible for the design and development of electronics systems for encoder and controller development with good understanding of motion control systems. Essential Duties And Responsibilities Design and develop electronic circuits for encoder technologies (optical, magnetic, inductive) and controllers. Integrate sensors with microcontroller/microprocessors for real time data acquisition. Develop and optimize signal processing algorithms for parameter evaluation. Create PCB schematic and layouts and testing of PCBs. Benchmark competitor products and performances. Collaborate with CFT to ensure seamless product development and manufacturing. Critical Competencies Knowledge of analog and digital circuits Knowledge of sensors and related electronic circuits Familiarity with microcontrollers (eg. TI, ST) and embedded C/C++ programming Knowledge of PCB designing basics and hands-on experience in schematic and PCB design in any tool as Orcad, Altium, KiCad etc. Hand-on experience with lab instruments such as oscilloscopes, function generator, spectrum analyzer Basic knowledge of signal processing and numerical calculations Basic knowledge of motor and drivers is added advantage Education And Experience Requirements BTech in Electrical Engineering (EE)/Electrical & Electronics Engineering (EEE)/ECE with 5-6 year experience in product design and development. OR Master’s degree in Electrical or Electronics Engineering with 3 - 4 years’ experience in product design and development KEY RELATIONSHIPS Internal: Electronics Engineering, R&D, Product Management, Business Development, Quality, Supply Chain, Manufacturing External: Customers, Suppliers PERSONAL TRAIT/PROFILE: Strong analytical & problem-solving ability Results orientation – must deliver results & have sense of urgency to deliver tasks on time Work Collaboratively with CFTs to drive shared results LANGUAGE SKILLS: Fluency in verbal and written English communication About Regal Rexnord Regal Rexnord is a publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company’s electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company’s automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools. The Company’s end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com.

Requisition ID 189655 Date posted 06/25/2025 Work Location Model On-site Flex Work Location Bangalore-IN-Bangalore Work Country India The group you’ll be a part of In the Global Products Group, we are dedicated to excellence in the design and engineering of Lam's etch and deposition products. We drive innovation to ensure our cutting-edge solutions are helping to solve the biggest challenges in the semiconductor industry. The impact you’ll make Join Lam as an Electrical Engineer and you'll be at the forefront, designing and developing electronic solutions for advanced applications. Your role involves designing and analyzing equipment, conducting experimental tests, evaluating results to create reliable cutting-edge solutions. In this role, you will directly contribute to ___. What you’ll do Design and develop electrical systems, sub-systems, and/or solutions, applying engineering methods to design. Contributes to research and development efforts by collecting and analyzing data to improve electrical system designs. Assists with development of functional specifications for electrical/ electro-mechanical systems and power distribution components. Collaborate with cross-functional engineering design teams to design and modify custom and OEM system components. Perform hands-on test and validation utilizing lab equipment to characterization of the performance of the electrical/ electro-mechanical systems. Prepare high-quality reports and technical presentations to clearly communicate design intent, analysis, and results to diverse audiences in design reviews. Who we’re looking for Minimum Qualifications: Bachelor’s degree in Electrical Engineering or related field with 2+ years of experience; or an advanced degree without previous professional experience; or equivalent work experience. Hands-on experience in electronic circuit design (analog, digital), signal and controls theory, development and associated electrical board design, troubleshooting and validation. Understanding of AC/DC Power distribution systems. System level understanding of Electrical architecture, system integration, and applications. Working knowledge in Printed Circuit Board (PCB) and low voltage circuit design for power and control applications. Knowledge in application of power and controls technologies for systems automation. Knowledgeable in CAD tools for circuit design and simulation (e.g., PCAD, ORCAD, ZUKEN, AutoCAD, Spice, ADS, HFSS). This is a graduate eligible role. Preferred qualifications Familiar with design for serviceability, manufacturability, reliability. Skilled at troubleshooting systems with tools like network sniffers, protocol analyzers, and tool logs. Understanding of troubleshooting with problem-solving techniques such as 5-why, 8D, fishbones, etc. Excellent oral and written communication skills including technical presentations. Our commitment We believe it is important for every person to feel valued, included, and empowered to achieve their full potential. By bringing unique individuals and viewpoints together, we achieve extraordinary results. Lam Research ("Lam" or the "Company") is an equal opportunity employer. Lam is committed to and reaffirms support of equal opportunity in employment and non-discrimination in employment policies, practices and procedures on the basis of race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex (including pregnancy, childbirth and related medical conditions), gender, gender identity, gender expression, age, sexual orientation, or military and veteran status or any other category protected by applicable federal, state, or local laws. It is the Company's intention to comply with all applicable laws and regulations. Company policy prohibits unlawful discrimination against applicants or employees. Lam offers a variety of work location models based on the needs of each role. Our hybrid roles combine the benefits of on-site collaboration with colleagues and the flexibility to work remotely and fall into two categories – On-site Flex and Virtual Flex. ‘On-site Flex’ you’ll work 3+ days per week on-site at a Lam or customer/supplier location, with the opportunity to work remotely for the balance of the week. ‘Virtual Flex’ you’ll work 1-2 days per week on-site at a Lam or customer/supplier location, and remotely the rest of the time.

Printed Circuit Board (PCB) Design Engineer 1 – 1.5 Years Experience Job Description · This role involves designing innovative and efficient printed circuit boards that meet high performance, reliability, and manufacturing standards. · Final output review and design documentation preparation. · Design and develop printed circuit boards (PCBs) tailored to product performance, quality, and cost targets. · Collaborate with cross-functional teams across different locations to ensure timely project execution. · Work closely with hardware and firmware engineers to create schematic diagrams based on project requirements. · Utilize advanced PCB design software to create precise and manufacturable board layouts. · Perform component placement and routing with a focus on signal integrity and thermal management. · Optimize board layout for manufacturability, assembly, and cost-efficiency. · Symbol creation, schematic drawing, and footprint assignment. Board outline creation based on DXF or design drawings. · Place components and route traces while accounting for signal integrity, power distribution, and thermal constraints. · Identify and resolve layout-related design issues in collaboration with the engineering team. · Support continuous improvement of internal design standards and workflows. · Prepare designs for design reviews and manufacturing hand-off. · Stay updated with the latest in PCB materials, processes, and IPC standards. Desired Candidate Profile · Experience in designing high-density boards involving microcontrollers, mixed analog/digital circuits, and interfaces such as Ethernet, USB, I2C, SPI, etc. · Proficiency in designing RF, analog, and mixed-signal PCBs. · Skilled in PCB design tools such as OrCAD, Altium, or DipTrace. · Understanding of impedance-controlled circuits, stack-up trade-offs, and panel optimization. · Strong grasp of PCB layout best practices, signal integrity, and thermal management. · Familiar with IPC standards and design for manufacturability principles. · Knowledgeable in minimizing EMI/RFI and ESD through effective design. · Capable of identifying and addressing mechanical challenges in PCB design. · Detail-oriented with excellent verbal and written communication skills. · A solid foundation in basic electronics and electromagnetics is essential. Educational Qualification Bachelor’s degree in Electrical Engineering, Electronics, or a related field (preferred). Salary Rs. 3 L to 3.6 Lakhs /- Per Annum (Take Home) Company Profile Atigo Enterprises Ltd is a leading technology company dedicated to innovation within the technology space. The company has expertise in IoT, AI/ML, Cloud computing, Electronics, Marine and Defence with its own manufacturing setup within India. The company has global presence with offices in the UK and India. Each department of Atigo is empowered with diversity in its people. We at Atigo celebrate that each individual is unique and brings in his/her unique experiences that enhance the experience of working and help bring better solutions to our customers. Diversity and culture of inclusiveness are at the core of Atigo values. Contact Details Call 9099901673 or email hr@atigo.in Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹30,000.00 per month Schedule: Day shift Fixed shift Ability to commute/relocate: Gota, Ahmedabad, Gujarat: Reliably commute or planning to relocate before starting work (Preferred) Education: Diploma (Preferred) Experience: PCB: 1 year (Preferred) Location: Gota, Ahmedabad, Gujarat (Preferred) Shift availability: Day Shift (Preferred) Work Location: In person

Printed Circuit Board (PCB) Design Engineer 1 – 1.5 Years Experience Job Description · This role involves designing innovative and efficient printed circuit boards that meet high performance, reliability, and manufacturing standards. · Final output review and design documentation preparation. · Design and develop printed circuit boards (PCBs) tailored to product performance, quality, and cost targets. · Collaborate with cross-functional teams across different locations to ensure timely project execution. · Work closely with hardware and firmware engineers to create schematic diagrams based on project requirements. · Utilize advanced PCB design software to create precise and manufacturable board layouts. · Perform component placement and routing with a focus on signal integrity and thermal management. · Optimize board layout for manufacturability, assembly, and cost-efficiency. · Symbol creation, schematic drawing, and footprint assignment. Board outline creation based on DXF or design drawings. · Place components and route traces while accounting for signal integrity, power distribution, and thermal constraints. · Identify and resolve layout-related design issues in collaboration with the engineering team. · Support continuous improvement of internal design standards and workflows. · Prepare designs for design reviews and manufacturing hand-off. · Stay updated with the latest in PCB materials, processes, and IPC standards. Desired Candidate Profile · Experience in designing high-density boards involving microcontrollers, mixed analog/digital circuits, and interfaces such as Ethernet, USB, I2C, SPI, etc. · Proficiency in designing RF, analog, and mixed-signal PCBs. · Skilled in PCB design tools such as OrCAD, Altium, or DipTrace. · Understanding of impedance-controlled circuits, stack-up trade-offs, and panel optimization. · Strong grasp of PCB layout best practices, signal integrity, and thermal management. · Familiar with IPC standards and design for manufacturability principles. · Knowledgeable in minimizing EMI/RFI and ESD through effective design. · Capable of identifying and addressing mechanical challenges in PCB design. · Detail-oriented with excellent verbal and written communication skills. · A solid foundation in basic electronics and electromagnetics is essential. Educational Qualification Bachelor’s degree in Electrical Engineering, Electronics, or a related field (preferred). Salary Rs. 3 L to 3.6 Lakhs /- Per Annum (Take Home) Company Profile Atigo Enterprises Ltd is a leading technology company dedicated to innovation within the technology space. The company has expertise in IoT, AI/ML, Cloud computing, Electronics, Marine and Defence with its own manufacturing setup within India. The company has global presence with offices in the UK and India. Each department of Atigo is empowered with diversity in its people. We at Atigo celebrate that each individual is unique and brings in his/her unique experiences that enhance the experience of working and help bring better solutions to our customers. Diversity and culture of inclusiveness are at the core of Atigo values. Contact Details Call 9099901673 or email hr@atigo.in Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹30,000.00 per month Schedule: Day shift Fixed shift Ability to commute/relocate: Gota, Ahmedabad, Gujarat: Reliably commute or planning to relocate before starting work (Preferred) Education: Diploma (Preferred) Experience: PCB: 1 year (Preferred) Location: Gota, Ahmedabad, Gujarat (Preferred) Shift availability: Day Shift (Preferred) Work Location: In person

Roles and Responsibilities MCPCB & PCB Designing (Altium Preferable) PCB Layout & Track Verification PCB Validation & Debugging Analog Circuit Designing Desired Candidate Profile Coordination with USA and Russian offices for PCB change implementation Footprint Creation & Gerber Verification. Various Analysis on existing Products & Upcoming Products on need basis. End to product management.

Key Responsibilities: Actively gather the necessary models and input to run the simulation from datasheets, supplier contacts, and websites. Perform PCB level SI and PI (DC & AC Drop) analysis and provide layout optimization recommendations based on the results. Perform S-parameter simulation and bench verification to verify and control matched impedances. Perform high-frequency Signal Integrity testing, including compliance and debugging required for product development. Needs to be detail-oriented, be able to document test plans, execute test procedures, and generate reports. Job Requirements and Skills Experience in the PCB design process: schematic capture, layout, generation of design files, BOMs, and release. Worked with schematic capture tools like OrCAD & Allegro PCB. Experience in the generation of Gerber files and PCB fabrication processes. Expert in the PCB layout process conforming to IPC standards and electrical and mechanical constraints of printed circuit board design, fabrication, and assembly. Componenet footprint/library creation. Experience in reading component datasheets. Experience in PCB stack-up analysis Hands-on experience in PCB modeling and Package modeling. Working knowledge of High-Speed design and RF principles (S-parameters, Impedance, etc.). Strong Signal/Power Integrity fundamentals Experience in simulating (FD/TD) memory interfaces for Board and Package is required (DDR3/DDR4, LPDDR3/4) Experience in simulating (FD/TD) High-Speed Serial IO interfaces for Board and Package is required (PCIe Gen3/4, RGMII...etc) Simultaneous switching output analysis Simulations of device I/O to reduce overshoot and undershoot (which can cause increased noise on power planes due to return currents). Crosstalk analysis of signals to reduce noise Good knowledge of Power Delivery Network, impedance profile analysis, IR Drop Analysis, modeling of PCB and Package Shapes, and time- domain Analysis. Experience 3 - 6 Years . Industry Engineering / Engineering Design / R&D / Quality Qualification B.E Key Skills PCB Designing PCB Designer Simulation Process

Experience in the PCB design process: schematic capture, layout, generation of design files, BOMs, and release. Worked with schematic capture tools like OrCAD & Allegro PCB. Hardware design, system/product level experience, Project Management. Product architecture experience based on different SoC. Experience In hardware/product development, integration, testing, compliance & support Project monitoring, controls & Delivery. Team Handling & Team Mentoring Proposal & RFQ handling, BOM costing & optimization. Digital, Analog, Mixed Signal Design Experience for consumer/industrial/medical markets ARM / Microcontroller Experience. Experience in High speed design like DDRx, PCIe, MIPI, LVDS interfaces Audio and Video Design Experience - Cameras, LCD, HDMI, NTSC/CVBS Test and Debug - Board Bring Up, Interface testing Instrument Knowledge - CROs, Logic Analysers, Spectrum Analyser, CMW500, protocol analyser. Experience in Multi-layer PCB Layout design approach & design reviews, SI knowledge. Exposure to design tools - ORCAD, Allegro. Customer communication and front ending for technical aspects. Design analysis for SI, PDN, Thermal, EMI/EMC. Product qualification / Compliances test experiences Experience in quality product release to customers.

About Euler : Euler Motors is an automotive OEM focused on transforming transportation in the country with Indias most powerful commercial electric vehicles. Today, Euler Motors stands as the front runner in the commercial EV space, building industry-leading EV technology for India, from India. We work towards building the best commercial EVs and a robust EV ecosystem to encourage faster EV adoption in India. Role: Hardware Design Engineers Location: Mohan Estate, Delhi Working - Monday to Saturday Technical Skills Required: Requirements 4-8 years of experience in hardware design or related fields. Strong knowledge of analog, digital & power electronics circuit design principles. Proficiency in ECAD software for schematic creation, PCB designing, and BOM management. Experience with hardware testing, debugging, and validation. Knowhow to use lab equipments like bench supplies, oscilloscopes, multimeters, logic analyzers etc Strong understanding of SI(signal integrity)/PI(power integrity), power distribution & thermal impacts, and EMI/EMC considerations. - Go to have Excellent problem-solving skills and attention to detail. Strong communication and collaboration abilities. Roles and Responsibilities : Design complex digital, analog & power circuits using ECAD tools. Extensive experience with Altium net classes, high voltage rules, variants and rooms Familiarity with Altium Designer PCB layout tools and schematic capture A good understanding of the PCB layout process and IPC Standards. Familiarity with PCB fabrication, design for manufacturing techniques for high volume designs Collaborate with cross-functional teams to ensure successful product development. Conduct EMI/EMC testing and analysis to meet industry standards. Ensure signal integrity through simulation-based design verification. Perform simulations and analyses to ensure design robustness. Familiarity with high voltage circuit board creepage and clearance requirements, with voltages up to 1500V Mentor junior engineers and provide technical guidance Regards Jerrin Jacob Assistant Manager-HR Euler Motors jerrin.jacob@eulermotors.com +91 9654358259

Role Overview and Responsibilities We are seeking an experienced and detail-oriented PCB Layout Designer to join our growing team in Hyderabad. In this role, you will play a key part in the development of high-reliability electronic hardware for space applications. You will be responsible for translating complex electrical schematics into manufacturable and space-qualified PCB layouts, adhering to stringent requirements for reliability, thermal performance, radiation tolerance, and EMI/EMC compliance. You will work collaboratively with cross-functional engineering teams to ensure layout designs meet both electrical and mechanical constraints and are suitable for harsh environmental conditions found in space missions. Key responsibilities include, but are not limited to: Translate complex schematics into optimized PCB layouts for space-grade hardware, including rigid and rigid-flex boards. Collaborate with electrical and mechanical engineers to define layout constraints such as thermal management, shielding, and placement strategy. Design multilayer PCBs with an emphasis on signal integrity, power integrity, EMI/EMC compliance, and mechanical reliability. Maintain and develop PCB footprints and schematic symbols as per IPC and company standards. Generate detailed manufacturing deliverables including Gerber files, assembly drawings, fabrication notes, and BOMs. Participate in design reviews and provide inputs based on layout best practices and space qualification needs. Support component selection, ensuring compatibility with radiation tolerance, thermal performance, and outgassing limitations. Apply relevant space agency standards such as ECSS, MIL-STD, and NASA guidelines in PCB layout and documentation. Support hardware qualification activities including test hardware layout and documentation. Maintain rigorous configuration management and version control of layout designs and ECAD libraries. Candidate Requirements Diploma or Bachelors in Electronics Engineering or a closely related discipline. Minimum of 5 years in PCB layout and design, including at least 2 years in aerospace or space-grade electronics development. Proficiency in EDA tools such as Altium Designer, OrCAD, or Mentor Graphics Expedition. In-depth knowledge of IPC standards (IPC-2221, IPC-7351, IPC-6012 Class 3/3A) and familiarity with ECSS, MIL-STD, and NASA layout guidelines. Expertise in grounding, shielding, and routing techniques to meet high EMI/EMC compliance standards. Strong documentation skills and experience using PLM systems or ECAD libraries for design and version control.

Role: Hardware Engineer Location: Hyderabad and Bangalore Experience : 3- 8 yrs Role & responsibilities Should have experience in Aerospace Industry. High speed Mixed Signal Design Expertise (FPGA, SoC, MPSoC, RFSoC, Versal). Knowledge in designing of power Modules (Regulators, Switchers, DC-DC convertors, etc). Understanding of schematic design in Orcad/Altium. Hands on experience in Design and debug on interfaces such as I2C, UART, SPI, AFDX, Ethernet, 1553 etc. Knowledge in memories Like Nand Flash, Nor Flash, SD-Ram(DDR), EEprom, NVSram,emmc. Knowledge in Circuit design, circuit simulation, calculation and analysis of circuit(SI, PI, Derating, MTBF ). Documentation. Good communication skills & Interaction with Clients/ Inspection agency.

Internal Job Title: Associate Principal Hardware Engineer Business: Lucy Electric Manufacturing & Technologies India Pvt Ltd Location: Halol, Vadodara, India Job Reference No: 3330 Why Us? Lucy Electric is a leader in secondary power distribution solutions with over 100 years’ industry experience. Specializing in high-performance medium voltage switchgear for utility, industrial and commercial applications, we enable the safe and reliable distribution of energy to homes and businesses worldwide. About This Role The Principal Hardware Engineer will be an integral part of the Automation Engineering team. As a key expert in hardware engineering, you will support and develop of hardware for the next generation Remote Terminal Unit (RTU) and other Lucy Automation products for Distribution Automation. Your role will involve utilizing skills, tools, and processes within the global team. The Principal Hardware Engineer will collaborate with the Project Manager, Product Manager, and other stakeholders to address hardware issues and bring the product to fruition, ensuring a successful release to end users. Responsibilities Within Our Team Analyze in design and development of hardware solutions for Automation engineering. Analyze scope and requirements, identifying and resolving hardware problems on high priority. Stay abreast of industry trends and advancements in firmware technologies, providing recommendations for improvement. Actively participate in hardware design and reviews. Support change management, testing, fault finding, prototype development, and production builds. Provide end-user support for both new and existing products. Collaborate within an agile, multi-disciplined team. Propose innovative solutions to technical challenges. Dimensions The role will eventually be based in the office, with some flexibility for remote work. Qualifications, Experience & Skills Skills: Analyze hardware scope and requirements. Experience of electronic Digital, Analog, and Power electronic design. Experience with ECAD tools for schematic capture, simulation, component selection, PCB design. Experience with tools like Cadence, ORCad, Proteus Experience in application of Design for Manufacturability (DFM) and Design for Testability (DFT) techniques. Experience in analyze in debugging and fault finding in new and existing designs. Experience in analyze of RFQ package for EMS provider and qualification of offers. Experience in EMI, EMC, Environmental, Mechanical standards, and type tests. Self-motivated, innovative, willing to pursue new technical areas and capable of working independently. Knowledge of MS Office applications, including Word, Power-Point, and Excel Desirable Knowledge: Experience to usage of test equipment like Omicron test set, Multimeter, Oscilloscope and maintenance of laboratory equipment  Experience of project/task planning Experience in using debuggers, simulators, and oscilloscope.  Safety critical hardware principles Electrical distribution systems Knowledge of MV distribution systems and switchgear Qualifications: Candidate should have a good degree in a relevant subject (Hardware Engineering or equivalent) and possess 16 to 20 years of hands-on engineering experience. Principal Hardware Engineer at Lucy Electric is innovative, flexible, methodical, patient, logical, enthusiastic, and open to new ideas. He/she will work in teams and enjoy learning and share knowledge. Does this sound interesting? We would love to hear from you. Our application process in quick and easy. Apply today!

Job Details: Skill: PCB design using OrCAD tool Experience: 2+ Years Notice Period: Immediate to 15 Days Employee type: Contract to Hire Technical requirements: Power & signal distribution and interface circuit development with associated component selection.

Job Title: Senior Embedded Hardware Engineer Location: Hyderabad Job Type: Fulltime Essential Competencies: Strong Technical capability in mixed embedded hardware design (analog and digital) by using 8 bit/16/32bit micro controllers or processors e.g. Renesas RL78-G13/G24 16-bit series, STM32 devices, etc Technical understanding and working knowledge with OPAMP, comparator, analog filters, ADC & analog signal conditioning circuits Technical understanding and working knowledge digital interfacing circuit Design experience of LDO's and switching DC-DC converters Design experience in driving Relay circuits and supervision of relay contacts Design for EMI/EMC requirements Design for Testability Design for Manufacturability Proficiency in Schematic capture tools like PADs and Altium designer tools High level Experience with PCB layout tools like PADS/Altium layout tools Proficiency in circuit analysis, circuit simulation using Pspice and worst-case circuit tolerance analysis Design experience of different interfaces like external memories, I2C, SPI, UART, RS232, RS485, BLE, LCD & touch screen interfaces etc. Must have handson experience debugging, troubleshooting embedded systems using emulators, JTAG\BDM debuggers etc Experience in design of EMI/EMC compliance system adhere to UL, CE & exposure certification testing Strong technical systems background, Solid written and verbal communication skills Passionate to learn new technologies and tools quickly and work in a highly collaborative team-oriented environment. Ability to adapt quickly to an existing, complex environment Detailed Responsibilities Review product requirements; create technical hardware specifications as well as system testing requirements Design & Development, modifications of embedded systems around 8/16/32 bit microcontrollers including interfacing with Analog & Digital components Create and maintain detailed schematics using PADS/Altium, components library, BOM and perform design Technical documentation for products Provide PCB layout design guidelines to PCB designers ,Technical Review of PCB Layout and maintain PCB Gerbers files Perform component selection for obsolescence, RoHS, Reach Provide detailed circuit analysis, tolerance analysis, circuit simulations Provide detailed Component Derating analysis, power consumption analysis, Thermal analysis Preparation of detailed test plans for the circuits designed Troubleshooting hardware, debug firmware and optimize performance Work closely with test labs for agency certifications like FCC/CE/UL/FM. Follow internal hardware and firmware development processes and contribute to process improvements. Drive and lead HW FMEA, identify high risk requirements and implement design controls accordingly

Technical Leadership Schematic Design Development boards Hardware Development RF Design & Wireless Tech: Hands-on exp. with RF layout practices, impedance matching, antenna selection/integration, (LoRa, BLE, Wi-Fi, GSM, NB-IoT, GPS). EDA Tools Required Candidate profile Bachelor or Master's Electrical Eng, Electronics Eng. related field. Min 6-7 years exp electronics hardware design, development, with focus on schematic design. Basic knowledge of Embedded-C, Python

Experience in initial schematic, multi-layer PCB design with strong understanding of design rules,knowledge of SMD package, creation of library and footprint,EMI-EMC compatible design skills and gerber generation. Required Candidate profile Qualification: Diploma / B.Tech in Electronics Minimum 1 year of experience, preferably in Power Electronics or fresher who has finished his training on PCB design.